[rtems-test] arm/beagleboneblack: Passed:547 Failed:9 Timeout:3 Invalid:0
Chris Johns
chrisj at rtems.org
Sat Nov 4 01:47:58 UTC 2017
Testing time : 1:19:39.513747
Average test time: 0:00:08.444370
Host
====
FreeBSD-11.1-RELEASE-amd64-64bit-ELF (FreeBSD ruru 11.1-RELEASE FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 amd64)
Summary
=======
Passed: 547
Failed: 9
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Invalid: 0
------------------
Total: 566
Failures:
spintrcritical10.exe
spintrcritical05.exe
fsrfsbitmap01.exe
spcache01.exe
tmtimer01.exe
tmcontext01.exe
sp51.exe
debugger01.exe
fsjffs2gc01.exe
User Input:
top.exe
monitor.exe
termios.exe
fileio.exe
Benchmark:
dhrystone.exe
whetstone.exe
linpack.exe
Timeouts:
spintrcritical07.exe
dl02.exe
spintrcritical15.exe
Log
===
RTEMS Testing - Tester, 4.12 (24d51f7e4b03)
Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=beagleboneblack --timeout=60 --user-config=/home/chris/.rtemstesterrc --log=t.txt --mail .
Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
Host: FreeBSD-11.1-RELEASE-amd64-64bit-ELF (FreeBSD ruru 11.1-RELEASE FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 amd64)
[ 1/566] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | arm/beagleboneblack: dhrystone.exe
<<skipping passes>>
[ 16/566] p:12 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: fsjffs2gc01.exe
Result: failed Time: 0:00:05.329569 fsjffs2gc01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 11:29:57 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 75468 Bytes = 73.70 kB = 0.07 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *######
] 2.9 MiB/s
] done
] Bytes transferred = 75532 (1270c hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 0:29:57 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 75468 Bytes = 73.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: FSJFFS2GC 1
] *** BEGIN OF TEST FSJFFS2GC 1 ***
] Initializing filesystem JFFS2
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/fstests/fsjffs2gc01/init.c: 284 memcmp(&info, &info_after_first_gc, sizeof(*&info)) == 0
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[ 17/566] p:12 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: fsnofs01.exe
[ 18/566] p:13 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: fsrfsbitmap01.exe
Result: failed Time: 0:00:05.306886 fsrfsbitmap01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 11:30:07 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 102894 Bytes = 100.48 kB = 0.10 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe.img
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 2.6 MiB/s
] done
] Bytes transferred = 102958 (1922e hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 0:30:07 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 102894 Bytes = 100.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: FSRFSBITMAP 1
] *** BEGIN OF TEST FSRFSBITMAP 1 ***
] Initializing filesystem RFS
]
] START of RFS Bitmap Unit Test
] Bit set value : 0
] Bit clear value : 1
] Num bit per element : zd
]
] RFS Bitmap Test : size = zd (zd)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (zd):
] R0 = 0x00000073 R8 = 0x8011042C
] R1 = 0x80110428 R9 = 0x8002AEC5
] R2 = 0x44E09000 R10 = 0x00000000
] R3 = 0x80110428 R11 = 0x00000FFF
] R4 = 0x8002AEC4 R12 = 0x00000FFF
] R5 = 0x00000000 SP = 0x80110390
] R6 = 0x00000000 LR = 0x8000A394
] R7 = 0x8002AEC4 PC = 0x8000A804
] CPSR = 0x20000113 VEC = 0x00000004
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[ 19/566] p:13 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: fsrofs01.exe
<<skipping passes>>
[ 82/566] p:76 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: debugger01.exe
Result: failed Time: 0:00:05.843869 debugger01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/debugger01/debugger01.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/debugger01/debugger01.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/debugger01/debugger01.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 11:38:18 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 75894 Bytes = 74.12 kB = 0.07 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/debugger01/debugger01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *######
] 2.6 MiB/s
] done
] Bytes transferred = 75958 (128b6 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 0:38:18 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 75894 Bytes = 74.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v4.2) ARMv7 [v7, baseline CP14 registers] breakpoints:5 watchpoints:1
]
] R0 = 0x0000005C R8 = 0x00000000
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000003 R10 = 0x00000000
] R3 = 0x03078002 R11 = 0x801037B0
] R4 = 0x801029F0 R12 = 0x801029F4
] R5 = 0x00000002 SP = 0x8010CB68
] R6 = 0x80114450 LR = 0x800155AC
] R7 = 0x00000000 PC = 0x800155F0
] CPSR = 0x20000113 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[ 83/566] p:76 f:3 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: defaultconfig01.exe
<<skipping passes>>
[ 91/566] p:84 f:3 u:0 e:0 I:0 B:3 t:0 i:0 | arm/beagleboneblack: dl02.exe
Result: timeout Time: 0:01:06.108537 dl02.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/dl02/dl02.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/dl02/dl02.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/dl02/dl02.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 11:39:02 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 104564 Bytes = 102.11 kB = 0.10 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/dl02/dl02.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 2.7 MiB/s
] done
] Bytes transferred = 104628 (198b4 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 0:39:02 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 104564 Bytes = 102.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] load: /dl-o1.o
] handle: 0x801178d0 has unresolved externals
] load: /dl-o2.o
] handle: 0x80118208 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o1.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o2.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] *** TIMEOUT TIMEOUT
[ 92/566] p:84 f:3 u:0 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: dl03.exe
