<div dir="ltr">Ok.<div>But back to the bug.</div><div>The behaviour I described should be reproducible by removing SD-Card after it was mounted.</div><div>And then the System should freeze when open is called on some file on SD-Card.</div><div>System freezes can't be wanted behaviour.</div><div><br></div><div>Best,</div><div>Nils</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, 16 Aug 2019 at 11:40, Christian Mauderer <<a href="mailto:list@c-mauderer.de">list@c-mauderer.de</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">PS: If neither the SD nor the eMMC has a bootable image your BBB falls<br>
back to serial and then USB boot anyway. So no need to change any boot pins.<br>
<br>
On 16/08/2019 11:38, Christian Mauderer wrote:<br>
> Hello Nils,<br>
> <br>
> if the U-Boot doesn't start from eMMC any more it won't be easy.<br>
> Theoretically it is possible to boot via serial. See for example<br>
> <br>
> <a href="http://linuxkernel51.blogspot.com/2015/08/booting-beagle-bone-black-over-uart.html" rel="noreferrer" target="_blank">http://linuxkernel51.blogspot.com/2015/08/booting-beagle-bone-black-over-uart.html</a><br>
> <br>
> With that you could load an U-Boot (via X-Modem) that could start a<br>
> system from USB (image from Beagle home page maybe could work if it can<br>
> boot from USB) that could re-write the eMMC. Most likely it would need a<br>
> few hours to a day to figure out the details. So you should definitively<br>
> order a replacement as a backup solution.<br>
> <br>
> Best regards<br>
> <br>
> Christian<br>
> <br>
> On 16/08/2019 11:13, Nils Hölscher wrote:<br>
>> Hi Christin,<br>
>><br>
>> Thanks for the hint.<br>
>> But how can I alter the U- Boot on eMMC?<br>
>> Problem is I have a Linux version with an U-Boot that disables emmc on<br>
>> the emmc...<br>
>> And I guess I cant flash emmc without SD.<br>
>><br>
>> Best,<br>
>> Nils<br>
>><br>
>> On Fri, 16 Aug 2019 at 11:03, Christian Mauderer <<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>> wrote:<br>
>><br>
>> On 16/08/2019 10:55, Nils Hölscher wrote:<br>
>> > Hi,<br>
>> ><br>
>> > It seems the problem was hardware related.<br>
>> > My SD-Card connector just died.<br>
>> > I hope I can get a new BBB oin a timely manner.<br>
>> ><br>
>> > Best,<br>
>> > Nils<br>
>><br>
>> Hello Nils,<br>
>><br>
>> thanks for the information. That's annoying. Good luck finding a<br>
>> replacement.<br>
>><br>
>> For a quick workaround: I haven't tried that yet but if your on-board<br>
>> eMMC is still intact, you might can use that U-Boot to boot from USB.<br>
>><br>
>> Best regards<br>
>><br>
>> Christian<br>
>><br>
>> ><br>
>> > On Fri, 16 Aug 2019 at 10:48, Christian Mauderer<br>
>> <<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>> wrote:<br>
>> ><br>
>> > Hello Nils,<br>
>> ><br>
>> > thanks for the file list. I can't reproduce your problem with it.<br>
>> ><br>
>> > On 16/08/2019 10:01, Nils Hölscher wrote:<br>
>> > > Hi,<br>
>> > ><br>
>> > > Short update.<br>
>> > ><br>
>> > > It seems the device only hangs while I am connected with the<br>
>> debugger.<br>
>> ><br>
>> > Is that true for the original file system tree? You are<br>
>> debugging via<br>
>> > Ethernet, right? In that case I would lean more toward a<br>
>> problem with<br>
>> > the debugger support than the file system. Do you have enough file<br>
>> > descriptors configured?<br>
>> ><br>
