[rtems-test] 2017-10-13 01:53:38: xilinx_zynq_zedboard
Chris Johns
chrisj at rtems.org
Thu Oct 12 16:48:22 UTC 2017
Testing time : 1:54:43.620899
Average test time: 0:00:12.183399
Summary
=======
Passed: 480
Failed: 48
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 8
Invalid: 22
------------------
Total: 565
Failures:
sperror03.exe.img
psxsignal04.exe.img
psxtmcond06.exe.img
sp76.exe.img
sperror01.exe.img
psx05.exe.img
spratemon_err01.exe.img
spintr_err01.exe.img
sptask_err03.exe.img
tm15.exe.img
sp06.exe.img
tm19.exe.img
psxaio02.exe.img
debugger01.exe.img
sp02.exe.img
sp51.exe.img
sptask_err02.exe.img
spclock_err02.exe.img
spsem_err02.exe.img
psxtmbarrier03.exe.img
psxtmcond03.exe.img
sp16.exe.img
spsignal_err01.exe.img
psxtmrwlock06.exe.img
psxtmsem05.exe.img
sp62.exe.img
psxsignal03.exe.img
sp37.exe.img
psxtmcond07.exe.img
sp74.exe.img
psxconfig01.exe.img
sp13.exe.img
psxtmrwlock07.exe.img
psxtmsem04.exe.img
spmsgq_err01.exe.img
spclock_err01.exe.img
psxgetattrnp01.exe.img
rhdeadlockbrk.exe.img
spthreadq01.exe.img
fsjffs2gc01.exe.img
spport_err01.exe.img
sp66.exe.img
sperror02.exe.img
spsem_err01.exe.img
psxtmmutex05.exe.img
spmsgq_err02.exe.img
tm27.exe.img
spevent_err03.exe.img
User Input:
fileio.exe.img
top.exe.img
monitor.exe.img
termios.exe.img
Benchmark:
linpack.exe.img
dhrystone.exe.img
whetstone.exe.img
Timeouts:
psxclassic01.exe.img
sptask_err01.exe.img
dl02.exe.img
sp59.exe.img
sp65.exe.img
tm20.exe.img
spsimplesched02.exe.img
sp07.exe.img
Invalid:
tm34.exe.img
spinternalerror01.exe.img
tm17.exe.img
sptimecounter01.exe.img
tm23.exe.img
tm03.exe.img
tm36.exe.img
tm26.exe.img
tm14.exe.img
tm24.exe.img
dumpbuf01.exe.img
tm13.exe.img
tm32.exe.img
tm11.exe.img
tm16.exe.img
tm07.exe.img
tm22.exe.img
tm05.exe.img
spsysinit01.exe.img
tm04.exe.img
tm12.exe.img
sp54.exe.img
Log
===
RTEMS Testing - Tester, 4.12 (5e40b4a1638c modified)
Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=xilinx_zynq_zedboard --timeout=120 --log=t.txt --mail --filter=*.exe.img ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites
Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
[ 1/565] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | arm/xilinx_zynq_zedboard: dhrystone.exe.img
[ 2/565] p:0 f:0 u:0 e:0 I:0 B:1 t:0 i:0 | arm/xilinx_zynq_zedboard: linpack.exe.img
[ 3/565] p:0 f:0 u:0 e:0 I:0 B:2 t:0 i:0 | arm/xilinx_zynq_zedboard: whetstone.exe.img
[ 4/565] p:0 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsbdpart01.exe.img
[ 5/565] p:1 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsclose01.exe.img
[ 6/565] p:2 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsdosfsformat01.exe.img
[ 7/565] p:3 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsdosfsname01.exe.img
[ 8/565] p:4 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsdosfsname02.exe.img
[ 9/565] p:5 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsdosfssync01.exe.img
[ 10/565] p:6 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsdosfswrite01.exe.img
[ 11/565] p:7 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsfseeko01.exe.img
[ 12/565] p:8 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsimfsconfig01.exe.img
[ 13/565] p:9 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsimfsconfig02.exe.img
[ 14/565] p:10 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsimfsconfig03.exe.img
[ 15/565] p:11 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsimfsgeneric01.exe.img
[ 16/565] p:12 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsjffs2gc01.exe.img
Result: failed Time: 0:00:03.633757 fsjffs2gc01.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (270 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 4.2 MiB/s
] done
] Bytes transferred = 78388 (13234 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 78324 Bytes = 76.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: FSJFFS2GC 1
] *** BEGIN OF TEST FSJFFS2GC 1 ***
] Initializing filesystem JFFS2
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/fstests/fsjffs2gc01/init.c: 284 memcmp(&info, &info_after_first_gc, sizeof(*&info)) == 0
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 17/565] p:12 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsnofs01.exe.img
[ 18/565] p:13 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsrfsbitmap01.exe.img
[ 19/565] p:14 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsrofs01.exe.img
[ 20/565] p:15 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fserror.exe.img
[ 21/565] p:16 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fslink.exe.img
[ 22/565] p:17 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fspatheval.exe.img
[ 23/565] p:18 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fspermission.exe.img
[ 24/565] p:19 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fsrdwr.exe.img
[ 25/565] p:20 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fsscandir01.exe.img
[ 26/565] p:21 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fssymlink.exe.img
[ 27/565] p:22 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: imfs_fstime.exe.img
[ 28/565] p:23 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fserror.exe.img
[ 29/565] p:24 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fslink.exe.img
[ 30/565] p:25 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fspatheval.exe.img
[ 31/565] p:26 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fspermission.exe.img
[ 32/565] p:27 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fsrdwr.exe.img
[ 33/565] p:28 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fsscandir01.exe.img
[ 34/565] p:29 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fssymlink.exe.img
[ 35/565] p:30 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: jffs2_fstime.exe.img
[ 36/565] p:31 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mdosfs_fserror.exe.img
[ 37/565] p:32 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mdosfs_fspatheval.exe.img
[ 38/565] p:33 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mdosfs_fsrdwr.exe.img
[ 39/565] p:34 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mdosfs_fsscandir01.exe.img
[ 40/565] p:35 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mdosfs_fsstatvfs.exe.img
[ 41/565] p:36 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mdosfs_fstime.exe.img
[ 42/565] p:37 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fserror.exe.img
[ 43/565] p:38 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fslink.exe.img
[ 44/565] p:39 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fspatheval.exe.img
[ 45/565] p:40 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fspermission.exe.img
[ 46/565] p:41 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fsrdwr.exe.img
[ 47/565] p:42 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fsrename.exe.img
[ 48/565] p:43 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fsscandir01.exe.img
[ 49/565] p:44 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fssymlink.exe.img
[ 50/565] p:45 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mimfs_fstime.exe.img
[ 51/565] p:46 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fserror.exe.img
[ 52/565] p:47 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fsfpathconf.exe.img
[ 53/565] p:48 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fslink.exe.img
[ 54/565] p:49 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fspatheval.exe.img
[ 55/565] p:50 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fspermission.exe.img
[ 56/565] p:51 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fsrdwr.exe.img
[ 57/565] p:52 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fsscandir01.exe.img
[ 58/565] p:53 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fssymlink.exe.img
[ 59/565] p:54 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: mrfs_fstime.exe.img
[ 60/565] p:55 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block01.exe.img
[ 61/565] p:56 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block02.exe.img
[ 62/565] p:57 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block03.exe.img
[ 63/565] p:58 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block04.exe.img
[ 64/565] p:59 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block05.exe.img
[ 65/565] p:60 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block06.exe.img
[ 66/565] p:61 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block07.exe.img
[ 67/565] p:62 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block08.exe.img
[ 68/565] p:63 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block09.exe.img
[ 69/565] p:64 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block10.exe.img
[ 70/565] p:65 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block11.exe.img
[ 71/565] p:66 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block12.exe.img
[ 72/565] p:67 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block13.exe.img
[ 73/565] p:68 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block14.exe.img
[ 74/565] p:69 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block15.exe.img
[ 75/565] p:70 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block16.exe.img
[ 76/565] p:71 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: block17.exe.img
[ 77/565] p:72 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: bspcmdline01.exe.img
[ 78/565] p:73 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: capture01.exe.img
[ 79/565] p:74 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: complex.exe.img
[ 80/565] p:75 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: cpuuse.exe.img
[ 81/565] p:76 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: crypt01.exe.img
[ 82/565] p:77 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: debugger01.exe.img
Result: failed Time: 0:00:08.769559 debugger01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/debugger01/debugger01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 4.2 MiB/s
] done
] Bytes transferred = 78632 (13328 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 78568 Bytes = 76.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** BEGIN OF [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v3.0) ARMv7 [v7, all CP14 registers] breakpoints:5 watchpoints:3
] [CPU:0] rtems-db: sys: : suspending
] [CPU:0] rtems-db: sys: thd: 0A010001: signal: 0
] [CPU:0] rtems-db: test remote: isconnected: connected
] [CPU:0] rtems-db: events running
] TEST DEBUGGER01 ***
] error: rtems-db: remote not [CPU:0] rtems-db: get: 1: + [[ACK?]]
