[rtems-test] aarch64/xilinx_zynqmp_lp64_zu3eg: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:572 Failed:4 Timeout:0 Test-Too-long:0 Invalid:0 Wrong:0
chrisj at rtems.org
chrisj at rtems.org
Sun Sep 19 03:05:23 UTC 2021
Testing time : 2:54:47.319945
Average test time: 0:00:17.957740
Host
====
FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
Configuration
=============
Version: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
Summary
=======
Passed: 572
Failed: 4
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 584
Failures:
malloc04.exe
psxconfig01.exe
spintrcritical22.exe
sptimecounter01.exe
User Input:
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /opt/work/rtems/6/bin/rtems-test --rtems-bsp=xilinx_zynqmp_lp64_zu3eg --log=zynqmp.txt --mail --to=build at rtems.org --from=chrisj at rtems.org build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/
Host: FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64
Python: 3.7.6 (default, Mar 3 2020, 01:18:14) [Clang 8.0.1 (tags/RELEASE_801/final 366581)]
Host: FreeBSD-12.1-RELEASE-p2-amd64-64bit-ELF (FreeBSD ruru 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64)
[ 1/584] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: dhrystone.exe
<<skipping passes>>
[100/584] p:96 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: malloc04.exe
Result: failed
Time: 0:00:13.286087 malloc04.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/libtests/malloc04.exe.img
=> target pretest: rtems-zynqmp-lp64-mkimg build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/libtests/malloc04.exe
=> Image: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/libtests/malloc04.exe
=> Image Name: RTEMS
=> Created: Sun Sep 19 10:38:05 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 44722 Bytes = 43.67 KiB = 0.04 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/libtests/malloc04.exe.img
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] MMC: mmc at ff160000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.151 (403 ms)
] Hit any key to stop autoboot: 4 3 2 1 0
] 145 bytes read in 11 ms (12.7 KiB/s)
] Loaded environment from uEnv.txt
] Importing environment from SD ...
] Running uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *####
] 28.3 KiB/s
] done
] Bytes transferred = 44786 (aef2 hex)
] ## Booting kernel from Legacy Image at 10800000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 44722 Bytes = 43.7 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 10000000) ...
]
]
=> test start: MALLOC 4
] *** BEGIN OF TEST MALLOC 4 ***
] *** TEST VERSION: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
] No sbrk() amount
] Misaligned extend
] sbrk(512)
] Not enough sbrk() space
] sbrk(1024)
] Valid heap extend
] sbrk(256)
] ../../../testsuites/libtests/malloc04/init.c: 149 sbrk_count == 0
]
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] RTEMS tools: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
]
] --------------------------------------------------------------------------------
=> target start detected
] Xilinx Zynq MP First Stage Boot Loader (TE modified)
] Release 2019.2 Jun 2 2020 - 10:50:36
] Device Name: XCZU2CG
]
] --------------------------------------------------------------------------------
] TE0802 TE_XFsbl_BoardInit_Custom
] Reset Complete
]
] --------------------------------------------------------------------------------
] NOTICE: ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
] NOTICE: BL31: Secure code at 0x0
] NOTICE: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
] NOTICE: BL31: Built : 20:31:20, May 26 2020
] PMUFW: v1.1
[101/584] p:96 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: malloctest.exe
<<skipping passes>>
[183/584] p:175 f:1 u:3 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: psxconfig01.exe
Result: failed
Time: 0:00:13.862717 psxconfig01.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/psxtests/psxconfig01.exe.img
=> target pretest: rtems-zynqmp-lp64-mkimg build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/psxtests/psxconfig01.exe
=> Image: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/psxtests/psxconfig01.exe
=> Image Name: RTEMS
=> Created: Sun Sep 19 11:01:42 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 56793 Bytes = 55.46 KiB = 0.05 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/psxtests/psxconfig01.exe.img
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] MMC: mmc at ff160000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.151 (392 ms)
] Hit any key to stop autoboot: 4 3 2 1 0
] 145 bytes read in 11 ms (12.7 KiB/s)
] Loaded environment from uEnv.txt
] Importing environment from SD ...
] Running uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *####
] 28.3 KiB/s
] done
] Bytes transferred = 56857 (de19 hex)
] ## Booting kernel from Legacy Image at 10800000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 56793 Bytes = 55.5 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 10000000) ...
