[rtems-test] powerpc/psim: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:563 Failed:18 Timeout:1 Invalid:0 Wrong:0
joel at rtems.org
joel at rtems.org
Sun May 3 13:40:56 UTC 2020
Testing time : 0:08:00.641498
Average test time: 0:00:00.813268
Host
====
Linux-4.15.0-91-generic-x86_64-with-Ubuntu-18.04-bionic (Linux rtbf64a 4.15.0-91-generic #92-Ubuntu SMP Fri Feb 28 11:09:48 UTC 2020 x86_64 x86_64)
Configuration
=============
Version: 5.0.0-m2005-1
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
Summary
=======
Passed: 563
Failed: 18
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 1
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 591
Failures:
fsimfsgeneric01.exe
fsrfsbitmap01.exe
block11.exe
dl06.exe
dl09.exe
rbheap01.exe
termios01.exe
psx12.exe
psxchroot01.exe
psxfenv01.exe
psximfs02.exe
psxpipe01.exe
spextensions01.exe
spfatal31.exe
spfifo02.exe
spmountmgr01.exe
spprivenv01.exe
spstdthreads01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
linpack.exe
dhrystone.exe
whetstone.exe
Timeouts:
crypt01.exe
Log
===
RTEMS Testing - Tester, 5.0.not_released
Command Line: /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools//tester/rtems-test --rtems-tools=/home/joel/rtems-cron-5.0.0-m2005-1/tools/5 --rtems-bsp=psim --log=run.log --mail --mail-from=joel at rtems.org --mail-to=build at rtems.org .
Host: Linux rtbf64a 4.15.0-91-generic #92-Ubuntu SMP Fri Feb 28 11:09:48 UTC 2020 x86_64
Python: 3.6.9 (default, Apr 18 2020, 01:56:04) [GCC 8.4.0]
Host: Linux-4.15.0-91-generic-x86_64-with-Ubuntu-18.04-bionic (Linux rtbf64a 4.15.0-91-generic #92-Ubuntu SMP Fri Feb 28 11:09:48 UTC 2020 x86_64 x86_64)
[ 1/591] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/591] p:9 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed Time: 0:00:01.040576 fsimfsgeneric01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] ../../../../../../rtems/c/src/../../testsuites/fstests/fsimfsgeneric01/init.c: 266 *state == TEST_NEW
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 16/591] p:9 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsjffs2gc01.exe
<<skipping passes>>
[ 18/591] p:10 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsrfsbitmap01.exe
Result: failed Time: 0:00:03.026130 fsrfsbitmap01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/fstests/fsrfsbitmap01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/fstests/fsrfsbitmap01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/fstests/fsrfsbitmap01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSRFSBITMAP 1
] *** BEGIN OF TEST FSRFSBITMAP 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Initializing filesystem RFS
] START of RFS Bitmap Unit Test
] Bit set value : 0
] Bit clear value : 1
] Num bit per element : 32
] RFS Bitmap Test : size = 4096 (128)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (4095): pass (Success): bit = 4095
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (4095): pass (Success)
] 7. Test bit 32 in range (1,4094] is set: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 3165: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 3165
] 11. Fail to find bit with seed = 0: pass (Success): bit = 2048
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (4095): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 4095
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (2048): pass (Success): bit = 0
] 18. Clear bit (size - 1) (4095): pass, (Success)
] 19. Find bit with seed = (size / 2) (2048): pass (Success): bit = 4095
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (2047): pass (Success): bit = 0
] 22. Clear bit (size - 1) (4095): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (2047): pass (Success): bit = 4095
] 23. Set all bits
] 23. Cleared bits (692, 723] (32)
] 23. Cleared bit still set: bit = 692
] RFS Bitmap Test : size = 2048 (64)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (2047): pass (Success): bit = 2047
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (2047): pass (Success)
] 7. Test bit 32 in range (1,2046] is set: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 1674: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 1674
] 11. Fail to find bit with seed = 0: pass (Success): bit = 0
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (2047): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 2047
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (1024): pass (Success): bit = 0
] 18. Clear bit (size - 1) (2047): pass, (Success)
] 19. Find bit with seed = (size / 2) (1024): pass (Success): bit = 2047
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (1023): pass (Success): bit = 0
] 22. Clear bit (size - 1) (2047): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (1023): pass (Success): bit = 2047
] 23. Set all bits
] 23. Cleared bits (650, 681] (32)
] 23. Cleared bit still set: bit = 672
