[rtems-test] arm/xilinx_zynq_zedboard: smp: Passed:586 Failed:17 Timeout:3 Invalid:3 Wrong:1
Chris Johns
chrisj at rtems.org
Sun Nov 5 09:49:22 UTC 2017
Testing time : 1:56:24.292722
Average test time: 0:00:11.319761
Host
====
FreeBSD-11.1-RELEASE-amd64-64bit-ELF (FreeBSD ruru 11.1-RELEASE FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 amd64)
Configuration
=============
Version: 4.11.99.0.a54d10d177
Build : smp
Tools : 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
Summary
=======
Passed: 586
Failed: 17
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Invalid: 3
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 1
------------------
Total: 617
Failures:
sp51.exe
smp09.exe
paranoia.exe
sp20.exe
smpfatal03.exe
smp03.exe
smpschedaffinity04.exe
smpschedsem01.exe
math.exe
smp02.exe
mathf.exe
complex.exe
fsrfsbitmap01.exe
smp01.exe
smp07.exe
smp08.exe
capture01.exe
User Input:
fileio.exe
monitor.exe
top.exe
termios.exe
Benchmark:
linpack.exe
dhrystone.exe
whetstone.exe
Timeouts:
spintrcritical07.exe
dl02.exe
smp05.exe
Invalid:
spsysinit01.exe
spinternalerror01.exe
sptimecounter01.exe
Wrong Tools:
smpfatal01.exe
Log
===
RTEMS Testing - Tester, 4.12 (71aaa0a71b01 modified)
Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=xilinx_zynq_zedboard --log=t.txt --user-config=/home/chris/.rtemstesterrc --mail .
Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
Host: FreeBSD-11.1-RELEASE-amd64-64bit-ELF (FreeBSD ruru 11.1-RELEASE FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 amd64)
[ 1/617] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: dhrystone.exe
<<skipping passes>>
[ 18/617] p:14 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: fsrfsbitmap01.exe
Result: failed Time: 0:00:04.269739 fsrfsbitmap01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 18:54:32 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 102383 Bytes = 99.98 kB = 0.10 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/fstests/fsrfsbitmap01/fsrfsbitmap01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#######
] 3.8 MiB/s
] done
] Bytes transferred = 102447 (1902f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 102383 Bytes = 100 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: FSRFSBITMAP 1
] *** BEGIN OF TEST FSRFSBITMAP 1 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] Initializing filesystem RFS
]
] START of RFS Bitmap Unit Test
] Bit set value : 0
] Bit clear value : 1
] Num bit per element : zd
]
] RFS Bitmap Test : size = zd (zd)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (zd):
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 19/617] p:14 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: fsrofs01.exe
<<skipping passes>>
[ 78/617] p:73 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: capture01.exe
Result: failed Time: 0:00:03.675050 capture01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/capture01/capture01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/capture01/capture01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/capture01/capture01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:03:44 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 73206 Bytes = 71.49 kB = 0.07 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/capture01/capture01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 4.1 MiB/s
] done
] Bytes transferred = 73270 (11e36 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 73206 Bytes = 71.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: CAPTURE 1
] *** BEGIN OF TEST CAPTURE 1 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] atch priority ceiling is 100
] watch priority floor is 102
] global watch is enabled
] total 1
=> test end: CAPTURE 1
] 00000000 ???? g- T:*** END OF TEST CAPTURE 1 ***
] S------ F:-----
] error: Test 1: cannot mutex: RTEMS_TOO_MANY
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 79/617] p:73 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: complex.exe
Result: failed Time: 0:00:03.708855 complex.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/complex/complex.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/complex/complex.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/complex/complex.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:03:48 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 84389 Bytes = 82.41 kB = 0.08 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (9 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/complex/complex.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 4.7 MiB/s
] done
] Bytes transferred = 84453 (149e5 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 84389 Bytes = 82.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: COMPLEX
