Build Darwin: PASSED 5/rtems-powerpc on x86_64-apple-darwin18.7.0
chrisj at rtems.org
chrisj at rtems.org
Mon Aug 26 12:02:15 UTC 2019
RTEMS Source Builder - Set Builder, 5 (d7f11a79bca2)
Host: Darwin-18.7.0-x86_64-i386-64bit
Darwin mohua 18.7.0 Darwin Kernel Version 18.7.0: Thu Jun 20 18:42:21 PDT
2019; root:xnu-4903.270.47~4/RELEASE_X86_64 x86_64 i386
Build Time: 1:09:33.063073
Sizes
=====
Maximum build usage: 6.303GB
Total size: 1.318GB
Installed : 1008.002MB
Sources: 340.882MB
Patches: 359.971KB
Output
======
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin18.7.0-1
building: autoconf-2.69-x86_64-apple-darwin18.7.0-1
sizes: autoconf-2.69-x86_64-apple-darwin18.7.0-1: 10.540MB (installed: 3.034MB)
cleaning: autoconf-2.69-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin18.7.0-1
building: automake-1.12.6-x86_64-apple-darwin18.7.0-1
sizes: automake-1.12.6-x86_64-apple-darwin18.7.0-1: 10.346MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin18.7.0-1.xml
staging: autoconf-2.69-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris-staging
staging: automake-1.12.6-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris-staging
cleaning: autoconf-2.69-x86_64-apple-darwin18.7.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin18.7.0-1
Build Sizes: usage: 15.839MB total: 346.532MB (sources: 340.882MB, patches: 359.971KB, installed 5.298MB)
Build Set: Time 0:00:15.741899
Build Set: Time 0:00:27.514256
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-apple-darwin18.7.0-1
building: expat-2.1.0-x86_64-apple-darwin18.7.0-1
sizes: expat-2.1.0-x86_64-apple-darwin18.7.0-1: 5.753MB (installed: 776.297KB)
cleaning: expat-2.1.0-x86_64-apple-darwin18.7.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin18.7.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
building: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
sizes: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1: 422.880MB (installed: 17.145MB)
cleaning: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-binutils-2.32.cfg
package: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
building: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
sizes: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1: 344.843MB (installed: 43.718MB)
cleaning: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-binutils-2.32.cfg -> powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-binutils-2.32.cfg -> powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
building: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
sizes: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1: 5.319GB (installed: 937.724MB)
cleaning: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg -> powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg -> powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1
building: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1
sizes: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1: 107.423MB (installed: 8.656MB)
cleaning: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1.xml
installing: expat-2.1.0-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1 -> /opt/work/builds/tools/5
cleaning: expat-2.1.0-x86_64-apple-darwin18.7.0-1
cleaning: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
cleaning: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
cleaning: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
cleaning: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1
Build Sizes: usage: 6.303GB total: 1.318GB (sources: 340.882MB, patches: 359.971KB, installed 1008.002MB)
installing: 5/rtems-powerpc -> /opt/work/builds/tools/5
clean staging: 5/rtems-powerpc
Staging Size: 5.305MB
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 20:53:23 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin18.7.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
./configure \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--verbose \
--prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
--exec-prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
--mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 20:53:23 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin18.7.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
./configure \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--verbose \
--prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
--exec-prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
--mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 20:59:13 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-apple-darwin18.7.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS=""
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--target=powerpc-rtems5 \
--verbose --disable-nls \
--disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--enable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python=/usr/bin/python \
--prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
--exec-prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
--mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 20:59:13 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-apple-darwin18.7.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS=""
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--target=powerpc-rtems5 \
--verbose --disable-nls \
--disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--enable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python=/usr/bin/python \
--prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
--exec-prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
--mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 21:01:19 2019
==============================================================================
Report: tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.32.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
Config: tools/rtems-binutils-2.32.cfg
Summary:
Binutils v2.32 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://sources.redhat.com/binutils
Version:
2.32
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.32.tar.bz2
sha512: 99ec7ed2b5ebfd3ac16cecb1567ec4a72f81ac30717002d601708f7547b2f8122ffcce076c986f22894aede33c54c73012210a4e973ba9b6e2d87a242a2bee12
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.32"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-apple-darwin18.7.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
../${source_dir_binutils}/configure \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--target=powerpc-rtems5 \