] RFS Bitmap Test : size = 420 (14)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (419): pass (Success): bit = 419
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (419): pass (Success)
] 7. Test bit 32 in range (1,418] is set: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 359: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 359
] 11. Fail to find bit with seed = 0: pass (Success): bit = 0
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (419): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 419
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (210): pass (Success): bit = 0
] 18. Clear bit (size - 1) (419): pass, (Success)
] 19. Find bit with seed = (size / 2) (210): pass (Success): bit = 419
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (209): pass (Success): bit = 0
] 22. Clear bit (size - 1) (419): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (209): pass (Success): bit = 419
] 23. Set all bits
] 23. Cleared bits (126, 157] (32)
] 23. Cleared bit still set: bit = 126
] Testing bitmap_map functions with zero initialized bitmap control pointer
] Allocate most of memory - attempt to fail while open bitmap - expect ENOMEM
] assertion "_Chain_Is_node_off_chain( the_node )" failed: file "/home/joel/rtems-cron-5.0.0-m2005-1/rtems/cpukit/include/rtems/score/chainimpl.h", line 660, function: _Chain_Insert_unprotected
] *** FATAL ***
] fatal source: 7 (RTEMS_FATAL_SOURCE_ASSERT)
] fatal code: 341184 (0x000534c0)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 19/591] p:11 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: fsrofs01.exe
<<skipping passes>>
[ 70/591] p:61 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: block11.exe
Result: failed Time: 0:00:01.056115 block11.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/block11.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/block11.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/block11.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: BLOCK 11
] *** BEGIN OF TEST BLOCK 11 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] ../../../../../../rtems/c/src/../../testsuites/libtests/block11/init.c: 297 sc == RTEMS_NO_MEMORY
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 71/591] p:62 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: block12.exe
<<skipping passes>>
[ 81/591] p:71 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: crypt01.exe
Result: timeout Time: 0:03:03.543587 crypt01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/crypt01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/crypt01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/crypt01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: CRYPT 1
] *** BEGIN OF TEST CRYPT 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] test crypt_md5_r()
] test crypt_sha256_r()
] input: Hello world!
] salt: $5$saltstring
] expected: $5$saltstring$5B8vYYiY.CVt1RlTTf8KbXBH3hsxY/GNooZaBBGWEc5
] actual: $5$saltstring$5B8vYYiY.CVt1RlTTf8KbXBH3hsxY/GNooZaBBGWEc5
] input: Hello world!
] salt: $5$rounds=10000$saltstringsaltstring
] expected: $5$rounds=10000$saltstringsaltst$3xv.VbSHBb41AL9AvLeujZkZRBAwqFMz2.opqey6IcA
] actual: $5$rounds=10000$saltstringsaltst$3xv.VbSHBb41AL9AvLeujZkZRBAwqFMz2.opqey6IcA
] input: This is just a test
] salt: $5$rounds=5000$toolongsaltstring
] expected: $5$rounds=5000$toolongsaltstrin$Un/5jzAHMgOGZ5.mWJpuVolil07guHPvOW8mGRcvxa5
] actual: $5$rounds=5000$toolongsaltstrin$Un/5jzAHMgOGZ5.mWJpuVolil07guHPvOW8mGRcvxa5
] input: a very much longer text to encrypt. This one even stretches over morethan one line.
] salt: $5$rounds=1400$anotherlongsaltstring
] expected: $5$rounds=1400$anotherlongsalts$Rx.j8H.h8HjEDGomFU8bDkXm3XIUnzyxf12oP84Bnq1
] actual: $5$rounds=1400$anotherlongsalts$Rx.j8H.h8HjEDGomFU8bDkXm3XIUnzyxf12oP84Bnq1
] input: we have a short salt string but not a short password
] salt: $5$rounds=77777$short
] expected: $5$rounds=77777$short$JiO1O3ZpDAxGJeaDIuqCoEFysAe1mZNJRs3pw0KQRd/
] actual: $5$rounds=77777$short$JiO1O3ZpDAxGJeaDIuqCoEFysAe1mZNJRs3pw0KQRd/
] input: a short string
] salt: $5$rounds=123456$asaltof16chars..
] expected: $5$rounds=123456$asaltof16chars..$gP3VQ/6X7UUEW3HkBn2w1/Ptq2jxPyzV/cZKmF/wJvD
] actual: $5$rounds=123456$asaltof16chars..$gP3VQ/6X7UUEW3HkBn2w1/Ptq2jxPyzV/cZKmF/wJvD
] input: the minimum number is still observed
] salt: $5$rounds=10$roundstoolow
] expected: $5$rounds=1000$roundstoolow$yfvwcWrQ8l/K0DAWyuPMDNHpIVlTQebY9l/gL972bIC
] actual: $5$rounds=1000$roundstoolow$yfvwcWrQ8l/K0DAWyuPMDNHpIVlTQebY9l/gL972bIC
] test crypt_sha512_r()
] input: Hello world!
] salt: $6$saltstring
] expected: $6$saltstring$svn8UoSVapNtMuq1ukKS4tPQd8iKwSMHWjl/O817G3uBnIFNjnQJuesI68u4OTLiBFdcbYEdFCoEOfaS35inz1
] actual: $6$saltstring$svn8UoSVapNtMuq1ukKS4tPQd8iKwSMHWjl/O817G3uBnIFNjnQJuesI68u4OTLiBFdcbYEdFCoEOfaS35inz1
] input: Hello world!
