[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:566 Failed:18 Timeout:1 Invalid:0 Wrong:0
joel at rtems.org
joel at rtems.org
Fri Jan 17 23:36:14 UTC 2020
Testing time : 0:26:22.750881
Average test time: 0:00:02.664564
Host
====
Linux-3.10.0-1062.4.3.el7.x86_64-x86_64-with-centos-7.7.1908-Core (Linux devel.oarcorp.com 3.10.0-1062.4.3.el7.x86_64 #1 SMP Wed Nov 13 23:58:53 UTC 2019 x86_64 x86_64)
Configuration
=============
Version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
Build : RTEMS_POSIX_API
Tools : 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
Summary
=======
Passed: 566
Failed: 18
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 1
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 594
Failures:
fsimfsgeneric01.exe
block11.exe
devfs02.exe
dl06.exe
rbheap01.exe
termios01.exe
termios09.exe
psx12.exe
psxchroot01.exe
psxfenv01.exe
psximfs02.exe
psxpipe01.exe
spconfig02.exe
spfatal31.exe
spfifo02.exe
spmountmgr01.exe
spprivenv01.exe
spstdthreads01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
linpack.exe
dhrystone.exe
whetstone.exe
Timeouts:
fsrfsbitmap01.exe
Log
===
RTEMS Testing - Tester, 5 (29ad0ec7a8ec)
Command Line: /home/joel/rtems-cron-5/rtems-tools//tester/rtems-test --rtems-tools=/home/joel/rtems-cron-5/tools/5 --rtems-bsp=psim --log=run.log --mail --mail-from=joel at rtems.org --mail-to=build at rtems.org .
Host: Linux devel.oarcorp.com 3.10.0-1062.4.3.el7.x86_64 #1 SMP Wed Nov 13 23:58:53 UTC 2019 x86_64
Python: 3.6.9 (default, Nov 11 2019, 11:24:16) [GCC 4.8.5 20150623 (Red Hat 4.8.5-39)]
Host: Linux-3.10.0-1062.4.3.el7.x86_64-x86_64-with-centos-7.7.1908-Core (Linux devel.oarcorp.com 3.10.0-1062.4.3.el7.x86_64 #1 SMP Wed Nov 13 23:58:53 UTC 2019 x86_64 x86_64)
[ 1/594] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/594] p:4 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed Time: 0:00:15.903173 fsimfsgeneric01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] ../../../../../../rtems/c/src/../../testsuites/fstests/fsimfsgeneric01/init.c: 272 *state == TEST_NEW
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 16/594] p:7 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsjffs2gc01.exe
<<skipping passes>>
[ 18/594] p:7 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsrfsbitmap01.exe
Result: timeout Time: 0:03:10.151891 fsrfsbitmap01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/fstests/fsrfsbitmap01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/fstests/fsrfsbitmap01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/fstests/fsrfsbitmap01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: FSRFSBITMAP 1
] *** BEGIN OF TEST FSRFSBITMAP 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Initializing filesystem RFS
] START of RFS Bitmap Unit Test
] Bit set value : 0
] Bit clear value : 1
] Num bit per element : 32
] RFS Bitmap Test : size = 4096 (128)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (4095): pass (Success): bit = 4095
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (4095): pass (Success)
] 7. Test bit 32 in range (1,4094] is set: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 3165: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 3165
] 11. Fail to find bit with seed = 0: pass (Success): bit = 2048
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (4095): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 4095
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (2048): pass (Success): bit = 0
] 18. Clear bit (size - 1) (4095): pass, (Success)
] 19. Find bit with seed = (size / 2) (2048): pass (Success): bit = 4095
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (2047): pass (Success): bit = 0
] 22. Clear bit (size - 1) (4095): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (2047): pass (Success): bit = 4095
] 23. Set all bits
] 23. Cleared bits (692, 723] (32)
] 23. Cleared bit still set: bit = 692
] RFS Bitmap Test : size = 2048 (64)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (2047): pass (Success): bit = 2047
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (2047): pass (Success)
] 7. Test bit 32 in range (1,2046] is set: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 1674: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 1674
] 11. Fail to find bit with seed = 0: pass (Success): bit = 0
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (2047): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 2047
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (1024): pass (Success): bit = 0
] 18. Clear bit (size - 1) (2047): pass, (Success)
] 19. Find bit with seed = (size / 2) (1024): pass (Success): bit = 2047
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (1023): pass (Success): bit = 0
] 22. Clear bit (size - 1) (2047): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (1023): pass (Success): bit = 2047
] 23. Set all bits
] 23. Cleared bits (650, 681] (32)
] 23. Cleared bit still set: bit = 672
] RFS Bitmap Test : size = 420 (14)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (419): pass (Success): bit = 419
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (419): pass (Success)
] 7. Test bit 32 in range (1,418] is set: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 359: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 359