>> > Best regards<br>
>> ><br>
>> > Christian<br>
>> ><br>
>> > > looks like a Heisenberg bug.<br>
>> > ><br>
>> > > Best,<br>
>> > > Nils<br>
>> > ><br>
>> > > On Fri, 16 Aug 2019 at 09:50, Nils Hölscher<br>
>> <<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a> <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a>><br>
>> > <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a> <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a>>><br>
>> > > <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a> <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a>><br>
>> <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a> <mailto:<a href="mailto:nilhoel1@gmail.com" target="_blank">nilhoel1@gmail.com</a>>>>> wrote:<br>
>> > ><br>
>> > ><br>
>> > > On Thu, 15 Aug 2019 at 19:51, Christian Mauderer<br>
>> > <<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>> wrote:<br>
>> > ><br>
>> > > Hello Nils,<br>
>> > ><br>
>> > > maybe another bug in our FAT file system...<br>
>> > ><br>
>> > > Please do three things:<br>
>> > ><br>
>> > > 1. Create an image of your current card (with dd or<br>
>> a similar<br>
>> > > tool). FAT<br>
>> > > bugs are sometimes hard to reproduce but it's really<br>
>> > urgent that<br>
>> > > we fix<br>
>> > > them. So maybe I'll ask for that image later.<br>
>> > ><br>
>> > > I did that. <br>
>> > > Let me know if you need the image.<br>
>> > ><br>
>> > > 2. Create a complete list of the files on your card (for<br>
>> > example the<br>
>> > > Linux `tree -h` command), post it here and tell me<br>
>> what you<br>
>> > > tried to open.<br>
>> > ><br>
>> > > .<br>
>> > > ├── [ 50K] am335x-boneblack.dtb<br>
>> > > ├── [ 49K] am335x-boneblack+pruss.dtb<br>
>> > > ├── [ 883] AM335X-PRU-UIO-00A0.dtbo<br>
>> > > ├── [ 649] AM335X-PRU-UIO-BSD-00A0.dtbo<br>
>> > > ├── [162K] Linux-with-UIO.dtb<br>
>> > > ├── [ 44] loob.bin<br>
>> > > ├── [108K] MLO<br>
>> > > ├── [2.1M] pru.exe.img<br>
>> > > ├── [ 12] test.bin<br>
>> > > ├── [471K] u-boot.img<br>
>> > > ├── [ 390] uEnvLinuxfdt.txt<br>
>> > > └── [ 560] uEnv.txt<br>
>> > ><br>
>> > > 3. Try another name / folder for the file you wanted to<br>
>> > open.\<br>
>> > ><br>
>> > > I moved the file in another folder and renamed it.<br>
>> > > It now works but I got en error, I am currently<br>
>> investigating if<br>
>> > > this is on the pru driver side or not.<br>
>> > > The tree while doing this was:<br>
>> > > .<br>
>> > > ├── [ 50K] am335x-boneblack.dtb<br>
>> > > ├── [ 49K] am335x-boneblack+pruss.dtb<br>
>> > > ├── [ 883] AM335X-PRU-UIO-00A0.dtbo<br>
>> > > ├── [ 649] AM335X-PRU-UIO-BSD-00A0.dtbo<br>
>> > > ├── [162K] Linux-with-UIO.dtb<br>
>> > > ├── [ 44] loob.bin<br>
>> > > ├── [108K] MLO<br>
>> > > ├── [2.1M] pru.exe.img<br>
>> > > ├── [2.0K] test<br>
>> > > │ └── [ 12] test2.bin<br>
>> > > ├── [ 12] test2.bin<br>
>> > > ├── [471K] u-boot.img<br>
>> > > ├── [ 390] uEnvLinuxfdt.txt<br>
>> > > └── [ 560] uEnv.txt<br>
>> > ><br>
>> > ><br>
>> > > Thanks,<br>
>> > > Nils <br>
>> > ><br>
>> > > Best regards<br>
>> > ><br>
>> > > Christian<br>
>> > ><br>
>> > > On 15/08/2019 19:32, Nils Hölscher wrote:<br>
>> > > > Hi Christian,<br>
>> > > ><br>
>> > > > The commands ls and cat work.<br>
>> > > > I just tested them, this seems kinda awkward.<br>
>> > > ><br>
>> > > > Best,<br>
>> > > > Nils<br>
>> > > ><br>
>> > > > On Thu, 15 Aug 2019 at 19:27, Christian Mauderer<br>
