[rtems-test] mipstx39/jmr3904: : Passed:1 Failed:0 Timeout:0 Test-Too-long:0 Invalid:599 Wrong:0
OAR Tester
rtems-tester at oarcorp.com
Tue Aug 30 04:12:45 UTC 2022
Testing time : 0:00:35.379984
Average test time: 0:00:00.058966
Host
====
Linux-4.18.0-358.el8.x86_64-x86_64-with-centos-8 (Linux VM-CentOSStream8.rtems.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64 x86_64)
Configuration
=============
Version: Not present in test
Build : Not present in test
Tools : Not present in test
Summary
=======
Passed: 1
Failed: 0
User Input: 0
Expected Fail: 0
Indeterminate: 0
Benchmark: 0
Timeout: 0
Test too long: 0
Invalid: 599
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 600
Invalid:
sptasknopreempt01.exe
block05.exe
block15.exe
sp08.exe
paranoia.exe
psxkey09.exe
whetstone.exe
psxtmrwlock01.exe
termios.exe
fsdosfsname02.exe
psx13.exe
spversion01.exe
spclock_err02.exe
mrfs_fsrename.exe
block16.exe
mimfs_fspermission.exe
mdosfs_fserror.exe
sptimer_err02.exe
termios06.exe
sp32.exe
psxglobalcon02.exe
tar01.exe
spfatal10.exe
heapwalk.exe
psxclock01.exe
sp71.exe
psxtmmutex07.exe
ts-userext.exe
psxkey10.exe
ts-validation-timecounter-1.exe
psxtmcond02.exe
tm31.exe
tftpfs.exe
psxcond01.exe
block13.exe
tm27.exe
psxclockrealtime01.exe
psxautoinit01.exe
sp47.exe
mdosfs_fsstatvfs.exe
jffs2_fstime.exe
psxtmcond06.exe
ts-validation-acfg-0.exe
imfs_fslink.exe
sp74.exe
mrfs_fstime.exe
spcbssched02.exe
sptimespec01.exe
sparsedisk01.exe
tm19.exe
psxualarm.exe
psxtmthread01.exe
tm06.exe
rbheap01.exe
spconfig02.exe
spcontext01.exe
sp19.exe
dl07.exe
psxstrsignal01.exe
spsem_err02.exe
spmsgq_err01.exe
block04.exe
cdtest.exe
spglobalcon02.exe
psxid01.exe
dumpbuf01.exe
psxtmclocknanosleep01.exe
psxfilelock01.exe
psxtmmqrcvblock01.exe
termios01.exe
sp59.exe
getentropy01.exe
psxtmbarrier03.exe
psxtmsem02.exe
psx15.exe
complex.exe
psxstat.exe
psxitimer.exe
sptimecounter03.exe
mimfs_fsscandir01.exe
imfs_fssymlink.exe
ttest01.exe
sp03.exe
dl01.exe
spmsgq_err02.exe
stringto01.exe
sprmsched02.exe
devnullfatal01.exe
mdosfs_fsrdwr.exe
sp24.exe
mimfs_fssymlink.exe
psxsignal08.exe
pwdgrp01.exe
psxstack01.exe
psximfs01.exe
psxtmmq01.exe
exit02.exe
spcache01.exe
jffs2_fsrdwr.exe
psxtmsem04.exe
psxpasswd02.exe
sprmsched01.exe
sperror02.exe
psxrwlock01.exe
mimfs_fstime.exe
sptls04.exe
psxtmthread06.exe
psxtmkey02.exe
spconsole01.exe
sp40.exe
psxtmcleanup01.exe
