Build FreeBSD: PASSED 5/rtems-moxie on x86_64-freebsd12.1
sebastian.huber at embedded-brains.de
sebastian.huber at embedded-brains.de
Wed Nov 6 13:39:32 UTC 2019
RTEMS Source Builder - Set Builder, 5 (82451debbe22)
Host: FreeBSD-12.1-RELEASE-amd64-64bit-ELF
FreeBSD Build_FreeBSD12 12.1-RELEASE FreeBSD 12.1-RELEASE r354233 GENERIC
amd64 amd64
Build Time: 0:07:19.662957
Sizes
=====
Maximum build usage: 1.468GB
Total size: 2.047GB
Installed : 264.001MB
Sources: 1.788GB
Patches: 542.267KB
Output
======
Build Set: 5/rtems-moxie
config: devel/dtc-1.4.1-1.cfg
package: dtc-1.4.1-x86_64-freebsd12.1-1
building: dtc-1.4.1-x86_64-freebsd12.1-1
sizes: dtc-1.4.1-x86_64-freebsd12.1-1: 3.100MB (installed: 884.972KB)
cleaning: dtc-1.4.1-x86_64-freebsd12.1-1
reporting: devel/dtc-1.4.1-1.cfg -> dtc-1.4.1-x86_64-freebsd12.1-1.txt
reporting: devel/dtc-1.4.1-1.cfg -> dtc-1.4.1-x86_64-freebsd12.1-1.xml
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.1-1
building: autoconf-2.69-x86_64-freebsd12.1-1
sizes: autoconf-2.69-x86_64-freebsd12.1-1: 7.496MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-freebsd12.1-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.1-1
building: automake-1.12.6-x86_64-freebsd12.1-1
sizes: automake-1.12.6-x86_64-freebsd12.1-1: 8.325MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-freebsd12.1-1
cleaning: autoconf-2.69-x86_64-freebsd12.1-1
cleaning: automake-1.12.6-x86_64-freebsd12.1-1
Build Sizes: usage: 8.325MB total: 1.789GB (sources: 1.788GB, patches: 542.267KB, installed 0.000B)
Build Set: Time 0:00:04.913819
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd12.1-1
building: autoconf-2.69-x86_64-freebsd12.1-1
sizes: autoconf-2.69-x86_64-freebsd12.1-1: 10.515MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-freebsd12.1-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.1-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd12.1-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd12.1-1
building: automake-1.12.6-x86_64-freebsd12.1-1
sizes: automake-1.12.6-x86_64-freebsd12.1-1: 10.588MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-freebsd12.1-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.1-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd12.1-1.xml
cleaning: autoconf-2.69-x86_64-freebsd12.1-1
cleaning: automake-1.12.6-x86_64-freebsd12.1-1
Build Sizes: usage: 15.873MB total: 1.794GB (sources: 1.788GB, patches: 542.267KB, installed 5.285MB)
Build Set: Time 0:00:06.675857
Build Set: Time 0:00:11.595142
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd12.1-1
building: expat-2.1.0-x86_64-freebsd12.1-1
sizes: expat-2.1.0-x86_64-freebsd12.1-1: 4.775MB (installed: 620.056KB)
cleaning: expat-2.1.0-x86_64-freebsd12.1-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.1-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd12.1-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1
building: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1
sizes: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1: 243.171MB (installed: 12.584MB)
cleaning: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1
reporting: tools/rtems-gdb-8.3-1.cfg -> moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1.xml
config: tools/rtems-binutils-2.33.1.cfg
package: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1
building: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1
sizes: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1: 297.572MB (installed: 26.725MB)
cleaning: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1
reporting: tools/rtems-binutils-2.33.1.cfg -> moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1.txt
reporting: tools/rtems-binutils-2.33.1.cfg -> moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1.xml
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1
building: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1
sizes: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1: 1.210GB (installed: 159.716MB)
cleaning: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1
reporting: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg -> moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1.txt
reporting: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg -> moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
building: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
sizes: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1: 251.168MB (installed: 63.506MB)
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1.xml
cleaning: dtc-1.4.1-x86_64-freebsd12.1-1
cleaning: expat-2.1.0-x86_64-freebsd12.1-1
cleaning: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1
cleaning: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1
cleaning: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1
cleaning: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Build Sizes: usage: 1.468GB total: 2.047GB (sources: 1.788GB, patches: 542.267KB, installed 264.001MB)
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:31:36 2019
==============================================================================
Report: devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.4.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.4.1-x86_64-freebsd12.1-1
Config: devel/dtc-1.4.1-1.cfg
Summary:
Device Tree Compiler v1.4.1 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://www.jdl.com/software/
Version:
1.4.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.4.1.tar.gz
sha256: 03e74e4ee9378be15f19eb24197dfa32070efc3c85e93269e56d7ade133e359f
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.4.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.4.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
gmake PREFIX=/usr/local/rtems/5
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.4.1
gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/usr/local/rtems/5 install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:31:36 2019
==============================================================================
Report: devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.4.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.4.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.4.1-x86_64-freebsd12.1-1
Config: devel/dtc-1.4.1-1.cfg
Summary:
Device Tree Compiler v1.4.1 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://www.jdl.com/software/
Version:
1.4.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.4.1.tar.gz
sha256: 03e74e4ee9378be15f19eb24197dfa32070efc3c85e93269e56d7ade133e359f
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.4.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.4.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
gmake PREFIX=/usr/local/rtems/5
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.4.1
gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/usr/local/rtems/5 install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:31:51 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.1-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:31:51 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-freebsd12.1-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --verbose --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:33:28 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.1" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --target=moxie-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:33:28 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gdb-8.3-x86_64-freebsd12.1-1