] found: test
] remote: rx: message=0 length=1
] remote[CPU:0] rtems-db: get: 5: xxxxx: rx: +
] remote: rx: message=1 length=5
] remote: rx$ [[junk dropped]]
] rtems-db: get: : $x#aa [[invalid checksum]]
] [CPU:0] rtems-db: put:zu: -
] : xxxxx
] remote: rx: message=2 length=5
] remote: rx: $x#aa
] remote: tx: message=0 length=1
] remote: tx: -
] remote: rx: message=3 length=141
] remote: rx: $qSupported:multiprocess+;swbreak+;hwbreak+;qRelocInsn+;fork-events+;vfork-events[CPU:0] rtems-db: get: 141: $ [[junk dropped]]
] rtems-db: get: : $qSupported:multiprocess+;swbreak+;hwbreak+;qRelocInsn+;fork-events+;vfork-events+;exec-events+;vContSupported+;QThreadEvents+;no-resumed+#df
] [CPU:0] rtems-db: put:zu: +
] +;exec-events+;vContSupported+;QThreadEvents+;no-[CPU:0] rtems-db: put:zu: $qSupported:PacketSize=4096;QNonStop-;multiprocess+;swbreak+;hwbreak-;qRelocInsn-;fork-events-;vfork-events-;exec-events-;vContSupported+;QThreadEvents-;no-resumed+#b3
] resumed+#df
] remote: tx: message=1 length=1
] remote: tx: +
] remote: tx: message=2 length=167
] remote: tx: $qSupported:PacketSize=4096;QNonStop-;multiprocess+;swbreak+;hwbreak-;qRelocInsn-;fork-events-;vfork-events[CPU:0] rtems-db: test remote: isconnected: connected
] -;exec-events-;vContSupported+;QThreadEvents-;no-resumed+#b3
] remot[CPU:0] rtems-db: get: 19: $vMustReplyEmpty#3a
] [CPU:0] rtems-db: put:zu: +
] e: rx: message=4 length=19
] remote: rx: $vMustRe[CPU:0] rtems-db: put:zu: $#00
] plyEmpty#3a
] remote: tx: message=3 length=1
] remot[CPU:0] rtems-db: test remote: isconnected: connected
] e: tx: +
] remote: tx: message=4 length=4
] remot[CPU:0] rtems-db: get: 1: + [[ACK]]
] e: tx: $#00
] remote: rx: message=5 length=1
] remote: rx: [CPU:0] rtems-db: get: 10: $Hgp0.0#ad
] [CPU:0] rtems-db: put:zu: +
] +
] remote: rx: message=6 length=10
] remote: rx:[CPU:0] rtems-db: put:zu: $OK#9a
] $Hgp0.0#ad
] remote: tx: message=5 length=1
] remote:[CPU:0] rtems-db: test remote: isconnected: connected
] tx: +
] remote: tx: message=6 length=6
] remote:[CPU:0] rtems-db: get: 1: + [[ACK]]
] tx: $OK#9a
] remote: rx: message=7 length=1
] remote: rx: +[CPU:0] rtems-db: get: 12: $qTStatus#49
] [CPU:0] rtems-db: put:zu: +
]
] remote: rx: message=8 length=12
] remote: rx: $[CPU:0] rtems-db: put:zu: $#00
] qTStatus#49
] remote: tx: message=7 length=1
] remot[CPU:0] rtems-db: test remote: isconnected: connected
] e: tx: +
] remote: tx: message=8 length=4
] remot[CPU:0] rtems-db: get: 1: + [[ACK]]
] e: tx: $#00
] remote: rx: message=9 length=1
] remote:[CPU:0] rtems-db: get: 5: $?#3f
] [CPU:0] rtems-db: put:zu: +
] rx: +
] remote: rx: message=10 length=5
] remote[CPU:0] rtems-db: put:zu: $T00thread:p1.0a010001;#23
] : rx: $?#3f
] remote: tx: message=9 length=1
] remote: tx: +
] remote: tx: m[CPU:0] rtems-db: test remote: isconnected: connected
] essage=10 length=26
] remote: tx: $T00thread:p1.0a[CPU:0] rtems-db: get: 1: + [[ACK]]
] 010001;#23
] remote: rx: message=11 length=1
] remote: rx: +
] rem[CPU:0] rtems-db: get: 16: $qfThreadInfo#bb
] [CPU:0] rtems-db: put:zu: +
] ote: rx: message=12 length=16
] remote: rx: $qfThr[CPU:0] rtems-db: put:zu: $mp1.0a010001#ef
] eadInfo#bb
] remote: tx: message=11 length=1
] remote: tx: +
] re[CPU:0] rtems-db: test remote: isconnected: connected
] mote: tx: message=12 length=2
] remote: tx: $mp1.0[CPU:0] rtems-db: get: 1: + [[ACK]]
] a010001#ef
] remote: rx: message=13 length=1
] remote: rx: +
] rem[CPU:0] rtems-db: get: 16: $qsThreadInfo#c8
] [CPU:0] rtems-db: put:zu: +
] ote: rx: message=14 length=16
] remote: rx: $qsThr[CPU:0] rtems-db: put:zu: $l#6c
] eadInfo#c8
] remote: tx: message=13 length=1
] remote:[CPU:0] rtems-db: test remote: isconnected: connected
] tx: +
] remote: tx: message=14 length=5
] remote:[CPU:0] rtems-db: get: 1: - [[NACK]]
] [CPU:0] rtems-db: put:zu: $l#6c
] tx: $l#6c
] remote: rx: message=15 length=1
] remote: rx: -
] remote: tx: message=15 length=5
] remote:[CPU:0] rtems-db: get: 1: + [[ACK]]
] tx: $l#6c
] remote: rx: message=16 length=1
] remote: rx: +
] re[CPU:0] rtems-db: get: 15: $qAttached:1#fa
] [CPU:0] rtems-db: put:zu: +
] mote: rx: message=17 length=15
] remote: rx: $qAtt[CPU:0] rtems-db: put:zu: $1#31
] ached:1#fa
] remote: tx: message=16 length=1
] remote:[CPU:0] rtems-db: test remote: isconnected: connected
] tx: +
] remote: tx: message=17 length=5
] remote:[CPU:0] rtems-db: get: 1: + [[ACK]]
] tx: $1#31
] remote: rx: message=18 length=1
] remote: rx[CPU:0] rtems-db: get: 8: $Hc-1#09
] [CPU:0] rtems-db: put:zu: +
] : +
] remote: rx: message=19 length=8
] remote: rx[CPU:0] rtems-db: put:zu: $OK#9a
] : $Hc-1#09
] remote: tx: message=18 length=1
] remote: [CPU:0] rtems-db: test remote: isconnected: connected
] tx: +
] remote: tx: message=19 length=6
] remote: [CPU:0] rtems-db: get: 1: + [[ACK]]
] tx: $OK#9a
] remote: rx: message=20 length=1
] remote: rx: +
] [CPU:0] rtems-db: get: 12: $qOffsets#4b
] [CPU:0] rtems-db: put:zu: +
] remote: rx: message=21 length=12
] remote: rx: $q[CPU:0] rtems-db: put:zu: $#00
] Offsets#4b
] remote: tx: message=20 length=1
] remote[CPU:0] rtems-db: test remote: isconnected: connected
] : tx: +
] remote: tx: message=21 length=4
] remote[CPU:0] rtems-db: get: 1: + [[ACK]]
] : tx: $#00
] remote: rx: message=22 length=1
] remote: [CPU:0] rtems-db: get: 6: $g#67
] [CPU:0] rtems-db: put:zu: +
] rx: +
] remote: rx: message=23 length=6
] remote: + [[extra data: 0x2B]][CPU:0] rtems-db: put:zu: $40f9110040f9110040f9110040f911000c162000783c20000c162000403420000816200000000000c8d711009840200040f91100b88c200015ca100015ca100040f9110040f9110040f9110040f9110040f9110040f9110040f9110040f9110040f9110040f91100#c4
] rx: $g#67+
] remote: tx: message=22 length=1
] remote: tx: +
] remote: tx: message=23 length=2
] remote: tx: $40f9110040f9110040f9110040f911000c162000783c20000c162000403420000816200000000000c8d711009840200040f91100b88c200015ca100015ca100040f9110040f9110040f9110[CPU:0] rtems-db: test remote: isconnected: connected
] 040f9110040f9110040f9110040f9110040f9110040f9110040f9110[CPU:0] rtems-db: get: 7: $D;1#b0
] [CPU:0] rtems-db: put:zu: +
] 0#c4
] remote: rx: message=24 length=7
] remote: r[CPU:0] rtems-db: put:zu: $OK#9a
] x: $D;1#b0
] remote: tx: message=24 length=1
] remote: [CPU:0] rtems-db: test remote: isconnected: connected
] [CPU:0] rtems-db: test remote: disconnect host
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] rtems-db: events finishing
] tx: +
] remote: tx: message=25 length=6
] remote: tx: $OK#9a
] [CPU:0] rtems-db: sys: : resuming
] [CPU:0] rtems-db: sys: : resume: 0x0A010001
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] **
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 83/565] p:77 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: defaultconfig01.exe.img
[ 84/565] p:78 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: devfs01.exe.img
[ 85/565] p:79 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: devfs02.exe.img
[ 86/565] p:80 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: devfs03.exe.img
[ 87/565] p:81 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: devfs04.exe.img
[ 88/565] p:82 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: deviceio01.exe.img
[ 89/565] p:83 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: devnullfatal01.exe.img
[ 90/565] p:84 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: dl01.exe.img
[ 91/565] p:85 f:2 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: dl02.exe.img
Result: timeout Time: 0:02:06.146791 dl02.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dl02/dl02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#######
] 4.4 MiB/s
] done
] Bytes transferred = 97445 (17ca5 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 97381 Bytes = 95.1 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] load: /dl-o1.o
] handle: 0x2173e8 has unresolved externals
] load: /dl-o2.o
] handle: 0x217ce0 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o1.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o2.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] *** TIMEOUT TIMEOUT
[ 92/565] p:85 f:2 u:0 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: dl03.exe.img
[ 93/565] p:86 f:2 u:0 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: dl04.exe.img
[ 94/565] p:87 f:2 u:0 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: dl05.exe.img
[ 95/565] p:88 f:2 u:0 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: dumpbuf01.exe.img
Result: invalid Time: 0:00:23.859291 dumpbuf01.exe.img
] BOOTP broadcast 4
] BOOTP broadcast 5
] BOOTP broadcast 6
] BOOTP broadcast 7
] BOOTP broadcast 8
=> target reset condition detected
] BOOTP broadcast 9
=> target reset: wemo-reset CSEng1 3:
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dumpbuf01/dumpbuf01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (259 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.4 MiB/s
] done
] Bytes transferred = 46835 (b6f3 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46771 Bytes = 45.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] ***Error: length must be greater than zero. BEGIN OF TEST DUMPBUF 1 ***
] ====== Printing 0 Bytes ======
] =====4f |A |
] ==========================
]
] ====== Printing 1 Bytes ======
] =====4f 4f |AB |
] ==========================
]
] ====== Printing 2 Bytes ======
] =====4f 4f 4f |ABC |
] ==========================
]
] ====== Printing 3 Bytes ======
] =====4f 4f 4f 4f |ABCD |
] ==========================
]
] ====== Printing 4 Bytes ======
] =====4f 4f 4f 4f 4f |ABCDE |
] ==========================
]
] ====== Printing 5 Bytes ======
] =====4f 4f 4f 4f 4f 4f |ABCDEF |
] ==========================
]
] ====== Printing 6 Bytes ======
] =====4f 4f 4f 4f 4f 4f 4f |ABCDEFG |
] ==========================
]
] ====== Printing 7 Bytes ======
] =====4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGH |
] ==========================
]
] ====== Printing 8 Bytes ======
] =====4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHI |
] ==========================
]
] ====== Printing 9 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHIJ |
] =========================
]
] ====== Printing 10 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHIJK |
] =========================
]
] ====== Printing 11 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHIJKL |
] =========================
]
] ====== Printing 12 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHIJKLM |
] =========================
]
] ====== Printing 13 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHIJKLMN |
] =========================
]
] ====== Printing 14 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f |ABCDEFGHIJKLMNO |
] =========================
]
] ====== Printing 15 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] =========================
]
] ====== Printing 16 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f |Q |
] =========================
]
] ====== Printing 17 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f |QR |
] =========================
]
] ====== Printing 18 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f |QRS |
] =========================
]
] ====== Printing 19 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f |QRST |
] =========================
]
] ====== Printing 20 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f |QRSTU |
] =========================
]
] ====== Printing 21 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f |QRSTUV |
] =========================
]
] ====== Printing 22 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f |QRSTUVW |
] =========================
]
] ====== Printing 23 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f |QRSTUVWX |
] =========================
]
] ====== Printing 24 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f |QRSTUVWXY |
] =========================
]
] ====== Printing 25 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f |QRSTUVWXYZ |
] =========================
]
] ====== Printing 26 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f |QRSTUVWXYZ0 |
] =========================
]
] ====== Printing 27 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f |QRSTUVWXYZ01 |
] =========================
]
] ====== Printing 28 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f |QRSTUVWXYZ012 |
] =========================
]
] ====== Printing 29 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f |QRSTUVWXYZ0123 |
] =========================
]
] ====== Printing 30 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f |QRSTUVWXYZ01234 |
] =========================
]
] ====== Printing 31 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] =========================
]
] ====== Printing 32 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] 3f |6 |
] =========================
]
] ====== Printing 33 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] 3f 3f |67 |
] =========================
]
] ====== Printing 34 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] 3f 3f 3f |678 |
] =========================
]
] ====== Printing 35 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] 3f 3f 3f 3f |6789 |
] =========================
]
] ====== Printing 36 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] 3f 3f 3f 3f 3f |67890 |
] =========================
]
] ====== Printing 37 Bytes ======
] ======4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 4f 5f |ABCDEFGHIJKLMNOP|
] 5f 5f 5f 5f 5f 5f 5f 5f 5f 5f 3f 3f 3f 3f 3f 3f |QRSTUVWXYZ012345|
] 3f 3f 3f 3f 3f 0f |67890. |
] =========================
]
] ====== Printing 38 Bytes ======
] ======Error: length must be greater than zero.=========================
]
] ====== Printing -1 Bytes ======
] ===============================
]
=> test end: None
] *** END OF TEST DUMPBUF 1 ***
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete..... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (256 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 96/565] p:88 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: exit01.exe.img
[ 97/565] p:89 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: exit02.exe.img
[ 98/565] p:90 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: flashdisk01.exe.img
[ 99/565] p:91 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: gxx01.exe.img
[100/565] p:92 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: heapwalk.exe.img
[101/565] p:93 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: i2c01.exe.img
[102/565] p:94 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: libfdt01.exe.img
[103/565] p:95 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: malloc02.exe.img
[104/565] p:96 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: malloc03.exe.img
[105/565] p:97 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: malloc04.exe.img
[106/565] p:98 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: malloctest.exe.img
[107/565] p:99 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: math.exe.img
[108/565] p:100 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: mathf.exe.img
[109/565] p:101 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: mathl.exe.img
[110/565] p:102 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: md501.exe.img
[111/565] p:103 f:2 u:0 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: monitor.exe.img
[112/565] p:103 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: monitor02.exe.img
[113/565] p:104 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: mouse01.exe.img
[114/565] p:105 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: newlib01.exe.img
[115/565] p:106 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: putenvtest.exe.img
[116/565] p:107 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: pwdgrp01.exe.img
[117/565] p:108 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: pwdgrp02.exe.img
[118/565] p:109 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: rbheap01.exe.img
[119/565] p:110 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: rtmonuse.exe.img
[120/565] p:111 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: sha.exe.img
[121/565] p:112 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: shell01.exe.img
[122/565] p:113 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: sparsedisk01.exe.img
[123/565] p:114 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: spi01.exe.img
[124/565] p:115 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: stackchk.exe.img
[125/565] p:116 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: stackchk01.exe.img