sptask_err02.exe
psxalarm01.exe
top.exe
spcbssched01.exe
psxconfstr.exe
mimfs_fslink.exe
psxtmthread05.exe
sp20.exe
psxtmbarrier01.exe
spcpucounter01.exe
mouse01.exe
spsimplesched03.exe
sp49.exe
psxthreadname01.exe
sp75.exe
psxcancel.exe
psx10.exe
spfatal33.exe
sperror01.exe
psxtmmutexattr01.exe
sp77.exe
psxconcurrency01.exe
psxtmthread04.exe
pwdgrp02.exe
tm25.exe
psx11.exe
spedfsched04.exe
psxtmrwlock07.exe
fsclose01.exe
spfatal14.exe
tm08.exe
psxtmsem03.exe
speventsystem01.exe
psxstack02.exe
ts-validation-timecounter-0.exe
fileio.exe
tmtimer01.exe
sp27.exe
psxtmmutex04.exe
jffs2_fssymlink.exe
psx03.exe
psxcancel01.exe
psxautoinit02.exe
block03.exe
rhtaskswitch.exe
psxtmmutex05.exe
termios04.exe
ts-validation-tls-1.exe
psx02.exe
psxtmsleep01.exe
psxclassic01.exe
spatomic01.exe
sp07.exe
tm35.exe
spfifo01.exe
termios07.exe
psxfile02.exe
mimfs_fsrename.exe
psxsignal03.exe
rcxx01.exe
spprintk.exe
linpack.exe
spchain.exe
sp68.exe
psxsem01.exe
psxmutexattr01.exe
dl04.exe
sp60.exe
sp45.exe
mrfs_fsrdwr.exe
sp72.exe
spprivenv01.exe
sp34.exe
irqs01.exe
block17.exe
spedfsched02.exe
spstdthreads01.exe
sha.exe
ts-validation-one-cpu-0.exe
md501.exe
psxkey02.exe
fsnofs01.exe
tm11.exe
sp55.exe
termios09.exe
mrfs_fssymlink.exe
tm15.exe
sp15.exe
ts-validation-one-cpu-1.exe
spfatal15.exe
tar02.exe
sp29.exe
spunlimited01.exe
psxsignal05.exe
tztest.exe
psxgetattrnp01.exe
sptask_err03.exe
psxtimer01.exe
psxtmthread03.exe
psxaio02.exe
psxspin01.exe
fsimfsconfig03.exe
bspcmdline01.exe
imfs_fspatheval.exe
tm24.exe
mathf.exe
spfreechain01.exe
jffs2_fspatheval.exe
spstkalloc03.exe
psxtime.exe
fsdosfswrite01.exe
fsdosfssync01.exe
tmcontext01.exe
psxcleanup.exe
psxtmcond04.exe
psxkey05.exe
sp37.exe
ts-terminate.exe
capture01.exe
tm17.exe
spfifo05.exe
psxinttypes01.exe
malloc02.exe
psxtmsem05.exe
spclock_err01.exe
psxtmmutex02.exe
fsdosfsformat01.exe
sp23.exe
psx05.exe
psxmsgq01.exe
mrfs_fserror.exe
ts-performance-no-clock-0.exe
ts-validation-acfg-1.exe
spport_err01.exe
psxtmsem01.exe
block02.exe
tm01.exe
psxchroot01.exe
sp63.exe
spprofiling01.exe
psxtmrwlock05.exe
uid01.exe
psxtmcond05.exe
tmfine01.exe
mdosfs_fstime.exe
malloctest.exe
psxmmap01.exe
cpuuse.exe
sp62.exe
psxdevctl01.exe
spfatal28.exe
ticker.exe
block07.exe
sp31.exe
psxmsgq03.exe
psxmsgq02.exe
mimfs_fsrdwr.exe
sp41.exe
tm36.exe
spfatal12.exe
imfs_fstime.exe
jffs2_fslink.exe
termios03.exe
malloc03.exe
