Build Linux: FAILED devel/qemu on x86_64-linux-gnu (glib-2.39.3-x86_64-linux-gnu-1)
joel at rtems.org
joel at rtems.org
Fri Nov 15 11:00:12 UTC 2019
RTEMS Source Builder - Set Builder, 5 (0e41f9dd88ce)
Host: Linux-4.15.0-66-generic-x86_64-with-Ubuntu-18.04-bionic
Linux rtbf64a 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC
2019 x86_64 x86_64
Build Time: 0:05:22.317718
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: glib-2.39.3-x86_64-linux-gnu-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
checking for struct stat.st_atimensec... no
checking for struct stat.st_atim.tv_nsec... yes
checking for struct stat.st_ctimensec... no
checking for struct stat.st_ctim.tv_nsec... yes
checking for struct stat.st_blksize... yes
checking for struct stat.st_blocks... yes
checking for struct statfs.f_fstypename... no
checking for struct statfs.f_bavail... yes
checking for struct statvfs.f_basetype... no
checking for struct statvfs.f_fstypename... no
checking for struct tm.tm_gmtoff... yes
checking for struct tm.__tm_gmtoff... no
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for struct dirent.d_type... yes
checking for nl_langinfo and CODESET... yes
checking whether we are using the GNU C Library 2.1 or newer... yes
checking size of size_t... 8
checking for the appropriate definition for size_t... unsigned long
checking size of ssize_t... 8
checking for the appropriate definition for ssize_t... long
checking for lstat... yes
checking for strsignal... yes
checking for vsnprintf... yes
checking for stpcpy... yes
checking for strcasecmp... yes
checking for strncasecmp... yes
checking for poll... yes
checking for vasprintf... yes
checking for setenv... yes
checking for unsetenv... yes
checking for getc_unlocked... yes
checking for readlink... yes
checking for symlink... yes
checking for fdwalk... no
checking for memmem... yes
checking for lchmod... no
checking for lchown... yes
checking for fchmod... yes
checking for fchown... yes
checking for utimes... yes
checking for getresuid... yes
checking for getmntent_r... yes
checking for setmntent... yes
checking for endmntent... yes
checking for hasmntopt... yes
checking for getfsstat... no
checking for getvfsstat... no
checking for fallocate... yes
checking for splice... yes
checking for prlimit... yes
checking for statvfs... yes
checking for statfs... yes
checking whether to use statfs or statvfs... statfs
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for newlocale... yes
checking for uselocale... yes
checking for strtod_l... yes
checking for strtoll_l... yes
checking for strtoull_l... yes
checking value of AF_INET... 2
checking value of AF_INET6... 10
checking value of AF_UNIX... 1
checking value of MSG_PEEK... 2
checking value of MSG_OOB... 1
checking value of MSG_DONTROUTE... 4
checking for getprotobyname_r... yes
checking for endservent... yes
checking for if_nametoindex... yes
checking for if_indextoname... yes
checking if arpa/nameser_compat.h is needed... no
checking for res_query... in -lresolv
checking for socket... yes
checking for res_init... yes
checking for linux/netlink.h... yes
checking for struct ip_mreqn... yes
checking number of arguments to statfs()... 2
checking open() option O_DIRECTORY... yes
checking for C99 vsnprintf... yes
checking whether printf supports positional parameters... yes
checking for signed... yes
checking for long long... yes
checking for long double... yes
checking for wchar_t... yes
checking for wint_t... yes
checking for size_t... (cached) yes
checking for ptrdiff_t... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for snprintf... yes
checking for wcslen... yes
checking for C99 snprintf... yes
checking for fd_set... yes, found in sys/types.h
checking for nl_langinfo (CODESET)... yes
checking for nl_langinfo (PM_STR)... yes
checking for nl_langinfo (_NL_CTYPE_OUTDIGITn_MB)... yes
checking for a compliant posix_memalign() implementation... yes
checking for OpenBSD strlcpy/strlcat... no
checking for an implementation of va_copy()... yes
checking for an implementation of __va_copy()... yes
checking whether va_lists can be copied by value... no
checking for dlopen... no
checking for NSLinkModule... no
checking for dlopen in -ldl... yes
checking for dlsym in -ldl... yes
checking for RTLD_GLOBAL brokenness... no
checking for preceeding underscore in symbols... no
checking for dlerror... yes
checking for the suffix of module shared libraries... .so
checking for gspawn implementation... gspawn.lo
checking for GIOChannel implementation... giounix.lo
checking for is_selinux_enabled in -lselinux... no
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for inotify_init1... yes
checking sys/event.h usability... no
checking sys/event.h presence... no
checking for sys/event.h... no
checking for FAMOpen in -lfam... no
configure: WARNING: *** FAM support will not be built (FAM library not found) ***
checking for getxattr in -lc... yes
checking sys/xattr.h usability... yes
checking sys/xattr.h presence... yes
checking for sys/xattr.h... yes
checking for XATTR_NOFOLLOW... no
checking for LIBELF... no
checking for elf_begin in -lelf... no
checking for elf_getshdrstrndx in -lelf... no
checking for elf_getshdrnum in -lelf... no
checking libelf.h usability... no
checking libelf.h presence... no
checking for libelf.h... no
checking for platform-dependent source...
