Build Linux: PASSED 5/rtems-or1k.bset on x86_64-linux-gnu
joel at rtems.org
joel at rtems.org
Wed Jun 20 00:38:50 UTC 2018
RTEMS Source Builder - Set Builder, 5 (9e95b79989a3)
Host: Linux-3.10.0-862.2.3.el7.x86_64-x86_64-with-centos-7.5.1804-Core
Linux rtbf64c.rtems.com 3.10.0-862.2.3.el7.x86_64 #1 SMP Wed May 9
18:05:47 UTC 2018 x86_64 x86_64
Build Time: 0:05:59.306306
Output
======
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
installing: autoconf-2.69-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: automake-1.12.6-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Set: Time 0:00:15.387027
Build Set: Time 0:00:24.039260
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-linux-gnu-1
building: expat-2.1.0-x86_64-linux-gnu-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
config: tools/rtems-binutils-2.30.cfg
package: or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1
building: or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-2.30.cfg -> or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-2.30.cfg -> or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
package: or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1
warning: gcc-4.9.3-or1k.patch: no hash found
building: or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1
reporting: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg -> or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg -> or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
building: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1.xml
config: tools/rtems-gdb-7.11-2.cfg
package: or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1
warning: gdb-7.11-or1k.patch: no hash found
building: or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-7.11-2.cfg -> or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-7.11-2.cfg -> or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1.xml
installing: expat-2.1.0-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
installing: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1 -> /home/joel/rtems-work/tools/5
installing: or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1 -> /home/joel/rtems-work/tools/5
cleaning: expat-2.1.0-x86_64-linux-gnu-1
cleaning: or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1
cleaning: or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1
cleaning: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
cleaning: or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:33:22 2018
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--verbose \
--prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
--exec-prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
--mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
make -j 12 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:33:22 2018
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--verbose \
--prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
--exec-prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
--mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
make -j 12 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:33:57 2018
==============================================================================
Report: tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.30.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1
Config: tools/rtems-binutils-2.30.cfg
Summary:
Binutils v2.30 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2.30
Release:
1
Sources: 1
1: ftp://ftp.gnu.org/gnu/binutils/binutils-2.30.tar.bz2
sha512: c3ce91aa20f058ec589bf18c722bf651331b394db6378900cc813cc0eea3a331a96584d5ae090630b627369510397dccc9edfcd43d4aeefc99579f277a05c72c
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.30"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-linux-gnu" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--target=or1k-rtems5 \
--verbose --disable-nls \
--disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
--exec-prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
--mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
make -j 12 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:33:57 2018
==============================================================================
Report: tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.30.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.30.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-binutils-2.30-x86_64-linux-gnu-1
Config: tools/rtems-binutils-2.30.cfg
Summary:
Binutils v2.30 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2.30
Release:
1
Sources: 1
1: ftp://ftp.gnu.org/gnu/binutils/binutils-2.30.tar.bz2
sha512: c3ce91aa20f058ec589bf18c722bf651331b394db6378900cc813cc0eea3a331a96584d5ae090630b627369510397dccc9edfcd43d4aeefc99579f277a05c72c
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.30"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-linux-gnu" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--target=or1k-rtems5 \
--verbose --disable-nls \
--disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
--exec-prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
--mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
make -j 12 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/bin/or1k-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/share/man/man1/or1k-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:36:57 2018
==============================================================================
