[rtems-test] arm/xilinx_zynq_zedboard: RTEMS_POSIX_API, RTEMS_SMP: Passed:614 Failed:2 Timeout:3 Invalid:3 Wrong:0

Chris Johns chrisj at rtems.org
Wed Nov 7 12:39:19 UTC 2018


Testing time     : 2:31:53.696794
Average test time: 0:00:14.466185

Host
====
FreeBSD-11.1-RELEASE-p4-amd64-64bit-ELF (FreeBSD ruru 11.1-RELEASE-p4 FreeBSD 11.1-RELEASE-p4 #0: Tue Nov 14 06:12:40 UTC 2017     root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 amd64)

Configuration
=============
Version: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
Build  : RTEMS_POSIX_API,RTEMS_SMP
Tools  : 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)

Summary
=======

Passed:        614
Failed:          2
User Input:      5
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         3
Invalid:         3
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
------------------
Total:         630

Failures:
 dl06.exe
 spconsole01.exe
User Input:
 monitor.exe
 termios.exe
 top.exe
 capture.exe
 fileio.exe
Benchmark:
 dhrystone.exe
 linpack.exe
 whetstone.exe
Timeouts:
 dl02.exe
 spintrcritical07.exe
 spintrcritical15.exe
Invalid:
 spinternalerror01.exe
 spsysinit01.exe
 sptimecounter01.exe
Log
===