[126/565] p:117 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: stringto01.exe.img
[127/565] p:118 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: tar01.exe.img
[128/565] p:119 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: tar02.exe.img
[129/565] p:120 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: tar03.exe.img
[130/565] p:121 f:2 u:1 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios.exe.img
[131/565] p:121 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios01.exe.img
[132/565] p:122 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios02.exe.img
[133/565] p:123 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios03.exe.img
[134/565] p:124 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios04.exe.img
[135/565] p:125 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios05.exe.img
[136/565] p:126 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios06.exe.img
[137/565] p:127 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios07.exe.img
[138/565] p:128 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios08.exe.img
[139/565] p:129 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: termios09.exe.img
[140/565] p:130 f:2 u:2 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: top.exe.img
[141/565] p:130 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: tztest.exe.img
[142/565] p:131 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: uid01.exe.img
[143/565] p:132 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: utf8proc01.exe.img
[144/565] p:133 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx01.exe.img
[145/565] p:134 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx02.exe.img
[146/565] p:135 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx03.exe.img
[147/565] p:136 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx04.exe.img
[148/565] p:137 f:2 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx05.exe.img
Result: failed Time: 0:00:03.659290 psx05.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psx05/psx05.exe.img
] DHCP client bound to address 10.10.5.202 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 3.7 MiB/s
] done
] Bytes transferred = 62802 (f552 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 62738 Bytes = 61.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSX 5
] *** BEGIN OF TEST PSX 5 ***
] Init's ID is 0x0b010001
] Init: pthread_mutexattr_init - EINVAL (NULL attr)
] Init: pthread_mutexattr_init - SUCCESSFUL
] Init: mutex protocol is (0) -- PTHREAD_PRIO_NONE
] Init: mutex priority ceiling is 2147483647
] Init: mutex process shared is (0) -- PTHREAD_PROCESS_PRIVATE
] Init: pthread_mutexattr_destroy - SUCCESSFUL
] Init: pthread_mutexattr_destroy - EINVAL (NULL attr)
] Init: pthread_mutexattr_destroy - EINVAL (not initialized)
]
] Init: pthread_mutexattr_getpshared - EINVAL (NULL attr)
] Init: pthread_mutexattr_getpshared - EINVAL (NULL pshared)
] Init: pthread_mutexattr_getpshared - EINVAL (not initialized)
] Init: pthread_mutexattr_setpshared - EINVAL (NULL attr)
] Init: pthread_mutexattr_setpshared - EINVAL (not initialized)
]
] Init: pthread_mutexattr_getprotocol - EINVAL (NULL attr)
] Init: pthread_mutexattr_getprotocol - EINVAL (NULL protocol)
] Init: pthread_mutexattr_getprotocol - EINVAL (not initialized)
] Init: pthread_mutexattr_setprotocol - EINVAL (NULL attr)
] Init: pthread_mutexattr_setprotocol - EINVAL (invalid protocol)
] Init: pthread_mutexattr_setprotocol - EINVAL (not initialized)
]
] Init: pthread_mutexattr_getprioceiling - EINVAL (NULL attr)
] Init: pthread_mutexattr_getprioceiling - EINVAL (NULL prioceiling)
] Init: pthread_mutexattr_getprioceiling - EINVAL (not initialized)
] Init: pthread_mutexattr_setprioceiling - EINVAL (NULL attr)
] Init: pthread_mutexattr_setprioceiling - SUCCESSFUL (priority INT_MAX)
] Init: pthread_mutexattr_setprioceiling - SUCCESSFUL (priority INT_MIN)
] Init: pthread_mutexattr_setprioceiling - EINVAL (not initialized)
]
] Task: pthread_mutex_trylock already locked
] Init: pthread_mutex_init - EINVAL (NULL mutex_id)
] status = 0
] Init: pthread_mutex_init - EINVAL (not initialized attr)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psx05/task.c: 36 status == EBUSY
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[149/565] p:137 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx06.exe.img
[150/565] p:138 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx07.exe.img
[151/565] p:139 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx08.exe.img
[152/565] p:140 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx09.exe.img
[153/565] p:141 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx10.exe.img
[154/565] p:142 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx11.exe.img
[155/565] p:143 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx12.exe.img
[156/565] p:144 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx13.exe.img
[157/565] p:145 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx14.exe.img
[158/565] p:146 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx15.exe.img
[159/565] p:147 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psx16.exe.img
[160/565] p:148 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxaio01.exe.img
[161/565] p:149 f:3 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxaio02.exe.img
Result: failed Time: 0:00:03.574518 psxaio02.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psxaio02/psxaio02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (274 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 55330 (d822 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 55266 Bytes = 54 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXAIO 2
] *** BEGIN OF TEST PSXAIO 2 ***
] Init: Open files
] Init: [WQ] aio_write on 1st file
] Init: [WQ] aio_write on 2nd file
] Init: [WQ] aio_read on 2nd file add by priority
] Init: [WQ] aio_write on 3rd file
] Init: [WQ] aio_write on 4th file
] Init: [WQ] aio_write on 5th file -- [WQ] full
] Init: [IQ] aio_write on 6th file
] Init: [IQ] aio_write on 7th file
] Init: [IQ] aio_read on 7th file add by priority
] Init: [WQ] aio_sync on 1st file add by priority
] Init: [NONE] aio_cancel aiocbp=NULL and invalid fildes
] Init: [NONE] aio_cancel aiocbp=NULL valid fildes not in queue
] Init: [WQ] aio_cancel aiocbp=NULL fildes=fd[1]
] Init: [IQ] aio_cancel aiocbp=NULL fildes=fd[6]
] Init: [NONE] aio_cancel aiocbp->aio_fildes != fildes
] Init: [NONE] aio_cancel FD on [IQ], aiocb not on chain
] Init: [IQ] aio_cancel 6th file only one request
] Init: [WQ] aio_cancel 1st file only one request
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psxaio02/init.c: 170 status == AIO_CANCELED
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[162/565] p:149 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxaio03.exe.img
[163/565] p:150 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxalarm01.exe.img
[164/565] p:151 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxautoinit01.exe.img
[165/565] p:152 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxautoinit02.exe.img
[166/565] p:153 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxbarrier01.exe.img
[167/565] p:154 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxcancel.exe.img
[168/565] p:155 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxcancel01.exe.img
[169/565] p:156 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxchroot01.exe.img
[170/565] p:157 f:4 u:3 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: psxclassic01.exe.img
Result: timeout Time: 0:02:06.105714 psxclassic01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psxclassic01/psxclassic01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.6 MiB/s
] done
] Bytes transferred = 49645 (c1ed hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49581 Bytes = 48.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXCLASSIC 1
] *** BEGIN OF TEST PSXCLASSIC 1 ***
] test_task starting...
] test_task waiting for signal...
] Init - pthread_equal on Classic Ids
] Init - pthread_cancel on Classic Task
] test_task starting...
] test_task waiting for signal...
] *** TIMEOUT TIMEOUT
[171/565] p:157 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxcleanup.exe.img
[172/565] p:158 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxcleanup01.exe.img
[173/565] p:159 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxcleanup02.exe.img
[174/565] p:160 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxclock.exe.img
[175/565] p:161 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxclock01.exe.img
[176/565] p:162 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxconcurrency01.exe.img
[177/565] p:163 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxcond01.exe.img
[178/565] p:164 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxcond02.exe.img
[179/565] p:165 f:4 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxconfig01.exe.img
Result: failed Time: 0:00:03.560725 psxconfig01.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psxconfig01/psxconfig01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.3 MiB/s
] done
] Bytes transferred = 55379 (d853 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 55315 Bytes = 54 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXCONFIG 1
] *** BEGIN OF TEST PSXCONFIG 1 ***
] used blocks = 40, largest used block = 12328, used space = 63920
] free blocks = 1, largest free block = 91656, free space = 91656
] object creation done
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psxconfig01/init.c: 209 0
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[180/565] p:165 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxdevctl01.exe.img
[181/565] p:166 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxeintr_join.exe.img
[182/565] p:167 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxenosys.exe.img
[183/565] p:168 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxfatal01.exe.img
[184/565] p:169 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxfatal02.exe.img
[185/565] p:170 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxfchx01.exe.img
[186/565] p:171 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxfile01.exe.img
[187/565] p:172 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxfile02.exe.img
[188/565] p:173 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxfilelock01.exe.img
[189/565] p:174 f:5 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxgetattrnp01.exe.img
Result: failed Time: 0:00:03.064273 psxgetattrnp01.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psxgetattrnp01/psxgetattrnp01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.6 MiB/s
] done
] Bytes transferred = 49741 (c24d hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49677 Bytes = 48.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXGETATTRNP 1
] *** BEGIN OF TEST PSXGETATTRNP 1 ***
] Init - pthread_getattr_np - attr NULL - EINVAL
] Init - pthread_getattr_np - invalid id - ESRCH
] Init - pthread_attr_init
] Init - pthread_attr_setaffinity_np
] Init - pthread_attr_setinheritsched - PTHREAD_EXPLICIT_SCHED
] Init - pthread_attr_setschedpolicy to SCHED_RR
] Init - pthread_attr_setschedparam to minimum priority + 2
] Init - pthread_attr_getstack
] Init - pthread_attr_setstack double the stacksize
] Init - pthread_attr_getguardsize
] Init - pthread_attr_setguardsize double the guardsize
] Init - raise priority to max
] Init - pthread_create
] Init - Lower priority
] Thread - pthread_gÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete. done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
[190/565] p:174 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxgetrusage01.exe.img
[191/565] p:175 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxglobalcon01.exe.img
[192/565] p:176 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxglobalcon02.exe.img
[193/565] p:177 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxid01.exe.img
[194/565] p:178 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psximfs01.exe.img
[195/565] p:179 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psximfs02.exe.img
[196/565] p:180 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxintrcritical01.exe.img
[197/565] p:181 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxitimer.exe.img
[198/565] p:182 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey01.exe.img
[199/565] p:183 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey02.exe.img
[200/565] p:184 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey03.exe.img
[201/565] p:185 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey04.exe.img
[202/565] p:186 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey05.exe.img
[203/565] p:187 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey06.exe.img
[204/565] p:188 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey07.exe.img
[205/565] p:189 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey08.exe.img
[206/565] p:190 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey09.exe.img
[207/565] p:191 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxkey10.exe.img
[208/565] p:192 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmmap01.exe.img
[209/565] p:193 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmount.exe.img
[210/565] p:194 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmsgq01.exe.img
[211/565] p:195 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmsgq02.exe.img
[212/565] p:196 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmsgq03.exe.img
[213/565] p:197 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmsgq04.exe.img
[214/565] p:198 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxmutexattr01.exe.img
[215/565] p:199 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxobj01.exe.img
[216/565] p:200 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxonce01.exe.img
[217/565] p:201 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxpasswd01.exe.img
[218/565] p:202 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxpasswd02.exe.img
[219/565] p:203 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxpipe01.exe.img
[220/565] p:204 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxrdwrv.exe.img
[221/565] p:205 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxreaddir.exe.img
[222/565] p:206 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxrwlock01.exe.img
[223/565] p:207 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsem01.exe.img
[224/565] p:208 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxshm01.exe.img
[225/565] p:209 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxshm02.exe.img
[226/565] p:210 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsignal01.exe.img
[227/565] p:211 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsignal02.exe.img
[228/565] p:212 f:6 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsignal03.exe.img
Result: failed Time: 0:00:05.645249 psxsignal03.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psxsignal03/psxsignal03.exe.img
] DHCP client bound to address 10.10.5.202 (269 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 51743 (ca1f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51679 Bytes = 50.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXSIGNAL 3
] *** BEGIN OF TEST PSXSIGNAL 3 ***
] Init - Variation is: User Signals to Process
] Init - sleep - let threads settle - OK
] SignalNotBlocked - Unblock SIGUSR1
] SignalBlocked - Unblock SIGUSR1
] SignalNotBlocked - Unblock SIGUSR2
] SignalBlocked - Wait for SIGUSR1 unblocked
] SignalNotBlocked - Wait for SIGUSR1 unblocked
] Init - sleep - SignalBlocked thread settle - OK
] Init - sending SIGUSR2 - deliver to one thread
] Init - sending SIGUSR2 - deliver to other thread
] SignalNotBlocked - siginfo.si_signo=26
] Init - sending SIGUSR2 - expect EAGAIN
] SignalNotBlocked - siginfo.si_code=1
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psxsignal03/init.c: 207 sc == -1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[229/565] p:212 f:7 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsignal04.exe.img
Result: failed Time: 0:00:05.669376 psxsignal04.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtests/psxsignal04/psxsignal04.exe.img
] DHCP client bound to address 10.10.5.202 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 51755 (ca2b hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51691 Bytes = 50.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXSIGNAL 4