] salt: $6$rounds=10000$saltstringsaltstring
] expected: $6$rounds=10000$saltstringsaltst$OW1/O6BYHV6BcXZu8QVeXbDWra3Oeqh0sbHbbMCVNSnCM/UrjmM0Dp8vOuZeHBy/YTBmSK6H9qs/y3RnOaw5v.
] actual: $6$rounds=10000$saltstringsaltst$OW1/O6BYHV6BcXZu8QVeXbDWra3Oeqh0sbHbbMCVNSnCM/UrjmM0Dp8vOuZeHBy/YTBmSK6H9qs/y3RnOaw5v.
] input: This is just a test
] salt: $6$rounds=5000$toolongsaltstring
] expected: $6$rounds=5000$toolongsaltstrin$lQ8jolhgVRVhY4b5pZKaysCLi0QBxGoNeKQzQ3glMhwllF7oGDZxUhx1yxdYcz/e1JSbq3y6JMxxl8audkUEm0
] actual: $6$rounds=5000$toolongsaltstrin$lQ8jolhgVRVhY4b5pZKaysCLi0QBxGoNeKQzQ3glMhwllF7oGDZxUhx1yxdYcz/e1JSbq3y6JMxxl8audkUEm0
] input: a very much longer text to encrypt. This one even stretches over morethan one line.
] salt: $6$rounds=1400$anotherlongsaltstring
] expected: $6$rounds=1400$anotherlongsalts$POfYwTEok97VWcjxIiSOjiykti.o/pQs.wPvMxQ6Fm7I6IoYN3CmLs66x9t0oSwbtEW7o7UmJEiDwGqd8p4ur1
] actual: $6$rounds=1400$anotherlongsalts$POfYwTEok97VWcjxIiSOjiykti.o/pQs.wPvMxQ6Fm7I6IoYN3CmLs66x9t0oSwbtEW7o7UmJEiDwGqd8p4ur1
] *** TIMEOUT TIMEOUT
[ 82/591] p:72 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: defaultconfig01.exe
<<skipping passes>>
[ 92/591] p:82 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed Time: 0:00:02.217262 dl06.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/dl06.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/dl06.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] load: /dl06.rap
] dlopen failed: (null)
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 93/591] p:82 f:4 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[ 95/591] p:84 f:4 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: dl09.exe
Result: failed Time: 0:00:31.278903 dl09.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/dl09.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/dl09.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/dl09.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 9
] *** BEGIN OF TEST libdl (RTL) 9 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0x778a8: unresolved externals
] handle: 0x778a8 loaded
] space alloc: /dl09-o1.o: 33554432: 0x2000028
] load: /dl09-o2.o
] handel: 0x79568: unresolved externals
] handle: 0x79568 loaded
] space alloc: /dl09-o2.o: 33554432: 0x4000050
] load: /dl09-o3.o
] handel: 0x7a5c8: unresolved externals
] handle: 0x7a5c8 loaded
] space alloc: /dl09-o3.o: 33554432: 0x6000078
] load: /dl09-o4.o
] handel: 0x7b378: unresolved externals
] handle: 0x7b378 loaded
] space alloc: /dl09-o4.o: 33554432: 0x80000a0
] load: /dl09-o5.o
] handel: 0x7c6f8: no unresolved externals
] handle: 0x7c6f8 loaded
] handel: 0x7c6f8: no unresolved externals
] Check is any unresolved externals exist:
] handel: 0xfffffffd: no unresolved externals
] Running rtems_main_o1:
] dlo1: module: testsuites/libtests/dl09/dl09-o1.c @ 0x78f88
] dlo1: dl01_bss1: 4: 0x56d38: 0
] dlo1: dl01_bss2: 4: 0x79380: %f
] dlo1: dl01_bss3: 1: 0x793f8: 00
] dlo1: dl01_data1: 4: 0x56d44: 1
] dlo1: dl01_data2: 4: 0x56d48: %f
] dlo1: dl01_const1: 4: 0x56d3c: 3
] dlo1: dl01_const2: 4: 0x56d40: %f
] dlo1: dl01_func1: 1: 0x78f80
] dlo1: rtems_main_o2: 0x7a120
] dlo2: module: testsuites/libtests/dl09/dl09-o2.c @ 0x7a120
] dlo2: dl02_bss1: 4: 0x56d4c: 0
] dlo2: dl02_bss2: 4: 0x7a400: %f
] dlo2: dl02_bss3: 1: 0x7a41c: 00
] dlo2: dl02_data1: 4: 0x56d54: 12345678
] dlo2: dl02_data2: 4: 0x56d50: %f
] dlo3: module: testsuites/libtests/dl09/dl09-o3.c : 0x7ae20
] dlo3: dl04_unresolv_1: 4: 0x56d5c: 12345
