[rtems-test] 2017-10-12 07:06:26: beagleboneblack
Chris Johns
chrisj at rtems.org
Wed Oct 11 21:25:55 UTC 2017
Testing time : 1:19:28.509351
Average test time: 0:00:08.439839
Summary
=======
Passed: 543
Failed: 7
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 2
Timeout: 9
Invalid: 0
------------------
Total: 565
Failures:
tmtimer01.exe.img
spcache01.exe.img
debugger01.exe.img
sp37.exe.img
sp51.exe.img
tmcontext01.exe.img
fsjffs2gc01.exe.img
User Input:
top.exe.img
termios.exe.img
monitor.exe.img
fileio.exe.img
Benchmark:
dhrystone.exe.img
linpack.exe.img
Timeouts:
spintrcritical10.exe.img
monitor02.exe.img
dl02.exe.img
whetstone.exe.img
spintrcritical05.exe.img
spintrcritical22.exe.img
spintrcritical06.exe.img
spintrcritical15.exe.img
spintrcritical07.exe.img
Log
===
RTEMS Testing - Tester, 4.12 (5e40b4a1638c)
Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=beagleboneblack --timeout=30 --log=t.txt --mail --filter=*.exe.img ./arm-rtems4.12/c/beagleboneblack/testsuites
Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
[ 1/565] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | arm/beagleboneblack: dhrystone.exe.img
[ 2/565] p:0 f:0 u:0 e:0 I:0 B:1 t:0 i:0 | arm/beagleboneblack: linpack.exe.img
[ 3/565] p:0 f:0 u:0 e:0 I:0 B:2 t:0 i:0 | arm/beagleboneblack: whetstone.exe.img
Result: timeout Time: 0:00:31.720797 whetstone.exe.img
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Ý#˜ÌüTimed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] *** TIMEOUT TIMEOUT
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
[ 4/565] p:0 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsbdpart01.exe.img
[ 5/565] p:1 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsclose01.exe.img
[ 6/565] p:2 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsdosfsformat01.exe.img
[ 7/565] p:3 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsdosfsname01.exe.img
[ 8/565] p:4 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsdosfsname02.exe.img
[ 9/565] p:5 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsdosfssync01.exe.img
[ 10/565] p:6 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsdosfswrite01.exe.img
[ 11/565] p:7 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsfseeko01.exe.img
[ 12/565] p:8 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsimfsconfig01.exe.img
[ 13/565] p:9 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsimfsconfig02.exe.img
[ 14/565] p:10 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsimfsconfig03.exe.img
[ 15/565] p:11 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsimfsgeneric01.exe.img
[ 16/565] p:12 f:0 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsjffs2gc01.exe.img
Result: failed Time: 0:00:04.190677 fsjffs2gc01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *######
] 2.7 MiB/s
] done
] Bytes transferred = 83567 (1466f hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:12 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 83503 Bytes = 81.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: FSJFFS2GC 1
] *** BEGIN OF TEST FSJFFS2GC 1 ***
] Initializing filesystem JFFS2
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/fstests/fsjffs2gc01/init.c: 284 memcmp(&info, &info_after_first_gc, sizeof(*&info)) == 0ú
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[ 17/565] p:12 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsnofs01.exe.img
[ 18/565] p:13 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsrfsbitmap01.exe.img
[ 19/565] p:14 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: fsrofs01.exe.img
[ 20/565] p:15 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fserror.exe.img
[ 21/565] p:16 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fslink.exe.img
[ 22/565] p:17 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fspatheval.exe.img
[ 23/565] p:18 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fspermission.exe.img
[ 24/565] p:19 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fsrdwr.exe.img
[ 25/565] p:20 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fsscandir01.exe.img
[ 26/565] p:21 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fssymlink.exe.img
[ 27/565] p:22 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: imfs_fstime.exe.img
[ 28/565] p:23 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fserror.exe.img
[ 29/565] p:24 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fslink.exe.img
[ 30/565] p:25 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fspatheval.exe.img
[ 31/565] p:26 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fspermission.exe.img
[ 32/565] p:27 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fsrdwr.exe.img
[ 33/565] p:28 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fsscandir01.exe.img
[ 34/565] p:29 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fssymlink.exe.img
[ 35/565] p:30 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: jffs2_fstime.exe.img
[ 36/565] p:31 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mdosfs_fserror.exe.img
[ 37/565] p:32 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mdosfs_fspatheval.exe.img
[ 38/565] p:33 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mdosfs_fsrdwr.exe.img
[ 39/565] p:34 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mdosfs_fsscandir01.exe.img
[ 40/565] p:35 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mdosfs_fsstatvfs.exe.img
[ 41/565] p:36 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mdosfs_fstime.exe.img
[ 42/565] p:37 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fserror.exe.img
[ 43/565] p:38 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fslink.exe.img
[ 44/565] p:39 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fspatheval.exe.img
[ 45/565] p:40 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fspermission.exe.img
[ 46/565] p:41 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fsrdwr.exe.img
[ 47/565] p:42 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fsrename.exe.img
[ 48/565] p:43 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fsscandir01.exe.img
[ 49/565] p:44 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fssymlink.exe.img
[ 50/565] p:45 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mimfs_fstime.exe.img
[ 51/565] p:46 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fserror.exe.img
[ 52/565] p:47 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fsfpathconf.exe.img
[ 53/565] p:48 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fslink.exe.img
[ 54/565] p:49 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fspatheval.exe.img
[ 55/565] p:50 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fspermission.exe.img
[ 56/565] p:51 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fsrdwr.exe.img
[ 57/565] p:52 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fsscandir01.exe.img
[ 58/565] p:53 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fssymlink.exe.img
[ 59/565] p:54 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: mrfs_fstime.exe.img
[ 60/565] p:55 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block01.exe.img
[ 61/565] p:56 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block02.exe.img
[ 62/565] p:57 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block03.exe.img
[ 63/565] p:58 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block04.exe.img
[ 64/565] p:59 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block05.exe.img
[ 65/565] p:60 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block06.exe.img
[ 66/565] p:61 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block07.exe.img
