Build Linux: PASSED 5/rtems-moxie.bset on x86_64-linux-gnu

joel at rtems.org joel at rtems.org
Wed Jun 20 00:22:47 UTC 2018


RTEMS Source Builder - Set Builder, 5 (9e95b79989a3)

Host: Linux-3.10.0-862.2.3.el7.x86_64-x86_64-with-centos-7.5.1804-Core
       Linux rtbf64c.rtems.com 3.10.0-862.2.3.el7.x86_64 #1 SMP Wed May 9
       18:05:47 UTC 2018 x86_64 x86_64

Build Time: 0:08:28.121678

Output
======

config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
installing: autoconf-2.69-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: automake-1.12.6-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Set: Time 0:00:15.800227
Build Set: Time 0:00:24.215054
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-linux-gnu-1
building: expat-2.1.0-x86_64-linux-gnu-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
config: tools/rtems-binutils-2.30.cfg
package: moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1
building: moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-2.30.cfg -> moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-2.30.cfg -> moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
package: moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1
building: moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1
reporting: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg -> moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg -> moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1.xml
config: tools/rtems-gdb-8.0.1-1.cfg
package: moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1
building: moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-8.0.1-1.cfg -> moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-8.0.1-1.cfg -> moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
building: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1.xml
config: tools/rtems-kernel-5.cfg
package: moxie-rtems5-kernel-5-1
building: moxie-rtems5-kernel-5-1
reporting: tools/rtems-kernel-5.cfg -> moxie-rtems5-kernel-5-1.txt
reporting: tools/rtems-kernel-5.cfg -> moxie-rtems5-kernel-5-1.xml
installing: dtc-1.4.1-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: expat-2.1.0-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1 -> /home/joel/rtems-work/tools/5
installing: moxie-rtems5-kernel-5-1 -> /home/joel/rtems-work/tools/5
cleaning: dtc-1.4.1-x86_64-linux-gnu-1
cleaning: expat-2.1.0-x86_64-linux-gnu-1
cleaning: moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1
cleaning: moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1
cleaning: moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1
cleaning: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
cleaning: moxie-rtems5-kernel-5-1
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:14:23 2018
==============================================================================
Report: devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.4.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.4.1-x86_64-linux-gnu-1
 Config: devel/dtc-1.4.1-1.cfg
 Summary:
  Device Tree Compiler v1.4.1 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://www.jdl.com/software/
 Version:
  1.4.1
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.4.1.tar.gz
       sha256: 03e74e4ee9378be15f19eb24197dfa32070efc3c85e93269e56d7ade133e359f
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.4.1
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.4.1
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS
  make PREFIX=/home/joel/rtems-work/tools/5
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.4.1
  make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-work/tools/5 install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:14:23 2018
==============================================================================
Report: devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.4.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.4.1-x86_64-linux-gnu-1
 Config: devel/dtc-1.4.1-1.cfg
 Summary:
  Device Tree Compiler v1.4.1 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://www.jdl.com/software/
 Version:
  1.4.1
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.4.1.tar.gz
       sha256: 03e74e4ee9378be15f19eb24197dfa32070efc3c85e93269e56d7ade133e359f
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.4.1
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.4.1
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS
  make PREFIX=/home/joel/rtems-work/tools/5
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.4.1
  make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-work/tools/5 install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:14:55 2018
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
 Config: devel/expat-2.1.0-1.cfg
 Summary:
  Expat XML Parser v2.1.0 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://expat.sourceforge.net/
 Version:
  2.1.0
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
       sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.1.0
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  ./configure \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --verbose \
  --prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec-prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
  --mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
  make -j 12 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:14:55 2018
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
 Config: devel/expat-2.1.0-1.cfg
 Summary:
  Expat XML Parser v2.1.0 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://expat.sourceforge.net/
 Version:
  2.1.0
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
       sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.1.0
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  ./configure \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --verbose \
  --prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec-prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
  --mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
  make -j 12 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:15:30 2018
==============================================================================
Report: tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.30.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1
 Config: tools/rtems-binutils-2.30.cfg
 Summary:
  Binutils v2.30 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.30
 Release:
  1
  Sources: 1
    1: ftp://ftp.gnu.org/gnu/binutils/binutils-2.30.tar.bz2
       sha512: c3ce91aa20f058ec589bf18c722bf651331b394db6378900cc813cc0eea3a331a96584d5ae090630b627369510397dccc9edfcd43d4aeefc99579f277a05c72c
