Build FreeBSD: FAILED 5/rtems-i386.bset on x86_64-freebsd11.1 (rtems-tools-HEAD-1)
Chris Johns
chrisj at rtems.org
Thu Nov 9 23:08:56 UTC 2017
RTEMS Source Builder - Set Builder, 5 (089327b5dcf9)
Host: FreeBSD-11.1-RELEASE-p1-amd64-64bit-ELF
FreeBSD hihi 11.1-RELEASE-p1 FreeBSD 11.1-RELEASE-p1 #0: Wed Aug 9
11:55:48 UTC 2017
root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
amd64
Build Time: 0:10:25.674772
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: rtems-tools-HEAD-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes'
Making install in .
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes'
gmake[4]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes'
gmake[4]: Nothing to be done for 'install-exec-am'.
gmake[4]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes'
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes'
Making install in po
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes/po'
gmake[3]: Nothing to be done for 'install'.
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes/po'
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/opcodes'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/etc'
gmake[2]: Nothing to be done for 'install'.
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/etc'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/intl'
gmake[2]: Nothing to be done for 'install'.
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/intl'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libdecnumber'
gmake[2]: Nothing to be done for 'install'.
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libdecnumber'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libiberty'
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libiberty/testsuite'
gmake[3]: Nothing to be done for 'all'.
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libiberty/testsuite'
if test -n ""; then \
/bin/sh ../../gdb-8.0.1/libiberty/../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/`/usr/bin/cc -O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/build/rtems/tools/5/include -print-multi-os-directory`; \
/usr/bin/install -c -m 644 ./libiberty.a /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/`/usr/bin/cc -O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/build/rtems/tools/5/include -print-multi-os-directory`/./libiberty.an; \
( cd /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/`/usr/bin/cc -O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/build/rtems/tools/5/include -print-multi-os-directory` ; chmod 644 ./libiberty.an ;ranlib ./libiberty.an ); \
mv -f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/`/usr/bin/cc -O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/build/rtems/tools/5/include -print-multi-os-directory`/./libiberty.an /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/`/usr/bin/cc -O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/build/rtems/tools/5/include -print-multi-os-directory`/./libiberty.a; \
case "" in \
/*) thd=;; \
*) thd=/build/rtems/tools/5/include/;; \
esac; \
/bin/sh ../../gdb-8.0.1/libiberty/../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris${thd}; \
for h in ../../gdb-8.0.1/libiberty/../include/ansidecl.h ../../gdb-8.0.1/libiberty/../include/demangle.h ../../gdb-8.0.1/libiberty/../include/dyn-string.h ../../gdb-8.0.1/libiberty/../include/fibheap.h ../../gdb-8.0.1/libiberty/../include/floatformat.h ../../gdb-8.0.1/libiberty/../include/hashtab.h ../../gdb-8.0.1/libiberty/../include/libiberty.h ../../gdb-8.0.1/libiberty/../include/objalloc.h ../../gdb-8.0.1/libiberty/../include/partition.h ../../gdb-8.0.1/libiberty/../include/safe-ctype.h ../../gdb-8.0.1/libiberty/../include/sort.h ../../gdb-8.0.1/libiberty/../include/splay-tree.h ../../gdb-8.0.1/libiberty/../include/timeval-utils.h; do \
/usr/bin/install -c -m 644 $h /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris${thd}; \
done; \
fi
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libiberty/testsuite'
gmake[3]: Nothing to be done for 'install'.
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libiberty/testsuite'
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/libiberty'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/readline'
gmake[2]: Nothing to be done for 'install'.
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/readline'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/sim'
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/sim/testsuite'
gmake[3]: Nothing to be done for 'install'.
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/sim/testsuite'
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/sim'
gmake[2]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
CONFIG_HEADERS=config.h:config.in \
CONFIG_COMMANDS="default depdir" \
CONFIG_FILES= \
CONFIG_LINKS= \
/bin/sh config.status
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default commands
config.status: executing depdir commands
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[4]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[5]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[6]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake all-recursive
gmake[7]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[8]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[8]: Nothing to be done for 'all-am'.
gmake[8]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[7]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[6]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[5]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[4]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[4]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/doc'
gmake[4]: Nothing to be done for 'all'.
gmake[4]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/doc'
gmake[4]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/data-directory'
gmake[4]: Nothing to be done for 'all'.
gmake[4]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/data-directory'
gmake[4]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[5]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[6]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake all-recursive
gmake[7]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[8]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[8]: Nothing to be done for 'all-am'.