>> > > <<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>>> wrote:<br>
>> > > ><br>
>> > > > Hello Nils,<br>
>> > > ><br>
>> > > > does some other access to the file system<br>
>> work? Like<br>
>> > a ls<br>
>> > > on the console<br>
>> > > > or creating a file. Can you do a `cat` on some<br>
>> text file<br>
>> > > on the file<br>
>> > > > system? If not: Does it work for a file in the<br>
>> root file<br>
>> > > system (should<br>
>> > > > be a IMFS)?<br>
>> > > ><br>
>> > > > Best regards<br>
>> > > ><br>
>> > > > Christian<br>
>> > > ><br>
>> > > > On 15/08/2019 15:54, Nils Hölscher wrote:<br>
>> > > > > Hi,<br>
>> > > > ><br>
>> > > > > I when my app wants to open a file on the SD<br>
>> card<br>
>> > > dev=mmcsd-0-0 rtems<br>
>> > > > > freezes.<br>
>> > > > > Exact call is:<br>
>> > > > > fd = open(file, O_RDONLY);<br>
>> > > > > With file being the pru binary I want to upload.<br>
>> > > > ><br>
>> > > > > Thanks,<br>
>> > > > > Nils<br>
>> > > > ><br>
>> > > > > On Tue, 13 Aug 2019 at 17:56, Christian Mauderer<br>
>> > > > > <<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>><br>
>> > > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>>><br>
>> > > > ><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>><br>
>> > > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>>>>> wrote:<br>
>> > > > ><br>
>> > > > > Hello Nils,<br>
>> > > > ><br>
>> > > > > a third possibility: You could start a<br>
>> FTP server<br>
>> > > and push the<br>
>> > > > file<br>
>> > > > > via network.<br>
>> > > > ><br>
>> > > > > Best regards<br>
>> > > > ><br>
>> > > > > Christian<br>
>> > > > ><br>
>> > > > > Am Dienstag, 13. August 2019 schrieb Nils<br>
>> > Hölscher:<br>
>> > > > > > Hi,<br>
>> > > > > ><br>
>> > > > > ><br>
>> > > > > > Thanks for the input I will try the SD<br>
>> card<br>
>> > first.<br>
>> > > > > > That way I won't have to alter the<br>
>> code when I<br>
>> > > want to run other<br>
>> > > > > stuff on the pru.<br>
>> > > > > ><br>
>> > > > > ><br>
>> > > > > > Best,<br>
>> > > > > > Nils<br>
>> > > > > ><br>
>> > > > > ><br>
>> > > > > > On Tue, 13 Aug 2019 at 17:32, Gedare Bloom<br>
>> > > <<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>>><br>
>> > > > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>>>><br>
>> > > > > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>>><br>
>> > > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>><br>
>> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a> <mailto:<a href="mailto:gedare@rtems.org" target="_blank">gedare@rtems.org</a>>>>>>> wrote:<br>
>> > > > > ><br>
>> > > > > > You can also build the PRU image into<br>
>> the RTEMS<br>
>> > > binary. See<br>
>> > > > > > examples-v2.git/file_io/crc/init.c<br>
>> > > > > ><br>
>> > > > > > On Tue, Aug 13, 2019 at 8:46 AM Christian<br>
>> > Mauderer<br>
>> > > > > <<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>><br>
>> > > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>>>> wrote:<br>
>> > > > > > ><br>
>> > > > > > > Hello Nils,<br>
>> > > > > > ><br>
>> > > > > > > that's a bit odd. I attached an expected<br>
>> > output<br>
>> > > below.<br>
>> > > > Some guesses:<br>
>> > > > > > ><br>
>> > > > > > > - Did you add FAT file system to your<br>
>> > application?<br>
>> > > > > > > - Is there some odd formatting on<br>
>> the SD?<br>
>> > > Normally at<br>
>> > > > least the FAT<br>
