Build Windows: FAILED 5/rtems-epiphany.bset on x86_64-w64-mingw32 (epiphany-rtems5-gdb-7.8.1-x86_64-w64-mingw32-1)
Chris Johns
chrisj at rtems.org
Fri Nov 10 05:30:23 UTC 2017
RTEMS Source Builder - Set Builder, 5 (089327b5dcf9)
Host: Windows-10-10.0.16299-SP0
Windows weng 10 10.0.16299 AMD64 Intel64 Family 6 Model 42 Stepping 7,
GenuineIntel
Build Time: 0:21:33.056306
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: epiphany-rtems5-gdb-7.8.1-x86_64-w64-mingw32-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
checking whether wcsncmp is declared without a macro... yes
checking whether wcscasecmp is declared without a macro... no
checking whether wcsncasecmp is declared without a macro... no
checking whether wcscoll is declared without a macro... yes
checking whether wcsxfrm is declared without a macro... yes
checking whether wcsdup is declared without a macro... yes
checking whether wcschr is declared without a macro... yes
checking whether wcsrchr is declared without a macro... yes
checking whether wcscspn is declared without a macro... yes
checking whether wcsspn is declared without a macro... yes
checking whether wcspbrk is declared without a macro... yes
checking whether wcsstr is declared without a macro... yes
checking whether wcstok is declared without a macro... yes
checking whether wcswidth is declared without a macro... no
checking whether iswcntrl works... yes
checking for towlower... yes
checking for wctype_t... yes
checking for wctrans_t... yes
checking whether wctype is declared without a macro... yes
checking whether iswctype is declared without a macro... yes
checking whether wctrans is declared without a macro... yes
checking whether towctrans is declared without a macro... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking dependency style of x86_64-w64-mingw32-gcc -O2 -pipe -I/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/5/include... gcc3
checking whether ln -s works... no, using cp -p
checking for x86_64-w64-mingw32-ranlib... ranlib
checking for x86_64-w64-mingw32-ar... ar
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating import/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default commands
checking whether NLS is requested... no
checking whether makeinfo --split-size=5000000 supports @click... yes
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
checking libunwind-ia64.h usability... no
checking libunwind-ia64.h presence... no
checking for libunwind-ia64.h... no
checking for monstartup... no
checking for _mcleanup... no
checking for _etext... no
checking for etext... yes
checking for gawk... gawk
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... no, using cp -p
checking for x86_64-w64-mingw32-ranlib... ranlib
checking for bison... bison -y
checking for x86_64-w64-mingw32-ar... ar
checking for x86_64-w64-mingw32-dlltool... dlltool
checking for x86_64-w64-mingw32-windres... windres
checking for main in -lm... yes
checking for wctype... yes
checking for library containing gethostbyname... no
checking for library containing socketpair... no
checking for library containing dlgetmodinfo... no
checking for iconv... yes
checking for iconv declaration... install-shextern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for library containing waddstr... -lncurses
checking for library containing tgetent... (cached) none required
checking size of unsigned long long... 8
checking size of unsigned long... 4
checking size of unsigned __int128... 16
checking for library containing dlopen... no
checking whether to use expat... yes
checking for ld used by GCC... C:/msys64/mingw64/bin/../lib/gcc/x86_64-w64-mingw32/6.3.0/../../../../x86_64-w64-mingw32/bin/ld.exe
checking if the linker (C:/msys64/mingw64/bin/../lib/gcc/x86_64-w64-mingw32/6.3.0/../../../../x86_64-w64-mingw32/bin/ld.exe) is GNU ld... yes
checking for shared library run path origin... done
checking for libexpat... yes
checking how to link with libexpat... /D/opt/rtems/5/lib/libexpat.a
checking for XML_StopParser... yes
checking whether to use python... yes
checking for python... /mingw64/bin/python
checking for python2.7... yes
checking compiler flags for python code... -fno-strict-aliasing -DNDEBUG -fwrapv
checking whether python supports threads... yes
checking whether to use guile... no
checking for pkg-config... /D/opt/rtems/rsb.git/source-builder/pkg-config
configure: WARNING: guile support disabled; some features will be unavailable.