gmake[8]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[7]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[6]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[5]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[4]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[3]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
/bin/sh ../../gdb-8.0.1/gdb/../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/gdb
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/gdb
transformed_name=`t='s&^&i386-rtems5-&'; \
echo gdb | sed -e "$t"` ; \
if test "x$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
/bin/sh ../../gdb-8.0.1/gdb/../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/bin ; \
/usr/bin/install -c gdb \
/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/bin/$transformed_name ; \
/bin/sh ../../gdb-8.0.1/gdb/../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/include/gdb ; \
/usr/bin/install -c -m 644 jit-reader.h /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/include/gdb/jit-reader.h
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/bin
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/include
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/include/gdb
if test "x" != x; \
then \
transformed_name=`t='s&^&i386-rtems5-&'; \
echo gcore | sed -e "$t"` ; \
if test "x$transformed_name" = x; then \
transformed_name=gcore ; \
else \
true ; \
fi ; \
/bin/sh ../../gdb-8.0.1/gdb/../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/bin ; \
/usr/bin/install -c gcore \
/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/bin/$transformed_name; \
fi
gmake[4]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[5]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/doc'
(test "ln -s" = "ln -s" && \
ln -s ../../../gdb-8.0.1/gdb/doc/all-cfg.texi gdb-cfg.texi) || \
ln ../../../gdb-8.0.1/gdb/doc/all-cfg.texi gdb-cfg.texi || \
cp ../../../gdb-8.0.1/gdb/doc/all-cfg.texi gdb-cfg.texi
date=`sed -n -e 's/^.* BFD_VERSION_DATE \(.*\)$/\1/p' ../../../gdb-8.0.1/gdb/doc/../../bfd/version.h`; \
sed -e "s/DATE/$date/" < ../../../gdb-8.0.1/gdb/doc/../version.in > version.subst
echo "@set GDBVN `sed q version.subst`" > ./GDBvn.new
if [ -n "(GDB) " ]; then \
echo "@set VERSION_PACKAGE (GDB) " >> ./GDBvn.new; \
fi
echo "@set BUGURL @uref{http://www.gnu.org/software/gdb/bugs/}" >> ./GDBvn.new
if [ "@uref{http://www.gnu.org/software/gdb/bugs/}" = "@uref{http://www.gnu.org/software/gdb/bugs/}" ]; then \
echo "@set BUGURL_DEFAULT" >> ./GDBvn.new; \
fi
if test -z "-I ../../../gdb-8.0.1/gdb/doc/../../readline/doc"; then \
echo "@set SYSTEM_READLINE" >> ./GDBvn.new; \
fi
if [ -n "" ]; then \
echo "@set SYSTEM_GDBINIT " >> ./GDBvn.new; \
fi
mv GDBvn.new GDBvn.texi
makeinfo --split-size=5000000 --split-size=5000000 -DHAVE_MAKEINFO_CLICK -I ../../../gdb-8.0.1/gdb/doc/../../readline/doc -I ../../../gdb-8.0.1/gdb/doc/../mi -I ../../../gdb-8.0.1/gdb/doc \
-o gdb.info ../../../gdb-8.0.1/gdb/doc/gdb.texinfo
../../../gdb-8.0.1/gdb/doc/gdb.texinfo:1989: warning: @xref node name should not contain `.'
../../../gdb-8.0.1/gdb/doc/gdb.texinfo:8530: warning: @pxref node name should not contain `.'
../../../gdb-8.0.1/gdb/doc/gdb.texinfo:18909: warning: @ref node name should not contain `.'
../../../gdb-8.0.1/gdb/doc/python.texi:3962: warning: @ref node name should not contain `.'
../../../gdb-8.0.1/gdb/doc/python.texi:3998: warning: @ref node name should not contain `.'
