<html><head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body>
<p>That exception dump doesn't say a lot other than the ELR pointing
at the very first instruction in your image, so I suspect that
u-boot is trying to start your image as AArch64 code instead of
AArch32/ARMv7 code. The ESR just specifies that it was a 32-bit
instruction that blew up (both AArch32 and AArch64 use 32-bit
instructions) instead of a 16-bit instruction.</p>
<p>The u-boot images that come with the PetaLinux distributions
default to starting code as AArch64 at EL2, so you either need to
figure out how to make u-boot default to AArch32/ARMv7 at EL1 or
build a new u-boot that can do what you need and then package it
into BOOT.bin using bootgen (the code is available on github).
From what I remember, the ARMv7 BSP for ZynqMP mentions booting
over JTAG.<br>
</p>
<p><br>
</p>
<p>Kinsey<br>
</p>
<div class="moz-cite-prefix">On 4/14/2021 13:18, Richi Dubey wrote:<br>
</div>
<blockquote type="cite" cite="mid:CAAQOZwwO6GvW8G3wy+emNngG2uDem2v_YJ-oP48C0wiL9LSPNw@mail.gmail.com">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">Hi Jan, Kinsey,
<div><br>
</div>
<div>Thanks for your quick responses.</div>
<div><br>
</div>
<div>I rebuilt the .img file with -O rtems option, and I
think it is the standard uboot available from PetaLinux.
It still fails, but I think it is related to RTEMS now: </div>
<div>--------------------------------------------<br>
</div>
<div>Welcome to minicom 2.7.1<br>
<br>
OPTIONS: I18n <br>
Compiled on May 6 2018, 08:02:47.Welcome to minicom 2.7.1<br>
<br>
OPTIONS: I18n <br>
Compiled on May 6 2018, 08:02:47.<br>
Port /dev/ttyUSB32, 18:14:14<br>
<br>
Press CTRL-K Z for help on special keys<br>
<br>
Xilinx Zynq MP First Stage Boot Loader <br>
Release 2020.1 Jan 1 2021 - 07:33:16<br>
NOTICE: ATF running on XCZU7EV/silicon v4/RTL5.1 at
0xfffea000<br>
NOTICE: BL31: Secure code at 0x60000000<br>
NOTICE: BL31: Non secure code at 0x10080000<br>
NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9<br>
NOTICE: BL31: Built : 08:36:10, Sep 1 2020<br>
PMUFW: v1.1<br>
<br>
<br>
U-Boot 2019.01 (Sep 01 2020 - 08:36:54 +0000)<br>
<br>
Model: ZynqMP ZCU106 RevA<br>
Board: Xilinx ZynqMP<br>
DRAM: 4 GiB
<br>
EL Level: EL2
<br>
Chip ID: zu7ev
<br>
MMC: mmc@ff170000: 0
<br>
Loading Environment from SPI Flash... SF: Detected
n25q512a with page size 512 B<br>
ytes, erase size 128 KiB, total 128 MiB
<br>
OK
<br>
In: serial@ff000000
<br>
Out: serial@ff000000
<br>
Err: serial@ff000000
<br>
Model: ZynqMP ZCU106 RevA
<br>
Board: Xilinx ZynqMP
<br>
Net: ZYNQ GEM: ff0e0000, phyaddr c, interface rgmii-id
<br>
<br>
Warning: ethernet@ff0e0000 MAC addresses don't match:
<br>
Address in ROM is 00:0a:35:05:2f:ec
<br>
Address in environment is 00:0a:35:00:22:19
<br>
eth0: ethernet@ff0e0000
<br>
Hit any key to stop autoboot: 0
<br>
ZynqMP> tftpboot 0x3000000 rdubey/sp01new.img
<br>
Using ethernet@ff0e0000 device
<br>
TFTP from server 172.19.0.3; our IP address is 172.19.2.40
<br>
Filename 'rdubey/sp01new.img'.
