[rtems-test] aarch64/xilinx_zynqmp_lp64_zu3eg: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:7 Failed:0 Timeout:1 Test-Too-long:0 Invalid:0 Wrong:1
chrisj at rtems.org
chrisj at rtems.org
Fri Sep 3 06:58:07 UTC 2021
Testing time : 0:07:19.355067
Average test time: 0:00:43.935507
Host
====
FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
Configuration
=============
Version: 6.0.0.9bb09bc488eaea70c2958d9fd21d7bde38a721e6
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
Summary
=======
Passed: 7
Failed: 0
User Input: 1
Expected Fail: 0
Indeterminate: 0
Benchmark: 0
Timeout: 1
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 1
-----------------
Total: 10
User Input:
capture.exe
Timeouts:
fileio.exe
Wrong Tools:
nsecs.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /opt/work/rtems/6/bin/rtems-test --rtems-bsp=xilinx_zynqmp_lp64_zu3eg --mail --to=build at rtems.org build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/
Host: FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64
Python: 3.7.6 (default, Mar 3 2020, 01:18:14) [Clang 8.0.1 (tags/RELEASE_801/final 366581)]
Host: FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
[ 1/10] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: base_sp.exe
<<skipping passes>>
[ 4/10] p:2 f:0 u:1 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: fileio.exe
Result: timeout Time: 0:03:15.383565 fileio.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/fileio.exe.img
=> target pretest: rtems-zynqmp-lp64-mkimg build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/fileio.exe
=> Image: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/fileio.exe
=> Image Name: RTEMS
=> Created: Fri Sep 3 16:52:10 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 285529 Bytes = 278.84 KiB = 0.27 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/fileio.exe.img
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] erial at ff000000
] Out: serial at ff00MP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bouautoboot: 4 3 2 1 0
] 145 bytes read in 11 ms (12.7 KiB/s)
] LSD ...
] Running uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *####################
] 19.5 KiB/s
] l from Legacy Image at 10800000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 285529 Bytes = 278.8 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 10000000) ...
] HHII TT)
] U*$T)R
] IIHHII U*$URJrrr*"2"
] *jRRRU5EiEUJ5UJ
] UUHHII U*$UR: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 10.3.1 20210409 (RTEMS 6%
] Z2JzBjRPress any key to start file I/O sample (19s remaining)
] Press any key to start file I/O sample (18s remaining)
] Press any key to start file I/O sample (17s remaining)
] Press any key to start file I/O sample (16s remaining)
] Press any key to start file I/O sample (15s remaining)
] Press any key to start file I/O sample (14s remaining)
] Press any key to start file I/O sample (13s remaining)
] Press any key to start file I/O sample (12s remaining)
] Press any key to start file I/O sample (11s remaining)
] Press any key to start file I/O sample (10s remaining)
] Press any key to start file I/O sample (9s remaining)
] Press any key to start file I/O sample (8s remaining)
] Press any key to start file I/O sample (7s remaining)
] Press any key to start file I/O sample (6s remaining)
] Press any key to start file I/O sample (5s remaining)
] Press any key to start file I/O sample (4s remaining)
] Press any key to start file I/O sample (3s remaining)
] Press any key to start file I/O sample (2s remaining)
] Press any key to start file I/O sample (1s remaining)
]
=> test end: None
] *** END OF TEST FILE I/O ***
]
]
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.9bb09bc488eaea70c2958d9fd21d7bde38a721e6
] RTEMS tools: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
] --------------------------------------------------------------------------------
] Xilinx Zynq MP First Stage Boot Loader (TE modified)
] Release 2019.2 Jun 2 2020 - 10:50:36
] Device Name: XCZU2CG
]
] --------------------------------------------------------------------------------
] TE0802 TE_XFsbl_BoardInit_Custom
] Reset Complete
]
] --------------------------------------------------------------------------------
] NOTICE: ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
] NOTICE: BL31: Secure code at 0x0
] NOTICE: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
] NOTICE: BL31: Built : 20:31:20, May 26 2020
] PMUFW: v1.1
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] MMC: mmc at ff160000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.151 (1022 ms)
] Hit any key to stop autoboot: 4 3 2 1 0
] 145 bytes read in 11 ms (12.7 KiB/s)
] Loaded environment from uEnv.txt
] Importing environment from SD ...
] Running uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *T T T T T T T T T T
=> target reset condition detected
=> target reset: cs-pw-ctl 4 toggle-on 2 3
] Retry count exceeded; starting again
] ## Booting kernel from Legacy Image at 10800000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 285529 Bytes = 278.8 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... Bad Data CRC
] ERROR: can't get kernel image!
] resetting ...
]
] --------------------------------------------------------------------------------
] Xilinx Zynq MP First Stage Boot Loader (TE modified)
] Release 2019.2 Jun 2 2020 - 10:50:36
] Device Name: XCZU2CG
]
] --------------------------------------------------------------------------------
] TE0802 TE_XFsbl_BoardInit_Custom
] Reset Complete
]
] --------------------------------------------------------------------------------
] NOTICE: ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
] NOTICE: BL31: Secure code at 0x0
] NOTICE: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
] NOTICE: BL31: Built : 20:31:20, May 26 2020
] PMUFW: v1.1
] 8- 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: EXTERNAL
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] any key to stop autoboot: 4 3 2 1 0
] m uEnv.txt
] Importing environment from SD ...
