Build FreeBSD: FAILED 5/rtems-all on x86_64-freebsd12.0 (x86_64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1)
sebastian.huber at embedded-brains.de
sebastian.huber at embedded-brains.de
Tue Nov 5 10:53:02 UTC 2019
RTEMS Source Builder - Set Builder, 5 (5da4b5cdb082)
Host: FreeBSD-12.0-RELEASE-p2-amd64-64bit-ELF
FreeBSD Build_FreeBSD12 12.0-RELEASE-p2 FreeBSD 12.0-RELEASE-p2 GENERIC
amd64 amd64
Build Time: 1:40:03.574085
Output
======
Build Set: 5/rtems-all
Build Set: 5/rtems-aarch64.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.524GB (sources: 1.524GB, patches: 204.886KB, installed 0.000B)
Build Set: Time 0:00:04.809325
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.529GB (sources: 1.524GB, patches: 204.886KB, installed 5.285MB)
Build Set: Time 0:00:06.547277
Build Set: Time 0:00:11.360131
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.839KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
download: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz -> sources/gdb-8.3.tar.xz
building: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 253.396MB (installed: 14.760MB)
cleaning: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: aarch64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-aarch64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: aarch64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
download: https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6 -> sources/gnu-mirror-gcc-fb371a33fa6.tar.gz
download: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380 -> patches/freebsd-libgcc-sed-fix.patch
download: https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67 -> sources/newlib-6661a67.tar.gz
download: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2 -> sources/isl-0.16.1.tar.bz2
building: aarch64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building aarch64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-aarch64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building aarch64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.943MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 348.259MB total: 1.768GB (sources: 1.685GB, patches: 206.821KB, installed 84.317MB)
Build Set: Time 0:05:40.421890
Build Set: 5/rtems-arm.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 206.821KB, installed 0.000B)
Build Set: Time 0:00:04.834382
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 206.821KB, installed 5.285MB)
Build Set: Time 0:00:06.635754
Build Set: Time 0:00:11.473667
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.835KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 248.266MB (installed: 14.159MB)
cleaning: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: arm-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-arm-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: arm-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: arm-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building arm-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-arm-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building arm-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 347.658MB total: 1.767GB (sources: 1.685GB, patches: 206.821KB, installed 83.715MB)
Build Set: Time 0:05:15.748542
Build Set: 5/rtems-bfin.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 206.821KB, installed 0.000B)
Build Set: Time 0:00:04.713542
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 206.821KB, installed 5.285MB)
Build Set: Time 0:00:06.595465
Build Set: Time 0:00:11.312451
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 248.336MB (installed: 14.417MB)
cleaning: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: bfin-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-bfin-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 347.915MB total: 1.768GB (sources: 1.685GB, patches: 206.821KB, installed 83.973MB)
Build Set: Time 0:04:54.890862
Build Set: 5/rtems-epiphany.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 206.821KB, installed 0.000B)
Build Set: Time 0:00:04.718576
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 206.821KB, installed 5.285MB)
Build Set: Time 0:00:06.581225
Build Set: Time 0:00:11.303382
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.840KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: epiphany-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-epiphany-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: epiphany-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: epiphany-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building epiphany-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-epiphany-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building epiphany-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-gdb-7.8.1-1.cfg
package: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
building: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
sizes: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1: 299.780MB (installed: 11.201MB)
cleaning: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-7.8.1-1.cfg -> epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-7.8.1-1.cfg -> epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.943MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 380.537MB total: 1.764GB (sources: 1.685GB, patches: 206.821KB, installed 80.757MB)
Build Set: Time 0:04:27.483774
Build Set: 5/rtems-i386.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 206.821KB, installed 0.000B)
Build Set: Time 0:00:04.845863
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 206.821KB, installed 5.285MB)
Build Set: Time 0:00:06.565497
Build Set: Time 0:00:11.415100
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 247.038MB (installed: 12.216MB)
cleaning: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: i386-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-i386-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: i386-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: i386-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building i386-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-i386-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building i386-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 345.715MB total: 1.765GB (sources: 1.685GB, patches: 206.821KB, installed 81.773MB)
Build Set: Time 0:05:18.964654
Build Set: 5/rtems-lm32.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 206.821KB, installed 0.000B)
Build Set: Time 0:00:04.802272
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 206.821KB, installed 5.285MB)
Build Set: Time 0:00:06.563864
Build Set: Time 0:00:11.369638
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1
download: https://devel.rtems.org/raw-attachment/ticket/3030/gdb-7.9-lm32uart-2.diff -> patches/gdb-7.9-lm32uart-2.diff
building: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 244.988MB (installed: 13.185MB)
cleaning: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: lm32-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-lm32-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: lm32-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: lm32-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building lm32-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-lm32-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building lm32-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 346.684MB total: 1.766GB (sources: 1.685GB, patches: 208.782KB, installed 82.742MB)
