[rtems-test] arm/beagleboneblack: RTEMS_POSIX_API: Passed:571 Failed:9 Timeout:0 Invalid:0 Wrong:1
chrisj at rtems.org
chrisj at rtems.org
Mon Aug 12 09:58:46 UTC 2019
Testing time : 2:49:14.500246
Average test time: 0:00:17.211017
Host
====
FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
Configuration
=============
Version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
Build : RTEMS_POSIX_API
Tools : 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
Summary
=======
Passed: 571
Failed: 9
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 0
Wrong Version: 1
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
psx10.exe
psxautoinit02.exe
psxcond01.exe
psxinttypes01.exe
spcache01.exe
spconfig02.exe
spintrcritical10.exe
tmcontext01.exe
tmtimer01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Wrong Version:
dl06.exe
Log
===
RTEMS Testing - Tester, 5.0.not_released
Command Line: /opt/work/rtems/5/bin/rtems-test --log=bbb.txt --rtems-bsp=beagleboneblack --user-config=/home/chris/.rtemstesterrc --mail --mail-to=build at rtems.org --mail-from=chrisj at rtems.org arm-rtems5/c/beagleboneblack/testsuites
Host: FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64
Python: 3.6.6 (default, Oct 2 2018, 01:22:29) [GCC 4.2.1 Compatible FreeBSD Clang 6.0.0 (tags/RELEASE_600/final 326565)]
Host: FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
[ 1/590] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | arm/beagleboneblack: dhrystone.exe
<<skipping passes>>
[ 95/590] p:91 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl06.exe
Result: wrong-version Time: 0:00:15.658954 dl06.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 17:35:33 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 93456 Bytes = 91.27 KiB = 0.09 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#######
] 2.6 MiB/s
] done
] Bytes transferred = 93520 (16d50 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 7:35:33 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 93456 Bytes = 91.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 5.0.0.8c66acc8dcb4d459c1f61f2d5f62a23d14e3af46-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] load: /dl06.rap
] ]]] 1 sync code: 0x80112ad0 000024b0
] ]]] 1 sync code: 0x80114f48 00000338
] ]]] 1 sync code: 0x80112ad0 000024b0
] ]]] 1 sync code: 0x80114f48 00000338
] handle: 0x80111b08 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl06/dl06-o1.c]
] libm: lcong48
] libm: atan2
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x66666666 R8 = 0x00000000
] R1 = 0x401c6666 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x40408000 R11 = 0x00000000
] R4 = 0x66666666 R12 = 0xa0000113
] R5 = 0x401c6666 SP = 0x80106af0
] R6 = 0x00000000 LR = 0x8011351c
] R7 = 0x40408000 PC = 0x80113528
] CPSR = 0x60000113 VEC = 0x00000001
] RTEMS version: 5.0.0.8c66acc8dcb4d459c1f61f2d5f62a23d14e3af46-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 96/590] p:91 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: dl07.exe
<<skipping passes>>
[162/590] p:153 f:0 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psx10.exe
Result: failed Time: 0:00:07.493742 psx10.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 17:53:38 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 38568 Bytes = 37.66 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.8 MiB/s
] done
] Bytes transferred = 38632 (96e8 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 7:53:38 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38568 Bytes = 37.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: PSX 10
] *** BEGIN OF TEST PSX 10 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init: pthread_condattr_init
] Init: pthread_condattr_init - EINVAL (attribute invalid)
] Init: pthread_condattr_destroy
] Init: pthread_condattr_destroy - EINVAL (attribute invalid)
] Init: pthread_condattr_init
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_SHARED
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_PRIVATE
] Init: pthread_condattr_setpshared - EINVAL (attribute invalid)
] Init: pthread_condattr_setpshared - EINVAL (pshared invalid)
] Init: pthread_condattr_getpshared - 0
] Init: pthread_condattr_getpshared - EINVAL (attribute invalid)
] Init: pthread_cond_init - NULL attr
] Init: pthread_cond_init - EINVAL (attr not initialized)
] Init: pthread_cond_destroy - EINVAL (cond invalid)
] Init: pthread_cond_init - EINVAL (invalid pshared)
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_SHARED
] Init: pthread_cond_init - OK
] Init: pthread_cond_destroy - OK
] Init: pthread_cond_init - attr
]
] Init: sleep to switch to Task_1
] Task_1: ID is 0x0b010002
] Task_1: pthread_cond_wait
] status = 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psx10/init.c: 267 status == EBUSY
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[163/590] p:153 f:1 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psx11.exe
<<skipping passes>>
[174/590] p:164 f:1 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psxautoinit02.exe
Result: failed Time: 0:00:15.655388 psxautoinit02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 17:56:28 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 37865 Bytes = 36.98 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.8 MiB/s
] done
