Build Darwin: PASSED 5/rtems-bfin on x86_64-apple-darwin18.7.0

chrisj at rtems.org chrisj at rtems.org
Fri Sep 6 02:33:46 UTC 2019


RTEMS Source Builder - Set Builder, 5 (d8b2719ae6f7)

Host: Darwin-18.7.0-x86_64-i386-64bit
       Darwin mohua 18.7.0 Darwin Kernel Version 18.7.0: Tue Aug 20 16:57:14 PDT
       2019; root:xnu-4903.271.2~2/RELEASE_X86_64 x86_64 i386

Build Time: 0:22:17.904947

Sizes
=====

Maximum build usage: 1.424GB
Total size: 518.174MB
Installed : 174.053MB
Sources: 343.770MB
Patches: 359.971KB

Output
======

Build Set: 5/rtems-bfin
Build Set: 5/rtems-autotools.bset
Build Set: 5/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin18.7.0-1
building: autoconf-2.69-x86_64-apple-darwin18.7.0-1
sizes: autoconf-2.69-x86_64-apple-darwin18.7.0-1: 7.509MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-apple-darwin18.7.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin18.7.0-1
building: automake-1.12.6-x86_64-apple-darwin18.7.0-1
sizes: automake-1.12.6-x86_64-apple-darwin18.7.0-1: 8.083MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-apple-darwin18.7.0-1
cleaning: autoconf-2.69-x86_64-apple-darwin18.7.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin18.7.0-1
Build Sizes: usage: 8.083MB total: 344.121MB (sources: 343.770MB, patches: 359.971KB, installed 0.000B)
Build Set: Time 0:00:11.883363
Build Set: 5/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin18.7.0-1
building: autoconf-2.69-x86_64-apple-darwin18.7.0-1
sizes: autoconf-2.69-x86_64-apple-darwin18.7.0-1: 10.540MB (installed: 3.034MB)
cleaning: autoconf-2.69-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin18.7.0-1
building: automake-1.12.6-x86_64-apple-darwin18.7.0-1
sizes: automake-1.12.6-x86_64-apple-darwin18.7.0-1: 10.346MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin18.7.0-1.xml
staging: autoconf-2.69-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris-staging
staging: automake-1.12.6-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-chris-staging
cleaning: autoconf-2.69-x86_64-apple-darwin18.7.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin18.7.0-1
Build Sizes: usage: 15.839MB total: 349.419MB (sources: 343.770MB, patches: 359.971KB, installed 5.298MB)
Build Set: Time 0:00:15.616622
Build Set: Time 0:00:27.503768
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-apple-darwin18.7.0-1
building: expat-2.1.0-x86_64-apple-darwin18.7.0-1
sizes: expat-2.1.0-x86_64-apple-darwin18.7.0-1: 5.752MB (installed: 776.294KB)
cleaning: expat-2.1.0-x86_64-apple-darwin18.7.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin18.7.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-gdb-8.3-1.cfg
package: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
building: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
sizes: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1: 413.031MB (installed: 23.030MB)
cleaning: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-gdb-8.3-1.cfg -> bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-gdb-8.3-1.cfg -> bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-binutils-2.32.cfg
package: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
building: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
sizes: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1: 313.287MB (installed: 30.116MB)
cleaning: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-binutils-2.32.cfg -> bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-binutils-2.32.cfg -> bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
package: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
building: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
sizes: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1: 1.254GB (installed: 111.429MB)
cleaning: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
reporting: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg -> bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1.txt
reporting: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg -> bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1
building: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1
sizes: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1: 107.797MB (installed: 8.720MB)
cleaning: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1.xml
installing: expat-2.1.0-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1 -> /opt/work/builds/tools/5
installing: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1 -> /opt/work/builds/tools/5
cleaning: expat-2.1.0-x86_64-apple-darwin18.7.0-1
cleaning: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
cleaning: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
cleaning: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
cleaning: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1
Build Sizes: usage: 1.424GB total: 518.174MB (sources: 343.770MB, patches: 359.971KB, installed 174.053MB)
installing: 5/rtems-bfin -> /opt/work/builds/tools/5
clean staging: 5/rtems-bfin
Staging Size: 5.305MB
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:12:09 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin18.7.0-1
