[rtems-test] powerpc/qoriq_e6500_64: RTEMS_POSIX_API, RTEMS_SMP: Passed:655 Failed:6 Timeout:0 Invalid:1 Wrong:0
sebastian.huber at embedded-brains.de
sebastian.huber at embedded-brains.de
Fri Feb 2 09:51:02 UTC 2018
Testing time : 2:05:32.603625
Average test time: 0:00:11.242691
Host
====
Linux-4.4.104-18.44-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.104-18.44-default #1 SMP Thu Jan 4 08:07:55 UTC 2018 (05a9de6) x86_64 x86_64)
Configuration
=============
Version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
Build : RTEMS_POSIX_API,RTEMS_SMP
Tools : 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
Summary
=======
Passed: 655
Failed: 6
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 670
Failures:
spintrcritical10.exe
ada_sp20.exe
ada_sp15.exe
ada_tm20.exe
ada_sp01.exe
ada_sp04.exe
User Input:
termios.exe
capture.exe
monitor.exe
fileio.exe
top.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Invalid:
sp20.exe
Log
===
RTEMS Testing - Tester, 5.not_released
Command Line: /build/rtems/5/bin/rtems-test --rtems-bsp=qoriq_e6500_64 --rtems-tools=/build/rtems/5 --user-config=/home/EB/sebastian_h/.rtemstesterrc --debug-trace=output --log=l.txt --mail .
Python: 2.7.13 (default, Mar 22 2017, 12:31:17) [GCC]
Host: Linux-4.4.104-18.44-default-x86_64-with-SuSE-42.2-x86_64 (Linux huber-nb-linux 4.4.104-18.44-default #1 SMP Thu Jan 4 08:07:55 UTC 2018 (05a9de6) x86_64 x86_64)
[ 1/670] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_base_sp.exe
<<skipping passes>>
[ 5/670] p:4 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp01.exe
Result: failed Time: 0:00:06.026991 ada_sp01.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp01/ada_sp01.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp01/ada_sp01.exe.img
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#####################
] 1.4 MiB/s
] done
] Bytes transferred = 212921 (33fb9 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 212857 Bytes = 207.9 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
]
]
=> test start: ADA SP 1
] *** BEGIN OF TEST ADA SP 1 ***
] *** TEST VERSION: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
] clockid_t: size 64 == 32, alignment 8 == 4
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[ 6/670] p:4 f:1 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp02.exe
<<skipping passes>>
[ 8/670] p:6 f:1 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp04.exe
Result: failed Time: 0:00:23.094268 ada_sp04.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp04/ada_sp04.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp04/ada_sp04.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#####################
] 1.9 MiB/s
] done
] Bytes transferred = 214536 (34608 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 214472 Bytes = 209.4 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
]
]
=> test start: ADA SP 4
] *** BEGIN OF TEST ADA SP 4 ***
] *** TEST VERSION: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
] TA1 - task_suspend - on Task 2
] TA1 - task_suspend - on Task 3
] TA1 - killing time
] TA1 - task_resume - on Task 2
] TA1 - task_resume - on Task 3
]
] *** FATAL ***
] fatal source: 1 (INTERNAL_ERROR_RTEMS_API)
] fatal code: 1 (0x00000001)
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[ 9/670] p:6 f:2 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp05.exe
<<skipping passes>>
[ 18/670] p:15 f:2 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp15.exe
Result: failed Time: 0:00:06.113801 ada_sp15.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp15/ada_sp15.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp15/ada_sp15.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#####################