checking whether to compile timeloop... yes
checking if building for some Win32 platform... no
checking for thread implementation... posix
checking thread related cflags... -pthread
checking thread related libraries... -pthread
checking for localtime_r... yes
checking for gmtime_r... (cached) yes
checking for posix getpwuid_r... yes
checking for posix getgrgid_r... yes
checking for pthread_attr_setstacksize... yes
checking for pthread_condattr_setclock... yes
checking for pthread_cond_timedwait_monotonic... no
checking for pthread_cond_timedwait_monotonic_np... no
checking for clock_gettime... yes
checking for lock-free atomic intrinsics... yes
checking for futex(2) system call... yes
checking for eventfd(2) system call... yes
checking value of POLLIN... 1
checking value of POLLOUT... 4
checking value of POLLPRI... 2
checking value of POLLERR... 8
checking value of POLLHUP... 16
checking value of POLLNVAL... 32
checking for broken poll... no
checking whether compiler understands -Wno-pointer-sign... yes
checking for EILSEQ... yes
checking for gtkdoc-check... no
checking for gtkdoc-rebase... no
checking for gtkdoc-mkpdf... no
checking whether to build gtk-doc documentation... no
checking for xsltproc... /usr/bin/xsltproc
checking for XML catalog (/etc/xml/catalog)... found
checking for xmlcatalog... /usr/bin/xmlcatalog
checking for DocBook XML DTD V4.1.2 in XML catalog... found
checking for DocBook XSL Stylesheets in XML catalog... found
checking whether to generate man pages... yes
checking whether to include dtrace tracing support... no
checking whether to include systemtap tracing support... no
checking for guint32... yes
checking alignment of guint32... 4
checking for guint64... yes
checking alignment of guint64... 8
checking for unsigned long... yes
checking alignment of unsigned long... 8
checking for DBUS1... no
checking for dbus-daemon... dbus-daemon
checking for -Bsymbolic-functions linker flag... yes
checking for -fvisibility=hidden compiler flag... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Wall in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Wstrict-prototypes in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=declaration-after-statement in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=missing-prototypes in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=implicit-function-declaration in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=pointer-arith in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=init-self in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=format-security in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=format=2 in envvar CFLAGS... yes
checking if gcc -O2 -g -pipe -I/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/include supports flag -Werror=missing-include-dirs in envvar CFLAGS... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating glib-2.0.pc
config.status: creating gmodule-2.0.pc
config.status: creating gmodule-export-2.0.pc
config.status: creating gmodule-no-export-2.0.pc
config.status: creating gthread-2.0.pc
config.status: creating gobject-2.0.pc
config.status: creating gio-2.0.pc
config.status: creating gio-unix-2.0.pc
config.status: creating gio-windows-2.0.pc
config.status: creating glib-zip
config.status: creating glib-gettextize
config.status: creating Makefile
config.status: creating build/Makefile
config.status: creating build/win32/Makefile
config.status: creating build/win32/dirent/Makefile
config.status: creating build/win32/vs9/Makefile
config.status: creating build/win32/vs10/Makefile
config.status: creating build/win32/vs11/Makefile
config.status: creating glib/Makefile
config.status: creating glib/glib.stp
config.status: creating glib/libcharset/Makefile
config.status: creating glib/gnulib/Makefile
config.status: creating glib/pcre/Makefile
config.status: creating glib/update-pcre/Makefile
config.status: creating glib/tests/Makefile
config.status: creating gmodule/Makefile
config.status: creating gmodule/gmoduleconf.h
config.status: creating gobject/Makefile
config.status: creating gobject/gobject.stp
config.status: creating gobject/glib-mkenums
config.status: creating gobject/tests/Makefile
config.status: creating gthread/Makefile
config.status: creating gio/Makefile
config.status: creating gio/gdbus-2.0/codegen/Makefile