RTEMS Testing - Tester, 5.0.not_released
 Command Line: /opt/work/rtems/5/bin/rtems-test --rtems-tools=/opt/work/rtems/5 --rtems-bsp=xilinx_zynq_zedboard --user-config=/home/chris/.rtemstesterrc --log=l.txt --mail --mail-to=build at rtems.org --mail-from=chrisj at rtems.org ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/
 Python: 3.6.2 (default, Nov  4 2017, 01:16:10) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
Host: FreeBSD-11.1-RELEASE-p4-amd64-64bit-ELF (FreeBSD ruru 11.1-RELEASE-p4 FreeBSD 11.1-RELEASE-p4 #0: Tue Nov 14 06:12:40 UTC 2017     root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 amd64)
[  1/630] p:0   f:0   u:0   e:0   I:0   B:0   t:0   i:0   W:0   | arm/xilinx_zynq_zedboard: dhrystone.exe
 <<skipping passes>>
[ 91/630] p:87  f:0   u:0   e:0   I:0   B:3   t:0   i:0   W:0   | arm/xilinx_zynq_zedboard: dl02.exe
Result: timeout    Time: 0:03:14.139574 dl02.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl02.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl02.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl02.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 21:25:57 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    105297 Bytes = 102.83 kB = 0.10 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl02.exe.img
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *########
] 	 6.3 MiB/s
] done
] Bytes transferred = 105361 (19b91 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    105297 Bytes = 102.8 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 
] 
=>  test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] *** TEST VERSION: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] load: /dl02-o1.o
] handle: 0x21e860 has unresolved externals
] load: /dl02-o2.o
] handle: 0x21f190 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o1.c]
]   0: 1
]   1: 2
]   2: 3
]   3: 4
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o2.c]
]   0: 1
]   1: 2
]   2: 3
]   3: 4
] *** TIMEOUT TIMEOUT
[ 92/630] p:87  f:0   u:0   e:0   I:0   B:3   t:1   i:0   W:0   | arm/xilinx_zynq_zedboard: dl03.exe
 <<skipping passes>>
[ 95/630] p:90  f:0   u:0   e:0   I:0   B:3   t:1   i:0   W:0   | arm/xilinx_zynq_zedboard: dl06.exe
Result: failed     Time: 0:00:08.157438 dl06.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl06.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl06.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl06.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 21:29:56 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    82836 Bytes = 80.89 kB = 0.08 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl06.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 	 6.6 MiB/s
] done
] Bytes transferred = 82900 (143d4 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    82836 Bytes = 80.9 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 
] 
=>  test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] 
] load: /dl06.rap
] THM_CALL/JUMP24 overflow
] dlopen failed: 
] 
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] executing thread ID: 0x08a010001
] executing thread name: UI1 
] 
=>  target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=>  tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
=>  target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 96/630] p:90  f:1   u:0   e:0   I:0   B:3   t:1   i:0   W:0   | arm/xilinx_zynq_zedboard: dumpbuf01.exe
 <<skipping passes>>
[453/630] p:442 f:1   u:5   e:0   I:0   B:3   t:1   i:0   W:0   | arm/xilinx_zynq_zedboard: spconsole01.exe
Result: failed     Time: 0:00:07.447451 spconsole01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 22:57:24 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    65235 Bytes = 63.71 kB = 0.06 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (262 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 	 7.8 MiB/s
] done
] Bytes transferred = 65299 (ff13 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    65235 Bytes = 63.7 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 
] 
=>  test start: SPCONSOLE 1
] *** BEGIN OF TEST SPCONSOLE 1 ***
] *** TEST VERSION: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spconsole01/init.c: 244 rv == 0
] 
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] RTEMS tools: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] executing thread ID: 0x08a010001
] executing thread name: UI1 
] 
=>  target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=>  tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
=>  target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[454/630] p:442 f:2   u:5   e:0   I:0   B:3   t:1   i:0   W:0   | arm/xilinx_zynq_zedboard: spcontext01.exe
 <<skipping passes>>
[502/630] p:490 f:2   u:5   e:0   I:0   B:3   t:1   i:0   W:0   | arm/xilinx_zynq_zedboard: spinternalerror01.exe
Result: invalid    Time: 0:00:07.660219 spinternalerror01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 23:07:11 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    28229 Bytes = 27.57 kB = 0.03 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: re-requesting exe; target must have reset
[503/630] p:490 f:2   u:5   e:0   I:0   B:3   t:1   i:1   W:0   | arm/xilinx_zynq_zedboard: spinternalerror02.exe
 <<skipping passes>>
[511/630] p:498 f:2   u:5   e:0   I:0   B:3   t:1   i:1   W:0   | arm/xilinx_zynq_zedboard: spintrcritical07.exe
Result: timeout    Time: 0:03:12.875476 spintrcritical07.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 23:09:34 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    44231 Bytes = 43.19 kB = 0.04 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] ... done
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07.exe.img
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (8 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 	 6 MiB/s
] done
] Bytes transferred = 44295 (ad07 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    44231 Bytes = 43.2 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 
] 
=>  test start: SPINTRCRITICAL 7
] *** BEGIN OF TEST SPINTRCRITICAL 7 ***
] *** TEST VERSION: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - There is no way for the test to know if it hits the case
] Init - Variation is: Priority/Restart Search Task (Backward)
] *** TIMEOUT TIMEOUT
[512/630] p:498 f:2   u:5   e:0   I:0   B:3   t:2   i:1   W:0   | arm/xilinx_zynq_zedboard: spintrcritical08.exe
 <<skipping passes>>
[519/630] p:505 f:2   u:5   e:0   I:0   B:3   t:2   i:1   W:0   | arm/xilinx_zynq_zedboard: spintrcritical15.exe
Result: timeout    Time: 0:03:12.454539 spintrcritical15.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical15.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical15.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical15.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 23:15:19 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    44207 Bytes = 43.17 kB = 0.04 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical15.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 	 7 MiB/s
] done
] Bytes transferred = 44271 (acef hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    44207 Bytes = 43.2 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 
] 
=>  test start: SPINTRCRITICAL 15
] *** BEGIN OF TEST SPINTRCRITICAL 15 ***
] *** TEST VERSION: 5.0.0.fa0adf361826e6b79ae408e31ce13ddf82e275fe
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API RTEMS_SMP
] *** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 96c414c8ff0b8715111db8d0114df284ddd0d14c, Newlib 08eab6396f678cf5e5968acaed0bae9fd129983b)
] Init - Trying to generate timeout of a thread while another is blocking
] Init -   on the same thread queue
] Init - There is no way for the test to know if it hits the case
] Init - rtems_semaphore_create - OK
] Init - rtems_task_create - OK
] *** TIMEOUT TIMEOUT
[520/630] p:505 f:2   u:5   e:0   I:0   B:3   t:3   i:1   W:0   | arm/xilinx_zynq_zedboard: spintrcritical16.exe
 <<skipping passes>>
[564/630] p:549 f:2   u:5   e:0   I:0   B:3   t:3   i:1   W:0   | arm/xilinx_zynq_zedboard: spsysinit01.exe
Result: invalid    Time: 0:00:07.633010 spsysinit01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 23:28:29 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    44426 Bytes = 43.38 kB = 0.04 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] ... done
] BOOTP broadcast 1
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: re-requesting exe; target must have reset
[565/630] p:549 f:2   u:5   e:0   I:0   B:3   t:3   i:2   W:0   | arm/xilinx_zynq_zedboard: spsyslock01.exe
 <<skipping passes>>
[574/630] p:558 f:2   u:5   e:0   I:0   B:3   t:3   i:2   W:0   | arm/xilinx_zynq_zedboard: sptimecounter01.exe
Result: invalid    Time: 0:00:07.085542 sptimecounter01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed Nov  7 23:29:57 2018
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    30825 Bytes = 30.10 kB = 0.03 MB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (8 ms)
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *###
] 	 4.9 MiB/s
] done
] Bytes transferred = 30889 (78a9 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    30825 Bytes = 30.1 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
=>  tftp: re-requesting exe; target must have reset
[575/630] p:558 f:2   u:5   e:0   I:0   B:3   t:3   i:3   W:0   | arm/xilinx_zynq_zedboard: sptimecounter02.exe
 <<skipping passes>>
[630/630] p:613 f:2   u:5   e:0   I:0   B:3   t:3   i:3   W:0   | arm/xilinx_zynq_zedboard: tmtimer01.exe

Passed:        614
Failed:          2
User Input:      5
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         3
Invalid:         3
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
------------------
Total:         630
Failures:
 dl06.exe
 spconsole01.exe
User Input:
 monitor.exe
 termios.exe
 top.exe
 capture.exe
 fileio.exe
Benchmark:
 dhrystone.exe
 linpack.exe
 whetstone.exe
Timeouts:
 dl02.exe
 spintrcritical07.exe
 spintrcritical15.exe
Invalid:
 spinternalerror01.exe
 spsysinit01.exe
 sptimecounter01.exe
Average test time: 0:00:14.466185
Testing time     : 2:31:53.696794


More information about the build mailing list