Build Set: Time 0:05:00.847733
Build Set: 5/rtems-m68k.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 208.782KB, installed 0.000B)
Build Set: Time 0:00:05.490132
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 208.782KB, installed 5.285MB)
Build Set: Time 0:00:06.554967
Build Set: Time 0:00:12.048619
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 240.265MB (installed: 11.271MB)
cleaning: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: m68k-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-m68k-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: m68k-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: m68k-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building m68k-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-m68k-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building m68k-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 344.770MB total: 1.765GB (sources: 1.685GB, patches: 208.782KB, installed 80.828MB)
Build Set: Time 0:05:05.160588
Build Set: 5/rtems-microblaze.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 208.782KB, installed 0.000B)
Build Set: Time 0:00:04.813134
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 208.782KB, installed 5.285MB)
Build Set: Time 0:00:06.745468
Build Set: Time 0:00:11.562106
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.766MB (installed: 617.842KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 243.305MB (installed: 12.647MB)
cleaning: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: microblaze-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-microblaze-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: microblaze-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: microblaze-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building microblaze-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-microblaze-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building microblaze-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.943MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 346.146MB total: 1.766GB (sources: 1.685GB, patches: 208.782KB, installed 82.203MB)
Build Set: Time 0:04:55.561887
Build Set: 5/rtems-mips.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.686GB (sources: 1.685GB, patches: 208.782KB, installed 0.000B)
Build Set: Time 0:00:04.759027
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.691GB (sources: 1.685GB, patches: 208.782KB, installed 5.285MB)
Build Set: Time 0:00:06.630690
Build Set: Time 0:00:11.393332
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 253.327MB (installed: 14.986MB)
cleaning: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: mips-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-mips-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: mips-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: mips-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building mips-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-mips-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building mips-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
config: tools/rtems-mipstx39-gdb-8.0.1-1.cfg
package: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1
download: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz -> sources/gdb-8.0.1.tar.xz
download: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.0.1-sis-leon2-leon3.diff -> patches/gdb-8.0.1-sis-leon2-leon3.diff
download: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.0.1-sis-leon3-smp.diff -> patches/gdb-8.0.1-sis-leon3-smp.diff
building: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1
sizes: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1: 241.560MB (installed: 13.504MB)
cleaning: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1
reporting: tools/rtems-mipstx39-gdb-8.0.1-1.cfg -> mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-mipstx39-gdb-8.0.1-1.cfg -> mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
cleaning: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1
Build Sizes: usage: 361.989MB total: 1.800GB (sources: 1.704GB, patches: 541.131KB, installed 98.047MB)
Build Set: Time 0:06:36.279355
Build Set: 5/rtems-moxie.bset
config: devel/dtc-1.4.1-1.cfg
package: dtc-1.4.1-x86_64-freebsd12.0-1
building: dtc-1.4.1-x86_64-freebsd12.0-1
sizes: dtc-1.4.1-x86_64-freebsd12.0-1: 3.154MB (installed: 906.972KB)
cleaning: dtc-1.4.1-x86_64-freebsd12.0-1
reporting: devel/dtc-1.4.1-1.cfg -> dtc-1.4.1-x86_64-freebsd12.0-1.txt
reporting: devel/dtc-1.4.1-1.cfg -> dtc-1.4.1-x86_64-freebsd12.0-1.xml
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.704GB (sources: 1.704GB, patches: 541.131KB, installed 0.000B)
Build Set: Time 0:00:04.684342
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.709GB (sources: 1.704GB, patches: 541.131KB, installed 5.285MB)
Build Set: Time 0:00:06.770909
Build Set: Time 0:00:11.460688
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.837KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 243.156MB (installed: 12.639MB)
cleaning: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: dtc-1.4.1-x86_64-freebsd12.0-1
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 347.024MB total: 1.785GB (sources: 1.704GB, patches: 541.131KB, installed 83.081MB)
Build Set: Time 0:04:54.397601
Build Set: 5/rtems-nios2.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.704GB (sources: 1.704GB, patches: 541.131KB, installed 0.000B)
Build Set: Time 0:00:05.036750
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.709GB (sources: 1.704GB, patches: 541.131KB, installed 5.285MB)
Build Set: Time 0:00:06.634792
Build Set: Time 0:00:11.678917
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.837KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 239.625MB (installed: 11.198MB)
cleaning: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: nios2-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-nios2-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: nios2-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: nios2-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building nios2-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-nios2-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building nios2-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 344.697MB total: 1.783GB (sources: 1.704GB, patches: 541.131KB, installed 80.754MB)
Build Set: Time 0:04:59.880942
Build Set: 5/rtems-or1k.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.704GB (sources: 1.704GB, patches: 541.131KB, installed 0.000B)
Build Set: Time 0:00:05.011797
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.709GB (sources: 1.704GB, patches: 541.131KB, installed 5.285MB)
Build Set: Time 0:00:07.236027
Build Set: Time 0:00:12.251477
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.2.1-1.cfg
package: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