] *** BEGIN OF TEST COMPLEX ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] abs : 1.414214
] cacos : 0.904557 -1.061275i
] cacosh : 1.061275 0.904557i
] carg : 0.785398
] casin : 0.666239 1.061275i
] casinh : 1.061275 0.666239i
] catan : 1.017222 0.402359i
] catanh : 0.402359 1.017222i
] ccos : 0.833730 -0.988898i
] ccosh : 0.833730 0.988898i
] cexp : 1.468694 2.287355i
] cimag : 1.000000
] clog : 0.346574 0.785398i
] conj : 1.000000 -1.000000i
] cpow : 2.807879 1.317865i
] cproj : 1.000000 1.000000i
] creal : 1.000000
] csin : 1.298458 0.634964i
] csinh : 0.634964 1.298458i
] csqrt : 1.098684 0.455090i
] ctan : 0.271753 1.083923i
] ctanh : 1.083923 0.271753i
] cabsf : 1.414214
] cacosf : 0.904557 -1.061275i
] cacoshf: 1.061275 0.904557i
] cargf : 0.785398
] casinf : 0.666239 1.061275i
] casinhf: 1.061275 0.666239i
] catanf : 1.017222 0.402359i
] catanhf: 0.402359 1.017222i
] ccosf : 0.833730 -0.988898i
] ccoshf : 0.833730 0.988898i
] cexpf : 1.468694 2.287355i
] cimagf : 1.000000
] clogf : 0.346574 0.785398i
] conjf : 1.000000 -1.000000i
] cpowf : 2.807879 1.317865i
] cprojf : 1.000000 1.000000i
] crealf : 1.000000
] csinf : 1.298458 0.634964i
] csinhf : 0.634964 1.298458i
=> test end: COMPLEX
] csqrtf : 1.098684 0.45509*** END OF TEST COMPLEX ***
] 0i
] ctanf : 0.271753 1.083923i
] ctanhf : 1.083923 0.271753i
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 80/617] p:73 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: cpuuse.exe
<<skipping passes>>
[ 91/617] p:84 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: dl02.exe
Result: timeout Time: 0:03:08.175351 dl02.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dl02/dl02.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dl02/dl02.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dl02/dl02.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:05:19 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 105058 Bytes = 102.60 kB = 0.10 MB
=> Load Address: 00104000
=> Entry Point: 00104000
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dl02/dl02.exe.img
] ... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.140 (9 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *########
] 3.9 MiB/s
] done
] Bytes transferred = 105122 (19aa2 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 105058 Bytes = 102.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] load: /dl-o1.o
] handle: 0x21b0c0 has unresolved externals
] load: /dl-o2.o
] handle: 0x21b9b8 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o1.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o2.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] *** TIMEOUT TIMEOUT
[ 92/617] p:84 f:3 u:0 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: dl03.exe
<<skipping passes>>
[107/617] p:99 f:3 u:0 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: math.exe
Result: failed Time: 0:00:04.793528 math.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/math/math.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/math/math.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/math/math.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:11:07 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 91462 Bytes = 89.32 kB = 0.09 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ..... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/math/math.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#######
] 3.5 MiB/s
] done
] Bytes transferred = 91526 (16586 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 91462 Bytes = 89.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: MATH
] *** BEGIN OF TEST MATH ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] cos : 1.570796
] acosh : nan
] asin : 1.570796
] asinh : 0.881374
] atan : 0.665774
] atan2 : 0.785398
] atanh : inf
] cbrt : 3.000000
] ceil : 4.000000
] copysign : -3.500000
] cos : 0.000000
] cosh : 2.509178
] erf : 1.000000
] erfc : 0.000000
] exp : 1.521962
] exp2 : 1.337928
] expm1 : 0.000420
] fabs : 1.123000
] fdim : 0.000000
] floor : 0.000000
] floor : -1.000000
] fma : 7.630000
] fmax : 0.420000
] fmin : -0.420000
] fmod : 0.000000
] fpclassify : 4
] frexp : 0.656250
] hypot : 59.396970
] ilogb : 5
] isfinite : 1
] isgreater : 0
] isgreaterequal : 0
] isinf : 0
] isless : 1
] islessequal : 1
] islessgreater : 1
] isnan : 0
] isnormal : 1
] isunordered : 1
] j0 : 0.671133
] j1 : 0.498289
] jn : 0.159349
] ldexp : 9.600000
] lgamma : 114.034212
] llrint : 0.000000
] llrint : 0.000000
] lround : -1.000000
] lround : 1.000000
] log : 3.737670
] log10 : 1.623249
] log1p : 3.761200
] log2 : 5.392317
] logb : 5.000000
] lrint : 0.000000
] lrint : 0.000000
] lround : -1.000000
] lround : 1.000000
] lmodf : 0.000000
] nan : nan
] nearbyint : 2.000000