config.status: creating gio/gdbus-2.0/codegen/config.py
config.status: creating gio/gnetworking.h
config.status: creating gio/xdgmime/Makefile
config.status: creating gio/inotify/Makefile
config.status: creating gio/kqueue/Makefile
config.status: creating gio/fen/Makefile
config.status: creating gio/fam/Makefile
config.status: creating gio/win32/Makefile
config.status: creating gio/tests/Makefile
config.status: creating gio/tests/gdbus-object-manager-example/Makefile
config.status: creating gio/tests/services/Makefile
config.status: creating gio/tests/services/org.gtk.GDBus.Examples.ObjectManager.service
config.status: creating gio/tests/modules/Makefile
config.status: creating po/Makefile.in
config.status: creating docs/Makefile
config.status: creating docs/reference/Makefile
config.status: creating docs/reference/glib/Makefile
config.status: creating docs/reference/glib/version.xml
config.status: creating docs/reference/gobject/Makefile
config.status: creating docs/reference/gobject/version.xml
config.status: creating docs/reference/gio/Makefile
config.status: creating docs/reference/gio/gdbus-object-manager-example/Makefile
config.status: creating docs/reference/gio/version.xml
config.status: creating tests/Makefile
config.status: creating tests/gobject/Makefile
config.status: creating tests/refcount/Makefile
config.status: creating m4macros/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: executing libtool commands
config.status: executing glib/glibconfig.h commands
config.status: executing chmod-scripts commands
+ LD_LIBRARY_PATH=/home/joel/rtems-cron-5/rtems-source-builder/bare/build/tmp/sb-joel/devel/qemu/home/joel/rtems-cron-5/tools/5/lib make -j 4 all
make all-recursive
make[1]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build'
Making all in .
make[2]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build'
make[2]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build'
Making all in m4macros
make[2]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/m4macros'
make all-am
make[3]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/m4macros'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/m4macros'
make[2]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/m4macros'
Making all in glib
make[2]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib'
GEN glibconfig-stamp
config.status: executing glib/glibconfig.h commands
config.status: glib/glibconfig.h is unchanged
make all-recursive
make[3]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib'
Making all in libcharset
make[4]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/libcharset'
make all-am
make[5]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/libcharset'
CC libcharset_la-localcharset.lo
GEN ref-add.sed
GEN ref-del.sed
GEN charset.alias
CCLD libcharset.la
x86_64-linux-gnu-ar: `u' modifier ignored since `D' is the default (see `U')
make[5]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/libcharset'
make[4]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/libcharset'
Making all in pcre
make[4]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/pcre'
make all-am
make[5]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/pcre'
CC libpcre_la-pcre_byte_order.lo
CC libpcre_la-pcre_chartables.lo
CC libpcre_la-pcre_compile.lo
CC libpcre_la-pcre_config.lo
CC libpcre_la-pcre_dfa_exec.lo
CC libpcre_la-pcre_exec.lo
CC libpcre_la-pcre_fullinfo.lo
CC libpcre_la-pcre_get.lo
CC libpcre_la-pcre_globals.lo
CC libpcre_la-pcre_jit_compile.lo
CC libpcre_la-pcre_newline.lo
CC libpcre_la-pcre_ord2utf8.lo
CC libpcre_la-pcre_string_utils.lo
CC libpcre_la-pcre_study.lo
CC libpcre_la-pcre_tables.lo
CC libpcre_la-pcre_valid_utf8.lo
CC libpcre_la-pcre_xclass.lo
CCLD libpcre.la
x86_64-linux-gnu-ar: `u' modifier ignored since `D' is the default (see `U')
make[5]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/pcre'
make[4]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/pcre'
Making all in update-pcre
make[4]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/update-pcre'
make all-am
make[5]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/update-pcre'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/update-pcre'
make[4]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib/update-pcre'
Making all in .
