[rtems-test] aarch64/xilinx_versal_vck190: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:571 Failed:2 Timeout:3 Test-Too-long:0 Invalid:0 Wrong:0
chrisj at rtems.org
chrisj at rtems.org
Thu Jul 1 14:22:24 UTC 2021
Testing time : 2:24:37.523617
Average test time: 0:00:14.858773
Host
====
FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
Configuration
=============
Version: 6.0.0.f2b08776424c50c71efe441ed04e674b0511b1eb
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 10.3.1 20210409 (RTEMS 6, RSB 4e6dc6431435821a534da6307e72ecbd7e42b82a, Newlib 0c0f3df)
Summary
=======
Passed: 571
Failed: 2
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 584
Failures:
malloc04.exe
psxconfig01.exe
User Input:
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
fsbdpart01.exe
stackchk01.exe
tztest.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /opt/work/6/bin/rtems-test --log=vck190.txt --meil --rtems-bsp=xilinx_versal_vck190 build/aarch64/xilinx_versal_lp64_vck190/testsuites/
Host: FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64
Python: 3.7.6 (default, Mar 3 2020, 01:18:14) [Clang 8.0.1 (tags/RELEASE_801/final 366581)]
Host: FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
[ 1/584] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: dhrystone.exe
<<skipping passes>>
[ 4/584] p:0 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: fsbdpart01.exe
Result: timeout Time: 0:03:11.582796 fsbdpart01.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_versal_lp64_vck190/testsuites/fstests/fsbdpart01.exe.img
=> target pretest: rtems-versal-mkimg build/aarch64/xilinx_versal_lp64_vck190/testsuites/fstests/fsbdpart01.exe
=> Image: build/aarch64/xilinx_versal_lp64_vck190/testsuites/fstests/fsbdpart01.exe
=> Image Name: RTEMS
=> Created: Thu Jul 1 21:59:59 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 80590 Bytes = 78.70 KiB = 0.08 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_versal_lp64_vck190/testsuites/fstests/fsbdpart01.exe.img
] [2543.715340] 1136.816259 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2546.602806]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2553.301112]+++++++Loading Prtn No: 0x7
] [2646.88386Size: 539424 Bytes
] [2649.514743]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2656.213000]+++++++Loading Prtn No: 0x8
] [2662.658487] 6.410168 ms for PrtnNum: 8, Size: 352 Bytes
] [2664.948431]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2671.648846]+++++++Loading Prtn No: 0x9
] [2676.121275] 480.393821]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2687.95484]+++++++Loading Prtn No: 0xA
] [2690.834731] 3.702+++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2702.282084]+++++++Loading Prtn No: 0xB
] [2711.309690] 8.991109 ms for PrtnNum: 11, Size: 41328 Bytes
] [2713.855984]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2720.385118]+++++++Loading Prtn No: 0xC
] es
] [2801.107540]++807.469784]+++++++Loading Prtn No: 0xD
] [2817.952240] 10.446443 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2820.593328]***********Boot PDI Load: Done*************
] [2825.598378]140.890071 ms: ROM Time
] [2828.821737]Total PLM Boot Time
] : BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 5a:3d:a5:7d:4f:79
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - 8a:b8:29:b7:c7:07
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 10 ms (48.8 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] DHCP client bound to address 10.10.5.145 (42 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] Loading: *#T T T T T T T T T T
] Retry count exceeded; starting again
] ## Booting kernel from Legacy Image at 08000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 80590 Bytes = 78.7 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... Bad Data CRC
] ERROR: can't get kernel image!
] resetting ...
