<div dir="ltr"><div>I have described my changes below, just let me know what you think? I will send</div><div>in the patch once you are happy with it.</div><div dir="ltr">On Thu, Jan 2, 2020 at 10:07 PM Christian Mauderer <<a href="mailto:list@c-mauderer.de">list@c-mauderer.de</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">There is a whitespace error:<br>
<br>
> git am ~/\[PATCH\ v5\]\ Raspberrypi:\ updated\ the\ console\<br>
interface..eml<br>
Applying: Raspberrypi: updated the console interface.<br>
/home/christian/rtems/rtems-bbb/.git/modules/rtems/rebase-apply/patch:732:<br>
trailing whitespace.<br>
* @name Bus to Physical address translation<br>
warning: 1 line adds whitespace errors.<br>
<br>
The patch starts to get a good direction. Most of the points I found are<br>
only small stuff.<br>
<br>
On 01/01/2020 10:14, G S Niteesh wrote:<br>
> Replaced the older console api with newer FDT based<br>
> console driver.<br>
> Replaces the custom pl011 driver with RTEMS arm-pl011<br>
> driver.<br>
> ---<br>
> bsps/arm/raspberrypi/console/console-config.c | 161 +++++++++++++----<br>
> bsps/arm/raspberrypi/console/console_select.c | 114 ------------<br>
> bsps/arm/raspberrypi/console/fbcons.c | 78 ++++----<br>
> bsps/arm/raspberrypi/console/usart.c | 167 ------------------<br>
> bsps/arm/raspberrypi/include/bsp.h | 4 +<br>
> bsps/arm/raspberrypi/include/bsp/fbcons.h | 21 ++-<br>
> .../arm/raspberrypi/include/bsp/raspberrypi.h | 64 +++----<br>
> bsps/arm/raspberrypi/include/bsp/usart.h | 5 +-<br>
> c/src/lib/libbsp/arm/raspberrypi/Makefile.am | 7 +-<br>
> c/src/lib/libbsp/arm/raspberrypi/<a href="http://configure.ac" rel="noreferrer" target="_blank">configure.ac</a> | 13 ++<br>
> 10 files changed, 228 insertions(+), 406 deletions(-)<br>
> delete mode 100644 bsps/arm/raspberrypi/console/console_select.c<br>
> delete mode 100644 bsps/arm/raspberrypi/console/usart.c<br>
> <br>
> diff --git a/bsps/arm/raspberrypi/console/console-config.c b/bsps/arm/raspberrypi/console/console-config.c<br>
> index d2186c918b..c47021e54e 100644<br>
> --- a/bsps/arm/raspberrypi/console/console-config.c<br>
> +++ b/bsps/arm/raspberrypi/console/console-config.c<br>
> @@ -19,50 +19,145 @@<br>
> */<br>
> <br>
> #include <rtems/bspIo.h><br>
> +#include <rtems/console.h><br>
> +#include <rtems/sysinit.h><br>
> <br>
> -#include <libchip/serial.h><br>
> <br>
> -#include <bspopts.h><br>
> -#include <bsp/irq.h><br>
> -#include <bsp/usart.h><br>
> +#include <bsp.h><br>
> #include <bsp/raspberrypi.h><br>
> +#include <bsp/usart.h><br>
> +#include <bsp/arm-pl011.h><br>
> #include <bsp/fbcons.h><br>
> +#include <bsp/console-termios.h><br>
> +#include <bsp/fdt.h><br>
> +#include <bsp/fatal.h><br>
> +<br>
> +#include <bspopts.h><br>
<br>
Why did you move the bspopts.h from top to bottom?<br>
<br>
> <br>
> -console_tbl Console_Configuration_Ports [] = {<br>
> - {<br>
> - .sDeviceName = "/dev/ttyS0",<br>
> - .deviceType = SERIAL_CUSTOM,<br>
> - .pDeviceFns = &bcm2835_usart_fns,<br>
> - .deviceProbe = NULL,<br>
> - .pDeviceFlow = NULL,<br>
> - .ulCtrlPort1 = BCM2835_UART0_BASE,<br>
> - .ulCtrlPort2 = 0,<br>
> - .ulClock = USART0_DEFAULT_BAUD,<br>
> - .ulIntVector = BCM2835_IRQ_ID_UART<br>
> - },<br>
> - {<br>
> - .sDeviceName ="/dev/fbcons",<br>
> - .deviceType = SERIAL_CUSTOM,<br>
> - .pDeviceFns = &fbcons_fns,<br>
> - .deviceProbe = fbcons_probe,<br>
> - .pDeviceFlow = NULL,<br>
> - },<br>
> -};<br>
> -<br>
> -#define PORT_COUNT \<br>
> - (sizeof(Console_Configuration_Ports) \<br>
> - / sizeof(Console_Configuration_Ports [0]))<br>
> -<br>
> -unsigned long Console_Configuration_Count = PORT_COUNT;<br>
> +#include <libfdt.h><br>
> +#include <libchip/serial.h><br>
> +<br>
> +arm_pl011_context pl011_context;<br>
> +<br>
> +rpi_fb_context fb_context;<br>
> +<br>
> +static void output_char_serial(char c)<br>
> +{<br>
> + arm_pl011_write_polled(&pl011_context.base, c);<br>
> +}<br>
> +<br>
> +void output_char_fb(char c)<br>
> +{<br>
> + fbcons_write_polled(&fb_context.base, c);<br>
> +}<br>
> +<br>
> +<br>
> +static void *get_reg_of_node(const void *fdt, int node)<br>
> +{<br>
> + int len;<br>
> + const uint32_t *val;<br>
> +<br>
> + val = fdt_getprop(fdt, node, "reg", &len);<br>