] 1.1 MiB/s
] done
] Bytes transferred = 211747 (33b23 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 211683 Bytes = 206.7 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
]
]
=> test start: ADA SP 15
] *** BEGIN OF TEST ADA SP 15 ***
] *** TEST VERSION: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
] INIT - partition_create - partition 1
] PARTITION_CREATE OF PT1 FAILED -- expected SUCCESSFUL got INVALID_ADDRESS
]
] *** FATAL ***
] fatal source: 1 (INTERNAL_ERROR_RTEMS_API)
] fatal code: 9 (0x00000009)
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[ 19/670] p:15 f:3 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp16.exe
<<skipping passes>>
[ 22/670] p:18 f:3 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp20.exe
Result: failed Time: 0:00:11.550135 ada_sp20.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp20/ada_sp20.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/sptests/sp20/ada_sp20.exe.img
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#####################
] 1.1 MiB/s
] done
] Bytes transferred = 214549 (34615 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 214485 Bytes = 209.5 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
]
]
=> test start: ADA SP 20
] *** BEGIN OF TEST ADA SP 20 ***
] *** TEST VERSION: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
] TA1 - rate_monotonic_create id = 16#42010001#
] TA1 - rate_monotonic_ident id = 16#42010001#
] TA1 - (16#42010001#) period 2
] TA2 - rate_monotonic_create id = 16#42010002#
] TA2 - rate_monotonic_ident id = 16#42010002#
] TA2 - (16#42010002#) period 2
] TA3 - rate_monotonic_create id = 16#42010003#
] TA3 - rate_monotonic_ident id = 16#42010003#
] TA3 - (16#42010003#) period 2
] TA4 - rate_monotonic_create id = 16#42010004#
] TA4 - rate_monotonic_ident id = 16#42010004#
] TA4 - (16#42010004#) period 2
] TA5 - rate_monotonic_create id = 16#42010005#
] TA5 - rate_monotonic_ident id = 16#42010005#
] TA5 - (16#42010005#) period 100
] TA6 - rate_monotonic_create id = 16#42010006#
] TA6 - rate_monotonic_ident id = 16#42010006#
] TA6 - (16#42010006#) period 0
] TA5 - PERIODS CHECK OK (1)
] TA5 - PERIODS CHECK OK (2)
] TA5 - PERIODS CHECK OK (3)
] TA5 - PERIODS CHECK OK (4)
] TA5 - PERIODS CHECK OK (5)
] TA6 - Actual: 10 Expected: 10 - OK
] TA6 - Actual: 20 Expected: 20 - OK
] TA6 - Actual: 30 Expected: 30 - OK
] TA6 - Actual: 40 Expected: 40 - OK
] TA6 - Actual: 50 Expected: 50 - OK
] TA6 - Actual: 60 Expected: 60 - OK
] TA6 - Actual: 70 Expected: 70 - OK
] TA6 - Actual: 80 Expected: 80 - OK
] TA6 - Actual: 90 Expected: 90 - OK
] TA6 - Actual: 100 Expected: 100 - OK
] RATE_MONOTONIC_PERIOD FAILED -- expected SUCCESSFUL got TIMEOUT
]
] *** FATAL ***
] fatal source: 1 (INTERNAL_ERROR_RTEMS_API)
] fatal code: 6 (0x00000006)
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
[ 23/670] p:18 f:4 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_sp22.exe
<<skipping passes>>
[ 48/670] p:43 f:4 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_tm20.exe
Result: failed Time: 0:00:06.545654 ada_tm20.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/tmtests/tm20/ada_tm20.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/ada/tmtests/tm20/ada_tm20.exe.img
] 34298 bytes read in 17 ms (1.9 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *#####################
] 1.4 MiB/s
] done
] Bytes transferred = 212933 (33fc5 hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 212869 Bytes = 207.9 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
]
]
=> test start: ADA TM 20
