[Bug 2088] CSB337 (CSB637 variant) does not boot properly

[bugzilla-daemon at rtems.org]

https://www.rtems.org/bugzilla/show_bug.cgi?id=2088

--- Comment #2 from Wendell P Silva <silvawp at gmail.com> 2013-02-02 14:12:57 CST ---
Yes. It prints. But just when RTEMS_DEBUG is defined.

See the console output: (additional prints are mine. trying to debug - couldn't
enable post-morten debugging).

uMON>xmodem -d
sx -vv ticker.bin 
Sending ticker.bin, 1216 blocks: Give your local XMODEM receive command now.
Bytes Sent: 155776   BPS:2467                            

Transfer complete

*** exit status: 0
Rcvd 1217 pkts (
uMON>
uMON>
uMON>call $APPRAMBASE
Register /dev/com0 as the CONSOLE
call deviceInitialize(minor) 20101CBC(0)
return**************
call deviceInitialize(minor) 2010215C(1)
return***************
call deviceInitialize(minor) 20101878(2)
moncomptr = 10000020
                    SED1356 is in LCD Mode.  <--- Unexpected reset here!
SED1356 init complete.
No Compact FLASH Card Detected.
TFS Scanning //FLASH/...
MICRO MONITOR 1.16.8
Platform: Cogent CSB637
CPU: AT91RM9200 ARM920T
Built: Mar  9 2009 @ 11:01:21
Monitor RAM: 0x20000000-0x2001e384
Application RAM Base: 0x20100000
MAC: 00:30:23:37:02:E3
IP: 192.168.1.10
uMON>

-- 
Configure bugmail: https://www.rtems.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.