psxsignal02.exe
sp65.exe
psxobj01.exe
psxfile01.exe
psxeintr_join.exe
spinternalerror01.exe
termios08.exe
mdosfs_fspatheval.exe
fsimfsconfig01.exe
spsem03.exe
spfatal05.exe
psxtmrwlock03.exe
tm13.exe
psxkey06.exe
sppartition_err01.exe
jffs2_fspermission.exe
sp11.exe
sp17.exe
dl09.exe
spedfsched01.exe
spfatal01.exe
sp70.exe
psxfchx01.exe
sptimecounter01.exe
fsrofs01.exe
record01.exe
psxglobalcon01.exe
psxtmkey01.exe
psxtmonce01.exe
ts-validation-non-smp.exe
sprbtree01.exe
spthreadq01.exe
sppagesize.exe
spfatal30.exe
psx04.exe
fsrfsbitmap01.exe
psxtmmutex03.exe
mrfs_fspermission.exe
tm33.exe
tmonetoone.exe
psxtmmqrcvblock02.exe
sp56.exe
tm28.exe
jffs2_fserror.exe
psx07.exe
tm07.exe
fsjffs2gc01.exe
sp33.exe
sptask_err01.exe
sp76.exe
i2c01.exe
nsecs.exe
tm20.exe
sptls03.exe
psxtmmutex06.exe
spconfig01.exe
psxtmrwlock06.exe
psx01.exe
spstkalloc.exe
sp12.exe
spheapprot.exe
spsyslock01.exe
psxtmnanosleep02.exe
psxtmclocknanosleep02.exe
spsimplesched01.exe
psxrdwrv.exe
psxtmthread02.exe
spsignal_err01.exe
fsimfsgeneric01.exe
spmkdir.exe
spwkspace.exe
mrfs_fslink.exe
psxgetrusage01.exe
sp2038.exe
spsimplesched02.exe
sp25.exe
sp35.exe
sptask_err04.exe
rhilatency.exe
psxkey07.exe
sp43.exe
dl06.exe
sp18.exe
spfatal09.exe
jffs2_fsscandir01.exe
tm22.exe
imfs_fsrdwr.exe
sp01.exe
spi01.exe
psxfatal02.exe
ts-unit-no-clock-0.exe
libfdt01.exe
dl02.exe
sp26.exe
psxfenv01.exe
stackchk.exe
tm09.exe
sptimecounter02.exe
spfatal11.exe
psx14.exe
spfifo04.exe
sp57.exe
block12.exe
tm30.exe
stackchk02.exe
psxndbm01.exe
spcpuset01.exe
tm14.exe
mrfs_fsfpathconf.exe
psxtmcond01.exe
sp13.exe
iostream.exe
rtmonuse.exe
spstkalloc02.exe
psxfatal01.exe
psxtmthreadattr01.exe
sptls01.exe
psxkey01.exe
spratemon_err01.exe
spntp01.exe
putenvtest.exe
psxshm02.exe
psxtmclocknanosleep03.exe
psxaio01.exe
ts-fatal-too-large-tls-size.exe
block09.exe
psxbarrier01.exe
spregion_err01.exe
unlimited.exe
psxtmcond09.exe
mdosfs_fsscandir01.exe
sp21.exe
psxkey03.exe
mimfs_fserror.exe
psxpipe01.exe
psxtimer_face01.exe
ts-validation-io-kernel.exe
psxconfig01.exe
spcbssched03.exe
sp50.exe
psxtmcond10.exe
psxtmbarrierattr01.exe
deviceio01.exe
block11.exe
psxmsgq04.exe
sp69.exe
spclock_todhook01.exe
spfifo02.exe
spthread01.exe
sp42.exe
sp02.exe
dl10.exe
spfatal29.exe
spfatal31.exe
psxshm01.exe
sp30.exe
monitor.exe
sp14.exe
tm10.exe
spmountmgr01.exe
rhsemshuffle.exe
ts-validation-1.exe
