RTEMS | aarch64: add rockpro64 BSP support to RTEMS (#5414)

[Ning Yang (@yangn0)]

Ning Yang commented: https://gitlab.rtems.org/rtems/rtos/rtems/-/issues/5414#note_138156


u-boot `bdinfo`:
```
=> bdinfo
boot_params = 0x0000000000000000
DRAM bank   = 0x0000000000000000
-> start    = 0x0000000000200000
-> size     = 0x00000000f7e00000
flashstart  = 0x0000000000000000
flashsize   = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate    = 1500000 bps
relocaddr   = 0x00000000f3f21000
reloc off   = 0x00000000f3721000
Build       = 64-bit
current eth = ethernet at fe300000
ethaddr     = b6:ac:e8:f3:40:85
IP addr     = <NULL>
fdt_blob    = 0x00000000f1f01850
Video       = vop at ff8f0000 inactive
Video       = vop at ff900000 inactive
lmb_dump_all:
 memory.count = 0x1
 memory[0]      [0x200000-0xf7ffffff], 0xf7e00000 bytes, flags: none
 reserved.count = 0x2
 reserved[0]    [0xf0efe000-0xf0f00fff], 0x3000 bytes, flags: no-notify, no-overwrite
 reserved[1]    [0xf0f01840-0xf7ffffff], 0x70fe7c0 bytes, flags: no-overwrite
devicetree  = separate
serial addr = 0x00000000ff1a0000
 width      = 0x0000000000000004
 shift      = 0x0000000000000002
 offset     = 0x0000000000000000
 clock      = 0x00000000016e3600
arch_number = 0x0000000000000000
TLB addr    = 0x00000000f7ff0000
irq_sp      = 0x00000000f1f01840
sp start    = 0x00000000f1f01840
Early malloc usage: 22b8 / 10000
```

-- 
View it on GitLab: https://gitlab.rtems.org/rtems/rtos/rtems/-/issues/5414#note_138156
You're receiving this email because of your account on gitlab.rtems.org.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/bugs/attachments/20260108/790fa3fb/attachment.htm>