] 11. Fail to find bit with seed = 0: pass (Success): bit = 0
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (419): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 419
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (210): pass (Success): bit = 0
] 18. Clear bit (size - 1) (419): pass, (Success)
] 19. Find bit with seed = (size / 2) (210): pass (Success): bit = 419
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (209): pass (Success): bit = 0
] 22. Clear bit (size - 1) (419): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (209): pass (Success): bit = 419
] 23. Set all bits
] 23. Cleared bits (126, 157] (32)
] 23. Cleared bit still set: bit = 126
] Testing bitmap_map functions with zero initialized bitmap control pointer
] Allocate most of memory - attempt to fail while open bitmap - expect ENOMEM
] *** TIMEOUT TIMEOUT
[ 19/594] p:11 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsrofs01.exe
<<skipping passes>>
[ 70/594] p:58 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: block11.exe
Result: failed Time: 0:00:14.200933 block11.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/block11.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/block11.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/block11.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: BLOCK 11
] *** BEGIN OF TEST BLOCK 11 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] ../../../../../../rtems/c/src/../../testsuites/libtests/block11/init.c: 297 sc == RTEMS_NO_MEMORY
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 71/594] p:60 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: block12.exe
<<skipping passes>>
[ 84/594] p:71 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: devfs02.exe
Result: failed Time: 0:00:16.027796 devfs02.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/devfs02.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/devfs02.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/devfs02.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: DEVFS 2
] *** BEGIN OF TEST DEVFS 2 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Init - attempt to create a fifo - expect ENOTSUP
] Init - set device table size to zero
] Init - attempt to create a node - expect ENOSPC
] Init - restore device table size
] Init - attempt to create a node - expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/libtests/devfs02/init.c: 71 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 85/594] p:73 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: devfs03.exe
<<skipping passes>>
[ 94/594] p:79 f:3 u:0 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed Time: 0:00:15.224962 dl06.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/dl06.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/dl06.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/dl06.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] load: /dl06.rap
] dlopen failed: (null)
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 95/594] p:81 f:3 u:0 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[123/594] p:105 f:4 u:2 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: rbheap01.exe
Result: failed Time: 0:00:14.926365 rbheap01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/rbheap01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/rbheap01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/rbheap01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: RBHEAP 1
] *** BEGIN OF TEST RBHEAP 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] ../../../../../../rtems/c/src/../../testsuites/libtests/rbheap01/init.c: 375 p == NULL
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[124/594] p:107 f:4 u:2 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: record01.exe
<<skipping passes>>
[138/594] p:120 f:5 u:2 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: termios01.exe
Result: failed Time: 0:00:19.800248 termios01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/termios01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/termios01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/termios01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: TERMIOS 1
] *** BEGIN OF TEST TERMIOS 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Test termios_baud2index...
] termios_baud_to_index(-2) - NOT OK
] termios_baud_to_index(B0) - OK
] termios_baud_to_index(B50) - OK
] termios_baud_to_index(B75) - OK
] termios_baud_to_index(B110) - OK
] termios_baud_to_index(B134) - OK
] termios_baud_to_index(B150) - OK
] termios_baud_to_index(B200) - OK
] termios_baud_to_index(B300) - OK
] termios_baud_to_index(B600) - OK
] termios_baud_to_index(B1200) - OK
] termios_baud_to_index(B1800) - OK
] termios_baud_to_index(B2400) - OK
] termios_baud_to_index(B4800) - OK
] termios_baud_to_index(B9600) - OK
] termios_baud_to_index(B19200) - OK
] termios_baud_to_index(B38400) - OK
] termios_baud_to_index(B7200) - OK
] termios_baud_to_index(B14400) - OK
] termios_baud_to_index(B28800) - OK
] termios_baud_to_index(B57600) - OK
] termios_baud_to_index(B76800) - OK
] termios_baud_to_index(B115200) - OK
] termios_baud_to_index(B230400) - OK
] termios_baud_to_index(B460800) - OK
] termios_baud_to_index(B921600) - OK
] Test termios_baud2number...