psxsignal06.exe
fsfseeko01.exe
block10.exe
termios05.exe
spsize.exe
tm03.exe
rhtaskpreempt.exe
exit03.exe
psxtmbarrier04.exe
sp52.exe
sp06.exe
sptimecounter04.exe
spthreadlife01.exe
devfs01.exe
spsem_err01.exe
ts-validation-intr.exe
psxcleanup01.exe
defaultconfig01.exe
psxsignal07.exe
spobjgetnext.exe
psxftw01.exe
ts-validation-tls-0.exe
termios10.exe
imfs_fspermission.exe
fsimfsconfig02.exe
psx06.exe
tm05.exe
devfs04.exe
rhmlatency.exe
psxtmmutex01.exe
sptimerserver01.exe
spedfsched03.exe
psxcleanup02.exe
psx08.exe
psx09.exe
sp46.exe
sp54.exe
tar03.exe
base_sp.exe
dl03.exe
rhdeadlockbrk.exe
spintr_err01.exe
spmisc01.exe
spfatal03.exe
psxenosys.exe
sp48.exe
fsdosfsname01.exe
spmutex01.exe
psxsignal04.exe
spevent_err03.exe
spsysinit01.exe
block08.exe
spfatal32.exe
mimfs_fspatheval.exe
block14.exe
stackchk01.exe
spfifo03.exe
dhrystone.exe
mathl.exe
spassoc01.exe
math.exe
psxtimer02.exe
tm02.exe
sptls02.exe
psx16.exe
spscheduler01.exe
sppps01.exe
spwatchdog.exe
ttest02.exe
tmck.exe
spcxx01.exe
tm21.exe
shell01.exe
sp66.exe
spstdc17.exe
psxkey08.exe
tm16.exe
splinkersets01.exe
sppercpudata01.exe
psxcond02.exe
tm34.exe
sp73.exe
psxtmcond03.exe
sp27a.exe
tm12.exe
sp04.exe
spfatal34.exe
tm18.exe
sp53.exe
flashdisk01.exe
psx12.exe
psxtmbarrier02.exe
spsem02.exe
psxkey04.exe
sp67.exe
sp51.exe
sperror03.exe
imfs_fsscandir01.exe
spmrsp01.exe
psxreaddir.exe
mrfs_fspatheval.exe
malloc04.exe
tm23.exe
block06.exe
ts-validation-no-clock-0.exe
sp22.exe
exit01.exe
record02.exe
utf8proc01.exe
sp44.exe
dl08.exe
sp16.exe
crypt01.exe
spqreslib.exe
psxtmsleep02.exe
tm32.exe
spnsext01.exe
capture.exe
spsem01.exe
imfs_fserror.exe
tm26.exe
psxonce01.exe
psxsysconf.exe
sp58.exe
sp05.exe
newlib01.exe
spglobalcon01.exe
spinternalerror02.exe
psxclock.exe
spextensions01.exe
sp64.exe
psxaio03.exe
psxpasswd01.exe
psxsignal01.exe
ofw01.exe
psxmount.exe
psxtmcond08.exe
psxtimes01.exe
psximfs02.exe
hello.exe
termios11.exe
ts-validation-cache.exe
mrfs_fsscandir01.exe
psxtmrwlock02.exe
spfatal04.exe
ts-validation-0.exe
tm29.exe
psxtmcond07.exe
psxtmrwlock04.exe
psxtmnanosleep01.exe
speventtransient01.exe
dl05.exe
block01.exe
spstkalloc04.exe
sp38.exe
termios02.exe
ts-fatal-init-task-construct-failed.exe
monitor02.exe
psxusleep.exe
sptimer_err01.exe
fsbdpart01.exe
tm04.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=jmr3904 --log=run-jmr3904.log --use-gitconfig --mail .