make[4]: Entering directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib'
CC libglib_2_0_la-gallocator.lo
CC libglib_2_0_la-gcache.lo
CC libglib_2_0_la-gcompletion.lo
CC libglib_2_0_la-grel.lo
CC libglib_2_0_la-gthread-deprecated.lo
CC libglib_2_0_la-garray.lo
CC libglib_2_0_la-gasyncqueue.lo
CC libglib_2_0_la-gatomic.lo
CC libglib_2_0_la-gbacktrace.lo
CC libglib_2_0_la-gbase64.lo
CC libglib_2_0_la-gbitlock.lo
../../glib-2.39.3/glib/gbacktrace.c: In function 'g_on_error_query':
../../glib-2.39.3/glib/gbacktrace.c:174:5: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result [-Wunused-result]
fgets (buf, 8, stdin);
^~~~~~~~~~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c: In function 'stack_trace':
../../glib-2.39.3/glib/gbacktrace.c:302:18: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result]
close (0); dup (in_fd[0]); /* set the stdin to the in pipe */
^~~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c:303:18: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result]
close (1); dup (out_fd[1]); /* set the stdout to the out pipe */
^~~~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c:304:18: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result]
close (2); dup (out_fd[1]); /* set the stderr to the out pipe */
^~~~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c:309:18: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result]
close (2); dup (old_err);
^~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c:322:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
write (in_fd[1], "backtrace\n", 10);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c:323:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
write (in_fd[1], "p x = 0\n", 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../glib-2.39.3/glib/gbacktrace.c:324:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
write (in_fd[1], "quit\n", 5);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC libglib_2_0_la-gbookmarkfile.lo
CC libglib_2_0_la-gbytes.lo
CC libglib_2_0_la-gcharset.lo
CC libglib_2_0_la-gchecksum.lo
CC libglib_2_0_la-gconvert.lo
CC libglib_2_0_la-gdataset.lo
CC libglib_2_0_la-gdate.lo
CC libglib_2_0_la-gdatetime.lo
../../glib-2.39.3/glib/gdate.c: In function 'g_date_strftime':
../../glib-2.39.3/glib/gdate.c:2497:7: error: format not a string literal, format string not checked [-Werror=format-nonliteral]
tmplen = strftime (tmpbuf, tmpbufsize, locale_format, &tm);
^~~~~~
CC libglib_2_0_la-gdir.lo
CC libglib_2_0_la-genviron.lo
cc1: some warnings being treated as errors
Makefile:1782: recipe for target 'libglib_2_0_la-gdate.lo' failed
make[4]: *** [libglib_2_0_la-gdate.lo] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib'
Makefile:2441: recipe for target 'all-recursive' failed
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib'
Makefile:1161: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build/glib'
Makefile:1200: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/build'
Makefile:841: recipe for target 'all' failed
make: *** [all] Error 2
shell cmd failed: /bin/sh -ex /home/joel/rtems-cron-5/rtems-source-builder/bare/build/glib-2.39.3-x86_64-linux-gnu-1/do-build
error: building glib-2.39.3-x86_64-linux-gnu-1
See error report: rsb-report-glib-2.39.3-x86_64-linux-gnu-1.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output
======
Build Set: devel/qemu
Build Set: devel/autotools-internal.bset
config: devel/autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.497MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-linux-gnu-1
config: devel/automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.087MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-linux-gnu-1
config: devel/libtool-2.4.2-1.cfg
package: libtool-2.4.2-x86_64-linux-gnu-1
building: libtool-2.4.2-x86_64-linux-gnu-1
