[rtems-test] powerpc/qoriq_e6500_32: smp, legacy-net: Passed:599 Failed:12 Timeout:0 Invalid:1 Wrong:0
sebastian.huber at embedded-brains.de
sebastian.huber at embedded-brains.de
Wed Nov 22 12:52:01 UTC 2017
Testing time : 1:54:00.060443
Average test time: 0:00:11.032355
Host
====
Linux-4.4.92-18.36-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.92-18.36-default #1 SMP Tue Oct 24 15:20:18 UTC 2017 (3f3cfaa) x86_64 x86_64)
Configuration
=============
Version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
Build : smp,legacy-net
Tools : 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
Summary
=======
Passed: 599
Failed: 12
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 620
Failures:
spintrcritical01.exe
spintrcritical10.exe
spintrcritical04.exe
spintrcritical24.exe
spintrcritical23.exe
block08.exe
spintrcritical03.exe
spintrcritical20.exe
spintrcritical16.exe
spintrcritical05.exe
spintrcritical22.exe
spintrcritical21.exe
User Input:
fileio.exe
capture.exe
top.exe
monitor.exe
termios.exe
Benchmark:
whetstone.exe
linpack.exe
dhrystone.exe
Invalid:
block09.exe
Log
===
RTEMS Testing - Tester, 5.not_released
Command Line: /build/rtems/5/bin/rtems-test --rtems-bsp=qoriq_e6500_32 --rtems-tools=/build/rtems/5 --user-config=/home/EB/sebastian_h/.rtemstesterrc --debug-trace=output --log=l.txt --mail .
Python: 2.7.13 (default, Mar 22 2017, 12:31:17) [GCC]
Host: Linux-4.4.92-18.36-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.92-18.36-default #1 SMP Tue Oct 24 15:20:18 UTC 2017 (3f3cfaa) x86_64 x86_64)
[ 1/620] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_32: dhrystone.exe
<<skipping passes>>
[ 67/620] p:63 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/qoriq_e6500_32: block08.exe
Result: failed Time: 0:00:47.589143 block08.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/libtests/block08/block08.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/libtests/block08/block08.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 17 ms (1.9 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#########
] 4.8 MiB/s
] done
] Bytes transferred = 85430 (14db6 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 85366 Bytes = 83.4 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: BLOCK 8
] *** BEGIN OF TEST BLOCK 8 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] test_disk_ioctl() Unexpected request comes 536887816
] TEST DISK - OK
] DEV: /dev/testdisk [1024]
] Test 1.1 - STARTED
] Thread #1 started
] DISK_DRV: R [0]
] Test 1.1: Step 2 - OK
] DISK_DRV: R [10]
] Test 1.1: Step 4 - OK
] DISK_DRV: R [10]
] Test 1.1: Step 6 - OK
] TEST PASSED
] Test 1.2 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [20]
] Test 1.2: Step 3 - OK
] DISK_DRV: R [20]
] Test 1.2: Step 5 - OK
] TEST PASSED
] Test 1.3 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [30]
] Test 1.3: Step 3 - OK
] DISK_DRV: R [30]
] Test 1.3: Step 5 - OK
] TEST PASSED
] Test 1.4 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [40]
] Test 1.4: Step 3 - OK
] Test 1.4: Step 5 - OK
] TEST PASSED
] Test 1.5 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [50]
] Test 1.5: Step 1 - OK
] Test 1.5: Step 4 - OK
] TEST PASSED
] Test 2.1 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [60]
] Test 2.1: Step 3 - OK
] Test 2.1: Step 5 - OK
] DISK_DRV: W [60]
] TEST PASSED
] Test 2.2 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [70]
] Test 2.2: Step 3 - OK
] Test 2.2: Step 5 - OK
] DISK_DRV: W [70]
] TEST PASSED
] Test 3.1 - STARTED
] Thread #1 started
] Thread #2 started
] Test 3.1: Step 3 - OK
] DISK_DRV: W [80]
] Test 3.1: Step 5 - OK
] DISK_DRV: W [85]
] TEST PASSED
] Test 3.2 - STARTED
] Thread #1 started
] Thread #2 started
] Thread #3 started
] DISK_DRV: R [90]
] Thread #2 DEBLOCK
] Test 3.2: Step 5 - OK
] DISK_DRV: W [92]
] Thread #3 DEBLOCK
] DISK_DRV: W [94]
] TEST PASSED
] Test 3.3 - STARTED
] Thread #1 started
] Thread #2 started
] Thread #3 started
] DISK_DRV: R [96]
=> tftp: re-requesting exe; target must have reset
] DISK_DRV: R [98]
] Thread #2 DEBLOCK
[ 68/620] p:63 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/qoriq_e6500_32: block09.exe
Result: invalid Time: 0:00:20.541311 block09.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/libtests/block09/block09.exe.img
] Test 3.3: Step 5 - OK
] DISK_DRV: R [100]
] Thread #3 DEBLOCK
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/libtests/block09/block09.exe.img
] TEST PASSED
] Test 4.1 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [112]
] Test 4.1: Step 2 - OK
] DISK_DRV: W [112]
] Test 4.1: Step 5 - OK
] TEST PASSED
] Test 4.2 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [114]
] DISK_DRV: W [114]
] Test 4.2: Step 3 - OK
] Test 4.2: Step 7 - OK
] TEST PASSED
] Test 4.3 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [116]
] DISK_DRV: W [116]
] Test 4.3: Step 4 - OK
] TEST PASSED
]
=> test end: None
] *** END OF TEST BLOCK 8 ***
]
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: re-requesting exe; target must have reset