[ 67/565] p:62 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block08.exe.img
[ 68/565] p:63 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block09.exe.img
[ 69/565] p:64 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block10.exe.img
[ 70/565] p:65 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block11.exe.img
[ 71/565] p:66 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block12.exe.img
[ 72/565] p:67 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block13.exe.img
[ 73/565] p:68 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block14.exe.img
[ 74/565] p:69 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block15.exe.img
[ 75/565] p:70 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block16.exe.img
[ 76/565] p:71 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: block17.exe.img
[ 77/565] p:72 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: bspcmdline01.exe.img
[ 78/565] p:73 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: capture01.exe.img
[ 79/565] p:74 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: complex.exe.img
[ 80/565] p:75 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: cpuuse.exe.img
[ 81/565] p:76 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: crypt01.exe.img
[ 82/565] p:77 f:1 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: debugger01.exe.img
Result: failed Time: 0:00:05.167815 debugger01.exe.img
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/debugger01/debugger01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (18 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *######
] 2.6 MiB/s
] done
] Bytes transferred = 85405 (14d9d hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:21 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 85341 Bytes = 83.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v4.2) ARMv7 [v7, baseline CP14 registers] breakpoints:5 watchpoints:1
]
] R0 = 0x0000005C R8 = 0x00000000
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000003 R10 = 0x00000000
] R3 = 0x03078002 R11 = 0x801037B0
] R4 = 0x801029B0 R12 = 0x801029B4
] R5 = 0x00000002 SP = 0x8010CBC0
] R6 = 0x801148B8 LR = 0x800153E4
] R7 = 0x00000000 PC = 0x80015428
] CPSR = 0x20000113 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[ 83/565] p:77 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: defaultconfig01.exe.img
[ 84/565] p:78 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: devfs01.exe.img
[ 85/565] p:79 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: devfs02.exe.img
[ 86/565] p:80 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: devfs03.exe.img
[ 87/565] p:81 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: devfs04.exe.img
[ 88/565] p:82 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: deviceio01.exe.img
[ 89/565] p:83 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: devnullfatal01.exe.img
[ 90/565] p:84 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: dl01.exe.img
[ 91/565] p:85 f:2 u:0 e:0 I:0 B:2 t:1 i:0 | arm/beagleboneblack: dl02.exe.img
Result: timeout Time: 0:00:34.414794 dl02.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/dl02/dl02.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (12 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 2.8 MiB/s
] done
] Bytes transferred = 105055 (19a5f hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:22 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 104991 Bytes = 102.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] load: /dl-o1.o
] handle: 0x80117920 has unresolved externals
] load: /dl-o2.o
] handle: 0x80118258 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o1.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o2.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] *** TIMEOUT TIMEOUT
[ 92/565] p:85 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: dl03.exe.img
[ 93/565] p:86 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: dl04.exe.img
[ 94/565] p:87 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: dl05.exe.img
[ 95/565] p:88 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: dumpbuf01.exe.img
[ 96/565] p:89 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: exit01.exe.img
[ 97/565] p:90 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: exit02.exe.img
[ 98/565] p:91 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: flashdisk01.exe.img
[ 99/565] p:92 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: gxx01.exe.img
[100/565] p:93 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: heapwalk.exe.img
[101/565] p:94 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: i2c01.exe.img
[102/565] p:95 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: libfdt01.exe.img
[103/565] p:96 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: malloc02.exe.img
[104/565] p:97 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: malloc03.exe.img
[105/565] p:98 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: malloc04.exe.img
[106/565] p:99 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: malloctest.exe.img
[107/565] p:100 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: math.exe.img
[108/565] p:101 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: mathf.exe.img
[109/565] p:102 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: mathl.exe.img
[110/565] p:103 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: md501.exe.img
[111/565] p:104 f:2 u:0 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: monitor.exe.img
[112/565] p:104 f:2 u:1 e:0 I:0 B:2 t:2 i:0 | arm/beagleboneblack: monitor02.exe.img
Result: timeout Time: 0:00:31.885815 monitor02.exe.img
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] ö!´šÔTimed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] *** TIMEOUT TIMEOUT
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
[113/565] p:104 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: mouse01.exe.img
[114/565] p:105 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: newlib01.exe.img
[115/565] p:106 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: putenvtest.exe.img
[116/565] p:107 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: pwdgrp01.exe.img
[117/565] p:108 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: pwdgrp02.exe.img
[118/565] p:109 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rbheap01.exe.img
[119/565] p:110 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rtmonuse.exe.img
[120/565] p:111 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sha.exe.img
[121/565] p:112 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: shell01.exe.img
[122/565] p:113 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sparsedisk01.exe.img
[123/565] p:114 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spi01.exe.img
[124/565] p:115 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: stackchk.exe.img
[125/565] p:116 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: stackchk01.exe.img
[126/565] p:117 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: stringto01.exe.img
[127/565] p:118 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: tar01.exe.img
[128/565] p:119 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: tar02.exe.img
[129/565] p:120 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: tar03.exe.img
[130/565] p:121 f:2 u:1 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios.exe.img
[131/565] p:121 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios01.exe.img
[132/565] p:122 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios02.exe.img
[133/565] p:123 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios03.exe.img
[134/565] p:124 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios04.exe.img