] nextafter : 1.500000
] pow : 9.060100
] remainder : -0.990000
] remquo : -1.000000
] rint : 0.000000
] rint : -0.000000
] round : 1.000000
] round : -1.000000
] scalbln : 9.600000
] scalbn : 9.600000
] signbit : 0
] sin : 0.707107
] sinh : 0.868671
] sqrt : 3.000000
] tan : 1.000000
] tanh : 0.655794
] tgamma : 1.046486
] trunc : 3.000000
=> test end: MATH
] y0 : 0.22*** END OF TEST MATH ***
] 8084
] y1 : -0.621136
] yn : -3.589900
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[108/617] p:99 f:4 u:0 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: mathf.exe
Result: failed Time: 0:00:03.692542 mathf.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/mathf/mathf.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/mathf/mathf.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/mathf/mathf.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:11:12 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 86702 Bytes = 84.67 kB = 0.08 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/mathf/mathf.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 4.1 MiB/s
] done
] Bytes transferred = 86766 (152ee hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 86702 Bytes = 84.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: MATHF
] *** BEGIN OF TEST MATHF ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] cosf : 1.570796
] acoshf : nan
] asinf : 1.570796
] asinhf : 0.881374
] atanf : 0.665774
] atan2f : 0.785398
] atanhf : inf
] cbrtf : 3.000000
] ceilf : 4.000000
] copysignf : -3.500000
] cosf : -0.000000
] coshf : 2.509179
] erff : 1.000000
] erfcf : 0.000000
] expf : 1.521962
] exp2f : 1.337928
] expm1f : 0.000420
] fabsf : 1.123000
] fdimf : 0.000000
] floorf : 0.000000
] floorf : -1.000000
] fmaf : 7.630000
] fmaxf : 0.420000
] fminf : -0.420000
] fmodf : 0.000000
] fpclassify : 4
] frexpf : 0.656250
] hypotf : 59.396969
] ilogbf : 5
] isfinite : 1
] isgreater : 0
] isgreaterequal : 0
] isinf : 0
] isless : 1
] islessequal : 1
] islessgreater : 1
] isnan : 0
] isnormal : 1
] isunordered : 1
] j0f : 0.671133
] j1f : 0.498289
] jnf : 0.159349
] ldexpf : 9.600000
] lgammaf : 114.034218
] llrintf : 0.000000
] llrintf : 0.000000
] lroundf : -1.000000
] lroundf : 1.000000
] logf : 3.737670
] log10f : 1.623249
] log1pf : 3.761200
] log2f : 5.392318
] logbf : 5.000000
] lrintf : 0.000000
] lrintf : 0.000000
] lroundf : -1.000000
] lroundf : 1.000000
] lmodff : 0.000000
] nanf : nan
] nearbyintf : 2.000000
] nextafterf : 1.500000
] powf : 9.060100
] remainderf : -0.990000
] remquof : -1.000000
] rintf : 0.000000
] rintf : -0.000000
] roundf : 1.000000
] roundf : -1.000000
] scalblnf : 9.600000
] scalbnf : 9.600000
] signbit : 0
] sinf : 0.707107
] sinhf : 0.868671
] sqrtf : 3.000000
] tanf : 1.000000
] tanhf : 0.655794
] tgammaf : 1.046486
] truncf : 3.000000
=> test end: MATHF
] y0f : 0.22*** END OF TEST MATHF ***
] 8083
] y1f : -0.621136
] ynf : -3.589899
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[109/617] p:99 f:5 u:0 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: mathl.exe
<<skipping passes>>
[309/617] p:295 f:5 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: paranoia.exe
Result: failed Time: 0:00:04.192346 paranoia.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/paranoia/paranoia.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/paranoia/paranoia.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/paranoia/paranoia.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:38:07 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 88285 Bytes = 86.22 kB = 0.08 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/paranoia/paranoia.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#######
] 4 MiB/s
] done
] Bytes transferred = 88349 (1591d hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 88285 Bytes = 86.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PARANOIA
] *** BEGIN OF TEST PARANOIA ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] aranoia version 1.1 [cygnus]
] Program is now RUNNING tests on small integers:
] TEST: 0+0 != 0, 1-1 != 0, 1 <= 0, or 1+1 != 2
] PASS: 0+0 != 0, 1-1 != 0, 1 <= 0, or 1+1 != 2
] TEST: 3 != 2+1, 4 != 3+1, 4+2*(-2) != 0, or 4-3-1 != 0
] PASS: 3 != 2+1, 4 != 3+1, 4+2*(-2) != 0, or 4-3-1 != 0
] TEST: -1+1 != 0, (-1)+abs(1) != 0, or -1+(-1)*(-1) != 0
] PASS: -1+1 != 0, (-1)+abs(1) != 0, or -1+(-1)*(-1) != 0
] TEST: 1/2 + (-1) + 1/2 != 0
] PASS: 1/2 + (-1) + 1/2 != 0
] TEST: 9 != 3*3, 27 != 9*3, 32 != 8*4, or 32-27-4-1 != 0
] PASS: 9 != 3*3, 27 != 9*3, 32 != 8*4, or 32-27-4-1 != 0
] TEST: 5 != 4+1, 240/3 != 80, 240/4 != 60, or 240/5 != 48
] PASS: 5 != 4+1, 240/3 != 80, 240/4 != 60, or 240/5 != 48
] -1, 0, 1/2, 1, 2, 3, 4, 5, 9, 27, 32 & 240 are O.K.