> + if (val == NULL || len < 4) {<br>
> + return NULL;<br>
> + }<br>
> +<br>
> + return (void *) fdt32_to_cpu(val[0]);<br>
> +}<br>
<br>
It would be good to make that function more widely available. Other<br>
drivers will need it too sooner or later. Please follow the convention<br>
used in imx to add the bsp-name as a prefix. So this will be<br>
raspberry_get_reg_of_node or bcm2835_get_reg_of_node (I think both<br>
prefixes are already used in the BSP).<br></blockquote><div>using raspberry_get_reg_of_node, neither of them is being used anywhere. </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> +<br>
> +static void init_ctx_arm_pl011(<br>
> + const void *fdt,<br>
> + int node<br>
> +)<br>
> +{<br>
> + arm_pl011_context *ctx = &pl011_context;<br>
> + rtems_termios_device_context_initialize(&ctx->base, "UART");<br>
> + ctx->regs = BUS_TO_PHY(get_reg_of_node(fdt, node));<br>
<br>
Why do you do the BUS_TO_PHY here and not in the get_reg_of_node()? I<br>
would expect the get_reg_of_node to allways return the usable address<br>
which is the physical address for RTEMS.<br></blockquote><div>I moved the get_reg_of_node definition to bspstart.c, I looked for a logical place,</div><div>couldn't find one, so moved it to bspstart as in imx.</div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> +}<br>
> +<br>
> +static void register_fb( void )<br>
> +{<br>
> + if (fbcons_probe(&fb_context.base) == true) {<br>
> + rtems_termios_device_install(<br>
> + "/dev/fbcons",<br>
> + &fbcons_fns,<br>
> + NULL,<br>
> + &fb_context.base);<br>
> + }<br>
> +}<br>
> +<br>
> +static void console_select( const char *console )<br>
> +{<br>
> + const char *opt;<br>
> +<br>
> + opt = rpi_cmdline_get_arg("--console=");<br>
> +<br>
> + if ( opt ) {<br>
> + if ( strncmp( opt, "fbcons", sizeof( "fbcons" ) - 1 ) == 0 ) {<br>
> + if ( rpi_video_is_initialized() > 0 ) {<br>
> + BSP_output_char = output_char_fb;<br>
> + link("/dev/fbcons", CONSOLE_DEVICE_NAME);<br>
> + return ;<br>
> + }<br>
> + }else{<br>
> + if ( console == NULL ){<br>
> + bsp_fatal( BSP_FATAL_CONSOLE_NO_DEV );<br>
> + }<br>
> + link("/dev/ttyuart0", CONSOLE_DEVICE_NAME);<br>
> + }<br>
> + }<br>
> + BSP_output_char = output_char_serial;<br>
> +}<br>
> +<br>
> +static void uart_probe(void)<br>
> +{<br>
<br>
<br>
Currently uart_probe is reached multiple times:<br>
<br>
1. Via the initial output_char function because it is called in bsp_start().<br>
<br>
2. Via the SYSINIT_ITEM.<br>
<br>
Therefore you should add some logic to prevent a double execution of<br>
this code. I'm not sure whether initializeing the pl011 twice is healthy<br>
(although it seems to work most of the time). </blockquote><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> + const void *fdt;<br>
> + const char *console;<br>
> + int node;<br>
> +<br>
> + fdt = bsp_fdt_get();<br>
> + node = fdt_path_offset(fdt, "/chosen");<br>
> +<br>
> + console = fdt_getprop(fdt, node, "stdout-path", NULL);<br>
> +<br>
> + node = fdt_node_offset_by_compatible(fdt, -1, "brcm,bcm2835-pl011");<br>
> + init_ctx_arm_pl011(fdt, node);<br>
> +<br>
> + console_select(console);<br>
<br>
Is it a good idea to do the console_select here? The frame buffer isn't<br>
necessarily initialized yet but it can get selected. I would move it to<br>
console_initialize().<br></blockquote><div>Then, should I remove the code in bspstart.c that prints information about the board</div><div>model? What if the user excepts output through FB? Or shall we let it to default to the serial</div><div>port, because it might sometimes be useful to make sure whether the program is running or not?</div><div><br></div><div>Shall I move <b>console = fdt_getprop(fdt, node, "stdout-path", NULL)</b> to a new function,</div><div>because console_select requires it to initialize the proper uart-port. But wouldn't that make it</div><div>in-efficient since we are going through the fdt twice, Or shall I return a pointer from uart_probe?</div><div><br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> +}<br>
> <br>
> static void output_char(char c)<br>
> {<br>
> - const console_fns *con =<br>
> - Console_Configuration_Ports [Console_Port_Minor].pDeviceFns;<br>
> + uart_probe();<br>