[135/565] p:125 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios05.exe.img
[136/565] p:126 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios06.exe.img
[137/565] p:127 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios07.exe.img
[138/565] p:128 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios08.exe.img
[139/565] p:129 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: termios09.exe.img
[140/565] p:130 f:2 u:2 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: top.exe.img
[141/565] p:130 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: tztest.exe.img
[142/565] p:131 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: uid01.exe.img
[143/565] p:132 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: utf8proc01.exe.img
[144/565] p:133 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx01.exe.img
[145/565] p:134 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx02.exe.img
[146/565] p:135 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx03.exe.img
[147/565] p:136 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx04.exe.img
[148/565] p:137 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx05.exe.img
[149/565] p:138 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx06.exe.img
[150/565] p:139 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx07.exe.img
[151/565] p:140 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx08.exe.img
[152/565] p:141 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx09.exe.img
[153/565] p:142 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx10.exe.img
[154/565] p:143 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx11.exe.img
[155/565] p:144 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx12.exe.img
[156/565] p:145 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx13.exe.img
[157/565] p:146 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx14.exe.img
[158/565] p:147 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx15.exe.img
[159/565] p:148 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psx16.exe.img
[160/565] p:149 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxaio01.exe.img
[161/565] p:150 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxaio02.exe.img
[162/565] p:151 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxaio03.exe.img
[163/565] p:152 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxalarm01.exe.img
[164/565] p:153 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxautoinit01.exe.img
[165/565] p:154 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxautoinit02.exe.img
[166/565] p:155 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxbarrier01.exe.img
[167/565] p:156 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcancel.exe.img
[168/565] p:157 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcancel01.exe.img
[169/565] p:158 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxchroot01.exe.img
[170/565] p:159 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxclassic01.exe.img
[171/565] p:160 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcleanup.exe.img
[172/565] p:161 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcleanup01.exe.img
[173/565] p:162 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcleanup02.exe.img
[174/565] p:163 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxclock.exe.img
[175/565] p:164 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxclock01.exe.img
[176/565] p:165 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxconcurrency01.exe.img
[177/565] p:166 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcond01.exe.img
[178/565] p:167 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxcond02.exe.img
[179/565] p:168 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxconfig01.exe.img
[180/565] p:169 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxdevctl01.exe.img
[181/565] p:170 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxeintr_join.exe.img
[182/565] p:171 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxenosys.exe.img
[183/565] p:172 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxfatal01.exe.img
[184/565] p:173 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxfatal02.exe.img
[185/565] p:174 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxfchx01.exe.img
[186/565] p:175 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxfile01.exe.img
[187/565] p:176 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxfile02.exe.img
[188/565] p:177 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxfilelock01.exe.img
[189/565] p:178 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxgetattrnp01.exe.img
[190/565] p:179 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxgetrusage01.exe.img
[191/565] p:180 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxglobalcon01.exe.img
[192/565] p:181 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxglobalcon02.exe.img
[193/565] p:182 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxid01.exe.img
[194/565] p:183 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psximfs01.exe.img
[195/565] p:184 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psximfs02.exe.img
[196/565] p:185 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxintrcritical01.exe.img
[197/565] p:186 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxitimer.exe.img
[198/565] p:187 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey01.exe.img
[199/565] p:188 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey02.exe.img
[200/565] p:189 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey03.exe.img
[201/565] p:190 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey04.exe.img
[202/565] p:191 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey05.exe.img
[203/565] p:192 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey06.exe.img
[204/565] p:193 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey07.exe.img
[205/565] p:194 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey08.exe.img
[206/565] p:195 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey09.exe.img
[207/565] p:196 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxkey10.exe.img
[208/565] p:197 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmmap01.exe.img
[209/565] p:198 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmount.exe.img
[210/565] p:199 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmsgq01.exe.img
[211/565] p:200 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmsgq02.exe.img
[212/565] p:201 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmsgq03.exe.img
[213/565] p:202 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmsgq04.exe.img
[214/565] p:203 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxmutexattr01.exe.img
[215/565] p:204 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxobj01.exe.img
[216/565] p:205 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxonce01.exe.img
[217/565] p:206 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxpasswd01.exe.img
[218/565] p:207 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxpasswd02.exe.img
[219/565] p:208 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxpipe01.exe.img
[220/565] p:209 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxrdwrv.exe.img
[221/565] p:210 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxreaddir.exe.img
[222/565] p:211 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxrwlock01.exe.img
[223/565] p:212 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsem01.exe.img
[224/565] p:213 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxshm01.exe.img