makeinfo --split-size=5000000 --split-size=5000000 -DHAVE_MAKEINFO_CLICK -I ../../../gdb-8.0.1/gdb/doc -o stabs.info ../../../gdb-8.0.1/gdb/doc/stabs.texinfo
makeinfo --split-size=5000000 --split-size=5000000 -DHAVE_MAKEINFO_CLICK -I ../../../gdb-8.0.1/gdb/doc -o annotate.info ../../../gdb-8.0.1/gdb/doc/annotate.texinfo
/bin/sh ../../../gdb-8.0.1/gdb/doc/../../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info
/usr/bin/install -c -m 644 ./gdb.info /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/gdb.info
/usr/bin/install -c -m 644 ./stabs.info /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/stabs.info
/usr/bin/install -c -m 644 ./annotate.info /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/annotate.info
install-info --info-dir=/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/gdb.info
install-info --info-dir=/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/stabs.info
install-info --info-dir=/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/annotate.info
touch gdb.1
perl ../../../gdb-8.0.1/gdb/doc/../../etc/texi2pod.pl -DHAVE_MAKEINFO_CLICK -Dman -Dgdb < ../../../gdb-8.0.1/gdb/doc/gdb.texinfo > gdb.pod
(pod2man --center="GNU Development Tools" --release="gdb-`sed q version.subst`" --section=1 gdb.pod | sed -e '/^.if n .na/d' > gdb.1.T$$ && \
mv -f gdb.1.T$$ gdb.1) || (rm -f gdb.1.T$$ && exit 1)
rm -f gdb.pod
touch gdbserver.1
perl ../../../gdb-8.0.1/gdb/doc/../../etc/texi2pod.pl -DHAVE_MAKEINFO_CLICK -Dman -Dgdbserver < ../../../gdb-8.0.1/gdb/doc/gdb.texinfo > gdbserver.pod
(pod2man --center="GNU Development Tools" --release="gdb-`sed q version.subst`" --section=1 gdbserver.pod | sed -e '/^.if n .na/d' > gdbserver.1.T$$ && \
mv -f gdbserver.1.T$$ gdbserver.1) || (rm -f gdbserver.1.T$$ && exit 1)
rm -f gdbserver.pod
touch gcore.1
perl ../../../gdb-8.0.1/gdb/doc/../../etc/texi2pod.pl -DHAVE_MAKEINFO_CLICK -Dman -Dgcore < ../../../gdb-8.0.1/gdb/doc/gdb.texinfo > gcore.pod
(pod2man --center="GNU Development Tools" --release="gdb-`sed q version.subst`" --section=1 gcore.pod | sed -e '/^.if n .na/d' > gcore.1.T$$ && \
mv -f gcore.1.T$$ gcore.1) || (rm -f gcore.1.T$$ && exit 1)
rm -f gcore.pod
test -z "/build/rtems/tools/5/share/man/man1" || /bin/sh ../../../gdb-8.0.1/gdb/doc/../../mkinstalldirs "/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man1"
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man1
/usr/bin/install -c -m 644 'gdb.1' '/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man1/i386-rtems5-gdb.1'
/usr/bin/install -c -m 644 'gdbserver.1' '/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man1/i386-rtems5-gdbserver.1'
touch gdbinit.5
perl ../../../gdb-8.0.1/gdb/doc/../../etc/texi2pod.pl -DHAVE_MAKEINFO_CLICK -Dman -Dgdbinit < ../../../gdb-8.0.1/gdb/doc/gdb.texinfo > gdbinit.pod
(pod2man --center="GNU Development Tools" --release="gdb-`sed q version.subst`" --section=5 gdbinit.pod | sed -e '/^.if n .na/d' > gdbinit.5.T$$ && \
mv -f gdbinit.5.T$$ gdbinit.5) || (rm -f gdbinit.5.T$$ && exit 1)
rm -f gdbinit.pod
test -z "/build/rtems/tools/5/share/man/man5" || /bin/sh ../../../gdb-8.0.1/gdb/doc/../../mkinstalldirs "/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man5"
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man5
/usr/bin/install -c -m 644 'gdbinit.5' '/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/man/man5/i386-rtems5-gdbinit.5'
gmake[5]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/doc'
gmake[5]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/testsuite'
gmake[5]: Nothing to be done for 'install'.