sizes: libtool-2.4.2-x86_64-linux-gnu-1: 12.729MB (installed: 0.000B)
cleaning: libtool-2.4.2-x86_64-linux-gnu-1
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
cleaning: libtool-2.4.2-x86_64-linux-gnu-1
Build Sizes: usage: 12.729MB total: 31.734MB (sources: 31.714MB, patches: 20.646KB, installed 0.000B)
Build Set: Time 0:00:22.630111
config: devel/libiconv-1.14-1.cfg
config: devel/gettext-0.18.3.1-1.cfg
package: gettext-0.18.3.1-x86_64-linux-gnu-1
building: gettext-0.18.3.1-x86_64-linux-gnu-1
sizes: gettext-0.18.3.1-x86_64-linux-gnu-1: 165.022MB (installed: 20.889MB)
cleaning: gettext-0.18.3.1-x86_64-linux-gnu-1
reporting: devel/gettext-0.18.3.1-1.cfg -> gettext-0.18.3.1-x86_64-linux-gnu-1.txt
reporting: devel/gettext-0.18.3.1-1.cfg -> gettext-0.18.3.1-x86_64-linux-gnu-1.xml
config: devel/libffi-3.0.13-1.cfg
package: libffi-3.0.13-x86_64-linux-gnu-1
building: libffi-3.0.13-x86_64-linux-gnu-1
sizes: libffi-3.0.13-x86_64-linux-gnu-1: 5.827MB (installed: 476.969KB)
cleaning: libffi-3.0.13-x86_64-linux-gnu-1
reporting: devel/libffi-3.0.13-1.cfg -> libffi-3.0.13-x86_64-linux-gnu-1.txt
reporting: devel/libffi-3.0.13-1.cfg -> libffi-3.0.13-x86_64-linux-gnu-1.xml
config: devel/pixman-0.32.4-1.cfg
package: pixman-0.32.4-x86_64-linux-gnu-1
building: pixman-0.32.4-x86_64-linux-gnu-1
sizes: pixman-0.32.4-x86_64-linux-gnu-1: 58.982MB (installed: 13.814MB)
cleaning: pixman-0.32.4-x86_64-linux-gnu-1
reporting: devel/pixman-0.32.4-1.cfg -> pixman-0.32.4-x86_64-linux-gnu-1.txt
reporting: devel/pixman-0.32.4-1.cfg -> pixman-0.32.4-x86_64-linux-gnu-1.xml
config: devel/glib-2.39.3-1.cfg
package: glib-2.39.3-x86_64-linux-gnu-1
building: glib-2.39.3-x86_64-linux-gnu-1
error: building glib-2.39.3-x86_64-linux-gnu-1
Build FAILED
See error report: rsb-report-glib-2.39.3-x86_64-linux-gnu-1.txt
error: building glib-2.39.3-x86_64-linux-gnu-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 15 04:58:34 2019
==============================================================================
Report: devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 0e41f9dd88ce1d11ced4b157a2c330d9dc5a4bcc
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gettext-0.18.3.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
Package: gettext-0.18.3.1-x86_64-linux-gnu-1
Config: devel/gettext-0.18.3.1-1.cfg
Summary:
GetText offers to programmers, translators, and even users, a well
integrated set of tools and documentation.
URL:
http://www.gnu.org/software/gettext/
Version:
0.18.3.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/pub/gnu/gettext/gettext-0.18.3.1.tar.gz
sha256: 0d8f9a33531b77776b3dc473e7940019ca19bfca5b4c06db6e96065eeb07245d
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_gettext="gettext-0.18.3.1"
%setup source gettext -q -n gettext-0.18.3.1
%setup patch gettext -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gettext}/configure --prefix=/home/joel/rtems-cron-5/tools/5 --bindir=/home/joel/rtems-cron-5/tools/5/bin --exec_prefix=/home/joel/rtems-cron-5/tools/5 --includedir=/home/joel/rtems-cron-5/tools/5/include --libdir=/home/joel/rtems-cron-5/tools/5/lib --libexecdir=/home/joel/rtems-cron-5/tools/5/libexec --mandir=/home/joel/rtems-cron-5/tools/5/share/man --infodir=/home/joel/rtems-cron-5/tools/5/share/info --datadir=/home/joel/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 15 04:58:34 2019
==============================================================================
Report: devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 0e41f9dd88ce1d11ced4b157a2c330d9dc5a4bcc
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gettext-0.18.3.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
Package: gettext-0.18.3.1-x86_64-linux-gnu-1
Config: devel/gettext-0.18.3.1-1.cfg
Summary:
GetText offers to programmers, translators, and even users, a well
integrated set of tools and documentation.