] dlo3: dl04_unresolv_2: 4: 0x56d58: %f
] dlo3: dl04_unresolv_3: 1: 0x56d60: 7a
] dlo3: dl04_unresolv_4: 4: 0x56d64: 0x7c4dc
] dlo3: dl04_unresolv_5: 4: 0x56d68: 4
] dlo3: dl04_unresolv_6: 4: 0x56d6c: dl-O4
] dlo3: dl05_unresolv_1: 8: 0x56d70: 0
] dlo3: dl05_unresolv_2: 2: 0x56d78: 0
] dlo3: dl05_unresolv_3: 4: 0x56d7c: 0
] dlo3: dl05_unresolv_4: 1: 0x56d80: 0
] dlo3: dl05_unresolv_5: 8: 0x56d84: 0
] dlo4: module: testsuites/libtests/dl09/dl09-o4.c @ 0x7c240
] dlo4: dl04_unresolv_1: 4: 0x56d5c: 12345
] dlo4: dl04_unresolv_2: 4: 0x56d58: %f
] dlo4: dl04_unresolv_3: 1: 0x56d60: 7a
] dlo4: dl04_unresolv_4: 4: 0x56d64: aBcDeF
] dlo4: dl04_unresolv_5: 4: 0x56d68: 4
] dlo4: dl04_unresolv_6: 4: 0x56d6c: dl-O4
] dlo5: module: testsuites/libtests/dl09/dl09-o5.c @ 0x7d328
] dlo5: dl05_unresolv_1: 8: 0x56d70: 0
] dlo5: dl05_unresolv_2: 2: 0x56d78: 0
] dlo5: dl05_unresolv_3: 4: 0x56d7c: 0
] dlo5: dl05_unresolv_4: 1: 0x56d80: 0
] dlo5: dl05_unresolv_5: 8: 0x56d84: 0
] handle: 0x778a8 closing
] space dealloc: 0x2000028
] handle: 0x79568 closing
] space dealloc: 0x4000050
] handle: 0x7a5c8 closing
] space dealloc: 0x6000078
] handle: 0x7b378 closing
] space dealloc: 0x80000a0
] handle: 0x7c6f8 closing
] space dealloc: 0
] --------------------------------------------------
] Run: 1
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0x7d738: unresolved externals
] handle: 0x7d738 loaded
] space alloc: /dl09-o1.o: 33554432: 0x2000028
] load: /dl09-o2.o
] handel: 0x7a710: unresolved externals
] handle: 0x7a710 loaded
] space alloc: /dl09-o2.o: 33554432: 0x4000990
] load: /dl09-o3.o
] handel: 0x7b4c0: unresolved externals
] handle: 0x7b4c0 loaded
] space alloc: /dl09-o3.o: 33554432: 0x60009b8
] load: /dl09-o4.o
] handel: 0x7c870: unresolved externals
] handle: 0x7c870 loaded
] space alloc: /dl09-o4.o: 33554432: 0x8000cc0
] load: /dl09-o5.o
] handel: 0xa000ce8: no unresolved externals
] handle: 0xa000ce8 loaded
] handel: 0xa000ce8: no unresolved externals
] Check is any unresolved externals exist:
] handel: 0xfffffffd: no unresolved externals
] Running rtems_main_o1:
] dlo1: module: testsuites/libtests/dl09/dl09-o1.c @ 0x7e5f0
] dlo1: dl01_bss1: 4: 0x56d38: 0
] dlo1: dl01_bss2: 4: 0x7e9e8: %f
] dlo1: dl01_bss3: 1: 0x7ea60: 00
] dlo1: dl01_data1: 4: 0x56d44: 1
] dlo1: dl01_data2: 4: 0x56d48: %f
] dlo1: dl01_const1: 4: 0x56d3c: 3
] dlo1: dl01_const2: 4: 0x56d40: %f
] dlo1: dl01_func1: 1: 0x7e5e8
] dlo1: rtems_main_o2: 0x4000488
] dlo2: module: testsuites/libtests/dl09/dl09-o2.c @ 0x4000488
] dlo2: dl02_bss1: 4: 0x56d4c: 0
] dlo2: dl02_bss2: 4: 0x4000768: %f
] dlo2: dl02_bss3: 1: 0x4000784: 00
] dlo2: dl02_data1: 4: 0x56d54: 12345678
] dlo2: dl02_data2: 4: 0x56d50: %f
] dlo3: module: testsuites/libtests/dl09/dl09-o3.c : 0x7bd18
] dlo3: dl04_unresolv_1: 4: 0x56d5c: 12345
] dlo3: dl04_unresolv_2: 4: 0x56d58: %f
] dlo3: dl04_unresolv_3: 1: 0x56d60: 7a
] dlo3: dl04_unresolv_4: 4: 0x56d64: 0x8000b3c
] dlo3: dl04_unresolv_5: 4: 0x56d68: 4
] dlo3: dl04_unresolv_6: 4: 0x56d6c: dl-O4
] dlo3: dl05_unresolv_1: 8: 0x56d70: 0
] dlo3: dl05_unresolv_2: 2: 0x56d78: 0
] dlo3: dl05_unresolv_3: 4: 0x56d7c: 0
] dlo3: dl05_unresolv_4: 1: 0x56d80: 0
] dlo3: dl05_unresolv_5: 8: 0x56d84: 0
] dlo4: module: testsuites/libtests/dl09/dl09-o4.c @ 0x7ac38
] dlo4: dl04_unresolv_1: 4: 0x56d5c: 12345
] dlo4: dl04_unresolv_2: 4: 0x56d58: %f
] dlo4: dl04_unresolv_3: 1: 0x56d60: 7a
] dlo4: dl04_unresolv_4: 4: 0x56d64: aBcDeF
] dlo4: dl04_unresolv_5: 4: 0x56d68: 4