]
] Searching for Radix and Precision.
] Radix = 2.000000 .
] Closest relative separation found is U1 = 1.1102230e-16 .
]
] Recalculating radix and precision
] confirms closest relative separation U1 .
] Radix confirmed.
] TEST: Radix is too big: roundoff problems
] PASS: Radix is too big: roundoff problems
] TEST: Radix is not as good as 2 or 10
] PASS: Radix is not as good as 2 or 10
] TEST: (1-U1)-1/2 < 1/2 is FALSE, prog. fails?
] PASS: (1-U1)-1/2 < 1/2 is FALSE, prog. fails?
] TEST: Comparison is fuzzy,X=1 but X-1/2-1/2 != 0
] PASS: Comparison is fuzzy,X=1 but X-1/2-1/2 != 0
] The number of significant digits of the Radix is 53.000000 .
] TEST: Precision worse than 5 decimal figures
] PASS: Precision worse than 5 decimal figures
] TEST: Subtraction is not normalized X=Y,X+Z != Y+Z!
] PASS: Subtraction is not normalized X=Y,X+Z != Y+Z!
] Subtraction appears to be normalized, as it should be.
] Checking for guard digit in *, /, and -.
] TEST: * gets too many final digits wrong.
]
] PASS: * gets too many final digits wrong.
]
] TEST: Division lacks a Guard Digit, so error can exceed 1 ulp
] or 1/3 and 3/9 and 9/27 may disagree
] PASS: Division lacks a Guard Digit, so error can exceed 1 ulp
] or 1/3 and 3/9 and 9/27 may disagree
] TEST: Computed value of 1/1.000..1 >= 1
] PASS: Computed value of 1/1.000..1 >= 1
] TEST: * and/or / gets too many last digits wrong
] PASS: * and/or / gets too many last digits wrong
] *, /, and - appear to have guard digits, as they should.
] Checking rounding on multiply, divide and add/subtract.
] TEST: X * (1/X) differs from 1
] PASS: X * (1/X) differs from 1
] Multiplication appears to round correctly.
] Division appears to round correctly.
] TEST: Radix * ( 1 / Radix ) differs from 1
] PASS: Radix * ( 1 / Radix ) differs from 1
] TEST: Incomplete carry-propagation in Addition
] PASS: Incomplete carry-propagation in Addition
] Addition/Subtraction appears to round correctly.
] Checking for sticky bit.
] Sticky bit apparently used correctly.
] TEST: lack(s) of guard digits or failure(s) to correctly round or chop
] (noted above) count as one flaw in the final tally below
] PASS: lack(s) of guard digits or failure(s) to correctly round or chop
] (noted above) count as one flaw in the final tally below
]
] Does Multiplication commute? Testing on 20 random pairs.
] No failures found in 20 integer pairs.
]
] Running test of square root(x).
] TEST: Square root of 0.0, -0.0 or 1.0 wrong
] PASS: Square root of 0.0, -0.0 or 1.0 wrong
] Testing if sqrt(X * X) == X for 20 Integers X.
] Test for sqrt monotonicity.
] sqrt has passed a test for Monotonicity.
] Testing whether sqrt is rounded or chopped.
] Square root appears to be correctly rounded.
] Testing powers Z^i for small Integers Z and i.
] ... no discrepancies found.
]
] Seeking Underflow thresholds UfThold and E0.
] Smallest strictly positive number found is E0 = 4.94066e-324 .
] Since comparison denies Z = 0, evaluating (Z + Z) / Z should be safe.
] What the machine gets for (Z + Z) / Z is 2.00000000000000000e+00 .
] This is O.K., provided Over/Underflow has NOT just been signaled.
] Underflow is gradual; it incurs Absolute Error =
] (roundoff in UfThold) < E0.
] The Underflow threshold is 2.22507385850720188e-308, below which
] calculation may suffer larger Relative error than merely roundoff.
] Since underflow occurs below the threshold
] UfThold = (2.00000000000000000e+00) ^ (-1.02200000000000000e+03)
] only underflow should afflict the expression
] (2.00000000000000000e+00) ^ (-2.04400000000000000e+03);
] actually calculating yields: 0.00000000000000000e+00 .