] INFO: PSCI Power Domain Map:
] INFO: Domain Node : Level 1, parent_node -1, State ON (0x0)
] INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0x0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 0, State OFF (0x2)
] [50407.947934][WARN] XPmReset_SystemReset: [50408.842912]Failed to [1319.193143]****************************************
] [1321.100465]Xilinx Versal Platform Loader and Manager
] [1325.964896]Release 2020.1 May 28 2020 - 15:09:38
] [1330.743256]Platform Version: v1.0 PMC: v1.0, PS: v1.0
] [1335.607168]STDOUT: PS UART
] [1338.167196]****************************************
] [1342.899256] 24.827518 ms for PrtnNum: 1, Size: 2432 Bytes
] [1348.106118]+++++++Loading Image No: 0x2, Name: psmfw.elf, Id: 0x1C000000
] [1354.552965]+++++++Loading Prtn No: 0x2
] [1358.858925] 4.270265 ms for PrtnNum: 2, Size: 48 Bytes
] [1363.86109]+++++++Loading Prtn No: 0x3
] [1375.957668] 12.835168 ms for PrtnNum: 3, Size: 72848 Bytes
] [1378.464071]+++++++Loading Prtn No: 0x4
] [1383.653868] 5.153356 ms for PrtnNum: 4, Size: 8112 Bytes
] [1387.167853]+++++++Loading Prtn No: 0x5
] [1390.800862] 3.596628 ms for PrtnNum: 5, Size: 32 Bytes
] PSM Firmware version: 2020.1 [Build: May 28 2020 15:10:39 ]
] [1401.17887]+++++++Loading Image No: 0x3, Name: project_1_w., Id: 0x1C000000
] [1407.654209]+++++++Loading Prtn No: 0x6
] [2545.21893] 1137.331093 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2547.823571]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2554.524628]+++++++Loading Prtn No: 0x7
] [2648.219443] 93.658053 ms for PrtnNum: 7, Size: 539424 Bytes
] [2650.849746]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2657.550171]+++++++Loading Prtn No: 0x8
] [2663.997265] 6.410815 ms for PrtnNum: 8, Size: 352 Bytes
] [2666.287618]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2672.986418]+++++++Loading Prtn No: 0x9
] [2677.456406] 4.433771 ms for PrtnNum: 9, Size: 1136 Bytes
] [2681.725350]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2688.424343]+++++++Loading Prtn No: 0xA
] [2692.247503] 3.787065 ms for PrtnNum: 10, Size: 336 Bytes
] [2697.166768]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2703.696493]+++++++Loading Prtn No: 0xB
] [2712.718868] 8.986078 ms for PrtnNum: 11, Size: 41328 Bytes
] [2715.266456]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2721.797381]+++++++Loading Prtn No: 0xC
] [2799.834118] 78.475 ms for PrtnNum: 12, Size: 649808 Bytes
] [2802.296568]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2808.659503]+++++++Loading Prtn No: 0xD
] [2819.144006] 10.448468 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2821.786271]***********Boot PDI Load: Done*************
] [2826.792837]140.896881 ms: ROM Time
] [2830.15512]Total PLM Boot Time
] E: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 4e:0d:7a:e5:4f:56
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - 62:cb:2c:be:2b:98
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 9 ms (54.7 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.145 (1051 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] Loading: *T T T T T T T T T T
] Retry count exceeded; starting again
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] INFO: PSCI Power Domain Map:
] INFO: Domain Node : Level 1, parent_node -1, State ON (0x0)
] INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0x0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 0, State OFF (0x2)
] [51264.994106][WARN] XPmReset_SystemReset: [51265.889734]Failed to [1318.495246]****************************************
] [1320.401575]Xilinx Versal Platform Loader and Manager
] [1325.263578]Release 2020.1 May 28 2020 - 15:09:38
] [1330.39734]Platform Version: v1.0 PMC: v1.0, PS: v1.0
] [1334.817003]STDOUT: PS UART
] [1337.375950]****************************************
] [1342.104850] 24.733531 ms for PrtnNum: 1, Size: 2432 Bytes
] [1347.307056]+++++++Loading Image No: 0x2, Name: psmfw.elf, Id: 0x1C000000
] [1353.750131]+++++++Loading Prtn No: 0x2
] [1358.54771] 4.268387 ms for PrtnNum: 2, Size: 48 Bytes
] [1362.194921]+++++++Loading Prtn No: 0x3
] [1375.143543] 12.912396 ms for PrtnNum: 3, Size: 72848 Bytes
] [1377.647690]+++++++Loading Prtn No: 0x4
] [1382.834543] 5.151078 ms for PrtnNum: 4, Size: 8112 Bytes
] [1386.348256]+++++++Loading Prtn No: 0x5
] [1389.980015] 3.595256 ms for PrtnNum: 5, Size: 32 Bytes