] dlo4: dl04_unresolv_6: 4: 0x56d6c: dl-O4
] dlo5: module: testsuites/libtests/dl09/dl09-o5.c @ 0xa0018e8
] dlo5: dl05_unresolv_1: 8: 0x56d70: 0
] dlo5: dl05_unresolv_2: 2: 0x56d78: 0
] dlo5: dl05_unresolv_3: 4: 0x56d7c: 0
] dlo5: dl05_unresolv_4: 1: 0x56d80: 0
] dlo5: dl05_unresolv_5: 8: 0x56d84: 0
] handle: 0x7d738 closing
] space dealloc: 0x2000028
] handle: 0x7a710 closing
] space dealloc: 0x4000990
] handle: 0x7b4c0 closing
] space dealloc: 0x60009b8
] handle: 0x7c870 closing
] space dealloc: 0x8000cc0
] handle: 0xa000ce8 closing
] space dealloc: 0
] --------------------------------------------------
] Run: 2
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0xa001d80: unresolved externals
] handle: 0xa001d80 loaded
] space alloc: /dl09-o1.o: 33554432: 0x2000028
] load: /dl09-o2.o
] handel: 0x7a828: unresolved externals
] handle: 0x7a828 loaded
] space alloc: /dl09-o2.o: 33554432: 0x4000990
] load: /dl09-o3.o
] handel: 0x7b3a8: unresolved externals
] handle: 0x7b3a8 loaded
] space alloc: /dl09-o3.o: 33554432: 0x60009b8
] load: /dl09-o4.o
] handel: 0x7cc38: unresolved externals
] handle: 0x7cc38 loaded
] space alloc: /dl09-o4.o: 33554432: 0x8000cc0
] load: /dl09-o5.o
] handel: 0xa000e30: no unresolved externals
] handle: 0xa000e30 loaded
] handel: 0xa000e30: no unresolved externals
] Check is any unresolved externals exist:
] handel: 0xfffffffd: no unresolved externals
] Running rtems_main_o1:
] dlo1: module: testsuites/libtests/dl09/dl09-o1.c @ 0xa002c38
] dlo1: dl01_bss1: 4: 0x56d38: 0
] dlo1: dl01_bss2: 4: 0xa003030: %f
] dlo1: dl01_bss3: 1: 0xa0030a8: 00
] dlo1: dl01_data1: 4: 0x56d44: 1
] dlo1: dl01_data2: 4: 0x56d48: %f
] dlo1: dl01_const1: 4: 0x56d3c: 3
] dlo1: dl01_const2: 4: 0x56d40: %f
] dlo1: dl01_func1: 1: 0xa002c30
] dlo1: rtems_main_o2: 0x40004e8
] dlo2: module: testsuites/libtests/dl09/dl09-o2.c @ 0x40004e8
] dlo2: dl02_bss1: 4: 0x56d4c: 0
] dlo2: dl02_bss2: 4: 0x40007c8: %f
] dlo2: dl02_bss3: 1: 0x40007e4: 00
] dlo2: dl02_data1: 4: 0x56d54: 12345678
] dlo2: dl02_data2: 4: 0x56d50: %f
] dlo3: module: testsuites/libtests/dl09/dl09-o3.c : 0x7bc00
] dlo3: dl04_unresolv_1: 4: 0x56d5c: 12345
] dlo3: dl04_unresolv_2: 4: 0x56d58: %f
] dlo3: dl04_unresolv_3: 1: 0x56d60: 7a
] dlo3: dl04_unresolv_4: 4: 0x56d64: 0x7c0ec
] dlo3: dl04_unresolv_5: 4: 0x56d68: 4
] dlo3: dl04_unresolv_6: 4: 0x56d6c: dl-O4
] dlo3: dl05_unresolv_1: 8: 0x56d70: 0
] dlo3: dl05_unresolv_2: 2: 0x56d78: 0
] dlo3: dl05_unresolv_3: 4: 0x56d7c: 0
] dlo3: dl05_unresolv_4: 1: 0x56d80: 0
] dlo3: dl05_unresolv_5: 8: 0x56d84: 0
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
] exception vector 7 (0x7)
] next PC or address of fault = 0x0807d778
] saved MSR = 0x0008a072
] context = task, ISR nest level = 0
] thread dispatch disable level = 0
] R0 = 0x0007bda4 R1 = 0x0006eea8 R2 = 0x00000000 R3 = 0x00056c44
] R4 = 0x0007bfd8 R5 = 0x0007bfb4 R6 = 0x080009e0 R7 = 0x0007cbdd
] R8 = 0x0007cbdc R9 = 0x00025f30 R10 = 0x00000020 R11 = 0x00000000
] R12 = 0x080009e0 R13 = 0x0005eba8 R14 = 0x00000000 R15 = 0x00000000
] R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00030000 R19 = 0x0002f7d8
] R20 = 0x0002f7ec R21 = 0x0002f758 R22 = 0x0002f814 R23 = 0x00030000
] R24 = 0x00030000 R25 = 0x0002f7cc R26 = 0x0006ef2c R27 = 0x0006ef2c
] R28 = 0x0a000e30 R29 = 0x00030000 R30 = 0x00030000 R31 = 0x00056c44
] CR = 0x20000242
] CTR = 0x080009e0
] XER = 0x20000000
] LR = 0x08000a18
] DAR = 0x00000000
] executing thread ID = 0x0a010001, name = UI1
] Stack Trace:
] IP: 0x0807d778, LR: 0x08000a18
] --^ 0x0007bda4--^ 0x040005cc--^ 0x0a002d9c--^ 0x00000628--^ 0x000002c0
] --^ 0x0000c778--^ 0x0000c674
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[ 96/591] p:85 f:4 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: dl10.exe
<<skipping passes>>
[121/591] p:108 f:4 u:2 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: rbheap01.exe
Result: failed Time: 0:00:01.020126 rbheap01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/rbheap01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/rbheap01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/rbheap01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: RBHEAP 1
] *** BEGIN OF TEST RBHEAP 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] ../../../../../../rtems/c/src/../../testsuites/libtests/rbheap01/init.c: 375 p == NULL
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[122/591] p:109 f:4 u:2 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: record01.exe
<<skipping passes>>
[136/591] p:121 f:6 u:2 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: termios01.exe
Result: failed Time: 0:00:02.031332 termios01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/libtests/termios01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/libtests/termios01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/libtests/termios01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TERMIOS 1
] *** BEGIN OF TEST TERMIOS 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Test termios_baud2index...
] termios_baud_to_index(-2) - NOT OK
] termios_baud_to_index(B0) - OK
] termios_baud_to_index(B50) - OK
] termios_baud_to_index(B75) - OK
] termios_baud_to_index(B110) - OK
] termios_baud_to_index(B134) - OK
] termios_baud_to_index(B150) - OK
] termios_baud_to_index(B200) - OK
] termios_baud_to_index(B300) - OK
] termios_baud_to_index(B600) - OK
] termios_baud_to_index(B1200) - OK
] termios_baud_to_index(B1800) - OK
] termios_baud_to_index(B2400) - OK
] termios_baud_to_index(B4800) - OK
] termios_baud_to_index(B9600) - OK
] termios_baud_to_index(B19200) - OK
] termios_baud_to_index(B38400) - OK
] termios_baud_to_index(B7200) - OK
] termios_baud_to_index(B14400) - OK
] termios_baud_to_index(B28800) - OK
] termios_baud_to_index(B57600) - OK
] termios_baud_to_index(B76800) - OK
] termios_baud_to_index(B115200) - OK
] termios_baud_to_index(B230400) - OK
] termios_baud_to_index(B460800) - OK
] termios_baud_to_index(B921600) - OK
] Test termios_baud2number...
] termios_baud_to_number(-2) - NOT OK
] termios_baud_to_number(B0) - OK
] termios_baud_to_number(B50) - OK
] termios_baud_to_number(B75) - OK
] termios_baud_to_number(B110) - OK
] termios_baud_to_number(B134) - OK
] termios_baud_to_number(B150) - OK
] termios_baud_to_number(B200) - OK
] termios_baud_to_number(B300) - OK
] termios_baud_to_number(B600) - OK
] termios_baud_to_number(B1200) - OK
] termios_baud_to_number(B1800) - OK
] termios_baud_to_number(B2400) - OK
] termios_baud_to_number(B4800) - OK
] termios_baud_to_number(B9600) - OK
] termios_baud_to_number(B19200) - OK
] termios_baud_to_number(B38400) - OK
] termios_baud_to_number(B7200) - OK
] termios_baud_to_number(B14400) - OK
] termios_baud_to_number(B28800) - OK
] termios_baud_to_number(B57600) - OK
] termios_baud_to_number(B76800) - OK
] termios_baud_to_number(B115200) - OK
] termios_baud_to_number(B230400) - OK
] termios_baud_to_number(B460800) - OK
] termios_baud_to_number(B921600) - OK
] Test termios_number_to_baud...
