[rtems-test] arm/imx7: Passed:614 Failed:1 Timeout:0 Invalid:1
sebastian.huber at embedded-brains.de
sebastian.huber at embedded-brains.de
Fri Nov 10 10:58:11 UTC 2017
Testing time : 1:20:45.265673
Average test time: 0:00:07.764848
Host
====
Linux-4.4.92-18.36-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.92-18.36-default #1 SMP Tue Oct 24 15:20:18 UTC 2017 (3f3cfaa) x86_64 x86_64)
Summary
=======
Passed: 614
Failed: 1
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
------------------
Total: 624
Failures:
debugger01.exe
User Input:
termios.exe
monitor.exe
capture.exe
top.exe
fileio.exe
Benchmark:
whetstone.exe
linpack.exe
dhrystone.exe
Invalid:
spclock_err02.exe
Log
===
RTEMS Testing - Tester, 5.not_released
Command Line: /build/rtems-5/bin/rtems-test --rtems-bsp=imx7 --rtems-tools=/build/rtems-5 --user-config=/home/EB/sebastian_h/.rtemstesterrc --debug-trace=output --log=l.txt --mail .
Python: 2.7.13 (default, Mar 22 2017, 12:31:17) [GCC]
Host: Linux-4.4.92-18.36-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.92-18.36-default #1 SMP Tue Oct 24 15:20:18 UTC 2017 (3f3cfaa) x86_64 x86_64)
[ 1/624] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | arm/imx7: dhrystone.exe
<<skipping passes>>
[ 82/624] p:78 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/imx7: debugger01.exe
Result: failed Time: 0:00:14.018139 debugger01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/imx7/testsuites/libtests/debugger01/debugger01.exe.img
] .... done
=> tftp: ./arm-rtems5/c/imx7/testsuites/libtests/debugger01/debugger01.exe.img
] Using FEC0 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x82000000
] Loading: *#####
] 7.7 MiB/s
] done
] Bytes transferred = 72630 (11bb6 hex)
] reading imx7d-mba7.dtb
] 44573 bytes read in 21 ms (2 MiB/s)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-11-10 9:37:06 UTC
] Image Type: ARM Linux Kernel Image (gzip compressed)
] Data Size: 72566 Bytes = 70.9 KiB
] Load Address: 80200000
] Entry Point: 80200000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 88000000
] Booting using the fdt blob at 0x88000000
] Uncompressing Kernel Image ... OK
] Using Device Tree in place at 88000000, end 8800de1c
]
] Starting kernel ...
]
]
]
]
=> test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v5.5) ARMv7 [v7.1] breakpoints:5 watchpoints:3
] [CPU:0] rtems-db: arm debug: cannot enter monitor mode
]
] U-Boot 2016.03.rel_imx_4.1.15_2.0.0_ga-20170202 (Mar 20 2017 - 12:28:09 +0100)
]
] CPU: Freescale i.MX7D rev1.2 996 MHz (running at 792 MHz)
] CPU: Extended Commercial temperature grade (-20C to 105C) at 40C
] Reset cause: POR
] Board: TQMa7D on a MBa7
] DRAM: 512 MiB
] PMIC: PFUZE3000 ID=0x30 REV=0x11
] MMC: FSL_SDHC: 0, FSL_SDHC: 1
] In: serial
] Out: serial
] Err: serial
] TQMa7 EEPROM:
] ID: TQMa7D-AA.0101
] SN: 70795961
] MAC: 00:d0:93:3d:ea:ed
] Boot: USDHC1(SD)
] Net: FEC0, FEC1
] Normal Boot
] Hit any key to stop autoboot: 1 0
] FEC0 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Using FEC0 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x82000000
=> tftp: re-requesting exe; target must have reset
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] resetting ...