>> > > > > > > partition used by U-Boot should be<br>
>> visible.<br>
>> > > > > > > - Is your BDBUF configuration OK?<br>
>> > > > > > > - Do you have enough file descriptors?<br>
>> > > > > > ><br>
>> > > > > > > Beneath that: If you only need<br>
>> something where<br>
>> > > you can put<br>
>> > > > some<br>
>> > > > > files,<br>
>> > > > > > > you can try to connect a USB stick<br>
>> instead.<br>
>> > > Maybe that<br>
>> > > > works better.<br>
>> > > > > > ><br>
>> > > > > > > Best regards<br>
>> > > > > > ><br>
>> > > > > > > Christian<br>
>> > > > > > ><br>
>> > > > > > ><br>
>> > > > > > > media listener: event = DISK ATTACH,<br>
>> state =<br>
>> > > INQUIRY, src<br>
>> > > > = mmcsd<br>
>> > > > > > > media listener: event = DISK ATTACH,<br>
>> state =<br>
>> > > SUCCESS, src =<br>
>> > > > > mmcsd, dest<br>
>> > > > > > > = /dev/mmcsd-0<br>
>> > > > > > > media listener: event = MOUNT, state =<br>
>> > INQUIRY,<br>
>> > > src =<br>
>> > > > /dev/mmcsd-0<br>
>> > > > > > > mmcsd0: 4GB <SDHC TO 15.15 SN<br>
>> 000002F6 MFG<br>
>> > > 02/2017 by 25<br>
>> > > > DY> at mmc0<br>
>> > > > > > > 24.0MHz/4bit/65535-block<br>
>> > > > > > > media listener: event = MOUNT, state =<br>
>> > FAILED, src =<br>
>> > > > /dev/mmcsd-0<br>
>> > > > > > > media listener: event = PARTITION<br>
>> INQUIRY,<br>
>> > state =<br>
>> > > > INQUIRY, src =<br>
>> > > > > > > /dev/mmcsd-0<br>
>> > > > > > > media listener: event = PARTITION<br>
>> INQUIRY,<br>
>> > state =<br>
>> > > > SUCCESS, src =<br>
>> > > > > > > /dev/mmcsd-0<br>
>> > > > > > > media listener: event = PARTITION<br>
>> ATTACH,<br>
>> > state<br>
>> > > = INQUIRY,<br>
>> > > > src =<br>
>> > > > > > > /dev/mmcsd-0<br>
>> > > > > > > media listener: event = PARTITION<br>
>> ATTACH,<br>
>> > state<br>
>> > > = SUCCESS,<br>
>> > > > src =<br>
>> > > > > > > /dev/mmcsd-0, dest = /dev/mmcsd-0-0<br>
>> > > > > > > media listener: event = MOUNT, state =<br>
>> > INQUIRY,<br>
>> > > src =<br>
>> > > > /dev/mmcsd-0-0<br>
>> > > > > > > media listener: event = MOUNT, state =<br>
>> > SUCCESS,<br>
>> > > src =<br>
>> > > > > /dev/mmcsd-0-0,<br>
>> > > > > > > dest = /media/mmcsd-0-0<br>
>> > > > > > > media listener: event = DISK ATTACH,<br>
>> state =<br>
>> > > INQUIRY, src<br>
>> > > > = mmcsd<br>
>> > > > > > > media listener: event = DISK ATTACH,<br>
>> state =<br>
>> > > SUCCESS, src =<br>
>> > > > > mmcsd, dest<br>
>> > > > > > > = /dev/mmcsd-1<br>
>> > > > > > > media listener: event = MOUNT, state =<br>
>> > INQUIRY,<br>
>> > > src =<br>
>> > > > /dev/mmcsd-1<br>
>> > > > > > > mmcsd1: 4GB <MMCHC MMC04G 5.8 SN<br>
>> 160D224B MFG<br>
>> > > 09/2014 by 112<br>
>> > > > > 0x0000> at<br>
>> > > > > > > mmc1 48.0MHz/8bit/65535-block<br>
>> > > > > > > media listener: event = MOUNT, state =<br>
>> > FAILED, src =<br>
>> > > > /dev/mmcsd-1<br>
>> > > > > > > media listener: event = PARTITION<br>
>> INQUIRY,<br>
>> > state =<br>
>> > > > INQUIRY, src =<br>
>> > > > > > > /dev/mmcsd-1<br>
>> > > > > > > media listener: event = PARTITION<br>
>> INQUIRY,<br>
>> > state<br>
>> > > = FAILED,<br>
>> > > > src =<br>
>> > > > > > > /dev/mmcsd-1<br>
>> > > > > > > media listener: event = DISK ATTACH,<br>
>> state =<br>
>> > > INQUIRY, src =<br>
>> > > > > mmcsd1boot<br>
>> > > > > > > mmcsd1boot0: 2MB partion 1 at mmcsd1<br>
>> > > > > > > mmcsd1boot1: 2MB partion 2 at mmcsd1<br>
>> > > > > > > mmcsd1rpmb: 131kB partion 3 at mmcsd1<br>