]
]
=> test start: PSXCONFIG 1
] *** BEGIN OF TEST PSXCONFIG 1 ***
] *** TEST VERSION: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
] used blocks = 1, largest used block = 10320, used space = 10320
] free blocks = 1, largest free block = 168880, free space = 168880
]
] rtems_region_create FAILED -- expected (RTEMS_SUCCESSFUL) got (RTEMS_INVALID_SIZE)
]
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] RTEMS tools: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
]
] --------------------------------------------------------------------------------
=> target start detected
] Xilinx Zynq MP First Stage Boot Loader (TE modified)
] Release 2019.2 Jun 2 2020 - 10:50:36
] Device Name: XCZU2CG
]
] --------------------------------------------------------------------------------
] TE0802 TE_XFsbl_BoardInit_Custom
] Reset Complete
]
] --------------------------------------------------------------------------------
] NOTICE: ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
] NOTICE: BL31: Secure code at 0x0
] NOTICE: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
] NOTICE: BL31: Built : 20:31:20, May 26 2020
] PMUFW: v1.1
[184/584] p:175 f:2 u:3 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: psxconfstr.exe
<<skipping passes>>
[477/584] p:466 f:2 u:5 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: spintrcritical22.exe
Result: failed
Time: 0:00:21.341040 spintrcritical22.exe
=> target exe filter: find:\.exe subst:.exe.img -> build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/sptests/spintrcritical22.exe.img
=> target pretest: rtems-zynqmp-lp64-mkimg build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/sptests/spintrcritical22.exe
=> Image: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/sptests/spintrcritical22.exe
=> Image Name: RTEMS
=> Created: Sun Sep 19 12:26:18 2021
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 57163 Bytes = 55.82 KiB = 0.05 MiB
=> Load Address: 10000000
=> Entry Point: 10000000
=> tftp: exe: build/aarch64/xilinx_zynqmp_lp64_zu3eg/testsuites/sptests/spintrcritical22.exe.img
]
]
] U-Boot 2019.01 (May 26 2020 - 20:29:14 +0000)
]
] Board: Xilinx ZynqMP
] DRAM: 1023 MiB
] EL Level: EL2
] Chip ID: zu2cg
] MMC: mmc at ff160000: 0
] In: serial at ff000000
] Out: serial at ff000000
] Err: serial at ff000000
] Board: Xilinx ZynqMP
] Bootmode: SD_MODE
] Reset reason: SOFT
] Net: ZYNQ GEM: ff0e0000, phyaddr 1, interface rgmii-id
]
] Warning: ethernet at ff0e0000 using MAC address from ROM
] eth0: ethernet at ff0e0000
] U-BOOT for petalinux
]
] ethernet at ff0e0000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.151 (370 ms)
] Hit any key to stop autoboot: 4 3 2 1 0
] 145 bytes read in 12 ms (11.7 KiB/s)
] Loaded environment from uEnv.txt
] Importing environment from SD ...
] Running uenvcmd ...
] Using ethernet at ff0e0000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.151
] Filename 'zynqmp/rtems.img'.
] Load address: 0x10800000
] Loading: *####
] 31.3 KiB/s
] done
] Bytes transferred = 57227 (df8b hex)
] ## Booting kernel from Legacy Image at 10800000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 57163 Bytes = 55.8 KiB
] Load Address: 10000000
] Entry Point: 10000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 10000000) ...
]
]
=> test start: SPINTRCRITICAL 22
] *** BEGIN OF TEST SPINTRCRITICAL 22 ***
] *** TEST VERSION: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
] A:SPINTRCRITICAL 22
] S:Platform:RTEMS
] S:Compiler:10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
] S:Version:6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] S:BSP:xilinx_zynqmp_lp64_zu3eg
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:PMPL21xdDs7RlkUDVA3baKzS7eI1Em30ugEUDiE_lPw=
] S:RTEMS_DEBUG:1
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:InterruptSemaphoreObtain
] F:0:0:UI1:init.c:145:8 == 4
] E:InterruptSemaphoreObtain:N:1:F:1:D:7.905261
] Z:SPINTRCRITICAL 22:C:1:N:1:F:1:D:7.908714
] Y:ReportHash:SHA256:gePPvViv2_LhJYm6eXnwTtpeKUxiJb8puzkVyb24OlM=
]
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.9e30a716a3254f24635972657b8398c35daa014e
] RTEMS tools: 10.3.1 20210409 (RTEMS 6, RSB c938bd7cbe16bd03d3b382f2d7cfee6a86aa9424, Newlib 0c0f3df)
]
] --------------------------------------------------------------------------------
=> target start detected
] Xilinx Zynq MP First Stage Boot Loader (TE modified)
] Release 2019.2 Jun 2 2020 - 10:50:36
] Device Name: XCZU2CG
]
] --------------------------------------------------------------------------------
] TE0802 TE_XFsbl_BoardInit_Custom
] Reset Complete
]
] --------------------------------------------------------------------------------
] NOTICE: ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
] NOTICE: BL31: Secure code at 0x0
] NOTICE: BL31: Non secure code at 0x8000000
] NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
] NOTICE: BL31: Built : 20:31:20, May 26 2020
] PMUFW: v1.1
[478/584] p:466 f:3 u:5 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: spintrcritical23.exe
<<skipping passes>>
[584/584] p:571 f:4 u:5 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | aarch64/xilinx_zynqmp_lp64_zu3eg: ts-validation-1.exe
Passed: 572
Failed: 4
User Input: 5
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 584
Failures:
malloc04.exe
psxconfig01.exe
spintrcritical22.exe
sptimecounter01.exe
User Input:
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Average test time: 0:00:17.957740
Testing time : 2:54:47.319945
More information about the build
mailing list