> + (*BSP_output_char)(c);<br>
> +}<br>
> <br>
> - con->deviceWritePolled((int) Console_Port_Minor, c);<br>
> +rtems_status_code console_initialize(<br>
> + rtems_device_major_number major,<br>
> + rtems_device_minor_number minor,<br>
> + void *arg<br>
> +)<br>
> +{<br>
> + rtems_termios_initialize();<br>
> +<br>
> + uart_probe();<br>
> +<br>
> + rtems_termios_device_install( "/dev/ttyuart0",<br>
<br>
<br>
Seems that my suggestions were not clear. Pleathe either be backward<br>
compatible and use the same name as before ("ttyS0"). Or generate the<br>
name based on the FDT.<br>
<br>
As soon as multiple ports could be supported (Pi4?) generating the name<br>
would be the better solution. But with the still fixed context it isn't<br>
that usefull. So please use the backward compatible name for now so that<br>
this patch can be finalized.<br>
<br>
<br>
> + &arm_pl011_fns,<br>
> + NULL,<br>
> + &pl011_context.base<br>
> + );> + register_fb();<br>
> +<br>
> + return RTEMS_SUCCESSFUL;<br>
> }<br>
> <br>
> BSP_output_char_function_type BSP_output_char = output_char;<br>
> <br>
> BSP_polling_getchar_function_type BSP_poll_char = NULL;<br>
> +<br>
> +RTEMS_SYSINIT_ITEM(<br>
> + uart_probe,<br>
> + RTEMS_SYSINIT_BSP_START,<br>
> + RTEMS_SYSINIT_ORDER_LAST<br>
> +);<br>
> \ No newline at end of file<br>
> diff --git a/bsps/arm/raspberrypi/console/console_select.c b/bsps/arm/raspberrypi/console/console_select.c<br>
> deleted file mode 100644<br>
> index bd246ca868..0000000000<br>
> --- a/bsps/arm/raspberrypi/console/console_select.c<br>
> +++ /dev/null<br>
> @@ -1,114 +0,0 @@<br>
> -/**<br>
> - * @file<br>
> - *<br>
> - * @ingroup raspberrypi_console<br>
> - *<br>
> - * @brief console select<br>
> - */<br>
> -<br>
> -/*<br>
> - * Copyright (c) 2015 Yang Qiao<br>
> - *<br>
> - * The license and distribution terms for this file may be<br>
> - * found in the file LICENSE in this distribution or at<br>
> - *<br>
> - * <a href="http://www.rtems.org/license/LICENSE" rel="noreferrer" target="_blank">http://www.rtems.org/license/LICENSE</a><br>
> - *<br>
> - */<br>
> -<br>
> -#include <bsp.h><br>
> -#include <bsp/fatal.h><br>
> -#include <rtems/libio.h><br>
> -#include <stdlib.h><br>
> -#include <string.h><br>
> -#include <assert.h><br>
> -#include <termios.h><br>
> -<br>
> -#include <rtems/termiostypes.h><br>
> -#include <libchip/serial.h><br>
> -#include "../../shared/dev/serial/legacy-console.h"<br>
> -#include <bsp/rpi-fb.h><br>
> -<br>
> -rtems_device_minor_number BSPPrintkPort = 0;<br>
> -<br>
> -/*<br>
> - * Method to return true if the device associated with the<br>
> - * minor number probs available.<br>
> - */<br>
> -static bool bsp_Is_Available( rtems_device_minor_number minor )<br>
> -{<br>
> - console_tbl *cptr = Console_Port_Tbl[ minor ];<br>
> -<br>
> - /*<br>
> - * First perform the configuration dependent probe, then the<br>
> - * device dependent probe<br>
> - */<br>
> - if ( ( !cptr->deviceProbe || cptr->deviceProbe( minor ) ) &&<br>
> - cptr->pDeviceFns->deviceProbe( minor ) ) {<br>
> - return true;<br>
> - }<br>
> -<br>
> - return false;<br>
> -}<br>
> -<br>
> -/*<br>
> - * Method to return the first available device.<br>
> - */<br>
> -static rtems_device_minor_number bsp_First_Available_Device( void )<br>
> -{<br>
> - rtems_device_minor_number minor;<br>
> -<br>
> - for ( minor = 0; minor < Console_Port_Count; minor++ ) {<br>
> - console_tbl *cptr = Console_Port_Tbl[ minor ];<br>
> -<br>
> - /*<br>
> - * First perform the configuration dependent probe, then the<br>
> - * device dependent probe<br>
> - */<br>
> -<br>
> - if ( ( !cptr->deviceProbe || cptr->deviceProbe( minor ) ) &&<br>
> - cptr->pDeviceFns->deviceProbe( minor ) ) {<br>
> - return minor;<br>
> - }<br>
> - }<br>
> -<br>
> - /*<br>
> - * Error No devices were found. We will want to bail here.<br>
> - */<br>
> - bsp_fatal( BSP_FATAL_CONSOLE_NO_DEV );<br>
> -}<br>
> -<br>
> -void bsp_console_select( void )<br>
> -{<br>
> - /*<br>
> - * Reset Console_Port_Minor and<br>
> - * BSPPrintkPort here if desired.<br>
> - *<br>
> - * This default version allows the bsp to set these<br>
> - * values at creation and will not touch them again<br>
> - * unless the selected port number is not available.<br>