checking for ANSI C header files... (cached) yes
checking nlist.h usability... no
checking nlist.h presence... no
checking for nlist.h... no
checking machine/reg.h usability... no
checking machine/reg.h presence... no
checking for machine/reg.h... no
checking poll.h usability... no
checking poll.h presence... no
checking for poll.h... no
checking sys/poll.h usability... no
checking sys/poll.h presence... no
checking for sys/poll.h... no
checking proc_service.h usability... no
checking proc_service.h presence... no
checking for proc_service.h... no
checking thread_db.h usability... no
checking thread_db.h presence... no
checking for thread_db.h... no
checking sys/fault.h usability... no
checking sys/fault.h presence... no
checking for sys/fault.h... no
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking sys/filio.h usability... no
checking sys/filio.h presence... no
checking for sys/filio.h... no
checking sys/ioctl.h usability... no
checking sys/ioctl.h presence... no
checking for sys/ioctl.h... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/resource.h usability... no
checking sys/resource.h presence... no
checking for sys/resource.h... no
checking sys/procfs.h usability... no
checking sys/procfs.h presence... no
checking for sys/procfs.h... no
checking sys/ptrace.h usability... no
checking sys/ptrace.h presence... no
checking for sys/ptrace.h... no
checking ptrace.h usability... no
checking ptrace.h presence... no
checking for ptrace.h... no
checking sys/reg.h usability... no
checking sys/reg.h presence... no
checking for sys/reg.h... no
checking sys/debugreg.h usability... no
checking sys/debugreg.h presence... no
checking for sys/debugreg.h... no
checking sys/select.h usability... no
checking sys/select.h presence... no
checking for sys/select.h... no
checking sys/syscall.h usability... no
checking sys/syscall.h presence... no
checking for sys/syscall.h... no
checking termios.h usability... no
checking termios.h presence... no
checking for termios.h... no
checking termio.h usability... no
checking termio.h presence... no
checking for termio.h... no
checking sgtty.h usability... no
checking sgtty.h presence... no
checking for sgtty.h... no
checking elf_hp.h usability... no
checking elf_hp.h presence... no
checking for elf_hp.h... no
checking dlfcn.h usability... no
checking dlfcn.h presence... no
checking for dlfcn.h... no
checking for sys/proc.h... no
checking for sys/user.h... no
checking curses.h usability... no
checking curses.h presence... no
checking for curses.h... no
checking cursesX.h usability... no
checking cursesX.h presence... no
checking for cursesX.h... no
checking ncurses.h usability... no
checking ncurses.h presence... no
checking for ncurses.h... no
checking ncurses/ncurses.h usability... yes
checking ncurses/ncurses.h presence... yes
checking for ncurses/ncurses.h... yes
checking ncurses/term.h usability... yes
checking ncurses/term.h presence... yes
checking for ncurses/term.h... yes
checking for term.h... no
checking whether free is declared... yes
checking whether malloc is declared... yes
checking whether realloc is declared... yes
checking whether snprintf is declared... yes
checking for LC_MESSAGES... no
checking for struct stat.st_blocks... no
checking for struct stat.st_blksize... no
checking return type of signal handlers... void
checking for socklen_t... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether byte ordering is bigendian... no
checking for working alloca.h... no
checking for alloca... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... no
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... no
checking for vfork... no
checking for canonicalize_file_name... no
checking for realpath... no
checking for getrusage... no
checking for getuid... no
checking for getgid... no
checking for pipe... no
checking for poll... no
checking for pread... no
checking for pread64... no
checking for pwrite... no
checking for readlink... no
checking for resize_term... yes
checking for sbrk... no
checking for setpgid... no
checking for setpgrp... no
checking for setsid... no
checking for sigaction... no
checking for sigprocmask... no
checking for sigsetmask... no
checking for socketpair... no
checking for ttrace... no
checking for wborder... yes
checking for wresize... yes
checking for setlocale... yes
checking for iconvlist... no
checking for libiconvlist... yes
checking for btowc... yes
checking for setrlimit... no
checking for getrlimit... no
checking for posix_madvise... no