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.30"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "moxie-rtems5" -o "x86_64-linux-gnu" == "moxie-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  ../${source_dir_binutils}/configure \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --target=moxie-rtems5 \
  --verbose --disable-nls \
  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
  --enable-deterministic-archives \
  --enable-64-bit-bfd \
  \
  --disable-lto \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec-prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
  --mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
  make -j 12 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:15:30 2018
==============================================================================
Report: tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.30.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-binutils-2.30-x86_64-linux-gnu-1
 Config: tools/rtems-binutils-2.30.cfg
 Summary:
  Binutils v2.30 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.30
 Release:
  1
  Sources: 1
    1: ftp://ftp.gnu.org/gnu/binutils/binutils-2.30.tar.bz2
       sha512: c3ce91aa20f058ec589bf18c722bf651331b394db6378900cc813cc0eea3a331a96584d5ae090630b627369510397dccc9edfcd43d4aeefc99579f277a05c72c
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.30"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "moxie-rtems5" -o "x86_64-linux-gnu" == "moxie-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  ../${source_dir_binutils}/configure \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --target=moxie-rtems5 \
  --verbose --disable-nls \
  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
  --enable-deterministic-archives \
  --enable-64-bit-bfd \
  \
  --disable-lto \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec-prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
  --mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
  make -j 12 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/moxie-rtems5-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/moxie-rtems5-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:20:36 2018
==============================================================================
Report: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1
 Config: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
 Summary:
  GCC v7.3.0 and Newlib v3.0.0 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://gcc.gnu.org/
 Version:
  7.3.0
 Release:
  1
  Sources: 5
    1: ftp://sourceware.org/pub/newlib/newlib-3.0.0.tar.gz
       sha512: d4730ce9a4fc4e62052e89d20d4a3855a103b3d1a2818e94c7a68626db285aa8db8e56a684103731916bfba3e581db88e3a93264034ea0f2880ee8976283c04f
    2: https://ftp.gnu.org/gnu/gcc/gcc-7.3.0/gcc-7.3.0.tar.xz
       sha512: ad41a7e4584e40e92cdf860bc0288500fbaf5dfb7e8c3fcabe9eba809c87bcfa85b46c19c19921b0cdf6d05483faede8287bb9ea120c0d1559449a70e602c8d4
    3: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
    4: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    5: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
       sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gcc_source="gcc-7.3.0"
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib="newlib-3.0.0"
  %setup source newlib -q -D -n newlib-3.0.0
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_mpfr="mpfr-3.1.4"
  %setup source mpfr -q -D -n mpfr-3.1.4
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.1.0"
  %setup source gmp -q -D -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 5, RSB 9e95b79989a35befdef1ea363018878298ba4d88, Newlib 3.0.0" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "moxie-rtems5" -o "x86_64-linux-gnu" == "moxie-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  ../${source_dir_gcc}/configure \
  --prefix=/home/joel/rtems-work/tools/5 \
  --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec_prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include \
  --libdir=/home/joel/rtems-work/tools/5/lib \
  --libexecdir=/home/joel/rtems-work/tools/5/libexec \
  --mandir=/home/joel/rtems-work/tools/5/share/man \
  --infodir=/home/joel/rtems-work/tools/5/share/info \
  --datadir=/home/joel/rtems-work/tools/5/share \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --target=moxie-rtems5 \
  --disable-libstdcxx-pch \
  --with-gnu-as --with-gnu-ld --verbose \
  --with-newlib \
  --disable-nls --without-included-gettext \
  --disable-win32-registry \
  --enable-version-specific-runtime-libs \
  --disable-lto \
  --enable-newlib-io-c99-formats \
  \
  --enable-newlib-iconv \
  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
  --enable-threads \
  --disable-plugin \
  \
  --enable-libgomp \
  \
  --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  make -j 12 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/bin/moxie-rtems5-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:20:37 2018
==============================================================================
Report: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gcc-7.3.0-newlib-3.0.0-x86_64-linux-gnu-1
 Config: tools/rtems-gcc-7.3.0-newlib-3.0.0.cfg
 Summary:
  GCC v7.3.0 and Newlib v3.0.0 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://gcc.gnu.org/
 Version:
  7.3.0
 Release:
  1
  Sources: 5
    1: ftp://sourceware.org/pub/newlib/newlib-3.0.0.tar.gz
       sha512: d4730ce9a4fc4e62052e89d20d4a3855a103b3d1a2818e94c7a68626db285aa8db8e56a684103731916bfba3e581db88e3a93264034ea0f2880ee8976283c04f
    2: https://ftp.gnu.org/gnu/gcc/gcc-7.3.0/gcc-7.3.0.tar.xz
       sha512: ad41a7e4584e40e92cdf860bc0288500fbaf5dfb7e8c3fcabe9eba809c87bcfa85b46c19c19921b0cdf6d05483faede8287bb9ea120c0d1559449a70e602c8d4
    3: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
    4: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    5: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
       sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gcc_source="gcc-7.3.0"
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib="newlib-3.0.0"
  %setup source newlib -q -D -n newlib-3.0.0
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_mpfr="mpfr-3.1.4"
  %setup source mpfr -q -D -n mpfr-3.1.4
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.1.0"
  %setup source gmp -q -D -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 5, RSB 9e95b79989a35befdef1ea363018878298ba4d88, Newlib 3.0.0" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "moxie-rtems5" -o "x86_64-linux-gnu" == "moxie-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  ../${source_dir_gcc}/configure \