[225/565] p:214 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxshm02.exe.img
[226/565] p:215 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsignal01.exe.img
[227/565] p:216 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsignal02.exe.img
[228/565] p:217 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsignal03.exe.img
[229/565] p:218 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsignal04.exe.img
[230/565] p:219 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsignal05.exe.img
[231/565] p:220 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsignal06.exe.img
[232/565] p:221 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxspin01.exe.img
[233/565] p:222 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxstack01.exe.img
[234/565] p:223 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxstack02.exe.img
[235/565] p:224 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxstat.exe.img
[236/565] p:225 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxstrsignal01.exe.img
[237/565] p:226 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxsysconf.exe.img
[238/565] p:227 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxthreadname01.exe.img
[239/565] p:228 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtime.exe.img
[240/565] p:229 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtimer01.exe.img
[241/565] p:230 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtimer02.exe.img
[242/565] p:231 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtimes01.exe.img
[243/565] p:232 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxualarm.exe.img
[244/565] p:233 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxusleep.exe.img
[245/565] p:234 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmbarrier01.exe.img
[246/565] p:235 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmbarrier02.exe.img
[247/565] p:236 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmbarrier03.exe.img
[248/565] p:237 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmbarrier04.exe.img
[249/565] p:238 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmclocknanosleep01.exe.img
[250/565] p:239 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmclocknanosleep02.exe.img
[251/565] p:240 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmclocknanosleep03.exe.img
[252/565] p:241 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond01.exe.img
[253/565] p:242 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond02.exe.img
[254/565] p:243 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond03.exe.img
[255/565] p:244 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond04.exe.img
[256/565] p:245 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond05.exe.img
[257/565] p:246 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond06.exe.img
[258/565] p:247 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond07.exe.img
[259/565] p:248 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond08.exe.img
[260/565] p:249 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond09.exe.img
[261/565] p:250 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmcond10.exe.img
[262/565] p:251 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmkey01.exe.img
[263/565] p:252 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmkey02.exe.img
[264/565] p:253 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmq01.exe.img
[265/565] p:254 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex01.exe.img
[266/565] p:255 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex02.exe.img
[267/565] p:256 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex03.exe.img
[268/565] p:257 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex04.exe.img
[269/565] p:258 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex05.exe.img
[270/565] p:259 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex06.exe.img
[271/565] p:260 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmmutex07.exe.img
[272/565] p:261 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmnanosleep01.exe.img
[273/565] p:262 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmnanosleep02.exe.img
[274/565] p:263 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock01.exe.img
[275/565] p:264 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock02.exe.img
[276/565] p:265 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock03.exe.img
[277/565] p:266 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock04.exe.img
[278/565] p:267 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock05.exe.img
[279/565] p:268 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock06.exe.img
[280/565] p:269 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmrwlock07.exe.img
[281/565] p:270 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsem01.exe.img
[282/565] p:271 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsem02.exe.img
[283/565] p:272 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsem03.exe.img
[284/565] p:273 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsem04.exe.img
[285/565] p:274 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsem05.exe.img
[286/565] p:275 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsleep01.exe.img
[287/565] p:276 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmsleep02.exe.img
[288/565] p:277 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmthread01.exe.img
[289/565] p:278 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmthread02.exe.img
[290/565] p:279 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmthread03.exe.img
[291/565] p:280 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmthread04.exe.img
[292/565] p:281 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmthread05.exe.img
[293/565] p:282 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: psxtmthread06.exe.img
[294/565] p:283 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rhdeadlockbrk.exe.img
[295/565] p:284 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rhilatency.exe.img
[296/565] p:285 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rhmlatency.exe.img
[297/565] p:286 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rhsemshuffle.exe.img
[298/565] p:287 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rhtaskpreempt.exe.img
[299/565] p:288 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: rhtaskswitch.exe.img
[300/565] p:289 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: base_sp.exe.img
[301/565] p:290 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: capture.exe.img
[302/565] p:291 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: cdtest.exe.img
[303/565] p:292 f:2 u:3 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: fileio.exe.img
[304/565] p:292 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: hello.exe.img
[305/565] p:293 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: cxx_iostream.exe.img
[306/565] p:294 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: minimum.exe.img
[307/565] p:295 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: nsecs.exe.img
[308/565] p:296 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: paranoia.exe.img
[309/565] p:297 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: ticker.exe.img
[310/565] p:298 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: unlimited.exe.img
[311/565] p:299 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp01.exe.img
[312/565] p:300 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp02.exe.img
[313/565] p:301 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp03.exe.img
[314/565] p:302 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp04.exe.img
