<div dir="ltr">Hello,<div>I was just testing the bsp package using beagleboard and I ran into an error when trying to build the bsp. I received the error <br></div><div>checking for arm-rtems5-gcc... no<br>configure: error: no acceptable cc found in $PATH<br>Makefile:740: recipe for target 'beagleboardxm' failed<br>make[2]: *** [beagleboardxm] Error 1<br>make[2]: Leaving directory '/home/kingkong/Coding-Projects/build/beagle-black/arm-rtems5/c'<br>Makefile:289: recipe for target 'all-recursive' failed<br>make[1]: *** [all-recursive] Error 1<br>make[1]: Leaving directory '/home/kingkong/Coding-Projects/build/beagle-black/arm-rtems5/c'</div><div>For more extensive details see the screenshot below. I tried re-bootstraping and following the guide for the hello-world example, but I still received the same error message. I was using the guide listed on the ideas page ("<a href="http://www.shrike-systems.com/beagleboard-xm-beaglebone-black-and-everything-else-rtems-on-the-beagles.html">http://www.shrike-systems.com/beagleboard-xm-beaglebone-black-and-everything-else-rtems-on-the-beagles.html</a>")</div><div>The current path I used was /home/kingkong/Coding-Projects/rtems/5/bin:$PATH.</div><div>Thank you for your help<br></div><div><br></div></div>