Build Linux: FAILED 6/rtems-sparc on x86_64-linux-gnu (sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1)
joel at rtems.org
joel at rtems.org
Tue Mar 24 03:41:27 UTC 2020
RTEMS Source Builder - Set Builder, 5 (68f90be3c8a2)
Host: Linux-4.15.0-91-generic-x86_64-with-Ubuntu-18.04-bionic
Linux rtbf64a 4.15.0-91-generic #92-Ubuntu SMP Fri Feb 28 11:09:48 UTC
2020 x86_64 x86_64
Build Time: 1:05:44.369241
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking for thread_db.h... (cached) yes
checking wait.h usability... yes
checking wait.h presence... yes
checking for wait.h... yes
checking for termios.h... (cached) yes
checking for dlfcn.h... (cached) yes
checking linux/elf.h usability... yes
checking linux/elf.h presence... yes
checking for linux/elf.h... yes
checking sys/procfs.h usability... yes
checking sys/procfs.h presence... yes
checking for sys/procfs.h... yes
checking proc_service.h usability... yes
checking proc_service.h presence... yes
checking for proc_service.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for fdwalk... no
checking for getrlimit... (cached) yes
checking for pipe... (cached) yes
checking for pipe2... yes
checking for socketpair... (cached) yes
checking for sigaction... (cached) yes
checking for ptrace64... no
checking for sbrk... yes
checking for setns... yes
checking for sigaltstack... yes
checking for sigprocmask... yes
checking for setpgid... yes
checking for setpgrp... yes
checking for getrusage... yes
checking for getauxval... yes
checking whether ADDR_NO_RANDOMIZE is declared... yes
checking whether strstr is declared... yes
checking for struct stat.st_blocks... yes
checking for struct stat.st_blksize... yes
checking for library containing kinfo_getfile... no
checking whether gcc -O2 -g -pipe -I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include is Clang... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking whether more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for std::thread... yes
checking for pthread_sigmask... yes
checking for pthread_setname_np... yes
checking for sigsetjmp... yes
checking whether to use intel pt... auto
checking for libipt... no
configure: WARNING: libipt is missing or unusable; some features may be unavailable.
checking for gregset_t in sys/procfs.h... no
checking for fpregset_t in sys/procfs.h... no
checking for prgregset_t in sys/procfs.h... yes
checking for prfpregset_t in sys/procfs.h... yes
checking for prgregset32_t in sys/procfs.h... no
checking for lwpid_t in sys/procfs.h... yes
checking for psaddr_t in sys/procfs.h... yes
checking for elf_fpregset_t in sys/procfs.h... yes
checking for sys/ptrace.h... (cached) yes
checking for ptrace.h... (cached) no
checking return type of ptrace... long
checking types of arguments for ptrace... enum __ptrace_request,int,long,long
checking whether setpgrp takes no argument... yes
checking for GNU regex... yes
checking for struct thread.td_pcb... no
checking for struct lwp... no
checking for struct reg in machine/reg.h... no
checking for struct reg.r_fs... no
checking for struct reg.r_gs... no
checking for struct user_regs_struct.fs_base... yes
checking for struct user_regs_struct.gs_base... yes
checking for PTRACE_GETREGS... yes
checking for PTRACE_GETFPXREGS... yes
checking for PT_GETDBREGS... no
checking for PT_GETXMMREGS... no
checking for struct ptrace_lwpinfo.pl_tdname... no
checking for struct ptrace_lwpinfo.pl_syscall_code... no
checking for long long support in compiler... yes
checking for long long support in printf... yes
checking for decfloat support in printf... no
checking for long double support in compiler... yes
checking for long double support in printf... yes
checking for long double support in scanf... yes
checking for the dynamic export flag... -rdynamic
checking whether <thread_db.h> has TD_NOTALLOC... yes
checking whether <thread_db.h> has TD_VERSION... yes
checking whether <thread_db.h> has TD_NOTLS... yes
checking compiler warning flags... -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-variable -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-error=maybe-uninitialized -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wshadow=local -Wmissing-declarations -Wstrict-null-sentinel -Wformat -Wformat-nonliteral
checking for cygwin... no
checking for ELF support in BFD... yes
checking for library containing dlopen... (cached) none required
checking for Mach-O support in BFD... no
checking whether to use lzma... auto
checking for liblzma... yes
checking how to link with liblzma... -llzma
checking for X... no
enable_sim = no
enableval = no
checking whether to use babeltrace... auto
checking for libbabeltrace... yes
checking how to link with libbabeltrace... -lbabeltrace -lbabeltrace-ctf
checking for libxxhash... no
checking whether to use xxhash... no
checking for xsltproc... /usr/bin/xsltproc
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating jit-reader.h
