Build FreeBSD: PASSED 5/rtems-epiphany.bset on x86_64-freebsd12.0
Chris Johns
chrisj at rtems.org
Sun Feb 3 23:55:10 UTC 2019
RTEMS Source Builder - Set Builder, 5 (6eab3c9fe17d)
Host: FreeBSD-12.0-RELEASE-p2-amd64-64bit-ELF
FreeBSD hihi 12.0-RELEASE-p2 FreeBSD 12.0-RELEASE-p2 GENERIC amd64 amd64
Build Time: 0:06:00.099346
Sizes
=====
Maximum build usage: 1.253GB
Total size: 1.534GB
Installed : 225.848MB
Sources: 1.308GB
Patches: 5.727MB
Output
======
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.535MB (installed: 3.033MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.589MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
installing: autoconf-2.69-x86_64-freebsd12.0-1 -> /build/rtems/tools/5
installing: automake-1.12.6-x86_64-freebsd12.0-1 -> /build/rtems/tools/5
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.887MB total: 1.319GB (sources: 1.308GB, patches: 5.727MB, installed 5.298MB)
Build Set: Time 0:00:08.441616
Build Set: Time 0:00:13.706256
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.768MB (installed: 617.865KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.31.1.cfg
package: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1
building: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1
sizes: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1: 278.055MB (installed: 28.433MB)
cleaning: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1
reporting: tools/rtems-binutils-2.31.1.cfg -> epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-binutils-2.31.1.cfg -> epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1.xml
config: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
package: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1
building: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1
sizes: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1: 1.033GB (installed: 118.221MB)
cleaning: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1
reporting: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg -> epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg -> epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-7.8.1-1.cfg
package: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
building: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
sizes: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1: 299.829MB (installed: 11.200MB)
cleaning: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-7.8.1-1.cfg -> epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-7.8.1-1.cfg -> epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1
building: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1
sizes: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1: 257.310MB (installed: 67.390MB)
cleaning: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1.xml
installing: expat-2.1.0-x86_64-freebsd12.0-1 -> /build/rtems/tools/5
installing: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1 -> /build/rtems/tools/5
installing: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1 -> /build/rtems/tools/5
installing: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1 -> /build/rtems/tools/5
installing: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1 -> /build/rtems/tools/5
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1
cleaning: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1
cleaning: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
cleaning: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1
Build Sizes: usage: 1.253GB total: 1.534GB (sources: 1.308GB, patches: 5.727MB, installed 225.848MB)
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:49:27 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--verbose \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:49:27 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
./configure \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--verbose \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:49:55 2019
==============================================================================
Report: tools/rtems-binutils-2.31.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.31.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.31.1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1
Config: tools/rtems-binutils-2.31.1.cfg
Summary:
Binutils v2.31.1 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://sources.redhat.com/binutils
Version:
2.31.1
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.31.1.tar.bz2
sha512: b42954e6f49a0adcd2676bdd77dfb59bfc25cec8184b007521d1e2b1d5d0593b58639e3d9448d5a40fe024c3cea386a37743627d6bb16d502f52a4a32b9573bd
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.31.1"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--target=epiphany-rtems5 \
--verbose --disable-nls \
--disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/build/rtems/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:49:55 2019
==============================================================================