] termios_baud_to_number(-2) - NOT OK
] termios_baud_to_number(B0) - OK
] termios_baud_to_number(B50) - OK
] termios_baud_to_number(B75) - OK
] termios_baud_to_number(B110) - OK
] termios_baud_to_number(B134) - OK
] termios_baud_to_number(B150) - OK
] termios_baud_to_number(B200) - OK
] termios_baud_to_number(B300) - OK
] termios_baud_to_number(B600) - OK
] termios_baud_to_number(B1200) - OK
] termios_baud_to_number(B1800) - OK
] termios_baud_to_number(B2400) - OK
] termios_baud_to_number(B4800) - OK
] termios_baud_to_number(B9600) - OK
] termios_baud_to_number(B19200) - OK
] termios_baud_to_number(B38400) - OK
] termios_baud_to_number(B7200) - OK
] termios_baud_to_number(B14400) - OK
] termios_baud_to_number(B28800) - OK
] termios_baud_to_number(B57600) - OK
] termios_baud_to_number(B76800) - OK
] termios_baud_to_number(B115200) - OK
] termios_baud_to_number(B230400) - OK
] termios_baud_to_number(B460800) - OK
] termios_baud_to_number(B921600) - OK
] Test termios_number_to_baud...
] termios_number_to_baud(-2) - NOT OK
] termios_number_to_baud(B0) - OK
] termios_number_to_baud(B50) - OK
] termios_number_to_baud(B75) - OK
] termios_number_to_baud(B110) - OK
] termios_number_to_baud(B134) - OK
] termios_number_to_baud(B150) - OK
] termios_number_to_baud(B200) - OK
] termios_number_to_baud(B300) - OK
] termios_number_to_baud(B600) - OK
] termios_number_to_baud(B1200) - OK
] termios_number_to_baud(B1800) - OK
] termios_number_to_baud(B2400) - OK
] termios_number_to_baud(B4800) - OK
] termios_number_to_baud(B9600) - OK
] termios_number_to_baud(B19200) - OK
] termios_number_to_baud(B38400) - OK
] termios_number_to_baud(B7200) - OK
] termios_number_to_baud(B14400) - OK
] termios_number_to_baud(B28800) - OK
] termios_number_to_baud(B57600) - OK
] termios_number_to_baud(B76800) - OK
] termios_number_to_baud(B115200) - OK
] termios_number_to_baud(B230400) - OK
] termios_number_to_baud(B460800) - OK
] termios_number_to_baud(B921600) - OK
] Init - rtems_io_register_driver - Termios Test Driver - OK
] Termios_test_driver - rtems_io_register /dev/test - OK
] Init - Major slot returned = 1
] Init - open - /dev/test - OK
] ../../../../../../rtems/c/src/../../testsuites/libtests/termios01/termios_testdriver.c: 200 sc == RTEMS_NO_MEMORY
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[139/594] p:120 f:5 u:2 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: termios02.exe
<<skipping passes>>
[146/594] p:126 f:6 u:3 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: termios09.exe
Result: failed Time: 0:00:20.381271 termios09.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/termios09.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/termios09.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/termios09.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: TERMIOS 9
] *** BEGIN OF TEST TERMIOS 9 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] ../../../../../../rtems/c/src/../../testsuites/libtests/termios09/init.c: 542 n == 2
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[147/594] p:126 f:6 u:3 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: termios10.exe
<<skipping passes>>
[165/594] p:143 f:7 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed Time: 0:00:19.500274 psx12.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psx12.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 96ms
] [0] L 196ms
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psx12/init.c: 224 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 071]
[166/594] p:143 f:7 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[179/594] p:155 f:8 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxchroot01.exe
Result: failed Time: 0:00:19.660902 psxchroot01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psxchroot01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psxchroot01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psxchroot01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: PSXCHROOT 1
] *** BEGIN OF TEST PSXCHROOT 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] chroot with bad path - expect ENOENT
] chroot with file - expect ENOTDIR
] allocate most of memory - attempt to fail chroot - expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psxchroot01/test.c: 126 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[180/594] p:159 f:8 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxclassic01.exe
<<skipping passes>>
[197/594] p:172 f:9 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxfenv01.exe
Result: failed Time: 0:00:18.851071 psxfenv01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psxfenv01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psxfenv01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psxfenv01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: PSXFENV 01
] *** BEGIN OF TEST PSXFENV 01 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] fesetenv(FE_DFL_ENV).