 Config: devel/expat-2.1.0-1.cfg
 Summary:
  Expat XML Parser v2.1.0 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://expat.sourceforge.net/
 Version:
  2.1.0
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
       sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.1.0
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --verbose \
  --prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
  --exec-prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
  --mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
  make -j 4 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:12:09 2019
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin18.7.0-1
 Config: devel/expat-2.1.0-1.cfg
 Summary:
  Expat XML Parser v2.1.0 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://expat.sourceforge.net/
 Version:
  2.1.0
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
       sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.1.0
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --verbose \
  --prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
  --exec-prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
  --mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
  make -j 4 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:17:46 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
 Config: tools/rtems-gdb-8.3-1.cfg
 Summary:
  GDB v8.3 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  8.3
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
       sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-8.3"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "bfin-rtems5" -o "x86_64-apple-darwin18.7.0" == "bfin-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS=""
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC} \
  LIBS=${GDB_LIBS} \
  ../${source_dir_gdb}/configure \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --target=bfin-rtems5 \
  --verbose --disable-nls \
  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
  \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --enable-sim \
  \
  --without-zlib \
  --with-expat \
  --with-guile=no \
  --with-python=/usr/bin/python \
  --prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
  --exec-prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
  --mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
  make -j 4 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:17:47 2019
==============================================================================
Report: tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-8.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-8.3-1.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-gdb-8.3-x86_64-apple-darwin18.7.0-1
 Config: tools/rtems-gdb-8.3-1.cfg
 Summary:
  GDB v8.3 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  8.3
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-8.3.tar.xz
       sha512: 47ac074d20a09a3fac8f4a41dce0a0cbe6ef702f7dc21ba8b7d650d306128dcae481e9a16bf65e596b3a541dc82ae57c02bcbb786d551b4ef3e2917b9b6f0ae1
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-8.3"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "bfin-rtems5" -o "x86_64-apple-darwin18.7.0" == "bfin-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS=""
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC} \
  LIBS=${GDB_LIBS} \
  ../${source_dir_gdb}/configure \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --target=bfin-rtems5 \
  --verbose --disable-nls \
  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof \
  \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --enable-sim \
  \
  --without-zlib \
  --with-expat \
  --with-guile=no \
  --with-python=/usr/bin/python \
  --prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
  --exec-prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
  --mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
  make -j 4 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:19:41 2019
==============================================================================
Report: tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.32.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
 Config: tools/rtems-binutils-2.32.cfg
 Summary:
  Binutils v2.32 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.32
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.32.tar.bz2
       sha512: 99ec7ed2b5ebfd3ac16cecb1567ec4a72f81ac30717002d601708f7547b2f8122ffcce076c986f22894aede33c54c73012210a4e973ba9b6e2d87a242a2bee12
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.32"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "bfin-rtems5" -o "x86_64-apple-darwin18.7.0" == "bfin-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --target=bfin-rtems5 \
  --verbose --disable-nls \
  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
  --enable-deterministic-archives \
  --enable-64-bit-bfd \
  \
  --disable-lto \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
  --exec-prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
  --mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