checking for waitpid... no
checking for lstat... no
checking for ptrace64... no
checking for nl_langinfo and CODESET... no
checking for ANSI C header files... (cached) yes
checking for working alloca.h... (cached) no
checking for alloca... (cached) yes
checking for nl_langinfo and CODESET... (cached) no
checking linux/perf_event.h usability... no
checking linux/perf_event.h presence... no
checking for linux/perf_event.h... no
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for memory.h... (cached) yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for sys/resource.h... (cached) no
checking sys/socket.h usability... no
checking sys/socket.h presence... no
checking for sys/socket.h... no
checking for sys/syscall.h... (cached) no
checking sys/un.h usability... no
checking sys/un.h presence... no
checking for sys/un.h... no
checking sys/wait.h usability... no
checking sys/wait.h presence... no
checking for sys/wait.h... no
checking for thread_db.h... (cached) no
checking wait.h usability... no
checking wait.h presence... no
checking for wait.h... no
checking for fdwalk... no
checking for getrlimit... (cached) no
checking for pipe... (cached) no
checking for pipe2... no
checking for socketpair... (cached) no
checking whether strerror is declared... yes
checking whether strstr is declared... yes
checking whether ptrace is declared... no
checking return type of ptrace... (cached) int
checking types of arguments for ptrace... (cached) int,int,long,long
checking whether setpgrp takes no argument... yes
checking for sigsetjmp... no
checking for GNU regex... no
checking for struct thread.td_pcb... no
checking for struct lwp... no
checking for struct reg in machine/reg.h... no
checking for struct reg.r_fs... no
checking for struct reg.r_gs... no
checking for struct user_regs_struct.fs_base... no
checking for struct user_regs_struct.gs_base... no
checking for PTRACE_GETREGS... no
checking for PTRACE_GETFPXREGS... no
checking for PT_GETDBREGS... no
checking for PT_GETXMMREGS... no
checking for long long support in compiler... yes
checking for long long support in printf... yes
checking for decfloat support in printf... no
checking for long double support in compiler... yes
checking for long double support in printf... no
checking for long double support in scanf... no
checking for the dynamic export flag... -rdynamic
checking whether ADDR_NO_RANDOMIZE is declared... no
checking compiler warning flags... -Wall -Wdeclaration-after-statement -Wpointer-arith -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wno-format
checking for cygwin... no
checking for ELF support in BFD... yes
checking for Mach-O support in BFD... no
checking for SOM support in BFD... no
checking whether to use lzma... auto
checking for liblzma... yes
checking how to link with liblzma... -llzma
checking for X... no
enable_sim = yes
enableval = yes
checking whether to use babeltrace... auto
checking for libbabeltrace... no
configure: WARNING: babeltrace is missing or unusable; GDB is unable to read CTF data.
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating jit-reader.h
config.status: creating gcore
config.status: creating Makefile
config.status: creating gdb-gdb.gdb
config.status: creating doc/Makefile
config.status: creating data-directory/Makefile
config.status: creating config.h
config.status: executing depdir commands
mkdir -p -- .deps
config.status: executing default commands
=== configuring in testsuite (/D/opt/rtems/rsb.git/rtems/build/erg7xwm1/build/gdb/testsuite)
configure: running /bin/sh ../../../epiphany-binutils-gdb-f05996c7c42e6b2781946acbab153a481ce3fd0b/gdb/testsuite/configure --disable-option-checking '--prefix=/D/opt/rtems/5' '--with-gnu-as' '--with-gnu-ld' '--with-system-zlib' '--verbose' '--disable-nls' '--with-system-readline' '--without-included-gettext' '--disable-win32-registry' '--disable-werror' '--enable-sim' '--without-zlib' '--with-expat' '--with-guile=no' '--with-python' '--bindir=/D/opt/rtems/5/bin' '--exec-prefix=/D/opt/rtems/5' '--includedir=/D/opt/rtems/5/include' '--libdir=/D/opt/rtems/5/lib' '--mandir=/D/opt/rtems/5/share/man' '--infodir=/D/opt/rtems/5/share/info' '--program-transform-name=s&^&epiphany-rtems5-&' '--build=x86_64-w64-mingw32' '--host=x86_64-w64-mingw32' '--target=epiphany-rtems5' 'build_alias=x86_64-w64-mingw32' 'host_alias=x86_64-w64-mingw32' 'target_alias=epiphany-rtems5' 'CC=x86_64-w64-mingw32-gcc -O2 -pipe -I/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/!