Report: tools/rtems-binutils-2.31.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.31.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.31.1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-binutils-2.31.1-x86_64-freebsd12.0-1
Config: tools/rtems-binutils-2.31.1.cfg
Summary:
Binutils v2.31.1 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://sources.redhat.com/binutils
Version:
2.31.1
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.31.1.tar.bz2
sha512: b42954e6f49a0adcd2676bdd77dfb59bfc25cec8184b007521d1e2b1d5d0593b58639e3d9448d5a40fe024c3cea386a37743627d6bb16d502f52a4a32b9573bd
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.31.1"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_binutils}/configure \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--target=epiphany-rtems5 \
--verbose --disable-nls \
--disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
--enable-deterministic-archives \
--enable-64-bit-bfd \
\
--disable-lto \
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/build/rtems/tools/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/5/bin/epiphany-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/share/man/man1/epiphany-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:52:51 2019
==============================================================================
Report: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1
Config: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
Summary:
GCC v7.4.0 and Newlib v3e24fbf6f for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://gcc.gnu.org/
Version:
7.4.0
Release:
1
Sources: 6
1: --rsb-file=newlib-3e24fbf6f.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/3e24fbf6f
No checksum
2: https://ftp.gnu.org/gnu/gcc/gcc-7.4.0/gcc-7.4.0.tar.xz
sha512: 8864d8e4b97c2e1a4f17422f6e68120172ebefeab97b1757734f7185ca68a6b9a89011c6833c03fa454c17b0ac35b15e1d284881e6971035948ac6100f3aa45e
3: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
4: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
Patches: 1
1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
Preparation:
build_top=$(pwd)
gcc_source="gcc-7.4.0"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-3e24fbf6f
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.16.1"
%setup source isl -q -D -n isl-0.16.1
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 6eab3c9fe17d219cd63ff078de114b427f444504, Newlib 3e24fbf6f" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/build/rtems/tools/5 \
--bindir=/build/rtems/tools/5/bin \
--exec_prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include \
--libdir=/build/rtems/tools/5/lib \
--libexecdir=/build/rtems/tools/5/libexec \
--mandir=/build/rtems/tools/5/share/man \
--infodir=/build/rtems/tools/5/share/info \
--datadir=/build/rtems/tools/5/share \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--target=epiphany-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
\
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/bin/epiphany-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:52:51 2019
==============================================================================
Report: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1
Config: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg
Summary:
GCC v7.4.0 and Newlib v3e24fbf6f for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://gcc.gnu.org/
Version:
7.4.0
Release:
1
Sources: 6
1: --rsb-file=newlib-3e24fbf6f.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/3e24fbf6f
No checksum
2: https://ftp.gnu.org/gnu/gcc/gcc-7.4.0/gcc-7.4.0.tar.xz
sha512: 8864d8e4b97c2e1a4f17422f6e68120172ebefeab97b1757734f7185ca68a6b9a89011c6833c03fa454c17b0ac35b15e1d284881e6971035948ac6100f3aa45e
3: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
4: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
Patches: 1
1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
Preparation:
build_top=$(pwd)
gcc_source="gcc-7.4.0"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-3e24fbf6f
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.16.1"
%setup source isl -q -D -n isl-0.16.1
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 6eab3c9fe17d219cd63ff078de114b427f444504, Newlib 3e24fbf6f" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
../${source_dir_gcc}/configure \
--prefix=/build/rtems/tools/5 \
--bindir=/build/rtems/tools/5/bin \
--exec_prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include \
--libdir=/build/rtems/tools/5/lib \
--libexecdir=/build/rtems/tools/5/libexec \
--mandir=/build/rtems/tools/5/share/man \
--infodir=/build/rtems/tools/5/share/info \
--datadir=/build/rtems/tools/5/share \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--target=epiphany-rtems5 \
--disable-libstdcxx-pch \
--with-gnu-as --with-gnu-ld --verbose \
--with-newlib \
--disable-nls --without-included-gettext \
--disable-win32-registry \
--enable-version-specific-runtime-libs \