  make -j 4 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/5/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:19:41 2019
==============================================================================
Report: tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.32.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.32.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-binutils-2.32-x86_64-apple-darwin18.7.0-1
 Config: tools/rtems-binutils-2.32.cfg
 Summary:
  Binutils v2.32 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.32
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.32.tar.bz2
       sha512: 99ec7ed2b5ebfd3ac16cecb1567ec4a72f81ac30717002d601708f7547b2f8122ffcce076c986f22894aede33c54c73012210a4e973ba9b6e2d87a242a2bee12
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.32"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "bfin-rtems5" -o "x86_64-apple-darwin18.7.0" == "bfin-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --target=bfin-rtems5 \
  --verbose --disable-nls \
  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim \
  --enable-deterministic-archives \
  --enable-64-bit-bfd \
  \
  --disable-lto \
  --without-included-gettext \
  --disable-win32-registry \
  --disable-werror \
  --prefix=/opt/work/builds/tools/5 --bindir=/opt/work/builds/tools/5/bin \
  --exec-prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include --libdir=/opt/work/builds/tools/5/lib \
  --mandir=/opt/work/builds/tools/5/share/man --infodir=/opt/work/builds/tools/5/share/info
  make -j 4 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  touch $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/5/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/bin/bfin-rtems5-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/share/man/man1/bfin-rtems5-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:32:28 2019
==============================================================================
Report: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
 Config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
 Summary:
  GCC vfb371a33fa6 and Newlib v6661a67 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://gcc.gnu.org/
 Version:
  fb371a33fa6
 Release:
  1
  Sources: 6
    1: --rsb-file=gnu-mirror-gcc-fb371a33fa6.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6
       No checksum
    2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    3: --rsb-file=newlib-6661a67.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67
       No checksum
    4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
       sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
    5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
    6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
       sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
  Patches: 1
    1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
       No checksum
    2: https://devel.rtems.org/raw-attachment/ticket/3171/darwin-libstdcpp-noparallel-fix.patch
       sha512: 01fa1bd55f19b01f10c41fdfe31356a7a4ddf265ebac8f4b974ccd1718181fd56bcb18a96e0492aa37511f08b37f94052a5557e21075604fceee06d80ffbb7d8
 Preparation:
  build_top=$(pwd)
  gcc_source=gnu-mirror-gcc-fb371a33fa6
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-6661a67
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.16.1"
  %setup source isl -q -D -n isl-0.16.1
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpfr="mpfr-3.1.4"
  %setup source mpfr -q -D -n mpfr-3.1.4
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.1.0"
  %setup source gmp -q -D -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 5, RSB d8b2719ae6f71c3380fc32aa34ac0796b98af236, Newlib 6661a67" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "bfin-rtems5" -o "x86_64-apple-darwin18.7.0" == "bfin-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure \
  --prefix=/opt/work/builds/tools/5 \
  --bindir=/opt/work/builds/tools/5/bin \
  --exec_prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include \
  --libdir=/opt/work/builds/tools/5/lib \
  --libexecdir=/opt/work/builds/tools/5/libexec \
  --mandir=/opt/work/builds/tools/5/share/man \
  --infodir=/opt/work/builds/tools/5/share/info \
  --datadir=/opt/work/builds/tools/5/share \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --target=bfin-rtems5 \
  --disable-libstdcxx-pch \
  --with-gnu-as --with-gnu-ld --verbose \
  --with-newlib \
  --disable-nls --without-included-gettext \
  --disable-win32-registry \
  --enable-version-specific-runtime-libs \
  --disable-lto \
  --enable-newlib-io-c99-formats \
  \
  --enable-newlib-iconv \
  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
  --enable-threads \
  --disable-plugin \
  \
  \
  \
  --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  make -j 4 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/bin/bfin-rtems5-c++filt
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:32:28 2019
==============================================================================
Report: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
------------------------------------------------------------------------------