] *** BEGIN OF TEST ADA TM 20 ***
] *** TEST VERSION: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
] PARTITION_CREATE 1033
] REGION_CREATE 1622
] PARTITION_GET_BUFFER (available) 446
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
] exception vector 13 (0xd)
] next PC or address of fault = 0x0002db08
] saved MSR = 0x8200a200
] context = task, ISR nest level = 0
] thread dispatch disable level = 0
] R0 = 0x0000c684 R1 = 0x05032760 R2 = 0x04051b00 R3 = 0x00000000
] R4 = 0x00000001 R5 = 0x00000021 R6 = 0x00000000 R7 = 0x00000000
] R8 = 0x00000108 R9 = 0x05001b00 R10 = 0x00000021 R11 = 0x05033340
] R12 = 0x0002dd40 R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000
] R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
] R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x04000730
] R24 = 0x04000748 R25 = 0x00000000 R26 = 0x04001338 R27 = 0x00000000
] R28 = 0x000000a9 R29 = 0x04000778 R30 = 0x050078f0 R31 = 0x050078f0
] CR = 0x20000004
] CTR = 0x0002dd40
] XER = 0x20000000
] LR = 0x0002dafc
] DEAR = 0x00000000
] ESR = 0x00000000
] MCSR = 0x00000000
] VSCR = 0x00000000
] VRSAVE = 0x00000000
] V00 = 0x00000000000000000000000000000000
] V01 = 0x00820200010100200000000000000000
] V02 = 0x00008020000000000000000000000000
] V03 = 0x00220000080000000000000000100000
] V04 = 0x00000000000000000000000000000000
] V05 = 0x00000000000000000000000000000800
] V06 = 0x00000000000000010000000000080000
] V07 = 0x00000000000000004000000010004000
] V08 = 0x00000000000000000400000008000000
] V09 = 0x00400000000000000000000000000000
] V10 = 0x00000000000000000000000000000000
] V11 = 0x00004000000000020000012000000020
] V12 = 0x00000400000000000000010000000000
] V13 = 0x00200000000000000008000000000000
] V14 = 0x00000000000000000001000800000000
] V15 = 0x00040000000000000000000000001020
] V16 = 0x00000004000200000000000000000000
] V17 = 0x00001000010000100400000000000000
] V18 = 0x20000000000000000000001000000000
] V19 = 0x00000000000000000000001000000000
] V20 = 0x00000000000000000000000000000000
] V21 = 0x00000000000000000000000000000000
] V22 = 0x00000000000000000000000000000000
] V23 = 0x00000000000000000000000000000000
] V24 = 0x00000000000000000000000000000000
] V25 = 0x00000000000000000000000000000000
] V26 = 0x00000000000000000000000000000000
] V27 = 0x00000000000000000000000000000000
] V28 = 0x00000000000000000000000000000000
] V29 = 0x00000000000000000000000000000000
] V30 = 0x00000000000000000000000000000000
] V31 = 0x00000000000000000000000000000000
] FPSCR = 0x18444492273895866368
] F00 = 0x0000000000000000
] F01 = 0x0000000000000000
] F02 = 0x0000000000000000
] F03 = 0x0000000000000000
] F04 = 0x0000000000000000
] F05 = 0x0000000000000000
] F06 = 0x0000000000000000
] F07 = 0x0000000000000000
] F08 = 0x0000000000000000
] F09 = 0x0000000000000000
] F10 = 0x0000000000000000
] F11 = 0x0000000000000000
] F12 = 0x0000000000000000
] F13 = 0x0000000000000000
] F14 = 0x0000000000000000
] F15 = 0x0000000000000000
] F16 = 0x0000000000000000
] F17 = 0x0000000000000000
] F18 = 0x0000000000000000
] F19 = 0x0000000000000000
] F20 = 0x0000000000000000
] F21 = 0x0000000000000000
] F22 = 0x0000000000000000
] F23 = 0x0000000000000000
] F24 = 0x0000000000000000
] F25 = 0x0000000000000000
] F26 = 0x0000000000000000
] F27 = 0x0000000000000000
] F28 = 0x0000000000000000
] F29 = 0x0000000000000000
] F30 = 0x0000000000000000
] F31 = 0x0000000000000000
] executing thread ID = 0x0a010002, name = TIM1
] Stack Trace:
] IP: 0x0002db08, LR: 0x0002dafc
] --^ 0xdeadbeefdeadbeef--^ 0x2000000405007904--^ 0x000001be--^ 0x15245474e--^ 0x000001be
] --^ 0x00000064--^ 0x05001b00--^ 0xdeadbeefdeadbeef--^ 0x00000000--^ 0xdeadbeef