URL:
http://www.gnu.org/software/gettext/
Version:
0.18.3.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/pub/gnu/gettext/gettext-0.18.3.1.tar.gz
sha256: 0d8f9a33531b77776b3dc473e7940019ca19bfca5b4c06db6e96065eeb07245d
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_gettext="gettext-0.18.3.1"
%setup source gettext -q -n gettext-0.18.3.1
%setup patch gettext -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gettext}/configure --prefix=/home/joel/rtems-cron-5/tools/5 --bindir=/home/joel/rtems-cron-5/tools/5/bin --exec_prefix=/home/joel/rtems-cron-5/tools/5 --includedir=/home/joel/rtems-cron-5/tools/5/include --libdir=/home/joel/rtems-cron-5/tools/5/lib --libexecdir=/home/joel/rtems-cron-5/tools/5/libexec --mandir=/home/joel/rtems-cron-5/tools/5/share/man --infodir=/home/joel/rtems-cron-5/tools/5/share/info --datadir=/home/joel/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 15 04:58:44 2019
==============================================================================
Report: devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 0e41f9dd88ce1d11ced4b157a2c330d9dc5a4bcc
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libffi-3.0.13-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
Package: libffi-3.0.13-x86_64-linux-gnu-1
Config: devel/libffi-3.0.13-1.cfg
Summary:
LibFFI provides a portable, high level programming interface to
various calling conventions.
URL:
https://sourceware.org/libffi/
Version:
3.0.13
Release:
1
Sources: 1
1: https://sourceware.org/pub/libffi/libffi-3.0.13.tar.gz
sha256: 1dddde1400c3bcb7749d398071af88c3e4754058d2d4c0b3696c2f82dc5cf11c
Patches: 1
1: http://git.rtems.org/rtems-tools/plain/tools//libffi/libffi-pkg-config-lib64-fix.diff
sha256: f858658b7b57db13002987b7d6bb0293f181519032bf4dd36969ccb79d6b16a3
Preparation:
build_top=$(pwd)
source_dir_libffi="libffi-3.0.13"
%setup source libffi -q -n libffi-3.0.13
%setup patch libffi -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_libffi}/configure --prefix=/home/joel/rtems-cron-5/tools/5 --bindir=/home/joel/rtems-cron-5/tools/5/bin --exec_prefix=/home/joel/rtems-cron-5/tools/5 --includedir=/home/joel/rtems-cron-5/tools/5/include --libdir=/home/joel/rtems-cron-5/tools/5/lib --libexecdir=/home/joel/rtems-cron-5/tools/5/libexec --mandir=/home/joel/rtems-cron-5/tools/5/share/man --infodir=/home/joel/rtems-cron-5/tools/5/share/info --datadir=/home/joel/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 15 04:58:44 2019
==============================================================================
Report: devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 0e41f9dd88ce1d11ced4b157a2c330d9dc5a4bcc
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libffi-3.0.13-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
Package: libffi-3.0.13-x86_64-linux-gnu-1
Config: devel/libffi-3.0.13-1.cfg
Summary:
LibFFI provides a portable, high level programming interface to
various calling conventions.