] PSM Firmware version: 2020.1 [Build: May 28 2020 15:10:39 ]
] [1400.189918]+++++++Loading Image No: 0x3, Name: project_1_w., Id: 0x1C000000
] [1406.904915]+++++++Loading Prtn No: 0x6
] [2544.131434] 1137.189659 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2547.18418]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2553.634690]+++++++Loading Prtn No: 0x7
] [2647.338675] 93.667521 ms for PrtnNum: 7, Size: 539424 Bytes
] [2649.970687]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2656.670106]+++++++Loading Prtn No: 0x8
] [2663.116421] 6.410681 ms for PrtnNum: 8, Size: 352 Bytes
] [2665.405634]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2672.105837]+++++++Loading Prtn No: 0x9
] [2676.575846] 4.434012 ms for PrtnNum: 9, Size: 1136 Bytes
] [2680.848737]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2687.549418]+++++++Loading Prtn No: 0xA
] [2691.373718] 3.787440 ms for PrtnNum: 10, Size: 336 Bytes
] [2696.291950]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2702.822562]+++++++Loading Prtn No: 0xB
] [2711.844325] 8.985662 ms for PrtnNum: 11, Size: 41328 Bytes
] [2714.391328]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2720.922125]+++++++Loading Prtn No: 0xC
] [2798.910646] 77.951290 ms for PrtnNum: 12, Size: 649808 Bytes
] [2801.629212]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2807.990253]+++++++Loading Prtn No: 0xD
] [2818.474537] 10.447971 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2821.116490]***********Boot PDI Load: Done*************
] [2826.124078]140.842621 ms: ROM Time
] [2829.347200]Total PLM Boot Time
] : BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 5a:4c:84:ff:17:d5
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - b2:63:65:98:0c:b5
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 9 ms (54.7 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.145 (1050 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] *** TIMEOUT TIMEOUT
[ 5/584] p:0 f:0 u:0 e:0 I:0 B:3 t:1 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: fsclose01.exe
<<skipping passes>>
[124/584] p:117 f:1 u:1 e:0 I:0 B:3 t:1 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: stackchk01.exe
Result: timeout Time: 0:03:10.314596 stackchk01.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/stackchk01.exe.img
=> target pretest: rtems-versal-mkimg build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/stackchk01.exe
=> Image: build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/stackchk01.exe
=> Image Name: RTEMS
=> Created: Thu Jul 1 22:30:19 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 42302 Bytes = 41.31 KiB = 0.04 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/stackchk01.exe.img
] ^[bS47.313137] 93.569893 ms for PrtnNum: 7, Size: 539424 Bytes
] [2649.942631]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2656.638953]+++++++Loading Prtn No: 0x8
] [2663.83737] 6.408603 ms for PrtnNum: 8, Size: 352 Bytes
] [2665.287834]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1ding Prtn No: 0x9
] [2676.452796] 4.432093 ms for PrtnNum: 9, Size: 1136 Bytes
] [2680.721562]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C00[2691.239018] 3.784925 ms for PrtnNum: 10, Size: 336 Bytes
] [2696.154153]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2702.679671]+++++++Loading Prtn No: 0xB
] [2711.691162] 8.974928 ms for PrtnNum: 11, Size: 41328 Bytes
] [2714.236537]+++++++Loading Image No: 0x9, Name: Prtn No: 0xC
] [2798.7479565393]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2807.824878]+++++++Loading Prtn No: 0xD
] [2818.302150] 10.441090 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2820.942484]***********Boot PDI Load: Done*************
] [2825.945937]140.849568 ms: RO code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 1a:4a:74:67:7e:2e
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - fe:8b:03:1f:ac:b5
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 9 ms (54.7 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] DHCP client bound to address 10.10.5.145 (35 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] Loading: *###T T T T T T T T T T
] Retry count exceeded; starting again
] ## Booting kernel from Legacy Image at 08000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 42302 Bytes = 41.3 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... Bad Data CRC
] ERROR: can't get kernel image!