> - */<br>
> - const char *opt;<br>
> -<br>
> - Console_Port_Minor = BSP_CONSOLE_UART0;<br>
> - BSPPrintkPort = BSP_CONSOLE_UART0;<br>
> -<br>
> - opt = rpi_cmdline_get_arg( "--console=" );<br>
> -<br>
> - if ( opt ) {<br>
> - if ( strncmp( opt, "fbcons", sizeof( "fbcons" ) - 1 ) == 0 ) {<br>
> - if ( rpi_video_is_initialized() > 0 ) {<br>
> - Console_Port_Minor = BSP_CONSOLE_FB;<br>
> - BSPPrintkPort = BSP_CONSOLE_FB;<br>
> - }<br>
> - }<br>
> - }<br>
> -<br>
> - /*<br>
> - * If the device that was selected isn't available then<br>
> - * let the user know and select the first available device.<br>
> - */<br>
> - if ( !bsp_Is_Available( Console_Port_Minor ) ) {<br>
> - Console_Port_Minor = bsp_First_Available_Device();<br>
> - }<br>
> -}<br>
> diff --git a/bsps/arm/raspberrypi/console/fbcons.c b/bsps/arm/raspberrypi/console/fbcons.c<br>
> index 3669ba458d..0e6a430c54 100644<br>
> --- a/bsps/arm/raspberrypi/console/fbcons.c<br>
> +++ b/bsps/arm/raspberrypi/console/fbcons.c<br>
> @@ -18,6 +18,7 @@<br>
> <br>
> #include <rtems.h><br>
> #include <rtems/libio.h><br>
> +#include <rtems/termiostypes.h><br>
> <br>
> #include <stdlib.h><br>
> <br>
> @@ -29,15 +30,6 @@<br>
> #include <bsp/vc.h><br>
> #include <bsp/rpi-fb.h><br>
> <br>
> -/*<br>
> - * fbcons_init<br>
> - *<br>
> - * This function initializes the fb console to a quiecsent state.<br>
> - */<br>
> -static void fbcons_init( int minor )<br>
> -{<br>
> -}<br>
> -<br>
> /*<br>
> * fbcons_open<br>
> *<br>
> @@ -45,13 +37,14 @@ static void fbcons_init( int minor )<br>
> *<br>
> * Default state is 9600 baud, 8 bits, No parity, and 1 stop bit.<br>
> */<br>
> -static int fbcons_open(<br>
> - int major,<br>
> - int minor,<br>
> - void *arg<br>
> +static bool fbcons_open(<br>
> + struct rtems_termios_tty *tty,<br>
> + rtems_termios_device_context *base,<br>
> + struct termios *term,<br>
> + rtems_libio_open_close_args_t *args<br>
> )<br>
> {<br>
> - return RTEMS_SUCCESSFUL;<br>
> + return true;<br>
> }<br>
> <br>
> /*<br>
> @@ -59,13 +52,12 @@ static int fbcons_open(<br>
> *<br>
> * This function shuts down the requested port.<br>
> */<br>
> -static int fbcons_close(<br>
> - int major,<br>
> - int minor,<br>
> - void *arg<br>
> +static void fbcons_close(<br>
> + struct rtems_termios_tty *tty,<br>
> + rtems_termios_device_context *base,<br>
> + rtems_libio_open_close_args_t *args<br>
> )<br>
> {<br>
> - return ( RTEMS_SUCCESSFUL );<br>
> }<br>
> <br>
> /*<br>
> @@ -73,8 +65,8 @@ static int fbcons_close(<br>
> *<br>
> * This routine polls out the requested character.<br>
> */<br>
> -static void fbcons_write_polled(<br>
> - int minor,<br>
> +void fbcons_write_polled(<br>
> + rtems_termios_device_context *base,<br>
> char c<br>
> )<br>
> {<br>
> @@ -90,8 +82,8 @@ static void fbcons_write_polled(<br>
> * Console Termios output entry point when using polled output.<br>
> *<br>
> */<br>
> -static ssize_t fbcons_write_support_polled(<br>
> - int minor,<br>
> +static void fbcons_write_support_polled(<br>
> + rtems_termios_device_context *base,<br>
> const char *buf,<br>
> size_t len<br>
> )<br>
> @@ -102,14 +94,9 @@ static ssize_t fbcons_write_support_polled(<br>
> * poll each byte in the string out of the port.<br>
> */<br>
> while ( nwrite < len ) {<br>
> - fbcons_write_polled( minor, *buf++ );<br>
> + fbcons_write_polled( base, *buf++ );<br>
> nwrite++;<br>
> }<br>
> -<br>
> - /*<br>
> - * return the number of bytes written.<br>
> - */<br>
> - return nwrite;<br>
> }<br>
> <br>
> /*<br>
> @@ -117,7 +104,9 @@ static ssize_t fbcons_write_support_polled(<br>
> *<br>
> * Console Termios polling input entry point.<br>
> */<br>
> -static int fbcons_inbyte_nonblocking_polled( int minor )<br>
> +int fbcons_inbyte_nonblocking_polled(<br>
> + rtems_termios_device_context *base<br>
> +)<br>
> {<br>
> // if( rtems_kbpoll() ) {<br>
> // int c = getch();<br>
> @@ -133,15 +122,17 @@ static int fbcons_inbyte_nonblocking_polled( int minor )<br>
> * This function sets the UART channel to reflect the requested termios<br>
> * port settings.<br>
> */<br>
> -static int fbcons_set_attributes(<br>
> - int minor,<br>
> +static bool fbcons_set_attributes(<br>
> + rtems_termios_device_context *base,<br>