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] WARNING: adjusting available memory to 30000000
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
]
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
[ 69/620] p:63 f:1 u:0 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: block10.exe
<<skipping passes>>
[500/620] p:489 f:1 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical01.exe
Result: failed Time: 0:00:50.576420 spintrcritical01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical01/spintrcritical01.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical01/spintrcritical01.exe.img
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.2 MiB/s
] done
] Bytes transferred = 62285 (f34d hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62221 Bytes = 60.8 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 1
] *** BEGIN OF TEST SPINTRCRITICAL 1 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: FIFO/Without Timeout
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[501/620] p:489 f:2 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical02.exe
[502/620] p:490 f:2 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical03.exe
Result: failed Time: 0:00:50.123347 spintrcritical03.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical03/spintrcritical03.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical03/spintrcritical03.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.6 MiB/s
] done
] Bytes transferred = 62301 (f35d hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62237 Bytes = 60.8 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 3
] *** BEGIN OF TEST SPINTRCRITICAL 3 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[503/620] p:490 f:3 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical04.exe
Result: failed Time: 0:00:51.068008 spintrcritical04.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical04/spintrcritical04.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical04/spintrcritical04.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4 MiB/s
] done
] Bytes transferred = 62304 (f360 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62240 Bytes = 60.8 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 4
] *** BEGIN OF TEST SPINTRCRITICAL 4 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/With Timeout
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
[504/620] p:490 f:4 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical05.exe
Result: failed Time: 0:00:50.625055 spintrcritical05.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical05/spintrcritical05.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical05/spintrcritical05.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.2 MiB/s
] done
] Bytes transferred = 62295 (f357 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62231 Bytes = 60.8 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 5
] *** BEGIN OF TEST SPINTRCRITICAL 5 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout (Reverse)
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[505/620] p:490 f:5 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical06.exe
<<skipping passes>>
[509/620] p:494 f:5 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical10.exe
Result: failed Time: 0:00:49.590186 spintrcritical10.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 17 ms (1.9 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.7 MiB/s
] done
] Bytes transferred = 63803 (f93b hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 63739 Bytes = 62.2 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Init - Trying to generate any satisfied before timeout while blocking on event
] /home/EB/sebastian_h/rtems-5/c/src/../../testsuites/sptests/spintrcritical10/init.c: 144 ctx->hit
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[510/620] p:494 f:6 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical11.exe
<<skipping passes>>
[515/620] p:499 f:6 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical16.exe
Result: failed Time: 0:00:50.122710 spintrcritical16.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical16/spintrcritical16.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical16/spintrcritical16.exe.img
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.9 MiB/s
] done
] Bytes transferred = 62250 (f32a hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62186 Bytes = 60.7 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 16
] *** BEGIN OF TEST SPINTRCRITICAL 16 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Init - Trying to generate timeout of a thread that had its blocking
] Init - request satisfied while blocking but before time timeout
] Init - rtems_semaphore_create - OK
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
[516/620] p:499 f:7 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical18.exe
[517/620] p:500 f:7 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical20.exe
Result: failed Time: 0:00:38.108609 spintrcritical20.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical20/spintrcritical20.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical20/spintrcritical20.exe.img