] *** BEGIN OF TEST PSXSIGNAL 4 ***
] Init - Variation is: Real-Time Signals to Process
] Init - sleep - let threads settle - OK
] SignalNotBlocked - Unblock SIGRTMIN
] SignalBlocked - Unblock SIGRTMIN
] SignalNotBlocked - Unblock SIGRTMAX
] SignalBlocked - Wait for SIGRTMIN unblocked
] SignalNotBlocked - Wait for SIGRTMIN unblocked
] Init - sleep - SignalBlocked thread settle - OK
] Init - sending SIGRTMAX - deliver to one thread
] Init - sending SIGRTMAX - deliver to other thread
] SignalNotBlocked - siginfo.si_signo=31
] Init - sending SIGRTMAX - expect EAGAIN
] SignalNotBlocked - siginfo.si_code=1
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psxsignal04/../psxsignal03/init.c: 207 sc == -1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[230/565] p:212 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsignal05.exe.img
[231/565] p:213 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsignal06.exe.img
[232/565] p:214 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxspin01.exe.img
[233/565] p:215 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxstack01.exe.img
[234/565] p:216 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxstack02.exe.img
[235/565] p:217 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxstat.exe.img
[236/565] p:218 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxstrsignal01.exe.img
[237/565] p:219 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxsysconf.exe.img
[238/565] p:220 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxthreadname01.exe.img
[239/565] p:221 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtime.exe.img
[240/565] p:222 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtimer01.exe.img
[241/565] p:223 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtimer02.exe.img
[242/565] p:224 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtimes01.exe.img
[243/565] p:225 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxualarm.exe.img
[244/565] p:226 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxusleep.exe.img
[245/565] p:227 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmbarrier01.exe.img
[246/565] p:228 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmbarrier02.exe.img
[247/565] p:229 f:8 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmbarrier03.exe.img
Result: failed Time: 0:00:03.184249 psxtmbarrier03.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmbarrier03/psxtmbarrier03.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.2 MiB/s
] done
] Bytes transferred = 47404 (b92c hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47340 Bytes = 46.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMBARRIER 03
] *** BEGIN OF TEST PSXTMBARRIER 03 ***
] pthread_barrier_wait: releasing no preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtmtests/psxtmbarrier03/init.c: 36 FALSE
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[248/565] p:229 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmbarrier04.exe.img
[249/565] p:230 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmclocknanosleep01.exe.img
[250/565] p:231 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmclocknanosleep02.exe.img
[251/565] p:232 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmclocknanosleep03.exe.img
[252/565] p:233 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond01.exe.img
[253/565] p:234 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond02.exe.img
[254/565] p:235 f:9 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond03.exe.img
Result: failed Time: 0:00:04.096676 psxtmcond03.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmcond03/psxtmcond03.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 49158 (c006 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49094 Bytes = 47.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMCOND 03
] *** BEGIN OF TEST PSXTMCOND 03 ***
] pthread_cond_signal: thread waiting no preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/ÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[255/565] p:235 f:10 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond04.exe.img
[256/565] p:236 f:10 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond05.exe.img
[257/565] p:237 f:10 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond06.exe.img
Result: failed Time: 0:00:03.575430 psxtmcond06.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmcond06/psxtmcond06.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 2.2 MiB/s
] done
] Bytes transferred = 49339 (c0bb hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49275 Bytes = 48.1 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMCOND 06
] *** BEGIN OF TEST PSXTMCOND 06 ***
] pthread_cond_broadcast: threads waiting no preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[258/565] p:237 f:11 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond07.exe.img
Result: failed Time: 0:00:03.730277 psxtmcond07.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmcond07/psxtmcond07.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.1 MiB/s
] done
] Bytes transferred = 48979 (bf53 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48915 Bytes = 47.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMCOND 07
] *** BEGIN OF TEST PSXTMCOND 07 ***
] pthread_cond_broadcast: threads waiting, preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/sÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[259/565] p:237 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond08.exe.img
[260/565] p:238 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond09.exe.img
[261/565] p:239 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmcond10.exe.img
[262/565] p:240 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmkey01.exe.img
[263/565] p:241 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmkey02.exe.img
[264/565] p:242 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmq01.exe.img
[265/565] p:243 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex01.exe.img
[266/565] p:244 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex02.exe.img
[267/565] p:245 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex03.exe.img
[268/565] p:246 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex04.exe.img
[269/565] p:247 f:12 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex05.exe.img
Result: failed Time: 0:00:03.643484 psxtmmutex05.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmmutex05/psxtmmutex05.exe.img
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 47982 (bb6e hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47918 Bytes = 46.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMMUTEX 05
] *** BEGIN OF TEST PSXTMMUTEX 05 ***
] pthread_mutex_unlock: unblocking no preemption - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtmtests/psxtmmutex05/init.c: 36 FALSE
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[270/565] p:247 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex06.exe.img
[271/565] p:248 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmmutex07.exe.img
[272/565] p:249 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmnanosleep01.exe.img
[273/565] p:250 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmnanosleep02.exe.img
[274/565] p:251 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock01.exe.img
[275/565] p:252 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock02.exe.img
[276/565] p:253 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock03.exe.img
[277/565] p:254 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock04.exe.img
[278/565] p:255 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock05.exe.img
[279/565] p:256 f:13 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock06.exe.img
Result: failed Time: 0:00:03.748082 psxtmrwlock06.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (269 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmrwlock06/psxtmrwlock06.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47609 (b9f9 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47545 Bytes = 46.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMRWLOCK 06
] *** BEGIN OF TEST PSXTMRWLOCK 06 ***
] pthread_rwlock_unlock: thread waiting no preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtmtests/psxtmrwlock06/init.c: 36 FALSE
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[280/565] p:256 f:14 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmrwlock07.exe.img
Result: failed Time: 0:00:03.120146 psxtmrwlock07.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmrwlock07/psxtmrwlock07.exe.img
] DHCP client bound to address 10.10.5.202 (271 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47893 (bb15 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47829 Bytes = 46.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMRWLOCK 07
] *** BEGIN OF TEST PSXTMRWLOCK 07 ***
] pthread_rwlock_unlock: thread waiting preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/srÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[281/565] p:256 f:15 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsem01.exe.img
[282/565] p:257 f:15 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsem02.exe.img
[283/565] p:258 f:15 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsem03.exe.img
[284/565] p:259 f:15 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsem04.exe.img
Result: failed Time: 0:00:03.646519 psxtmsem04.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmsem04/psxtmsem04.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47477 (b975 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47413 Bytes = 46.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMSEM 04
] *** BEGIN OF TEST PSXTMSEM 04 ***
] sem_post: thread waiting no preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtmtests/psxtmsem04/init.c: 40 FALSE
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[285/565] p:259 f:16 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsem05.exe.img
Result: failed Time: 0:00:03.135784 psxtmsem05.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/psxtmtests/psxtmsem05/psxtmsem05.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47768 (ba98 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47704 Bytes = 46.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXTMSEM 05
] *** BEGIN OF TEST PSXTMSEM 05 ***
] sem_post: thread waiting preempt - 0
] /opt/work/chris/rtems/kernel/rtems.git/c/ÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[286/565] p:259 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsleep01.exe.img
[287/565] p:260 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmsleep02.exe.img
[288/565] p:261 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmthread01.exe.img
[289/565] p:262 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmthread02.exe.img
[290/565] p:263 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmthread03.exe.img
[291/565] p:264 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmthread04.exe.img
[292/565] p:265 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmthread05.exe.img
[293/565] p:266 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: psxtmthread06.exe.img
[294/565] p:267 f:17 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: rhdeadlockbrk.exe.img
Result: failed Time: 0:00:03.160415 rhdeadlockbrk.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/rhealstone/rhdeadlockbrk/rhdeadlockbrk.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 48251 (bc7b hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48187 Bytes = 47.1 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: RHDEADLOCKBRK
] *** BEGIN OF TEST RHDEADLOCKBRK ***
] Rhÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[295/565] p:267 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: rhilatency.exe.img
[296/565] p:268 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: rhmlatency.exe.img
[297/565] p:269 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: rhsemshuffle.exe.img
[298/565] p:270 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: rhtaskpreempt.exe.img
[299/565] p:271 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: rhtaskswitch.exe.img
[300/565] p:272 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: base_sp.exe.img
[301/565] p:273 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: capture.exe.img
[302/565] p:274 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: cdtest.exe.img
[303/565] p:275 f:18 u:3 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: fileio.exe.img
[304/565] p:275 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: hello.exe.img
[305/565] p:276 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: cxx_iostream.exe.img
[306/565] p:277 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: minimum.exe.img
[307/565] p:278 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: nsecs.exe.img
[308/565] p:279 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: paranoia.exe.img
[309/565] p:280 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: ticker.exe.img
[310/565] p:281 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: unlimited.exe.img
[311/565] p:282 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp01.exe.img
[312/565] p:283 f:18 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp02.exe.img
Result: failed Time: 0:00:04.166837 sp02.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp02/sp02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 50440 (c508 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50376 Bytes = 49.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 2
] *** BEGIN OF TEST SP 2 ***
] INIT - rtems_task_wake_after - yielding processor
] PREEMPT - rtems_task_delete - deleting self
]
] rtems_task_create of TA3 FAILED -- expected (RTEMS_SUCCESSFUL) got (RTEMS_TOO_MANY)
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[313/565] p:283 f:19 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp03.exe.img
[314/565] p:284 f:19 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp04.exe.img
[315/565] p:285 f:19 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp05.exe.img
[316/565] p:286 f:19 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp06.exe.img
Result: failed Time: 0:00:04.109419 sp06.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp06/sp06.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 49231 (c04f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49167 Bytes = 48 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 6
] *** BEGIN OF TEST SP 6 ***
] TA1 - is beginning to run
] TA1 - restarting TA3
] TA2 - is beginning to run
]
] rtems_task_restart of TA3 FAILED -- expected (RTEMS_SUCCESSFUL) got (RTEMS_INVALID_ID)
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[317/565] p:286 f:20 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: sp07.exe.img
Result: timeout Time: 0:02:07.038086 sp07.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp07/sp07.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.3 MiB/s
] done
] Bytes transferred = 52034 (cb42 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51970 Bytes = 50.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 7
] *** BEGIN OF TEST SP 7 ***
] rtems_extension_create - bad id pointer -- RTEMS_INVALID_ADDRESS
] rtems_extension_create - bad name -- RTEMS_INVALID_NAME
] rtems_extension_create - first one -- OK
] rtems_extension_create - second one-- OK
] rtems_extension_create -- RTEMS_TOO_MANY
] rtems_extension_delete - second one -- OK
] rtems_extension_delete - second one again -- RTEMS_INVALID_ID
] rtems_extension_ident -- OK
] rtems_extension_ident - bad name -- RTEMS_INVALID_NAME
] rtems_extension_ident - bad name -- RTEMS_INVALID_ADDRESS
] rtems_extension_create - harmless -- OK
] <pause>
] TA2 - rtems_task_set_priority - set TA1's priority: 03
] TA1 - rtems_task_set_priority - get initial priority of self: 04
] TA2 - rtems_task_set_priority - set TA1's priority: 02
] TA1 - rtems_task_set_priority - set TA2's priority: 03
] TA2 - rtems_task_set_priority - set TA1's priority: 01
] TA1 - rtems_task_set_priority - set TA2's priority: 02
] TA2 - rtems_task_suspend - suspend TA1
] *** TIMEOUT TIMEOUT
[318/565] p:286 f:20 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp08.exe.img
[319/565] p:287 f:20 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp11.exe.img
[320/565] p:288 f:20 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp12.exe.img