Config: tools/rtems-gdb-8.3-1.cfg
Summary:
GDB v8.3 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://www.gnu.org/software/gdb/
Version:
8.3
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-8.3"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.1" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --target=moxie-rtems5 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/local/bin/python2 --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:33:59 2019
==============================================================================
Report: tools/rtems-binutils-2.33.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.33.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.33.1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1
Config: tools/rtems-binutils-2.33.1.cfg
Summary:
Binutils v2.33.1 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://sources.redhat.com/binutils
Version:
2.33.1
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2
sha512: bfdbb49a9002dd9bae8ab3c9347e05bd968ad97837c3e71b046eb8721c45a73db01f880dbdf0911bb37a97be37d6cc3b26d0855964a011f593ccbf1d08641c87
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.33.1"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.1" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --target=moxie-rtems5 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/usr/local/rtems/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:33:59 2019
==============================================================================
Report: tools/rtems-binutils-2.33.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.33.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.33.1.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-binutils-2.33.1-x86_64-freebsd12.1-1
Config: tools/rtems-binutils-2.33.1.cfg
Summary:
Binutils v2.33.1 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://sources.redhat.com/binutils
Version:
2.33.1
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.33.1.tar.bz2
sha512: bfdbb49a9002dd9bae8ab3c9347e05bd968ad97837c3e71b046eb8721c45a73db01f880dbdf0911bb37a97be37d6cc3b26d0855964a011f593ccbf1d08641c87
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.33.1"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.1" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --target=moxie-rtems5 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec-prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info
gmake -j 8 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/usr/local/rtems/5/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
touch $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
mkdir -p $SB_BUILD_ROOT/usr/local/rtems/5/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/usr/local/rtems/5/bin/moxie-rtems5-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/share/man/man1/moxie-rtems5-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:38:27 2019
==============================================================================
Report: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1
Config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
Summary:
GCC vfb371a33fa6 and Newlib v6661a67 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://gcc.gnu.org/
Version:
fb371a33fa6
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-fb371a33fa6.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-6661a67.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-fb371a33fa6
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-6661a67
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.16.1"
%setup source isl -q -D -n isl-0.16.1
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 82451debbe22055834e4aed78211f1002b4c197f, Newlib 6661a67" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.1" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec_prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --libexecdir=/usr/local/rtems/5/libexec --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info --datadir=/usr/local/rtems/5/share --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --target=moxie-rtems5 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/bin/moxie-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:38:27 2019
==============================================================================
Report: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
Package: moxie-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-freebsd12.1-1
Config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
Summary:
GCC vfb371a33fa6 and Newlib v6661a67 for target moxie-rtems5 on host x86_64-freebsd12.1
URL:
http://gcc.gnu.org/
Version:
fb371a33fa6
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-fb371a33fa6.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-6661a67.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
No checksum
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-fb371a33fa6
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-6661a67
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.16.1"
%setup source isl -q -D -n isl-0.16.1
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 5, RSB 82451debbe22055834e4aed78211f1002b4c197f, Newlib 6661a67" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "moxie-rtems5" -o "x86_64-freebsd12.1" == "moxie-rtems5" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.1-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.1-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/usr/local/rtems/5 --bindir=/usr/local/rtems/5/bin --exec_prefix=/usr/local/rtems/5 --includedir=/usr/local/rtems/5/include --libdir=/usr/local/rtems/5/lib --libexecdir=/usr/local/rtems/5/libexec --mandir=/usr/local/rtems/5/share/man --infodir=/usr/local/rtems/5/share/info --datadir=/usr/local/rtems/5/share --build=x86_64-freebsd12.1 --host=x86_64-freebsd12.1 --target=moxie-rtems5 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
gmake -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/usr/local/rtems/5/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/bin/moxie-rtems5-c++filt
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/usr/local/rtems/5/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:38:45 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.1
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
RT_HOST="--host=x86_64-freebsd12.1"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Nov 6 14:38:45 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
2: main: https://main.eb.localhost/gitlab/eb/101-embedded-brains/oss/rtems-source-builder.git
Status:
Clean
Head:
Commit: 82451debbe22055834e4aed78211f1002b4c197f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 12bd8f77bad4779319039fd7be33d006e10f5618 for host x86_64-freebsd12.1
URL:
http://www.rtems.org/
Version:
12bd8f77bad4779319039fd7be33d006e10f5618
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618.tar.bz2
sha512: d720966bee1cd7f4484cadfbc8bad2ac0d74e07912df0b66f900a959e652d18080157e31c957ca0c9a4f0d8bec99dcc0b7c06e61a62b955ef230d9630f6fe111
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-12bd8f77bad4779319039fd7be33d006e10f5618
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.1" != "x86_64-freebsd12.1" ; then
RT_HOST="--host=x86_64-freebsd12.1"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/usr/local/rtems/5
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list