gmake[5]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/testsuite'
gmake[5]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/data-directory'
gmake[6]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/data-directory'
/bin/sh ../../../gdb-8.0.1/gdb/data-directory/../../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/syscalls
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/syscalls
files='gdb-syscalls.dtd freebsd.xml aarch64-linux.xml amd64-linux.xml arm-linux.xml i386-linux.xml mips-n32-linux.xml mips-n64-linux.xml mips-o32-linux.xml ppc-linux.xml ppc64-linux.xml s390-linux.xml s390x-linux.xml sparc-linux.xml sparc64-linux.xml' ; \
for file in $files; do \
f=../../../gdb-8.0.1/gdb/data-directory/../syscalls/$file ; \
if test -f $f ; then \
/usr/bin/install -c -m 644 $f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/syscalls ; \
fi ; \
done
files='gdb/__init__.py gdb/FrameDecorator.py gdb/FrameIterator.py gdb/frames.py gdb/printing.py gdb/prompt.py gdb/types.py gdb/unwinder.py gdb/xmethod.py gdb/command/__init__.py gdb/command/explore.py gdb/command/frame_filters.py gdb/command/pretty_printers.py gdb/command/prompt.py gdb/command/type_printers.py gdb/command/unwinders.py gdb/command/xmethods.py gdb/function/__init__.py gdb/function/as_string.py gdb/function/caller_is.py gdb/function/strfns.py gdb/printer/__init__.py gdb/printer/bound_registers.py' ; \
if test "x$files" != x ; then \
for file in $files ; do \
dir=`echo "$file" | sed 's,/[^/]*$,,'` ; \
/bin/sh ../../../gdb-8.0.1/gdb/data-directory/../../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/$dir ; \
/usr/bin/install -c -m 644 ./python/$file /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/$dir ; \
done ; \
fi
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/gdb/command
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/gdb/function
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/python/gdb/printer
files='' ; \
if test "x$files" != x ; then \
for file in $files ; do \
dir=`echo "$file" | sed 's,/[^/]*$,,'` ; \
/bin/sh ../../../gdb-8.0.1/gdb/data-directory/../../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/guile/$dir ; \
/usr/bin/install -c -m 644 ./guile/$file /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/guile/$dir ; \
done ; \
fi
/bin/sh ../../../gdb-8.0.1/gdb/data-directory/../../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/system-gdbinit
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/system-gdbinit
files='elinos.py wrs-linux.py' ; \
for file in $files; do \
f=../../../gdb-8.0.1/gdb/data-directory/../system-gdbinit/$file ; \
if test -f $f ; then \
/usr/bin/install -c -m 644 $f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/gdb/system-gdbinit ; \
fi ; \
done
gmake[6]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/data-directory'
gmake[5]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/data-directory'
gmake[5]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[6]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[7]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake all-recursive
gmake[8]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[9]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[9]: Nothing to be done for 'all-am'.
gmake[9]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[8]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[7]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[6]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[6]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[7]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[8]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake install-recursive
gmake[9]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[10]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[11]: Entering directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
if test no = no; then \
case 'freebsd11.1' in \
darwin[56]*) \
need_charset_alias=true ;; \
darwin* | cygwin* | mingw* | pw32* | cegcc*) \
need_charset_alias=false ;; \
*) \
need_charset_alias=true ;; \
esac ; \
else \
need_charset_alias=false ; \
fi ; \
if $need_charset_alias; then \
/bin/sh ../../../../gdb-8.0.1/gdb/gnulib/../../mkinstalldirs /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib ; \
fi ; \
if test -f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.alias; then \
sed -f ref-add.sed /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.alias > /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.tmp ; \
/usr/bin/install -c -m 644 /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.tmp /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.alias ; \
rm -f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.tmp ; \
else \
if $need_charset_alias; then \
sed -f ref-add.sed charset.alias > /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.tmp ; \
/usr/bin/install -c -m 644 /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.tmp /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.alias ; \
rm -f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib/charset.tmp ; \
fi ; \
fi
mkdir /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/lib
gmake[11]: Nothing to be done for 'install-data-am'.
gmake[11]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[10]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[9]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[8]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib/import'
gmake[7]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[6]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[5]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb/build-gnulib'
gmake[4]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[3]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[2]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build/gdb'
gmake[1]: Nothing to be done for 'install-target'.
gmake[1]: Leaving directory '/build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1/build'
+ /bin/rm -rf '/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/configure.info*'
+ /bin/rm -f /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/dir
+ touch /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/info/dir
+ cd /build/rtems/tools/rtems-source-builder.git/rtems/build/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1
==> %clean:
+ echo '==> %clean:'
copy: /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris => /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset
reporting: tools/rtems-gdb-8.0.1-1.cfg -> i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1.txt
making dir: /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/rtems/rsb
reporting: tools/rtems-gdb-8.0.1-1.cfg -> i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1.xml
making dir: /build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1-root-chris/build/rtems/tools/5/share/rtems/rsb
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-HEAD-1
script: 1: #!/bin/sh
script: 2: # ___build_pre in as set up in defaults.py
script: 3: # Save the original path away.