> const struct termios *t<br>
> )<br>
> {<br>
> - return 0;<br>
> + return true;<br>
> }<br>
> <br>
> -bool fbcons_probe( int minor )<br>
> +bool fbcons_probe(<br>
> + rtems_termios_device_context *context<br>
> +)<br>
> {<br>
> // rtems_status_code status;<br>
> static bool firstTime = true;<br>
> @@ -163,15 +154,12 @@ bool fbcons_probe( int minor )<br>
> return ret;<br>
> }<br>
> <br>
> -const console_fns fbcons_fns =<br>
> +const rtems_termios_device_handler fbcons_fns =<br>
> {<br>
> - .deviceProbe = libchip_serial_default_probe, /* deviceProbe */<br>
> - .deviceFirstOpen = fbcons_open, /* deviceFirstOpen */<br>
> - .deviceLastClose = fbcons_close, /* deviceLastClose */<br>
> - .deviceRead = fbcons_inbyte_nonblocking_polled, /* deviceRead */<br>
> - .deviceWrite = fbcons_write_support_polled, /* deviceWrite */<br>
> - .deviceInitialize = fbcons_init, /* deviceInitialize */<br>
> - .deviceWritePolled = fbcons_write_polled, /* deviceWritePolled */<br>
> - .deviceSetAttributes = fbcons_set_attributes, /* deviceSetAttributes */<br>
> - .deviceOutputUsesInterrupts = FALSE, /* deviceOutputUsesInterrupts*/<br>
> -};<br>
> + .first_open = fbcons_open,<br>
> + .last_close = fbcons_close,<br>
> + .poll_read = fbcons_inbyte_nonblocking_polled,<br>
> + .write = fbcons_write_support_polled,<br>
> + .set_attributes = fbcons_set_attributes,<br>
> + .mode = TERMIOS_POLLED<br>
> +};<br>
> \ No newline at end of file<br>
> diff --git a/bsps/arm/raspberrypi/console/usart.c b/bsps/arm/raspberrypi/console/usart.c<br>
> deleted file mode 100644<br>
> index 25fb523621..0000000000<br>
> --- a/bsps/arm/raspberrypi/console/usart.c<br>
> +++ /dev/null<br>
> @@ -1,167 +0,0 @@<br>
> -/**<br>
> - * @file<br>
> - *<br>
> - * @ingroup raspberrypi_usart<br>
> - *<br>
> - * @brief USART support.<br>
> - */<br>
> -<br>
> -/*<br>
> - * Copyright (c) 2013 Alan Cudmore<br>
> - *<br>
> - * The license and distribution terms for this file may be<br>
> - * found in the file LICENSE in this distribution or at<br>
> - *<br>
> - * <a href="http://www.rtems.org/license/LICENSE" rel="noreferrer" target="_blank">http://www.rtems.org/license/LICENSE</a><br>
> - *<br>
> - */<br>
> -<br>
> -#include <libchip/sersupp.h><br>
> -<br>
> -#include <bsp.h><br>
> -#include <bsp/irq.h><br>
> -#include <bsp/usart.h><br>
> -#include <bsp/raspberrypi.h><br>
> -#include <rtems/bspIo.h><br>
> -<br>
> -static void usart_delay(uint32_t n)<br>
> -{<br>
> - volatile uint32_t i = 0;<br>
> -<br>
> - for(i = 0; i < n; i++)<br>
> - ;<br>
> -}<br>
> -<br>
> -#if 0<br>
> -/*<br>
> - * These will be useful when the driver supports interrupt driven IO.<br>
> - */<br>
> -static rtems_vector_number usart_get_irq_number(const console_tbl *ct)<br>
> -{<br>
> - return ct->ulIntVector;<br>
> -}<br>
> -<br>
> -static uint32_t usart_get_baud(const console_tbl *ct)<br>
> -{<br>
> - return ct->ulClock;<br>
> -}<br>
> -#endif<br>
> -<br>
> -static void usart_set_baud(int minor, int baud)<br>
> -{<br>
> - /*<br>
> - * Nothing for now<br>
> - */<br>
> - return;<br>
> -}<br>
> -<br>
> -static void usart_initialize(int minor)<br>
> -{<br>
> - unsigned int gpio_reg;<br>
> -<br>
> - /*<br>
> - ** Program GPIO pins for UART 0<br>
> - */<br>
> - gpio_reg = BCM2835_REG(BCM2835_GPIO_GPFSEL1);<br>
> - gpio_reg &= ~(7<<12); /* gpio14 */<br>
> - gpio_reg |= (4<<12); /* alt0 */<br>
> - gpio_reg &= ~(7<<15); /* gpio15 */<br>
> - gpio_reg |= (4<<15); /* alt0 */<br>
> - BCM2835_REG(BCM2835_GPIO_GPFSEL1) = gpio_reg;<br>
> -<br>
> - BCM2835_REG(BCM2835_GPIO_GPPUD) = 0;<br>
> - usart_delay(150);<br>
> - BCM2835_REG(BCM2835_GPIO_GPPUDCLK0) = (1<<14)|(1<<15);<br>
> - usart_delay(150);<br>
> - BCM2835_REG(BCM2835_GPIO_GPPUDCLK0) = 0;<br>
> -<br>
> - /*<br>
> - ** Init the PL011 UART<br>
> - */<br>
> - BCM2835_REG(BCM2835_UART0_CR) = 0;<br>
> - BCM2835_REG(BCM2835_UART0_ICR) = 0x7FF;<br>
> - BCM2835_REG(BCM2835_UART0_IMSC) = 0;<br>
> - BCM2835_REG(BCM2835_UART0_IBRD) = 1;<br>
> - BCM2835_REG(BCM2835_UART0_FBRD) = 40;<br>
> - BCM2835_REG(BCM2835_UART0_LCRH) = 0x70;<br>
> - BCM2835_REG(BCM2835_UART0_RSRECR) = 0;<br>
> -<br>
> - BCM2835_REG(BCM2835_UART0_CR) = 0x301;<br>
> -<br>
> - BCM2835_REG(BCM2835_UART0_IMSC) = BCM2835_UART0_IMSC_RX;<br>
> -<br>
