[rtems-test] arm/xilinx_zynq_zedboard: RTEMS_POSIX_API: Passed:573 Failed:0 Timeout:0 Invalid:5 Wrong:0

chrisj at rtems.org chrisj at rtems.org
Wed May 6 12:20:53 UTC 2020


Testing time     : 2:11:13.515096
Average test time: 0:00:13.299857

Host
====
FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)

Configuration
=============
Version: 5.0.0.084ea83a9be60ea14a9e59bdcd7eda086f9b8725
Build  : RTEMS_POSIX_API
Tools  : 7.5.0 20191114 (RTEMS 5, RSB 5 (8223d3b7c02e), Newlib 7947581)

Summary
=======

Passed:        573
Failed:          0
User Input:      6
Expected Fail:   5
Indeterminate:   0
Benchmark:       3
Timeout:         0
Invalid:         5
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
------------------
Total:         592

User Input:
 dl10.exe
 monitor.exe
 termios.exe
 top.exe
 capture.exe
 fileio.exe
Expected Fail:
 dl06.exe
 ttest01.exe
 psxfenv01.exe
 spconsole01.exe
 spcpucounter01.exe
Benchmark:
 dhrystone.exe
 linpack.exe
 whetstone.exe
Invalid:
 spfatal09.exe
 spfatal12.exe
 spinternalerror01.exe
 spsysinit01.exe
 sptimecounter01.exe
Log
===

