Build Darwin: PASSED 6/rtems-riscv on x86_64-apple-darwin20.1.0
chrisj at rtems.org
chrisj at rtems.org
Fri Jan 15 16:32:29 UTC 2021
RTEMS Source Builder - Set Builder, 6 (295f9e94b9f0)
Host: Darwin-20.1.0-x86_64-i386-64bit
Darwin mohua 20.1.0 Darwin Kernel Version 20.1.0: Sat Oct 31 00:07:11 PDT
2020; root:xnu-7195.50.7~2/RELEASE_X86_64 x86_64 i386
Build Time: 1:12:36.073956
Sizes
=====
Maximum build usage: 9.984GB
Total size: 4.567GB
Installed : 1.682GB
Sources: 2.885GB
Patches: 367.221KB
Output
======
Build Set: 6/rtems-riscv
Build Set: 6/rtems-autotools.bset
Build Set: 6/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin20.1.0-1
building: autoconf-2.69-x86_64-apple-darwin20.1.0-1
sizes: autoconf-2.69-x86_64-apple-darwin20.1.0-1: 7.502MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin20.1.0-1
building: automake-1.12.6-x86_64-apple-darwin20.1.0-1
sizes: automake-1.12.6-x86_64-apple-darwin20.1.0-1: 8.083MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
Build Sizes: usage: 8.083MB total: 2.886GB (sources: 2.885GB, patches: 367.221KB, installed 0.000B)
Build Set: Time 0:00:19.965815
Build Set: 6/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin20.1.0-1
building: autoconf-2.69-x86_64-apple-darwin20.1.0-1
sizes: autoconf-2.69-x86_64-apple-darwin20.1.0-1: 10.520MB (installed: 3.020MB)
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin20.1.0-1
building: automake-1.12.6-x86_64-apple-darwin20.1.0-1
sizes: automake-1.12.6-x86_64-apple-darwin20.1.0-1: 10.346MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin20.1.0-1.xml
staging: autoconf-2.69-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-501-staging
staging: automake-1.12.6-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-501-staging
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
Build Sizes: usage: 15.805MB total: 2.891GB (sources: 2.885GB, patches: 367.221KB, installed 5.285MB)
Build Set: Time 0:00:18.567222
Build Set: Time 0:00:38.537409
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-apple-darwin20.1.0-1
building: expat-2.1.0-x86_64-apple-darwin20.1.0-1
sizes: expat-2.1.0-x86_64-apple-darwin20.1.0-1: 5.234MB (installed: 770.114KB)
cleaning: expat-2.1.0-x86_64-apple-darwin20.1.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin20.1.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin20.1.0-1.xml
config: devel/gmp-6.1.0.cfg
package: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
building: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
sizes: gmp-6.1.0-x86_64-apple-darwin20.1.0-1: 20.602MB (installed: 1.401MB)
cleaning: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
reporting: devel/gmp-6.1.0.cfg -> gmp-6.1.0-x86_64-apple-darwin20.1.0-1.txt
reporting: devel/gmp-6.1.0.cfg -> gmp-6.1.0-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-gdb-head.cfg
package: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1
building: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1
sizes: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1: 622.424MB (installed: 13.719MB)
cleaning: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-gdb-head.cfg -> riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-gdb-head.cfg -> riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-binutils-head.cfg
package: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1
building: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1
sizes: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1: 464.493MB (installed: 37.164MB)
cleaning: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-binutils-head.cfg -> riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-binutils-head.cfg -> riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-gcc-10-newlib-head.cfg
package: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1
building: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1
sizes: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1: 8.302GB (installed: 1.621GB)
cleaning: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-gcc-10-newlib-head.cfg -> riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-gcc-10-newlib-head.cfg -> riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-tools-6.cfg
package: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1
building: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1
sizes: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1: 113.853MB (installed: 9.025MB)
cleaning: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1.xml
config: devel/sis-2-1.cfg
package: sis-2.26-x86_64-apple-darwin20.1.0-1
building: sis-2.26-x86_64-apple-darwin20.1.0-1
sizes: sis-2.26-x86_64-apple-darwin20.1.0-1: 2.518MB (installed: 215.769KB)
cleaning: sis-2.26-x86_64-apple-darwin20.1.0-1
reporting: devel/sis-2-1.cfg -> sis-2.26-x86_64-apple-darwin20.1.0-1.txt
reporting: devel/sis-2-1.cfg -> sis-2.26-x86_64-apple-darwin20.1.0-1.xml
installing: expat-2.1.0-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: gmp-6.1.0-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1 -> /opt/work/builds/tools/6
installing: sis-2.26-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
cleaning: expat-2.1.0-x86_64-apple-darwin20.1.0-1
cleaning: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
cleaning: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1
cleaning: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1
cleaning: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1
cleaning: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1
cleaning: sis-2.26-x86_64-apple-darwin20.1.0-1
Build Sizes: usage: 9.984GB total: 4.567GB (sources: 2.885GB, patches: 367.221KB, installed 1.682GB)
installing: 6/rtems-riscv -> /opt/work/builds/tools/6
clean staging: 6/rtems-riscv
Staging Size: 5.292MB
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:20:45 2021
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:20:45 2021
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:22:23 2021
==============================================================================
Report: devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.1.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
Package: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/gmp-6.1.0.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
https://gmplib.org/
Version:
6.1.0
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:22:23 2021
==============================================================================
Report: devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.1.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
Package: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/gmp-6.1.0.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
https://gmplib.org/
Version:
6.1.0
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:29:19 2021
==============================================================================
Report: tools/rtems-gdb-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gdb-head.cfg
Summary:
GDB v8ca9c7e for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://www.gnu.org/software/gdb/
Version:
8ca9c7e
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-8ca9c7e.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/8ca9c7e
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source=sourceware-mirror-binutils-gdb-8ca9c7e
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS=""
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python2 --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:29:19 2021
==============================================================================
Report: tools/rtems-gdb-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gdb-8ca9c7e-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gdb-head.cfg
Summary:
GDB v8ca9c7e for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://www.gnu.org/software/gdb/
Version:
8ca9c7e
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-8ca9c7e.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/8ca9c7e
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source=sourceware-mirror-binutils-gdb-8ca9c7e
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS=""
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python2 --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:31:48 2021
==============================================================================
Report: tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-binutils-head.cfg
Summary:
Binutils v8ca9c7e for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://sources.redhat.com/binutils
Version:
8ca9c7e
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-8ca9c7e.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/8ca9c7e
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-8ca9c7e
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 02:31:48 2021
==============================================================================
Report: tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-binutils-8ca9c7e-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-binutils-head.cfg
Summary:
Binutils v8ca9c7e for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://sources.redhat.com/binutils
Version:
8ca9c7e
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-8ca9c7e.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/8ca9c7e
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-8ca9c7e
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 03:29:56 2021
==============================================================================
Report: tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gcc-10-newlib-head.cfg
Summary:
GCC v1e151fb and Newlib v9ad86f6 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://gcc.gnu.org/
Version:
1e151fb
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-1e151fb.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/1e151fb
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-9ad86f6.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/9ad86f6
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-gcov-Add-fprofile-info-section-support.patch
sha512: 284c4eb2180e8a7dac600b5833da5d2f99568b7fc2f873c145665ef56ab72ca3e9ac3da1e8bc88e72dd229f02a28402770d82ddd7a1b836836ae00cdfd1d400f
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-1e151fb
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-9ad86f6
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.18"
%setup source isl -q -D -n isl-0.18
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 6, RSB 295f9e94b9f08bae31673de3ecf66dd12b25b7b6, Newlib 9ad86f6" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec_prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --libexecdir=/opt/work/builds/tools/6/libexec --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --datadir=/opt/work/builds/tools/6/share --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/bin/riscv-rtems6-c++filt
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 03:29:56 2021
==============================================================================
Report: tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gcc-1e151fb-newlib-9ad86f6-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gcc-10-newlib-head.cfg
Summary:
GCC v1e151fb and Newlib v9ad86f6 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://gcc.gnu.org/
Version:
1e151fb
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-1e151fb.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/1e151fb
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-9ad86f6.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/9ad86f6
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-gcov-Add-fprofile-info-section-support.patch
sha512: 284c4eb2180e8a7dac600b5833da5d2f99568b7fc2f873c145665ef56ab72ca3e9ac3da1e8bc88e72dd229f02a28402770d82ddd7a1b836836ae00cdfd1d400f
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-1e151fb
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-9ad86f6
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.18"
%setup source isl -q -D -n isl-0.18
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 6, RSB 295f9e94b9f08bae31673de3ecf66dd12b25b7b6, Newlib 9ad86f6" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec_prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --libexecdir=/opt/work/builds/tools/6/libexec --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --datadir=/opt/work/builds/tools/6/share --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/bin/riscv-rtems6-c++filt
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 03:31:01 2021
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 90342feb4dd63d188ce945adfb0a7694a42a65cd for host x86_64-apple-darwin20.1.0
URL:
http://www.rtems.org/
Version:
90342feb4dd63d188ce945adfb0a7694a42a65cd
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd.tar.bz2
sha512: 81f7893891f71615eef3641149ed46f6996550a9f466b26d30f15e8ae7788714532ce4f456eef5306276773a28a8f500d93102c8a5014b875981576e902868d9
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
RT_HOST="--host=x86_64-apple-darwin20.1.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 03:31:01 2021
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 90342feb4dd63d188ce945adfb0a7694a42a65cd for host x86_64-apple-darwin20.1.0
URL:
http://www.rtems.org/
Version:
90342feb4dd63d188ce945adfb0a7694a42a65cd
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd.tar.bz2
sha512: 81f7893891f71615eef3641149ed46f6996550a9f466b26d30f15e8ae7788714532ce4f456eef5306276773a28a8f500d93102c8a5014b875981576e902868d9
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-90342feb4dd63d188ce945adfb0a7694a42a65cd
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
RT_HOST="--host=x86_64-apple-darwin20.1.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 03:31:10 2021
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.26-x86_64-apple-darwin20.1.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.26 for host x86_64-apple-darwin20.1.0
Version:
2.26
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.26.tar.bz2
sha512: 91c5699ae71113ea405300f4b19e072a9cdf334fe3b1d399ec497fe45ea9522076a310c05560676a960018497a062d7c573e27cc68716f07d2a12ba80881eb2a
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.26
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.26
ac_prefix=/opt/work/builds/tools/6
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "riscv-rtems6" != "" ; then
SIS_PREFIX="riscv-rtems6-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
make -j 4 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/opt/work/builds/tools/6/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.26
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Jan 16 03:31:10 2021
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 295f9e94b9f08bae31673de3ecf66dd12b25b7b6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.26-x86_64-apple-darwin20.1.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.26 for host x86_64-apple-darwin20.1.0
Version:
2.26
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.26.tar.bz2
sha512: 91c5699ae71113ea405300f4b19e072a9cdf334fe3b1d399ec497fe45ea9522076a310c05560676a960018497a062d7c573e27cc68716f07d2a12ba80881eb2a
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.26
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.26
ac_prefix=/opt/work/builds/tools/6
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "riscv-rtems6" != "" ; then
SIS_PREFIX="riscv-rtems6-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
make -j 4 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/opt/work/builds/tools/6/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.26
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list