] This computed value is O.K.
]
] Testing X^((X + 1) / (X - 1)) vs. exp(2) = 7.38905609893065218e+00 as X -> 1.
] Accuracy seems adequate.
] Testing powers Z^Q at four nearly extreme values.
] ... no discrepancies found.
]
] Searching for Overflow threshold:
] This may generate an error.
] Can `Z = -Y' overflow?
] Trying it on Y = -inf .
] Seems O.K.
] Overflow threshold is V = 1.79769313486231571e+308 .
] Overflow saturates at V0 = inf .
] No Overflow should be signaled for V * 1 = 1.79769313486231571e+308
] nor for V / 1 = 1.79769313486231571e+308 .
] Any overflow signal separating this * from the one
] above is a DEFECT.
]
]
] What message and/or values does Division by Zero produce?
] Trying to compute 1 / 0 produces ... inf .
]
] Trying to compute 0 / 0 produces ... nan .
]
]
] No failures, defects nor flaws have been discovered.
] Rounding appears to conform to the proposed IEEE standard P754.
=> test end: PARANOIA
] The*** END OF TEST PARANOIA ***
] arithmetic diagnosed appears to be Excellent!
] END OF TEST.
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[310/617] p:295 f:6 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: ticker.exe
<<skipping passes>>
[312/617] p:297 f:6 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: smp01.exe
Result: failed Time: 0:00:03.654650 smp01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp01/smp01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp01/smp01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp01/smp01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:39:43 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 75741 Bytes = 73.97 kB = 0.07 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (9 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp01/smp01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 5.2 MiB/s
] done
] Bytes transferred = 75805 (1281d hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 75741 Bytes = 74 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMP 1
] *** BEGIN OF TEST SMP 1 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 start task
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[313/617] p:297 f:7 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: smp02.exe
Result: failed Time: 0:00:03.716092 smp02.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp02/smp02.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp02/smp02.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp02/smp02.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:39:46 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 75689 Bytes = 73.92 kB = 0.07 MB
=> Load Address: 00104000
=> Entry Point: 00104000
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp02/smp02.exe.img
] .... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (9 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 3.8 MiB/s
] done
] Bytes transferred = 75753 (127e9 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 75689 Bytes = 73.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMP 2
] *** BEGIN OF TEST SMP 2 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 start task TA1
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Obtain
] CPU 0 Task TA2 Release
] CPU 0 Task TA2 Ob
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[314/617] p:297 f:8 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: smp03.exe
Result: failed Time: 0:00:03.667167 smp03.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp03/smp03.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp03/smp03.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp03/smp03.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:39:50 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 79831 Bytes = 77.96 kB = 0.08 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp03/smp03.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 4 MiB/s
] done
] Bytes transferred = 79895 (13817 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 79831 Bytes = 78 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMP 3
] *** BEGIN OF TEST SMP 3 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 running task Init
] CPU 0 running task
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[315/617] p:297 f:9 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | arm/xilinx_zynq_zedboard: smp05.exe
Result: timeout Time: 0:03:07.742599 smp05.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp05/smp05.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp05/smp05.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp05/smp05.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:39:54 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 75390 Bytes = 73.62 kB = 0.07 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp05/smp05.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 3.8 MiB/s
] done
] Bytes transferred = 75454 (126be hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 75390 Bytes = 73.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SMP 5
] *** BEGIN OF TEST SMP 5 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 start task TA1
] Shut down from CPU 0
] CPU 1 start task TA2
] *** TIMEOUT TIMEOUT
[316/617] p:297 f:9 u:4 e:0 I:0 B:3 t:2 i:0 W:0 | arm/xilinx_zynq_zedboard: smp07.exe
Result: failed Time: 0:00:09.294541 smp07.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp07/smp07.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp07/smp07.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp07/smp07.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:43:05 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 77820 Bytes = 76.00 kB = 0.07 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp07/smp07.exe.img