download: http://ftp.gnu.org/gnu/gdb/gdb-8.2.1.tar.xz -> sources/gdb-8.2.1.tar.xz
download: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-disable-sis.patch -> patches/gdb-8.2.1-disable-sis.patch
building: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
sizes: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1: 244.567MB (installed: 13.703MB)
cleaning: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.2.1-1.cfg -> or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.2.1-1.cfg -> or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: or1k-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-or1k-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-9.2.0-newlib-6661a67.cfg
package: or1k-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
download: https://ftp.gnu.org/gnu/gcc/gcc-9.2.0/gcc-9.2.0.tar.xz -> sources/gcc-9.2.0.tar.xz
building: or1k-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
error: building or1k-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-or1k-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building or1k-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 347.202MB total: 1.870GB (sources: 1.788GB, patches: 542.267KB, installed 83.259MB)
Build Set: Time 0:05:52.368822
Build Set: 5/rtems-powerpc.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:04.834439
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.595559
Build Set: Time 0:00:11.433592
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.839KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 270.121MB (installed: 16.501MB)
cleaning: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: powerpc-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-powerpc-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building powerpc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.943MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 356.178MB total: 1.873GB (sources: 1.788GB, patches: 542.267KB, installed 86.057MB)
Build Set: Time 0:05:14.195557
Build Set: 5/rtems-riscv.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:04.872252
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.566298
Build Set: Time 0:00:11.442111
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.837KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 241.312MB (installed: 11.402MB)
cleaning: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: riscv-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-riscv-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-9.2.0-newlib-6661a67.cfg
package: riscv-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
building: riscv-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
error: building riscv-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-riscv-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building riscv-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
config: devel/sis-2-1.cfg
package: sis-2.18-x86_64-freebsd12.0-1
download: https://git.rtems.org/sis/snapshot/sis-2.18.tar.bz2 -> sources/sis-2.18.tar.bz2
building: sis-2.18-x86_64-freebsd12.0-1
sizes: sis-2.18-x86_64-freebsd12.0-1: 2.050MB (installed: 223.140KB)
cleaning: sis-2.18-x86_64-freebsd12.0-1
reporting: devel/sis-2-1.cfg -> sis-2.18-x86_64-freebsd12.0-1.txt
reporting: devel/sis-2-1.cfg -> sis-2.18-x86_64-freebsd12.0-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
cleaning: sis-2.18-x86_64-freebsd12.0-1
Build Sizes: usage: 345.119MB total: 1.868GB (sources: 1.788GB, patches: 542.267KB, installed 81.177MB)
Build Set: Time 0:05:37.466746
Build Set: 5/rtems-sh.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:05.011684
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.537959
Build Set: Time 0:00:11.553306
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.764MB (installed: 617.834KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 247.102MB (installed: 13.681MB)
cleaning: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: sh-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-sh-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: sh-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: sh-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building sh-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-sh-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building sh-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 347.180MB total: 1.870GB (sources: 1.788GB, patches: 542.267KB, installed 83.238MB)
Build Set: Time 0:05:07.136548
Build Set: 5/rtems-sparc.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:04.909249
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.951228
Build Set: Time 0:00:11.864155
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.837KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 241.075MB (installed: 11.395MB)
cleaning: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: sparc-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-sparc-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: sparc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: sparc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building sparc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-sparc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building sparc-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
config: devel/sis-2-1.cfg
package: sis-2.18-x86_64-freebsd12.0-1
building: sis-2.18-x86_64-freebsd12.0-1
sizes: sis-2.18-x86_64-freebsd12.0-1: 2.050MB (installed: 223.140KB)
cleaning: sis-2.18-x86_64-freebsd12.0-1
reporting: devel/sis-2-1.cfg -> sis-2.18-x86_64-freebsd12.0-1.txt
reporting: devel/sis-2-1.cfg -> sis-2.18-x86_64-freebsd12.0-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
cleaning: sis-2.18-x86_64-freebsd12.0-1
Build Sizes: usage: 345.112MB total: 1.868GB (sources: 1.788GB, patches: 542.267KB, installed 81.169MB)
Build Set: Time 0:05:02.843584
Build Set: 5/rtems-sparc64.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:04.723206
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.644224
Build Set: Time 0:00:11.370909
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.839KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 241.590MB (installed: 11.451MB)
cleaning: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: sparc64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-sparc64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: sparc64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: sparc64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building sparc64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-sparc64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building sparc64-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.943MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 344.950MB total: 1.868GB (sources: 1.788GB, patches: 542.267KB, installed 81.008MB)
Build Set: Time 0:05:00.874837
Build Set: 5/rtems-v850.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:04.756281
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.671688
Build Set: Time 0:00:11.431721
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.836KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1
building: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1