<br>
Load address: 0x3000000
<br>
Loading: ####
<br>
1.7 MiB/s
<br>
done
<br>
Bytes transferred = 50978 (c722 hex)
<br>
ZynqMP> bootm 0x3000000 ; reset
<br>
## Booting kernel from Legacy Image at 03000000 ...
<br>
Image Name: RTEMS
<br>
Image Type: ARM RTEMS Kernel Image (gzip compressed)
<br>
Data Size: 50914 Bytes = 49.7 KiB
<br>
Load Address: 00300000
<br>
Entry Point: 00300000
<br>
Verifying Checksum ... OK
<br>
Uncompressing Kernel Image ... OK
<br>
## Transferring control to RTEMS (at address 00300000) ...
<br>
"Synchronous Abort" handler, esr 0x02000000
<br>
elr: ffffffff90593000 lr : 0000000010097a90 (reloc)
<br>
elr: 0000000000300000 lr : 000000007fe04a90
<br>
x0 : 000000007ddacf58 x1 : 0000000000000000
<br>
x2 : 0000000000006802 x3 : 0000000000000020
<br>
x4 : 0000000000000000 x5 : 0000000000000030
<br>
x6 : 000000007fe7e9cd x7 : 000000000000000f
<br>
x8 : 0000000000000038 x9 : 0000000000000008
<br>
x10: 000000007ddbd530 x11: 00000000ffffffd0
<br>
x12: 0000000000000000 x13: 0000000000000200
<br>
x14: 0000000000000001 x15: 0000000000000008
<br>
x16: 000000000000003f x17: 000000000000009a
<br>
x18: 000000007ddacde8 x19: 0000000000300000
<br>
x20: 000000007fead720 x21: 000000007fe04a20
<br>
x22: 000000000000071f x23: 000000007fe04a20
<br>
x24: 0000000000000001 x25: 000000007ddbd2f8
<br>
x26: 000000007fe9ac18 x27: 0000000000300000
<br>
x28: 0000000003000040 x29: 000000007dda07c0
<br>
<br>
Resetting CPU ...
<br>
<br>
### ERROR ### Please RESET the board ###
<br>
<br>
<div>--------------------------------------------</div>
<div>Can this be about the load address being
at 0x00300000 and the .img being fetched at 0x3000000?</div>
<div><br>
</div>
</div>
</div>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Wed, Apr 14, 2021 at 7:08
PM <<a href="mailto:Jan.Sommer@dlr.de" moz-do-not-send="true">Jan.Sommer@dlr.de</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div lang="DE">
<div class="gmail-m_-7921491799131444898WordSection1">
<p class="MsoNormal"><span lang="EN-US">Hi Richi,</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">In your log it
says:</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">Image Type: ARM
Linux Kernel Image (gzip compressed)</span><span lang="EN-US"></span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">At least for our
zedboard devices we use the following main options for
mkimage.</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">mkimage -A arm -O
rtems -T kernel
</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">Which yields for
me:</span></p>
<p class="MsoNormal"><span lang="EN-US">Image Type: ARM
RTEMS Kernel Image (gzip compressed)</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">IIRC the
difference between -O rtems and -O linux is subtle,
but maybe that helps.</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">Best regards,</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US"> Jan</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<div style="border-top:none;border-right:none;border-bottom:none;border-left:1.5pt
solid blue;padding:0cm 0cm 0cm 4pt">
<div>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt
solid rgb(225,225,225);padding:3pt 0cm 0cm">
<p class="MsoNormal"><b>From:</b> devel <<a href="mailto:devel-bounces@rtems.org" target="_blank" moz-do-not-send="true">devel-bounces@rtems.org</a>>
<b>On Behalf Of
</b>Richi Dubey<br>
<b>Sent:</b> Wednesday, April 14, 2021 3:22 PM<br>
<b>To:</b> Kinsey Moore <<a href="mailto:kinsey.moore@oarcorp.com" target="_blank" moz-do-not-send="true">kinsey.moore@oarcorp.com</a>><br>
<b>Cc:</b> <a href="mailto:rtems-devel@rtems.org" target="_blank" moz-do-not-send="true">rtems-devel@rtems.org</a>
<<a href="mailto:devel@rtems.org" target="_blank" moz-do-not-send="true">devel@rtems.org</a>><br>
<b>Subject:</b> Re: Booting a rtems exe on Zynq
UltraScale+ MPSoC ZCU106 board</p>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">Trying to boot directly from the
.img file also fails:</p>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">ZynqMP> tftpboot 0x3000000
rdubey/sp01.img
<br>
Using ethernet@ff0e0000 device
<br>
TFTP from server 172.19.0.3; our IP address is
172.19.2.40 <br>
Filename 'rdubey/sp01.img'.