> - usart_set_baud(minor, 115000);<br>
> -}<br>
> -<br>
> -static int usart_first_open(int major, int minor, void *arg)<br>
> -{<br>
> - rtems_libio_open_close_args_t *oc = (rtems_libio_open_close_args_t *) arg;<br>
> - struct rtems_termios_tty *tty = (struct rtems_termios_tty *) oc->iop->data1;<br>
> - const console_tbl *ct = Console_Port_Tbl [minor];<br>
> - console_data *cd = &Console_Port_Data [minor];<br>
> -<br>
> - cd->termios_data = tty;<br>
> - rtems_termios_set_initial_baud(tty, ct->ulClock);<br>
> -<br>
> - return 0;<br>
> -}<br>
> -<br>
> -static int usart_last_close(int major, int minor, void *arg)<br>
> -{<br>
> - return 0;<br>
> -}<br>
> -<br>
> -static int usart_read_polled(int minor)<br>
> -{<br>
> - if (minor == 0) {<br>
> - if (((BCM2835_REG(BCM2835_UART0_FR)) & BCM2835_UART0_FR_RXFE) == 0) {<br>
> - return((BCM2835_REG(BCM2835_UART0_DR)) & 0xFF );<br>
> - } else {<br>
> - return -1;<br>
> - }<br>
> - } else {<br>
> - printk("Unknown console minor number: %d\n", minor);<br>
> - return -1;<br>
> - }<br>
> -}<br>
> -<br>
> -static void usart_write_polled(int minor, char c)<br>
> -{<br>
> - while (1) {<br>
> - if ((BCM2835_REG(BCM2835_UART0_FR) & BCM2835_UART0_FR_TXFF) == 0)<br>
> - break;<br>
> - }<br>
> - BCM2835_REG(BCM2835_UART0_DR) = c;<br>
> -}<br>
> -<br>
> -static ssize_t usart_write_support_polled(<br>
> - int minor,<br>
> - const char *s,<br>
> - size_t n<br>
> -)<br>
> -{<br>
> - ssize_t i = 0;<br>
> -<br>
> - for (i = 0; i < n; ++i) {<br>
> - usart_write_polled(minor, s [i]);<br>
> - }<br>
> -<br>
> - return n;<br>
> -}<br>
> -<br>
> -static int usart_set_attributes(int minor, const struct termios *term)<br>
> -{<br>
> - return -1;<br>
> -}<br>
> -<br>
> -const console_fns bcm2835_usart_fns = {<br>
> - .deviceProbe = libchip_serial_default_probe,<br>
> - .deviceFirstOpen = usart_first_open,<br>
> - .deviceLastClose = usart_last_close,<br>
> - .deviceRead = usart_read_polled,<br>
> - .deviceWrite = usart_write_support_polled,<br>
> - .deviceInitialize = usart_initialize,<br>
> - .deviceWritePolled = usart_write_polled,<br>
> - .deviceSetAttributes = usart_set_attributes,<br>
> - .deviceOutputUsesInterrupts = false<br>
> -};<br>
> diff --git a/bsps/arm/raspberrypi/include/bsp.h b/bsps/arm/raspberrypi/include/bsp.h<br>
> index 1075cb1771..b81d19cd76 100644<br>
> --- a/bsps/arm/raspberrypi/include/bsp.h<br>
> +++ b/bsps/arm/raspberrypi/include/bsp.h<br>
> @@ -41,6 +41,10 @@ extern "C" {<br>
> <br>
> #define BSP_FEATURE_IRQ_EXTENSION<br>
> <br>
> +#if BSP_START_COPY_FDT_FROM_U_BOOT<br>
> +#define BSP_FDT_IS_SUPPORTED<br>
> +#endif<br>
> +<br>
> #define RPI_L2_CACHE_ENABLE 1<br>
> <br>
> #define BSP_GPIO_PIN_COUNT 32<br>
> diff --git a/bsps/arm/raspberrypi/include/bsp/fbcons.h b/bsps/arm/raspberrypi/include/bsp/fbcons.h<br>
> index d0e126699a..9bdb4b115e 100644<br>
> --- a/bsps/arm/raspberrypi/include/bsp/fbcons.h<br>
> +++ b/bsps/arm/raspberrypi/include/bsp/fbcons.h<br>
> @@ -33,12 +33,29 @@ extern "C" {<br>
> <br>
> #define FB_CONSOLE 0x50492835<br>
> <br>
> -bool fbcons_probe( int minor );<br>
> +bool fbcons_probe(<br>
> + rtems_termios_device_context *base<br>
> + );<br>
> +<br>
> +void fbcons_write_polled(<br>
> + rtems_termios_device_context *base,<br>
> + char c<br>
> +);<br>
> +<br>
> +int fbcons_inbyte_nonblocking_polled(<br>
> + rtems_termios_device_context *base<br>
> +);<br>
<br>
Why did add this function to the header? It isn't used outside of<br>
fbcons.c, is it? So it should be possible to make it static.<br></blockquote><div>I don't remember exactly why, but maybe to support the previous api. REmoved</div><div>the prototype from the header and made the function static.</div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> +<br>
> +void output_char_fb(char c);<br>
> +<br>
> +typedef struct {<br>
> + rtems_termios_device_context base;<br>
> +} rpi_fb_context ;<br>
> <br>
> /*<br>
> * Driver function table<br>
> */<br>
> -extern const console_fns fbcons_fns;<br>
> +extern const rtems_termios_device_handler fbcons_fns;<br>
> <br>
> #ifdef __cplusplus<br>
> }<br>
> diff --git a/bsps/arm/raspberrypi/include/bsp/raspberrypi.h b/bsps/arm/raspberrypi/include/bsp/raspberrypi.h<br>