[315/565] p:303 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp05.exe.img
[316/565] p:304 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp06.exe.img
[317/565] p:305 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp07.exe.img
[318/565] p:306 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp08.exe.img
[319/565] p:307 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp11.exe.img
[320/565] p:308 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp12.exe.img
[321/565] p:309 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp13.exe.img
[322/565] p:310 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp14.exe.img
[323/565] p:311 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp15.exe.img
[324/565] p:312 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp16.exe.img
[325/565] p:313 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp17.exe.img
[326/565] p:314 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp18.exe.img
[327/565] p:315 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp19.exe.img
[328/565] p:316 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp20.exe.img
[329/565] p:317 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp2038.exe.img
[330/565] p:318 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp21.exe.img
[331/565] p:319 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp22.exe.img
[332/565] p:320 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp23.exe.img
[333/565] p:321 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp24.exe.img
[334/565] p:322 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp25.exe.img
[335/565] p:323 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp26.exe.img
[336/565] p:324 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp27.exe.img
[337/565] p:325 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp27a.exe.img
[338/565] p:326 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp29.exe.img
[339/565] p:327 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp30.exe.img
[340/565] p:328 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp31.exe.img
[341/565] p:329 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp32.exe.img
[342/565] p:330 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp33.exe.img
[343/565] p:331 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp34.exe.img
[344/565] p:332 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp35.exe.img
[345/565] p:333 f:2 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp37.exe.img
Result: failed Time: 0:00:04.616882 sp37.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp37/sp37.exe.img
] DHCP client bound to address 10.10.5.203 (13 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 54984 (d6c8 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:28 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 54920 Bytes = 53.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SP 37
] *** BEGIN OF TEST SP 37 ***
] clock_tick from task level
] Blocking task... suspending self
] clock_tick from task level with preempt -- OK
] interrupt is in progress (use body)
] interrupt disable (use inline)
] interrupt flash (use inline)
] interrupt enable (use inline)
] interrupt level mode (use inline)
] test case working..
] interrupt disable (use body)þ
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[346/565] p:333 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp38.exe.img
[347/565] p:334 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp40.exe.img
[348/565] p:335 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp41.exe.img
[349/565] p:336 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp42.exe.img
[350/565] p:337 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp43.exe.img
[351/565] p:338 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp44.exe.img
[352/565] p:339 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp45.exe.img
[353/565] p:340 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp46.exe.img
[354/565] p:341 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp47.exe.img
[355/565] p:342 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp48.exe.img
[356/565] p:343 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp49.exe.img
[357/565] p:344 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp50.exe.img
[358/565] p:345 f:3 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp51.exe.img
Result: failed Time: 0:00:04.690450 sp51.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp51/sp51.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.6 MiB/s
] done
] Bytes transferred = 49378 (c0e2 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:24 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49314 Bytes = 48.2 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/sp51/init.c: 41 sc == RTEMS_SUCCESSFULþ
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[359/565] p:345 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp52.exe.img
[360/565] p:346 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp53.exe.img
[361/565] p:347 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp54.exe.img
[362/565] p:348 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp55.exe.img
[363/565] p:349 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp56.exe.img
[364/565] p:350 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp57.exe.img
[365/565] p:351 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp58.exe.img
[366/565] p:352 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp59.exe.img
[367/565] p:353 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp60.exe.img
[368/565] p:354 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp62.exe.img
[369/565] p:355 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp63.exe.img
[370/565] p:356 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp64.exe.img
[371/565] p:357 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp65.exe.img
[372/565] p:358 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp66.exe.img
[373/565] p:359 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp67.exe.img
[374/565] p:360 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp68.exe.img
[375/565] p:361 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp69.exe.img
[376/565] p:362 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp70.exe.img
[377/565] p:363 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp71.exe.img
[378/565] p:364 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp72.exe.img
[379/565] p:365 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp73.exe.img
[380/565] p:366 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp74.exe.img
[381/565] p:367 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp75.exe.img
[382/565] p:368 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp76.exe.img
[383/565] p:369 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sp77.exe.img
[384/565] p:370 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spassoc01.exe.img
[385/565] p:371 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spatomic01.exe.img
[386/565] p:372 f:4 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcache01.exe.img
Result: failed Time: 0:00:04.622418 spcache01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spcache01/spcache01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.7 MiB/s
] done
] Bytes transferred = 51136 (c7c0 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:27 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51072 Bytes = 49.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] data cache flush and invalidate test
] data cache operations by line passed the test (copy-back cache detected)
] data cache line size 32 bytes