5/include' 'CFLAGS=-g -O2 -D__USE_MINGW_ACCESS' 'LDFLAGS=-static-libstdc++ -static-libgcc -L/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/5/lib -Wl,--stack,12582912' 'MAKEINFO=makeinfo --split-size=5000000' 'YACC=bison -y' --cache-file=.././config.cache --srcdir=../../../epiphany-binutils-gdb-f05996c7c42e6b2781946acbab153a481ce3fd0b/gdb/testsuite
configure: loading site script C:/msys64/mingw64/etc/config.site
configure: loading cache .././config.cache
checking build system type... (cached) x86_64-w64-mingw32
checking host system type... (cached) x86_64-w64-mingw32
checking target system type... (cached) epiphany-unknown-rtems5
checking for make... (cached) make
checking whether make sets $(MAKE)... (cached) yes
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc -O2 -pipe -I/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/5/include
checking for C compiler default output file name... a.exe
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... (cached) o
checking whether we are using the GNU C compiler... (cached) yes
checking whether x86_64-w64-mingw32-gcc -O2 -pipe -I/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/5/include accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc -O2 -pipe -I/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/5/include option to accept ISO C89... (cached) none needed
checking how to run the C preprocessor... (cached) x86_64-w64-mingw32-gcc -O2 -pipe -I/D/opt/rtems/rsb.git/rtems/build/tmp/sb-chris/5/rtems-epiphany.bset/D/opt/rtems/5/include -E
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/grep -E
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
configure: updating cache .././config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating gdb.ada/Makefile
config.status: creating gdb.arch/Makefile
config.status: creating gdb.asm/Makefile
config.status: creating gdb.base/Makefile
config.status: creating gdb.btrace/Makefile
config.status: creating gdb.cell/Makefile
config.status: creating gdb.cp/Makefile
config.status: creating gdb.disasm/Makefile
config.status: creating gdb.dwarf2/Makefile
config.status: creating gdb.dlang/Makefile
config.status: creating gdb.fortran/Makefile
config.status: creating gdb.gdb/Makefile
config.status: creating gdb.go/Makefile
config.status: creating gdb.server/Makefile
config.status: creating gdb.java/Makefile
config.status: creating gdb.hp/Makefile
config.status: creating gdb.hp/gdb.objdbg/Makefile
config.status: creating gdb.hp/gdb.base-hp/Makefile
config.status: creating gdb.hp/gdb.aCC/Makefile
config.status: creating gdb.hp/gdb.compat/Makefile
config.status: creating gdb.hp/gdb.defects/Makefile
config.status: creating gdb.guile/Makefile
config.status: creating gdb.linespec/Makefile
config.status: creating gdb.mi/Makefile
config.status: creating gdb.modula2/Makefile
config.status: creating gdb.multi/Makefile
config.status: creating gdb.objc/Makefile
config.status: creating gdb.opencl/Makefile
config.status: creating gdb.opt/Makefile
config.status: creating gdb.pascal/Makefile
config.status: creating gdb.perf/Makefile
config.status: creating gdb.python/Makefile
config.status: creating gdb.reverse/Makefile
config.status: creating gdb.stabs/Makefile
config.status: creating gdb.threads/Makefile
config.status: creating gdb.trace/Makefile
config.status: creating gdb.xml/Makefile
make[1]: Leaving directory '/D/opt/rtems/rsb.git/rtems/build/erg7xwm1/build'
make: *** [Makefile:840: all] Error 2
shell cmd failed: sh -ex /D/opt/rtems/rsb.git/rtems/build/erg7xwm1/doit
error: building erg7xwm1
See error report: rsb-report-epiphany-rtems5-gdb-7.8.1-x86_64-w64-mingw32-1.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output
======
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-w64-mingw32-1
building: autoconf-2.69-x86_64-w64-mingw32-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-w64-mingw32-1
building: automake-1.12.6-x86_64-w64-mingw32-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.xml
installing: autoconf-2.69-x86_64-w64-mingw32-1 -> D:\opt\rtems\5
installing: automake-1.12.6-x86_64-w64-mingw32-1 -> D:\opt\rtems\5
cleaning: autoconf-2.69-x86_64-w64-mingw32-1
cleaning: automake-1.12.6-x86_64-w64-mingw32-1
Build Set: Time 0:00:30.110934
Build Set: Time 0:00:54.471565
