Build Darwin: PASSED 6/rtems-riscv on x86_64-apple-darwin20.1.0
chrisj at rtems.org
chrisj at rtems.org
Thu Sep 9 20:25:13 UTC 2021
RTEMS Source Builder - Set Builder, 6 (7f7f00dbdc10)
Host: Darwin-20.1.0-x86_64-i386-64bit
Darwin mohua 20.1.0 Darwin Kernel Version 20.1.0: Sat Oct 31 00:07:11 PDT
2020; root:xnu-7195.50.7~2/RELEASE_X86_64 x86_64 i386
Build Time: 1:15:01.196094
Sizes
=====
Maximum build usage: 10.034GB
Total size: 7.585GB
Installed : 1.689GB
Sources: 5.896GB
Patches: 620.143KB
Output
======
Build Set: 6/rtems-riscv
Build Set: 6/rtems-autotools.bset
Build Set: 6/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin20.1.0-1
building: autoconf-2.69-x86_64-apple-darwin20.1.0-1
sizes: autoconf-2.69-x86_64-apple-darwin20.1.0-1: 7.502MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin20.1.0-1
building: automake-1.12.6-x86_64-apple-darwin20.1.0-1
sizes: automake-1.12.6-x86_64-apple-darwin20.1.0-1: 8.083MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
Build Sizes: usage: 8.083MB total: 5.896GB (sources: 5.896GB, patches: 620.143KB, installed 0.000B)
Build Set: Time 0:00:15.928875
Build Set: 6/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-apple-darwin20.1.0-1
building: autoconf-2.69-x86_64-apple-darwin20.1.0-1
sizes: autoconf-2.69-x86_64-apple-darwin20.1.0-1: 10.520MB (installed: 3.020MB)
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-apple-darwin20.1.0-1
building: automake-1.12.6-x86_64-apple-darwin20.1.0-1
sizes: automake-1.12.6-x86_64-apple-darwin20.1.0-1: 10.346MB (installed: 2.264MB)
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-apple-darwin20.1.0-1.xml
staging: autoconf-2.69-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-501-staging
staging: automake-1.12.6-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/rtems-source-builder.git/rtems/build/tmp/sb-501-staging
cleaning: autoconf-2.69-x86_64-apple-darwin20.1.0-1
cleaning: automake-1.12.6-x86_64-apple-darwin20.1.0-1
Build Sizes: usage: 15.805MB total: 5.901GB (sources: 5.896GB, patches: 620.143KB, installed 5.285MB)
Build Set: Time 0:00:17.736508
Build Set: Time 0:00:33.669356
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-apple-darwin20.1.0-1
building: expat-2.1.0-x86_64-apple-darwin20.1.0-1
sizes: expat-2.1.0-x86_64-apple-darwin20.1.0-1: 5.463MB (installed: 830.423KB)
cleaning: expat-2.1.0-x86_64-apple-darwin20.1.0-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin20.1.0-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-apple-darwin20.1.0-1.xml
config: devel/gmp-6.1.0.cfg
package: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
building: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
sizes: gmp-6.1.0-x86_64-apple-darwin20.1.0-1: 20.830MB (installed: 1.410MB)
cleaning: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
reporting: devel/gmp-6.1.0.cfg -> gmp-6.1.0-x86_64-apple-darwin20.1.0-1.txt
reporting: devel/gmp-6.1.0.cfg -> gmp-6.1.0-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-gdb-10.cfg
package: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1
building: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1
sizes: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1: 608.345MB (installed: 12.860MB)
cleaning: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-gdb-10.cfg -> riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-gdb-10.cfg -> riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-binutils-2.36.cfg
package: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1
building: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1
sizes: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1: 470.365MB (installed: 37.734MB)
cleaning: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-binutils-2.36.cfg -> riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-binutils-2.36.cfg -> riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-gcc-10-newlib-head.cfg
package: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1
building: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1
sizes: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1: 8.346GB (installed: 1.628GB)
cleaning: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1
reporting: tools/rtems-gcc-10-newlib-head.cfg -> riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1.txt
reporting: tools/rtems-gcc-10-newlib-head.cfg -> riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1.xml
config: tools/rtems-tools-6.cfg
package: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1
building: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1
sizes: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1: 130.546MB (installed: 9.278MB)
cleaning: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1.xml
config: devel/sis-2-1.cfg
package: sis-2.29-x86_64-apple-darwin20.1.0-1
building: sis-2.29-x86_64-apple-darwin20.1.0-1
sizes: sis-2.29-x86_64-apple-darwin20.1.0-1: 2.607MB (installed: 252.472KB)