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 3.9 MiB/s
] done
] Bytes transferred = 61770 (f14a hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 61706 Bytes = 60.3 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 20
] *** BEGIN OF TEST SPINTRCRITICAL 20 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] /home/EB/sebastian_h/rtems-5/c/src/../../testsuites/sptests/spintrcritical20/init.c: 149 ctx->thread_queue_was_null
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[518/620] p:500 f:8 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical21.exe
Result: failed Time: 0:00:33.071126 spintrcritical21.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical21/spintrcritical21.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical21/spintrcritical21.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 17 ms (1.9 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.6 MiB/s
] done
] Bytes transferred = 63032 (f638 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62968 Bytes = 61.5 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 21
] *** BEGIN OF TEST SPINTRCRITICAL 21 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] Event sent from ISR hitting synchronization point has NOT occurred
] /home/EB/sebastian_h/rtems-5/c/src/../../testsuites/sptests/spintrcritical21/init.c: 157 case_hit
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[519/620] p:500 f:9 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical22.exe
Result: failed Time: 0:00:49.590755 spintrcritical22.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical22/spintrcritical22.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical22/spintrcritical22.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 3.9 MiB/s
] done
] Bytes transferred = 61731 (f123 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 61667 Bytes = 60.2 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 22
] *** BEGIN OF TEST SPINTRCRITICAL 22 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] /home/EB/sebastian_h/rtems-5/c/src/../../testsuites/sptests/spintrcritical22/init.c: 118 ctx->done
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[520/620] p:500 f:10 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical23.exe
Result: failed Time: 0:00:35.106101 spintrcritical23.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical23/spintrcritical23.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical23/spintrcritical23.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.6 MiB/s
] done
] Bytes transferred = 62072 (f278 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62008 Bytes = 60.6 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 23
] *** BEGIN OF TEST SPINTRCRITICAL 23 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] /home/EB/sebastian_h/rtems-5/c/src/../../testsuites/sptests/spintrcritical23/init.c: 133 ctx->done
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[521/620] p:500 f:11 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: spintrcritical24.exe
Result: failed Time: 0:00:28.048435 spintrcritical24.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical24/spintrcritical24.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_32/testsuites/sptests/spintrcritical24/spintrcritical24.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 17 ms (1.9 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#######
] 4.3 MiB/s
] done
] Bytes transferred = 62808 (f558 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 62744 Bytes = 61.3 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 24
] *** BEGIN OF TEST SPINTRCRITICAL 24 ***
] *** TEST VERSION: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: smp legacy-net
] *** TEST TOOLS: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
] /home/EB/sebastian_h/rtems-5/c/src/../../testsuites/sptests/spintrcritical24/init.c: 118 ctx->append_count > 0
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.c59479faa8eb20d4d5139d7621fd179004680d3b
] RTEMS tools: 7.2.0 20170814 (RTEMS 5, RSB d1e6dfcb1e14d2f9d42c79e1137ddca6d8fc67d5, Newlib 2.5.0.20170922)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[522/620] p:500 f:12 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: splinkersets01.exe
<<skipping passes>>
[620/620] p:598 f:12 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_32: tmtimer01.exe
Passed: 599
Failed: 12
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 620
Failures:
spintrcritical01.exe
spintrcritical10.exe
spintrcritical04.exe
spintrcritical24.exe
spintrcritical23.exe
block08.exe
spintrcritical03.exe
spintrcritical20.exe
spintrcritical16.exe
spintrcritical05.exe
spintrcritical22.exe
spintrcritical21.exe
User Input:
fileio.exe
capture.exe
top.exe
monitor.exe
termios.exe
Benchmark:
whetstone.exe
linpack.exe
dhrystone.exe
Invalid:
block09.exe
Average test time: 0:00:11.032355
Testing time : 1:54:00.060443
More information about the build
mailing list