<<skipping passes>>
[359/566] p:347 f:3 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: sp51.exe
Result: failed Time: 0:00:05.250557 sp51.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp51/sp51.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp51/sp51.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp51/sp51.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:19:19 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 41909 Bytes = 40.93 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp51/sp51.exe.img
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.5 MiB/s
] done
] Bytes transferred = 41973 (a3f5 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:19:19 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 41909 Bytes = 40.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/sp51/init.c: 41 sc == RTEMS_SUCCESSFUL
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[360/566] p:347 f:4 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: sp52.exe
<<skipping passes>>
[387/566] p:374 f:4 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: spcache01.exe
Result: failed Time: 0:00:04.739489 spcache01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spcache01/spcache01.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spcache01/spcache01.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spcache01/spcache01.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:22:03 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 44756 Bytes = 43.71 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spcache01/spcache01.exe.img
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.5 MiB/s
] done
] Bytes transferred = 44820 (af14 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:22:03 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 44756 Bytes = 43.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] data cache flush and invalidate test
] data cache operations by line passed the test (copy-back cache detected)
] data cache line size zi bytes
] data cache size zi bytes
] load zi bytes with flush entire data
] duration with normal cache 4096 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load zi bytes with flush multiple data
] duration with normal cache 4096 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load zi bytes with invalidate multiple data
] duration with normal cache 4096 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] store zi bytes with flush entire data
] duration with normal cache 4096 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store zi bytes with flush multiple data
] duration with normal cache 4096 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store zi bytes with invalidate multiple data
] duration with normal cache 4096 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] instruction cache line size zi bytes
] instruction cache size zi bytes
]
] R0 = 0x00000001 R8 = 0x60000113
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x60000113
] R3 = 0x20C5187D R11 = 0x00000000
] R4 = 0x00000001 R12 = 0x00000001
] R5 = 0x00000000 SP = 0x801076A0
] R6 = 0x00000001 LR = 0x80001878
] R7 = 0x00000000 PC = 0x80002300
] CPSR = 0x00000193 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[388/566] p:374 f:5 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: spcbssched01.exe
<<skipping passes>>
[452/566] p:438 f:5 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: spintrcritical05.exe
Result: failed Time: 0:00:40.710798 spintrcritical05.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical05/spintrcritical05.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical05/spintrcritical05.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical05/spintrcritical05.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:30:36 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 44467 Bytes = 43.42 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical05/spintrcritical05.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.5 MiB/s
] done
] Bytes transferred = 44531 (adf3 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:30:36 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 44467 Bytes = 43.4 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: SPINTRCRITICAL 5
] *** BEGIN OF TEST SPINTRCRITICAL 5 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout (Reverse)
] Init - Case not hit - ran too long
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[453/566] p:438 f:6 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: spintrcritical06.exe
[454/566] p:439 f:6 u:4 e:0 I:0 B:3 t:1 i:0 | arm/beagleboneblack: spintrcritical07.exe
Result: timeout Time: 0:01:06.004424 spintrcritical07.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical07/spintrcritical07.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical07/spintrcritical07.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:32:07 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 44806 Bytes = 43.76 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (14 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.1 MiB/s
] done
] Bytes transferred = 44870 (af46 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:32:07 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 44806 Bytes = 43.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: SPINTRCRITICAL 7
] *** BEGIN OF TEST SPINTRCRITICAL 7 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - There is no way for the test to know if it hits the case
] Init - Variation is: Priority/Restart Search Task (Backward)
] *** TIMEOUT TIMEOUT
[455/566] p:439 f:6 u:4 e:0 I:0 B:3 t:2 i:0 | arm/beagleboneblack: spintrcritical08.exe
<<skipping passes>>
[457/566] p:441 f:6 u:4 e:0 I:0 B:3 t:2 i:0 | arm/beagleboneblack: spintrcritical10.exe
Result: failed Time: 0:00:39.464285 spintrcritical10.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical10/spintrcritical10.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical10/spintrcritical10.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:33:41 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 45116 Bytes = 44.06 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.5 MiB/s
] done