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-w64-mingw32-1
building: expat-2.1.0-x86_64-w64-mingw32-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.xml
config: tools/rtems-binutils-2.23.1-1.cfg
package: epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1
warning: b6c483b4a98424731e6e44558cb4b9863751fb1b.zip: no hash found
building: epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1
reporting: tools/rtems-binutils-2.23.1-1.cfg -> epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-binutils-2.23.1-1.cfg -> epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1.xml
config: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
package: epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1
building: epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1
reporting: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg -> epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg -> epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1.xml
config: tools/rtems-gdb-7.8.1-1.cfg
package: epiphany-rtems5-gdb-7.8.1-x86_64-w64-mingw32-1
building: epiphany-rtems5-gdb-7.8.1-x86_64-w64-mingw32-1
error: building erg7xwm1
Build FAILED
See error report: rsb-report-epiphany-rtems5-gdb-7.8.1-x86_64-w64-mingw32-1.txt
error: building erg7xwm1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-HEAD-1
git: reset: git://git.rtems.org/rtems-tools.git
git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: checkout: git://git.rtems.org/rtems-tools.git => HEAD
git: pull: git://git.rtems.org/rtems-tools.git
building: rtems-tools-HEAD-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-HEAD-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-HEAD-1.xml
cleaning: expat-2.1.0-x86_64-w64-mingw32-1
cleaning: epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1
cleaning: epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1
cleaning: rtems-tools-HEAD-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:10:03 2017
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-w64-mingw32-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target epiphany-rtems5 on host x86_64-w64-mingw32
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross build
CC=$(echo "x86_64-w64-mingw32-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 \
--verbose \
--prefix=/D/opt/rtems/5 --bindir=/D/opt/rtems/5/bin \
--exec-prefix=/D/opt/rtems/5 \
--includedir=/D/opt/rtems/5/include --libdir=/D/opt/rtems/5/lib \
--mandir=/D/opt/rtems/5/share/man --infodir=/D/opt/rtems/5/share/info
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:10:03 2017
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-w64-mingw32-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target epiphany-rtems5 on host x86_64-w64-mingw32
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross build
CC=$(echo "x86_64-w64-mingw32-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 \
--verbose \
--prefix=/D/opt/rtems/5 --bindir=/D/opt/rtems/5/bin \
--exec-prefix=/D/opt/rtems/5 \
--includedir=/D/opt/rtems/5/include --libdir=/D/opt/rtems/5/lib \
--mandir=/D/opt/rtems/5/share/man --infodir=/D/opt/rtems/5/share/info
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:12:14 2017
==============================================================================
Report: tools/rtems-binutils-2.23.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.23.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.23.1-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1
Config: tools/rtems-binutils-2.23.1-1.cfg
Summary:
Binutils v2.23.1 for target epiphany-rtems5 on host x86_64-w64-mingw32
URL:
http://sources.redhat.com/binutils
Version:
2.23.1
Release:
1
Sources: 1
1: https://github.com/adapteva/epiphany-binutils-gdb/archive/b6c483b4a98424731e6e44558cb4b9863751fb1b.zip
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=epiphany-binutils-gdb-b6c483b4a98424731e6e44558cb4b9863751fb1b
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-w64-mingw32" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross build
CC=$(echo "x86_64-w64-mingw32-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 \
--target=epiphany-rtems5 \
--verbose --disable-nls \
--enable-deterministic-archives \
\
