[RTEMS Project] #3170: Microzed libtest/block08 fails to print end of test correctly.

[RTEMS trac]

#3170: Microzed libtest/block08 fails to print end of test correctly.
------------------------------+--------------------------
 Reporter:  Chris Johns       |       Owner:  Chris Johns
     Type:  defect            |      Status:  assigned
 Priority:  high              |   Milestone:  4.12.0
Component:  unspecified       |     Version:  4.12
 Severity:  critical          |  Resolution:
 Keywords:  zedboard testing  |
------------------------------+--------------------------

Comment (by Chris Johns):

 Replying to [comment:6 Sebastian Huber]:
 > Do you use a polled or interrupt driven console driver?

 I use the default configuration:

 {{{
 configure --target=arm-rtems4.12
 --prefix=/opt/work/chris/rtems/kernel/4.12 --disable-networking --enable-
 rtemsbsp=xilinx_zynq_zedboard --enable-maintainer-mode --enable-tests
 }}}

 I have always assumed the default configuration for '''any''' BSP lets the
 tests run. Is this not the case?

 > The tests need a polled console driver.

 What do I do to make this happen?

--
Ticket URL: <http://devel.rtems.org/ticket/3170#comment:7>
RTEMS Project <http://www.rtems.org/>
RTEMS Project