<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Heinz.<br>
<br>
I just booted your 'hello.ralf' you sent me off-line on my mvme2100<br>
which worked fine (see below). Hence, I suspect something with<br>
your setup must be wrong (did you check the PReP network boot<br>
setting in ENV?)<br>
<br>
HTH<br>
-- Till<br>
<br>
PPC5-Bug>nbo<br>
Network Booting from: DEC21143, Controller 0, Device 0<br>
Device Name: /pci@fec00000/pci1011,19@e,0:0,0<br>
Loading: Operating System<br>
<br>
Client IP Address = 134.79.33.137<br>
Server IP Address = 134.79.33.86<br>
Gateway IP Address = 0.0.0.0<br>
Subnet IP Address Mask = 255.255.252.0<br>
Boot File Name = hello.ralf<br>
Argument File Name = <br>
<br>
Network Boot File load in progress... To abort hit <BREAK><br>
<br>
Bytes Received =&175944, Bytes Loaded =&175944<br>
Bytes/Second =&175944, Elapsed Time =1 Second(s)<br>
<br>
Residual-Data Located at: $01F5511C<br>
<br>
Model: 0 (e2)<br>
Serial: MOT06B6D26 <br>
Processor/Bus frequencies (Hz): 199998720/66666240<br>
Time Base Divisor: 4000<br>
Memory Size: 2000000<br>
<br>
PCI: Probing PCI hardware<br>
<br>
RTEMS 4.x/PPC load: <br>
Uncompressing the kernel...<br>
done<br>
Now booting...<br>
-----------------------------------------<br>
Welcome to rtems-4.9.99.0(PowerPC/Generic (classic FPU)/mvme2100) on
MVME 2100<br>
-----------------------------------------<br>
pci : Configuring interrupt routing for 'MVME 2100'<br>
pci : Device 0:0x00:0 routed to interrupt_line 16<br>
pci : Device 0:0x0D:0 routed to interrupt_line 23<br>
pci : Device 0:0x0E:0 routed to interrupt_line 17<br>
Cleared PCI errors: pci_stat was 0x20A0<br>
WARNING: unable to allocate page table, keeping DBAT0<br>
WARNING: unable to setup page tables VME bridge must share PCI space<br>
OpenPIC Version 1.2 (1 CPUs and 24 IRQ sources) at 0xFCE40000<br>
OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 1<br>
Overriding NumSources (24) from configuration with 16<br>
OpenPIC timer frequency is 8333216 Hz<br>
Universe II PCI-VME bridge detected at 0xFCDFF000, IRQ 23<br>
Universe Master Ports:<br>
Port VME-Addr Size PCI-Adrs Mode:<br>
0: 0x20000000 0x0E000000 0x90000000 A32, D64 [MBLT], Dat, Sup<br>
1: 0x00000000 0x00FF0000 0x9F000000 A24, D64 [MBLT], Dat, Sup<br>
2: 0x00000000 0x00010000 0x9FFF0000 A16, D64, Dat, Sup<br>
Universe Slave Ports:<br>
Port VME-Addr Size PCI-Adrs Mode:<br>
0: 0xC0000000 0x02000000 0x00000000 A32, Pgm, Dat, Sup, Usr, PWEN,
PREN<br>
Registering /dev/console as minor 0 (==/dev/ttyS0)<br>
<br>
<br>
*** HELLO WORLD TEST ***<br>
Hello World<br>
*** END OF HELLO WORLD TEST ***<br>
<br>
<br>
<br>
On 06/08/2010 07:49 AM, Heinz Junkes wrote:
<blockquote
cite="mid:FA5C9D41-CE36-41D0-BCFB-D24E50B5606E@fhi-berlin.mpg.de"
type="cite">
<pre wrap="">Hi,
i have now made a fresh installtion of rtems-tools 4.10 from source for powerpc on debian lenny 5.0.4.
>From the cvs i have loaded the rtems-4.9.4.
I could the hello_world test file. But still run into "Illegal Instruction" when i start hello.ralf
as i mentioned in my last mail:
Network Boot File load in progress... To abort hit<BREAK>
Bytes Received =&2524435, Bytes Loaded =&2524435
Bytes/Second =&841478, Elapsed Time =3 Second(s)
Exception: Program (Illegal Instruction)
SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700
...
The cpu board i use have 64 Mbyte of memory installed. Have i to modify mvme2100.cfg, linkcmds ?
Will the mvme3100 - board run with RTEMS? I would buy such kind of boards if i can not get the mvme2100
to run in the next two month ...
Regards,
Heinz</pre>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
rtems-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:rtems-users@rtems.org">rtems-users@rtems.org</a>
<a class="moz-txt-link-freetext" href="http://www.rtems.org/mailman/listinfo/rtems-users">http://www.rtems.org/mailman/listinfo/rtems-users</a>
</pre>
</blockquote>
<br>
</body>
</html>