] fesetenv ==> -134
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psxfenv01/init.c: 74 r == 0
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[198/594] p:174 f:9 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxfile01.exe
<<skipping passes>>
[207/594] p:181 f:10 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psximfs02.exe
Result: failed Time: 0:00:18.292053 psximfs02.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psximfs02.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psximfs02.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psximfs02.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: PSXIMFS 2
] *** BEGIN OF TEST PSXIMFS 2 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Creating directory /dir00
] Creating directory /dir00/dir01
] Changing directory to /dir00
] Creating link dir01-link0 for dir01
] Creating link dir01-link0001 for dir01-link0000
] Link creation failed
] Creating a regular node /node, RDONLY
] Creating link /node-link for /node
] Opening /node-link in WRONLY mode -- expect EACCES
] Creating a symlink /node-slink for /node
] Opening /node-slink in WRONLY mode -- expect EACCES
] Allocate most of heap
] Attempt to mount a fs at dir01 -- expect ENOMEM../../../../../../rtems/c/src/../../testsuites/psxtests/psximfs02/init.c: 114 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[208/594] p:182 f:10 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxintrcritical01.exe
<<skipping passes>>
[233/594] p:208 f:11 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxpipe01.exe
Result: failed Time: 0:00:21.816122 psxpipe01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psxpipe01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psxpipe01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psxpipe01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: PSXPIPE 1
] *** BEGIN OF TEST PSXPIPE 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Init - attempt to create pipe -- expect EFAULT
] Init - create pipe -- OK
] Init - create pipe -- OK
] Init - attempt to create pipe -- expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psxpipe01/init.c: 66 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[234/594] p:208 f:11 u:4 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: psxrdwrv.exe
<<skipping passes>>
[418/594] p:388 f:12 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spconfig02.exe
Result: failed Time: 0:00:18.535239 spconfig02.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spconfig02.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spconfig02.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spconfig02.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: SPCONFIG 2
] *** BEGIN OF TEST SPCONFIG 2 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] ../../../../../../rtems/c/src/../../testsuites/sptests/spconfig02/init.c: 378 name_of_id == rtems_build_name('I', 'D', 'L', 'E')
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[419/594] p:389 f:12 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spconsole01.exe
<<skipping passes>>
[455/594] p:424 f:13 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfatal31.exe
Result: failed Time: 0:00:20.554824 spfatal31.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spfatal31.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spfatal31.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spfatal31.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: SPFATAL 31
] *** BEGIN OF TEST SPFATAL 31 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
] exception vector 8 (0x8)
] next PC or address of fault = 0x00000248
] saved MSR = 0x00000042
] context = interrupt, ISR nest level = 1
] thread dispatch disable level = 1
] R0 = 0x00011abc R1 = 0x0002aa48 R2 = 0x00000000 R3 = 0x12010001
] R4 = 0x00000000 R5 = 0x00000001 R6 = 0x00000001 R7 = 0x00000000
] R8 = 0x00000001 R9 = 0x00010000 R10 = 0x00000001 R11 = 0x0000d5e5
] R12 = 0x0000d5e6 R13 = 0x0001ec80 R14 = 0x0002ca30 R15 = 0x00000000
] R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
] R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
] R24 = 0x00000000 R25 = 0x00000000 R26 = 0x00000001 R27 = 0x00000002
] R28 = 0x0002aa80 R29 = 0x00000000 R30 = 0x000286f0 R31 = 0x000282c0
] CR = 0x40840404
] CTR = 0x00000244
] XER = 0x00000000
] LR = 0x000119e8
] DAR = 0x00000000
] executing thread ID = 0x09010001, name = IDLE
] Stack Trace:
] IP: 0x00000248, LR: 0x000119e8
] --^ 0x00011abc--^ 0x0000efd4--^ 0x00000514--^ 0x00000720--^ 0x00004b1c
] --^ 0x00003fd0
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x089010001