RTEMS Testing - Tester, 5.0.not_released
 Command Line: /opt/work/rtems/5/bin/rtems-test --rtems-bsp=xilinx_zynq_zedboard --mail --from=chrisj at rtems.org --mail-to=build at rtems.org --log=zed.txt .
 Host: FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64
 Python: 3.7.6 (default, Mar  3 2020, 01:18:14) [Clang 8.0.1 (tags/RELEASE_801/final 366581)]
Host: FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
[  1/592] p:0   f:0   u:0   e:0   I:0   B:0   t:0   i:0   W:0   | arm/xilinx_zynq_zedboard: dhrystone.exe
 <<skipping passes>>
[441/592] p:426 f:0   u:6   e:5   I:0   B:3   t:0   i:0   W:0   | arm/xilinx_zynq_zedboard: spfatal09.exe
Result: invalid    Time: 0:00:07.902026 spfatal09.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal09.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal09.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal09.exe
=>   Image Name:   RTEMS
=>   Created:      Wed May  6 21:51:42 2020
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    32416 Bytes = 31.66 KiB = 0.03 MiB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal09.exe.img
] Loading: *###
] 	 960.9 KiB/s
] done
] Bytes transferred = 32480 (7ee0 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    32416 Bytes = 31.7 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8	
] **<5
] 9T61
] 9D#%
] 06"7V*	 2*I
]  B
] c>
] C )<L721(B
] c at 25(26&J,(,%&/($
] 0!"3+, k(*
] *(*
] *a!
] ,6%08)|A$HH!5a!
] ,I 6 %PA
] |A$H
] |H
] H!5!(L5
] 9T61
] 9D#%
] 06"7V!(L721(B
] c at 25(26&J,(	T4)$a(
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: re-requesting exe; target must have reset
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[442/592] p:426 f:0   u:6   e:5   I:0   B:3   t:0   i:1   W:0   | arm/xilinx_zynq_zedboard: spfatal10.exe
 <<skipping passes>>
[444/592] p:428 f:0   u:6   e:5   I:0   B:3   t:0   i:1   W:0   | arm/xilinx_zynq_zedboard: spfatal12.exe
Result: invalid    Time: 0:00:07.455830 spfatal12.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal12.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal12.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal12.exe
=>   Image Name:   RTEMS
=>   Created:      Wed May  6 21:52:04 2020
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    32422 Bytes = 31.66 KiB = 0.03 MiB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spfatal12.exe.img
] Loading: *###
] 	 1022.5 KiB/s
] done
] Bytes transferred = 32486 (7ee6 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    32422 Bytes = 31.7 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8	
] L (*<5
] 9T61
] 9D#%
] 06"7V*	 2*I
]  B
] c>
] C )<L721(B
] c at 25(26&J,(,%&/)K!W 
] ))))K!C4*
] L (C4*
] *a!
] ,6%08)|A$HH!5a!
] ,I 8)|A$H(<(.H1 `5!(L5
] 9T61
] 9D#%
] 06"7V!(L721(B
] c at 25(26&J,(	T4)$a(
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=>  tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[445/592] p:428 f:0   u:6   e:5   I:0   B:3   t:0   i:2   W:0   | arm/xilinx_zynq_zedboard: spfatal14.exe
 <<skipping passes>>
[464/592] p:447 f:0   u:6   e:5   I:0   B:3   t:0   i:2   W:0   | arm/xilinx_zynq_zedboard: spinternalerror01.exe
Result: invalid    Time: 0:00:06.896730 spinternalerror01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed May  6 21:54:37 2020
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    13706 Bytes = 13.38 KiB = 0.01 MiB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe.img
] DHCP client bound to address 10.10.5.144 (9 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#
] 	 537.1 KiB/s
] done
] Bytes transferred = 13770 (35ca hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    13706 Bytes = 13.4 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8	PA
] "
] 1**<5
] 9T61
] 9D#%
] 06"7V*	 2*I
]  B
] c>
] C )<L721(B
] c at 25(26&J,(CpPA
] "
] 1*(*
] *a!
] ,6%93v (
] ,I`5f 60205!(L5
] 9T61
] 9D#%
] 06"7V!(L721(B
] c at 25(26&J,(	T4)$a(
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (9 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: re-requesting exe; target must have reset
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[465/592] p:447 f:0   u:6   e:5   I:0   B:3   t:0   i:3   W:0   | arm/xilinx_zynq_zedboard: spinternalerror02.exe
 <<skipping passes>>
[526/592] p:508 f:0   u:6   e:5   I:0   B:3   t:0   i:3   W:0   | arm/xilinx_zynq_zedboard: spsysinit01.exe
Result: invalid    Time: 0:00:07.419745 spsysinit01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed May  6 22:10:52 2020
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    44846 Bytes = 43.79 KiB = 0.04 MiB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe.img
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 	 1.3 MiB/s
] done
] Bytes transferred = 44910 (af6e hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    44846 Bytes = 43.8 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] S::)513
