Build Linux: PASSED 6/rtems-microblaze on x86_64-linux-gnu

joel at rtems.org joel at rtems.org
Sat Sep 4 08:52:00 UTC 2021


RTEMS Source Builder - Set Builder, 6 (4137b990e487)

Host: Linux-3.10.0-1160.36.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core
       Linux devel.oarcorp.com 3.10.0-1160.36.2.el7.x86_64 #1 SMP Wed Jul 21
       11:57:15 UTC 2021 x86_64 x86_64

Build Time: 1:56:01.182429

Sizes
=====

Maximum build usage: 6.836GB
Total size: 2.434GB
Installed : 1.410GB
Sources: 1.023GB
Patches: 358.725KB

Output
======

Build Set: 6/rtems-microblaze
Build Set: 6/rtems-autotools.bset
Build Set: 6/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.504MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-linux-gnu-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.090MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-linux-gnu-1
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Sizes: usage: 8.090MB total: 1.023GB (sources: 1.023GB, patches: 358.725KB, installed 0.000B)
Build Set: Time 0:00:41.082004
Build Set: 6/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
sizes: autoconf-2.69-x86_64-linux-gnu-1: 10.534MB (installed: 3.032MB)
cleaning: autoconf-2.69-x86_64-linux-gnu-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
sizes: automake-1.12.6-x86_64-linux-gnu-1: 10.353MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-linux-gnu-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
staging: autoconf-2.69-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001-staging
staging: automake-1.12.6-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1001-staging
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Sizes: usage: 15.829MB total: 1.028GB (sources: 1.023GB, patches: 358.725KB, installed 5.296MB)
Build Set: Time 0:01:04.746159
Build Set: Time 0:01:45.833938
config: devel/dtc-1.6.0-1.cfg
package: dtc-1.6.0-x86_64-linux-gnu-1
building: dtc-1.6.0-x86_64-linux-gnu-1
sizes: dtc-1.6.0-x86_64-linux-gnu-1: 4.225MB (installed: 1.086MB)
cleaning: dtc-1.6.0-x86_64-linux-gnu-1
reporting: devel/dtc-1.6.0-1.cfg -> dtc-1.6.0-x86_64-linux-gnu-1.txt
reporting: devel/dtc-1.6.0-1.cfg -> dtc-1.6.0-x86_64-linux-gnu-1.xml
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-linux-gnu-1
building: expat-2.1.0-x86_64-linux-gnu-1
sizes: expat-2.1.0-x86_64-linux-gnu-1: 7.637MB (installed: 1.417MB)
cleaning: expat-2.1.0-x86_64-linux-gnu-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
config: devel/gmp-6.1.0.cfg
package: gmp-6.1.0-x86_64-linux-gnu-1
building: gmp-6.1.0-x86_64-linux-gnu-1
sizes: gmp-6.1.0-x86_64-linux-gnu-1: 37.394MB (installed: 5.324MB)
cleaning: gmp-6.1.0-x86_64-linux-gnu-1
reporting: devel/gmp-6.1.0.cfg -> gmp-6.1.0-x86_64-linux-gnu-1.txt
reporting: devel/gmp-6.1.0.cfg -> gmp-6.1.0-x86_64-linux-gnu-1.xml
config: tools/rtems-gdb-10.cfg
package: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1
building: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1
sizes: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1: 956.576MB (installed: 116.617MB)
cleaning: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-10.cfg -> microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-10.cfg -> microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1.xml
config: tools/rtems-xilinx-binutils-2.36.cfg
package: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
building: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
sizes: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1: 654.373MB (installed: 133.008MB)
cleaning: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
reporting: tools/rtems-xilinx-binutils-2.36.cfg -> microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1.txt
reporting: tools/rtems-xilinx-binutils-2.36.cfg -> microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1.xml
config: tools/rtems-xilinx-gcc-10-newlib-head.cfg
package: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1
warning: 0001-gcc-config-aarch64-rtems.h-Define--USE-INIT-FINI-.patch: no hash found
building: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1
sizes: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1: 5.426GB (installed: 1.098GB)
cleaning: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1
reporting: tools/rtems-xilinx-gcc-10-newlib-head.cfg -> microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1.txt
reporting: tools/rtems-xilinx-gcc-10-newlib-head.cfg -> microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1.xml
config: tools/rtems-tools-6.cfg
package: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1
building: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1
sizes: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1: 243.236MB (installed: 62.439MB)