[321/565] p:289 f:20 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp13.exe.img
Result: failed Time: 0:00:03.661161 sp13.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp13/sp13.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 56120 (db38 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 56056 Bytes = 54.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 13
] *** BEGIN OF TEST SP 13 ***
] TA1 - rtems_message_queue_ident - qid => 22010001
] TA2 - rtems_message_queue_receive - receive from queue 1 - RTEMS_NO_WAIT
] TA3 - rtems_message_queue_receive - receive from queue 2 - RTEMS_WAIT FOREVER
] TA1 - rtems_message_queue_send - BUFFER 1 TO Q 1
]
] rtems_message_queue_receive FAILED -- expected (RTEMS_SUCCESSFUL) got (RTEMS_UNSATISFIED)
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[322/565] p:289 f:21 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp14.exe.img
[323/565] p:290 f:21 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp15.exe.img
[324/565] p:291 f:21 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp16.exe.img
Result: failed Time: 0:00:04.105645 sp16.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp16/sp16.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 53926 (d2a6 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 53862 Bytes = 52.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 16
] *** BEGIN OF TEST SP 16 ***
] TA1 - rtems_region_ident - rnid => 32010001
] TA2 - rtems_region_get_segment - wait on 2K segment from region 1
] TA3 - rtems_region_get_segment - wait on 3750 byte segment from region 2
] TA1 - rtems_region_get_segment - wait on 1000 byte segment from region 2
] TA2 - got segment from region 1 - TA3 - got segment from region 2 - 0x000000400x00000040
]
] TA2 - rtems_region_return_segment - return segment to region 1 - TA3 -
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[325/565] p:291 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp17.exe.img
[326/565] p:292 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp18.exe.img
[327/565] p:293 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp19.exe.img
[328/565] p:294 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp20.exe.img
[329/565] p:295 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp2038.exe.img
[330/565] p:296 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp21.exe.img
[331/565] p:297 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp22.exe.img
[332/565] p:298 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp23.exe.img
[333/565] p:299 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp24.exe.img
[334/565] p:300 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp25.exe.img
[335/565] p:301 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp26.exe.img
[336/565] p:302 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp27.exe.img
[337/565] p:303 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp27a.exe.img
[338/565] p:304 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp29.exe.img
[339/565] p:305 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp30.exe.img
[340/565] p:306 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp31.exe.img
[341/565] p:307 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp32.exe.img
[342/565] p:308 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp33.exe.img
[343/565] p:309 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp34.exe.img
[344/565] p:310 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp35.exe.img
[345/565] p:311 f:22 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp37.exe.img
Result: failed Time: 0:00:04.216937 sp37.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp37/sp37.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 52898 (cea2 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 52834 Bytes = 51.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 37
] *** BEGIN OF TEST SP 37 ***
] clock_tick from task level
] Blocking task... suspending self
] clock_tick from task level with preempt -- OK
] interru
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[346/565] p:311 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp38.exe.img
[347/565] p:312 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp40.exe.img
[348/565] p:313 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp41.exe.img
[349/565] p:314 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp42.exe.img
[350/565] p:315 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp43.exe.img
[351/565] p:316 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp44.exe.img
[352/565] p:317 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp45.exe.img
[353/565] p:318 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp46.exe.img
[354/565] p:319 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp47.exe.img
[355/565] p:320 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp48.exe.img
[356/565] p:321 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp49.exe.img
[357/565] p:322 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp50.exe.img
[358/565] p:323 f:23 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp51.exe.img
Result: failed Time: 0:00:03.111441 sp51.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp51/sp51.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 46965 (b775 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46901 Bytes = 45.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/sp51/init.c: 41 sc == RTEMS_SUCCESSFUL
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[359/565] p:323 f:24 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp52.exe.img
[360/565] p:324 f:24 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp53.exe.img
[361/565] p:325 f:24 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: sp54.exe.img
Result: invalid Time: 0:00:06.729807 sp54.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp54/sp54.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 5.6 MiB/s
] done
] Bytes transferred = 46564 (b5e4 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46500 Bytes = 45.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (257 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[362/565] p:325 f:24 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: sp55.exe.img
[363/565] p:326 f:24 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: sp56.exe.img
[364/565] p:327 f:24 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: sp57.exe.img
[365/565] p:328 f:24 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: sp58.exe.img
[366/565] p:329 f:24 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: sp59.exe.img
Result: timeout Time: 0:02:06.063312 sp59.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp59/sp59.exe.img
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 48713 (be49 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48649 Bytes = 47.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 59
] *** BEGIN OF TEST SP 59 ***
] Init - blocking task priority will be 220
] Init - rtems_task_create - delay task - OK
] Init - rtems_task_start - delay task - OK
] Init - rtems_region_create - OK
] Blocking_task - wait for memory
] Init - rtems_region_get_segment - get segment to consume memory
] Blocking_task - Got memory segment after freed
] Blocking_task - delete self
] *** TIMEOUT TIMEOUT
[367/565] p:329 f:24 u:4 e:0 I:0 B:3 t:4 i:2 | arm/xilinx_zynq_zedboard: sp60.exe.img
[368/565] p:330 f:24 u:4 e:0 I:0 B:3 t:4 i:2 | arm/xilinx_zynq_zedboard: sp62.exe.img
Result: failed Time: 0:00:07.738990 sp62.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp62/sp62.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 49508 (c164 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49444 Bytes = 48.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 62
] *** BEGIN OF TEST SP 62 ***
] Init - rtems_task_create Blocker - OK
] Init - rtems_task_start Blocker - OK
] Init - rtems_task_create Region - OK
] Blocker - rtems_region_get_segment - OK
] Init - rtems_region_get_segment - OK
] Blocker - Got memory after resize
] Init - sleep 1 second for Blocker - OK
] Init - sleep 1 second for Blocker to run again - OK
] Init - failed to resize and unblock a task
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[369/565] p:330 f:25 u:4 e:0 I:0 B:3 t:4 i:2 | arm/xilinx_zynq_zedboard: sp63.exe.img
[370/565] p:331 f:25 u:4 e:0 I:0 B:3 t:4 i:2 | arm/xilinx_zynq_zedboard: sp64.exe.img
[371/565] p:332 f:25 u:4 e:0 I:0 B:3 t:4 i:2 | arm/xilinx_zynq_zedboard: sp65.exe.img
Result: timeout Time: 0:02:04.006910 sp65.exe.img
] ....... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] *** TIMEOUT TIMEOUT
] ethernet at e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
[372/565] p:332 f:25 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp66.exe.img
Result: failed Time: 0:00:07.731775 sp66.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp66/sp66.exe.img
] DHCP client bound to address 10.10.5.202 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 48898 (bf02 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48834 Bytes = 47.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 66
] *** BEGIN OF TEST SP 66 ***
] Creating semaphore
] Calling rtems_semaphore_obtain
] Calling rtems_task_create
] Calling rtems_task_start
] Init Task_1: Obtaining semaphore
] Ca
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[373/565] p:332 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp67.exe.img
[374/565] p:333 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp68.exe.img
[375/565] p:334 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp69.exe.img
[376/565] p:335 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp70.exe.img
[377/565] p:336 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp71.exe.img
[378/565] p:337 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp72.exe.img
[379/565] p:338 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp73.exe.img
[380/565] p:339 f:26 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp74.exe.img
Result: failed Time: 0:00:03.685991 sp74.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp74/sp74.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 46455 (b577 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46391 Bytes = 45.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 74
] *** BEGIN OF TEST SP 74 ***
] Create TA1 at higher priority task
] Yield to TA1
] Successfully yie
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[381/565] p:339 f:27 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp75.exe.img
[382/565] p:340 f:27 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp76.exe.img
Result: failed Time: 0:00:03.681497 sp76.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp76/sp76.exe.img
] DHCP client bound to address 10.10.5.202 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 47471 (b96f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47407 Bytes = 46.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP 76
] *** BEGIN OF TEST SP 76 ***
] Set Init task priority = 2
] Create TA1 at higher priority task
] Create TA2 at equal priority task
] TYield to TA1
] A/opt/work/chris/rtems/kerneÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[383/565] p:340 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sp77.exe.img
[384/565] p:341 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spassoc01.exe.img
[385/565] p:342 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spatomic01.exe.img
[386/565] p:343 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcache01.exe.img
[387/565] p:344 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcbssched01.exe.img
[388/565] p:345 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcbssched02.exe.img
[389/565] p:346 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcbssched03.exe.img
[390/565] p:347 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spchain.exe.img
[391/565] p:348 f:28 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spclock_err01.exe.img
Result: failed Time: 0:00:03.620615 spclock_err01.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spclock_err01/spclock_err01.exe.img
] DHCP client bound to address 10.10.5.121 (257 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 50698 (c60a hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50634 Bytes = 49.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP CLOCK ERROR 2
] *** BEGIN OF TEST SP CLOCK ERROR 2 ***
] TA1 - rtems_clock_get_tod - RTEMS_INVALID_ADDRESS
] TA1 - rtems_clock_get_tod - RTEMS_NOT_DEFINED
] TA1 - rtems_clock_get_seconds_since_epoch - RTEMS_INVALID_ADDRESS
] TA1 - rtems_clock_get_seconds_since_epoch - RTEMS_NOT_DEFINED
] TA1 - rtems_clock_get_uptime - RTEMS_INVALID_ADDRESS
] TA1 - rtems_clock_get_uptime_timeval
] TA1 - rtems_clock_get_uptime_seconds
] TA1 - rtems_clock_get_uptime_nanoseconds
] TA1 - rtems_clock_get_tod_timeval - RTEMS_INVALID_ADDRESS
] TA1 - rtems_clock_get_tod_timeval - RTEMS_NOT_DEFINED
] TA1 - rtems_clock_set - RTEMS_INVALID_ADDRESS
] TA1 - rtems_clock_set - 08:30:45 02/05/1987 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 08:30:45 15/05/1988 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 08:30:45 02/32/1988 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 25:30:45 02/05/1988 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 08:61:45 02/05/1988 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 08:30:61 02/05/1988 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 08:30:45 02/05/1988 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_set - 08:30:45 02/05/1988 - RTEMS_SUCCESSFUL
] TA1 - current time -
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[392/565] p:348 f:29 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spclock_err02.exe.img
Result: failed Time: 0:00:14.389435 spclock_err02.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spclock_err02/spclock_err02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 49793 (c281 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49729 Bytes = 48.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPCLOCK_ERR 2
] *** BEGIN OF TEST SPCLOCK_ERR 2 ***
] TA1 - rtems_io_close - RTEMS_INVALID_NUMBER
] TA1 - rtems_io_control - RTEMS_INVALID_NUMBER
] TA1 - rtems_io_initialize - RTEMS_INVALID_NUMBER
] TA1 - rtems_io_open - RTEMS_INVALID_NUMBER
] TA1 - rtems_io_read - RTEMS_INVALID_NUMBER
] TA1 - rtems_io_write - RTEMS_INVALID_NUMBER
] TA1 - rtems_clock_set - 23:59:59 12/31/2000 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 23:59:59 12/31/2000 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/1999 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 23:59:59 12/31/1999 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/2100 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 23:59:59 12/31/2100 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/2099 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 23:59:59 12/31/2099 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 23:59:59 12/31/1991 - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_get_tod - 23:59:59 12/3
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[393/565] p:348 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcontext01.exe.img
[394/565] p:349 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcoverage.exe.img
[395/565] p:350 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcpucounter01.exe.img
[396/565] p:351 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spcpuset01.exe.img
[397/565] p:352 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spedfsched01.exe.img
[398/565] p:353 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spedfsched02.exe.img
[399/565] p:354 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spedfsched03.exe.img
[400/565] p:355 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spedfsched04.exe.img
[401/565] p:356 f:30 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sperror01.exe.img
Result: failed Time: 0:00:04.145357 sperror01.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sperror01/sperror01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 4.4 MiB/s
] done
] Bytes transferred = 59334 (e7c6 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 59270 Bytes = 57.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPERROR 1
] *** BEGIN OF TEST SPERROR 1 ***
] Dummy: Resources unavailable (unknown errno=-1)
] Dummy: Resources unaDummy: causing panic.. will print test end message, then...