]
]
] U-Boot 2016.03.rel_imx_4.1.15_2.0.0_ga-20170202 (Mar 20 2017 - 12:28:09 +0100)
]
] CPU: Freescale i.MX7D rev1.2 996 MHz (running at 792 MHz)
] CPU: Extended Commercial temperature grade (-20C to 105C) at 40C
] Reset cause: POR
] Board: TQMa7D on a MBa7
] DRAM: 512 MiB
] PMIC: PFUZE3000 ID=0x30 REV=0x11
] MMC: FSL_SDHC: 0, FSL_SDHC: 1
] In: serial
] Out: serial
] Err: serial
] TQMa7 EEPROM:
] ID: TQMa7D-AA.0101
] SN: 70795961
] MAC: 00:d0:93:3d:ea:ed
] Boot: USDHC1(SD)
] Net: FEC0, FEC1
] Normal Boot
[ 83/624] p:78 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/imx7: defaultconfig01.exe
<<skipping passes>>
[449/624] p:439 f:1 u:5 e:0 I:0 B:3 t:0 i:0 | arm/imx7: spclock_err02.exe
Result: invalid Time: 0:00:10.521121 spclock_err02.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/imx7/testsuites/sptests/spclock_err02/spclock_err02.exe.img
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] Port already in use
=> tftp: ./arm-rtems5/c/imx7/testsuites/sptests/spclock_err02/spclock_err02.exe.img
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] Port already in use
] TA1 - rtems_clock_get_tod - 00:00:00 01/01/2001 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/1999 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 00:00:00 01/01/2000 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/2100 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 00:00:00 01/01/2101 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/2099 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 00:00:00 01/01/2100 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/1991 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 00:00:00 01/01/1992 - RTEMS_SUCCESSFUL
]
=> test end: None
] *** END OF TEST SPCLOCK_ERR 2 ***
]
]
] U-Boot 2016.03.rel_imx_4.1.15_2.0.0_ga-20170202 (Mar 20 2017 - 12:28:09 +0100)
]
] CPU: Freescale i.MX7D rev1.2 996 MHz (running at 792 MHz)
] CPU: Extended Commercial temperature grade (-20C to 105C) at 42C
] Reset cause: POR
] Board: TQMa7D on a MBa7
] DRAM: 512 MiB
] PMIC: PFUZE3000 ID=0x30 REV=0x11
] MMC: FSL_SDHC: 0, FSL_SDHC: 1
] In: serial
] Out: serial
] Err: serial
] TQMa7 EEPROM:
] ID: TQMa7D-AA.0101
] SN: 70795961
] MAC: 00:d0:93:3d:ea:ed
] Boot: USDHC1(SD)
] Net: FEC0, FEC1
] Normal Boot
] Hit any key to stop autoboot: 1 0
] FEC0 Waiting for PHY auto negotiation to complete.... done
=> tftp: re-requesting exe; target must have reset
] Using FEC0 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] resetting ...
]
]
] U-Boot 2016.03.rel_imx_4.1.15_2.0.0_ga-20170202 (Mar 20 2017 - 12:28:09 +0100)
]
] CPU: Freescale i.MX7D rev1.2 996 MHz (running at 792 MHz)
] CPU: Extended Commercial temperature grade (-20C to 105C) at 42C
] Reset cause: POR
] Board: TQMa7D on a MBa7
] DRAM: 512 MiB
] PMIC: PFUZE3000 ID=0x30 REV=0x11
] MMC: FSL_SDHC: 0, FSL_SDHC: 1
] In: serial
] Out: serial
] Err: serial
] TQMa7 EEPROM:
] ID: TQMa7D-AA.0101
] SN: 70795961
] MAC: 00:d0:93:3d:ea:ed
] Boot: USDHC1(SD)
] Net: FEC0, FEC1
] Normal Boot
[450/624] p:439 f:1 u:5 e:0 I:0 B:3 t:0 i:1 | arm/imx7: spconsole01.exe
<<skipping passes>>
[624/624] p:613 f:1 u:5 e:0 I:0 B:3 t:0 i:1 | arm/imx7: tmtimer01.exe
Passed: 614
Failed: 1
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
------------------
Total: 624
Failures:
debugger01.exe
User Input:
termios.exe
monitor.exe
capture.exe
top.exe
fileio.exe
Benchmark:
whetstone.exe
linpack.exe
dhrystone.exe
Invalid:
spclock_err02.exe
Average test time: 0:00:07.764848
Testing time : 1:20:45.265673
More information about the build
mailing list