[rtems-test] arm/imx7: Passed:613 Failed:1 Timeout:0 Invalid:0

sebastian.huber at embedded-brains.de sebastian.huber at embedded-brains.de
Tue Nov 7 08:27:56 UTC 2017


Testing time     : 1:21:19.895839
Average test time: 0:00:07.845491

Host
====
Linux-4.4.92-18.36-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.92-18.36-default #1 SMP Tue Oct 24 15:20:18 UTC 2017 (3f3cfaa) x86_64 x86_64)

Summary
=======

Passed:        613
Failed:          1
User Input:      5
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         0
Invalid:         0
------------------
Total:         622

Failures:
 debugger01.exe
User Input:
 monitor.exe
 termios.exe
 capture.exe
 top.exe
 fileio.exe
Benchmark:
 linpack.exe
 dhrystone.exe
 whetstone.exe

Log
===

RTEMS Testing - Tester, 4.12.not_released
 Command Line: /opt/rtems-4.12/bin/rtems-test --rtems-bsp=imx7 --rtems-tools=/opt/rtems-4.12 --user-config=/home/EB/sebastian_h/.rtemstesterrc --debug-trace=output --log=l.txt --mail .
 Python: 2.7.13 (default, Mar 22 2017, 12:31:17) [GCC]
Host: Linux-4.4.92-18.36-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.92-18.36-default #1 SMP Tue Oct 24 15:20:18 UTC 2017 (3f3cfaa) x86_64 x86_64)
[  1/622] p:0   f:0   u:0   e:0   I:0   B:0   t:0   i:0   | arm/imx7: dhrystone.exe
 <<skipping passes>>
[ 82/622] p:78  f:0   u:0   e:0   I:0   B:3   t:0   i:0   | arm/imx7: debugger01.exe
Result: failed     Time: 0:00:06.540281 debugger01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems4.12/c/imx7/testsuites/libtests/debugger01/debugger01.exe.img
=>  tftp: ./arm-rtems4.12/c/imx7/testsuites/libtests/debugger01/debugger01.exe.img
] .. done
] Using FEC0 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x82000000
] Loading: *#####
] 	 5.8 MiB/s
] done
] Bytes transferred = 72645 (11bc5 hex)
] reading imx7d-mba7.dtb
] 44573 bytes read in 24 ms (1.8 MiB/s)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-11-07   7:02:33 UTC
]    Image Type:   ARM Linux Kernel Image (gzip compressed)
]    Data Size:    72581 Bytes = 70.9 KiB
]    Load Address: 80200000
]    Entry Point:  80200000
]    Verifying Checksum ... OK
] ## Flattened Device Tree blob at 88000000
]    Booting using the fdt blob at 0x88000000
]    Uncompressing Kernel Image ... OK
]    Using Device Tree in place at 88000000, end 8800de1c
] 
] Starting kernel ...
] 
] 
] 
] 
=>  test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v5.5) ARMv7 [v7.1] breakpoints:5 watchpoints:3
] [CPU:0] rtems-db: arm debug: cannot enter monitor mode
] 
] U-Boot 2016.03.rel_imx_4.1.15_2.0.0_ga-20170202 (Mar 20 2017 - 12:28:09 +0100)
] 
] CPU:   Freescale i.MX7D rev1.2 996 MHz (running at 792 MHz)
] CPU:   Extended Commercial temperature grade (-20C to 105C) at 40C
] Reset cause: POR
] Board: TQMa7D on a MBa7
] DRAM:  512 MiB
] PMIC: PFUZE3000 ID=0x30 REV=0x11
] MMC:   FSL_SDHC: 0, FSL_SDHC: 1
] In:    serial
] Out:   serial
] Err:   serial
] TQMa7 EEPROM:
]   ID: TQMa7D-AA.0101
]   SN: 70795961
]   MAC: 00:d0:93:3d:ea:ed
] Boot:	USDHC1(SD)
] Net:   FEC0, FEC1
] Normal Boot
] Hit any key to stop autoboot:  1  0 
=>  tftp: re-requesting exe; target must have reset
] FEC0 Waiting for PHY auto negotiation to complete...... done
] Using FEC0 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] resetting ...
] 
] 
] U-Boot 2016.03.rel_imx_4.1.15_2.0.0_ga-20170202 (Mar 20 2017 - 12:28:09 +0100)
] 
] CPU:   Freescale i.MX7D rev1.2 996 MHz (running at 792 MHz)
] CPU:   Extended Commercial temperature grade (-20C to 105C) at 40C
] Reset cause: POR
] Board: TQMa7D on a MBa7
] DRAM:  512 MiB
] PMIC: PFUZE3000 ID=0x30 REV=0x11
] MMC:   FSL_SDHC: 0, FSL_SDHC: 1
] In:    serial
] Out:   serial
] Err:   serial
] TQMa7 EEPROM:
]   ID: TQMa7D-AA.0101
]   SN: 70795961
]   MAC: 00:d0:93:3d:ea:ed
] Boot:	USDHC1(SD)
] Net:   FEC0, FEC1
] Normal Boot
[ 83/622] p:78  f:1   u:0   e:0   I:0   B:3   t:0   i:0   | arm/imx7: defaultconfig01.exe
 <<skipping passes>>
[622/622] p:612 f:1   u:5   e:0   I:0   B:3   t:0   i:0   | arm/imx7: tmtimer01.exe

Passed:        613
Failed:          1
User Input:      5
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         0
Invalid:         0
------------------
Total:         622

Failures:
 debugger01.exe
User Input:
 monitor.exe
 termios.exe
 capture.exe
 top.exe
 fileio.exe
Benchmark:
 linpack.exe
 dhrystone.exe
 whetstone.exe
Average test time: 0:00:07.845491
Testing time     : 1:21:19.895839


More information about the build mailing list