[PATCH] Revert "bsps/arm/beagle/dcan: Added DCAN support"

[Karel Gardas]

   Folks,

this patch revert was missing in Gedare's series of reverting CAN-based 
patches in preparation for RTEMS 6 release. Due to this all beagleboard 
based BSPs fail to build due to error like:

Failures:
    1 debug arm/beagleboardorig build:
       configure: /export/home/rtems/git/rtems/ACTIVE_ZONE/stm32h7-new-\
       hal/waf configure --prefix=/tmp/rtems-test.1033228\
       --top=/export/home/rtems/git/rtems/ACTIVE_ZONE/stm32h7-new-hal\
       --rtems-config=config-arm-beagleboardorig-debug.ini
      error: export/home/rtems/git/bsps/arm/beagle/dcan/am335x-
             dcan.c:37:10: fatal error: dev/can/can.h: No such file or
             directory



Thanks,
Karel

On 7/31/23 20:07, Karel Gardas wrote:
> This reverts commit 26d50bdfb601b9ef71ec2b30d2d9467c2437f443.
> ---
>   bsps/arm/beagle/dcan/am335x-dcan.c            |  104 -
>   bsps/arm/beagle/dcan/dcan.c                   |  646 --
>   bsps/arm/beagle/dcan/hw_cm_per.h              | 1407 ---
>   bsps/arm/beagle/dcan/hw_dcan.h                | 1289 ---
>   bsps/arm/beagle/include/bsp/am335x_dcan.h     |  106 -
>   .../beagle/include/bsp/hw_control_AM335x.h    | 7794 -----------------
>   bsps/arm/beagle/include/bsp/soc_AM335x.h      |  206 -
>   spec/build/bsps/arm/beagle/obj.yml            |    2 -
>   8 files changed, 11554 deletions(-)
>   delete mode 100644 bsps/arm/beagle/dcan/am335x-dcan.c
>   delete mode 100644 bsps/arm/beagle/dcan/dcan.c
>   delete mode 100755 bsps/arm/beagle/dcan/hw_cm_per.h
>   delete mode 100755 bsps/arm/beagle/dcan/hw_dcan.h
>   delete mode 100644 bsps/arm/beagle/include/bsp/am335x_dcan.h
>   delete mode 100755 bsps/arm/beagle/include/bsp/hw_control_AM335x.h
>   delete mode 100755 bsps/arm/beagle/include/bsp/soc_AM335x.h