sizes: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1: 254.300MB (installed: 15.584MB)
cleaning: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: v850-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-v850-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: v850-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
building: v850-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
error: building v850-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-v850-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building v850-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 349.083MB total: 1.872GB (sources: 1.788GB, patches: 542.267KB, installed 85.140MB)
Build Set: Time 0:05:08.837587
Build Set: 5/rtems-x86_64.bset
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 8.324MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 8.324MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:05.210267
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.0-1
building: autoconf-2.69-x86_64-freebsd12.0-1
sizes: autoconf-2.69-x86_64-freebsd12.0-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.0-1
building: automake-1.12.6-x86_64-freebsd12.0-1
sizes: automake-1.12.6-x86_64-freebsd12.0-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.0-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.0-1
cleaning: automake-1.12.6-x86_64-freebsd12.0-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.636461
Build Set: Time 0:00:11.850224
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.0-1
building: expat-2.1.0-x86_64-freebsd12.0-1
sizes: expat-2.1.0-x86_64-freebsd12.0-1: 4.765MB (installed: 617.838KB)
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.0-1.xml
config: tools/rtems-gdb-8.2.1-1.cfg
package: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
building: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
sizes: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1: 246.707MB (installed: 12.142MB)
cleaning: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
reporting: tools/rtems-gdb-8.2.1-1.cfg -> x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1.txt
reporting: tools/rtems-gdb-8.2.1-1.cfg -> x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: x86_64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1
warning: checksum error: binutils-2.33.1.tar.bz2
warning: removing: binutils-2.33.1.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2 -> sources/binutils-2.33.1.tar.bz2
warning: checksum error: binutils-2.33.1.tar.bz2
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
Build FAILED
See error report: rsb-report-x86_64-rtems5-binutils-2.33.1-x86_64-freebsd12.0-1.txt
error: checksum failure file: sources/binutils-2.33.1.tar.bz2
config: tools/rtems-gcc-9.2.0-newlib-6661a67.cfg
package: x86_64-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
building: x86_64-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
error: building x86_64-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
Build FAILED
See error report: rsb-report-x86_64-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1.txt
error: building x86_64-rtems5-gcc-9.2.0-newlib-6661a67-x86_64-freebsd12.0-1
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 263.942MB (installed: 68.953MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: expat-2.1.0-x86_64-freebsd12.0-1
cleaning: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 345.641MB total: 1.869GB (sources: 1.788GB, patches: 542.267KB, installed 81.699MB)
Build Set: Time 0:05:50.173824
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:23:20 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target aarch64-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:23:20 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target aarch64-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:25:02 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target aarch64-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems5" -o "x86_64-freebsd12.0" == "aarch64-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=aarch64-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:25:03 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target aarch64-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems5" -o "x86_64-freebsd12.0" == "aarch64-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=aarch64-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:28:43 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:28:43 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:29:00 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target arm-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:29:00 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target arm-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:30:34 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target arm-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "arm-rtems5" -o "x86_64-freebsd12.0" == "arm-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=arm-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:30:35 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: arm-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target arm-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "arm-rtems5" -o "x86_64-freebsd12.0" == "arm-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=arm-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:33:59 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:34:00 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:34:16 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target bfin-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:34:16 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target bfin-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:35:51 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target bfin-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "bfin-rtems5" -o "x86_64-freebsd12.0" == "bfin-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=bfin-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:35:51 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target bfin-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "bfin-rtems5" -o "x86_64-freebsd12.0" == "bfin-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=bfin-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:38:54 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:38:54 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:39:11 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:39:11 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:43:05 2019
==============================================================================
Report: tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-7.8.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-7.8.1-1.cfg
Summary:
GDB v7.8.1 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
7.8.1
Release:
1
Sources: 1
1: https://github.com/adapteva/epiphany-binutils-gdb/archive/f05996c7c42e6b2781946acbab153a481ce3fd0b.zip
sha256: 2b2034fd12f2fd5108205ade66400c175ede8cef8141a38ae03fc78bf2d65325
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-arange-inline.diff
sha256: d20d509942c9f9a69d191b8d8c1546e27d78768dba10b339acad708cf9997d81