cleaning: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1.xml
installing: dtc-1.6.0-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/tools/6
installing: expat-2.1.0-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/tools/6
installing: gmp-6.1.0-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/tools/6
installing: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/tools/6
installing: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/tools/6
installing: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1 -> /home/joel/rtems-cron-6/tools/6
installing: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1 -> /home/joel/rtems-cron-6/tools/6
cleaning: dtc-1.6.0-x86_64-linux-gnu-1
cleaning: expat-2.1.0-x86_64-linux-gnu-1
cleaning: gmp-6.1.0-x86_64-linux-gnu-1
cleaning: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1
cleaning: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
cleaning: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1
cleaning: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1
Build Sizes: usage: 6.836GB total: 2.434GB (sources: 1.023GB, patches: 358.725KB, installed 1.410GB)
installing: 6/rtems-microblaze -> /home/joel/rtems-cron-6/tools/6
clean staging: 6/rtems-microblaze
Staging Size: 5.304MB
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 01:58:06 2021
==============================================================================
Report: devel/dtc-1.6.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.0-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.0-x86_64-linux-gnu-1
 Config: devel/dtc-1.6.0-1.cfg
 Summary:
  Device Tree Compiler v1.6.0 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  https://www.devicetree.org/
 Version:
  1.6.0
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.0.tar.gz
       sha256: 9fbe07223a98f2d7088a340b5505d4dfe682d77580e788d08cfcc1b61d8be237
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.6.0
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.6.0
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  make PREFIX=/home/joel/rtems-cron-6/tools/6
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.6.0
  make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-cron-6/tools/6 install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 01:58:07 2021
==============================================================================
Report: devel/dtc-1.6.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.0-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.0-x86_64-linux-gnu-1
 Config: devel/dtc-1.6.0-1.cfg
 Summary:
  Device Tree Compiler v1.6.0 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  https://www.devicetree.org/
 Version:
  1.6.0
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.0.tar.gz
       sha256: 9fbe07223a98f2d7088a340b5505d4dfe682d77580e788d08cfcc1b61d8be237
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.6.0
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.6.0
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  make PREFIX=/home/joel/rtems-cron-6/tools/6
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.6.0
  make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-cron-6/tools/6 install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 01:58:43 2021
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
 Config: devel/expat-2.1.0-1.cfg
 Summary:
  Expat XML Parser v2.1.0 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://expat.sourceforge.net/
 Version:
  2.1.0
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
       sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.1.0
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --verbose  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 01:58:44 2021
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-linux-gnu-1
 Config: devel/expat-2.1.0-1.cfg
 Summary:
  Expat XML Parser v2.1.0 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://expat.sourceforge.net/
 Version:
  2.1.0
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
       sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.1.0
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --verbose  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 02:01:45 2021
==============================================================================
Report: devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.1.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
Package: gmp-6.1.0-x86_64-linux-gnu-1
 Config: devel/gmp-6.1.0.cfg
 Summary:
  The GNU Multiple Precision Arithmetic Library (GMP) v6.1.0 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  https://gmplib.org/
 Version:
  6.1.0
 Release:
  1
  Sources: 1