Host: Linux VM-CentOSStream8.rtems.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64
Python: 2.7.18 (default, Jun 24 2022, 18:01:55) [GCC 8.5.0 20210514 (Red Hat 8.5.0-13)]
Host: Linux-4.18.0-358.el8.x86_64-x86_64-with-centos-8 (Linux VM-CentOSStream8.rtems.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64 x86_64)
[ 1/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: dhrystone.exe
Result: invalid
Time: 0:00:00.273883 dhrystone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019160
=> Loading section .init, size 0x48 lma ffffffff880191d0
=> Loading section .fini, size 0x30 lma ffffffff88019218
=> Loading section .ctors, size 0x8 lma ffffffff88019248
=> Loading section .dtors, size 0x8 lma ffffffff88019250
=> Loading section .rdata, size 0x26f0 lma ffffffff88019260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b950
=> Loading section .data, size 0x5b8 lma ffffffff8801b968
=> Start address ffffffff88000004
=> Transfer rate: 915648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 2/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: linpack.exe
Result: invalid
Time: 0:00:00.263379 linpack.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a700
=> Loading section .init, size 0x48 lma ffffffff8801a770
=> Loading section .fini, size 0x30 lma ffffffff8801a7b8
=> Loading section .ctors, size 0x8 lma ffffffff8801a7e8
=> Loading section .dtors, size 0x8 lma ffffffff8801a7f0
=> Loading section .rdata, size 0x2468 lma ffffffff8801a800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cc68
=> Loading section .data, size 0x5b8 lma ffffffff8801cc80
=> Start address ffffffff88000004
=> Transfer rate: 954752 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 3/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: whetstone.exe
Result: invalid
Time: 0:00:00.526774 whetstone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x199a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880199a0
=> Loading section .init, size 0x48 lma ffffffff88019a10
=> Loading section .fini, size 0x30 lma ffffffff88019a58
=> Loading section .ctors, size 0x8 lma ffffffff88019a88
=> Loading section .dtors, size 0x8 lma ffffffff88019a90
=> Loading section .rdata, size 0x2320 lma ffffffff88019aa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bdc0
=> Loading section .data, size 0x5c8 lma ffffffff8801bdd8
=> Start address ffffffff88000004
=> Transfer rate: 924864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 4/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid
Time: 0:00:00.260810 fsbdpart01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x226d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880226d0
=> Loading section .init, size 0x48 lma ffffffff88022740
=> Loading section .fini, size 0x30 lma ffffffff88022788
=> Loading section .ctors, size 0x8 lma ffffffff880227b8
=> Loading section .dtors, size 0x8 lma ffffffff880227c0
=> Loading section .rdata, size 0x28b8 lma ffffffff880227d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025088
=> Loading section .data, size 0x60c lma ffffffff880250a0
=> Start address ffffffff88000004
=> Transfer rate: 1226016 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 5/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsclose01.exe
Result: invalid
Time: 0:00:00.506278 fsclose01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a6a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a6a0
=> Loading section .init, size 0x48 lma ffffffff8801a710
=> Loading section .fini, size 0x30 lma ffffffff8801a758
=> Loading section .ctors, size 0x8 lma ffffffff8801a788
=> Loading section .dtors, size 0x8 lma ffffffff8801a790
=> Loading section .rdata, size 0x2398 lma ffffffff8801a7a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cb38
=> Loading section .data, size 0x5c4 lma ffffffff8801cb50
=> Start address ffffffff88000004
=> Transfer rate: 952416 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 6/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid
Time: 0:00:00.251665 fsdosfsformat01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2a960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8802a960
=> Loading section .init, size 0x48 lma ffffffff8802a9d0
=> Loading section .fini, size 0x30 lma ffffffff8802aa18
=> Loading section .ctors, size 0x8 lma ffffffff8802aa48
=> Loading section .dtors, size 0x8 lma ffffffff8802aa50
=> Loading section .rdata, size 0x2b24 lma ffffffff8802aa60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802d588
=> Loading section .data, size 0x5e8 lma ffffffff8802d5a0
=> Start address ffffffff88000004
=> Transfer rate: 1498080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 7/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid
Time: 0:00:00.512968 fsdosfsname01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x31e60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88031e60
=> Loading section .init, size 0x48 lma ffffffff88031ed0
=> Loading section .fini, size 0x30 lma ffffffff88031f18
=> Loading section .ctors, size 0x8 lma ffffffff88031f48
=> Loading section .dtors, size 0x8 lma ffffffff88031f50
=> Loading section .rdata, size 0x121724 lma ffffffff88031f60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88153688