] print various error messages
] vailable (status: RTEMS_NO_MEMORY) (errno: Not enough space)
=> test end: SPERROR 1
] Dummy: Resources u*** END OF TEST SPERROR 1 ***
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[402/565] p:356 f:31 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sperror02.exe.img
Result: failed Time: 0:00:03.700859 sperror02.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sperror02/sperror02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 3.8 MiB/s
] done
] Bytes transferred = 59224 (e758 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 59160 Bytes = 57.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPERROR 2
] *** BEGIN OF TEST SPERROR 2 ***
=> test end: SPERROR 2
] Dummy: Resources un*** END OF TEST SPERROR 2 ***
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[403/565] p:356 f:32 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: sperror03.exe.img
Result: failed Time: 0:00:03.654839 sperror03.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sperror03/sperror03.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 3.5 MiB/s
] done
] Bytes transferred = 59137 (e701 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 59073 Bytes = 57.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPERROR 3
] *** BEGIN OF TEST SPERROR 3 ***
=> test end: SPERROR 3
] D*** END OF TEST SPERROR 3 ***
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[404/565] p:356 f:33 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spevent_err03.exe.img
Result: failed Time: 0:00:11.748745 spevent_err03.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spevent_err03/spevent_err03.exe.img
] DHCP client bound to address 10.10.5.121 (270 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.2 MiB/s
] done
] Bytes transferred = 57499 (e09b hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 57435 Bytes = 56.1 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP EVENT ERROR 3
] *** BEGIN OF TEST SP EVENT ERROR 3 ***
] TA1 - rtems_event_receive - NULL param - RTEMS_INVALID_ADDRESS
] TA1 - rtems_event_receive - RTEMS_UNSATISFIED ( all conditions )
] TA1 - rtems_event_receive - RTEMS_UNSATISFIED ( any condition )
] TA1 - rtems_event_receive - timeout in 3 seconds
] TA1 - rtems_event_receive - woke up with RTEMS_TIMEOUT
] TA1 - rtems_event_send - RTEMS_INVALID_ID
] TA1 - rtems_task_wake_after - sleep 1 second - RTEMS_SUCCESSFUL
] TA1 - rtems_clock_set - 08:30:45 02/05/1988 - RTEMS_SUCCESSFUL
] TA1 - current time - Fri
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[405/565] p:356 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: speventsystem01.exe.img
[406/565] p:357 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: speventtransient01.exe.img
[407/565] p:358 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spextensions01.exe.img
[408/565] p:359 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal01.exe.img
[409/565] p:360 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal02.exe.img
[410/565] p:361 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal03.exe.img
[411/565] p:362 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal04.exe.img
[412/565] p:363 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal05.exe.img
[413/565] p:364 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal06.exe.img
[414/565] p:365 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal07.exe.img
[415/565] p:366 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal08.exe.img
[416/565] p:367 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal09.exe.img
[417/565] p:368 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal10.exe.img
[418/565] p:369 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal11.exe.img
[419/565] p:370 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal12.exe.img
[420/565] p:371 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal13.exe.img
[421/565] p:372 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal14.exe.img
[422/565] p:373 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal15.exe.img
[423/565] p:374 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal16.exe.img
[424/565] p:375 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal17.exe.img
[425/565] p:376 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal18.exe.img
[426/565] p:377 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal19.exe.img
[427/565] p:378 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal20.exe.img
[428/565] p:379 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal24.exe.img
[429/565] p:380 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal25.exe.img
[430/565] p:381 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal26.exe.img
[431/565] p:382 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal27.exe.img
[432/565] p:383 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal28.exe.img
[433/565] p:384 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal29.exe.img
[434/565] p:385 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal30.exe.img
[435/565] p:386 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfatal31.exe.img
[436/565] p:387 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfifo01.exe.img
[437/565] p:388 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfifo02.exe.img
[438/565] p:389 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfifo03.exe.img
[439/565] p:390 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfifo04.exe.img
[440/565] p:391 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfifo05.exe.img
[441/565] p:392 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spfreechain01.exe.img
[442/565] p:393 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spglobalcon01.exe.img
[443/565] p:394 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spheapprot.exe.img
[444/565] p:395 f:34 u:4 e:0 I:0 B:3 t:5 i:2 | arm/xilinx_zynq_zedboard: spinternalerror01.exe.img
Result: invalid Time: 0:00:07.180382 spinternalerror01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (264 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01/spinternalerror01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 3.2 MiB/s
] done
] Bytes transferred = 20236 (4f0c hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 20172 Bytes = 19.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4¡*‚8 €”˜PA €" 1*¥¡*”˜PA €" 1*¥¡¨¨ø
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[445/565] p:395 f:34 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spinternalerror02.exe.img
[446/565] p:396 f:34 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintr_err01.exe.img
Result: failed Time: 0:00:04.095948 spintr_err01.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintr_err01/spintr_err01.exe.img
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 46191 (b46f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46127 Bytes = 45 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP INTERRUPT ERROR 1
] *** BEGIN OF TEST SP INTERRUPT ERROR 1 ***
] TA1 - rtems_interrupt_catch - bad handler RTEMS_INVALID_ADDRESS -- SKIPPED
] TA1 - rtems_interrupt_catch - old isr RTEMS_INVALID
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[447/565] p:396 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical01.exe.img
[448/565] p:397 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical02.exe.img
[449/565] p:398 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical03.exe.img
[450/565] p:399 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical04.exe.img
[451/565] p:400 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical05.exe.img
[452/565] p:401 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical06.exe.img
[453/565] p:402 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical07.exe.img
[454/565] p:403 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical08.exe.img
[455/565] p:404 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical09.exe.img
[456/565] p:405 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical10.exe.img
[457/565] p:406 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical11.exe.img
[458/565] p:407 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical12.exe.img
[459/565] p:408 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical13.exe.img
[460/565] p:409 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical14.exe.img
[461/565] p:410 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical15.exe.img
[462/565] p:411 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical16.exe.img
[463/565] p:412 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical18.exe.img
[464/565] p:413 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical20.exe.img
[465/565] p:414 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical21.exe.img
[466/565] p:415 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical22.exe.img
[467/565] p:416 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical23.exe.img
[468/565] p:417 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spintrcritical24.exe.img
[469/565] p:418 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: splinkersets01.exe.img
[470/565] p:419 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spmkdir.exe.img
[471/565] p:420 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spmountmgr01.exe.img
[472/565] p:421 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spmrsp01.exe.img
[473/565] p:422 f:35 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spmsgq_err01.exe.img
Result: failed Time: 0:00:10.287080 spmsgq_err01.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spmsgq_err01/spmsgq_err01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 51505 (c931 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51441 Bytes = 50.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP MESSAGE QUEUE ERROR 1
] *** BEGIN OF TEST SP MESSAGE QUEUE ERROR 1 ***
] TA1 - rtems_message_queue_broadcast - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_create - NULL Id - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_create - count = 0 - RTEMS_INVALID_NUMBER
] TA1 - rtems_message_queue_create - size = 0 - RTEMS_INVALID_SIZE
] TA1 - rtems_message_queue_create - Q 1 - RTEMS_INVALID_NAME
] TA1 - rtems_message_queue_create - Q 1 - RTEMS_MP_NOT_CONFIGURED
] TA1 - rtems_message_queue_create - Q 2 - RTEMS_UNSATISFIED
] TA1 - rtems_message_queue_create - Q 2 - RTEMS_UNSATISFIED #2
] TA1 - rtems_message_queue_create - Q 1 - 2 DEEP - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_create - Q 2 - RTEMS_TOO_MANY
] TA1 - rtems_message_queue_delete - unknown RTEMS_INVALID_ID
] TA1 - rtems_message_queue_delete - local RTEMS_INVALID_ID
] TA1 - rtems_message_queue_ident - RTEMS_INVALID_NAME
] TA1 - rtems_message_queue_get_number_pending - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_get_number_pending - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_flush - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_flush - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_receive - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_receive - Q 1 - RTEMS_INVALID_ADDRESS NULL buffer
] TA1 - rtems_message_queue_receive - Q 1 - RTEMS_INVALID_ADDRESS NULL size
] TA1 - rtems_message_queue_receive - Q 1 - RTEMS_UNSATISFIED
] TA1 - rtems_message_queue_receive - Q 1 - timeout in 3 seconds
] TA1 - rtems_message_queue_receive - Q 1 - woke up with RTEMS_TIMEOUT
] TA1 - rtems_message_queue_send - NULL buffer - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_send - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_send - BUFFER 1 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 2 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 3 TO Q 1 - RTEMS_TOO_MANY
] TA1 - rtems_message_queue_urgent - NULL buffer - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_urgent - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_broadcast - NULL buffer - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_broadcast - too large - RTEMS_INVALID_SIZE
] TA1 - rtems_message_queue_broadcast - NULL count - RTEMS_I
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[474/565] p:422 f:36 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spmsgq_err02.exe.img
Result: failed Time: 0:00:04.129993 spmsgq_err02.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (264 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spmsgq_err02/spmsgq_err02.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 8 MiB/s
] done
] Bytes transferred = 50092 (c3ac hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50028 Bytes = 48.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP MESSAGE QUEUE ERROR 2
] *** BEGIN OF TEST SP MESSAGE QUEUE ERROR 2 ***
] TA1 - rtems_task_create - TA3 created - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_create - Q 1 - 2 DEEP - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_delete - Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_create - Q 1 - 2 DEEP - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 1 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 2 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 3 TO Q 1 - RTEMS_TOO_MANY
] TA1 - rtems_message_queue_delete - Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_create - Q 1 - 3 DEEP - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 1 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 2 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 3 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 4 TO Q 1 - RTEMS_TOO_MANY
] TA1 - rtems_message_queue_delete - Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_create - Q 1 - 3 DEEP - RTEMS_SUCCESSFUL
] TA1 - rtems_task_start - start TA3 - RTEMS_SUCCESSFUL
] TA1 - rtems_task_wake_after - yield processor - RTEMS_SUCCESSFUL
] TA3 - rtems_message_queue_receive - Q 1 - RTEMS_WAIT FOREVER
] TA1 - rtems_message_queue_delete - delete Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_task_wake_after - yield processor - RTEMS_SUCCESSFUL
] TA3 - rtems_message_queue_receive - woke up with RTEMS_OBJE
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[475/565] p:422 f:37 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spmutex01.exe.img
[476/565] p:423 f:37 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spnsext01.exe.img
[477/565] p:424 f:37 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spobjgetnext.exe.img
[478/565] p:425 f:37 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: sppagesize.exe.img
[479/565] p:426 f:37 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: sppartition_err01.exe.img
[480/565] p:427 f:37 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spport_err01.exe.img
Result: failed Time: 0:00:03.681980 spport_err01.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spport_err01/spport_err01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 48546 (bda2 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48482 Bytes = 47.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP PORT ERROR 01