2: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-cgen-inline.diff
sha256: 0ec465d3c5ae967d125409488a1d24fda90b361051adebee32b7512a4031606e
3: https://git.rtems.org/rtems-tools/plain/tools/5/gdb/patch-gdb-python-python-config.py
sha256: c06cafc9370063b6f966c68973434f9cce6227c96e22f8ea23f156126f0b33d3
Preparation:
build_top=$(pwd)
gdb_source=epiphany-binutils-gdb-f05996c7c42e6b2781946acbab153a481ce3fd0b
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=epiphany-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:43:05 2019
==============================================================================
Report: tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-7.8.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-7.8.1-1.cfg
------------------------------------------------------------------------------
Package: epiphany-rtems5-gdb-7.8.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-7.8.1-1.cfg
Summary:
GDB v7.8.1 for target epiphany-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
7.8.1
Release:
1
Sources: 1
1: https://github.com/adapteva/epiphany-binutils-gdb/archive/f05996c7c42e6b2781946acbab153a481ce3fd0b.zip
sha256: 2b2034fd12f2fd5108205ade66400c175ede8cef8141a38ae03fc78bf2d65325
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-arange-inline.diff
sha256: d20d509942c9f9a69d191b8d8c1546e27d78768dba10b339acad708cf9997d81
2: https://devel.rtems.org/raw-attachment/ticket/3226/gdb-sim-cgen-inline.diff
sha256: 0ec465d3c5ae967d125409488a1d24fda90b361051adebee32b7512a4031606e
3: https://git.rtems.org/rtems-tools/plain/tools/5/gdb/patch-gdb-python-python-config.py
sha256: c06cafc9370063b6f966c68973434f9cce6227c96e22f8ea23f156126f0b33d3
Preparation:
build_top=$(pwd)
gdb_source=epiphany-binutils-gdb-f05996c7c42e6b2781946acbab153a481ce3fd0b
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "epiphany-rtems5" -o "x86_64-freebsd12.0" == "epiphany-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=epiphany-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:43:22 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:43:22 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:43:39 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target i386-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:43:39 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target i386-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:45:11 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target i386-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd12.0" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=i386-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:45:12 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: i386-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target i386-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "i386-rtems5" -o "x86_64-freebsd12.0" == "i386-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=i386-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:48:42 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:48:42 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:48:57 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target lm32-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:48:57 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target lm32-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:50:33 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target lm32-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3030/gdb-7.9-lm32uart-2.diff
sha256: 7a266c1800829dcb5e493073ef98ad7d7f38a69715b93154dfaaffd34073dff3
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "lm32-rtems5" -o "x86_64-freebsd12.0" == "lm32-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=lm32-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:50:33 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: lm32-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target lm32-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3030/gdb-7.9-lm32uart-2.diff
sha256: 7a266c1800829dcb5e493073ef98ad7d7f38a69715b93154dfaaffd34073dff3
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "lm32-rtems5" -o "x86_64-freebsd12.0" == "lm32-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=lm32-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:53:42 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:53:42 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:53:59 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target m68k-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:53:59 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target m68k-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:55:32 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target m68k-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "m68k-rtems5" -o "x86_64-freebsd12.0" == "m68k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=m68k-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:55:32 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: m68k-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target m68k-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "m68k-rtems5" -o "x86_64-freebsd12.0" == "m68k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=m68k-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:58:46 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:58:46 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:59:03 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target microblaze-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 10:59:03 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target microblaze-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:00:37 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target microblaze-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems5" -o "x86_64-freebsd12.0" == "microblaze-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=microblaze-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:00:37 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target microblaze-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems5" -o "x86_64-freebsd12.0" == "microblaze-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=microblaze-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:03:43 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:03:43 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:03:59 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target mips-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:03:59 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target mips-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:05:35 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target mips-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems5" -o "x86_64-freebsd12.0" == "mips-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=mips-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:05:35 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: mips-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target mips-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems5" -o "x86_64-freebsd12.0" == "mips-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=mips-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:08:40 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:08:40 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:10:18 2019