] DHCP client bound to address 10.10.5.144 (5 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 3.5 MiB/s
] done
] Bytes transferred = 77884 (1303c hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 77820 Bytes = 76 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SMP 7
] *** BEGIN OF TEST SMP 7 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 start task TA1
] CPU 1 create and start timer
] CPU 0 runnng Task TA1 and blocking
] CPU 0 running
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[317/617] p:297 f:10 u:4 e:0 I:0 B:3 t:2 i:0 W:0 | arm/xilinx_zynq_zedboard: smp08.exe
Result: failed Time: 0:01:12.824492 smp08.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp08/smp08.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp08/smp08.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp08/smp08.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:43:15 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 82451 Bytes = 80.52 kB = 0.08 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp08/smp08.exe.img
] DHCP client bound to address 10.10.5.144 (8 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 3.7 MiB/s
] done
] Bytes transferred = 82515 (14253 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 82451 Bytes = 80.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMP 8
] *** BEGIN OF TEST SMP 8 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 running task Init - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 0 running task TA01 - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 0 running task TA02 - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 1 running task TA06 - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 1 running task TA05 - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 1 running task TA04 - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 1 running task TA03 - rtems_clock_get_tod 09:00:00 12/31/1988
] CPU 0 running task TA01 - rtems_clock_get_tod 09:00:05 12/31/1988
] CPU 0 running task TA02 - rtems_clock_get_tod 09:00:10 12/31/1988
] CPU 1 running task TA01 - rtems_clock_get_tod 09:00:10 12/31/1988
] CPU 1 running task TA01 - rtems_clock_get_tod 09:00:15 12/31/1988
] CPU 1 running task TA03 - rtems_clock_get_tod 09:00:15 12/31/1988
] CPU 1 running task TA01 - rtems_clock_get_tod 09:00:20 12/31/1988
] CPU 0 running task TA02 - rtems_clock_get_tod 09:00:20 12/31/1988
] CPU 0 running task TA04 - rtems_clock_get_tod 09:00:20 12/31/1988
] CPU 0 running task TA01 - rtems_clock_get_tod 09:00:25 12/31/1988
] CPU 0 running task TA05 - rtems_clock_get_tod 09:00:25 12/31/1988
] CPU 0 running task TA02 - rtems_clock_get_tod 09:00:30 12/31/1988
] CPU 1 running task TA01 - rtems_clock_get_tod 09:00:30 12/31/1988
] CPU 0 running task TA03 - rtems_clock_get_tod 09:00:30 12/31/1988
] CPU 1 running task TA06 - rtems_clock_get_tod 09:00:30 12/31/1988
]
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[318/617] p:297 f:11 u:4 e:0 I:0 B:3 t:2 i:0 W:0 | arm/xilinx_zynq_zedboard: smp09.exe
Result: failed Time: 0:00:04.298854 smp09.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp09/smp09.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp09/smp09.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp09/smp09.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:44:28 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 77601 Bytes = 75.78 kB = 0.07 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smp09/smp09.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 2.8 MiB/s
] done
] Bytes transferred = 77665 (12f61 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 77601 Bytes = 75.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMP 9
] *** BEGIN OF TEST SMP 9 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] CPU 1 start task TA1
] kill 10 clock ticks
] -------------------------------------------------------------------------------
] CPU USAGE BY THREAD
] ------------+----------------------------------------+---------------+---------
] ID | NAME | SECONDS | PERCENT
] ------------+----------------------------------------+---------------+---------
] 0x09010001 | IDLE | 1.014515 | 91.117
] 0x09010002 | IDLE | 1.000004 | 89.535
] 0x0A010001 | UI1 | 0.120350 | 10.742
] 0x0A010002 | TA1 | 0.109311 | 9.726
] ------------+----------------------------------------+---------------+---------
] TIME SINCE LAST CPU USAGE RESET IN SECONDS: 1.123827
] -------------------------------------------------------------------------------
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[319/617] p:297 f:12 u:4 e:0 I:0 B:3 t:2 i:0 W:0 | arm/xilinx_zynq_zedboard: smpaffinity01.exe
<<skipping passes>>
[327/617] p:304 f:12 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: smpfatal03.exe
Result: failed Time: 0:00:03.768208 smpfatal03.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpfatal03/smpfatal03.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpfatal03/smpfatal03.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpfatal03/smpfatal03.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:45:19 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 48303 Bytes = 47.17 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (257 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpfatal03/smpfatal03.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 48367 (bcef hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48303 Bytes = 47.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMPFATAL 3