config.status: creating gcore
config.status: creating Makefile
config.status: creating gdb-gdb.gdb
config.status: creating gdb-gdb.py
config.status: creating doc/Makefile
config.status: creating data-directory/Makefile
config.status: creating config.h
config.status: executing depdir commands
mkdir -p -- .deps
=== configuring in testsuite (/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb/testsuite)
configure: running /bin/bash ../../../sourceware-mirror-binutils-gdb-2957d8d/gdb/testsuite/configure --disable-option-checking '--prefix=/home/joel/rtems-cron-6/tools/6' '--verbose' '--disable-nls' '--disable-gas' '--disable-binutils' '--disable-ld' '--disable-gold' '--disable-gprof' '--without-included-gettext' '--disable-win32-registry' '--disable-werror' '--disable-sim' '--without-zlib' '--with-expat' '--with-guile=no' '--with-python=/usr/bin/python2' '--bindir=/home/joel/rtems-cron-6/tools/6/bin' '--exec-prefix=/home/joel/rtems-cron-6/tools/6' '--includedir=/home/joel/rtems-cron-6/tools/6/include' '--libdir=/home/joel/rtems-cron-6/tools/6/lib' '--mandir=/home/joel/rtems-cron-6/tools/6/share/man' '--infodir=/home/joel/rtems-cron-6/tools/6/share/info' '--program-transform-name=s&^&sparc-rtems6-&' '--build=x86_64-linux-gnu' '--host=x86_64-linux-gnu' '--target=sparc-rtems6' 'build_alias=x86_64-linux-gnu' 'host_alias=x86_64-linux-gnu' 'target_alias=sparc-rtems6' 'CC=gcc -O2 -g -pipe
-I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include' 'CFLAGS=-g -O2' 'LDFLAGS= -L/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/lib' 'LIBS=' 'CXX=g++ -O2 -g -pipe -I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include' 'CXXFLAGS=-g -O2' 'MAKEINFO=makeinfo --split-size=5000000' 'YACC=bison -y' --cache-file=.././config.cache --srcdir=../../../sourceware-mirror-binutils-gdb-2957d8d/gdb/testsuite
configure: loading cache .././config.cache
checking build system type... (cached) x86_64-pc-linux-gnu
checking host system type... (cached) x86_64-pc-linux-gnu
checking target system type... (cached) sparc-unknown-rtems6
checking for x86_64-linux-gnu-gcc... (cached) gcc -O2 -g -pipe -I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... (cached) o
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc -O2 -g -pipe -I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include accepts -g... (cached) yes
checking for gcc -O2 -g -pipe -I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include option to accept ISO C89... (cached) none needed
checking how to run the C preprocessor... (cached) gcc -O2 -g -pipe -I/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001/6/rtems-sparc/home/joel/rtems-cron-6/tools/6/include -E
checking for grep that handles long lines and -e... (cached) /bin/grep
checking for egrep... (cached) /bin/grep -E
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
configure: updating cache .././config.cache
configure: creating ./config.status
config.status: creating lib/pdtrace
config.status: creating Makefile
make[2]: Entering directory '/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb'
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs arch/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs cli/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs dwarf2/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs mi/.deps
mkdir -p -- arch/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs compile/.deps
mkdir -p -- mi/.deps
mkdir -p -- cli/.deps
mkdir -p -- dwarf2/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs tui/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs unittests/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs guile/.deps
mkdir -p -- tui/.deps
mkdir -p -- compile/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs python/.deps
mkdir -p -- unittests/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs target/.deps
mkdir -p -- guile/.deps
/bin/bash ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/../mkinstalldirs nat/.deps
mkdir -p -- python/.deps
LEX ada-lex.c
mkdir -p -- target/.deps
mkdir -p -- nat/.deps
YACC ada-exp.c
YACC c-exp.c
YACC cp-name-parser.c
YACC d-exp.c
/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb/../../sourceware-mirror-binutils-gdb-2957d8d/gdb/c-exp.y: warning: 153 shift/reduce conflicts [-Wconflicts-sr]
/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb/../../sourceware-mirror-binutils-gdb-2957d8d/gdb/c-exp.y: warning: 70 reduce/reduce conflicts [-Wconflicts-rr]
CXX d-lang.o
CXX d-namespace.o
CXX d-valprint.o
CXX dbxread.o
CXX dcache.o
CXX debug.o
CXX debuginfod-support.o
CXX dictionary.o
CXX disasm-selftests.o
CXX disasm.o
CXX dtrace-probe.o
CXX dummy-frame.o
CXX dwarf2/abbrev.o
CXX dwarf2/attribute.o
CXX dwarf2/comp-unit.o
CXX dwarf2/expr.o
CXX dwarf2/frame-tailcall.o
CXX dwarf2/frame.o
CXX dwarf2/index-cache.o
CXX dwarf2/index-common.o
CXX dwarf2/index-write.o