    1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source gmp -q -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd gmp-6.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --verbose  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd gmp-6.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 02:01:45 2021
==============================================================================
Report: devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.1.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
Package: gmp-6.1.0-x86_64-linux-gnu-1
 Config: devel/gmp-6.1.0.cfg
 Summary:
  The GNU Multiple Precision Arithmetic Library (GMP) v6.1.0 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  https://gmplib.org/
 Version:
  6.1.0
 Release:
  1
  Sources: 1
    1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source gmp -q -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd gmp-6.1.0
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --verbose  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd gmp-6.1.0
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 02:10:33 2021
==============================================================================
Report: tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-10.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1
 Config: tools/rtems-gdb-10.cfg
 Summary:
  GDB v7ab567f for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  7ab567f
 Release:
  1
  Sources: 1
    1: --rsb-file=sourceware-mirror-binutils-gdb-7ab567f.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7ab567f
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source=sourceware-mirror-binutils-gdb-7ab567f
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --target=microblaze-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim    --without-zlib  --with-expat  --with-guile=no    --with-python=/usr/bin/python2  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 02:10:35 2021
==============================================================================
Report: tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-10.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gdb-7ab567f-x86_64-linux-gnu-1
 Config: tools/rtems-gdb-10.cfg
 Summary:
  GDB v7ab567f for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  7ab567f
 Release:
  1
  Sources: 1
    1: --rsb-file=sourceware-mirror-binutils-gdb-7ab567f.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7ab567f
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source=sourceware-mirror-binutils-gdb-7ab567f
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --target=microblaze-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim    --without-zlib  --with-expat  --with-guile=no    --with-python=/usr/bin/python2  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 02:15:04 2021
==============================================================================
Report: tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
 Config: tools/rtems-xilinx-binutils-2.36.cfg
 Summary:
  Binutils v7af075d for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://sources.redhat.com/binutils
 Version:
  7af075d
 Release:
  1
  Sources: 1
    1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source=sourceware-mirror-binutils-gdb-7af075d
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --target=microblaze-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --disable-lto  --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 02:15:05 2021
==============================================================================
Report: tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
 Config: tools/rtems-xilinx-binutils-2.36.cfg
 Summary:
  Binutils v7af075d for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://sources.redhat.com/binutils
 Version:
  7af075d
 Release:
  1
  Sources: 1
    1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source=sourceware-mirror-binutils-gdb-7af075d
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --target=microblaze-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --disable-lto  --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/joel/rtems-cron-6/tools/6 --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec-prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include --libdir=/home/joel/rtems-cron-6/tools/6/lib  --mandir=/home/joel/rtems-cron-6/tools/6/share/man --infodir=/home/joel/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 03:50:05 2021
==============================================================================
Report: tools/rtems-xilinx-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1
 Config: tools/rtems-xilinx-gcc-10-newlib-head.cfg
 Summary:
  GCC v348fb9d and Newlib v9069cb9 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://gcc.gnu.org/