] termios_number_to_baud(-2) - NOT OK
] termios_number_to_baud(B0) - OK
] termios_number_to_baud(B50) - OK
] termios_number_to_baud(B75) - OK
] termios_number_to_baud(B110) - OK
] termios_number_to_baud(B134) - OK
] termios_number_to_baud(B150) - OK
] termios_number_to_baud(B200) - OK
] termios_number_to_baud(B300) - OK
] termios_number_to_baud(B600) - OK
] termios_number_to_baud(B1200) - OK
] termios_number_to_baud(B1800) - OK
] termios_number_to_baud(B2400) - OK
] termios_number_to_baud(B4800) - OK
] termios_number_to_baud(B9600) - OK
] termios_number_to_baud(B19200) - OK
] termios_number_to_baud(B38400) - OK
] termios_number_to_baud(B7200) - OK
] termios_number_to_baud(B14400) - OK
] termios_number_to_baud(B28800) - OK
] termios_number_to_baud(B57600) - OK
] termios_number_to_baud(B76800) - OK
] termios_number_to_baud(B115200) - OK
] termios_number_to_baud(B230400) - OK
] termios_number_to_baud(B460800) - OK
] termios_number_to_baud(B921600) - OK
] Init - rtems_io_register_driver - Termios Test Driver - OK
] Termios_test_driver - rtems_io_register /dev/test - OK
] Init - Major slot returned = 1
] Init - open - /dev/test - OK
] ../../../../../../rtems/c/src/../../testsuites/libtests/termios01/termios_testdriver.c: 200 sc == RTEMS_NO_MEMORY
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[137/591] p:122 f:6 u:2 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: termios02.exe
<<skipping passes>>
[163/591] p:145 f:7 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed Time: 0:00:02.015572 psx12.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psx12.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 96ms
] [0] L 196ms
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psx12/init.c: 224 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 071]
[164/591] p:146 f:7 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[177/591] p:158 f:8 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxchroot01.exe
Result: failed Time: 0:00:01.042074 psxchroot01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psxchroot01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psxchroot01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psxchroot01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXCHROOT 1
] *** BEGIN OF TEST PSXCHROOT 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] chroot with bad path - expect ENOENT
] chroot with file - expect ENOTDIR
] allocate most of memory - attempt to fail chroot - expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psxchroot01/test.c: 126 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[178/591] p:158 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxclassic01.exe
<<skipping passes>>
[195/591] p:176 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxfenv01.exe
Result: failed Time: 0:00:02.089360 psxfenv01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psxfenv01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psxfenv01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psxfenv01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXFENV 01
] *** BEGIN OF TEST PSXFENV 01 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] fesetenv(FE_DFL_ENV).
] fesetenv ==> -134
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psxfenv01/init.c: 74 r == 0
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[196/591] p:176 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxfile01.exe
<<skipping passes>>
[205/591] p:185 f:10 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psximfs02.exe
Result: failed Time: 0:00:02.035358 psximfs02.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psximfs02.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psximfs02.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psximfs02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXIMFS 2
] *** BEGIN OF TEST PSXIMFS 2 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Creating directory /dir00
] Creating directory /dir00/dir01
] Changing directory to /dir00
] Creating link dir01-link0 for dir01
] Creating link dir01-link0001 for dir01-link0000
] Link creation failed
] Creating a regular node /node, RDONLY
] Creating link /node-link for /node
] Opening /node-link in WRONLY mode -- expect EACCES
] Creating a symlink /node-slink for /node
] Opening /node-slink in WRONLY mode -- expect EACCES
] Allocate most of heap
] Attempt to mount a fs at dir01 -- expect ENOMEM../../../../../../rtems/c/src/../../testsuites/psxtests/psximfs02/init.c: 114 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[206/591] p:185 f:10 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxintrcritical01.exe
<<skipping passes>>
[231/591] p:209 f:11 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxpipe01.exe
Result: failed Time: 0:00:02.061102 psxpipe01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/psxtests/psxpipe01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/psxtests/psxpipe01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/psxtests/psxpipe01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXPIPE 1
] *** BEGIN OF TEST PSXPIPE 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Init - attempt to create pipe -- expect EFAULT
] Init - create pipe -- OK
] Init - create pipe -- OK
] Init - attempt to create pipe -- expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/psxtests/psxpipe01/init.c: 66 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[232/591] p:211 f:11 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | powerpc/psim: psxrdwrv.exe
<<skipping passes>>
[433/591] p:408 f:12 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spextensions01.exe
Result: failed Time: 0:00:02.068540 spextensions01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spextensions01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spextensions01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spextensions01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPEXTENSIONS 1
] *** BEGIN OF TEST SPEXTENSIONS 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] assertion "sc == RTEMS_UNSATISFIED" failed: file "../../../../../../rtems/c/src/../../testsuites/sptests/spextensions01/init.c", line 504, function: test
] *** FATAL ***
] fatal source: 7 (RTEMS_FATAL_SOURCE_ASSERT)