==============================================================================
Report: tools/rtems-mipstx39-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-8.0.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1
Config: tools/rtems-mipstx39-gdb-8.0.1-1.cfg
Summary:
GDB v8.0.1 for target mipstx39-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.0.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz
sha512: 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.0.1-sis-leon2-leon3.diff
sha512: a16859b5badbce8ecbc9259553b2abe7e93b4fb8ab899e18e8ddb294a1433f49df8ddee418bb6ab55dc2402e5ad6aca6274fb9e8b53278574f269a555fdeddcf
2: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.0.1-sis-leon3-smp.diff
sha512: 1d086c656e6c240eee721f0f4a5cd43d4bbd29feff2ac22e6e56b6953c6390438976180575c0888c38a000c5ed6c8276479e9620315fdd6a6455214218ecbb78
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.0.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mipstx39-rtems5" -o "x86_64-freebsd12.0" == "mipstx39-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=mipstx39-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:10:19 2019
==============================================================================
Report: tools/rtems-mipstx39-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-8.0.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-8.0.1-1.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems5-gdb-8.0.1-x86_64-freebsd12.0-1
Config: tools/rtems-mipstx39-gdb-8.0.1-1.cfg
Summary:
GDB v8.0.1 for target mipstx39-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.0.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz
sha512: 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.0.1-sis-leon2-leon3.diff
sha512: a16859b5badbce8ecbc9259553b2abe7e93b4fb8ab899e18e8ddb294a1433f49df8ddee418bb6ab55dc2402e5ad6aca6274fb9e8b53278574f269a555fdeddcf
2: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.0.1-sis-leon3-smp.diff
sha512: 1d086c656e6c240eee721f0f4a5cd43d4bbd29feff2ac22e6e56b6953c6390438976180575c0888c38a000c5ed6c8276479e9620315fdd6a6455214218ecbb78
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.0.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mipstx39-rtems5" -o "x86_64-freebsd12.0" == "mipstx39-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=mipstx39-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:10:23 2019
==============================================================================
Report: devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.4.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.4.1-x86_64-freebsd12.0-1
Config: devel/dtc-1.4.1-1.cfg
Summary:
Device Tree Compiler v1.4.1 for target moxie-rtems5 on host x86_64-freebsd12.0
URL:
http://www.jdl.com/software/
Version:
1.4.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.4.1.tar.gz
sha256: 03e74e4ee9378be15f19eb24197dfa32070efc3c85e93269e56d7ade133e359f
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.4.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.4.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
gmake PREFIX=/usr/local/rtems/5
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.4.1
gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/usr/local/rtems/5 install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:10:23 2019
==============================================================================
Report: devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.4.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.4.1-x86_64-freebsd12.0-1
Config: devel/dtc-1.4.1-1.cfg
Summary:
Device Tree Compiler v1.4.1 for target moxie-rtems5 on host x86_64-freebsd12.0
URL:
http://www.jdl.com/software/
Version:
1.4.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.4.1.tar.gz
sha256: 03e74e4ee9378be15f19eb24197dfa32070efc3c85e93269e56d7ade133e359f
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.4.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.4.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
gmake PREFIX=/usr/local/rtems/5
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.4.1
gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/usr/local/rtems/5 install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:10:38 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target moxie-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:10:38 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target moxie-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:12:11 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target moxie-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.0" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=moxie-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:12:11 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target moxie-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.0" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=moxie-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:15:14 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:15:14 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:15:30 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target nios2-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:15:30 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target nios2-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:17:03 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target nios2-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "nios2-rtems5" -o "x86_64-freebsd12.0" == "nios2-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=nios2-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:17:03 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: nios2-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target nios2-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "nios2-rtems5" -o "x86_64-freebsd12.0" == "nios2-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=nios2-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:20:12 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:20:12 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:20:30 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target or1k-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:20:30 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target or1k-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:22:13 2019
==============================================================================
Report: tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.2.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.2.1-1.cfg
Summary:
GDB v8.2.1 for target or1k-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.2.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.2.1.tar.xz
sha512: 2aa81cfd389bb48c35d7d9f95cc10e88b4f7ad4597bdde0f8f1fd312f60f10d9fb2cc6e5a9355227d89ff328f7feb0fc411a69394560cafeb9fa75d35d896d11
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-riscv-config.patch
sha512: 193eb9ddfc79c494eb8b1e971cc230f5f01b1653ba3f85b8541b973dfcd23ead65dea7a638a6ccdb7f6fc0201f9a764bfdf3f89b2d9afba5c13a5ca97e52ce9d