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/D/opt/rtems/5 --bindir=/D/opt/rtems/5/bin \
--exec-prefix=/D/opt/rtems/5 \
--includedir=/D/opt/rtems/5/include --libdir=/D/opt/rtems/5/lib \
--mandir=/D/opt/rtems/5/share/man --infodir=/D/opt/rtems/5/share/info
make -j 8 all
cd ${build_top}
Install:
cd ${build_top}
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/D/opt/rtems/5/share/info/configure.info*
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/D/opt/rtems/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/D/opt/rtems/5/share/locale
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-dlltool; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-nlmconv; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-windres; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-windmc; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:12:15 2017
==============================================================================
Report: tools/rtems-binutils-2.23.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.23.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.23.1-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-binutils-2.23.1-x86_64-w64-mingw32-1
Config: tools/rtems-binutils-2.23.1-1.cfg
Summary:
Binutils v2.23.1 for target epiphany-rtems5 on host x86_64-w64-mingw32
URL:
http://sources.redhat.com/binutils
Version:
2.23.1
Release:
1
Sources: 1
1: https://github.com/adapteva/epiphany-binutils-gdb/archive/b6c483b4a98424731e6e44558cb4b9863751fb1b.zip
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=epiphany-binutils-gdb-b6c483b4a98424731e6e44558cb4b9863751fb1b
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-w64-mingw32" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross build
CC=$(echo "x86_64-w64-mingw32-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 \
--target=epiphany-rtems5 \
--verbose --disable-nls \
--enable-deterministic-archives \
\
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/D/opt/rtems/5 --bindir=/D/opt/rtems/5/bin \
--exec-prefix=/D/opt/rtems/5 \
--includedir=/D/opt/rtems/5/include --libdir=/D/opt/rtems/5/lib \
--mandir=/D/opt/rtems/5/share/man --infodir=/D/opt/rtems/5/share/info
make -j 8 all
cd ${build_top}
Install:
cd ${build_top}
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/D/opt/rtems/5/share/info/configure.info*
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/D/opt/rtems/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/D/opt/rtems/5/share/locale
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-dlltool; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-nlmconv; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-windres; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/D/opt/rtems/5/bin/epiphany-rtems5-windmc; then
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/share/man/man1/epiphany-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:24:34 2017
==============================================================================
Report: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1
Config: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
Summary:
GCC v4.9.2 and Newlib v2.5.0.20170922 for target epiphany-rtems5 on host x86_64-w64-mingw32
URL:
http://gcc.gnu.org/
Version:
4.9.2
Release:
1
Sources: 5
1: ftp://sourceware.org/pub/newlib/newlib-2.5.0.20170922.tar.gz
sha512: 5f29509c53d2858c0067e2fe33565a8b8e9decfc2761b3616729a274e7747c120a0b82b2c50aae291b182178da274a1540e218d23b86debd56256e17f3651d4b
2: https://github.com/adapteva/epiphany-gcc/archive/f7051762470c42ce7f01baa7edeb113d51c7dd72.zip
sha512: ae26ec61f90978dec724234a6c89d63a0a1437c0d9dcc2d81462199e96daa557feef0f3655b3782ea4be0b90957e677ba835e6c22166ff80e9e322307450ef3e
3: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2
sha256: 1f588aaccc41bb9aed946f9fe38521c26d8b290d003c5df807f65690f2aadec9
4: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz
sha256: ae79f8d41d8a86456b68607e9ca398d00f8b7342d1d83bcf4428178ac45380c7
5: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2
sha256: e1977099bb494319c0f0c1f85759050c418a56884e9c6cef1c540b9b13e38e7f
Patches: 2
1: https://devel.rtems.org/raw-attachment/ticket/2514/0001-RTEMS-Self-contained-POSIX-objects.patch
sha512: dbe5e81d30f3ad84cbc1b1e9f76479dafaf2e11f4a32b3d700aec57d0c758aa7723980ddf2ad4c7778db530dcb5412ba0a2e0c40c1631f11fac44b8e60d969e1