] --^ 0x00000000
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[ 49/670] p:43 f:5 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: ada_tm21.exe
<<skipping passes>>
[434/670] p:420 f:5 u:5 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/qoriq_e6500_64: sp20.exe
Result: invalid Time: 0:01:51.691904 sp20.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/sptests/sp20/sp20.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/sptests/sp20/sp20.exe.img
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *########
] 5.5 MiB/s
] done
] Bytes transferred = 80668 (13b1c hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 80604 Bytes = 78.7 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
] TA1 - rtems_rate_monotonic_create id = 0x42010001
] TA1 - rtems_rate_monotonic_ident id = 0x42010001
] TA1 - (0x42010001) period 2
] TA2 - rtems_rate_monotonic_create id = 0x42010002
] TA2 - rtems_rate_monotonic_ident id = 0x42010002
] TA2 - (0x42010002) period 2
] TA3 - rtems_rate_monotonic_create id = 0x42010003
] TA3 - rtems_rate_monotonic_ident id = 0x42010003
] TA3 - (0x42010003) period 2
] TA4 - rtems_rate_monotonic_create id = 0x42010004
] TA4 - rtems_rate_monotonic_ident id = 0x42010004
] TA4 - (0x42010004) period 2
] TA5 - rtems_rate_monotonic_create id = 0x42010005
] TA5 - rtems_rate_monotonic_ident id = 0x42010005
] TA5 - (0x42010005) period 100
] TA6 - rtems_rate_monotonic_create id = 0x42010006
] TA6 - rtems_rate_monotonic_ident id = 0x42010006
] TA6 - (0x42010006) period 0
] TA5 - PERIODS CHECK OK (1)
] TA5 - PERIODS CHECK OK (2)
] TA5 - PERIODS CHECK OK (3)
] TA5 - PERIODS CHECK OK (4)
] TA5 - PERIODS CHECK OK (5)
] TA6 - Actual: 10 Expected: 10 - OK
] TA6 - Actual: 20 Expected: 20 - OK
] TA6 - Actual: 30 Expected: 30 - OK
] TA6 - Actual: 40 Expected: 40 - OK
] TA6 - Actual: 50 Expected: 50 - OK
] TA6 - Actual: 60 Expected: 60 - OK
] TA6 - Actual: 70 Expected: 70 - OK
] TA6 - Actual: 80 Expected: 80 - OK
] TA6 - Actual: 90 Expected: 90 - OK
] TA6 - Actual: 100 Expected: 100 - OK
] TA5 - PERIODS CHECK OK (6)
] TA5 - PERIODS CHECK OK (7)
] TA5 - PERIODS CHECK OK (8)
] TA5 - PERIODS CHECK OK (9)
] TA5 - PERIODS CHECK OK (10)
]
=> test end: None
] *** END OF TEST SP 20 ***
]
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
=> tftp: re-requesting exe; target must have reset
] reading t2080rdb.dtb
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] WARNING: adjusting available memory to 30000000
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
]
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
[435/670] p:420 f:5 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_64: sp2038.exe
<<skipping passes>>
[558/670] p:543 f:5 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_64: spintrcritical10.exe
Result: failed Time: 0:00:58.571198 spintrcritical10.exe
=> target exe filter: find:\.exe subst:.exe.img -> ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] cs4340_phy_init error.
] PHY reset timed out
] cs4340_phy_init error.
] FM1 at DTSEC3 [PRIME], FM1 at DTSEC4, FM1 at TGEC1, FM1 at TGEC2, FM1 at TGEC3, FM1 at TGEC4
] Hit any key to stop autoboot: 1 0
] reading t2080rdb.dtb
=> tftp: ./powerpc-rtems5/c/qoriq_e6500_64/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] 34298 bytes read in 18 ms (1.8 MiB/s)
] Using FM1 at DTSEC3 device
] TFTP from server 10.27.0.1; our IP address is 10.27.0.2
] Filename 'rtems.img'.
] Load address: 0x1000000
] Loading: *######
] 4.7 MiB/s
] done
] Bytes transferred = 59546 (e89a hex)
] WARNING: adjusting available memory to 30000000
] ## Booting kernel from Legacy Image at 01000000 ...