] Bytes transferred = 37929 (9429 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 7:56:28 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 37865 Bytes = 37 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: PSXAUTOINIT 2
] *** BEGIN OF TEST PSXAUTOINIT 2 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init - pthread_cond_broadcast - auto initialize - OK
] Init - pthread_cond_signal - auto initialize - OK
] Init - pthread_cond_init - auto initialize - OK
] Init - pthread_mutex_lock - OK
] Init - pthread_cond_timedwait - auto initialize - OK
] Init - pthread_mutex_unlock - OK
] Init - pthread_mutex_destroy - OK
] Init - pthread_cond_destroy - OK
]
] cond destroy OK FAILED -- expected (0 - Success) got (16 - Device or resource busy)
]
] FAILED -- errno (0 - Success)
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[175/590] p:164 f:2 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psxbarrier01.exe
<<skipping passes>>
[187/590] p:176 f:2 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psxcond01.exe
Result: failed Time: 0:00:15.726577 psxcond01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 17:59:27 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 38351 Bytes = 37.45 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.6 MiB/s
] done
] Bytes transferred = 38415 (960f hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 7:59:27 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38351 Bytes = 37.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: PSXCOND 1
] *** BEGIN OF TEST PSXCOND 1 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psxcond01/init.c: 62 eno == 0
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[188/590] p:176 f:3 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psxcond02.exe
<<skipping passes>>
[207/590] p:195 f:3 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psxinttypes01.exe
Result: failed Time: 0:00:14.472957 psxinttypes01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 18:05:16 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 41549 Bytes = 40.58 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe.img
] T ###
] 7.8 KiB/s
] done
] Bytes transferred = 41613 (a28d hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 8:05:16 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 41549 Bytes = 40.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: PSXINTTYPE 01
] *** BEGIN OF TEST PSXINTTYPE 01 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] strtoimax Testcases....
] Valid Inputs - Positive Number
] Final string pointed by endptr
] Valid Inputs - Negative Number
] Final string pointed by endptr
] Valid Input - Positive Number - Number out of Range
] Valid Input - Negative Number - Number out of Range
] Invalid Input - Send NULL Pointer
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x801025f8 R8 = 0x0000000a
] R1 = 0x8005310d R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x0000000a R11 = 0x00000000
] R4 = 0x80102390 R12 = 0x01010101
] R5 = 0x00000000 SP = 0x80105a78
] R6 = 0x00000000 LR = 0x80000784
] R7 = 0x00000000 PC = 0x800107fc
] CPSR = 0x60000113 VEC = 0x00000004
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (16 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[208/590] p:195 f:4 u:4 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: psxitimer.exe
<<skipping passes>>
[404/590] p:389 f:4 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: spcache01.exe
Result: failed Time: 0:00:15.803804 spcache01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 19:02:25 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 34116 Bytes = 33.32 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.5 MiB/s
] done
] Bytes transferred = 34180 (8584 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 9:02:25 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 34116 Bytes = 33.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] data cache flush and invalidate test
] data cache operations by line passed the test (copy-back cache detected)
] data cache line size 32 bytes
] data cache size 262144 bytes
] data cache level 1 size 262144 bytes
] load 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] store 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] instruction cache line size 32 bytes
] instruction cache size 16 bytes
] instruction cache level 1 size 16 bytes
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00000001 R8 = 0x60000113
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x00000000
] R4 = 0x00000001 R12 = 0x0000001f
] R5 = 0x00000000 SP = 0x80106c48
] R6 = 0x00000001 LR = 0x80001864
] R7 = 0x00000000 PC = 0x8000263c
] CPSR = 0x00000193 VEC = 0x00000001
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (14 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[405/590] p:389 f:5 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: spcbssched01.exe
<<skipping passes>>
[412/590] p:396 f:5 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: spconfig02.exe
Result: failed Time: 0:00:15.772744 spconfig02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 19:05:04 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 28233 Bytes = 27.57 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *##
] 2.5 MiB/s
] done
] Bytes transferred = 28297 (6e89 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 9:05:04 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 28233 Bytes = 27.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPCONFIG 2
