[RTEMS Project] #4188: Quick Start 2.6 Not working for me and some tests failing for sparc-rtems6

[RTEMS trac]

#4188: Quick Start 2.6 Not working for me and some tests failing for sparc-rtems6
-----------------------+------------------------
  Reporter:  rmueller  |      Owner:  (none)
      Type:  defect    |     Status:  new
  Priority:  normal    |  Milestone:  Indefinite
 Component:  admin     |    Version:
  Severity:  normal    |   Keywords:  quickstart
Blocked By:            |   Blocking:
-----------------------+------------------------
 The chapter to test the test the built BSP is not working for me in its
 current form. I had to use the following command to perform the tests:

 rtems-test --rtems-bsp=erc32-sis ../../rtems/6/sparc-rtems6/erc32/tests

 But maybe I also did something wrong? I took care to follow the guide
 exactly and the BSP was not installed in the src path like recommended.
 Maybe it would be a good idea to update the command specified in 2.6.

 Also, some of the tests failed apparently:


 Passed:        577
 Failed:          3
 User Input:      6
 Expected Fail:   1
 Indeterminate:   0
 Benchmark:       3
 Timeout:         0
 Test too long:   0
 Invalid:         0
 Wrong Version:   0
 Wrong Build:     0
 Wrong Tools:     0
 ------------------
 Total:         590
 Failures:
 User Input:
  capture.exe
  dl10.exe
  fileio.exe
  monitor.exe
  termios.exe
  top.exe
 Expected Fail:
  psxfenv01.exe
 Benchmark:
  dhrystone.exe
  linpack.exe
  whetstone.exe
 Average test time: 0:00:00.264940
 Testing time     : 0:02:36.314482

 Kind Regards
 Robin

--
Ticket URL: <http://devel.rtems.org/ticket/4188>
RTEMS Project <http://www.rtems.org/>
RTEMS Project