cleaning: sis-2.29-x86_64-apple-darwin20.1.0-1
reporting: devel/sis-2-1.cfg -> sis-2.29-x86_64-apple-darwin20.1.0-1.txt
reporting: devel/sis-2-1.cfg -> sis-2.29-x86_64-apple-darwin20.1.0-1.xml
installing: expat-2.1.0-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: gmp-6.1.0-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
installing: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1 -> /opt/work/builds/tools/6
installing: sis-2.29-x86_64-apple-darwin20.1.0-1 -> /opt/work/builds/tools/6
cleaning: expat-2.1.0-x86_64-apple-darwin20.1.0-1
cleaning: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
cleaning: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1
cleaning: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1
cleaning: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1
cleaning: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1
cleaning: sis-2.29-x86_64-apple-darwin20.1.0-1
Build Sizes: usage: 10.034GB total: 7.585GB (sources: 5.896GB, patches: 620.143KB, installed 1.689GB)
installing: 6/rtems-riscv -> /opt/work/builds/tools/6
clean staging: 6/rtems-riscv
Staging Size: 5.292MB
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:11:01 2021
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:11:01 2021
==============================================================================
Report: devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.1.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.1.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/expat-2.1.0-1.cfg
Summary:
Expat XML Parser v2.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://expat.sourceforge.net/
Version:
2.1.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_1_0/expat-2.1.0.tar.gz
sha256: 823705472f816df21c8f6aa026dd162b280806838bb55b3432b0fb1fcca7eb86
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.1.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:12:45 2021
==============================================================================
Report: devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.1.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
Package: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/gmp-6.1.0.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
https://gmplib.org/
Version:
6.1.0
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:12:45 2021
==============================================================================
Report: devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.1.0.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.1.0.cfg
------------------------------------------------------------------------------
Package: gmp-6.1.0-x86_64-apple-darwin20.1.0-1
Config: devel/gmp-6.1.0.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.1.0 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
https://gmplib.org/
Version:
6.1.0
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.1.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --verbose --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --disable-shared
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.1.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:20:02 2021
==============================================================================
Report: tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-10.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gdb-10.cfg
Summary:
GDB v7ab567f for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://www.gnu.org/software/gdb/
Version:
7ab567f
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7ab567f.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7ab567f
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source=sourceware-mirror-binutils-gdb-7ab567f
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS=""
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python2 --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:20:02 2021
==============================================================================
Report: tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-10.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-10.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gdb-7ab567f-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gdb-10.cfg
Summary:
GDB v7ab567f for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://www.gnu.org/software/gdb/
Version:
7ab567f
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7ab567f.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7ab567f
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source=sourceware-mirror-binutils-gdb-7ab567f
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS=""
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python2 --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:22:38 2021
==============================================================================