 Version:
  348fb9d
 Release:
  1
  Sources: 6
    1: --rsb-file=gnu-mirror-gcc-348fb9d.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/348fb9d
       No checksum
    2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    3: --rsb-file=newlib-9069cb9.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/9069cb9
       No checksum
    4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
       sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
    5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
    6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
       sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
  Patches: 1
    1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-Back-port-v5-of-__gcov_info_to_gcda-to-GCC-10.patch
       No checksum
    2: https://devel.rtems.org/raw-attachment/ticket/4215/0001-nios2-Remove-custom-instruction-warnings.patch
       sha512: afd8a5e6bdcc5b75d5fbbf558bdf56ccac400521a6eec9d88cc95f6be67c481f2dbf8faa0f6ddc1e4ac7c56a84938714d80e46e9cf80ec4b8fcd739986449881
    3: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0001-LOCAL-Testsuite-builtins-tests-require-fpic.patch
       sha512: 5373e2a7ea6561263224e8da55318425eee7c91d633c45680183141093c2ea31aa7e7ee11a7ba3bd580a7edb405a162bc8904f48a354b154383fc938036a09c2
    4: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0002-LOCAL-Quick-fail-g-.dg-opt-memcpy1.C.patch
       sha512: 4bf9df22fe7be735deb2ee4353933eadf13fbee1f23254d4c870d8c99749e76eb8010cacb6143fad71c11b72063a774bd7ed050f61f7e75afe4cc3e945b83441
    5: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0003-LOCAL-For-dejagnu-static-testing-on-qemu-suppress-wa.patch
       sha512: f8b8ae98a02d1aca64e3f91dad62977e006800b5b24112927fcd02a07fe40947f2209625b3b564cffb77dc6ab6e3db072cf93b26e925fed689b8d34b3cc612bf
    6: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0004-Patch-testsuite-Add-MicroBlaze-to-target-supports-fo.patch
       sha512: f7823ba440cb3288fa372c690ffb878269915ee75be2693414338817e3bd8e9fd52545df4012b95c736d0a2fcca927bead86d5d9e70952af10b696299e3b2a4f
    7: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0005-Patch-testsuite-Update-MicroBlaze-strings-test.patch
       sha512: 1d63269e9bf6eb92e6a18a371d8c89c5a7d8735f1483d798a1e486e38d98e9b72fb95515374e8f241ddfa43e6eb90ffb876b1f066fcd3fc230d1370c34db778a
    8: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0006-Patch-testsuite-Allow-MicroBlaze-.weakext-pattern-in.patch
       sha512: bf858501c97890035b05692c028c5f6fb66f1554cff59249e6af3e9882ab9a87d47e3696aa2e7a175bb1bf5dd38ba328e42474922706b5db93d2d5daaac7b620
    9: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0007-Patch-testsuite-Add-MicroBlaze-to-check_profiling_av.patch
       No checksum
   10: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0008-Patch-microblaze-Fix-atomic-side-effects.patch
       sha512: 422a48b95dbc4370ae2a07e90a42b7a5eca1757f5396d8c660f134629fed2cc694e2409e5d5cc835d69526a7c5316c94345acfc193faaa6b1caeab45f726bf7f
   11: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0009-Patch-microblaze-Fix-atomic-boolean-return-value.patch
       sha512: 4c0b452cead51332c2987150009e7c41e4609d0ecc9cb2cecc15cc84a5861787a44adc60ecf27d8314af7d164e87a49a370c398298801043a1499f12f720084d
   12: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0010-Patch-microblaze-Fix-the-Microblaze-crash-with-msmal.patch
       sha512: 5a0a0bbc9bcb16b97893f681b18900d37c572deb97eebd9849a06e481db77c37df9d2f67f9614ba02163bf7fde2be10fb7f3b43070e1728da27d52f5a0967bc2
   13: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0011-Patch-microblaze-Added-ashrsi3_with_size_opt.patch
       No checksum
   14: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0012-Patch-microblaze-Use-bralid-for-profiler-calls.patch
       sha512: ad05cd7b91db89596394d538fd97833e374ae98b666e25ce5d379f16abe23acca106957404316d43e153375dde699fec8f385d1a6c54174f29649eb4d63604cd
   15: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0013-Patch-microblaze-Removed-moddi3-routinue.patch
       sha512: 07cde4e4f5b7bfb8cd5c89c865cc4e4c36b943b5b24035df4b18c6e9b30b9513089344105d0c05a31f2c4606ab1034c5dcc3541d6792893027ad5e3dbfb04429
   16: https://devel.rtems.org/raw-attachment/ticket/4481/0001-gcc-config-aarch64-rtems.h-Define-__USE_INIT_FINI__.patch
       No checksum
   17: https://devel.rtems.org/raw-attachment/ticket/4481/0002-config-microblaze-crti.S-Add-single-underscore-init-.patch
       sha512: bf1ec7eff0dd51d154dd0507edb085458c90a000f5a3ccefb1064147cf8fdafe0111d2094372e164976f2193c289bff9ea63dcad43555c90893272a494b7e779
 Preparation:
  build_top=$(pwd)
  gcc_source=gnu-mirror-gcc-348fb9d
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-9069cb9