>> > > > > > ><br>
>> > > > > > ><br>
>> > > > > > > On 13/08/2019 13:30, Nils Hölscher<br>
>> wrote:<br>
>> > > > > > > > Hi,<br>
>> > > > > > > ><br>
>> > > > > > > > Thanks for the help.<br>
>> > > > > > > > I tried to use your code, but I<br>
>> always get<br>
>> > > "ERROR: SD<br>
>> > > > could not be<br>
>> > > > > > > > mounted after timeout".<br>
>> > > > > > > > Even after raising the waiting time.<br>
>> > > > > > > ><br>
>> > > > > > > > The sources I use start here:<br>
>> > > > > > > ><br>
>> > > > <br>
>> > > <br>
>> > <br>
>> <a href="https://github.com/nilhoel1/rtems-pru/blob/pruss-shell/main.c#L110" rel="noreferrer" target="_blank">https://github.com/nilhoel1/rtems-pru/blob/pruss-shell/main.c#L110</a><br>
>> > > > > > > ><br>
>> > > > > > > > And my uart output is:<br>
>> > > > > > > > ""<br>
>> > > > > > > > waiting for SD...<br>
>> > > > > > > ><br>
>> > > > > > > > usbus0: 480Mbps High Speed USB v2.0<br>
>> > > > > > > > usbus1: 480Mbps High Speed USB v2.0<br>
>> > > > > > > > media listener: event = DISK<br>
>> ATTACH, state =<br>
>> > > INQUIRY,<br>
>> > > > src = mmcsd<br>
>> > > > > > > > media listener: event = DISK<br>
>> ATTACH, state =<br>
>> > > SUCCESS, src =<br>
>> > > > > mmcsd, dest<br>
>> > > > > > > > = /dev/mmcsd-0<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > > INQUIRY, src =<br>
>> > > > /dev/mmcsd-0<br>
>> > > > > > > > ugen0.1: <Mentor Graphics OTG Root<br>
>> HUB><br>
>> > at usbus0<br>
>> > > > > > > > ugen1.1: <Mentor Graphics OTG Root<br>
>> HUB><br>
>> > at usbus1<br>
>> > > > > > > > uhub0: <Mentor Graphics OTG Root<br>
>> HUB, class<br>
>> > > 9/0, rev<br>
>> > > > > 2.00/1.00, addr 1><br>
>> > > > > > > > on usbus0<br>
>> > > > > > > > uhub1: <Mentor Graphics OTG Root<br>
>> HUB, class<br>
>> > > 9/0, rev<br>
>> > > > > 2.00/1.00, addr 1><br>
>> > > > > > > > on usbus1<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > FAILED,<br>
>> > > src =<br>
>> > > > /dev/mmcsd-0<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > INQUIRY, state =<br>
>> > > > INQUIRY, src =<br>
>> > > > > > > > /dev/mmcsd-0<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > INQUIRY, state =<br>
>> > > > SUCCESS, src =<br>
>> > > > > > > > /dev/mmcsd-0<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > ATTACH, state =<br>
>> > > > INQUIRY, src =<br>
>> > > > > > > > /dev/mmcsd-0<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > ATTACH, state =<br>
>> > > > SUCCESS, src =<br>
>> > > > > > > > /dev/mmcsd-0, dest = /dev/mmcsd-0-0<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > > INQUIRY, src =<br>
>> > > > > /dev/mmcsd-0-0<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > FAILED,<br>
>> > > src =<br>
>> > > > > /dev/mmcsd-0-0<br>
>> > > > > > > > media listener: event = DISK<br>
>> ATTACH, state =<br>
>> > > INQUIRY,<br>
>> > > > src = mmcsd<br>
>> > > > > > > > media listener: event = DISK<br>
>> ATTACH, state =<br>
>> > > SUCCESS, src =<br>
>> > > > > mmcsd, dest<br>
>> > > > > > > > = /dev/mmcsd-1<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > > INQUIRY, src =<br>
>> > > > /dev/mmcsd-1<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > FAILED,<br>
>> > > src =<br>
>> > > > /dev/mmcsd-1<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > INQUIRY, state =<br>
>> > > > INQUIRY, src =<br>
>> > > > > > > > /dev/mmcsd-1<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > INQUIRY, state =<br>