--verbose --disable-nls \
--disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
--exec-prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
--mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 21:01:20 2019
==============================================================================
Report: tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.32.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
Config: tools/rtems-binutils-2.32.cfg
Summary:
Binutils v2.32 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://sources.redhat.com/binutils
Version:
2.32
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.32.tar.bz2
sha512: 99ec7ed2b5ebfd3ac16cecb1567ec4a72f81ac30717002d601708f7547b2f8122ffcce076c986f22894aede33c54c73012210a4e973ba9b6e2d87a242a2bee12
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.32"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-apple-darwin18.7.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
../${source_dir_binutils}/configure \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--target=powerpc-rtems5 \
--verbose --disable-nls \
--disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
--exec-prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
--mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/powerpc-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/powerpc-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 22:00:46 2019
==============================================================================
Report: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
Config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
Summary:
GCC vfb371a33fa6 and Newlib v6661a67 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://gcc.gnu.org/
Version:
fb371a33fa6
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-fb371a33fa6.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-6661a67.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
2: https://devel.rtems.org/raw-attachment/ticket/3171/darwin-libstdcpp-noparallel-fix.patch
sha512: 01fa1bd55f19b01f10c41fdfe31356a7a4ddf265ebac8f4b974ccd1718181fd56bcb18a96e0492aa37511f08b37f94052a5557e21075604fceee06d80ffbb7d8
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-fb371a33fa6
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-6661a67
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.16.1"
%setup source isl -q -D -n isl-0.16.1
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB d7f11a79bca2e79e98218cc0c41c9be8a23509b9, Newlib 6661a67" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-apple-darwin18.7.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
../${source_dir_gcc}/configure \
--prefix=/opt/work/builds/tools/5 \
--bindir=/opt/work/builds/tools/5/bin \
--exec_prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include \
--libdir=/opt/work/builds/tools/5/lib \
--libexecdir=/opt/work/builds/tools/5/libexec \
--mandir=/opt/work/builds/tools/5/share/man \
--infodir=/opt/work/builds/tools/5/share/info \
--datadir=/opt/work/builds/tools/5/share \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--target=powerpc-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
--enable-libgomp \
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/bin/powerpc-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 22:00:47 2019
==============================================================================
Report: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
Config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
Summary:
GCC vfb371a33fa6 and Newlib v6661a67 for target powerpc-rtems5 on host x86_64-apple-darwin18.7.0
URL:
http://gcc.gnu.org/
Version:
fb371a33fa6
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-fb371a33fa6.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-6661a67.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
2: https://devel.rtems.org/raw-attachment/ticket/3171/darwin-libstdcpp-noparallel-fix.patch
sha512: 01fa1bd55f19b01f10c41fdfe31356a7a4ddf265ebac8f4b974ccd1718181fd56bcb18a96e0492aa37511f08b37f94052a5557e21075604fceee06d80ffbb7d8
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-fb371a33fa6
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-6661a67
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.16.1"
%setup source isl -q -D -n isl-0.16.1
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB d7f11a79bca2e79e98218cc0c41c9be8a23509b9, Newlib 6661a67" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-apple-darwin18.7.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LIBS_FOR_BUILS
../${source_dir_gcc}/configure \
--prefix=/opt/work/builds/tools/5 \
--bindir=/opt/work/builds/tools/5/bin \
--exec_prefix=/opt/work/builds/tools/5 \
--includedir=/opt/work/builds/tools/5/include \
--libdir=/opt/work/builds/tools/5/lib \
--libexecdir=/opt/work/builds/tools/5/libexec \
--mandir=/opt/work/builds/tools/5/share/man \
--infodir=/opt/work/builds/tools/5/share/info \
--datadir=/opt/work/builds/tools/5/share \
--build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
--target=powerpc-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
--enable-libgomp \
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/bin/powerpc-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 22:01:38 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf for host x86_64-apple-darwin18.7.0
URL:
http://www.rtems.org/
Version:
f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf.tar.bz2
sha512: 1ac97c04ee0587fa1351cad1413cc7c57ab479f935825b7a075e67641c4f24c00ad8708421f3978cc3a8cf31d6d75c70f05e7128ab217a41cf1146aef6fb71b6
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
RT_HOST="--host=x86_64-apple-darwin18.7.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Aug 26 22:01:38 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: d7f11a79bca2e79e98218cc0c41c9be8a23509b9
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf for host x86_64-apple-darwin18.7.0
URL:
http://www.rtems.org/
Version:
f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf.tar.bz2
sha512: 1ac97c04ee0587fa1351cad1413cc7c57ab479f935825b7a075e67641c4f24c00ad8708421f3978cc3a8cf31d6d75c70f05e7128ab217a41cf1146aef6fb71b6
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-f9e121688da5cb4e0b8d9c3dc5e395471dbce2cf
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
RT_HOST="--host=x86_64-apple-darwin18.7.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list