] Bytes transferred = 45180 (b07c hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:33:41 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 45116 Bytes = 44.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] Init - Trying to generate any satisfied before timeout while blocking on event
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical10/init.c: 144 ctx->hit
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[458/566] p:441 f:7 u:4 e:0 I:0 B:3 t:2 i:0 | arm/beagleboneblack: spintrcritical11.exe
<<skipping passes>>
[462/566] p:445 f:7 u:4 e:0 I:0 B:3 t:2 i:0 | arm/beagleboneblack: spintrcritical15.exe
Result: timeout Time: 0:01:05.633716 spintrcritical15.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical15/spintrcritical15.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical15/spintrcritical15.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical15/spintrcritical15.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:35:44 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 44871 Bytes = 43.82 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical15/spintrcritical15.exe.img
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.5 MiB/s
] done
] Bytes transferred = 44935 (af87 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:35:44 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 44871 Bytes = 43.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: SPINTRCRITICAL 15
] *** BEGIN OF TEST SPINTRCRITICAL 15 ***
] Init - Trying to generate timeout of a thread while another is blocking
] Init - on the same thread queue
] Init - There is no way for the test to know if it hits the case
] Init - rtems_semaphore_create - OK
] Init - rtems_task_create - OK
] *** TIMEOUT TIMEOUT
[463/566] p:445 f:7 u:4 e:0 I:0 B:3 t:3 i:0 | arm/beagleboneblack: spintrcritical16.exe
<<skipping passes>>
[563/566] p:545 f:7 u:4 e:0 I:0 B:3 t:3 i:0 | arm/beagleboneblack: tmcontext01.exe
Result: failed Time: 0:00:05.274952 tmcontext01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmcontext01/tmcontext01.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmcontext01/tmcontext01.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmcontext01/tmcontext01.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:47:24 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 42606 Bytes = 41.61 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmcontext01/tmcontext01.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.5 MiB/s
] done
] Bytes transferred = 42670 (a6ae hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:47:24 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 42606 Bytes = 41.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: TMCONTEXT 1
] *** BEGIN OF TEST TMCONTEXT 1 ***
] <Test>
] <ContextSwitchTest environment="normal">
] <Sample functionNestLevel="0">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="1">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="2">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="3">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="4">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="5">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="6">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="7">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="8">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="9">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="10">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="11">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="12">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="13">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="14">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="15">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] </ContextSwitchTest>
] <ContextSwitchTest environment="dirty">
]
] R0 = 0x00000008 R8 = 0x000004B4
] R1 = 0x00000008 R9 = 0x4C4F4144
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20C5187D R11 = 0x801156F4
] R4 = 0x00000000 R12 = 0x00000008
] R5 = 0x00000000 SP = 0x801156D0
] R6 = 0x00000000 LR = 0x8000059C
] R7 = 0x00000000 PC = 0x80000C28
] CPSR = 0x00000193 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[564/566] p:545 f:8 u:4 e:0 I:0 B:3 t:3 i:0 | arm/beagleboneblack: tmfine01.exe
<<skipping passes>>
[566/566] p:547 f:8 u:4 e:0 I:0 B:3 t:3 i:0 | arm/beagleboneblack: tmtimer01.exe
Result: failed Time: 0:00:06.518439 tmtimer01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmtimer01/tmtimer01.exe.img
=> target pretest: rtems-bbb-mkimg ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmtimer01/tmtimer01.exe
=> Image: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmtimer01/tmtimer01.exe
=> Image Name: RTEMS
=> Created: Sat Nov 4 12:47:51 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 43163 Bytes = 42.15 kB = 0.04 MB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmtimer01/tmtimer01.exe.img
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.4 MiB/s
] done
] Bytes transferred = 43227 (a8db hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-04 1:47:51 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 43163 Bytes = 42.2 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
]
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] <TMTimer01 timerCount="zu">
] <Sample>
] <ActiveTimers>zu</ActiveTimers>
] R0 = 0x00000000 R8 = 0x00000020
] R1 = 0x00000008 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20C5187D R11 = 0x00000000
] R4 = 0x80011234 R12 = 0x00000008
] R5 = 0x12010001 SP = 0x80106DF0
] R6 = 0x00000000 LR = 0x80000544
] R7 = 0x8010277C PC = 0x80000BB4
] CPSR = 0x00000113 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
=> target off: cs-pw-ctl off 1
Passed: 547
Failed: 9
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Invalid: 0
------------------
Total: 566
Failures:
spintrcritical10.exe
spintrcritical05.exe
fsrfsbitmap01.exe
spcache01.exe
tmtimer01.exe
tmcontext01.exe
sp51.exe
debugger01.exe
fsjffs2gc01.exe
User Input:
top.exe
monitor.exe
termios.exe
fileio.exe
Benchmark:
dhrystone.exe
whetstone.exe
linpack.exe
Timeouts:
spintrcritical07.exe
dl02.exe
spintrcritical15.exe
Average test time: 0:00:08.444370
Testing time : 1:19:39.513747
More information about the build
mailing list