=> Loading section .data, size 0x2c4e8 lma ffffffff881536a0
=> Start address ffffffff88000004
=> Transfer rate: 12573664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 8/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid
Time: 0:00:00.510175 fsdosfsname02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x25620 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88025620
=> Loading section .init, size 0x48 lma ffffffff88025690
=> Loading section .fini, size 0x30 lma ffffffff880256d8
=> Loading section .ctors, size 0x8 lma ffffffff88025708
=> Loading section .dtors, size 0x8 lma ffffffff88025710
=> Loading section .rdata, size 0x2900 lma ffffffff88025720
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028020
=> Loading section .data, size 0x600 lma ffffffff88028038
=> Start address ffffffff88000004
=> Transfer rate: 1323392 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 9/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:4 W:0 | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid
Time: 0:00:00.254086 fsdosfssync01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x265c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880265c0
=> Loading section .init, size 0x48 lma ffffffff88026630
=> Loading section .fini, size 0x30 lma ffffffff88026678
=> Loading section .ctors, size 0x8 lma ffffffff880266a8
=> Loading section .dtors, size 0x8 lma ffffffff880266b0
=> Loading section .rdata, size 0x27b8 lma ffffffff880266c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028e78
=> Loading section .data, size 0x610 lma ffffffff88028e90
=> Start address ffffffff88000004
=> Transfer rate: 1352896 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 10/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:4 W:0 | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid
Time: 0:00:00.255927 fsdosfswrite01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027900
=> Loading section .init, size 0x48 lma ffffffff88027970
=> Loading section .fini, size 0x30 lma ffffffff880279b8
=> Loading section .ctors, size 0x8 lma ffffffff880279e8
=> Loading section .dtors, size 0x8 lma ffffffff880279f0
=> Loading section .rdata, size 0x28b0 lma ffffffff88027a00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a2b0
=> Loading section .data, size 0x5e8 lma ffffffff8802a2c8
=> Start address ffffffff88000004
=> Transfer rate: 1393984 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 11/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:4 W:0 | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid
Time: 0:00:00.265215 fsfseeko01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12390 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012390
=> Loading section .init, size 0x48 lma ffffffff88012400
=> Loading section .fini, size 0x30 lma ffffffff88012448
=> Loading section .ctors, size 0x8 lma ffffffff88012478
=> Loading section .dtors, size 0x8 lma ffffffff88012480
=> Loading section .rdata, size 0x1a55 lma ffffffff88012490
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ee8
=> Loading section .data, size 0x420 lma ffffffff88013f00
=> Start address ffffffff88000004
=> Transfer rate: 661672 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 12/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:4 W:0 | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid
Time: 0:00:00.255842 fsimfsconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10640 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff88010640
=> Loading section .init, size 0x48 lma ffffffff880106a0
=> Loading section .fini, size 0x30 lma ffffffff880106e8
=> Loading section .ctors, size 0x8 lma ffffffff88010718
=> Loading section .dtors, size 0x8 lma ffffffff88010720
=> Loading section .rdata, size 0x1b00 lma ffffffff88010730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012230
=> Loading section .data, size 0x3c8 lma ffffffff88012248
=> Start address ffffffff88000004
=> Transfer rate: 602176 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 13/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:9 W:0 | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid
Time: 0:00:00.252785 fsimfsconfig02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f910
=> Loading section .init, size 0x48 lma ffffffff8800f980
=> Loading section .fini, size 0x30 lma ffffffff8800f9c8
=> Loading section .ctors, size 0x8 lma ffffffff8800f9f8
=> Loading section .dtors, size 0x8 lma ffffffff8800fa00
=> Loading section .rdata, size 0x1a51 lma ffffffff8800fa10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011468
=> Loading section .data, size 0x408 lma ffffffff88011480
=> Start address ffffffff88000004
=> Transfer rate: 574408 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 14/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:10 W:0 | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid
Time: 0:00:00.256955 fsimfsconfig03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10750 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff88010750
=> Loading section .init, size 0x48 lma ffffffff880107b0
=> Loading section .fini, size 0x30 lma ffffffff880107f8
=> Loading section .ctors, size 0x8 lma ffffffff88010828
=> Loading section .dtors, size 0x8 lma ffffffff88010830