script: 4: export SB_ORIG_PATH=${PATH}
script: 5: # Directories
script: 6: SB_PREFIX="/build/rtems/tools/5"
script: 7: SB_PREFIX_CLEAN=$(echo "/build/rtems/tools/5" | /usr/bin/sed -e 's/^\///')
script: 8: SB_SOURCE_DIR="/build/rtems/tools/rtems-source-builder.git/rtems/sources"
script: 9: SB_BUILD_DIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/rtems-tools-HEAD-1"
script: 10: # host == build, use build; host != build, host uses host and build uses build
script: 11: SB_HOST_CPPFLAGS=""
script: 12: SB_HOST_CFLAGS="-O2 -pipe "
script: 13: SB_HOST_CXXFLAGS="-O2 -pipe "
script: 14: SB_HOST_LDFLAGS=" -L/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/${SB_PREFIX_CLEAN}/lib"
script: 15: SB_BUILD_CFLAGS="-O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/${SB_PREFIX_CLEAN}/include"
script: 16: SB_BUILD_CXXFLAGS="-O2 -pipe -fbracket-depth=1024 -I/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/${SB_PREFIX_CLEAN}/include"
script: 17: SB_BUILD_LDFLAGS=" -L/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/${SB_PREFIX_CLEAN}/lib"
script: 18: SB_CFLAGS="${SB_BUILD_CFLAGS} "
script: 19: SB_CXXFLAGS="${SB_BUILD_CXXFLAGS} "
script: 20: SB_ARCH="x86_64"
script: 21: SB_OS="freebsd"
script: 22: export SB_SOURCE_DIR SB_BUILD_DIR SB_ARCH SB_OS
script: 23: export SB_HOST_CPPFLAGS SB_HOST_CFLAGS SB_HOST_CXXFLAGS SB_HOST_LDFLAGS
script: 24: export SB_BUILD_CFLAGS SB_BUILD_CXXFLAGS SB_BUILD_LDFLAGS
script: 25: export SB_CFLAGS SB_CXXFLAGS
script: 26: # Documentation
script: 27: SB_DOC_DIR="/build/rtems/tools/5/share/doc"
script: 28: export SB_DOC_DIR
script: 29: # Packages
script: 30: SB_PACKAGE_NAME="rtems-tools-HEAD-1"
script: 31: SB_PACKAGE_BUILDNAME="rtems-tools-HEAD-1"
script: 32: SB_PACKAGE_VERSION="HEAD"
script: 33: SB_PACKAGE_RELEASE="1"
script: 34: export SB_PACKAGE_NAME SB_PACKAGE_VERSION SB_PACKAGE_RELEASE
script: 35: # Build directories
script: 36: export SB_PREFIX
script: 37: SB_BUILD_DIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/rtems-tools-HEAD-1"
script: 38: SB_BUILD_ROOT="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/rtems-tools-HEAD-1-root-chris"
script: 39: SB_BUILD_ROOT_BINDIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/rtems-tools-HEAD-1-root-chris/${SB_PREFIX_CLEAN}/bin"
script: 40: export SB_BUILD_ROOT SB_BUILD_DIR SB_BUILD_ROOT_BINDIR
script: 41: SB_BUILD_CXC_DIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/rtems-tools-HEAD-1-cxc"
script: 42: SB_BUILD_CXC_ROOT="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/rtems-tools-HEAD-1-chris-cxc"
script: 43: SB_BUILD_CXC_ROOT_BINDIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/rtems-tools-HEAD-1-chris-cxc/${SB_PREFIX_CLEAN}/bin"
script: 44: export SB_BUILD_CXC_ROOT SB_BUILD_CXC_DIR SB_BUILD_CXC_ROOT_BINDIR
script: 45: SB_TMPROOT="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset"
script: 46: SB_TMPPREFIX="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/${SB_PREFIX_CLEAN}"
script: 47: SB_TMPBINDIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset/${SB_PREFIX_CLEAN}/bin"
script: 48: export SB_TMPROOT SB_TMPPREFIX SB_TMPBINDIR
script: 49: SB_TMPCXCROOT="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris/5/rtems-i386.bset"
script: 50: SB_TMPCXCPREFIX="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris-cxc/5/rtems-i386.bset/${SB_PREFIX_CLEAN}"
script: 51: SB_TMPCXCBINDIR="/build/rtems/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris-cxc/5/rtems-i386.bset/${SB_PREFIX_CLEAN}/bin"
script: 52: export SB_TMPCXCROOT SB_TMPCXCPREFIX SB_TMPCXCBINDIR
script: 53: # Extra path support
script: 54: SB_EXTRAPATH="/build/rtems/tools/rtems-source-builder.git/source-builder"
script: 55: # The compiler flags
script: 56:
script: 57:
script: 58: export CFLAGS_FOR_TARGET
script: 59: export CXXFLAGS_FOR_TARGET
script: 60: # Set up the path. Put the CXC path first.
script: 61: if test -n "${SB_TMPBINDIR}" ; then
script: 62: PATH="${SB_TMPBINDIR}:$PATH"
script: 63: fi
script: 64: if test -n "${SB_TMPCXCBINDIR}" ; then
script: 65: PATH="${SB_TMPCXCBINDIR}:$PATH"
script: 66: fi
script: 67: if test -n "${SB_EXTRAPATH}" ; then
script: 68: PATH="${SB_EXTRAPATH}:$PATH"
script: 69: fi
script: 70:
script: 71:
script: 72: export PATH
script: 73: # Default environment set up.