>> > > > SUCCESS, src =<br>
>> > > > > > > > /dev/mmcsd-1<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > ATTACH, state =<br>
>> > > > INQUIRY, src =<br>
>> > > > > > > > /dev/mmcsd-1<br>
>> > > > > > > > media listener: event = PARTITION<br>
>> > ATTACH, state =<br>
>> > > > SUCCESS, src =<br>
>> > > > > > > > /dev/mmcsd-1, dest = /dev/mmcsd-1-0<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > > INQUIRY, src =<br>
>> > > > > /dev/mmcsd-1-0<br>
>> > > > > > > > media listener: event = MOUNT, state =<br>
>> > FAILED,<br>
>> > > src =<br>
>> > > > > /dev/mmcsd-1-0<br>
>> > > > > > > > media listener: event = DISK<br>
>> ATTACH, state =<br>
>> > > INQUIRY, src =<br>
>> > > > > mmcsd1boot<br>
>> > > > > > > > uhub0: 1 port with 1 removable,<br>
>> self powered<br>
>> > > > > > > > uhub1: 1 port with 1 removable,<br>
>> self powered<br>
>> > > > > > > > ERROR: SD could not be mounted<br>
>> after timeout<br>
>> > > > > > > > ""<br>
>> > > > > > > ><br>
>> > > > > > > > Thanks,<br>
>> > > > > > > > Nils<br>
>> > > > > > > ><br>
>> > > > > > > > On Mon, 12 Aug 2019 at 18:01,<br>
>> Christian<br>
>> > Mauderer<br>
>> > > > > <<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>><br>
>> > > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>>><br>
>> > > > > > > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>><br>
>> > > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>><br>
>> > > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>><br>
>> > <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>><br>
>> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a> <mailto:<a href="mailto:list@c-mauderer.de" target="_blank">list@c-mauderer.de</a>>>>>>>> wrote:<br>
>> > > > > > > ><br>
>> > > > > > > > On 12/08/2019 07:28, Nils Hölscher<br>
>> > wrote:<br>
>> > > > > > > > > Hi,<br>
>> > > > > > > > ><br>
>> > > > > > > > > Can anyone help me with this?<br>
>> > > > > > > > > I need to access the BBB's<br>
>> SD-Card, so<br>
>> > > that I can load<br>
>> > > > > my pru<br>
>> > > > > > > > example on<br>
>> > > > > > > > > the pru.<br>
>> > > > > > > > ><br>
>> > > > > > > > > Thanks,<br>
>> > > > > > > > > Nils<br>
>> > > > > > > > ><br>
>> > > > > > > ><br>
>> > > > > > > > Hello Nils,<br>
>> > > > > > > ><br>
>> > > > > > > > take a look at the following<br>
>> > application:<br>
>> > > > > > > ><br>
>> > > > > > > > <br>
>> > > > > <br>
>> > > > <br>
>> > > <br>
>> > <br>
>> <a href="https://gitlab.com/c-mauderer/rtems-bbb/blob/master/apps/wifi-sample/init.c#L64" rel="noreferrer" target="_blank">https://gitlab.com/c-mauderer/rtems-bbb/blob/master/apps/wifi-sample/init.c#L64</a><br>
>> > > > > > > ><br>
>> > > > > > > > <br>
>> > > > > <br>
>> > > > <br>
>> > > <br>
>> > <br>
>> <a href="https://gitlab.com/c-mauderer/rtems-bbb/blob/master/apps/wifi-sample/libbsdhelper.c#L122" rel="noreferrer" target="_blank">https://gitlab.com/c-mauderer/rtems-bbb/blob/master/apps/wifi-sample/libbsdhelper.c#L122</a><br>
>> > > > > > > ><br>
>> > > > > > > > You should mainly need the stuff<br>
>> > from the<br>
>> > > > > libbsdhelper_init_sd_card()<br>
>> > > > > > > > and libbsdhelper_wait_for_sd().<br>
>> > > > > > > ><br>
>> > > > > > > > Please note that the SD card<br>
>> needs quite<br>
>> > > some time to<br>
>> > > > > initialize on BBB.<br>
>> > > > > > > > I haven't had a look at it why<br>