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.18"
  %setup source isl -q -D -n isl-0.18
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpfr="mpfr-3.1.4"
  %setup source mpfr -q -D -n mpfr-3.1.4
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.1.0"
  %setup source gmp -q -D -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 6, RSB 4137b990e487a5fe9ad10f867c473788107c83d4, Newlib 9069cb9" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure  --prefix=/home/joel/rtems-cron-6/tools/6  --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec_prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include  --libdir=/home/joel/rtems-cron-6/tools/6/lib  --libexecdir=/home/joel/rtems-cron-6/tools/6/libexec  --mandir=/home/joel/rtems-cron-6/tools/6/share/man  --infodir=/home/joel/rtems-cron-6/tools/6/share/info  --datadir=/home/joel/rtems-cron-6/tools/6/share  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --target=microblaze-rtems6  --disable-libstdcxx-pch  --with-gnu-as --with-gnu-ld --verbose  --with-newlib  --disable-nls --without-included-gettext  --disable-win32-registry  --enable-version-specific-runtime-libs  --disable-lto  --enable-newlib-io-c99-formats    --enable-newlib-iconv  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258  --enable-threads  --disable-plugin        --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 03:50:05 2021
==============================================================================
Report: tools/rtems-xilinx-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-linux-gnu-1
 Config: tools/rtems-xilinx-gcc-10-newlib-head.cfg
 Summary:
  GCC v348fb9d and Newlib v9069cb9 for target microblaze-rtems6 on host x86_64-linux-gnu
 URL:
  http://gcc.gnu.org/
 Version:
  348fb9d
 Release:
  1
  Sources: 6
    1: --rsb-file=gnu-mirror-gcc-348fb9d.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/348fb9d
       No checksum
    2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    3: --rsb-file=newlib-9069cb9.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/9069cb9
       No checksum
    4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
       sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
    5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
       sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
    6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
       sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
  Patches: 1
    1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-Back-port-v5-of-__gcov_info_to_gcda-to-GCC-10.patch
       No checksum
    2: https://devel.rtems.org/raw-attachment/ticket/4215/0001-nios2-Remove-custom-instruction-warnings.patch
       sha512: afd8a5e6bdcc5b75d5fbbf558bdf56ccac400521a6eec9d88cc95f6be67c481f2dbf8faa0f6ddc1e4ac7c56a84938714d80e46e9cf80ec4b8fcd739986449881
    3: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0001-LOCAL-Testsuite-builtins-tests-require-fpic.patch
       sha512: 5373e2a7ea6561263224e8da55318425eee7c91d633c45680183141093c2ea31aa7e7ee11a7ba3bd580a7edb405a162bc8904f48a354b154383fc938036a09c2
    4: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0002-LOCAL-Quick-fail-g-.dg-opt-memcpy1.C.patch
       sha512: 4bf9df22fe7be735deb2ee4353933eadf13fbee1f23254d4c870d8c99749e76eb8010cacb6143fad71c11b72063a774bd7ed050f61f7e75afe4cc3e945b83441
    5: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0003-LOCAL-For-dejagnu-static-testing-on-qemu-suppress-wa.patch
       sha512: f8b8ae98a02d1aca64e3f91dad62977e006800b5b24112927fcd02a07fe40947f2209625b3b564cffb77dc6ab6e3db072cf93b26e925fed689b8d34b3cc612bf
    6: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0004-Patch-testsuite-Add-MicroBlaze-to-target-supports-fo.patch
       sha512: f7823ba440cb3288fa372c690ffb878269915ee75be2693414338817e3bd8e9fd52545df4012b95c736d0a2fcca927bead86d5d9e70952af10b696299e3b2a4f
    7: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0005-Patch-testsuite-Update-MicroBlaze-strings-test.patch
       sha512: 1d63269e9bf6eb92e6a18a371d8c89c5a7d8735f1483d798a1e486e38d98e9b72fb95515374e8f241ddfa43e6eb90ffb876b1f066fcd3fc230d1370c34db778a
    8: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0006-Patch-testsuite-Allow-MicroBlaze-.weakext-pattern-in.patch
       sha512: bf858501c97890035b05692c028c5f6fb66f1554cff59249e6af3e9882ab9a87d47e3696aa2e7a175bb1bf5dd38ba328e42474922706b5db93d2d5daaac7b620
    9: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0007-Patch-testsuite-Add-MicroBlaze-to-check_profiling_av.patch
       No checksum
   10: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0008-Patch-microblaze-Fix-atomic-side-effects.patch
       sha512: 422a48b95dbc4370ae2a07e90a42b7a5eca1757f5396d8c660f134629fed2cc694e2409e5d5cc835d69526a7c5316c94345acfc193faaa6b1caeab45f726bf7f