] *** BEGIN OF TEST SPCONFIG 2 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spconfig02/init.c: 378 name_of_id == rtems_build_name('I', 'D', 'L', 'E')
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[413/590] p:396 f:6 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: spconsole01.exe
<<skipping passes>>
[474/590] p:457 f:6 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: spintrcritical10.exe
Result: failed Time: 0:00:42.159722 spintrcritical10.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 19:24:58 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 35102 Bytes = 34.28 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (5 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.1 MiB/s
] done
] Bytes transferred = 35166 (895e hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 9:24:58 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 35102 Bytes = 34.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init - Trying to generate any satisfied before timeout while blocking on event
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical10/init.c: 144 ctx->hit
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[475/590] p:457 f:7 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: spintrcritical11.exe
<<skipping passes>>
[586/590] p:568 f:7 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: tmcontext01.exe
Result: failed Time: 0:00:11.573187 tmcontext01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 19:57:36 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 32369 Bytes = 31.61 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.6 MiB/s
] done
] Bytes transferred = 32433 (7eb1 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 9:57:36 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 32369 Bytes = 31.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: TMCONTEXT 1
] *** BEGIN OF TEST TMCONTEXT 1 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] <Test>
] <ContextSwitchTest environment="normal">
] <Sample functionNestLevel="0">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="1">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="2">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="3">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="4">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="5">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="6">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="7">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="8">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="9">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="10">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="11">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="12">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="13">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="14">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="15">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] </ContextSwitchTest>
] <ContextSwitchTest environment="dirty">
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00010000 R8 = 0x00000001
] R1 = 0x00010000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x80114b1c
] R4 = 0x00000000 R12 = 0x00000008
] R5 = 0x00000000 SP = 0x80114af8
] R6 = 0x00000000 LR = 0x8000065c
] R7 = 0x00000020 PC = 0x80000c60
] CPSR = 0x00000193 VEC = 0x00000001
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[587/590] p:568 f:8 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: tmfine01.exe
<<skipping passes>>
[590/590] p:571 f:8 u:6 e:0 I:0 B:3 t:0 i:0 W:1 | arm/beagleboneblack: tmtimer01.exe
Result: failed Time: 0:00:09.749624 tmtimer01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe
=> Image Name: RTEMS
=> Created: Mon Aug 12 19:58:35 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 33265 Bytes = 32.49 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe.img
] T ###
] 5.9 KiB/s
] done
] Bytes transferred = 33329 (8231 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-08-12 9:58:35 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 33265 Bytes = 32.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] *** TEST VERSION: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] <TMTimer01 timerCount="65504">
] <Sample>
] <ActiveTimers>0</ActiveTimers>
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80103424 R8 = 0x00000020
] R1 = 0x0000fff8 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x00000000
] R4 = 0x12010001 R12 = 0x00010000
] R5 = 0x8000d790 SP = 0x80106328
] R6 = 0x00000000 LR = 0x80000570
] R7 = 0x00000008 PC = 0x80000fac
] CPSR = 0x00000113 VEC = 0x00000001
] RTEMS version: 5.0.0.df2565050202f448733407a1c000117ec7ffdb67-modified
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (7 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
=> target off: cs-pw-ctl 1 off 1
Passed: 571
Failed: 9
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 0
Wrong Version: 1
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
psx10.exe
psxautoinit02.exe
psxcond01.exe
psxinttypes01.exe
spcache01.exe
spconfig02.exe
spintrcritical10.exe
tmcontext01.exe
tmtimer01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Wrong Version:
dl06.exe
Average test time: 0:00:17.211017
Testing time : 2:49:14.500246
More information about the build
mailing list