CXX dwarf2/leb.o
CXX dwarf2/line-header.o
CXX dwarf2/loc.o
CXX dwarf2/read.o
CXX dwarf2/section.o
CXX elfread.o
CXX eval.o
CXX event-loop.o
CXX event-top.o
CXX exceptions.o
CXX exec.o
CXX expprint.o
CXX extension.o
YACC f-exp.c
CXX f-lang.o
CXX f-typeprint.o
CXX f-valprint.o
CXX filename-seen-cache.o
CXX filesystem.o
CXX findcmd.o
CXX findvar.o
CXX frame-base.o
CXX frame-unwind.o
CXX frame.o
CXX gcore.o
CXX gdb-demangle.o
CXX gdb_bfd.o
CXX gdb_obstack.o
CXX gdb_regex.o
CXX gdbarch-selftests.o
CXX gdbarch.o
CXX gdbtypes.o
CXX gnu-v2-abi.o
CXX gnu-v3-abi.o
YACC go-exp.c
CXX go-lang.o
CXX go-typeprint.o
CXX go-valprint.o
CXX guile/guile.o
CXX inf-child.o
CXX inf-loop.o
CXX infcall.o
CXX infcmd.o
CXX inferior.o
CXX inflow.o
CXX infrun.o
CXX inline-frame.o
CXX interps.o
CXX jit.o
CXX language.o
CXX linespec.o
CXX location.o
YACC m2-exp.c
/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb/../../sourceware-mirror-binutils-gdb-2957d8d/gdb/m2-exp.y: warning: 34 shift/reduce conflicts [-Wconflicts-sr]
/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb/../../sourceware-mirror-binutils-gdb-2957d8d/gdb/m2-exp.y:301.25-52: warning: rule useless in parser due to conflicts [-Wother]
{ pstate->start_arglist(); }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
CXX m2-lang.o
In file included from ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/infrun.c:26:0:
../../sourceware-mirror-binutils-gdb-2957d8d/gdb/inferior.h: In function 'void handle_vfork_child_exec_or_exit(int)':
../../sourceware-mirror-binutils-gdb-2957d8d/gdb/inferior.h:627:26: warning: '*((void*)(& maybe_restore_inferior)+40).scoped_restore_current_inferior::m_saved_inf' may be used uninitialized in this function [-Wmaybe-uninitialized]
{ set_current_inferior (m_saved_inf); }
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
../../sourceware-mirror-binutils-gdb-2957d8d/gdb/infrun.c:951:6: note: '*((void*)(& maybe_restore_inferior)+40).scoped_restore_current_inferior::m_saved_inf' was declared here
maybe_restore_inferior;
^~~~~~~~~~~~~~~~~~~~~~
In file included from ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/inferior.h:49:0,
from ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/infrun.c:26:
../../sourceware-mirror-binutils-gdb-2957d8d/gdb/progspace.h:400:31: warning: '*((void*)(& maybe_restore_inferior)+32).scoped_restore_current_program_space::m_saved_pspace' may be used uninitialized in this function [-Wmaybe-uninitialized]
{ set_current_program_space (m_saved_pspace); }
~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
../../sourceware-mirror-binutils-gdb-2957d8d/gdb/infrun.c:951:6: note: '*((void*)(& maybe_restore_inferior)+32).scoped_restore_current_program_space::m_saved_pspace' was declared here
maybe_restore_inferior;
^~~~~~~~~~~~~~~~~~~~~~
CXX m2-typeprint.o
CXX m2-valprint.o
CXX macrocmd.o
CXX macroexp.o
CXX macroscope.o
CXX macrotab.o
CXX main.o
CXX maint-test-options.o
CXX maint-test-settings.o
CXX maint.o
CXX mdebugread.o
CXX mem-break.o
CXX memattr.o
CXX memory-map.o
CXX memrange.o
CXX mi/mi-cmd-break.o
CXX mi/mi-cmd-catch.o
CXX mi/mi-cmd-disas.o
CXX mi/mi-cmd-env.o
CXX mi/mi-cmd-file.o
CXX mi/mi-cmd-info.o
CXX mi/mi-cmd-stack.o
CXX mi/mi-cmd-target.o
CXX mi/mi-cmd-var.o
CXX mi/mi-cmds.o
CXX mi/mi-common.o
CXX mi/mi-console.o
CXX mi/mi-getopt.o
CXX mi/mi-interp.o
CXX mi/mi-main.o
CXX mi/mi-out.o
CXX mi/mi-parse.o
CXX mi/mi-symbol-cmds.o
CXX minidebug.o
CXX minsyms.o
CXX mipsread.o
CXX namespace.o
CXX objc-lang.o
CXX objfiles.o
CXX observable.o
CXX opencl-lang.o
CXX osabi.o
CXX osdata.o
YACC p-exp.c
CXX p-lang.o
CXX p-typeprint.o
CXX p-valprint.o
CXX parse.o
CXX posix-hdep.o
CXX printcmd.o
CXX probe.o
CXX process-stratum-target.o
CXX producer.o
CXX progspace-and-thread.o
CXX progspace.o
CXX prologue-value.o
CXX psymtab.o
CXX python/py-arch.o
CXX python/py-auto-load.o
CXX python/py-block.o
CXX python/py-bpevent.o
CXX python/py-breakpoint.o
CXX python/py-cmd.o
CXX python/py-continueevent.o
CXX python/py-event.o
CXX python/py-evtregistry.o
CXX python/py-evts.o
CXX python/py-exitedevent.o
CXX python/py-finishbreakpoint.o
CXX python/py-frame.o
CXX python/py-framefilter.o
CXX python/py-function.o
CXX python/py-gdb-readline.o
CXX python/py-inferior.o
CXX python/py-infevents.o
CXX python/py-infthread.o
CXX python/py-instruction.o
CXX python/py-lazy-string.o
CXX python/py-linetable.o
CXX python/py-newobjfileevent.o
CXX python/py-objfile.o
CXX python/py-param.o
CXX python/py-prettyprint.o
CXX python/py-progspace.o
CXX python/py-record-btrace.o
CXX python/py-record-full.o
CXX python/py-record.o
CXX python/py-signalevent.o
CXX python/py-stopevent.o
CXX python/py-symbol.o
CXX python/py-symtab.o
CXX python/py-threadevent.o
CXX python/py-tui.o
In file included from ../../sourceware-mirror-binutils-gdb-2957d8d/gdb/python/py-tui.c:24:0:
../../sourceware-mirror-binutils-gdb-2957d8d/gdb/gdb_curses.h:57:10: fatal error: term.h: No such file or directory