] *** BEGIN OF TEST SMPFATAL 3 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/smptests/smpfatal03/init.c: 49 sc == RTEMS_SUCCESSFUL
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[328/617] p:304 f:13 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: smpfatal04.exe
<<skipping passes>>
[345/617] p:321 f:13 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: smpschedaffinity04.exe
Result: failed Time: 0:00:04.247823 smpschedaffinity04.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedaffinity04/smpschedaffinity04.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedaffinity04/smpschedaffinity04.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedaffinity04/smpschedaffinity04.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:50:53 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 55181 Bytes = 53.89 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedaffinity04/smpschedaffinity04.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (259 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 55245 (d7cd hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 55181 Bytes = 53.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMPSCHEDAFFINITY 4
] *** BEGIN OF TEST SMPSCHEDAFFINITY 4 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] Create Semaphore
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/smptests/smpschedaffinity04/init.c: 94 sc == RTEMS_SUCCESSFUL
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[346/617] p:321 f:14 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: smpschedaffinity05.exe
<<skipping passes>>
[350/617] p:325 f:14 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: smpschedsem01.exe
Result: failed Time: 0:00:03.685601 smpschedsem01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedsem01/smpschedsem01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedsem01/smpschedsem01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedsem01/smpschedsem01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 19:51:39 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 54948 Bytes = 53.66 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/smptests/smpschedsem01/smpschedsem01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.4 MiB/s
] done
] Bytes transferred = 55012 (d6e4 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 54948 Bytes = 53.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SMPSCHEDSEM 01
] *** BEGIN OF TEST SMPSCHEDSEM 01 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/smptests/smpschedsem01/init.c: 45 sc == RTEMS_SUCCESSFUL
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[351/617] p:325 f:15 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: smpscheduler01.exe
<<skipping passes>>
[381/617] p:355 f:15 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: sp20.exe
Result: failed Time: 0:03:24.201148 sp20.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp20/sp20.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp20/sp20.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp20/sp20.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 20:01:27 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 64616 Bytes = 63.10 kB = 0.06 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp20/sp20.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 2.9 MiB/s
] done
] Bytes transferred = 64680 (fca8 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 64616 Bytes = 63.1 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 20
] *** BEGIN OF TEST SP 20 ***
] TA1 - rtems_rate_monotonic_creaTTTTTTTTTTTTTTTTTTA5 - PERIODS CHECK OK (1)
] TA5 - PERIODS CHECK OK (2)
] TA5 - PERIODS CHECK OK (3)
] TA5 - PERIODS CHECK OK (4)
] TA5 - PERIODS CHECK OK (5)
] TA6 - Actual: 10 Expected: 10 - OK
] TA6 - Actual: 20 Expected: 2 T T T T T T T T TA5 - PERIODS CHECK OK (6)
] TA5 - PERIODS CHECK OK (7)
] TA5 - PERIODS CHECK OK (8)
] TA5 - PERIODS CHECK OK (9)
] TA
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[382/617] p:355 f:16 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: sp2038.exe
<<skipping passes>>
[410/617] p:383 f:16 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: sp51.exe
Result: failed Time: 0:00:03.675414 sp51.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp51/sp51.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp51/sp51.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp51/sp51.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 20:12:42 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 47842 Bytes = 46.72 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp51/sp51.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3 MiB/s
] done
] Bytes transferred = 47906 (bb22 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47842 Bytes = 46.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/sp51/init.c: 41 sc == RTEMS_SUCCESSFUL
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[411/617] p:383 f:17 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: sp52.exe
<<skipping passes>>
[496/617] p:468 f:17 u:4 e:0 I:0 B:3 t:2 i:0 W:1 | arm/xilinx_zynq_zedboard: spinternalerror01.exe