script: 74: LANG=C
script: 75: export LANG
script: 76: unset DISPLAY || :
script: 77: umask 022
script: 78: cd "/build/rtems/tools/rtems-source-builder.git/rtems/build/rtems-tools-HEAD-1"
script: 79: echo "=> rtems-tools-HEAD-1:"
script: 80: echo "==> %prep:"
script: 81: build_top=$(pwd)
script: 82: rtems_tools_source="rtems-tools.git"
script: 83: source_dir_rtems_tools=${rtems_tools_source}
source setup: rtems-tools-HEAD-1: source rtems-tools -q -n ${rtems_tools_source}
making dir: /build/rtems/tools/rtems-source-builder.git/rtems/sources/git
git: reset: git://git.rtems.org/rtems-tools.git
git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
error: git command failed (/usr/local/bin/git): 128
See error report: rsb-report-rtems-tools-HEAD-1.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output
======
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd11.1-1
building: autoconf-2.69-x86_64-freebsd11.1-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd11.1-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd11.1-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd11.1-1
building: automake-1.12.6-x86_64-freebsd11.1-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd11.1-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd11.1-1.xml
installing: autoconf-2.69-x86_64-freebsd11.1-1 -> /build/rtems/tools/5
installing: automake-1.12.6-x86_64-freebsd11.1-1 -> /build/rtems/tools/5
cleaning: autoconf-2.69-x86_64-freebsd11.1-1
cleaning: automake-1.12.6-x86_64-freebsd11.1-1
Build Set: Time 0:00:08.481701
Build Set: Time 0:00:13.716065
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd11.1-1
building: expat-2.1.0-x86_64-freebsd11.1-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd11.1-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd11.1-1.xml
config: tools/rtems-binutils-2.29-1.cfg
package: i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1
building: i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1
reporting: tools/rtems-binutils-2.29-1.cfg -> i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1.txt
reporting: tools/rtems-binutils-2.29-1.cfg -> i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1.xml
config: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
package: i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1
building: i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1
reporting: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg -> i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1.txt
reporting: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg -> i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1.xml
config: tools/rtems-gdb-8.0.1-1.cfg
package: i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1
building: i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1
reporting: tools/rtems-gdb-8.0.1-1.cfg -> i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1.txt
reporting: tools/rtems-gdb-8.0.1-1.cfg -> i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-HEAD-1
git: reset: git://git.rtems.org/rtems-tools.git
git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
error: git command failed (/usr/local/bin/git): 128
Build FAILED
See error report: rsb-report-rtems-tools-HEAD-1.txt
error: git command failed (/usr/local/bin/git): 128
config: tools/rtems-kernel-5.cfg
package: i386-rtems5-kernel-5-1
building: i386-rtems5-kernel-5-1
reporting: tools/rtems-kernel-5.cfg -> i386-rtems5-kernel-5-1.txt
reporting: tools/rtems-kernel-5.cfg -> i386-rtems5-kernel-5-1.xml
cleaning: expat-2.1.0-x86_64-freebsd11.1-1
cleaning: i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1
cleaning: i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1
cleaning: i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1
cleaning: i386-rtems5-kernel-5-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 09:58:47 2017
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd11.1-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--verbose \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 09:58:47 2017
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd11.1-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--verbose \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 09:59:18 2017
==============================================================================
Report: tools/rtems-binutils-2.29-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.29-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.29-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1
Config: tools/rtems-binutils-2.29-1.cfg
Summary:
Binutils v2.29 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://sources.redhat.com/binutils
Version:
2.29
Release:
1
Sources: 1
1: ftp://ftp.gnu.org/gnu/binutils/binutils-2.29.tar.bz2
sha512: 8148587d7e4f14ebcbcb3f984b116deaae5d4008228628acde14bc242a64a4b53faf1f6077a2c4ca4750e2f254b698ba506bd657f79e1202e87e7029b0069337
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3091/0001-Fix-Binutils-2.29-PR21884.patch
sha512: 19f31152c3d5df4e1d0bd05316c8418a12790ca75e76d9188ad55aca5cb601a37396132283611ec2843630bdcb82eaeca727faa0a78fd9fd4f752fc0c3b0d3d2
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.29"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd11.1" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--target=i386-rtems5 \
--verbose --disable-nls \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/build/rtems/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 09:59:18 2017