>> that<br>
>> > is the<br>
>> > > case.<br>
>> > > > > > > ><br>
>> > > > > > > > Best regards<br>
>> > > > > > > ><br>
>> > > > > > > > Christian<br>
>> > > > > > > ><br>
>> > > > > > > ><br>
>> > > > > > > ><br>
>> > _______________________________________________<br>
>> > > > > > > > users mailing list<br>
>> > > > > > > > <a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>><br>
>> > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>>><br>
>> > > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>><br>
>> > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>>>><br>
>> > > > > > > ><br>
>> > <a href="http://lists.rtems.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.rtems.org/mailman/listinfo/users</a><br>
>> > > > > > > ><br>
>> > > > > > ><br>
>> > _______________________________________________<br>
>> > > > > > > users mailing list<br>
>> > > > > > > <a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>><br>
>> > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>>><br>
>> > > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>><br>
>> > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>>>><br>
>> > > > > > ><br>
>> <a href="http://lists.rtems.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.rtems.org/mailman/listinfo/users</a><br>
>> > > > > ><br>
>> > > > ><br>
>> > > > > --<br>
>> > > > > --<br>
>> > > > > --------------------------------------------<br>
>> > > > > embedded brains GmbH<br>
>> > > > > Herr Christian Mauderer<br>
>> > > > > Dornierstr. 4<br>
>> > > > > D-82178 Puchheim<br>
>> > > > > Germany<br>
>> > > > > email:<br>
>> <a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>><br>
>> > > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>>><br>
>> > > > > <br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>><br>
>> > > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>><br>
>> > > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>><br>
>> > <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a><br>
>> <mailto:<a href="mailto:christian.mauderer@embedded-brains.de" target="_blank">christian.mauderer@embedded-brains.de</a>>>>>><br>
>> > > > > Phone: +49-89-18 94 741 - 18<br>
>> > > > > Fax: +49-89-18 94 741 - 08<br>
>> > > > > PGP: Public key available on request.<br>
>> > > > ><br>
>> > > > > Diese Nachricht ist keine geschäftliche<br>
>> Mitteilung<br>
>> > > im Sinne<br>
>> > > > des EHUG.<br>
>> > > > ><br>
>> > > > ><br>
>> > > > > _______________________________________________<br>
>> > > > > users mailing list<br>
>> > > > > <a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>><br>
>> > > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>><br>
>> > <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>><br>
>> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a> <mailto:<a href="mailto:users@rtems.org" target="_blank">users@rtems.org</a>>>>><br>
>> > > > > <a href="http://lists.rtems.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.rtems.org/mailman/listinfo/users</a><br>
>> > > > ><br>
>> > > ><br>
>> > ><br>
>> ><br>
>><br>
> _______________________________________________<br>
> devel mailing list<br>
> <a href="mailto:devel@rtems.org" target="_blank">devel@rtems.org</a><br>
> <a href="http://lists.rtems.org/mailman/listinfo/devel" rel="noreferrer" target="_blank">http://lists.rtems.org/mailman/listinfo/devel</a><br>
> <br>
</blockquote></div>