] resetting ...
] INFO: PSCI Power Domain Map:
] INFO: Domain Node : Level 1, parent_node -1, State ON (0x0)
] INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0x0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 0, State OFF (0x2)
] [51002.28250][WARN] XPmReset_SystemReset: [51002.837562]Failed to [1318.576525]****************************************
] [1320.483453]Xilinx Versal Platform Loader and Manager
] [1325.348075]Release 2020.1 May 28 2020 - 15:09:38
] [1330.126925]Platform Version: v1.0 PMC: v1.0, PS: v1.0
] [1334.990921]STDOUT: PS UART
] [1337.551512]****************************************
] [1342.282628] 24.828493 ms for PrtnNum: 1, Size: 2432 Bytes
] [1347.488512]+++++++Loading Image No: 0x2, Name: psmfw.elf, Id: 0x1C000000
] [1353.933978]+++++++Loading Prtn No: 0x2
] [1358.239759] 4.269365 ms for PrtnNum: 2, Size: 48 Bytes
] [1362.464093]+++++++Loading Prtn No: 0x3
] [1375.411159] 12.910868 ms for PrtnNum: 3, Size: 72848 Bytes
] [1377.915312]+++++++Loading Prtn No: 0x4
] [1383.103087] 5.151371 ms for PrtnNum: 4, Size: 8112 Bytes
] [1386.616759]+++++++Loading Prtn No: 0x5
] [1390.247218] 3.594300 ms for PrtnNum: 5, Size: 32 Bytes
] PSM Firmware version: 2020.1 [Build: May 28 2020 15:10:39 ]
] [1400.463075]+++++++Loading Image No: 0x3, Name: project_1_w., Id: 0x1C000000
] [1407.178062]+++++++Loading Prtn No: 0x6
] [2544.461962] 1137.246881 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2547.349528]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2554.49893]+++++++Loading Prtn No: 0x7
] [2647.656218] 93.569750 ms for PrtnNum: 7, Size: 539424 Bytes
] [2650.287437]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2656.989178]+++++++Loading Prtn No: 0x8
] [2663.436728] 6.411396 ms for PrtnNum: 8, Size: 352 Bytes
] [2665.727340]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2672.426650]+++++++Loading Prtn No: 0x9
] [2676.896956] 4.433956 ms for PrtnNum: 9, Size: 1136 Bytes
] [2681.165953]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2687.863637]+++++++Loading Prtn No: 0xA
] [2691.685621] 3.785681 ms for PrtnNum: 10, Size: 336 Bytes
] [2696.602571]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2703.131612]+++++++Loading Prtn No: 0xB
] [2712.158400] 8.990025 ms for PrtnNum: 11, Size: 41328 Bytes
] [2714.704503]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2721.233787]+++++++Loading Prtn No: 0xC
] [2799.267556] 77.996753 ms for PrtnNum: 12, Size: 649808 Bytes
] [2801.984334]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2808.344028]+++++++Loading Prtn No: 0xD
] [2818.823431] 10.443237 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2821.463796]***********Boot PDI Load: Done*************
] [2826.468181]140.838528 ms: ROM Time
] [2829.689753]Total PLM Boot Time
] : BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 82:0a:d5:e3:07:aa
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - d2:82:01:09:8c:e1
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 10 ms (48.8 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.145 (1044 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] Loading: *T T T T T T T T T T
] Retry count exceeded; starting again
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] INFO: PSCI Power Domain Map:
] INFO: Domain Node : Level 1, parent_node -1, State ON (0x0)
] INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0x0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 0, State OFF (0x2)