==============================================================================
Report: tools/rtems-binutils-2.29-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.29-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.29-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-binutils-2.29-x86_64-freebsd11.1-1
Config: tools/rtems-binutils-2.29-1.cfg
Summary:
Binutils v2.29 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://sources.redhat.com/binutils
Version:
2.29
Release:
1
Sources: 1
1: ftp://ftp.gnu.org/gnu/binutils/binutils-2.29.tar.bz2
sha512: 8148587d7e4f14ebcbcb3f984b116deaae5d4008228628acde14bc242a64a4b53faf1f6077a2c4ca4750e2f254b698ba506bd657f79e1202e87e7029b0069337
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3091/0001-Fix-Binutils-2.29-PR21884.patch
sha512: 19f31152c3d5df4e1d0bd05316c8418a12790ca75e76d9188ad55aca5cb601a37396132283611ec2843630bdcb82eaeca727faa0a78fd9fd4f752fc0c3b0d3d2
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.29"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd11.1" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--target=i386-rtems5 \
--verbose --disable-nls \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/build/rtems/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/i386-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/i386-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 10:07:04 2017
==============================================================================
Report: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1
Config: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
Summary:
GCC v7.2.0 and Newlib v2.5.0.20170922 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://gcc.gnu.org/
Version:
7.2.0
Release:
1
Sources: 5
1: ftp://sourceware.org/pub/newlib/newlib-2.5.0.20170922.tar.gz
sha512: 5f29509c53d2858c0067e2fe33565a8b8e9decfc2761b3616729a274e7747c120a0b82b2c50aae291b182178da274a1540e218d23b86debd56256e17f3651d4b
2: https://ftp.gnu.org/gnu/gcc/gcc-7.2.0/gcc-7.2.0.tar.xz
sha512: f853cd6530b4055d8d8289da74687cb4c6d5f363598d386332d31852b581bac76c3adb7d61889edec3b779f63d8646f0122840f12965ce4a4389ba535dbbb6e1
3: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
4: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
5: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 2
1: https://devel.rtems.org/raw-attachment/ticket/2514/0001-RTEMS-Self-contained-POSIX-objects.patch
sha512: dbe5e81d30f3ad84cbc1b1e9f76479dafaf2e11f4a32b3d700aec57d0c758aa7723980ddf2ad4c7778db530dcb5412ba0a2e0c40c1631f11fac44b8e60d969e1
2: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=c165a27c0147471977377acd8918ab3b446f947a
No checksum
3: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=ce189d8afef720b0977b5cae7f9eabf5d49b530c
No checksum
4: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
5: https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff_plain;h=62ffbcb7502f0ff88ff7566cd6d7c59c0483ecc0
No checksum
6: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/config.gcc;h=593631849bb5e0df5cc4ff42c1a1cc34b7eec2f8;hp=a9196cd26d9ec24c2e3f6026f63348cae3734861;hb=e840389000b8339a63bee56d8b35c83fa11dea0c;hpb=4bca9835915bbe8a5ec229b04d8d6cf4d8be19a8
No checksum
7: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/config/rs6000/rtems.h;h=7ea9ebdb77b6a9b7060ad2362318e0e12b9058ae;hp=8a62fdcbaf321d616021c4c396619b7f56cf5ed2;hb=e840389000b8339a63bee56d8b35c83fa11dea0c;hpb=4bca9835915bbe8a5ec229b04d8d6cf4d8be19a8
No checksum
Preparation:
build_top=$(pwd)
gcc_source="gcc-7.2.0"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib="newlib-2.5.0.20170922"
%setup source newlib -q -D -n newlib-2.5.0.20170922
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 089327b5dcf944bfc1d8d7f1ad1d30330088da72, Newlib 2.5.0.20170922" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd11.1" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/build/rtems/tools/5 \
--bindir=/build/rtems/tools/5/bin \
--exec_prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include \
--libdir=/build/rtems/tools/5/lib \
--libexecdir=/build/rtems/tools/5/libexec \
--mandir=/build/rtems/tools/5/share/man \
--infodir=/build/rtems/tools/5/share/info \
--datadir=/build/rtems/tools/5/share \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--target=i386-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
--enable-libgomp \
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/bin/i386-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 10:07:04 2017
==============================================================================
Report: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-freebsd11.1-1
Config: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg
Summary:
GCC v7.2.0 and Newlib v2.5.0.20170922 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://gcc.gnu.org/
Version:
7.2.0
Release:
1
Sources: 5
1: ftp://sourceware.org/pub/newlib/newlib-2.5.0.20170922.tar.gz
sha512: 5f29509c53d2858c0067e2fe33565a8b8e9decfc2761b3616729a274e7747c120a0b82b2c50aae291b182178da274a1540e218d23b86debd56256e17f3651d4b
2: https://ftp.gnu.org/gnu/gcc/gcc-7.2.0/gcc-7.2.0.tar.xz
sha512: f853cd6530b4055d8d8289da74687cb4c6d5f363598d386332d31852b581bac76c3adb7d61889edec3b779f63d8646f0122840f12965ce4a4389ba535dbbb6e1
3: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
4: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
5: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 2