Report: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1
Config: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
Summary:
GCC v4.9.3 and Newlib v3.0.0 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://gcc.gnu.org/
Version:
4.9.3
Release:
1
Sources: 5
1: ftp://sourceware.org/pub/newlib/newlib-3.0.0.tar.gz
sha512: d4730ce9a4fc4e62052e89d20d4a3855a103b3d1a2818e94c7a68626db285aa8db8e56a684103731916bfba3e581db88e3a93264034ea0f2880ee8976283c04f
2: ftp://ftp.gnu.org/gnu/gcc/gcc-4.9.3/gcc-4.9.3.tar.bz2
sha512: 9ac57377a6975fc7adac704ec81355262b9f537def6955576753b87715470a20ee6a2a3144a79cc8fcba3443f7b44c7337d79d704b522d053f54f79aa6b442df
3: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2
sha256: 1f588aaccc41bb9aed946f9fe38521c26d8b290d003c5df807f65690f2aadec9
4: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz
sha256: ae79f8d41d8a86456b68607e9ca398d00f8b7342d1d83bcf4428178ac45380c7
5: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2
sha256: e1977099bb494319c0f0c1f85759050c418a56884e9c6cef1c540b9b13e38e7f
Patches: 1
1: https://github.com/openrisc/or1k-gcc/releases/download/or1k-4.9.3-release/gcc-4.9.3-or1k.patch
No checksum
2: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/Make-lang.in;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
3: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.gperf;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
4: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.h;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
5: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/except.c;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
Preparation:
build_top=$(pwd)
gcc_source="gcc-4.9.3"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib="newlib-3.0.0"
%setup source newlib -q -D -n newlib-3.0.0
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_mpfr="mpfr-3.0.1"
%setup source mpfr -q -D -n mpfr-3.0.1
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-0.8.2"
%setup source mpc -q -D -n mpc-0.8.2
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-5.0.5"
%setup source gmp -q -D -n gmp-5.0.5
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 9e95b79989a35befdef1ea363018878298ba4d88, Newlib 3.0.0" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-linux-gnu" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/home/joel/rtems-work/tools/5 \
--bindir=/home/joel/rtems-work/tools/5/bin \
--exec_prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include \
--libdir=/home/joel/rtems-work/tools/5/lib \
--libexecdir=/home/joel/rtems-work/tools/5/libexec \
--mandir=/home/joel/rtems-work/tools/5/share/man \
--infodir=/home/joel/rtems-work/tools/5/share/info \
--datadir=/home/joel/rtems-work/tools/5/share \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--target=or1k-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
\
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 12 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/bin/or1k-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:36:59 2018
==============================================================================
Report: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-gcc-4.9.3-newlib-3.0.0-x86_64-linux-gnu-1
Config: tools/rtems-gcc-4.9.3-newlib-3.0.0.cfg
Summary:
GCC v4.9.3 and Newlib v3.0.0 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://gcc.gnu.org/
Version:
4.9.3
Release:
1
Sources: 5
1: ftp://sourceware.org/pub/newlib/newlib-3.0.0.tar.gz
sha512: d4730ce9a4fc4e62052e89d20d4a3855a103b3d1a2818e94c7a68626db285aa8db8e56a684103731916bfba3e581db88e3a93264034ea0f2880ee8976283c04f
2: ftp://ftp.gnu.org/gnu/gcc/gcc-4.9.3/gcc-4.9.3.tar.bz2
sha512: 9ac57377a6975fc7adac704ec81355262b9f537def6955576753b87715470a20ee6a2a3144a79cc8fcba3443f7b44c7337d79d704b522d053f54f79aa6b442df
3: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2
sha256: 1f588aaccc41bb9aed946f9fe38521c26d8b290d003c5df807f65690f2aadec9
4: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz
sha256: ae79f8d41d8a86456b68607e9ca398d00f8b7342d1d83bcf4428178ac45380c7
5: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2
sha256: e1977099bb494319c0f0c1f85759050c418a56884e9c6cef1c540b9b13e38e7f
Patches: 1
1: https://github.com/openrisc/or1k-gcc/releases/download/or1k-4.9.3-release/gcc-4.9.3-or1k.patch
No checksum
2: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/Make-lang.in;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
3: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.gperf;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
4: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/cfns.h;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
5: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/cp/except.c;h=b09fb02bb4c0d16fc2c842bec4069c033897b5f2;hp=e98beb1e33e4bcc4943361c559ae71b7eb345346;hb=1e5f1089dec3af328fd03125d6778f666d0bd4e4;hpb=88375bb2ba8b9004a9924cdae894d7ff32972652
No checksum
Preparation:
build_top=$(pwd)
gcc_source="gcc-4.9.3"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib="newlib-3.0.0"
%setup source newlib -q -D -n newlib-3.0.0
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_mpfr="mpfr-3.0.1"
%setup source mpfr -q -D -n mpfr-3.0.1
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-0.8.2"
%setup source mpc -q -D -n mpc-0.8.2
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-5.0.5"
%setup source gmp -q -D -n gmp-5.0.5
