[rtems-test] 2017-10-23 10:22:04: xilinx_zynq_zedboard

[Chris Johns]

Testing time     : 0:00:26.143082
Average test time: 0:00:26.143082

Summary
=======

Passed:        0
Failed:        0
User Input:    0
Expected Fail: 0
Indeterminate: 0
Benchmark:     0
Timeout:       0
Invalid:       1
----------------
Total:         1

Invalid:
 hello.exe

Log
===

RTEMS Testing - Tester, 4.12 (7051ba5b1958 modified)
 Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=xilinx_zynq_zedboard --timeout=60 --log=t.txt --mail --filter=hello.exe .
 Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
[1/1] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | arm/xilinx_zynq_zedboard: hello.exe
Result: invalid    Time: 0:00:25.816289 hello.exe
=> target on: wemo-reset CSEng1 0 && sleep 4 && wemo-reset CSEng1 -1: 
=> target pretest: rtems-zynq-mkimg ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/hello/hello.exe: Image: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/hello/hello.exe
=> Image Name:   RTEMS
=> Created:      Mon Oct 23 10:22:14 2017
=> Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=> Data Size:    55775 Bytes = 54.47 kB = 0.05 MB
=> Load Address: 00104000
=> Entry Point:  00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] BOOTP broadcast 4
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/samples/hello/hello.exe
] DHCP client bound to address 10.10.5.202 (2881 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#################################################################
] 	 #################################################################
] 	 #################################################################
] 	 #################################################################
] 	 ##########
] 	 7.4 MiB/s
] done
] Bytes transferred = 3952420 (3c4f24 hex)
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] BOOTP broadcast 4
] DHCP client bound to address 10.10.5.121 (3180 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
=> target off: wemo-reset CSEng1 0: 

Passed:        0
Failed:        0
User Input:    0
Expected Fail: 0
Indeterminate: 0
Benchmark:     0
Timeout:       0
Invalid:       1
----------------
Total:         1

Invalid:
 hello.exe
Average test time: 0:00:26.143082
Testing time     : 0:00:26.143082