> index 40c80cf408..68888041e2 100644<br>
> --- a/bsps/arm/raspberrypi/include/bsp/raspberrypi.h<br>
> +++ b/bsps/arm/raspberrypi/include/bsp/raspberrypi.h<br>
> @@ -24,6 +24,7 @@<br>
> #include <bspopts.h><br>
> #include <stdint.h><br>
> #include <bsp/utility.h><br>
> +#include <rtems/termiostypes.h><br>
> <br>
> /**<br>
> * @defgroup raspberrypi_reg Register Definitions<br>
> @@ -53,13 +54,36 @@<br>
> */<br>
> <br>
> #if (BSP_IS_RPI2 == 1)<br>
> - #define RPI_PERIPHERAL_BASE 0x3F000000<br>
> + #define RPI_PERIPHERAL_BASE 0x3F000000<br>
> + #define BASE_OFFSET 0X3F000000<br>
> #else<br>
> - #define RPI_PERIPHERAL_BASE 0x20000000<br>
> + #define RPI_PERIPHERAL_BASE 0x20000000<br>
> + #define BASE_OFFSET 0X5E000000<br>
> #endif<br>
> <br>
> #define RPI_PERIPHERAL_SIZE 0x01000000<br>
> <br>
> +/**<br>
> + * @name Bus to Physical address translation <br>
> + * Macro.<br>
> + * @{<br>
> + */<br>
> +<br>
> +#define BUS_TO_PHY(x) (x - BASE_OFFSET)<br>
<br>
Please change that to<br>
<br>
#define BUS_TO_PHY(x) ((x) - BASE_OFFSET)<br>
<br>
Note the brackets around x. Otherwise what happens if I call it with<br>
<br>
BUS_TO_PHY(some_address & ~0xF)<br>
<br>
Answer: The operator & (as bitwise and) has a later precedence than<br>
subtraction. So you would end up with basically the following line:<br>
<br>
some_address & (~0xF - BASE_OFFSET)<br>
<br>
which is not what you want. That's a general rule for macros: If you use<br>
a parameter allways put brackets arround it. It prevents lots of odd bugs.<br>
<br>
> +<br>
> +/** @} */<br>
> +<br>
> +/**<br>
> + * @name Console select definitions<br>
> + *<br>
> + * @{<br>
> + */<br>
> +<br>
> +#define PL011 0<br>
> +#define FB 1<br>
<br>
I think these two are never used? Besides that: The names are a bit<br>
short for widely visible defines (especially "FB"). In such a case a<br>
namespace prefix would be good.<br></blockquote><div>These two are not actually used anywhere, they were created to aid console_select</div><div>function previously, but are no longer used, so I removed them. </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> +<br>
> +/** @} */<br>
> +<br>
> /**<br>
> * @name Internal ARM Timer Registers<br>
> *<br>
> @@ -184,42 +208,6 @@<br>
> <br>
> /** @} */<br>
> <br>
> -/**<br>
> - * @name UART 0 (PL011) Registers<br>
> - *<br>
> - * @{<br>
> - */<br>
> -<br>
> -#define BCM2835_UART0_BASE (RPI_PERIPHERAL_BASE + 0x201000)<br>
> -<br>
> -#define BCM2835_UART0_DR (BCM2835_UART0_BASE + 0x00)<br>
> -#define BCM2835_UART0_RSRECR (BCM2835_UART0_BASE + 0x04)<br>
> -#define BCM2835_UART0_FR (BCM2835_UART0_BASE + 0x18)<br>
> -#define BCM2835_UART0_ILPR (BCM2835_UART0_BASE + 0x20)<br>
> -#define BCM2835_UART0_IBRD (BCM2835_UART0_BASE + 0x24)<br>
> -#define BCM2835_UART0_FBRD (BCM2835_UART0_BASE + 0x28)<br>
> -#define BCM2835_UART0_LCRH (BCM2835_UART0_BASE + 0x2C)<br>
> -#define BCM2835_UART0_CR (BCM2835_UART0_BASE + 0x30)<br>
> -#define BCM2835_UART0_IFLS (BCM2835_UART0_BASE + 0x34)<br>
> -#define BCM2835_UART0_IMSC (BCM2835_UART0_BASE + 0x38)<br>
> -#define BCM2835_UART0_RIS (BCM2835_UART0_BASE + 0x3C)<br>
> -#define BCM2835_UART0_MIS (BCM2835_UART0_BASE + 0x40)<br>
> -#define BCM2835_UART0_ICR (BCM2835_UART0_BASE + 0x44)<br>
> -#define BCM2835_UART0_DMACR (BCM2835_UART0_BASE + 0x48)<br>
> -#define BCM2835_UART0_ITCR (BCM2835_UART0_BASE + 0x80)<br>
> -#define BCM2835_UART0_ITIP (BCM2835_UART0_BASE + 0x84)<br>
> -#define BCM2835_UART0_ITOP (BCM2835_UART0_BASE + 0x88)<br>
> -#define BCM2835_UART0_TDR (BCM2835_UART0_BASE + 0x8C)<br>
> -<br>
> -#define BCM2835_UART0_MIS_RX 0x10<br>
> -#define BCM2835_UART0_MIS_TX 0x20<br>
> -#define BCM2835_UART0_IMSC_RX 0x10<br>
> -#define BCM2835_UART0_IMSC_TX 0x20<br>
> -#define BCM2835_UART0_FR_RXFE 0x10<br>
> -#define BCM2835_UART0_FR_TXFF 0x20<br>
> -#define BCM2835_UART0_ICR_RX 0x10<br>
> -#define BCM2835_UART0_ICR_TX 0x20<br>
> -<br>
> /** @} */<br>
> <br>
> /**<br>
> diff --git a/bsps/arm/raspberrypi/include/bsp/usart.h b/bsps/arm/raspberrypi/include/bsp/usart.h<br>
> index d3e710c5e9..abbf53626c 100644<br>
> --- a/bsps/arm/raspberrypi/include/bsp/usart.h<br>
> +++ b/bsps/arm/raspberrypi/include/bsp/usart.h<br>
> @@ -32,9 +32,8 @@<br>
> extern "C" {<br>
> #endif /* __cplusplus */<br>