URL:
https://sourceware.org/libffi/
Version:
3.0.13
Release:
1
Sources: 1
1: https://sourceware.org/pub/libffi/libffi-3.0.13.tar.gz
sha256: 1dddde1400c3bcb7749d398071af88c3e4754058d2d4c0b3696c2f82dc5cf11c
Patches: 1
1: http://git.rtems.org/rtems-tools/plain/tools//libffi/libffi-pkg-config-lib64-fix.diff
sha256: f858658b7b57db13002987b7d6bb0293f181519032bf4dd36969ccb79d6b16a3
Preparation:
build_top=$(pwd)
source_dir_libffi="libffi-3.0.13"
%setup source libffi -q -n libffi-3.0.13
%setup patch libffi -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_libffi}/configure --prefix=/home/joel/rtems-cron-5/tools/5 --bindir=/home/joel/rtems-cron-5/tools/5/bin --exec_prefix=/home/joel/rtems-cron-5/tools/5 --includedir=/home/joel/rtems-cron-5/tools/5/include --libdir=/home/joel/rtems-cron-5/tools/5/lib --libexecdir=/home/joel/rtems-cron-5/tools/5/libexec --mandir=/home/joel/rtems-cron-5/tools/5/share/man --infodir=/home/joel/rtems-cron-5/tools/5/share/info --datadir=/home/joel/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 15 04:59:28 2019
==============================================================================
Report: devel/pixman-0.32.4-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 0e41f9dd88ce1d11ced4b157a2c330d9dc5a4bcc
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/pixman-0.32.4-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/pixman-0.32.4-1.cfg
------------------------------------------------------------------------------
Package: pixman-0.32.4-x86_64-linux-gnu-1
Config: devel/pixman-0.32.4-1.cfg
Summary:
Pixman is a low-level software library for pixel manipulation,
providing features such as image compositing and trapezoid
rasterization.
URL:
http://www.pixman.org/
Version:
0.32.4
Release:
1
Sources: 1
1: http://cairographics.org/releases/pixman-0.32.4.tar.gz
sha256: 80c7ed420e8a3ae749800241e6347c3d55681296cab71384be7969cd9e657e84
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_pixman="pixman-0.32.4"
%setup source pixman -q -n pixman-0.32.4
%setup patch pixman -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_pixman}/configure --prefix=/home/joel/rtems-cron-5/tools/5 --bindir=/home/joel/rtems-cron-5/tools/5/bin --exec_prefix=/home/joel/rtems-cron-5/tools/5 --includedir=/home/joel/rtems-cron-5/tools/5/include --libdir=/home/joel/rtems-cron-5/tools/5/lib --libexecdir=/home/joel/rtems-cron-5/tools/5/libexec --mandir=/home/joel/rtems-cron-5/tools/5/share/man --infodir=/home/joel/rtems-cron-5/tools/5/share/info --datadir=/home/joel/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --disable-gtk --disable-libpng
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Nov 15 04:59:28 2019
==============================================================================
Report: devel/pixman-0.32.4-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 0e41f9dd88ce1d11ced4b157a2c330d9dc5a4bcc
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/pixman-0.32.4-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/pixman-0.32.4-1.cfg
------------------------------------------------------------------------------
Package: pixman-0.32.4-x86_64-linux-gnu-1
Config: devel/pixman-0.32.4-1.cfg
Summary:
Pixman is a low-level software library for pixel manipulation,
providing features such as image compositing and trapezoid
rasterization.
URL:
http://www.pixman.org/
Version:
0.32.4
Release:
1
Sources: 1
1: http://cairographics.org/releases/pixman-0.32.4.tar.gz
sha256: 80c7ed420e8a3ae749800241e6347c3d55681296cab71384be7969cd9e657e84
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_pixman="pixman-0.32.4"
%setup source pixman -q -n pixman-0.32.4
%setup patch pixman -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_pixman}/configure --prefix=/home/joel/rtems-cron-5/tools/5 --bindir=/home/joel/rtems-cron-5/tools/5/bin --exec_prefix=/home/joel/rtems-cron-5/tools/5 --includedir=/home/joel/rtems-cron-5/tools/5/include --libdir=/home/joel/rtems-cron-5/tools/5/lib --libexecdir=/home/joel/rtems-cron-5/tools/5/libexec --mandir=/home/joel/rtems-cron-5/tools/5/share/man --infodir=/home/joel/rtems-cron-5/tools/5/share/info --datadir=/home/joel/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --disable-gtk --disable-libpng
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list