[rtems-test] arm/beagleboneblack: RTEMS_POSIX_API: Passed:571 Failed:4 Timeout:0 Invalid:0 Wrong:0
chrisj at rtems.org
chrisj at rtems.org
Thu Jun 4 08:12:54 UTC 2020
Testing time : 2:17:10.070764
Average test time: 0:00:13.902147
Host
====
FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD hihi 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
Configuration
=============
Version: 5.0.0-m2006-1
Build : RTEMS_POSIX_API
Tools : 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
Summary
=======
Passed: 571
Failed: 4
User Input: 6
Expected Fail: 8
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 592
Failures:
spintrcritical01.exe
spintrcritical03.exe
spintrcritical04.exe
spintrcritical16.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
dl06.exe
i2c01.exe
psxfenv01.exe
spcache01.exe
spintrcritical21.exe
spsysinit01.exe
tmcontext01.exe
tmtimer01.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Log
===
RTEMS Testing - Tester, 5.0.0-m2006-1
Command Line: /build/rtems/releases/install/5.0.0-m2006-1/bin/rtems-test --rtems-bsp=beagleboneblack --mail --mail-from=chrisj at rtems.org --to=build at rtems.org /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests
Host: FreeBSD hihi 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64
Python: 3.7.6 (default, Jan 30 2020, 01:18:54) [Clang 6.0.1 (tags/RELEASE_601/final 335540)]
Host: FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD hihi 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
[ 1/592] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | arm/beagleboneblack: base_sp.exe
<<skipping passes>>
[441/592] p:430 f:0 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical01.exe
Result: failed Time: 0:00:55.619371 spintrcritical01.exe
=> target exe filter: find:\.exe subst:.exe.img -> /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical01.exe.img
=> target pretest: rtems-bbb-mkimg /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical01.exe
=> Image: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical01.exe
=> tftp: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical01.exe.img
] T ###
] 6.8 KiB/s
] done
] Bytes transferred = 38881 (97e1 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2020-06-04 7:34:51 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38817 Bytes = 37.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPINTRCRITICAL 1
] *** BEGIN OF TEST SPINTRCRITICAL 1 ***
] *** TEST VERSION: 5.0.0-m2006-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: FIFO/Without Timeout
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2006-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.191 (3 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.191
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[442/592] p:430 f:1 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical02.exe
[443/592] p:431 f:1 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical03.exe
Result: failed Time: 0:00:51.565432 spintrcritical03.exe
=> target exe filter: find:\.exe subst:.exe.img -> /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical03.exe.img
=> target pretest: rtems-bbb-mkimg /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical03.exe
=> Image: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical03.exe
=> tftp: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical03.exe.img
] T ###
] 6.8 KiB/s
] done
] Bytes transferred = 38878 (97de hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2020-06-04 7:35:59 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38814 Bytes = 37.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPINTRCRITICAL 3
] *** BEGIN OF TEST SPINTRCRITICAL 3 ***
] *** TEST VERSION: 5.0.0-m2006-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2006-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.191 (4 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.191
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[444/592] p:431 f:2 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical04.exe
Result: failed Time: 0:00:51.129648 spintrcritical04.exe
=> target exe filter: find:\.exe subst:.exe.img -> /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical04.exe.img
=> target pretest: rtems-bbb-mkimg /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical04.exe
=> Image: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical04.exe
=> tftp: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical04.exe.img
] T ###
] 6.8 KiB/s
] done
] Bytes transferred = 38886 (97e6 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2020-06-04 7:36:50 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38822 Bytes = 37.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPINTRCRITICAL 4
] *** BEGIN OF TEST SPINTRCRITICAL 4 ***
] *** TEST VERSION: 5.0.0-m2006-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/With Timeout
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2006-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.191 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.191
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[445/592] p:431 f:3 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical05.exe
<<skipping passes>>
[456/592] p:442 f:3 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical16.exe
Result: failed Time: 0:01:02.008880 spintrcritical16.exe
=> target exe filter: find:\.exe subst:.exe.img -> /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical16.exe.img
=> target pretest: rtems-bbb-mkimg /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical16.exe
=> Image: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical16.exe
=> tftp: /build/rtems/releases/install/5.0.0-m2006-1/arm-rtems5/beagleboneblack/tests/spintrcritical16.exe.img
] T ###
] 6.8 KiB/s
] done
] Bytes transferred = 38844 (97bc hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2020-06-04 7:44:40 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38780 Bytes = 37.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
] ARM Debug: 0x4b141000
]
]
=> test start: SPINTRCRITICAL 16
] *** BEGIN OF TEST SPINTRCRITICAL 16 ***
] *** TEST VERSION: 5.0.0-m2006-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] Init - Trying to generate timeout of a thread that had its blocking
] Init - request satisfied while blocking but before time timeout
] Init - rtems_semaphore_create - OK
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2006-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2006-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[457/592] p:442 f:4 u:4 e:4 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical18.exe
<<skipping passes>>
[592/592] p:571 f:4 u:6 e:8 I:0 B:2 t:0 i:0 W:0 | arm/beagleboneblack: whetstone.exe
Passed: 571
Failed: 4
User Input: 6
Expected Fail: 8
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 592
Failures:
spintrcritical01.exe
spintrcritical03.exe
spintrcritical04.exe
spintrcritical16.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
dl06.exe
i2c01.exe
psxfenv01.exe
spcache01.exe
spintrcritical21.exe
spsysinit01.exe
tmcontext01.exe
tmtimer01.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Average test time: 0:00:13.902147
Testing time : 2:17:10.070764
More information about the build
mailing list