> <br>
> -#define USART0_DEFAULT_BAUD 115000<br>
> -<br>
> -extern const console_fns bcm2835_usart_fns;<br>
> +#define PL011_DEFAULT_BAUD 115000<br>
> +#define BCM2835_PL011_BASE (RPI_PERIPHERAL_BASE + 0x201000)<br>
> <br>
> #ifdef __cplusplus<br>
> }<br>
> diff --git a/c/src/lib/libbsp/arm/raspberrypi/Makefile.am b/c/src/lib/libbsp/arm/raspberrypi/Makefile.am<br>
> index 11a22f89e3..70b19178b4 100644<br>
> --- a/c/src/lib/libbsp/arm/raspberrypi/Makefile.am<br>
> +++ b/c/src/lib/libbsp/arm/raspberrypi/Makefile.am<br>
> @@ -42,6 +42,7 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/bspfatal-default.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/cpucounter/cpucounterfrequency.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/cpucounter/cpucounterread.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/sbrk.c<br>
> +librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/bsp-fdt.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/stackalloc.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/shared/start/bsp-start-memcpy.S<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/shared/cp15/arm-cp15-set-ttb-entries.c<br>
> @@ -63,14 +64,12 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/shared/cp15/arm-cp15-set-exc<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/irq/irq.c<br>
> <br>
> # Console<br>
> -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/legacy-console.c<br>
> -librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/legacy-console-control.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/console/console-config.c<br>
> -librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/console/console_select.c<br>
> -librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/console/usart.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/console/fb.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/console/fbcons.c<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/console/outch.c<br>
> +librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/console-termios.c<br>
> +librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/shared/serial/arm-pl011.c<br>
> <br>
> # Mailbox<br>
> librtemsbsp_a_SOURCES += ../../../../../../bsps/arm/raspberrypi/start/mailbox.c<br>
> diff --git a/c/src/lib/libbsp/arm/raspberrypi/<a href="http://configure.ac" rel="noreferrer" target="_blank">configure.ac</a> b/c/src/lib/libbsp/arm/raspberrypi/<a href="http://configure.ac" rel="noreferrer" target="_blank">configure.ac</a><br>
> index 452aa4d029..b1aa0bf417 100644<br>
> --- a/c/src/lib/libbsp/arm/raspberrypi/<a href="http://configure.ac" rel="noreferrer" target="_blank">configure.ac</a><br>
> +++ b/c/src/lib/libbsp/arm/raspberrypi/<a href="http://configure.ac" rel="noreferrer" target="_blank">configure.ac</a><br>
> @@ -15,6 +15,19 @@ RTEMS_CANONICAL_TARGET_CPU<br>
> AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])<br>
> RTEMS_BSP_CONFIGURE<br>
> <br>
> +RTEMS_BSPOPTS_SET([BSP_START_COPY_FDT_FROM_U_BOOT],[*],[1])<br>
> +RTEMS_BSPOPTS_HELP([BSP_START_COPY_FDT_FROM_U_BOOT],[copy the U-Boot provided FDT to an internal storage])<br>
> +<br>
> +RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[*],[262144])<br>
> +RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_SIZE_MAX],[maximum size of the FDT blob in bytes])<br>
> +<br>
> +RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[*],[1])<br>
> +RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_READ_ONLY],[place the FDT blob into the read-only data area])<br>
> +<br>
> +RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_COPY_TO_READ_ONLY_LOAD_AREA],[*],[1])<br>
> +RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_COPY_TO_READ_ONLY_LOAD_AREA],[copy the FDT blob into the read-only load area via bsp_fdt_copy()])<br>
> +<br>
> +<br>
<br>
Please put these changes in an extra patch (something like<br>
"bsp/raspberry: Enable FDT support.". It's an important change (you now<br>
need an fdt) so it should be clearly visible in the history.<br>
<br>
> RTEMS_BSPOPTS_SET([BSP_START_RESET_VECTOR],[*],[])<br>
> RTEMS_BSPOPTS_HELP([BSP_START_RESET_VECTOR],[reset vector address for BSP start])<br>
> <br>
> <br>
</blockquote></div></div>