] executing thread name: IDLE
=> [Inferior 1 (process 42000) exited with code 075]
[456/594] p:426 f:13 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfatal32.exe
<<skipping passes>>
[458/594] p:428 f:13 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfifo02.exe
Result: failed Time: 0:00:17.546582 spfifo02.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spfifo02.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spfifo02.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spfifo02.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: SPFIFO 2
] *** BEGIN OF TEST SPFIFO 2 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Creating FIFO
] Opening FIFO.. expect ENOMEM since no memory is available
] expect status=3 errno=0/(Success)
] ../../../../../../rtems/c/src/../../testsuites/sptests/spfifo02/init.c: 43 fd == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[459/594] p:428 f:13 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfifo03.exe
<<skipping passes>>
[494/594] p:461 f:15 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spmountmgr01.exe
Result: failed Time: 0:00:14.883630 spmountmgr01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spmountmgr01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spmountmgr01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spmountmgr01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: SPMOUNTMGR 1
] *** BEGIN OF TEST SPMOUNTMGR 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Init - allocating most of heap -- OK
] Init - attempt to register filesystem fs - expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/sptests/spmountmgr01/init.c: 52 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[495/594] p:463 f:15 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spmrsp01.exe
<<skipping passes>>
[506/594] p:472 f:16 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spprivenv01.exe
Result: failed Time: 0:00:20.143660 spprivenv01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spprivenv01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spprivenv01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spprivenv01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: SPPRIVENV 1
] *** BEGIN OF TEST SPPRIVENV 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] Init - allocating most of heap -- OK
] Init - attempt to reset env - expect RTEMS_NO_MEMORY
] ../../../../../../rtems/c/src/../../testsuites/sptests/spprivenv01/init.c: 59 sc == RTEMS_NO_MEMORY
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[507/594] p:474 f:16 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spprofiling01.exe
<<skipping passes>>
[525/594] p:490 f:17 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spstdthreads01.exe
Result: failed Time: 0:00:18.929170 spstdthreads01.exe
=> gdb: /home/joel/rtems-cron-5/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spstdthreads01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spstdthreads01.exe...
=> target sim -f /home/joel/rtems-cron-5/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spstdthreads01.exe
] OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (1) from configuration with 16
] OpenPIC timer frequency is not set
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0
=> test start: SPSTDTHREADS 1
] *** BEGIN OF TEST SPSTDTHREADS 1 ***
] *** TEST VERSION: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] ../../../../../../rtems/c/src/../../testsuites/sptests/spstdthreads01/init.c: 273 status == thrd_nomem
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ebf0f8f13fb2fd7a2f40bf8428f423f6ebbe0860-modified
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (d48abf49ab0a), Newlib d14714c69)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[526/594] p:492 f:17 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spstkalloc.exe
<<skipping passes>>
[594/594] p:558 f:18 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: tmtimer01.exe
Passed: 566
Failed: 18
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 1
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 594
Failures:
fsimfsgeneric01.exe
block11.exe
devfs02.exe
dl06.exe
rbheap01.exe
termios01.exe
termios09.exe
psx12.exe
psxchroot01.exe
psxfenv01.exe
psximfs02.exe
psxpipe01.exe
spconfig02.exe
spfatal31.exe
spfifo02.exe
spmountmgr01.exe
spprivenv01.exe
spstdthreads01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
linpack.exe
dhrystone.exe
whetstone.exe
Timeouts:
fsrfsbitmap01.exe
Average test time: 0:00:02.664564
Testing time : 0:26:22.750881
More information about the build
mailing list