] Image Name: RTEMS
] Image Type: PowerPC Linux Kernel Image (gzip compressed)
] Data Size: 59482 Bytes = 58.1 KiB
] Load Address: 00004000
] Entry Point: 00004000
] Verifying Checksum ... OK
] ## Flattened Device Tree blob at 03000000
] Booting using the fdt blob at 0x3000000
] Uncompressing Kernel Image ... OK
] Loading Device Tree to 03fe4000, end 03fff5f9 ... OK
]
]
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] *** TEST VERSION: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
] Init - Trying to generate any satisfied before timeout while blocking on event
] /home/EB/sebastian_h/git-rtems/c/src/../../testsuites/sptests/spintrcritical10/init.c: 144 ctx->hit
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.e713e87b85453a9daeef20dfd19ab743e0378f2f
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 6d9c77c77d271d1fc2dfe8493d6713930b52a6dd, Newlib 3.0.0)
]
]
=> target start detected
] U-Boot 2014.01QorIQ-SDK-T2080V1.1-T1040V0.3 (Apr 22 2014 - 10:16:32)
]
] CPU0: T2080E, Version: 1.0, (0x85380010)
] Core: e6500, Version: 2.0, (0x80400020)
] Clock Configuration:
] CPU0:1533.180 MHz, CPU1:1533.180 MHz, CPU2:1533.180 MHz, CPU3:1533.180 MHz,
] CCB:599.940 MHz,
] DDR:799.980 MHz (1599.960 MT/s data rate) (Asynchronous), IFC:149.985 MHz
] FMAN1: 699.930 MHz
] QMAN: 299.970 MHz
] PME: 599.940 MHz
] L1: D-cache 32 KiB enabled
] I-cache 32 KiB enabled
] Reset Configuration Word (RCW):
] 00000000: 120c0017 15000000 00000000 00000000
] 00000010: 66160002 00000000 ec027000 c1000000
] 00000020: 00e00000 00000000 00000000 000307fc
] 00000030: 00000000 00000000 00000000 00000004
] Board: T2080RDB, Board rev: 0x01 CPLD ver: 0x03, boot from NOR vBank0
] SERDES Reference Clocks:
] SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
] SD2_CLK1=100.00MHZ, SD2_CLK2=100.00MHZ
] I2C: ready
] SPI: ready
] DRAM: Initializing....using SPD
] Detected UDIMM 18KSF51272HZ-1G6K2
] 2 GiB left unmapped
] 4 GiB (DDR3, 64-bit, CL=11, ECC on)
] DDR Chip-Select Interleaving Mode: CS0+CS1
] Flash: 128 MiB
] L2: 2 MiB enabled
] Corenet Platform Cache: 512 KiB enabled
] Using SERDES1 Protocol: 102 (0x66)
] Using SERDES2 Protocol: 22 (0x16)
] NAND: 512 MiB
] MMC: FSL_SDHC: 0
] EEPROM: Invalid ID (ff ff ff ff)
] PCIe1: Root Complex, no link, regs @ 0xfe240000
] PCIe1: Bus 00 - 00
] PCIe2: Root Complex, x2 gen1, regs @ 0xfe250000
] 02:00.0 - 1957:0808 - Processor
] PCIe2: Bus 01 - 02
] PCIe3: disabled
] PCIe4: Endpoint, no link, regs @ 0xfe270000
] PCIe4: Bus 03 - 03
] In: serial
] Out: serial
] Err: serial
] Net: Fman1: Uploading microcode version 106.4.14
] PHY reset timed out
[559/670] p:543 f:6 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_64: spintrcritical11.exe
<<skipping passes>>
[670/670] p:654 f:6 u:5 e:0 I:0 B:3 t:0 i:1 W:0 | powerpc/qoriq_e6500_64: tmtimer01.exe
Passed: 655
Failed: 6
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 670
Failures:
spintrcritical10.exe
ada_sp20.exe
ada_sp15.exe
ada_tm20.exe
ada_sp01.exe
ada_sp04.exe
User Input:
termios.exe
capture.exe
monitor.exe
fileio.exe
top.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Invalid:
sp20.exe
Average test time: 0:00:11.242691
Testing time : 2:05:32.603625
More information about the build
mailing list