2: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=c165a27c0147471977377acd8918ab3b446f947a
No checksum
3: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=ce189d8afef720b0977b5cae7f9eabf5d49b530c
No checksum
4: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/Make-lang.in;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
5: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.gperf;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
6: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.h;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
7: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/except.c;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
Preparation:
build_top=$(pwd)
gcc_source=epiphany-gcc-f7051762470c42ce7f01baa7edeb113d51c7dd72
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib="newlib-2.5.0.20170922"
%setup source newlib -q -D -n newlib-2.5.0.20170922
%setup patch newlib -p1
cd ${build_top}
rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_mpfr="mpfr-3.0.1"
%setup source mpfr -q -D -n mpfr-3.0.1
%setup patch mpfr -p1
cd ${build_top}
rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-0.8.2"
%setup source mpc -q -D -n mpc-0.8.2
%setup patch mpc -p1
cd ${build_top}
rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-5.0.5"
%setup source gmp -q -D -n gmp-5.0.5
%setup patch gmp -p1
cd ${build_top}
rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 089327b5dcf944bfc1d8d7f1ad1d30330088da72, Newlib 2.5.0.20170922" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-w64-mingw32" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross build
CC=$(echo "x86_64-w64-mingw32-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/D/opt/rtems/5 \
--bindir=/D/opt/rtems/5/bin \
--exec_prefix=/D/opt/rtems/5 \
--includedir=/D/opt/rtems/5/include \
--libdir=/D/opt/rtems/5/lib \
--libexecdir=/D/opt/rtems/5/libexec \
--mandir=/D/opt/rtems/5/share/man \
--infodir=/D/opt/rtems/5/share/info \
--datadir=/D/opt/rtems/5/share \
--build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 \
--target=epiphany-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
\
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/lib/libiberty.a
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/bin/epiphany-rtems5-c++filt
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/share/info/dir
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/share/man/man3/*ffi*
rm -rf ${source_dir_gcc}/newlib
rm -rf ${source_dir_gcc}/mpfr
rm -rf ${source_dir_gcc}/mpc
rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:24:36 2017
==============================================================================
Report: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gcc-4.9.2-newlib-2.5.0.20170922-x86_64-w64-mingw32-1
Config: tools/rtems-gcc-4.9.2-newlib-2.5.0.20170922-1.cfg
Summary:
GCC v4.9.2 and Newlib v2.5.0.20170922 for target epiphany-rtems5 on host x86_64-w64-mingw32
URL:
http://gcc.gnu.org/
Version:
4.9.2
Release:
1
Sources: 5
1: ftp://sourceware.org/pub/newlib/newlib-2.5.0.20170922.tar.gz
sha512: 5f29509c53d2858c0067e2fe33565a8b8e9decfc2761b3616729a274e7747c120a0b82b2c50aae291b182178da274a1540e218d23b86debd56256e17f3651d4b
2: https://github.com/adapteva/epiphany-gcc/archive/f7051762470c42ce7f01baa7edeb113d51c7dd72.zip
sha512: ae26ec61f90978dec724234a6c89d63a0a1437c0d9dcc2d81462199e96daa557feef0f3655b3782ea4be0b90957e677ba835e6c22166ff80e9e322307450ef3e
3: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2
sha256: 1f588aaccc41bb9aed946f9fe38521c26d8b290d003c5df807f65690f2aadec9
4: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz
sha256: ae79f8d41d8a86456b68607e9ca398d00f8b7342d1d83bcf4428178ac45380c7
5: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2
sha256: e1977099bb494319c0f0c1f85759050c418a56884e9c6cef1c540b9b13e38e7f
Patches: 2
1: https://devel.rtems.org/raw-attachment/ticket/2514/0001-RTEMS-Self-contained-POSIX-objects.patch
sha512: dbe5e81d30f3ad84cbc1b1e9f76479dafaf2e11f4a32b3d700aec57d0c758aa7723980ddf2ad4c7778db530dcb5412ba0a2e0c40c1631f11fac44b8e60d969e1
2: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=c165a27c0147471977377acd8918ab3b446f947a
No checksum