] *** BEGIN OF TEST SP PORT ERROR 01 ***
] TA1 - rtems_port_create - RTEMS_INVALID_NAME
] TA1 - rtems_port_create - bad range - RTEMS_INVALID_ADDRESS
] TA1 - rtems_port_create - null id - RTEMS_INVALID_ADDRESS
] TA1 - rtems_port_create - RTEMS_TOO_MANY
] TA1 - rtems_port_delete - RTEMS_INVALID_ID
] TA1 - rtems_port_ident - RTEMS_INVALID_NAME
] TA1 - rtems_port_external_to_internal - RTEMS_INVALID_ADDRESS
] TA1 - rtems_port_internal_to_external - RTEMS_INVALID_ID
] TA1 - rtems_port_external_to_internal -
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[481/565] p:427 f:38 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spprintk.exe.img
[482/565] p:428 f:38 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spprivenv01.exe.img
[483/565] p:429 f:38 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spprofiling01.exe.img
[484/565] p:430 f:38 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spqreslib.exe.img
[485/565] p:431 f:38 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spratemon_err01.exe.img
Result: failed Time: 0:00:07.687328 spratemon_err01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (269 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spratemon_err01/spratemon_err01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 51522 (c942 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 51458 Bytes = 50.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP RATE MONOTONIC ERROR 01
] *** BEGIN OF TEST SP RATE MONOTONIC ERROR 01 ***
] TA1 - rtems_task_create - 4 created - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_create - RTEMS_INVALID_ADDRESS
] TA1 - rtems_rate_monotonic_create - RTEMS_INVALID_NAME
] TA1 - rtems_rate_monotonic_create - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_create - RTEMS_TOO_MANY
] TA1 - rtems_rate_monotonic_ident - RTEMS_INVALID_NAME
] TA1 - rtems_rate_monotonic_period - RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_period - local RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_period(RTEMS_PERIOD_STATUS) - RTEMS_NOT_DEFINED
] TA1 - rtems_rate_monotonic_period - 100 ticks - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_period(RTEMS_PERIOD_STATUS) - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_period(RTEMS_PERIOD_STATUS) - RTEMS_TIMEOUT
] TA1 - rtems_rate_monotonic_get_statistics - RTEMS_INVALID_ADDRESS
] TA1 - rtems_rate_monotonic_get_status - RTEMS_INVALID_ADDRESS
] TA1 - rtems_rate_monotonic_get_status - RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_cancel - RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_cancel - local RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_cancel - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_period - 5 ticks - RTEMS_TIMEOUT
] TA1 - yielding to TA4
] TA4 - rtems_rate_monotonic_cancel - RTEMS_NOT_OWNER_OF_RESOURCE
] TA1 - rtems_rate_monotonic_delete - RTEMS_INVALID_ID
] TA4 - rtems_rate_monotonic_period - RTEMS_NOT_OWNER_OF_RESOURCE
] TA1 - rtems_rate_monotonic_delete - local RTEMS_INVALID_ID
] TA4 - rtems_task_delete - delete self - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_delete - RTEM
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[486/565] p:431 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: sprbtree01.exe.img
[487/565] p:432 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spregion_err01.exe.img
[488/565] p:433 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: sprmsched01.exe.img
[489/565] p:434 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: sprmsched02.exe.img
[490/565] p:435 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spscheduler01.exe.img
[491/565] p:436 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsem01.exe.img
[492/565] p:437 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsem02.exe.img
[493/565] p:438 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsem03.exe.img
[494/565] p:439 f:39 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsem_err01.exe.img
Result: failed Time: 0:00:03.727987 spsem_err01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsem_err01/spsem_err01.exe.img
] DHCP client bound to address 10.10.5.121 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 49211 (c03b hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49147 Bytes = 48 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP SEMAPHORE ERROR 01
] *** BEGIN OF TEST SP SEMAPHORE ERROR 01 ***
] TA1 - rtems_semaphore_create - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_release - RTEMS_UNSATISFIED
] TA1 - rtems_semaphore_delete - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - RTEMS_INVALID_NAME
] TA1 - rtems_semaphore_create - RTEMS_INVALID_ADDRESS
] TA1 - rtems_semaphore_create - 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - 2 - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - 3 - RTEMS_TOO_MANY
] TA1 - rtems_semaphore_create - FIFO and inherit - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - FIFO and ceiling - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - ceiling and inherit - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - RTEMS_INVALID_NUMBER
] TA1 - rtems_semaphore_create - RTEMS_MP_NOT_CONFIGURED
] TA1 - rtems_semaphore_delete - RTEMS_INVALID_ID
] TA1 - rtems_semaphore_delete - local RTEMS_INVALID_ID
] TA1 - rtems_semaphore_ident - global RTEMS_INVALID_NAME
] TA1 - rtems_semaphore_ident - local RTEMS_INVALID_NAME
] TA1 - rtems_semaphore_release - RTEMS_INVALID_ID
] TA1 - rtems_semaphore_flush -
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[495/565] p:439 f:40 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsem_err02.exe.img
Result: failed Time: 0:00:04.098566 spsem_err02.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsem_err02/spsem_err02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.6 MiB/s
] done
] Bytes transferred = 49063 (bfa7 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48999 Bytes = 47.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP SEMAPHORE ERROR 02
] *** BEGIN OF TEST SP SEMAPHORE ERROR 02 ***
] TA1 - rtems_task_create - TA2 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_start - start TA2 - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - 1 - RTEMS_SUCCESSFUL
] TA2 - rtems_semaphore_obtain - sem 1 - RTEMS_WAIT FOREVER
] TA1 - rtems_semaphore_create - 2 - RTEMS_SUCCESSFUL
]
] rtems_semaphore_obtain waiting to be deleted FAILED -- expected (RTEMS_OBJECT_WAS_DELETED) got (RTEMS_SUCCESSFUL)
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[496/565] p:439 f:41 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsignal_err01.exe.img
Result: failed Time: 0:00:03.603694 spsignal_err01.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsignal_err01/spsignal_err01.exe.img
] DHCP client bound to address 10.10.5.121 (269 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.2 MiB/s
] done
] Bytes transferred = 48068 (bbc4 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48004 Bytes = 46.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP SIGNAL ERROR 01
] *** BEGIN OF TEST SP SIGNAL ERROR 01 ***
] TA1 - rtems_signal_send - RTEMS_INVALID_ID
] TA1 - rtems_signal_send - RTEMS_INVALID_NUMBER
] TA1 - rtems_signal_send
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[497/565] p:439 f:42 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsimplesched01.exe.img
[498/565] p:440 f:42 u:4 e:0 I:0 B:3 t:5 i:3 | arm/xilinx_zynq_zedboard: spsimplesched02.exe.img
Result: timeout Time: 0:02:06.533473 spsimplesched02.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (266 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsimplesched02/spsimplesched02.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.3 MiB/s
] done
] Bytes transferred = 48045 (bbad hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47981 Bytes = 46.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPSIMPLESCHED 2
] *** BEGIN OF TEST SPSIMPLESCHED 2 ***
] INIT - Create priority ceiling semaphore
] INIT - Obtain priority ceiling semaphore - priority increases
] INIT - Obtain priority ceiling semaphore - priority decreases
] INIT - create task 1
] *** TIMEOUT TIMEOUT
[499/565] p:440 f:42 u:4 e:0 I:0 B:3 t:6 i:3 | arm/xilinx_zynq_zedboard: spsimplesched03.exe.img
[500/565] p:441 f:42 u:4 e:0 I:0 B:3 t:6 i:3 | arm/xilinx_zynq_zedboard: spsize.exe.img
[501/565] p:442 f:42 u:4 e:0 I:0 B:3 t:6 i:3 | arm/xilinx_zynq_zedboard: spstdthreads01.exe.img
[502/565] p:443 f:42 u:4 e:0 I:0 B:3 t:6 i:3 | arm/xilinx_zynq_zedboard: spstkalloc.exe.img
[503/565] p:444 f:42 u:4 e:0 I:0 B:3 t:6 i:3 | arm/xilinx_zynq_zedboard: spstkalloc02.exe.img
[504/565] p:445 f:42 u:4 e:0 I:0 B:3 t:6 i:3 | arm/xilinx_zynq_zedboard: spsysinit01.exe.img
Result: invalid Time: 0:00:07.297234 spsysinit01.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01/spsysinit01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *###
] 3.8 MiB/s
] done
] Bytes transferred = 43528 (aa08 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 43464 Bytes = 42.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
=> test end: None
] 4¡*‚8 €”˜&f$1*¥ù*** END OF TEST SPSYSINIT 1 ***
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[505/565] p:445 f:42 u:4 e:0 I:0 B:3 t:6 i:4 | arm/xilinx_zynq_zedboard: spsyslock01.exe.img
[506/565] p:446 f:42 u:4 e:0 I:0 B:3 t:6 i:4 | arm/xilinx_zynq_zedboard: sptask_err01.exe.img
Result: timeout Time: 0:02:06.205455 sptask_err01.exe.img
] . done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptask_err01/sptask_err01.exe.img
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 7.6 MiB/s
] done
] Bytes transferred = 47944 (bb48 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47880 Bytes = 46.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP TASK ERROR 01
] *** BEGIN OF TEST SP TASK ERROR 01 ***
] TA1 - rtems_task_create - TA2 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_start - start TA2 - RTEMS_SUCCESSFUL
] TA1 - rtems_task_wake_after - yield processor - RTEMS_SUCCESSFUL
] *** TIMEOUT TIMEOUT
[507/565] p:446 f:42 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: sptask_err02.exe.img
Result: failed Time: 0:00:17.208503 sptask_err02.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptask_err02/sptask_err02.exe.img
] DHCP client bound to address 10.10.5.202 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 6.8 MiB/s
] done
] Bytes transferred = 49759 (c25f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49695 Bytes = 48.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP TASK ERROR 02
] *** BEGIN OF TEST SP TASK ERROR 02 ***
] TA1 - rtems_task_wake_when - RTEMS_INVALID_ADDRESS
] TA1 - rtems_task_wake_when - RTEMS_NOT_DEFINED
] TA1 - rtems_clock_set - 08:30:45 02/05/1988 - RTEMS_SUCCESSFUL
] TA1 - rtems_task_wake_when - TICKINVALID - sleep about 3 seconds
] TA1 - rtems_task_wake_when - RTEMS_INVALID_ADDRESS
] TA1 - rtems_task_wake_when - TICKINVALID - woke up RTEMS_SUCCESSFUL
] TA1 - rtems_task_wake_when - 08:30:48 02/05/1961 - RTEMS_INVALID_CLOCK
] TA1 - rtems_task_wake_when - 25:30:48 02/05/1988 - RTEMS_INVALID_CLOCK
] TA1 - current time - 08:30:51 02/05/1988
] TA1 - rtems_task_wake_when - 08:30:51 01/05/1988
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[508/565] p:446 f:43 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: sptask_err03.exe.img
Result: failed Time: 0:00:04.096792 sptask_err03.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptask_err03/sptask_err03.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.6 MiB/s
] done
] Bytes transferred = 48886 (bef6 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48822 Bytes = 47.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SP TASK ERROR 03
] *** BEGIN OF TEST SP TASK ERROR 03 ***
] TA1 - rtems_task_create - RTEMS_INVALID_NAME
] TA1 - rtems_task_create - RTEMS_INVALID_ADDRESS
] TA1 - rtems_task_create - stack size - RTEMS_UNSATISFIED -- SKIPPED
] TA1 - rtems_task_create - TA2 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_suspend - suspend TA2 - RTEMS_SUCCESSFUL
] TA1 - rtems_task_suspend - suspend TA2 - RTEMS_ALREADY_SUSPENDED
] TA1 - rtems_task_resume - TA2 resumed - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - TA3 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 5 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 6 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 7 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 8 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 9 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 10 created - RTEMS_SUCCESSFUL
] TA1 - rtems_task_create - 11 - RTEMS_TOO_MANY
] TA1 - rtems_task_create - R
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[509/565] p:446 f:44 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: sptask_err04.exe.img
[510/565] p:447 f:44 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: sptasknopreempt01.exe.img
[511/565] p:448 f:44 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: spthreadlife01.exe.img
[512/565] p:449 f:44 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: spthreadq01.exe.img
Result: failed Time: 0:00:03.611693 spthreadq01.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spthreadq01/spthreadq01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 48856 (bed8 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48792 Bytes = 47.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPTHREADQ 1
] *** BEGIN OF TEST SPTHREADQ 1 ***
] Init - ÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[513/565] p:449 f:45 u:4 e:0 I:0 B:3 t:7 i:4 | arm/xilinx_zynq_zedboard: sptimecounter01.exe.img
Result: invalid Time: 0:00:07.124776 sptimecounter01.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01/sptimecounter01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 3.1 MiB/s
] done
] Bytes transferred = 22838 (5936 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 22774 Bytes = 22.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4¡*‚8 €”˜(¢ðPA@ *¥A©”˜(¢ðPA@ *¥¡¨¨ø
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.202 (269 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[514/565] p:449 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptimecounter02.exe.img
[515/565] p:450 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptimecounter03.exe.img
[516/565] p:451 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptimer_err01.exe.img
[517/565] p:452 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptimer_err02.exe.img
[518/565] p:453 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptimerserver01.exe.img
[519/565] p:454 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptimespec01.exe.img
[520/565] p:455 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptls01.exe.img
[521/565] p:456 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptls02.exe.img
[522/565] p:457 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: sptls03.exe.img
[523/565] p:458 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: spwatchdog.exe.img