--disable-lto \
--enable-newlib-io-c99-formats \
\
--enable-newlib-iconv \
--enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
--enable-threads \
--disable-plugin \
\
\
\
--enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/bin/epiphany-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:53:55 2019
==============================================================================
Report: tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-7.8.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-7.8.1-1.cfg
Summary:
GDB v7.8.1 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
7.8.1
Release:
1
Sources: 1
1: https://github.com/adapteva/epiphany-binutils-gdb/archive/f05996c7c42e6b2781946acbab153a481ce3fd0b.zip
sha256: 2b2034fd12f2fd5108205ade66400c175ede8cef8141a38ae03fc78bf2d65325
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-arange-inline.diff
sha256: d20d509942c9f9a69d191b8d8c1546e27d78768dba10b339acad708cf9997d81
2: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-cgen-inline.diff
sha256: 0ec465d3c5ae967d125409488a1d24fda90b361051adebee32b7512a4031606e
3: https://git.rtems.org/rtems-tools/plain/tools/5/gdb/patch-gdb-python-python-config.py
sha256: c06cafc9370063b6f966c68973434f9cce6227c96e22f8ea23f156126f0b33d3
Preparation:
build_top=$(pwd)
gdb_source=epiphany-binutils-gdb-f05996c7c42e6b2781946acbab153a481ce3fd0b
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--target=epiphany-rtems5 \
--verbose --disable-nls \
--disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--enable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python=/usr/local/bin/python3 \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:53:56 2019
==============================================================================
Report: tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-7.8.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-7.8.1-1.cfg
Summary:
GDB v7.8.1 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
7.8.1
Release:
1
Sources: 1
1: https://github.com/adapteva/epiphany-binutils-gdb/archive/f05996c7c42e6b2781946acbab153a481ce3fd0b.zip
sha256: 2b2034fd12f2fd5108205ade66400c175ede8cef8141a38ae03fc78bf2d65325
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-arange-inline.diff
sha256: d20d509942c9f9a69d191b8d8c1546e27d78768dba10b339acad708cf9997d81
2: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-cgen-inline.diff
sha256: 0ec465d3c5ae967d125409488a1d24fda90b361051adebee32b7512a4031606e
3: https://git.rtems.org/rtems-tools/plain/tools/5/gdb/patch-gdb-python-python-config.py
sha256: c06cafc9370063b6f966c68973434f9cce6227c96e22f8ea23f156126f0b33d3
Preparation:
build_top=$(pwd)
gdb_source=epiphany-binutils-gdb-f05996c7c42e6b2781946acbab153a481ce3fd0b
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} \
LIBS=${GDB_LIBS} \
../${source_dir_gdb}/configure \
--build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 \
--target=epiphany-rtems5 \
--verbose --disable-nls \
--disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
\
--without-included-gettext \
--disable-win32-registry \
--disable-werror \
--enable-sim \
\
--without-zlib \
--with-expat \
--with-guile=no \
--with-python=/usr/local/bin/python3 \
--prefix=/build/rtems/tools/5 --bindir=/build/rtems/tools/5/bin \
--exec-prefix=/build/rtems/tools/5 \
--includedir=/build/rtems/tools/5/include --libdir=/build/rtems/tools/5/lib \
--mandir=/build/rtems/tools/5/share/man --infodir=/build/rtems/tools/5/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:54:58 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 551ce0825375a43bd4438713d7a49633eef922b5 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
551ce0825375a43bd4438713d7a49633eef922b5
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5.tar.bz2
sha512: 524da6fbe9d9038edda953e1b928690905c2e188ea4c1f7b650fd6336923f916805e110b373856a4b1a2e951cc22558597361b41dd889aa2ad4a01ce44a7834f
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/build/rtems/tools/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT_WAF install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Feb 4 10:54:58 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 6eab3c9fe17d219cd63ff078de114b427f444504
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 551ce0825375a43bd4438713d7a49633eef922b5 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
551ce0825375a43bd4438713d7a49633eef922b5
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5.tar.bz2
sha512: 524da6fbe9d9038edda953e1b928690905c2e188ea4c1f7b650fd6336923f916805e110b373856a4b1a2e951cc22558597361b41dd889aa2ad4a01ce44a7834f
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-551ce0825375a43bd4438713d7a49633eef922b5
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/build/rtems/tools/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
SB_BUILD_ROOT_WAF=$SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT_WAF install
cd ${build_top}
More information about the build
mailing list