2: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-disable-sis.patch
sha512: 295f915d6663b397a25692d89059cccbedf686fd6b1e0b5a7f04dff0a8e4b06614d4ffcde19a9790e122c0f43de1d561f3e0ba75c03ad215a906e8cd051c6960
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.2.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-freebsd12.0" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=or1k-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:22:13 2019
==============================================================================
Report: tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.2.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
Package: or1k-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.2.1-1.cfg
Summary:
GDB v8.2.1 for target or1k-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.2.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.2.1.tar.xz
sha512: 2aa81cfd389bb48c35d7d9f95cc10e88b4f7ad4597bdde0f8f1fd312f60f10d9fb2cc6e5a9355227d89ff328f7feb0fc411a69394560cafeb9fa75d35d896d11
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-riscv-config.patch
sha512: 193eb9ddfc79c494eb8b1e971cc230f5f01b1653ba3f85b8541b973dfcd23ead65dea7a638a6ccdb7f6fc0201f9a764bfdf3f89b2d9afba5c13a5ca97e52ce9d
2: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-disable-sis.patch
sha512: 295f915d6663b397a25692d89059cccbedf686fd6b1e0b5a7f04dff0a8e4b06614d4ffcde19a9790e122c0f43de1d561f3e0ba75c03ad215a906e8cd051c6960
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.2.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "or1k-rtems5" -o "x86_64-freebsd12.0" == "or1k-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=or1k-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:26:06 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:26:06 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:26:22 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target powerpc-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:26:22 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target powerpc-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:28:05 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target powerpc-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-freebsd12.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=powerpc-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:28:06 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target powerpc-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems5" -o "x86_64-freebsd12.0" == "powerpc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=powerpc-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:31:20 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:31:20 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:31:36 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target riscv-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:31:36 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target riscv-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:33:12 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target riscv-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems5" -o "x86_64-freebsd12.0" == "riscv-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=riscv-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:33:12 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: riscv-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target riscv-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems5" -o "x86_64-freebsd12.0" == "riscv-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=riscv-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:36:53 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:36:53 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:36:58 2019
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.18-x86_64-freebsd12.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.18 for host x86_64-freebsd12.0
Version:
2.18
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.18.tar.bz2
sha256: a6447892865f1d1e6e36ed80737d6d74ec9c6b24591cb1f6a7a6fb05857ed7a0
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.18
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.18
ac_prefix=/usr/local/rtems/5
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "riscv-rtems5" != "" ; then
SIS_PREFIX="riscv-rtems5-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
gmake -j 8 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/usr/local/rtems/5/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.18
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:36:58 2019
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.18-x86_64-freebsd12.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.18 for host x86_64-freebsd12.0
Version:
2.18
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.18.tar.bz2
sha256: a6447892865f1d1e6e36ed80737d6d74ec9c6b24591cb1f6a7a6fb05857ed7a0
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.18
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.18
ac_prefix=/usr/local/rtems/5
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "riscv-rtems5" != "" ; then
SIS_PREFIX="riscv-rtems5-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
gmake -j 8 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/usr/local/rtems/5/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.18
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:37:13 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sh-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:37:14 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sh-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:38:52 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target sh-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sh-rtems5" -o "x86_64-freebsd12.0" == "sh-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sh-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:38:52 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: sh-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target sh-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sh-rtems5" -o "x86_64-freebsd12.0" == "sh-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sh-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:42:05 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:42:05 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:42:21 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sparc-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:42:21 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sparc-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:43:57 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target sparc-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc-rtems5" -o "x86_64-freebsd12.0" == "sparc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sparc-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --disable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:43:57 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: sparc-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target sparc-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc-rtems5" -o "x86_64-freebsd12.0" == "sparc-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sparc-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --disable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:47:05 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:47:05 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:47:08 2019