] [51262.932850][WARN] XPmReset_SystemReset: [51263.828590]Failed to [1318.547715]****************************************
] [1320.454521]Xilinx Versal Platform Loader and Manager
] [1325.317815]Release 2020.1 May 28 2020 - 15:09:38
] [1330.94640]Platform Version: v1.0 PMC: v1.0, PS: v1.0
] [1334.870390]STDOUT: PS UART
] [1337.429025]****************************************
] [1342.157725] 24.733350 ms for PrtnNum: 1, Size: 2432 Bytes
] [1347.361393]+++++++Loading Image No: 0x2, Name: psmfw.elf, Id: 0x1C000000
] [1353.806446]+++++++Loading Prtn No: 0x2
] [1358.112431] 4.269903 ms for PrtnNum: 2, Size: 48 Bytes
] [1362.338303]+++++++Loading Prtn No: 0x3
] [1375.287621] 12.912796 ms for PrtnNum: 3, Size: 72848 Bytes
] [1377.791631]+++++++Loading Prtn No: 0x4
] [1382.979771] 5.152025 ms for PrtnNum: 4, Size: 8112 Bytes
] [1386.492528]+++++++Loading Prtn No: 0x5
] [1390.122962] 3.593993 ms for PrtnNum: 5, Size: 32 Bytes
] PSM Firmware version: 2020.1 [Build: May 28 2020 15:10:39 ]
] [1400.334371]+++++++Loading Image No: 0x3, Name: project_1_w., Id: 0x1C000000
] [1407.49221]+++++++Loading Prtn No: 0x6
] [2544.811856] 1137.725575 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2547.699306]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2554.399600]+++++++Loading Prtn No: 0x7
] [2648.171268] 93.734671 ms for PrtnNum: 7, Size: 539424 Bytes
] [2650.801703]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2657.501234]+++++++Loading Prtn No: 0x8
] [2663.947850] 6.410553 ms for PrtnNum: 8, Size: 352 Bytes
] [2666.238187]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2672.937328]+++++++Loading Prtn No: 0x9
] [2677.407665] 4.434031 ms for PrtnNum: 9, Size: 1136 Bytes
] [2681.678768]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2688.378006]+++++++Loading Prtn No: 0xA
] [2692.202565] 3.788031 ms for PrtnNum: 10, Size: 336 Bytes
] [2697.120546]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2703.650815]+++++++Loading Prtn No: 0xB
] [2712.676387] 8.989262 ms for PrtnNum: 11, Size: 41328 Bytes
] [2715.222846]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2721.756009]+++++++Loading Prtn No: 0xC
] [2799.771075] 77.978128 ms for PrtnNum: 12, Size: 649808 Bytes
] [2802.489293]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2808.852784]+++++++Loading Prtn No: 0xD
] [2819.337643] 10.448315 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2821.979268]***********Boot PDI Load: Done*************
] [2826.985875]140.848015 ms: ROM Time
] [2830.208906]Total PLM Boot Time
] : BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - be:76:37:bf:62:a3
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - 3a:c6:25:0f:4a:f6
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 9 ms (54.7 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.145 (1039 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] *** TIMEOUT TIMEOUT
[125/584] p:117 f:1 u:1 e:0 I:0 B:3 t:2 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: stringto01.exe
<<skipping passes>>
[144/584] p:134 f:1 u:3 e:0 I:0 B:3 t:2 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: tztest.exe
Result: timeout Time: 0:03:10.621921 tztest.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/tztest.exe.img
=> target pretest: rtems-versal-mkimg build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/tztest.exe
=> Image: build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/tztest.exe
=> Image Name: RTEMS