#include <term.h>
^~~~~~~~
compilation terminated.
Makefile:1602: recipe for target 'python/py-tui.o' failed
make[2]: *** [python/py-tui.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory '/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build/gdb'
Makefile:9730: recipe for target 'all-gdb' failed
make[1]: *** [all-gdb] Error 2
make[1]: Leaving directory '/home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/build'
Makefile:852: recipe for target 'all' failed
make: *** [all] Error 2
shell cmd failed: /bin/sh -ex /home/joel/rtems-cron-6/rtems-source-builder/rtems/build/sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1/do-build
error: building sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1
See error report: rsb-report-sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sizes
=====
Maximum build usage: 8.832GB
Total size: 1.927GB
Installed : 1.671GB
Sources: 262.046MB
Patches: 20.845KB
Output
======
Build Set: 6/rtems-sparc
Build Set: 6/rtems-autotools.bset
Build Set: 6/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.497MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-linux-gnu-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.087MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-linux-gnu-1
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Sizes: usage: 8.087MB total: 261.784MB (sources: 261.764MB, patches: 20.845KB, installed 0.000B)
Build Set: Time 0:00:10.729254
Build Set: 6/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
sizes: autoconf-2.69-x86_64-linux-gnu-1: 10.516MB (installed: 3.021MB)
cleaning: autoconf-2.69-x86_64-linux-gnu-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
sizes: automake-1.12.6-x86_64-linux-gnu-1: 10.350MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-linux-gnu-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
staging: autoconf-2.69-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001-staging
staging: automake-1.12.6-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001-staging
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Sizes: usage: 15.801MB total: 267.069MB (sources: 261.764MB, patches: 20.845KB, installed 5.285MB)
Build Set: Time 0:00:20.537326
Build Set: Time 0:00:31.273678
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-linux-gnu-1
building: expat-2.1.0-x86_64-linux-gnu-1
sizes: expat-2.1.0-x86_64-linux-gnu-1: 8.004MB (installed: 1.576MB)
cleaning: expat-2.1.0-x86_64-linux-gnu-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
config: tools/rtems-gdb-head.cfg
package: sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1
building: sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1
error: building sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1
Build FAILED
See error report: rsb-report-sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1.txt
error: building sparc-rtems6-gdb-2957d8d-x86_64-linux-gnu-1
config: tools/rtems-binutils-head.cfg
package: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1
building: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1
sizes: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1: 654.838MB (installed: 138.337MB)
cleaning: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-head.cfg -> sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-head.cfg -> sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-head-newlib-head.cfg
package: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1
building: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1
sizes: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1: 7.161GB (installed: 1.472GB)
cleaning: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1
reporting: tools/rtems-gcc-head-newlib-head.cfg -> sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gcc-head-newlib-head.cfg -> sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1.xml
config: tools/rtems-tools-5-1.cfg
package: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1
building: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1
sizes: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1: 229.536MB (installed: 63.175MB)
cleaning: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1.txt
reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1.xml
config: devel/sis-2-1.cfg
package: sis-2.21-x86_64-linux-gnu-1
download: https://git.rtems.org/sis/snapshot/sis-2.21.tar.bz2 -> sources/sis-2.21.tar.bz2
building: sis-2.21-x86_64-linux-gnu-1
sizes: sis-2.21-x86_64-linux-gnu-1: 3.867MB (installed: 637.782KB)
cleaning: sis-2.21-x86_64-linux-gnu-1
reporting: devel/sis-2-1.cfg -> sis-2.21-x86_64-linux-gnu-1.txt
reporting: devel/sis-2-1.cfg -> sis-2.21-x86_64-linux-gnu-1.xml
cleaning: expat-2.1.0-x86_64-linux-gnu-1
cleaning: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1
cleaning: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1