] Running uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *T T T T T T T T T T bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] --------------------------------------------------------------------------------
] Xilinx Zynq MP First Stage Boot Loader (TE modified)
] Release 2019.2 Jun 2 2020 - 10:50:36
] Device Name: XCZU2CG
]
] --------------------------------------------------------------------------------
] TE0802 TE_XFsbl_BoardInit_Custom
] Reset Complete
]
] --------------------------------------------------------------------------------
] NOTICE: ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
] NOTICE: BL31: Secure code at 0x0
] NOTICE: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
] NOTICE: BL31: Built : 20:31:20, May 26 2020
] PMUFW: v1.1
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] MMC: mmc at ff160000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] BOOTP broadcast 3
] DHCP client bound to address 10.10.5.151 (1573 ms)
] *** TIMEOUT TIMEOUT
[ 5/10] p:2 f:0 u:1 e:0 I:0 B:0 t:1 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: hello.exe
<<skipping passes>>
[ 7/10] p:4 f:0 u:1 e:0 I:0 B:0 t:1 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: nsecs.exe
Result: wrong-tools Time: 0:00:15.626262 nsecs.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/nsecs.exe.img
=> target pretest: rtems-zynqmp-lp64-mkimg build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/nsecs.exe
=> Image: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/nsecs.exe
=> Image Name: RTEMS
=> Created: Fri Sep 3 16:56:15 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 60296 Bytes = 58.88 KiB = 0.06 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/samples/nsecs.exe.img
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] erial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.15 3 2 1 0
] environment from ning uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *#####x)
] ## Booting kerne
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 60296 Bytes = 58.9 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 10000000) ...
]
]
=> test start: NANOSECOND CLOCK
] *** BEGIN OF TEST NANOSECOND CLOCK ***
] *** TEST VERSION: 6.0.0.9bb09bc488eaea70c2958d9fd21d7bde38a721e6
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 10.39424, Newlib 0c0f3df)
] 10 iterations of getting TOD
] Start: Sat Mar 24 11:15:00 2007:2599979
] Stop : Sat Mar 24 11:15:00 2007:2600070 --> 0:91
] Start: Sat Mar 24 11:15:00 2007:10496880
] Stop : Sat Mar 24 11:15:00 2007:10496940 --> 0:60
] Start: Sat Mar 24 11:15:00 2007:18569250
] Stop : Sat Mar 24 11:15:00 2007:18569340 --> 0:90
] Start: Sat Mar 24 11:15:00 2007:26641770
] Stop : Sat Mar 24 11:15:00 2007:26641860 --> 0:90
] Start: Sat Mar 24 11:15:00 2007:34714201
] Stop : Sat Mar 24 11:15:00 2007:34714291 --> 0:90
] Start: Sat Mar 24 11:15:00 2007:42786601
] Stop : Sat Mar 24 11:15:00 2007:42786691 --> 0:90
] Start: Sat Mar 24 11:15:00 2007:50858851
] Stop : Sat Mar 24 11:15:00 2007:50858911 --> 0:60
] Start: Sat Mar 24 11:15:00 2007:58931222
] Stop : Sat Mar 24 11:15:00 2007:58931282 --> 0:60
] Start: Sat Mar 24 11:15:00 2007:67003802
] Stop : Sat Mar 24 11:15:00 2007:67003892 --> 0:90
] Start: Sat Mar 24 11:15:00 2007:75076202
] Stop : Sat Mar 24 11:15:00 2007:75076262 --> 0:60
]
] 10 iterations of getting Uptime
] 0:105862084 0:105862174 --> 0:90
] 0:108813244 0:108813304 --> 0:60
] 0:111764494 0:111764554 --> 0:60
] 0:114715774 0:114715834 --> 0:60
] 0:117667054 0:117667114 --> 0:60
] 0:120618064 0:120618124 --> 0:60
] 0:123569314 0:123569374 --> 0:60
] 0:126520565 0:126520654 --> 0:89
] 0:129471844 0:129471935 --> 0:91
] 0:132422855 0:132422945 --> 0:90
]
] 10 iterations of getting Uptime with different loop values
] loop of 10000 0:140755655 0:140814095 --> 0:58440
] loop of 20000 0:145182485 0:145299215 --> 0:116730
] loop of 30000 0:149696075 0:149871155 --> 0:175080
] loop of 40000 0:154209636 0:154443036 --> 0:233400
] loop of 50000 0:158723466 0:159015756 --> 0:292290
] loop of 60000 0:163236876 0:163586946 --> 0:350070
] loop of 70000 0:167750586 0:168159546 --> 0:408960
] loop of 80000 0:172264176 0:172730916 --> 0:466740
] loop of 90000 0:176777856 0:177303486 --> 0:525630
] loop of 100000 0:181291387 0:181874797 --> 0:583410
]
=> test end: NANOSECOND CLOCK
] *** END OF TEST NANOSECOND CLOCK ***
[ 8/10] p:4 f:0 u:1 e:0 I:0 B:0 t:1 L:0 i:0 W:1 | aarch64/xilinx_zynqmp_lp64_zu3eg: paranoia.exe
<<skipping passes>>
[10/10] p:6 f:0 u:1 e:0 I:0 B:0 t:1 L:0 i:0 W:1 | aarch64/xilinx_zynqmp_lp64_zu3eg: unlimited.exe
Passed: 7
Failed: 0
User Input: 1
Expected Fail: 0
Indeterminate: 0
Benchmark: 0
Timeout: 1
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 1
-----------------
Total: 10
User Input:
capture.exe
Timeouts:
fileio.exe
Wrong Tools:
nsecs.exe
Average test time: 0:00:43.935507
Testing time : 0:07:19.355067
More information about the build
mailing list