] data cache size 0 bytes
] load 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] store 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] instruction cache line size 32 bytes
] instruction cache size 0 bytes
]
] R0 = 0x00000001 R8 = 0x00000001
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x60000113
] R3 = 0x20C5187D R11 = 0x00000000
] R4 = 0x00000001 R12 = 0x00000001
] R5 = 0x00000000 SP = 0x80107698
] R6 = 0x00000001 LR = 0x80001900
] R7 = 0x00000000 PC = 0x800023D0
] CPSR = 0x00000193 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[387/565] p:372 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcbssched01.exe.img
[388/565] p:373 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcbssched02.exe.img
[389/565] p:374 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcbssched03.exe.img
[390/565] p:375 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spchain.exe.img
[391/565] p:376 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spclock_err01.exe.img
[392/565] p:377 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spclock_err02.exe.img
[393/565] p:378 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcontext01.exe.img
[394/565] p:379 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcoverage.exe.img
[395/565] p:380 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcpucounter01.exe.img
[396/565] p:381 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spcpuset01.exe.img
[397/565] p:382 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spedfsched01.exe.img
[398/565] p:383 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spedfsched02.exe.img
[399/565] p:384 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spedfsched03.exe.img
[400/565] p:385 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spedfsched04.exe.img
[401/565] p:386 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sperror01.exe.img
[402/565] p:387 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sperror02.exe.img
[403/565] p:388 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: sperror03.exe.img
[404/565] p:389 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spevent_err03.exe.img
[405/565] p:390 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: speventsystem01.exe.img
[406/565] p:391 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: speventtransient01.exe.img
[407/565] p:392 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spextensions01.exe.img
[408/565] p:393 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal01.exe.img
[409/565] p:394 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal02.exe.img
[410/565] p:395 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal03.exe.img
[411/565] p:396 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal04.exe.img
[412/565] p:397 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal05.exe.img
[413/565] p:398 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal06.exe.img
[414/565] p:399 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal07.exe.img
[415/565] p:400 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal08.exe.img
[416/565] p:401 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal09.exe.img
[417/565] p:402 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal10.exe.img
[418/565] p:403 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal11.exe.img
[419/565] p:404 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal12.exe.img
[420/565] p:405 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal13.exe.img
[421/565] p:406 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal14.exe.img
[422/565] p:407 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal15.exe.img
[423/565] p:408 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal16.exe.img
[424/565] p:409 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal17.exe.img
[425/565] p:410 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal18.exe.img
[426/565] p:411 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal19.exe.img
[427/565] p:412 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal20.exe.img
[428/565] p:413 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal24.exe.img
[429/565] p:414 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal25.exe.img
[430/565] p:415 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal26.exe.img
[431/565] p:416 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal27.exe.img
[432/565] p:417 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal28.exe.img
[433/565] p:418 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal29.exe.img
[434/565] p:419 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal30.exe.img
[435/565] p:420 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfatal31.exe.img
[436/565] p:421 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfifo01.exe.img
[437/565] p:422 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfifo02.exe.img
[438/565] p:423 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfifo03.exe.img
[439/565] p:424 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfifo04.exe.img
[440/565] p:425 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfifo05.exe.img
[441/565] p:426 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spfreechain01.exe.img
[442/565] p:427 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spglobalcon01.exe.img
[443/565] p:428 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spheapprot.exe.img
[444/565] p:429 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spinternalerror01.exe.img
[445/565] p:430 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spinternalerror02.exe.img
[446/565] p:431 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spintr_err01.exe.img
[447/565] p:432 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spintrcritical01.exe.img
[448/565] p:433 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spintrcritical02.exe.img
[449/565] p:434 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spintrcritical03.exe.img
[450/565] p:435 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spintrcritical04.exe.img
[451/565] p:436 f:5 u:4 e:0 I:0 B:2 t:3 i:0 | arm/beagleboneblack: spintrcritical05.exe.img
Result: timeout Time: 0:00:34.745664 spintrcritical05.exe.img
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical05/spintrcritical05.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (13 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 50837 (c695 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:24 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50773 Bytes = 49.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 5
] *** BEGIN OF TEST SPINTRCRITICAL 5 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout (Reverse)
] *** TIMEOUT TIMEOUT
[452/565] p:436 f:5 u:4 e:0 I:0 B:2 t:4 i:0 | arm/beagleboneblack: spintrcritical06.exe.img
Result: timeout Time: 0:00:37.637374 spintrcritical06.exe.img
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical06/spintrcritical06.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (5 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.6 MiB/s
] done
] Bytes transferred = 51074 (c782 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:26 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51010 Bytes = 49.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 6
] *** BEGIN OF TEST SPINTRCRITICAL 6 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - There is no way for the test to know if it hits the case
] Init - Variation is: Priority/Restart Search Task (Forward)
] *** TIMEOUT TIMEOUT
[453/565] p:436 f:5 u:4 e:0 I:0 B:2 t:5 i:0 | arm/beagleboneblack: spintrcritical07.exe.img
Result: timeout Time: 0:00:37.738472 spintrcritical07.exe.img