] fatal code: 217448 (0x00035168)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[434/591] p:408 f:12 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfatal01.exe
<<skipping passes>>
[452/591] p:425 f:13 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfatal31.exe
Result: failed Time: 0:00:02.078595 spfatal31.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spfatal31.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spfatal31.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spfatal31.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFATAL 31
] *** BEGIN OF TEST SPFATAL 31 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
] exception vector 8 (0x8)
] next PC or address of fault = 0x00000248
] saved MSR = 0x00000042
] context = interrupt, ISR nest level = 1
] thread dispatch disable level = 1
] R0 = 0x00013334 R1 = 0x000308a8 R2 = 0x00000000 R3 = 0x12010001
] R4 = 0x00000000 R5 = 0x00000001 R6 = 0x00000001 R7 = 0x00000000
] R8 = 0x00000001 R9 = 0x00010000 R10 = 0x00000001 R11 = 0x00000000
] R12 = 0x0000d5e6 R13 = 0x00022a50 R14 = 0x0002e890 R15 = 0x00000000
] R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
] R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
] R24 = 0x00000000 R25 = 0x00000000 R26 = 0x00000001 R27 = 0x00000002
] R28 = 0x000308e0 R29 = 0x00000000 R30 = 0x0002c510 R31 = 0x0002c020
] CR = 0x40840404
] CTR = 0x00000244
] XER = 0x00000000
] LR = 0x00013258
] DAR = 0x00000000
] executing thread ID = 0x09010001, name = IDLE
] Stack Trace:
] IP: 0x00000248, LR: 0x00013258
] --^ 0x00013334--^ 0x000105e0--^ 0x00000530--^ 0x0000073c--^ 0x0000499c
] --^ 0x00003e50
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x089010001
] executing thread name: IDLE
=> [Inferior 1 (process 42000) exited with code 075]
[453/591] p:428 f:14 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfatal32.exe
<<skipping passes>>
[455/591] p:428 f:14 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfifo02.exe
Result: failed Time: 0:00:02.076288 spfifo02.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spfifo02.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spfifo02.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spfifo02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFIFO 2
] *** BEGIN OF TEST SPFIFO 2 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Creating FIFO
] Opening FIFO.. expect ENOMEM since no memory is available
] expect status=3 errno=0/(Success)
] ../../../../../../rtems/c/src/../../testsuites/sptests/spfifo02/init.c: 43 fd == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[456/591] p:428 f:14 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spfifo03.exe
<<skipping passes>>
[491/591] p:462 f:15 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spmountmgr01.exe
Result: failed Time: 0:00:01.079035 spmountmgr01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spmountmgr01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spmountmgr01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spmountmgr01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPMOUNTMGR 1
] *** BEGIN OF TEST SPMOUNTMGR 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Init - allocating most of heap -- OK
] Init - attempt to register filesystem fs - expect ENOMEM
] ../../../../../../rtems/c/src/../../testsuites/sptests/spmountmgr01/init.c: 52 status == -1
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[492/591] p:463 f:15 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spmrsp01.exe
<<skipping passes>>
[503/591] p:473 f:16 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spprivenv01.exe
Result: failed Time: 0:00:01.070638 spprivenv01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spprivenv01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spprivenv01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spprivenv01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPPRIVENV 1
] *** BEGIN OF TEST SPPRIVENV 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] Init - allocating most of heap -- OK
] Init - attempt to reset env - expect RTEMS_NO_MEMORY
] ../../../../../../rtems/c/src/../../testsuites/sptests/spprivenv01/init.c: 59 sc == RTEMS_NO_MEMORY
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[504/591] p:473 f:17 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spprofiling01.exe
<<skipping passes>>
[522/591] p:492 f:17 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spstdthreads01.exe
Result: failed Time: 0:00:02.066841 spstdthreads01.exe
=> gdb: /home/joel/rtems-cron-5.0.0-m2005-1/tools/5/bin/powerpc-rtems5-gdb -i=mi --nx --quiet ./powerpc-rtems5/c/psim/testsuites/sptests/spstdthreads01.exe
=> Reading symbols from ./powerpc-rtems5/c/psim/testsuites/sptests/spstdthreads01.exe...
=> target sim -f /home/joel/rtems-cron-5.0.0-m2005-1/rtems-tools/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/joel/rtems-cron-5.0.0-m2005-1/b-psim/powerpc-rtems5/c/psim/testsuites/sptests/spstdthreads01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPSTDTHREADS 1
] *** BEGIN OF TEST SPSTDTHREADS 1 ***
] *** TEST VERSION: 5.0.0-m2005-1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] ../../../../../../rtems/c/src/../../testsuites/sptests/spstdthreads01/init.c: 273 status == thrd_nomem
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0-m2005-1
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.0.0-m2005-1, Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 075]
[523/591] p:492 f:17 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: spstkalloc.exe
<<skipping passes>>
[591/591] p:559 f:18 u:6 e:0 I:0 B:3 t:1 i:0 W:0 | powerpc/psim: tmtimer01.exe
Passed: 563
Failed: 18
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 1
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 591
Failures:
fsimfsgeneric01.exe
fsrfsbitmap01.exe
block11.exe
dl06.exe
dl09.exe
rbheap01.exe
termios01.exe
psx12.exe
psxchroot01.exe
psxfenv01.exe
psximfs02.exe
psxpipe01.exe
spextensions01.exe
spfatal31.exe
spfifo02.exe
spmountmgr01.exe
spprivenv01.exe
spstdthreads01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
linpack.exe
dhrystone.exe
whetstone.exe
Timeouts:
crypt01.exe
Average test time: 0:00:00.813268
Testing time : 0:08:00.641498
More information about the build
mailing list