<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4134.100" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I use a board with 68k 16Mhz processor and a
QUART ( 68C94 : 4 x uart).</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The QUART provide a timer interrupt
which</FONT> <FONT face=Arial size=2>call rtems_clock_tick (interval
: 5 mS).</FONT></DIV>
<DIV><FONT face=Arial size=2>Thus, I have four interrupts Rx and one
interrupt timer.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My application use Termios support ( buffer V24),
.</FONT></DIV>
<DIV><FONT face=Arial size=2>It's running properly at 9600 baud but not at 19200
baud.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>At 19200 baud, the RTS/CTS handshake is never
switched and no datas are reading !</FONT></DIV>
<DIV><FONT face=Arial size=2>But nevertheless, the hanshake running properly at
9600...<BR></FONT></DIV>
<DIV><FONT face=Arial size=2>How to solve this problem ?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks a lot ( for previous answer also ;)
)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Stan.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> </DIV>
<DIV><BR><BR></DIV>
<DIV><BR></DIV></FONT>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>