<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi @all,<br>
I hope I am asking in the right mailing list. <br>
</p>
<p>This probably has already been asked, but I wasnt able to find
anything suiting my problem case.<br>
</p>
<p>I want to run RTEMS (and later on EPICS, but this shall not be
part of this request here) on my Raspberry Pi 2 B.<br>
So I followed various guides on how to get RTEMS compiled for ARM
/ raspberry pi, and got a seemingly successful build of RTEMS 4.12
including the sample programs.<br>
I then made a binary out of the ticker.exe and copied it over onto
my boot partition of the SD card. neccessary proprietary broadcom
bootloader files are present.</p>
<p>Now when I try and turn the raspi on, it just shows the color
splash screen on HDMI and prints out unreadable, strange
characters on UART console. they are not always the same.<br>
(I try to append an Image)</p>
<p><img src="cid:part1.B3EA04E5.199BCC55@fhi-berlin.mpg.de" alt=""
class="" width="553" height="340"></p>
<p>the same happens with hello.exe and the older RTEMS 4.11.</p>
<p>Normally the Raspberry should display readable status messages on
UART for approx. 35 seconds and then halt.</p>
<p>Maybe somebody here has an Idea whats the issue? Do I have to
tell RTEMS (somehow) what serial connection should be used and at
what speed it should operate? I am really new to RTEMS and
therefore missing even an Idea where to start searching.<br>
Or should I ask in devel mailing list too?</p>
<p>Thanks in advance;<br>
</p>
<pre class="moz-signature" cols="72">--
William Kirstaedter (PP&B)
Fritz-Haber-Institut der MPG
Faradayweg 4-6
14195 Berlin
Tel: 030 8413 3154
Mail: <a class="moz-txt-link-abbreviated" href="mailto:kirstaedter@fhi-berlin.mpg.de">kirstaedter@fhi-berlin.mpg.de</a></pre>
</body>
</html>