Report: tools/rtems-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-binutils-2.36.cfg
Summary:
Binutils v7af075d for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://sources.redhat.com/binutils
Version:
7af075d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-7af075d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 05:22:38 2021
==============================================================================
Report: tools/rtems-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-binutils-7af075d-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-binutils-2.36.cfg
Summary:
Binutils v7af075d for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://sources.redhat.com/binutils
Version:
7af075d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-7af075d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --disable-lto --without-included-gettext --disable-win32-registry --disable-werror --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec-prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
touch $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/work/builds/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/bin/riscv-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/share/man/man1/riscv-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 06:22:26 2021
==============================================================================
Report: tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gcc-10-newlib-head.cfg
Summary:
GCC v348fb9d and Newlib v9069cb9 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://gcc.gnu.org/
Version:
348fb9d
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-348fb9d.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/348fb9d
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-9069cb9.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/9069cb9
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-Back-port-v5-of-__gcov_info_to_gcda-to-GCC-10.patch
No checksum
2: https://devel.rtems.org/raw-attachment/ticket/4215/0001-nios2-Remove-custom-instruction-warnings.patch
sha512: afd8a5e6bdcc5b75d5fbbf558bdf56ccac400521a6eec9d88cc95f6be67c481f2dbf8faa0f6ddc1e4ac7c56a84938714d80e46e9cf80ec4b8fcd739986449881
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-348fb9d
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-9069cb9
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.18"
%setup source isl -q -D -n isl-0.18
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 6, RSB 7f7f00dbdc10b2e44db13259cfa71f7a110a4215, Newlib 9069cb9" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec_prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --libexecdir=/opt/work/builds/tools/6/libexec --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --datadir=/opt/work/builds/tools/6/share --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/bin/riscv-rtems6-c++filt
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 06:22:27 2021
==============================================================================
Report: tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gcc-348fb9d-newlib-9069cb9-x86_64-apple-darwin20.1.0-1
Config: tools/rtems-gcc-10-newlib-head.cfg
Summary:
GCC v348fb9d and Newlib v9069cb9 for target riscv-rtems6 on host x86_64-apple-darwin20.1.0
URL:
http://gcc.gnu.org/
Version:
348fb9d
Release:
1
Sources: 6
1: --rsb-file=gnu-mirror-gcc-348fb9d.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/348fb9d
No checksum
2: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
3: --rsb-file=newlib-9069cb9.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/9069cb9
No checksum
4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
5: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2
sha512: 3c82aeab9c1596d4da8afac2eec38e429e84f3211e1a572cf8fd2b546493c44c039b922a1133eaaa48bd7f3e11dbe795a384e21ed95cbe3ecc58d7ac02246117
6: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2
sha512: 51066066ff2c12ed2198605ecf68846b0c96b548adafa5b80e0c786d0df488411a5e8973358fce7192dc977ad4e68414cf14500e3c39746de62465eb145bb819
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-Back-port-v5-of-__gcov_info_to_gcda-to-GCC-10.patch
No checksum
2: https://devel.rtems.org/raw-attachment/ticket/4215/0001-nios2-Remove-custom-instruction-warnings.patch
sha512: afd8a5e6bdcc5b75d5fbbf558bdf56ccac400521a6eec9d88cc95f6be67c481f2dbf8faa0f6ddc1e4ac7c56a84938714d80e46e9cf80ec4b8fcd739986449881
Preparation:
build_top=$(pwd)
gcc_source=gnu-mirror-gcc-348fb9d
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-9069cb9
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.18"
%setup source isl -q -D -n isl-0.18
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpfr="mpfr-3.1.4"
%setup source mpfr -q -D -n mpfr-3.1.4
%setup patch mpfr -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpfr
ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
source_dir_mpc="mpc-1.0.3"