cleaning: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1
cleaning: sis-2.21-x86_64-linux-gnu-1
Build Sizes: usage: 8.832GB total: 1.927GB (sources: 262.046MB, patches: 20.845KB, installed 1.671GB)
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 21:36:28 2020
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sparc-rtems6 on host x86_64-linux-gnu
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --verbose --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin --exec-prefix=/home/joel/rtems-cron-6/tools/6 --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 21:36:28 2020
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target sparc-rtems6 on host x86_64-linux-gnu
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --verbose --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin --exec-prefix=/home/joel/rtems-cron-6/tools/6 --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 21:40:56 2020
==============================================================================
Report: tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
Package: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1
Config: tools/rtems-binutils-head.cfg
Summary:
Binutils v2957d8d for target sparc-rtems6 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2957d8d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-2957d8d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/2957d8d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-2957d8d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc-rtems6" -o "x86_64-linux-gnu" == "sparc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=sparc-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin --exec-prefix=/home/joel/rtems-cron-6/tools/6 --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 21:40:56 2020
==============================================================================
Report: tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
Package: sparc-rtems6-binutils-2957d8d-x86_64-linux-gnu-1
Config: tools/rtems-binutils-head.cfg
Summary:
Binutils v2957d8d for target sparc-rtems6 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2957d8d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-2957d8d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/2957d8d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-2957d8d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc-rtems6" -o "x86_64-linux-gnu" == "sparc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=sparc-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin --exec-prefix=/home/joel/rtems-cron-6/tools/6 --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/sparc-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 22:40:07 2020
==============================================================================
Report: tools/rtems-gcc-head-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-head-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-head-newlib-head.cfg
------------------------------------------------------------------------------
Package: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1
Config: tools/rtems-gcc-head-newlib-head.cfg
Summary:
GCC v6e00d8d and Newlib v6c8392d for target sparc-rtems6 on host x86_64-linux-gnu
URL:
http://gcc.gnu.org/
Version:
6e00d8d
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-6e00d8d.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/6e00d8d
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-6c8392d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6c8392d
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 0
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-6e00d8d
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-6c8392d
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.18"
%setup source isl -q -D -n isl-0.18
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 6, RSB 68f90be3c8a2d770a14d0319386ef19b650377d2, Newlib 6c8392d" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc-rtems6" -o "x86_64-linux-gnu" == "sparc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin --exec_prefix=/home/joel/rtems-cron-6/tools/6 --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib --libexecdir=/home/joel/rtems-cron-6/tools/6/libexec --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info --datadir=/home/joel/rtems-cron-6/tools/6/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=sparc-rtems6 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-c++filt
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 22:40:07 2020
==============================================================================
Report: tools/rtems-gcc-head-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-head-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-head-newlib-head.cfg
------------------------------------------------------------------------------
Package: sparc-rtems6-gcc-6e00d8d-newlib-6c8392d-x86_64-linux-gnu-1