Result: invalid Time: 0:00:07.374086 spinternalerror01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01/spinternalerror01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01/spinternalerror01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01/spinternalerror01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 20:25:26 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 29124 Bytes = 28.44 kB = 0.03 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01/spinternalerror01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 2.5 MiB/s
] done
] Bytes transferred = 29188 (7204 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 29124 Bytes = 28.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4Ñ
] ¥*‚8 €”˜PA €" 1*¥¡*”˜–“<è4ÅÌåÎÁ…¤0Š·k
] ¥*”˜ ”Ð À” -2¡*”˜‚I Ð Ö0¡*”˜”<L7ÉÁ2±ƒ¸4(B
] c at s1Æ 27#9³¦7³639f$†°
] ·7t¹6¥5Æ ”c)2ÕÁɱƒ9&©(C¨¥ p”˜PA €" 1*¥Ñ
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (257 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[497/617] p:468 f:17 u:4 e:0 I:0 B:3 t:2 i:1 W:1 | arm/xilinx_zynq_zedboard: spinternalerror02.exe
<<skipping passes>>
[505/617] p:476 f:17 u:4 e:0 I:0 B:3 t:2 i:1 W:1 | arm/xilinx_zynq_zedboard: spintrcritical07.exe
Result: timeout Time: 0:03:08.261746 spintrcritical07.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07/spintrcritical07.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07/spintrcritical07.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 20:27:47 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 50551 Bytes = 49.37 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (265 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.4 MiB/s
] done
] Bytes transferred = 50615 (c5b7 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50551 Bytes = 49.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SPINTRCRITICAL 7
] *** BEGIN OF TEST SPINTRCRITICAL 7 ***
] *** TEST VERSION: 4.11.99.0.a54d10d177
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 4.12, RSB 76d9db31feb7835c66f926d280ea717b7933e152, Newlib 2.5.0.20170922)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - There is no way for the test to know if it hits the case
] Init - Variation is: Priority/Restart Search Task (Backward)
] *** TIMEOUT TIMEOUT
[506/617] p:476 f:17 u:4 e:0 I:0 B:3 t:3 i:1 W:1 | arm/xilinx_zynq_zedboard: spintrcritical08.exe
<<skipping passes>>
[555/617] p:525 f:17 u:4 e:0 I:0 B:3 t:3 i:1 W:1 | arm/xilinx_zynq_zedboard: spsysinit01.exe
Result: invalid Time: 0:00:07.864941 spsysinit01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01/spsysinit01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01/spsysinit01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01/spsysinit01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 20:43:16 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 52918 Bytes = 51.68 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01/spsysinit01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 2.8 MiB/s
] done
] Bytes transferred = 52982 (cef6 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 52918 Bytes = 51.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4Ñ
] ¥*‚8 €”˜&f$1*¥¡*”˜–“<è4ÅÌåÎÁ…¤0Š·k
] ¥*”˜ ”Ð À” -2¡*”˜‚I Ð Ö0¡*”˜”<L7ÉÁ2±ƒ¸4(B
] c at s1Æ 27#9³¦7³639f$†°
] ·7t¹6¥5Æ ”c)2ÕÁɱƒ9&©(
=> test end: None
] *** END OF TEST SPSYSINIT 1 ***
]
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
=> tftp: re-requesting exe; target must have reset
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.140 (5 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[556/617] p:525 f:17 u:4 e:0 I:0 B:3 t:3 i:2 W:1 | arm/xilinx_zynq_zedboard: spsyslock01.exe
<<skipping passes>>
[564/617] p:533 f:17 u:4 e:0 I:0 B:3 t:3 i:2 W:1 | arm/xilinx_zynq_zedboard: sptimecounter01.exe
Result: invalid Time: 0:00:07.284980 sptimecounter01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01/sptimecounter01.exe.img
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01/sptimecounter01.exe
=> Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01/sptimecounter01.exe
=> Image Name: RTEMS
=> Created: Sun Nov 5 20:44:16 2017
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 31676 Bytes = 30.93 kB = 0.03 MB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01/sptimecounter01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *###
] 2.8 MiB/s
] done
] Bytes transferred = 31740 (7bfc hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 31676 Bytes = 30.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4Ñ
] ¥*‚8 €”˜(¢ðPA@ *¥¡*”˜–“<è4ÅÌåÎÁ…¤0Š·k
] ¥*”˜ ”Ð À” -2¡*”˜‚I Ð Ö0¡*”˜”<L7ÉÁ2±ƒ¸4(B
] c at s1Æ 27#9³¦7³639f$†°
] ·7t¹6¥5Æ ”c)2ÕÁɱƒ9&©(¡*”˜(¢ðPA@ *¥Ñ
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[565/617] p:533 f:17 u:4 e:0 I:0 B:3 t:3 i:3 W:1 | arm/xilinx_zynq_zedboard: sptimecounter02.exe
<<skipping passes>>
[617/617] p:585 f:17 u:4 e:0 I:0 B:3 t:3 i:3 W:1 | arm/xilinx_zynq_zedboard: tmtimer01.exe
Passed: 586
Failed: 17
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Invalid: 3
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 1
------------------
Total: 617
Failures:
sp51.exe
smp09.exe
paranoia.exe
sp20.exe
smpfatal03.exe
smp03.exe
smpschedaffinity04.exe
smpschedsem01.exe
math.exe
smp02.exe
mathf.exe
complex.exe
fsrfsbitmap01.exe
smp01.exe
smp07.exe
smp08.exe
capture01.exe
User Input:
fileio.exe
monitor.exe
top.exe
termios.exe
Benchmark:
linpack.exe
dhrystone.exe
whetstone.exe
Timeouts:
spintrcritical07.exe
dl02.exe
smp05.exe
Invalid:
spsysinit01.exe
spinternalerror01.exe
sptimecounter01.exe
Wrong Tools:
smpfatal01.exe
Average test time: 0:00:11.319761
Testing time : 1:56:24.292722
More information about the build
mailing list