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.7 MiB/s
] done
] Bytes transferred = 51060 (c774 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:28 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50996 Bytes = 49.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 7
] *** BEGIN OF TEST SPINTRCRITICAL 7 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - There is no way for the test to know if it hits the case
] Init - Variation is: Priority/Restart Search Task (Backward)
] *** TIMEOUT TIMEOUT
[454/565] p:436 f:5 u:4 e:0 I:0 B:2 t:6 i:0 | arm/beagleboneblack: spintrcritical08.exe.img
[455/565] p:437 f:5 u:4 e:0 I:0 B:2 t:6 i:0 | arm/beagleboneblack: spintrcritical09.exe.img
[456/565] p:438 f:5 u:4 e:0 I:0 B:2 t:6 i:0 | arm/beagleboneblack: spintrcritical10.exe.img
Result: timeout Time: 0:00:34.580395 spintrcritical10.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.7 MiB/s
] done
] Bytes transferred = 51321 (c879 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:27 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51257 Bytes = 50.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] Init - Trying to generate any satisfied before timeout while blocking on event
] *** TIMEOUT TIMEOUT
[457/565] p:438 f:5 u:4 e:0 I:0 B:2 t:7 i:0 | arm/beagleboneblack: spintrcritical11.exe.img
[458/565] p:439 f:5 u:4 e:0 I:0 B:2 t:7 i:0 | arm/beagleboneblack: spintrcritical12.exe.img
[459/565] p:440 f:5 u:4 e:0 I:0 B:2 t:7 i:0 | arm/beagleboneblack: spintrcritical13.exe.img
[460/565] p:441 f:5 u:4 e:0 I:0 B:2 t:7 i:0 | arm/beagleboneblack: spintrcritical14.exe.img
[461/565] p:442 f:5 u:4 e:0 I:0 B:2 t:7 i:0 | arm/beagleboneblack: spintrcritical15.exe.img
Result: timeout Time: 0:00:34.361274 spintrcritical15.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical15/spintrcritical15.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (8 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.9 MiB/s
] done
] Bytes transferred = 51170 (c7e2 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:26 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51106 Bytes = 49.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 15
] *** BEGIN OF TEST SPINTRCRITICAL 15 ***
] Init - Trying to generate timeout of a thread while another is blocking
] Init - on the same thread queue
] Init - There is no way for the test to know if it hits the case
] Init - rtems_semaphore_create - OK
] Init - rtems_task_create - OK
] *** TIMEOUT TIMEOUT
[462/565] p:442 f:5 u:4 e:0 I:0 B:2 t:8 i:0 | arm/beagleboneblack: spintrcritical16.exe.img
[463/565] p:443 f:5 u:4 e:0 I:0 B:2 t:8 i:0 | arm/beagleboneblack: spintrcritical18.exe.img
[464/565] p:444 f:5 u:4 e:0 I:0 B:2 t:8 i:0 | arm/beagleboneblack: spintrcritical20.exe.img
[465/565] p:445 f:5 u:4 e:0 I:0 B:2 t:8 i:0 | arm/beagleboneblack: spintrcritical21.exe.img
[466/565] p:446 f:5 u:4 e:0 I:0 B:2 t:8 i:0 | arm/beagleboneblack: spintrcritical22.exe.img
Result: timeout Time: 0:00:34.363762 spintrcritical22.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical22/spintrcritical22.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.5 MiB/s
] done
] Bytes transferred = 50366 (c4be hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:28 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50302 Bytes = 49.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 22
] *** BEGIN OF TEST SPINTRCRITICAL 22 ***
] *** TIMEOUT TIMEOUT
[467/565] p:446 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spintrcritical23.exe.img
[468/565] p:447 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spintrcritical24.exe.img
[469/565] p:448 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: splinkersets01.exe.img
[470/565] p:449 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spmkdir.exe.img
[471/565] p:450 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spmountmgr01.exe.img
[472/565] p:451 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spmrsp01.exe.img
[473/565] p:452 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spmsgq_err01.exe.img
[474/565] p:453 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spmsgq_err02.exe.img
[475/565] p:454 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spmutex01.exe.img
[476/565] p:455 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spnsext01.exe.img
[477/565] p:456 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spobjgetnext.exe.img
[478/565] p:457 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sppagesize.exe.img
[479/565] p:458 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sppartition_err01.exe.img
[480/565] p:459 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spport_err01.exe.img
[481/565] p:460 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spprintk.exe.img
[482/565] p:461 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spprivenv01.exe.img
[483/565] p:462 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spprofiling01.exe.img
[484/565] p:463 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spqreslib.exe.img
[485/565] p:464 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spratemon_err01.exe.img
[486/565] p:465 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sprbtree01.exe.img
[487/565] p:466 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spregion_err01.exe.img
[488/565] p:467 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sprmsched01.exe.img
[489/565] p:468 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sprmsched02.exe.img
[490/565] p:469 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spscheduler01.exe.img
[491/565] p:470 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsem01.exe.img
[492/565] p:471 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsem02.exe.img
[493/565] p:472 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsem03.exe.img
[494/565] p:473 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsem_err01.exe.img
[495/565] p:474 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsem_err02.exe.img
[496/565] p:475 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsignal_err01.exe.img
[497/565] p:476 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsimplesched01.exe.img
[498/565] p:477 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsimplesched02.exe.img
[499/565] p:478 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsimplesched03.exe.img
[500/565] p:479 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsize.exe.img
[501/565] p:480 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spstdthreads01.exe.img
[502/565] p:481 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spstkalloc.exe.img
[503/565] p:482 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spstkalloc02.exe.img
[504/565] p:483 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsysinit01.exe.img
[505/565] p:484 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spsyslock01.exe.img
[506/565] p:485 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptask_err01.exe.img
[507/565] p:486 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptask_err02.exe.img
[508/565] p:487 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptask_err03.exe.img
[509/565] p:488 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptask_err04.exe.img
[510/565] p:489 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptasknopreempt01.exe.img
[511/565] p:490 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spthreadlife01.exe.img
[512/565] p:491 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spthreadq01.exe.img
[513/565] p:492 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimecounter01.exe.img
[514/565] p:493 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimecounter02.exe.img