%setup source mpc -q -D -n mpc-1.0.3
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
source_dir_gmp="gmp-6.1.0"
%setup source gmp -q -D -n gmp-6.1.0
%setup patch gmp -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/gmp
ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
echo "RTEMS 6, RSB 7f7f00dbdc10b2e44db13259cfa71f7a110a4215, Newlib 9069cb9" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "riscv-rtems6" -o "x86_64-apple-darwin20.1.0" == "riscv-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
# Cross build
CC=$(echo "x86_64-apple-darwin20.1.0-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-apple-darwin20.1.0-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/opt/work/builds/tools/6 --bindir=/opt/work/builds/tools/6/bin --exec_prefix=/opt/work/builds/tools/6 --includedir=/opt/work/builds/tools/6/include --libdir=/opt/work/builds/tools/6/lib --libexecdir=/opt/work/builds/tools/6/libexec --mandir=/opt/work/builds/tools/6/share/man --infodir=/opt/work/builds/tools/6/share/info --datadir=/opt/work/builds/tools/6/share --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --target=riscv-rtems6 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -j 4 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/opt/work/builds/tools/6/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/bin/riscv-rtems6-c++filt
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/opt/work/builds/tools/6/share/man/man3/*ffi*
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 06:23:47 2021
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 40a7058bd4d7681ca6be7a14f09a1275ea4fbde4 for host x86_64-apple-darwin20.1.0
URL:
http://www.rtems.org/
Version:
40a7058bd4d7681ca6be7a14f09a1275ea4fbde4
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4.tar.bz2
sha512: nlwNKLP2UXRMRfK0SU0Bpd+9sOvRoRaXRRTj0lzx9jkqGMwwU4lB19uLhTnH88u1jGOrhVSkNunIHvbi9SayAg==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
RT_HOST="--host=x86_64-apple-darwin20.1.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 06:23:48 2021
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 40a7058bd4d7681ca6be7a14f09a1275ea4fbde4 for host x86_64-apple-darwin20.1.0
URL:
http://www.rtems.org/
Version:
40a7058bd4d7681ca6be7a14f09a1275ea4fbde4
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4.tar.bz2
sha512: nlwNKLP2UXRMRfK0SU0Bpd+9sOvRoRaXRRTj0lzx9jkqGMwwU4lB19uLhTnH88u1jGOrhVSkNunIHvbi9SayAg==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-40a7058bd4d7681ca6be7a14f09a1275ea4fbde4
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
RT_HOST="--host=x86_64-apple-darwin20.1.0"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/opt/work/builds/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 06:23:57 2021
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.29-x86_64-apple-darwin20.1.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.29 for host x86_64-apple-darwin20.1.0
Version:
2.29
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.29.tar.bz2
sha512: 50283cdcd47c591a41f3617438286ab8b2a16ffc600fcb8b4f45a79db271f8ab310502d30fcb3f7daf8a9a3bb6326488d0b11ae635d482878aa616c9ce22a392
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.29
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.29
ac_prefix=/opt/work/builds/tools/6
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "riscv-rtems6" != "" ; then
SIS_PREFIX="riscv-rtems6-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
make -j 4 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/opt/work/builds/tools/6/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.29
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 10 06:23:57 2021
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 7f7f00dbdc10b2e44db13259cfa71f7a110a4215
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.29-x86_64-apple-darwin20.1.0-1
Config: devel/sis-2-1.cfg
Summary:
Sis v2.29 for host x86_64-apple-darwin20.1.0
Version:
2.29
Release:
1
Sources: 1
1: https://git.rtems.org/sis/snapshot/sis-2.29.tar.bz2
sha512: 50283cdcd47c591a41f3617438286ab8b2a16ffc600fcb8b4f45a79db271f8ab310502d30fcb3f7daf8a9a3bb6326488d0b11ae635d482878aa616c9ce22a392
Patches: 0
Preparation:
build_top=$(pwd)
%setup source sis -q -n sis-2.29
cd ${build_top}
Build:
build_top=$(pwd)
cd sis-2.29
ac_prefix=/opt/work/builds/tools/6
if test "x86_64-apple-darwin20.1.0" != "x86_64-apple-darwin20.1.0" ; then
CFLAGS_FOR_BUILD="-g -O2 -Wall"
fi
export CFLAGS CFLAGS_FOR_BUILD CC
if test "riscv-rtems6" != "" ; then
SIS_PREFIX="riscv-rtems6-"
fi
CFLAGS="$SB_CFLAGS" ./configure --build=x86_64-apple-darwin20.1.0 --host=x86_64-apple-darwin20.1.0 --program-prefix="$SIS_PREFIX" --prefix=${ac_prefix}
make -j 4 all
unset CFLAGS_FOR_BUILD
cd ${build_top}
Install:
build_top=$(pwd)
export PATH="/opt/work/builds/tools/6/bin:${PATH}"
/bin/rm -rf $SB_BUILD_ROOT
cd sis-2.29
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list