   11: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0009-Patch-microblaze-Fix-atomic-boolean-return-value.patch
       sha512: 4c0b452cead51332c2987150009e7c41e4609d0ecc9cb2cecc15cc84a5861787a44adc60ecf27d8314af7d164e87a49a370c398298801043a1499f12f720084d
   12: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0010-Patch-microblaze-Fix-the-Microblaze-crash-with-msmal.patch
       sha512: 5a0a0bbc9bcb16b97893f681b18900d37c572deb97eebd9849a06e481db77c37df9d2f67f9614ba02163bf7fde2be10fb7f3b43070e1728da27d52f5a0967bc2
   13: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0011-Patch-microblaze-Added-ashrsi3_with_size_opt.patch
       No checksum
   14: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0012-Patch-microblaze-Use-bralid-for-profiler-calls.patch
       sha512: ad05cd7b91db89596394d538fd97833e374ae98b666e25ce5d379f16abe23acca106957404316d43e153375dde699fec8f385d1a6c54174f29649eb4d63604cd
   15: https://raw.githubusercontent.com/Xilinx/meta-xilinx/rel-v2021.1/meta-microblaze/recipes-devtools/gcc/gcc-10/0013-Patch-microblaze-Removed-moddi3-routinue.patch
       sha512: 07cde4e4f5b7bfb8cd5c89c865cc4e4c36b943b5b24035df4b18c6e9b30b9513089344105d0c05a31f2c4606ab1034c5dcc3541d6792893027ad5e3dbfb04429
   16: https://devel.rtems.org/raw-attachment/ticket/4481/0001-gcc-config-aarch64-rtems.h-Define-__USE_INIT_FINI__.patch
       No checksum
   17: https://devel.rtems.org/raw-attachment/ticket/4481/0002-config-microblaze-crti.S-Add-single-underscore-init-.patch
       sha512: bf1ec7eff0dd51d154dd0507edb085458c90a000f5a3ccefb1064147cf8fdafe0111d2094372e164976f2193c289bff9ea63dcad43555c90893272a494b7e779
 Preparation:
  build_top=$(pwd)
  gcc_source=gnu-mirror-gcc-348fb9d
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-9069cb9
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.18"
  %setup source isl -q -D -n isl-0.18
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpfr="mpfr-3.1.4"
  %setup source mpfr -q -D -n mpfr-3.1.4
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.1.0"
  %setup source gmp -q -D -n gmp-6.1.0
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 6, RSB 4137b990e487a5fe9ad10f867c473788107c83d4, Newlib 9069cb9" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure  --prefix=/home/joel/rtems-cron-6/tools/6  --bindir=/home/joel/rtems-cron-6/tools/6/bin  --exec_prefix=/home/joel/rtems-cron-6/tools/6  --includedir=/home/joel/rtems-cron-6/tools/6/include  --libdir=/home/joel/rtems-cron-6/tools/6/lib  --libexecdir=/home/joel/rtems-cron-6/tools/6/libexec  --mandir=/home/joel/rtems-cron-6/tools/6/share/man  --infodir=/home/joel/rtems-cron-6/tools/6/share/info  --datadir=/home/joel/rtems-cron-6/tools/6/share  --build=x86_64-linux-gnu --host=x86_64-linux-gnu  --target=microblaze-rtems6  --disable-libstdcxx-pch  --with-gnu-as --with-gnu-ld --verbose  --with-newlib  --disable-nls --without-included-gettext  --disable-win32-registry  --enable-version-specific-runtime-libs  --disable-lto  --enable-newlib-io-c99-formats    --enable-newlib-iconv  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258  --enable-threads  --disable-plugin        --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-cron-6/tools/6/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/bin/microblaze-rtems6-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-cron-6/tools/6/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 03:51:00 2021
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 632414dc0f2976cc3ce0267d0c51aeb7c4de1e14 for host x86_64-linux-gnu
 URL:
  http://www.rtems.org/
 Version:
  632414dc0f2976cc3ce0267d0c51aeb7c4de1e14
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14.tar.bz2
       sha512: ibvHYZzZbRZYyLdAaIASNLx1QeeyaB3VnYGzsziKQ+9Ycjdbh7dZXeF+2Fas77JDLLB6lMKpm1gzVeGE8pl+Cg==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  RT_HOST="--host=x86_64-linux-gnu"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Sep  4 03:51:01 2021
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 4137b990e487a5fe9ad10f867c473788107c83d4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 632414dc0f2976cc3ce0267d0c51aeb7c4de1e14 for host x86_64-linux-gnu
 URL:
  http://www.rtems.org/
 Version:
  632414dc0f2976cc3ce0267d0c51aeb7c4de1e14
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14.tar.bz2
       sha512: ibvHYZzZbRZYyLdAaIASNLx1QeeyaB3VnYGzsziKQ+9Ycjdbh7dZXeF+2Fas77JDLLB6lMKpm1gzVeGE8pl+Cg==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-632414dc0f2976cc3ce0267d0c51aeb7c4de1e14
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  RT_HOST="--host=x86_64-linux-gnu"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}


More information about the build mailing list