[515/565] p:494 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimecounter03.exe.img
[516/565] p:495 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimer_err01.exe.img
[517/565] p:496 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimer_err02.exe.img
[518/565] p:497 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimerserver01.exe.img
[519/565] p:498 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptimespec01.exe.img
[520/565] p:499 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptls01.exe.img
[521/565] p:500 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptls02.exe.img
[522/565] p:501 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: sptls03.exe.img
[523/565] p:502 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spwatchdog.exe.img
[524/565] p:503 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: spwkspace.exe.img
[525/565] p:504 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm01.exe.img
[526/565] p:505 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm02.exe.img
[527/565] p:506 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm03.exe.img
[528/565] p:507 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm04.exe.img
[529/565] p:508 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm05.exe.img
[530/565] p:509 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm06.exe.img
[531/565] p:510 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm07.exe.img
[532/565] p:511 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm08.exe.img
[533/565] p:512 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm09.exe.img
[534/565] p:513 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm10.exe.img
[535/565] p:514 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm11.exe.img
[536/565] p:515 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm12.exe.img
[537/565] p:516 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm13.exe.img
[538/565] p:517 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm14.exe.img
[539/565] p:518 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm15.exe.img
[540/565] p:519 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm16.exe.img
[541/565] p:520 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm17.exe.img
[542/565] p:521 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm18.exe.img
[543/565] p:522 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm19.exe.img
[544/565] p:523 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm20.exe.img
[545/565] p:524 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm21.exe.img
[546/565] p:525 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm22.exe.img
[547/565] p:526 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm23.exe.img
[548/565] p:527 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm24.exe.img
[549/565] p:528 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm25.exe.img
[550/565] p:529 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm26.exe.img
[551/565] p:530 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm27.exe.img
[552/565] p:531 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm28.exe.img
[553/565] p:532 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm29.exe.img
[554/565] p:533 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm30.exe.img
[555/565] p:534 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm31.exe.img
[556/565] p:535 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm32.exe.img
[557/565] p:536 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm33.exe.img
[558/565] p:537 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm34.exe.img
[559/565] p:538 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm35.exe.img
[560/565] p:539 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tm36.exe.img
[561/565] p:540 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tmck.exe.img
[562/565] p:541 f:5 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tmcontext01.exe.img
Result: failed Time: 0:00:04.601829 tmcontext01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmcontext01/tmcontext01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.6 MiB/s
] done
] Bytes transferred = 49952 (c320 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:17 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49888 Bytes = 48.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: TMCONTEXT 1
] *** BEGIN OF TEST TMCONTEXT 1 ***
] <Test>
] <ContextSwitchTest environment="normal">
] <Sample functionNestLevel="0">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="1">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="2">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="3">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="4">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="5">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="6">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="7">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="8">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="9">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="10">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="11">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="12">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="13">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="14">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="15">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] </ContextSwitchTest>
] <ContextSwitchTest environment="dirty">
]
] R0 = 0x00000008 R8 = 0x80103600
] R1 = 0x00000008 R9 = 0x801026BC
] R2 = 0x00000000 R10 = 0x80103600
] R3 = 0x20C5187D R11 = 0x801157FC
] R4 = 0x00000000 R12 = 0x00000008
] R5 = 0x00000000 SP = 0x801157D8
] R6 = 0x00000000 LR = 0x8000059C
] R7 = 0x00000000 PC = 0x80000C4C
] CPSR = 0x00000193 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[563/565] p:541 f:6 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tmfine01.exe.img
[564/565] p:542 f:6 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tmoverhd.exe.img
[565/565] p:543 f:6 u:4 e:0 I:0 B:2 t:9 i:0 | arm/beagleboneblack: tmtimer01.exe.img
Result: failed Time: 0:00:06.378310 tmtimer01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmtimer01/tmtimer01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.7 MiB/s
] done
] Bytes transferred = 50220 (c42c hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2017-10-11 11:29:17 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50156 Bytes = 49 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] <TMTimer01 timerCount="65504">
] <Sample>
] <ActiveTimers>0</ActiveTimers>
] R0 = 0x00000000 R8 = 0x00000020
] R1 = 0x00000008 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20C5187D R11 = 0x00000000
] R4 = 0x80014E38 R12 = 0x00000008
] R5 = 0x12010001 SP = 0x80106E40
] R6 = 0x00000000 LR = 0x80000550
] R7 = 0x8010277C PC = 0x80000BD8
] CPSR = 0x00000113 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
=> target off: wemo-reset CSEng3 0:
Passed: 543
Failed: 7
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 2
Timeout: 9
Invalid: 0
------------------
Total: 565
Failures:
tmtimer01.exe.img
spcache01.exe.img
debugger01.exe.img
sp37.exe.img
sp51.exe.img
tmcontext01.exe.img
fsjffs2gc01.exe.img
User Input:
top.exe.img
termios.exe.img
monitor.exe.img
fileio.exe.img
Benchmark:
dhrystone.exe.img
linpack.exe.img
Timeouts:
spintrcritical10.exe.img
monitor02.exe.img
dl02.exe.img
whetstone.exe.img
spintrcritical05.exe.img
spintrcritical22.exe.img
spintrcritical06.exe.img
spintrcritical15.exe.img
spintrcritical07.exe.img
Average test time: 0:00:08.439839
Testing time : 1:19:28.509351
More information about the build
mailing list