[524/565] p:459 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: spwkspace.exe.img
[525/565] p:460 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: tm01.exe.img
[526/565] p:461 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: tm02.exe.img
[527/565] p:462 f:45 u:4 e:0 I:0 B:3 t:7 i:5 | arm/xilinx_zynq_zedboard: tm03.exe.img
Result: invalid Time: 0:00:07.214887 tm03.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm03/tm03.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 47034 (b7ba hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46970 Bytes = 45.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** Bÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[528/565] p:462 f:45 u:4 e:0 I:0 B:3 t:7 i:6 | arm/xilinx_zynq_zedboard: tm04.exe.img
Result: invalid Time: 0:00:07.171044 tm04.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm04/tm04.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (258 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.7 MiB/s
] done
] Bytes transferred = 49518 (c16e hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49454 Bytes = 48.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[529/565] p:462 f:45 u:4 e:0 I:0 B:3 t:7 i:7 | arm/xilinx_zynq_zedboard: tm05.exe.img
Result: invalid Time: 0:00:07.822033 tm05.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm05/tm05.exe.img
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 46779 (b6bb hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46715 Bytes = 45.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** BEGIN OFÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[530/565] p:462 f:45 u:4 e:0 I:0 B:3 t:7 i:8 | arm/xilinx_zynq_zedboard: tm06.exe.img
[531/565] p:463 f:45 u:4 e:0 I:0 B:3 t:7 i:8 | arm/xilinx_zynq_zedboard: tm07.exe.img
Result: invalid Time: 0:00:06.638799 tm07.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm07/tm07.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.2 MiB/s
] done
] Bytes transferred = 46897 (b731 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46833 Bytes = 45.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** BEÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[532/565] p:463 f:45 u:4 e:0 I:0 B:3 t:7 i:9 | arm/xilinx_zynq_zedboard: tm08.exe.img
[533/565] p:464 f:45 u:4 e:0 I:0 B:3 t:7 i:9 | arm/xilinx_zynq_zedboard: tm09.exe.img
[534/565] p:465 f:45 u:4 e:0 I:0 B:3 t:7 i:9 | arm/xilinx_zynq_zedboard: tm10.exe.img
[535/565] p:466 f:45 u:4 e:0 I:0 B:3 t:7 i:9 | arm/xilinx_zynq_zedboard: tm11.exe.img
Result: invalid Time: 0:00:08.314294 tm11.exe.img
] ..... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm11/tm11.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47927 (bb37 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47863 Bytes = 46.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** Bÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[536/565] p:466 f:45 u:4 e:0 I:0 B:3 t:7 i:10 | arm/xilinx_zynq_zedboard: tm12.exe.img
Result: invalid Time: 0:00:07.709705 tm12.exe.img
] ..... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm12/tm12.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 47946 (bb4a hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47882 Bytes = 46.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** B
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[537/565] p:466 f:45 u:4 e:0 I:0 B:3 t:7 i:11 | arm/xilinx_zynq_zedboard: tm13.exe.img
Result: invalid Time: 0:00:07.265622 tm13.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm13/tm13.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3 MiB/s
] done
] Bytes transferred = 47929 (bb39 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47865 Bytes = 46.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** Bÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[538/565] p:466 f:45 u:4 e:0 I:0 B:3 t:7 i:12 | arm/xilinx_zynq_zedboard: tm14.exe.img
Result: invalid Time: 0:00:06.710118 tm14.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (264 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm14/tm14.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47944 (bb48 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47880 Bytes = 46.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** Bÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[539/565] p:466 f:45 u:4 e:0 I:0 B:3 t:7 i:13 | arm/xilinx_zynq_zedboard: tm15.exe.img
Result: failed Time: 0:00:04.589998 tm15.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm15/tm15.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 47190 (b856 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47126 Bytes = 46 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: TIME TEST 15
] *** BEGIN OF TEST TIME TEST 15 ***
] rtems_event_receive: obtain current events - 0
] rtems_event_receive: not available caller blocks - 0
] rtems_event_receive: not available NO_WAIT - 0
] rtems_event_s
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[540/565] p:466 f:46 u:4 e:0 I:0 B:3 t:7 i:13 | arm/xilinx_zynq_zedboard: tm16.exe.img
Result: invalid Time: 0:00:07.236360 tm16.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (273 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm16/tm16.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.1 MiB/s
] done
] Bytes transferred = 46874 (b71a hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46810 Bytes = 45.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** Bÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (256 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[541/565] p:466 f:46 u:4 e:0 I:0 B:3 t:7 i:14 | arm/xilinx_zynq_zedboard: tm17.exe.img
Result: invalid Time: 0:00:07.168123 tm17.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (266 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm17/tm17.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 46868 (b714 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46804 Bytes = 45.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[542/565] p:466 f:46 u:4 e:0 I:0 B:3 t:7 i:15 | arm/xilinx_zynq_zedboard: tm18.exe.img
[543/565] p:467 f:46 u:4 e:0 I:0 B:3 t:7 i:15 | arm/xilinx_zynq_zedboard: tm19.exe.img
Result: failed Time: 0:00:04.176447 tm19.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm19/tm19.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.3 MiB/s
] done
] Bytes transferred = 47940 (bb44 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47876 Bytes = 46.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: TIME TEST 19
] *** BEGIN OF TEST TIME TEST 19 ***
] rtems_signal_catch: only case - 0
] rtems_signal_send: returns to caller - 0
] rtems_signal_send: signal to self - 0ÿ
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[544/565] p:467 f:47 u:4 e:0 I:0 B:3 t:7 i:15 | arm/xilinx_zynq_zedboard: tm20.exe.img
Result: timeout Time: 0:02:06.542894 tm20.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (270 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm20/tm20.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 50054 (c386 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49990 Bytes = 48.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: TIME TEST 20
] *** BEGIN OF TEST TIME TEST 20 ***
] rtems_partition_create: only case - 0
] rtems_region_get_segment: not available caller blocks - 0
] rtems_region_create: only case - 0
] rtems_region_return_segment: task readied returns to caller - 0
] rtems_partition_get_buffer: available - 0
] rtems_partition_get_buffer: not available - 0
] rtems_partition_return_buffer: only case - 0
] rtems_partition_delete: only case - 0
] rtems_region_get_segment: available - 0
] rtems_region_get_segment: not available NO_WAIT - 0
] rtems_region_return_segment: no waiting tasks - 0
] *** TIMEOUT TIMEOUT
[545/565] p:467 f:47 u:4 e:0 I:0 B:3 t:8 i:15 | arm/xilinx_zynq_zedboard: tm21.exe.img
[546/565] p:468 f:47 u:4 e:0 I:0 B:3 t:8 i:15 | arm/xilinx_zynq_zedboard: tm22.exe.img
Result: invalid Time: 0:00:06.727114 tm22.exe.img
] .. done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm22/tm22.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 48151 (bc17 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48087 Bytes = 47 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
] ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[547/565] p:468 f:47 u:4 e:0 I:0 B:3 t:8 i:16 | arm/xilinx_zynq_zedboard: tm23.exe.img
Result: invalid Time: 0:00:07.215742 tm23.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm23/tm23.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (259 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.2 MiB/s
] done
] Bytes transferred = 49757 (c25d hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 49693 Bytes = 48.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] **ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[548/565] p:468 f:47 u:4 e:0 I:0 B:3 t:8 i:17 | arm/xilinx_zynq_zedboard: tm24.exe.img
Result: invalid Time: 0:00:07.239831 tm24.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm24/tm24.exe.img
] DHCP client bound to address 10.10.5.121 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 8.9 MiB/s
] done
] Bytes transferred = 46911 (b73f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46847 Bytes = 45.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] ***ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete..... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (259 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[549/565] p:468 f:47 u:4 e:0 I:0 B:3 t:8 i:18 | arm/xilinx_zynq_zedboard: tm25.exe.img
[550/565] p:469 f:47 u:4 e:0 I:0 B:3 t:8 i:18 | arm/xilinx_zynq_zedboard: tm26.exe.img
Result: invalid Time: 0:00:06.731284 tm26.exe.img
] ... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm26/tm26.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 6.6 MiB/s
] done
] Bytes transferred = 48411 (bd1b hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48347 Bytes = 47.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] **
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[551/565] p:469 f:47 u:4 e:0 I:0 B:3 t:8 i:19 | arm/xilinx_zynq_zedboard: tm27.exe.img
Result: failed Time: 0:00:04.611548 tm27.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm27/tm27.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (264 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 5 MiB/s
] done
] Bytes transferred = 47375 (b90f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47311 Bytes = 46.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: TIME TEST 27
] *** BEGIN OF TEST TIME TEST 27 ***
] rtems interrupt: entry overhead returns to interrupted task - 0
] rtems interrupt: entry overhead returns to preempting task - 0
] rtems interrupt: exit overhead returns to interrupted task - 0
] r
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[552/565] p:469 f:48 u:4 e:0 I:0 B:3 t:8 i:19 | arm/xilinx_zynq_zedboard: tm28.exe.img
[553/565] p:470 f:48 u:4 e:0 I:0 B:3 t:8 i:19 | arm/xilinx_zynq_zedboard: tm29.exe.img
[554/565] p:471 f:48 u:4 e:0 I:0 B:3 t:8 i:19 | arm/xilinx_zynq_zedboard: tm30.exe.img
[555/565] p:472 f:48 u:4 e:0 I:0 B:3 t:8 i:19 | arm/xilinx_zynq_zedboard: tm31.exe.img
[556/565] p:473 f:48 u:4 e:0 I:0 B:3 t:8 i:19 | arm/xilinx_zynq_zedboard: tm32.exe.img
Result: invalid Time: 0:00:07.227861 tm32.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm32/tm32.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 47033 (b7b9 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46969 Bytes = 45.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[557/565] p:473 f:48 u:4 e:0 I:0 B:3 t:8 i:20 | arm/xilinx_zynq_zedboard: tm33.exe.img
[558/565] p:474 f:48 u:4 e:0 I:0 B:3 t:8 i:20 | arm/xilinx_zynq_zedboard: tm34.exe.img
Result: invalid Time: 0:00:07.255646 tm34.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm34/tm34.exe.img
] DHCP client bound to address 10.10.5.121 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 47028 (b7b4 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46964 Bytes = 45.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** Bÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[559/565] p:474 f:48 u:4 e:0 I:0 B:3 t:8 i:21 | arm/xilinx_zynq_zedboard: tm35.exe.img
[560/565] p:475 f:48 u:4 e:0 I:0 B:3 t:8 i:21 | arm/xilinx_zynq_zedboard: tm36.exe.img
Result: invalid Time: 0:00:07.119478 tm36.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/tmtests/tm36/tm36.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.7 MiB/s
] done
] Bytes transferred = 47035 (b7bb hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46971 Bytes = 45.9 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
] *** ÿ
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (260 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[561/565] p:475 f:48 u:4 e:0 I:0 B:3 t:8 i:22 | arm/xilinx_zynq_zedboard: tmck.exe.img
[562/565] p:476 f:48 u:4 e:0 I:0 B:3 t:8 i:22 | arm/xilinx_zynq_zedboard: tmcontext01.exe.img
[563/565] p:477 f:48 u:4 e:0 I:0 B:3 t:8 i:22 | arm/xilinx_zynq_zedboard: tmfine01.exe.img
[564/565] p:478 f:48 u:4 e:0 I:0 B:3 t:8 i:22 | arm/xilinx_zynq_zedboard: tmoverhd.exe.img
[565/565] p:479 f:48 u:4 e:0 I:0 B:3 t:8 i:22 | arm/xilinx_zynq_zedboard: tmtimer01.exe.img
Passed: 480
Failed: 48
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 8
Invalid: 22
------------------
Total: 565
Failures:
sperror03.exe.img
psxsignal04.exe.img
psxtmcond06.exe.img
sp76.exe.img
sperror01.exe.img
psx05.exe.img
spratemon_err01.exe.img
spintr_err01.exe.img
sptask_err03.exe.img
tm15.exe.img
sp06.exe.img
tm19.exe.img
psxaio02.exe.img
debugger01.exe.img
sp02.exe.img
sp51.exe.img
sptask_err02.exe.img
spclock_err02.exe.img
spsem_err02.exe.img
psxtmbarrier03.exe.img
psxtmcond03.exe.img
sp16.exe.img
spsignal_err01.exe.img
psxtmrwlock06.exe.img
psxtmsem05.exe.img
sp62.exe.img
psxsignal03.exe.img
sp37.exe.img
psxtmcond07.exe.img
sp74.exe.img
psxconfig01.exe.img
sp13.exe.img
psxtmrwlock07.exe.img
psxtmsem04.exe.img
spmsgq_err01.exe.img
spclock_err01.exe.img
psxgetattrnp01.exe.img
rhdeadlockbrk.exe.img
spthreadq01.exe.img
fsjffs2gc01.exe.img
spport_err01.exe.img
sp66.exe.img
sperror02.exe.img
spsem_err01.exe.img
psxtmmutex05.exe.img
spmsgq_err02.exe.img
tm27.exe.img
spevent_err03.exe.img
User Input:
fileio.exe.img
top.exe.img
monitor.exe.img
termios.exe.img
Benchmark:
linpack.exe.img
dhrystone.exe.img
whetstone.exe.img
Timeouts:
psxclassic01.exe.img
sptask_err01.exe.img
dl02.exe.img
sp59.exe.img
sp65.exe.img
tm20.exe.img
spsimplesched02.exe.img
sp07.exe.img
Invalid:
tm34.exe.img
spinternalerror01.exe.img
tm17.exe.img
sptimecounter01.exe.img
tm23.exe.img
tm03.exe.img
tm36.exe.img
tm26.exe.img
tm14.exe.img
tm24.exe.img
dumpbuf01.exe.img
tm13.exe.img
tm32.exe.img
tm11.exe.img
tm16.exe.img
tm07.exe.img
tm22.exe.img
tm05.exe.img
spsysinit01.exe.img
tm04.exe.img
tm12.exe.img
sp54.exe.img
Average test time: 0:00:12.183399
Testing time : 1:54:43.620899
More information about the build
mailing list