RTEMS | bsp/arm/tms570: Board selection and EMAC MII pin fragments (!1434)

[Kinsey Moore (@opticron)]

Kinsey Moore commented on a discussion on spec/build/bsps/arm/tms570/optboardlchxl2.yml: https://gitlab.rtems.org/rtems/rtos/rtems/-/merge_requests/1434#note_157457

 > +- env-enable: null
 > +build-type: option
 > +copyrights:
 > +- Copyright (C) 2020 embedded brains GmbH & Co. KG
 > +default:
 > +- enabled-by: true
 > +  value: false
 > +description: |
 > +  If set to true, then the board specific setup selects the LAUNCHXL2-570LC43
 > +  LaunchPad wiring instead of the Hercules Development Kit (HDK) wiring.  The
 > +  two boards use the same TMS570LC4357 chip but route the EMAC MII signals to
 > +  different terminals, and the LaunchPad drives its PHY reference clock and
 > +  reset from the chip.  Only meaningful when TMS570_VARIANT is 4357.
 > +enabled-by: true
 > +links: []
 > +name: TMS570_BOARD_LCHXL2_570LC43

If there are only 2 possible configurations for this, I might suggest changing the option name to something along the lines of `USE_ALTERNATE_PINS` instead of using board names that might not apply for other boards using this configuration.

-- 
View it on GitLab: https://gitlab.rtems.org/rtems/rtos/rtems/-/merge_requests/1434#note_157457
You're receiving this email because of your account on gitlab.rtems.org. Unsubscribe from this thread: https://gitlab.rtems.org/-/sent_notifications/5-41sprdpzanla00rfbdauo8ouc-1d/unsubscribe | Manage all notifications: https://gitlab.rtems.org/-/profile/notifications | Help: https://gitlab.rtems.org/help


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/bugs/attachments/20260820/4a33e1c0/attachment-0001.htm>