<br>
Load address: 0x3000000
<br>
Loading: ####
<br>
6.1 MiB/s
<br>
done
<br>
Bytes transferred = 50978 (c722 hex)
<br>
ZynqMP> bootm 0x3000000 ; reset
<br>
## Booting kernel from Legacy Image at 03000000
... <br>
Image Name: RTEMS
<br>
Image Type: ARM Linux Kernel Image (gzip
compressed) <br>
Data Size: 50914 Bytes = 49.7 KiB
<br>
Load Address: 00300000
<br>
Entry Point: 00300000
<br>
Verifying Checksum ... OK
<br>
Uncompressing Kernel Image ... OK
<br>
FDT and ATAGS support not compiled in - hanging
<br>
### ERROR ### Please RESET the board ###
</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">What can I do now?</p>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<div>
<p class="MsoNormal">On Wed, Apr 14, 2021 at 6:11 PM
Kinsey Moore <<a href="mailto:kinsey.moore@oarcorp.com" target="_blank" moz-do-not-send="true">kinsey.moore@oarcorp.com</a>>
wrote:</p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt
solid rgb(204,204,204);padding:0cm 0cm 0cm
6pt;margin-left:4.8pt;margin-right:0cm">
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">If
you’re only running RTEMS, you should be
able to drop the FDT commands since that
what appears to be causing the problem and I
don’t think that the arm/xilinx_zynqmp BSP
uses it at all.</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">Kinsey</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt
solid rgb(225,225,225);padding:3pt 0cm 0cm">
<p class="MsoNormal" style="margin-left:36pt">
<b><span lang="EN-US">From:</span></b><span lang="EN-US"> Richi Dubey <<a href="mailto:richidubey@gmail.com" target="_blank" moz-do-not-send="true">richidubey@gmail.com</a>>
<br>
<b>Sent:</b> Wednesday, April 14, 2021
01:01<br>
<b>To:</b> Kinsey Moore <<a href="mailto:kinsey.moore@oarcorp.com" target="_blank" moz-do-not-send="true">kinsey.moore@oarcorp.com</a>>;
<a href="mailto:rtems-devel@rtems.org" target="_blank" moz-do-not-send="true">rtems-devel@rtems.org</a>
<<a href="mailto:devel@rtems.org" target="_blank" moz-do-not-send="true">devel@rtems.org</a>><br>
<b>Subject:</b> Booting a rtems exe on
Zynq UltraScale+ MPSoC ZCU106 board</span></p>
</div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">Hi,</span></p>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">I followed the <a href="https://docs.rtems.org/branches/master/user/bsps/bsps-arm.html#xilinx-zynqmp" target="_blank" moz-do-not-send="true">
8.2.23 docs</a> to build rtems for
the xilinx_zynqmp_ultra96 bsp since it
was the only bsp corresponding to
xilinx-zynqmp in the rtems-bsp. </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">Then I followed the
boot via Uboot section <a href="https://docs.rtems.org/branches/master/user/bsps/bsps-arm.html#boot-via-u-boot" target="_blank" moz-do-not-send="true">
8.2.1.1 on docs</a>, but the uboot on
zcu106 does not have a run loadfdt
command, and its alternative is fdt addr
[address]. But something is wrong, I
cannot run the sp01.img file:</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">With fdt:</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">------------------------------</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">ZynqMP> tftpboot
0x3000000 rdubey/sp01.img
</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">Using ethernet@ff0e0000
device
<br>
TFTP from server 172.19.0.3; our IP
address is 172.19.2.40
<br>
Filename 'rdubey/sp01.img'.
<br>
Load address: 0x3000000
<br>
Loading: ####
<br>
6.9 MiB/s
<br>
done
<br>
Bytes transferred = 50978 (c722 hex)
<br>
ZynqMP> fdt addr 0x2A00000
<br>
ZynqMP> bootm 0x3000000 - 0x2A00000
; reset
<br>
## Booting kernel from Legacy Image at
03000000 ...