=> Created: Thu Jul 1 22:38:25 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 54911 Bytes = 53.62 KiB = 0.05 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_versal_lp64_vck190/testsuites/libtests/tztest.exe.img
] [2543.798321] 1136.259053 ms for PrtnNum: 6, Size: 9156736 Bytes
] [ No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2553.380178]+++++++Loading Prtn No: 0x7
] 539424 Bytes
] [2649.622175]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2656.319700]+++++++Loading Prtn No: 0x8
] [2662.765115] 6.409040 ms for PrtnNum: 8, Size: 352 Bytes
] [2665.54475]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2671.6641s for PrtnNum: 9, Size: 1136 Bytes
] [2680.400821]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2687.98271]+++++++Loading Prtn No: 0xA
] [2690.835487] 3.700603 ms for PrtnNum: 10, Size: 336 Bytes
] [2695.750518]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2702.277487]+++++++Loading Prtn No: 0xB
] [2711.301621] 8.987862 ms for PrtnNum: 11, Size: 41328 Bytes
] [2713.846600]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2720.371228]+++++++Loading Prtn No: 0xC
] [2798.299909] 77.892003 ms for Pmage No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2807.287112]+++++++Loading Prtn No: 0xD
] [2817.762871] 10.439746 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2820.400584]***********Boot PDI Load: Done*************
] [2825.402168]140.789165 ms: ROM Time
] [2828.622550]OTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 8e:c3:5e:80:5c:81
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - 56:c4:a5:69:9a:35
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 9 ms (54.7 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] DHCP client bound to address 10.10.5.145 (82 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] Loading: *#T T T T T T T T T T
] Retry count exceeded; starting again
] ## Booting kernel from Legacy Image at 08000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 54911 Bytes = 53.6 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... Bad Data CRC
] ERROR: can't get kernel image!
] resetting ...
] INFO: PSCI Power Domain Map:
] INFO: Domain Node : Level 1, parent_node -1, State ON (0x0)
] INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0x0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 0, State OFF (0x2)
] [50446.633146][WARN] XPmReset_SystemReset: [50447.528512]Failed to [1318.521575]****************************************
] [1320.428028]Xilinx Versal Platform Loader and Manager
] [1325.289068]Release 2020.1 May 28 2020 - 15:09:38
] [1330.65143]Platform Version: v1.0 PMC: v1.0, PS: v1.0
] [1334.842275]STDOUT: PS UART
] [1337.401134]****************************************
] [1342.130821] 24.732796 ms for PrtnNum: 1, Size: 2432 Bytes
] [1347.334493]+++++++Loading Image No: 0x2, Name: psmfw.elf, Id: 0x1C000000
] [1353.779728]+++++++Loading Prtn No: 0x2
] [1358.85681] 4.269518 ms for PrtnNum: 2, Size: 48 Bytes
] [1362.226378]+++++++Loading Prtn No: 0x3
] [1375.180828] 12.918131 ms for PrtnNum: 3, Size: 72848 Bytes
] [1377.685371]+++++++Loading Prtn No: 0x4
] [1382.872437] 5.150918 ms for PrtnNum: 4, Size: 8112 Bytes
] [1386.385531]+++++++Loading Prtn No: 0x5
] [1390.17190] 3.593675 ms for PrtnNum: 5, Size: 32 Bytes
] PSM Firmware version: 2020.1 [Build: May 28 2020 15:10:39 ]
] [1400.141200]+++++++Loading Image No: 0x3, Name: project_1_w., Id: 0x1C000000
] [1406.856368]+++++++Loading Prtn No: 0x6
] [2543.952553] 1137.59031 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2546.754268]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2553.450253]+++++++Loading Prtn No: 0x7