] I:002(:j/
]  ::)00250=014(:HHF zj:">B:(:j/
]  :&V%:)00296	=01&1H1 `(:j/
]  :&V%:)012000	=000001
] < zjHHHII	
] %9OF TEST SPSYSINIT 1 ***
] *** TEST VERSION: 5.0.0.084ea83a9be60ea14a9e59bdcd7eda086f9b8725
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (8223d3b7c02e), Newlib 7947581)
] sysinit: BSP_START: done
] sysinit: CPU_COUNTER: done
] sysinit: INITIAL_EXTENSIONS: done
] sysinit: DATA_STRUCTURES: done
] sysinit: USER_EXTENSIONS: done
] sysinit: CLASSIC_TASKS: done
] sysinit: CLASSIC_TIMER: done
] sysinit: CLASSIC_MESSAGE_QUEUE: done
] sysinit: CLASSIC_SEMAPHORE: done
] sysinit: CLASSIC_PARTITION: done
] sysinit: CLASSIC_REGION: done
] sysinit: CLASSIC_DUAL_PORTED_MEMORY: done
] sysinit: CLASSIC_RATE_MONOTONIC: done
] sysinit: CLASSIC_BARRIER: done
] sysinit: POSIX_SIGNALS: done
] sysinit: POSIX_THREADS: done
] sysinit: POSIX_MESSAGE_QUEUE: done
] sysinit: POSIX_SEMAPHORE: done
] sysinit: POSIX_TIMER: done
] sysinit: POSIX_SHM: done
] sysinit: POSIX_KEYS: done
] sysinit: POSIX_CLEANUP: done
] sysinit: IDLE_THREADS: done
] sysinit: LIBIO: done
] sysinit: USER_ENVIRONMENT: done
] sysinit: ROOT_FILESYSTEM: done
] sysinit: BSP_PRE_DRIVERS: done
] sysinit: DEVICE_DRIVERS: done
] sysinit: CLASSIC_USER_TASKS: done
] sysinit: POSIX_USER_THREADS: done
] sysinit: STD_FILE_DESCRIPTORS: done
] sysinit: done
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spsysinit01/init.c: 923 rv == 0
] 
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.084ea83a9be60ea14a9e59bdcd7eda086f9b8725
] RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5 (8223d3b7c02e), Newlib 7947581)
] executing thread ID: 0x08a010001
] executing thread name: UI1 
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
=>  tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.140 (9 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[527/592] p:508 f:0   u:6   e:5   I:0   B:3   t:0   i:4   W:0   | arm/xilinx_zynq_zedboard: spsyslock01.exe
 <<skipping passes>>
[536/592] p:517 f:0   u:6   e:5   I:0   B:3   t:0   i:4   W:0   | arm/xilinx_zynq_zedboard: sptimecounter01.exe
Result: invalid    Time: 0:00:07.971288 sptimecounter01.exe
=>  target exe filter: find:\.exe subst:.exe.img -> ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe.img
=>  target pretest: rtems-zynq-mkimg ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe
=>   Image: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe
=>   Image Name:   RTEMS
=>   Created:      Wed May  6 22:12:23 2020
=>   Image Type:   ARM RTEMS Kernel Image (gzip compressed)
=>   Data Size:    23291 Bytes = 22.75 KiB = 0.02 MiB
=>   Load Address: 00104000
=>   Entry Point:  00104000
] .... done
] BOOTP broadcast 1
=>  tftp: ./arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 	 786.1 KiB/s
] done
] Bytes transferred = 23355 (5b3b hex)
] ## Booting kernel from Legacy Image at 02000000 ...
]    Image Name:   RTEMS
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    23291 Bytes = 22.7 KiB
]    Load Address: 00104000
]    Entry Point:  00104000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8	(PA@
] **<5
] 9T61
] 9D#%
] 06"7V*	 2*I
]  B
] c>
] C )<L721(B
] c at 25(26&J,(*(PA@
] *(*
] *a!
] ,6%5(B
] c>&T2
] Ia!
] ,I  0000(B
] c at +/5
] 9T61
] 9D#%
] 06"7V!(L721(B
] c at 25(26&J,(	T4)$a(
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
=>  tftp: re-requesting exe; target must have reset
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] 
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
] 
] 
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
] 
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM:  ECC disabled 512 MiB
] MMC:   sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
] 
] In:    serial at e0001000
] Out:   serial at e0001000
] Err:   serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
] 
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[537/592] p:517 f:0   u:6   e:5   I:0   B:3   t:0   i:5   W:0   | arm/xilinx_zynq_zedboard: sptimecounter02.exe
 <<skipping passes>>
[592/592] p:572 f:0   u:6   e:5   I:0   B:3   t:0   i:5   W:0   | arm/xilinx_zynq_zedboard: tmtimer01.exe

Passed:        573
Failed:          0
User Input:      6
Expected Fail:   5
Indeterminate:   0
Benchmark:       3
Timeout:         0
Invalid:         5
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
------------------
Total:         592
User Input:
 dl10.exe
 monitor.exe
 termios.exe
 top.exe
 capture.exe
 fileio.exe
Expected Fail:
 dl06.exe
 ttest01.exe
 psxfenv01.exe
 spconsole01.exe
 spcpucounter01.exe
Benchmark:
 dhrystone.exe
 linpack.exe
 whetstone.exe
Invalid:
 spfatal09.exe
 spfatal12.exe
 spinternalerror01.exe
 spsysinit01.exe
 sptimecounter01.exe
Average test time: 0:00:13.299857
Testing time     : 2:11:13.515096


More information about the build mailing list