<br>
Image Name: RTEMS
<br>
Image Type: ARM Linux Kernel Image
(gzip compressed)
<br>
Data Size: 50914 Bytes = 49.7 KiB
<br>
Load Address: 00300000
<br>
Entry Point: 00300000
<br>
Verifying Checksum ... OK
<br>
## Flattened Device Tree blob at
02a00000
<br>
Booting using the fdt blob at
0x2a00000
<br>
Uncompressing Kernel Image ... OK
<br>
Loading Device Tree to
0000000007ff1000, end 0000000007fff257
... OK <br>
fdt_find_or_add_subnode: chosen:
FDT_ERR_BADSTRUCTURE
<br>
ERROR: /chosen node create failed
<br>
- must RESET the board to recover.
<br>
<br>
FDT creation failed! hanging...### ERROR
### Please RESET the board ### </span></p>
</div>
<div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">------------------------------</span></p>
</div>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">With loading the
system.dtb that I generally use for
loading yocto linux images:</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">---------------------</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">ZynqMP> tftpboot
0x2A00000 rdubey/system.dtb
<br>
Using ethernet@ff0e0000 device
<br>
TFTP from server 172.19.0.3; our IP
address is 172.19.253.142
<br>
Filename 'rdubey/system.dtb'.
<br>
Load address: 0x2a00000
<br>
Loading: ###T #
<br>
8.8 KiB/s
<br>
done
<br>
Bytes transferred = 45656 (b258 hex)
<br>
ZynqMP> tftpboot 0x3000000
rdubey/sp01.img
<br>
Using ethernet@ff0e0000 device
<br>
TFTP from server 172.19.0.3; our IP
address is 172.19.253.142
<br>
Filename 'rdubey/sp01.img'.
<br>
Load address: 0x3000000
<br>
Loading: ####
<br>
1.7 MiB/s
<br>
done
<br>
Bytes transferred = 50978 (c722 hex)
<br>
ZynqMP> bootm 0x3000000 - 0x2A00000
; reset
<br>
## Booting kernel from Legacy Image at
03000000 ...
<br>
Image Name: RTEMS
<br>
Image Type: ARM Linux Kernel Image
(gzip compressed)
<br>
Data Size: 50914 Bytes = 49.7 KiB
<br>
Load Address: 00300000
<br>
Entry Point: 00300000
<br>
Verifying Checksum ... OK
<br>
## Flattened Device Tree blob at
02a00000
<br>
Booting using the fdt blob at
0x2a00000
<br>
Uncompressing Kernel Image ... OK
<br>
Loading Device Tree to
0000000007ff1000, end 0000000007fff257
... OK <br>
<br>
Starting kernel ...
<br>
<br>
"Synchronous Abort" handler, esr
0x02000000
<br>
elr: ffffffff90593000 lr :
0000000010081868 (reloc)
<br>
elr: 0000000000300000 lr :
000000007fdee868
<br>
x0 : 0000000000000000 x1 :
0000000000000000
<br>
x2 : 0000000007ff1000 x3 :
0000000000000000
<br>
x4 : 0000000000300000 x5 :
0000000000000000
<br>
x6 : 0000000000000008 x7 :
0000000000000000
<br>
x8 : 000000007dda0650 x9 :
0000000001008000
<br>
x10: 000000000a200023 x11:
0000000000000002
<br>
x12: 0000000000000002 x13:
00000000000096f4
<br>
x14: 000000007dda06ac x15:
000000007fdee224
<br>
x16: 0000000000000002 x17:
0000000007fff258
<br>
x18: 000000007ddacde8 x19:
000000007fead720
<br>
x20: 0000000000000000 x21:
0000000000000400
<br>
x22: 000000000000071f x23:
000000007fdeedb8
<br>
x24: 0000000000000003 x25:
000000007ddbd378
<br>
x26: 000000007fe9ac18 x27:
0000000000300000
<br>
x28: 0000000003000040 x29:
000000007dda0790
<br>
<br>
Resetting CPU ...
<br>
<br>
### ERROR ### Please RESET the board
### </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">---------------------</span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US"> </span></p>
</div>
<div>
<p class="MsoNormal" style="margin-left:36pt">
<span lang="EN-US">What might be going
wrong? zcu106 is a multi processor
board, so do I need to do something
special to run the sp01 test? I have not
tested any other .exe (or .img) so far.</span></p>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</blockquote>
</body>
</html>