] [2647.122887] 93.635803 ms for PrtnNum: 7, Size: 539424 Bytes
] [2649.753618]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2656.450787]+++++++Loading Prtn No: 0x8
] [2662.895731] 6.408840 ms for PrtnNum: 8, Size: 352 Bytes
] [2665.183906]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2671.879140]+++++++Loading Prtn No: 0x9
] [2676.346843] 4.431534 ms for PrtnNum: 9, Size: 1136 Bytes
] [2680.613371]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2687.306437]+++++++Loading Prtn No: 0xA
] [2691.126784] 3.783553 ms for PrtnNum: 10, Size: 336 Bytes
] [2696.40293]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2702.481846]+++++++Loading Prtn No: 0xB
] [2711.500703] 8.982631 ms for PrtnNum: 11, Size: 41328 Bytes
] [2714.44428]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2720.483600]+++++++Loading Prtn No: 0xC
] [2798.440981] 77.920587 ms for PrtnNum: 12, Size: 649808 Bytes
] [2801.155881]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2807.511421]+++++++Loading Prtn No: 0xD
] [2817.986362] 10.439043 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2820.626434]***********Boot PDI Load: Done*************
] [2825.628078]140.889756 ms: ROM Time
] [2828.849421]Total PLM Boot Time
] : BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 02:6d:31:5f:59:0c
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - 12:1f:c9:14:18:d0
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 9 ms (54.7 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.145 (1039 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] Loading: *T T T T T T T T T T
] Retry count exceeded; starting again
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
] INFO: PSCI Power Domain Map:
] INFO: Domain Node : Level 1, parent_node -1, State ON (0x0)
] INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0x0, parent_node 0, State ON (0x0)
] INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 0, State OFF (0x2)
] [51248.865546][WARN] XPmReset_SystemReset: [51249.760812]Failed to [1318.583368]****************************************
] [1320.491409]Xilinx Versal Platform Loader and Manager
] [1325.355746]Release 2020.1 May 28 2020 - 15:09:38
] [1330.134578]Platform Version: v1.0 PMC: v1.0, PS: v1.0
] [1334.997478]STDOUT: PS UART
] [1337.556887]****************************************
] [1342.288906] 24.827615 ms for PrtnNum: 1, Size: 2432 Bytes
] [1347.493809]+++++++Loading Image No: 0x2, Name: psmfw.elf, Id: 0x1C000000
] [1353.941862]+++++++Loading Prtn No: 0x2
] [1358.247471] 4.269384 ms for PrtnNum: 2, Size: 48 Bytes
] [1362.473325]+++++++Loading Prtn No: 0x3
] [1375.428840] 12.918896 ms for PrtnNum: 3, Size: 72848 Bytes
] [1377.934250]+++++++Loading Prtn No: 0x4
] [1383.124296] 5.153787 ms for PrtnNum: 4, Size: 8112 Bytes
] [1386.638440]+++++++Loading Prtn No: 0x5
] [1390.271400] 3.596815 ms for PrtnNum: 5, Size: 32 Bytes
] PSM Firmware version: 2020.1 [Build: May 28 2020 15:10:39 ]
] [1400.488209]+++++++Loading Image No: 0x3, Name: project_1_w., Id: 0x1C000000
] [1407.206459]+++++++Loading Prtn No: 0x6
] [2544.722390] 1137.478925 ms for PrtnNum: 6, Size: 9156736 Bytes
] [2547.610487]+++++++Loading Image No: 0x4, Name: project_1_w., Id: 0x1C000000
] [2554.311468]+++++++Loading Prtn No: 0x7
] [2648.90875] 93.742390 ms for PrtnNum: 7, Size: 539424 Bytes
] [2650.637409]+++++++Loading Image No: 0x5, Name: ai_engine_da, Id: 0x1C000000