1: https://devel.rtems.org/raw-attachment/ticket/2514/0001-RTEMS-Self-contained-POSIX-objects.patch
sha512: dbe5e81d30f3ad84cbc1b1e9f76479dafaf2e11f4a32b3d700aec57d0c758aa7723980ddf2ad4c7778db530dcb5412ba0a2e0c40c1631f11fac44b8e60d969e1
2: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=c165a27c0147471977377acd8918ab3b446f947a
No checksum
3: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=ce189d8afef720b0977b5cae7f9eabf5d49b530c
No checksum
4: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
5: https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff_plain;h=62ffbcb7502f0ff88ff7566cd6d7c59c0483ecc0
No checksum
6: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/config.gcc;h=593631849bb5e0df5cc4ff42c1a1cc34b7eec2f8;hp=a9196cd26d9ec24c2e3f6026f63348cae3734861;hb=e840389000b8339a63bee56d8b35c83fa11dea0c;hpb=4bca9835915bbe8a5ec229b04d8d6cf4d8be19a8
No checksum
7: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/config/rs6000/rtems.h;h=7ea9ebdb77b6a9b7060ad2362318e0e12b9058ae;hp=8a62fdcbaf321d616021c4c396619b7f56cf5ed2;hb=e840389000b8339a63bee56d8b35c83fa11dea0c;hpb=4bca9835915bbe8a5ec229b04d8d6cf4d8be19a8
No checksum
Preparation:
build_top=$(pwd)
gcc_source="gcc-7.2.0"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib="newlib-2.5.0.20170922"
%setup source newlib -q -D -n newlib-2.5.0.20170922
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 089327b5dcf944bfc1d8d7f1ad1d30330088da72, Newlib 2.5.0.20170922" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd11.1" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/build/rtems/tools/5 \
--bindir=/build/rtems/tools/5/bin \
--exec_prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include \
--libdir=/build/rtems/tools/5/lib \
--libexecdir=/build/rtems/tools/5/libexec \
--mandir=/build/rtems/tools/5/share/man \
--infodir=/build/rtems/tools/5/share/info \
--datadir=/build/rtems/tools/5/share \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--target=i386-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
--enable-libgomp \
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/bin/i386-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 10:08:24 2017
==============================================================================
Report: tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.0.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1
Config: tools/rtems-gdb-8.0.1-1.cfg
Summary:
GDB v8.0.1 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://www.gnu.org/software/gdb/
Version:
8.0.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz
sha512: 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1
Patches: 1
1: https://gaisler.org/gdb/gdb-8.0.1-sis-leon2-leon3.diff
sha512: f8aa851f50feb063dd63fc10018ed638c5bd1708b6b9f5d1c1e1030c8d30a24de3506bb233cc5e7e4392ed400448b59f4c71584a22ea28878295d6d87ff79342
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.0.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd11.1" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--target=i386-rtems5 \
--verbose --disable-nls \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--enable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 10:08:24 2017
==============================================================================
Report: tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.0.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-gdb-8.0.1-x86_64-freebsd11.1-1
Config: tools/rtems-gdb-8.0.1-1.cfg
Summary:
GDB v8.0.1 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://www.gnu.org/software/gdb/
Version:
8.0.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz
sha512: 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1
Patches: 1
1: https://gaisler.org/gdb/gdb-8.0.1-sis-leon2-leon3.diff
sha512: f8aa851f50feb063dd63fc10018ed638c5bd1708b6b9f5d1c1e1030c8d30a24de3506bb233cc5e7e4392ed400448b59f4c71584a22ea28878295d6d87ff79342
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.0.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd11.1" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd11.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd11.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
if test "x86_64-freebsd11.1" != "x86_64-freebsd11.1" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-freebsd11.1 --host=x86_64-freebsd11.1 \
--target=i386-rtems5 \
--verbose --disable-nls \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--enable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 10:08:45 2017
==============================================================================
Report: tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-kernel-5.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-kernel-5-1
Config: tools/rtems-kernel-5.cfg
Summary:
RTEMS v5 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://www.rtems.org/
Version:
5
Release:
1
Sources: 0
Patches: 0
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 10:08:45 2017
==============================================================================
Report: tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-kernel-5.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-kernel-5.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-kernel-5-1
Config: tools/rtems-kernel-5.cfg
Summary:
RTEMS v5 for target i386-rtems5 on host x86_64-freebsd11.1
URL:
http://www.rtems.org/
Version:
5
Release:
1
Sources: 0
Patches: 0
More information about the build
mailing list