  --prefix=/home/joel/rtems-work/tools/5 \
  --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec_prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include \
  --libdir=/home/joel/rtems-work/tools/5/lib \
  --libexecdir=/home/joel/rtems-work/tools/5/libexec \
  --mandir=/home/joel/rtems-work/tools/5/share/man \
  --infodir=/home/joel/rtems-work/tools/5/share/info \
  --datadir=/home/joel/rtems-work/tools/5/share \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --target=moxie-rtems5 \
  --disable-libstdcxx-pch \
  --with-gnu-as --with-gnu-ld --verbose \
  --with-newlib \
  --disable-nls --without-included-gettext \
  --disable-win32-registry \
  --enable-version-specific-runtime-libs \
  --disable-lto \
  --enable-newlib-io-c99-formats \
  \
  --enable-newlib-iconv \
  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
  --enable-threads \
  --disable-plugin \
  \
  --enable-libgomp \
  \
  --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  make -j 12 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/bin/moxie-rtems5-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:22:24 2018
==============================================================================
Report: tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.0.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1
 Config: tools/rtems-gdb-8.0.1-1.cfg
 Summary:
  GDB v8.0.1 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  8.0.1
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz
       sha512: 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1
  Patches: 1
    1: https://gaisler.org/gdb/gdb-8.0.1-sis-leon2-leon3.diff
       sha512: f8aa851f50feb063dd63fc10018ed638c5bd1708b6b9f5d1c1e1030c8d30a24de3506bb233cc5e7e4392ed400448b59f4c71584a22ea28878295d6d87ff79342
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-8.0.1"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "moxie-rtems5" -o "x86_64-linux-gnu" == "moxie-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC} \
  LIBS=${GDB_LIBS} \
  ../${source_dir_gdb}/configure \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --target=moxie-rtems5 \
  --verbose --disable-nls \
  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
  \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --enable-sim \
  \
  --without-zlib \
  --with-expat \
  --with-guile=no \
  --with-python \
  --prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec-prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
  --mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
  make -j 12 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:22:25 2018
==============================================================================
Report: tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.0.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gdb-8.0.1-x86_64-linux-gnu-1
 Config: tools/rtems-gdb-8.0.1-1.cfg
 Summary:
  GDB v8.0.1 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  8.0.1
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz
       sha512: 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1
  Patches: 1
    1: https://gaisler.org/gdb/gdb-8.0.1-sis-leon2-leon3.diff
       sha512: f8aa851f50feb063dd63fc10018ed638c5bd1708b6b9f5d1c1e1030c8d30a24de3506bb233cc5e7e4392ed400448b59f4c71584a22ea28878295d6d87ff79342
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-8.0.1"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "moxie-rtems5" -o "x86_64-linux-gnu" == "moxie-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC} \
  LIBS=${GDB_LIBS} \
  ../${source_dir_gdb}/configure \
  --build=x86_64-linux-gnu --host=x86_64-linux-gnu \
  --target=moxie-rtems5 \
  --verbose --disable-nls \
  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
  \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --enable-sim \
  \
  --without-zlib \
  --with-expat \
  --with-guile=no \
  --with-python \
  --prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
  --exec-prefix=/home/joel/rtems-work/tools/5 \
  --includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
  --mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
  make -j 12 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:22:36 2018
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
 Config: tools/rtems-tools-5-1.cfg
 Summary:
  RTEMS Tools 845054a2ac1f470c5dd79361646be0243bb91160 for host x86_64-linux-gnu
 URL:
  http://www.rtems.org/
 Version:
  845054a2ac1f470c5dd79361646be0243bb91160
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160.tar.bz2
       sha512: d95f00d5e8457fed98853da3e65ef0c18393bf4bb4b8ef59d1ab296f2661dba9771c18075809a6c6c3b186a3823fc86f64230bb4b808f40a617dc235902155c5
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  RT_HOST="--host=x86_64-linux-gnu"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-work/tools/5
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT_WAF install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:22:36 2018
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
 Config: tools/rtems-tools-5-1.cfg
 Summary:
  RTEMS Tools 845054a2ac1f470c5dd79361646be0243bb91160 for host x86_64-linux-gnu
 URL:
  http://www.rtems.org/
 Version:
  845054a2ac1f470c5dd79361646be0243bb91160
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160.tar.bz2
       sha512: d95f00d5e8457fed98853da3e65ef0c18393bf4bb4b8ef59d1ab296f2661dba9771c18075809a6c6c3b186a3823fc86f64230bb4b808f40a617dc235902155c5
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  RT_HOST="--host=x86_64-linux-gnu"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-work/tools/5
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT_WAF install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:22:37 2018
==============================================================================
Report: tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-kernel-5.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-kernel-5-1
 Config: tools/rtems-kernel-5.cfg
 Summary:
  RTEMS v5 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://www.rtems.org/
 Version:
  5
 Release:
  1
  Sources: 0
  Patches: 0
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:22:37 2018
==============================================================================
Report: tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-kernel-5.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-kernel-5-1
 Config: tools/rtems-kernel-5.cfg
 Summary:
  RTEMS v5 for target moxie-rtems5 on host x86_64-linux-gnu
 URL:
  http://www.rtems.org/
 Version:
  5
 Release:
  1
  Sources: 0
  Patches: 0


More information about the build mailing list