] [2657.339093]+++++++Loading Prtn No: 0x8
] [2663.786365] 6.411175 ms for PrtnNum: 8, Size: 352 Bytes
] [2666.78071]+++++++Loading Image No: 0x6, Name: fpd_data.cdo, Id: 0x1C000000
] [2672.693881]+++++++Loading Prtn No: 0x9
] [2677.165112] 4.434984 ms for PrtnNum: 9, Size: 1136 Bytes
] [2681.436965]+++++++Loading Image No: 0x7, Name: subsystem.cd, Id: 0x1C000000
] [2688.137540]+++++++Loading Prtn No: 0xA
] [2691.961987] 3.788593 ms for PrtnNum: 10, Size: 336 Bytes
] [2696.881693]+++++++Loading Image No: 0x8, Name: system.dtb, Id: 0x1C000000
] [2703.412840]+++++++Loading Prtn No: 0xB
] [2712.439090] 8.989953 ms for PrtnNum: 11, Size: 41328 Bytes
] [2714.985171]+++++++Loading Image No: 0x9, Name: u-boot.elf, Id: 0x1C000000
] [2721.517100]+++++++Loading Prtn No: 0xC
] [2799.538650] 77.984515 ms for PrtnNum: 12, Size: 649808 Bytes
] [2802.257603]+++++++Loading Image No: 0xA, Name: bl31.elf, Id: 0x1C000000
] [2808.621406]+++++++Loading Prtn No: 0xD
] [2819.106187] 10.448946 ms for PrtnNum: 13, Size: 59360 Bytes
] N[2821.748128]***********Boot PDI Load: Done*************
] [2826.755337]140.890268 ms: ROM Time
] [2829.979412]Total PLM Boot Time
] : BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.2(debug):v1.1-5588-g5918e656e
] NOTICE: BL31: Built : 15:00:57, May 28 2020
] INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
] INFO: BL31: Initializing runtime services
] WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing!
] INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
] INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
] INFO: BL31: Preparing for EL3 exit to normal world
] INFO: Entry point address = 0x8000000
] INFO: SPSR = 0x3c9
]
]
] U-Boot 2020.01 (May 28 2020 - 15:09:15 +0000)
]
] Model: Xilinx Versal vck190 Eval board revA (QSPI)
] DRAM: 6 GiB
] EL Level: EL2
] MMC: sdhci at f1050000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Bootmode: LVL_SHFT_SD_MODE1
] Net:
] ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0c0000 (eth0) using random MAC address - 52:fa:81:b4:c4:bb
] eth0: ethernet at ff0c0000
] ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id
]
] Warning: ethernet at ff0d0000 (eth1) using random MAC address - 26:1f:93:30:67:c2
] , eth1: ethernet at ff0d0000
] Hit any key to stop autoboot: 5 4 3 2 1 0
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] Found U-Boot script /boot.scr
] 506 bytes read in 10 ms (48.8 KiB/s)
] ## Executing script at 20000000
] [?25l[2J[1;1H[1;1H[2K[2;1H *** U-Boot Boot Menu ***[0K[3;1H[2K[8;1H[2K[9;1H Press UP/DOWN to move, ENTER to select[0K[10;1H[2K[4;1H [7mRTEMS[0m[5;1H Linux[6;1H U-Boot console[8;1H Hit any key to stop autoboot: 1 0 [8;1H[2K[?25h[2J[1;1HBOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.145 (1044 ms)
] Using ethernet at ff0c0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.145
] Filename 'vck190/rtems.img'.
] Load address: 0x8000000
] *** TIMEOUT TIMEOUT
[145/584] p:134 f:1 u:3 e:0 I:0 B:3 t:3 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: uid01.exe
<<skipping passes>>
[584/584] p:570 f:2 u:5 e:0 I:0 B:3 t:3 L:0 i:0 W:0 | aarch64/xilinx_versal_vck190: ts-validation-1.exe
Passed: 571
Failed: 2
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 584
Failures:
malloc04.exe
psxconfig01.exe
User Input:
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
fsbdpart01.exe
stackchk01.exe
tztest.exe
Average test time: 0:00:14.858773
Testing time : 2:24:37.523617
More information about the build
mailing list