=> Loading section .rdata, size 0x1a71 lma ffffffff88010840
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122b8
=> Loading section .data, size 0x3c8 lma ffffffff880122d0
=> Start address ffffffff88000004
=> Transfer rate: 603208 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 15/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:10 W:0 | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid
Time: 0:00:00.256530 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12b20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012b20
=> Loading section .init, size 0x48 lma ffffffff88012b90
=> Loading section .fini, size 0x30 lma ffffffff88012bd8
=> Loading section .ctors, size 0x8 lma ffffffff88012c08
=> Loading section .dtors, size 0x8 lma ffffffff88012c10
=> Loading section .rdata, size 0x1d7c lma ffffffff88012c20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880149a0
=> Loading section .data, size 0x448 lma ffffffff880149b8
=> Start address ffffffff88000004
=> Transfer rate: 683936 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 16/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:10 W:0 | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid
Time: 0:00:00.272288 fsjffs2gc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e9d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801e9d0
=> Loading section .init, size 0x48 lma ffffffff8801ea40
=> Loading section .fini, size 0x30 lma ffffffff8801ea88
=> Loading section .ctors, size 0x8 lma ffffffff8801eab8
=> Loading section .dtors, size 0x8 lma ffffffff8801eac0
=> Loading section .rdata, size 0x5231 lma ffffffff8801ead0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023d08
=> Loading section .data, size 0x214b8 lma ffffffff88023d20
=> Start address ffffffff88000004
=> Transfer rate: 2264648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 17/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:12 W:0 | mipstx39/jmr3904: fsnofs01.exe
Result: invalid
Time: 0:00:00.253778 fsnofs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xe2b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800e2b0
=> Loading section .init, size 0x48 lma ffffffff8800e320
=> Loading section .fini, size 0x30 lma ffffffff8800e368
=> Loading section .ctors, size 0x8 lma ffffffff8800e398
=> Loading section .dtors, size 0x8 lma ffffffff8800e3a0
=> Loading section .rdata, size 0x1f05 lma ffffffff8800e3b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880102b8
=> Loading section .data, size 0x3f8 lma ffffffff880102d0
=> Start address ffffffff88000004
=> Transfer rate: 538088 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 18/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:12 W:0 | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid
Time: 0:00:00.255453 fsrfsbitmap01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22000 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88022000
=> Loading section .init, size 0x48 lma ffffffff88022070
=> Loading section .fini, size 0x30 lma ffffffff880220b8
=> Loading section .ctors, size 0x8 lma ffffffff880220e8
=> Loading section .dtors, size 0x8 lma ffffffff880220f0
=> Loading section .rdata, size 0x571c lma ffffffff88022100
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027820
=> Loading section .data, size 0x490 lma ffffffff88027838
=> Start address ffffffff88000004
=> Transfer rate: 1304032 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 19/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:15 W:0 | mipstx39/jmr3904: fsrofs01.exe
Result: invalid
Time: 0:00:00.253508 fsrofs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20df0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88020df0
=> Loading section .init, size 0x48 lma ffffffff88020e60
=> Loading section .fini, size 0x30 lma ffffffff88020ea8
=> Loading section .ctors, size 0x8 lma ffffffff88020ed8
=> Loading section .dtors, size 0x8 lma ffffffff88020ee0
=> Loading section .rdata, size 0x4c20 lma ffffffff88020ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025b10
=> Loading section .data, size 0x468 lma ffffffff88025b28
=> Start address ffffffff88000004
=> Transfer rate: 1244224 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 20/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:13 W:0 | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid
Time: 0:00:00.254704 imfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88018510
=> Loading section .init, size 0x48 lma ffffffff88018580
=> Loading section .fini, size 0x30 lma ffffffff880185c8
=> Loading section .ctors, size 0x8 lma ffffffff880185f8
=> Loading section .dtors, size 0x8 lma ffffffff88018600
=> Loading section .rdata, size 0x2548 lma ffffffff88018610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ab58
=> Loading section .data, size 0x5bc lma ffffffff8801ab70
=> Start address ffffffff88000004
=> Transfer rate: 887072 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 21/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:19 W:0 | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid
Time: 0:00:00.262046 imfs_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10cb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010cb0
=> Loading section .init, size 0x48 lma ffffffff88010d20