3: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=ce189d8afef720b0977b5cae7f9eabf5d49b530c
No checksum
4: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/Make-lang.in;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
5: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.gperf;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
6: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.h;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
7: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/except.c;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
Preparation:
build_top=$(pwd)
gcc_source=epiphany-gcc-f7051762470c42ce7f01baa7edeb113d51c7dd72
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib="newlib-2.5.0.20170922"
%setup source newlib -q -D -n newlib-2.5.0.20170922
%setup patch newlib -p1
cd ${build_top}
rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_mpfr="mpfr-3.0.1"
%setup source mpfr -q -D -n mpfr-3.0.1
%setup patch mpfr -p1
cd ${build_top}
rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-0.8.2"
%setup source mpc -q -D -n mpc-0.8.2
%setup patch mpc -p1
cd ${build_top}
rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-5.0.5"
%setup source gmp -q -D -n gmp-5.0.5
%setup patch gmp -p1
cd ${build_top}
rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 089327b5dcf944bfc1d8d7f1ad1d30330088da72, Newlib 2.5.0.20170922" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-w64-mingw32" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
# Cross build
CC=$(echo "x86_64-w64-mingw32-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "x86_64-w64-mingw32-gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-w64-mingw32-g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/D/opt/rtems/5 \
--bindir=/D/opt/rtems/5/bin \
--exec_prefix=/D/opt/rtems/5 \
--includedir=/D/opt/rtems/5/include \
--libdir=/D/opt/rtems/5/lib \
--libexecdir=/D/opt/rtems/5/libexec \
--mandir=/D/opt/rtems/5/share/man \
--infodir=/D/opt/rtems/5/share/info \
--datadir=/D/opt/rtems/5/share \
--build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 \
--target=epiphany-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
\
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
rm -f ${SB_BUILD_ROOT}/D/opt/rtems/5/lib/libiberty.a
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/bin/epiphany-rtems5-c++filt
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/share/info/dir
rm -f $SB_BUILD_ROOT/D/opt/rtems/5/share/man/man3/*ffi*
rm -rf ${source_dir_gcc}/newlib
rm -rf ${source_dir_gcc}/mpfr
rm -rf ${source_dir_gcc}/mpc
rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:29:52 2017
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-HEAD-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools HEAD for host x86_64-w64-mingw32
URL:
http://www.rtems.org/
Version:
HEAD
Release:
1
Sources: 1
1: git://git.rtems.org/rtems-tools.git?reset=hard?fetch?branch=HEAD?pull
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source="rtems-tools.git"
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
RT_HOST="-host=x86_64-w64-mingw32"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/D/opt/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT$(echo /D/opt/rtems/5 | cut -c 1-2)
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT_WAF install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 10 16:29:53 2017
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 089327b5dcf944bfc1d8d7f1ad1d30330088da72
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-HEAD-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools HEAD for host x86_64-w64-mingw32
URL:
http://www.rtems.org/
Version:
HEAD
Release:
1
Sources: 1
1: git://git.rtems.org/rtems-tools.git?reset=hard?fetch?branch=HEAD?pull
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source="rtems-tools.git"
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-w64-mingw32" != "x86_64-w64-mingw32" ; then
RT_HOST="-host=x86_64-w64-mingw32"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/D/opt/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT$(echo /D/opt/rtems/5 | cut -c 1-2)
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT_WAF install
cd ${build_top}
More information about the build
mailing list