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 9e95b79989a35befdef1ea363018878298ba4d88, Newlib 3.0.0" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-linux-gnu" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/home/joel/rtems-work/tools/5 \
--bindir=/home/joel/rtems-work/tools/5/bin \
--exec_prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include \
--libdir=/home/joel/rtems-work/tools/5/lib \
--libexecdir=/home/joel/rtems-work/tools/5/libexec \
--mandir=/home/joel/rtems-work/tools/5/share/man \
--infodir=/home/joel/rtems-work/tools/5/share/info \
--datadir=/home/joel/rtems-work/tools/5/share \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--target=or1k-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
\
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 12 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/bin/or1k-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:37:12 2018
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 845054a2ac1f470c5dd79361646be0243bb91160 for host x86_64-linux-gnu
URL:
http://www.rtems.org/
Version:
845054a2ac1f470c5dd79361646be0243bb91160
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160.tar.bz2
sha512: d95f00d5e8457fed98853da3e65ef0c18393bf4bb4b8ef59d1ab296f2661dba9771c18075809a6c6c3b186a3823fc86f64230bb4b808f40a617dc235902155c5
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
RT_HOST="--host=x86_64-linux-gnu"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-work/tools/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT_WAF install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:37:12 2018
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 845054a2ac1f470c5dd79361646be0243bb91160 for host x86_64-linux-gnu
URL:
http://www.rtems.org/
Version:
845054a2ac1f470c5dd79361646be0243bb91160
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160.tar.bz2
sha512: d95f00d5e8457fed98853da3e65ef0c18393bf4bb4b8ef59d1ab296f2661dba9771c18075809a6c6c3b186a3823fc86f64230bb4b808f40a617dc235902155c5
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-845054a2ac1f470c5dd79361646be0243bb91160
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
RT_HOST="--host=x86_64-linux-gnu"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-work/tools/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT_WAF install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:38:42 2018
==============================================================================
Report: tools/rtems-gdb-7.11-2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-7.11-2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-7.11-2.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1
Config: tools/rtems-gdb-7.11-2.cfg
Summary:
GDB v7.11 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
7.11
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-7.11.tar.xz
sha256: 7a434116cb630d77bb40776e8f5d3937bed11dea56bafebb4d2bc5dd389fe5c1
Patches: 1
1: https://github.com/openrisc/binutils-gdb/releases/download/gdb-7.11-or1k-release/gdb-7.11-or1k.patch
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-7.11"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-linux-gnu" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--target=or1k-rtems5 \
--verbose --disable-nls \
--disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--disable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python \
--prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
--exec-prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
--mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
make -j 12 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Jun 19 19:38:43 2018
==============================================================================
Report: tools/rtems-gdb-7.11-2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: ssh://joel@dispatch.rtems.org/data/git/rtems-source-builder.git
Status:
Clean
Head:
Commit: 9e95b79989a35befdef1ea363018878298ba4d88
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-7.11-2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-7.11-2.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-gdb-7.11-x86_64-linux-gnu-1
Config: tools/rtems-gdb-7.11-2.cfg
Summary:
GDB v7.11 for target or1k-rtems5 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
7.11
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-7.11.tar.xz
sha256: 7a434116cb630d77bb40776e8f5d3937bed11dea56bafebb4d2bc5dd389fe5c1
Patches: 1
1: https://github.com/openrisc/binutils-gdb/releases/download/gdb-7.11-or1k-release/gdb-7.11-or1k.patch
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-7.11"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-linux-gnu" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-linux-gnu --host=x86_64-linux-gnu \
--target=or1k-rtems5 \
--verbose --disable-nls \
--disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--disable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python \
--prefix=/home/joel/rtems-work/tools/5 --bindir=/home/joel/rtems-work/tools/5/bin \
--exec-prefix=/home/joel/rtems-work/tools/5 \
--includedir=/home/joel/rtems-work/tools/5/include --libdir=/home/joel/rtems-work/tools/5/lib \
--mandir=/home/joel/rtems-work/tools/5/share/man --infodir=/home/joel/rtems-work/tools/5/share/info
make -j 12 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/5/share/info/dir
cd ${build_top}
More information about the build
mailing list