Package: bfin-rtems5-gcc-fb371a33fa6-newlib-6661a67-x86_64-apple-darwin18.7.0-1
 Config: tools/rtems-gcc-fb371a33fa6-newlib-6661a67.cfg
 Summary:
  GCC vfb371a33fa6 and Newlib v6661a67 for target bfin-rtems5 on host x86_64-apple-darwin18.7.0
 URL:
  http://gcc.gnu.org/
 Version:
  fb371a33fa6
 Release:
  1
  Sources: 6
    1: --rsb-file=gnu-mirror-gcc-fb371a33fa6.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/fb371a33fa6
       No checksum
    2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    3: --rsb-file=newlib-6661a67.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6661a67
       No checksum
    4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.16.1.tar.bz2
       sha512: c188667a84dc5bdddb4ab7c35f89c91bf15a8171f4fcaf41301cf285fb7328846d9a367c096012fec4cc69d244f0bc9e95d84c09ec097394cd4093076f2a041b
    5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
    6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
       sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
  Patches: 1
    1: https://gcc.gnu.org/bugzilla/attachment.cgi?id=41380
       No checksum
    2: https://devel.rtems.org/raw-attachment/ticket/3171/darwin-libstdcpp-noparallel-fix.patch
       sha512: 01fa1bd55f19b01f10c41fdfe31356a7a4ddf265ebac8f4b974ccd1718181fd56bcb18a96e0492aa37511f08b37f94052a5557e21075604fceee06d80ffbb7d8
 Preparation:
  build_top=$(pwd)
  gcc_source=gnu-mirror-gcc-fb371a33fa6
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-6661a67
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.16.1"
  %setup source isl -q -D -n isl-0.16.1
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpfr="mpfr-3.1.4"
  %setup source mpfr -q -D -n mpfr-3.1.4
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.1.0"
  %setup source gmp -q -D -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 5, RSB d8b2719ae6f71c3380fc32aa34ac0796b98af236, Newlib 6661a67" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "bfin-rtems5" -o "x86_64-apple-darwin18.7.0" == "bfin-rtems5" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
    # Cross build
    CC=$(echo "x86_64-apple-darwin18.7.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-apple-darwin18.7.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure \
  --prefix=/opt/work/builds/tools/5 \
  --bindir=/opt/work/builds/tools/5/bin \
  --exec_prefix=/opt/work/builds/tools/5 \
  --includedir=/opt/work/builds/tools/5/include \
  --libdir=/opt/work/builds/tools/5/lib \
  --libexecdir=/opt/work/builds/tools/5/libexec \
  --mandir=/opt/work/builds/tools/5/share/man \
  --infodir=/opt/work/builds/tools/5/share/info \
  --datadir=/opt/work/builds/tools/5/share \
  --build=x86_64-apple-darwin18.7.0 --host=x86_64-apple-darwin18.7.0 \
  --target=bfin-rtems5 \
  --disable-libstdcxx-pch \
  --with-gnu-as --with-gnu-ld --verbose \
  --with-newlib \
  --disable-nls --without-included-gettext \
  --disable-win32-registry \
  --enable-version-specific-runtime-libs \
  --disable-lto \
  --enable-newlib-io-c99-formats \
  \
  --enable-newlib-iconv \
  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 \
  --enable-threads \
  --disable-plugin \
  \
  \
  \
  --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  make -j 4 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/5/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/bin/bfin-rtems5-c++filt
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/5/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:33:19 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1
 Config: tools/rtems-tools-5-1.cfg
 Summary:
  RTEMS Tools 0c986b2f6add49f4e65779755a359b933f183c0e for host x86_64-apple-darwin18.7.0
 URL:
  http://www.rtems.org/
 Version:
  0c986b2f6add49f4e65779755a359b933f183c0e
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e.tar.bz2
       sha512: niIdBJ3FTDzSL/l+DyNMvqoEVxcWe7PXR/7XD9AU2MTutKN0ihHxdKH4YE4+WKo28RxLXbCXm7HNuLF9/vLYew==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
  RT_HOST="--host=x86_64-apple-darwin18.7.0"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/5
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep  6 12:33:19 2019
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
   1: origin: git://git.rtems.org/rtems-source-builder.git
 Status:
  Clean
 Head:
  Commit: d8b2719ae6f71c3380fc32aa34ac0796b98af236
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e-1
 Config: tools/rtems-tools-5-1.cfg
 Summary:
  RTEMS Tools 0c986b2f6add49f4e65779755a359b933f183c0e for host x86_64-apple-darwin18.7.0
 URL:
  http://www.rtems.org/
 Version:
  0c986b2f6add49f4e65779755a359b933f183c0e
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e.tar.bz2
       sha512: niIdBJ3FTDzSL/l+DyNMvqoEVxcWe7PXR/7XD9AU2MTutKN0ihHxdKH4YE4+WKo28RxLXbCXm7HNuLF9/vLYew==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-0c986b2f6add49f4e65779755a359b933f183c0e
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-apple-darwin18.7.0" != "x86_64-apple-darwin18.7.0" ; then
  RT_HOST="--host=x86_64-apple-darwin18.7.0"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/5
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}


More information about the build mailing list