Config: tools/rtems-gcc-head-newlib-head.cfg
Summary:
GCC v6e00d8d and Newlib v6c8392d for target sparc-rtems6 on host x86_64-linux-gnu
URL:
http://gcc.gnu.org/
Version:
6e00d8d
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-6e00d8d.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/6e00d8d
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-6c8392d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/6c8392d
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 0
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-6e00d8d
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-6c8392d
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.18"
%setup source isl -q -D -n isl-0.18
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 6, RSB 68f90be3c8a2d770a14d0319386ef19b650377d2, Newlib 6c8392d" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "sparc-rtems6" -o "x86_64-linux-gnu" == "sparc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin --exec_prefix=/home/joel/rtems-cron-6/tools/6 --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib --libexecdir=/home/joel/rtems-cron-6/tools/6/libexec --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info --datadir=/home/joel/rtems-cron-6/tools/6/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=sparc-rtems6 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/bin/sparc-rtems6-c++filt
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 22:40:55 2020
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 9b9e0dd47fe78c04f49be7750cdb7c267821b26f for host x86_64-linux-gnu
URL:
http://www.rtems.org/
Version:
9b9e0dd47fe78c04f49be7750cdb7c267821b26f
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f.tar.bz2
sha512: 0bda1863b5b4d522ff7cc5de5d56a7b1ca2616dbde362ab8070e60f6489eda7474f75ab616cc5bf0afc306d16248ee76ddbca85e9bc5b80ee8eefd5d8203d5be
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
RT_HOST="--host=x86_64-linux-gnu"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 22:40:55 2020
==============================================================================
Report: tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-5-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-5-1.cfg
------------------------------------------------------------------------------
Package: rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f-1
Config: tools/rtems-tools-5-1.cfg
Summary:
RTEMS Tools 9b9e0dd47fe78c04f49be7750cdb7c267821b26f for host x86_64-linux-gnu
URL:
http://www.rtems.org/
Version:
9b9e0dd47fe78c04f49be7750cdb7c267821b26f
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f.tar.bz2
sha512: 0bda1863b5b4d522ff7cc5de5d56a7b1ca2616dbde362ab8070e60f6489eda7474f75ab616cc5bf0afc306d16248ee76ddbca85e9bc5b80ee8eefd5d8203d5be
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-9b9e0dd47fe78c04f49be7750cdb7c267821b26f
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
RT_HOST="--host=x86_64-linux-gnu"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 22:41:01 2020
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.21-x86_64-linux-gnu-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.21 for host x86_64-linux-gnu
Version:
2.21
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.21.tar.bz2
sha256: 5274139971a7b4de0b27c7c5909c053a4b7d3959924cc16b3879abfbe9639656
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.21
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.21
ac_prefix=/home/joel/rtems-cron-6/tools/6
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "sparc-rtems6" != "" ; then
SIS_PREFIX="sparc-rtems6-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
make -j 4 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/home/joel/rtems-cron-6/tools/6/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.21
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Mon Mar 23 22:41:01 2020
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
1: origin: git://git.rtems.org/rtems-source-builder.git
Status:
Clean
Head:
Commit: 68f90be3c8a2d770a14d0319386ef19b650377d2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.21-x86_64-linux-gnu-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.21 for host x86_64-linux-gnu
Version:
2.21
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.21.tar.bz2
sha256: 5274139971a7b4de0b27c7c5909c053a4b7d3959924cc16b3879abfbe9639656
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.21
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.21
ac_prefix=/home/joel/rtems-cron-6/tools/6
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "sparc-rtems6" != "" ; then
SIS_PREFIX="sparc-rtems6-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
make -j 4 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/home/joel/rtems-cron-6/tools/6/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.21
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list