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.18-x86_64-freebsd12.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.18 for host x86_64-freebsd12.0
Version:
2.18
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.18.tar.bz2
sha256: a6447892865f1d1e6e36ed80737d6d74ec9c6b24591cb1f6a7a6fb05857ed7a0
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.18
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.18
ac_prefix=/usr/local/rtems/5
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "sparc-rtems5" != "" ; then
SIS_PREFIX="sparc-rtems5-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
gmake -j 8 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/usr/local/rtems/5/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.18
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:47:08 2019
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.18-x86_64-freebsd12.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.18 for host x86_64-freebsd12.0
Version:
2.18
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.18.tar.bz2
sha256: a6447892865f1d1e6e36ed80737d6d74ec9c6b24591cb1f6a7a6fb05857ed7a0
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.18
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.18
ac_prefix=/usr/local/rtems/5
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "sparc-rtems5" != "" ; then
SIS_PREFIX="sparc-rtems5-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
gmake -j 8 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/usr/local/rtems/5/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.18
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:47:24 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sparc64-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:47:24 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sparc64-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:48:59 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target sparc64-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc64-rtems5" -o "x86_64-freebsd12.0" == "sparc64-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sparc64-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:48:59 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: sparc64-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target sparc64-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc64-rtems5" -o "x86_64-freebsd12.0" == "sparc64-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sparc64-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:52:07 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:52:07 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:52:24 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target v850-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:52:24 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target v850-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:54:00 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target v850-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "v850-rtems5" -o "x86_64-freebsd12.0" == "v850-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=v850-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:54:01 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: v850-rtems5-gdb-8.3-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target v850-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "v850-rtems5" -o "x86_64-freebsd12.0" == "v850-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=v850-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:57:16 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:57:16 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:57:33 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target x86_64-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:57:34 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target x86_64-rtems5 on host x86_64-freebsd12.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:59:05 2019
==============================================================================
Report: tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.2.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
Package: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.2.1-1.cfg
Summary:
GDB v8.2.1 for target x86_64-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.2.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.2.1.tar.xz
sha512: 2aa81cfd389bb48c35d7d9f95cc10e88b4f7ad4597bdde0f8f1fd312f60f10d9fb2cc6e5a9355227d89ff328f7feb0fc411a69394560cafeb9fa75d35d896d11
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-riscv-config.patch
sha512: 193eb9ddfc79c494eb8b1e971cc230f5f01b1653ba3f85b8541b973dfcd23ead65dea7a638a6ccdb7f6fc0201f9a764bfdf3f89b2d9afba5c13a5ca97e52ce9d
2: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-disable-sis.patch
sha512: 295f915d6663b397a25692d89059cccbedf686fd6b1e0b5a7f04dff0a8e4b06614d4ffcde19a9790e122c0f43de1d561f3e0ba75c03ad215a906e8cd051c6960
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.2.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "x86_64-rtems5" -o "x86_64-freebsd12.0" == "x86_64-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=x86_64-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 11:59:05 2019
==============================================================================
Report: tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.2.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.2.1-1.cfg
------------------------------------------------------------------------------
Package: x86_64-rtems5-gdb-8.2.1-x86_64-freebsd12.0-1
Config: tools/rtems-gdb-8.2.1-1.cfg
Summary:
GDB v8.2.1 for target x86_64-rtems5 on host x86_64-freebsd12.0
URL:
http://www.gnu.org/software/gdb/
Version:
8.2.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.2.1.tar.xz
sha512: 2aa81cfd389bb48c35d7d9f95cc10e88b4f7ad4597bdde0f8f1fd312f60f10d9fb2cc6e5a9355227d89ff328f7feb0fc411a69394560cafeb9fa75d35d896d11
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-riscv-config.patch
sha512: 193eb9ddfc79c494eb8b1e971cc230f5f01b1653ba3f85b8541b973dfcd23ead65dea7a638a6ccdb7f6fc0201f9a764bfdf3f89b2d9afba5c13a5ca97e52ce9d
2: https://devel.rtems.org/raw-attachment/ticket/3460/gdb-8.2.1-disable-sis.patch
sha512: 295f915d6663b397a25692d89059cccbedf686fd6b1e0b5a7f04dff0a8e4b06614d4ffcde19a9790e122c0f43de1d561f3e0ba75c03ad215a906e8cd051c6960
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.2.1"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "x86_64-rtems5" -o "x86_64-freebsd12.0" == "x86_64-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=x86_64-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 12:03:07 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Nov 5 12:03:07 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 5da4b5cdb082a7a6208255f9ccea25a9f667a644
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.0
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.0" != "x86_64-freebsd12.0" ; then
RT_HOST="--host=x86_64-freebsd12.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list