RTEMS | Add the support for i2c driver in the aarch64/raspberrypi bsp (!363)

[Gedare Bloom (@gedare)]

Gedare Bloom commented on a discussion on bsps/aarch64/raspberrypi/i2c/raspberrypi-i2c.c: https://gitlab.rtems.org/rtems/rtos/rtems/-/merge_requests/363#note_125323

 > +
 > +  bus->input_clock = clock_rate;
 > +
 > +  return 0;
 > +}
 > +
 > +static int rpi_i2c_setup_transfer( raspberrypi_i2c_bus *bus )
 > +{
 > +  int rv;
 > +  while ( bus->remaining_transfers > 0 ) {
 > +    bus->remaining_bytes = bus->remaining_transfers > 1 ?
 > +                             BCM2711_I2C_DLEN_MASK :
 > +                             ( bus->current_buffer_size & BCM2711_I2C_DLEN_MASK
 > +                             );
 > +    BCM2835_REG( bus->base_address + BCM2711_I2C_DLEN ) = bus->remaining_bytes;
 > +    S_REG( bus ) = S_ERR | S_CLKT | S_DONE;

ok, this is not intuitive. It might be worth defining some helper macros for this.

-- 
View it on GitLab: https://gitlab.rtems.org/rtems/rtos/rtems/-/merge_requests/363#note_125323
You're receiving this email because of your account on gitlab.rtems.org.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/bugs/attachments/20250625/4480c865/attachment.htm>