=> Loading section .fini, size 0x30 lma ffffffff88010d68
=> Loading section .ctors, size 0x8 lma ffffffff88010d98
=> Loading section .dtors, size 0x8 lma ffffffff88010da0
=> Loading section .rdata, size 0x1b89 lma ffffffff88010db0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012940
=> Loading section .data, size 0x450 lma ffffffff88012958
=> Start address ffffffff88000004
=> Transfer rate: 617672 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 22/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:17 W:0 | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid
Time: 0:00:00.254460 imfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x119d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880119d0
=> Loading section .init, size 0x48 lma ffffffff88011a40
=> Loading section .fini, size 0x30 lma ffffffff88011a88
=> Loading section .ctors, size 0x8 lma ffffffff88011ab8
=> Loading section .dtors, size 0x8 lma ffffffff88011ac0
=> Loading section .rdata, size 0x1d0d lma ffffffff88011ad0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137e0
=> Loading section .data, size 0x450 lma ffffffff880137f8
=> Start address ffffffff88000004
=> Transfer rate: 647656 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 23/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:20 W:0 | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid
Time: 0:00:00.253977 imfs_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18790 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88018790
=> Loading section .init, size 0x48 lma ffffffff88018800
=> Loading section .fini, size 0x30 lma ffffffff88018848
=> Loading section .ctors, size 0x8 lma ffffffff88018878
=> Loading section .dtors, size 0x8 lma ffffffff88018880
=> Loading section .rdata, size 0x23e8 lma ffffffff88018890
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ac78
=> Loading section .data, size 0x5bc lma ffffffff8801ac90
=> Start address ffffffff88000004
=> Transfer rate: 889376 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 24/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:20 W:0 | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.256414 imfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013680
=> Loading section .init, size 0x48 lma ffffffff880136f0
=> Loading section .fini, size 0x30 lma ffffffff88013738
=> Loading section .ctors, size 0x8 lma ffffffff88013768
=> Loading section .dtors, size 0x8 lma ffffffff88013770
=> Loading section .rdata, size 0x200d lma ffffffff88013780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015790
=> Loading section .data, size 0x450 lma ffffffff880157a8
=> Start address ffffffff88000004
=> Transfer rate: 712552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 25/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:21 W:0 | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.254978 imfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11810 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011810
=> Loading section .init, size 0x48 lma ffffffff88011880
=> Loading section .fini, size 0x30 lma ffffffff880118c8
=> Loading section .ctors, size 0x8 lma ffffffff880118f8
=> Loading section .dtors, size 0x8 lma ffffffff88011900
=> Loading section .rdata, size 0x1b9d lma ffffffff88011910
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134b0
=> Loading section .data, size 0x450 lma ffffffff880134c8
=> Start address ffffffff88000004
=> Transfer rate: 641128 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 26/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:20 W:0 | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid
Time: 0:00:00.253352 imfs_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11240 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011240
=> Loading section .init, size 0x48 lma ffffffff880112b0
=> Loading section .fini, size 0x30 lma ffffffff880112f8
=> Loading section .ctors, size 0x8 lma ffffffff88011328
=> Loading section .dtors, size 0x8 lma ffffffff88011330
=> Loading section .rdata, size 0x1ce5 lma ffffffff88011340
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013028
=> Loading section .data, size 0x450 lma ffffffff88013040
=> Start address ffffffff88000004
=> Transfer rate: 631848 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 27/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:21 W:0 | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid
Time: 0:00:00.253946 imfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x122c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880122c0
=> Loading section .init, size 0x48 lma ffffffff88012330
=> Loading section .fini, size 0x30 lma ffffffff88012378
=> Loading section .ctors, size 0x8 lma ffffffff880123a8
=> Loading section .dtors, size 0x8 lma ffffffff880123b0
=> Loading section .rdata, size 0x1cc0 lma ffffffff880123c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014080
=> Loading section .data, size 0x45c lma ffffffff88014098
=> Start address ffffffff88000004
=> Transfer rate: 665440 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 28/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:21 W:0 | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid
Time: 0:00:00.257654 jffs2_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88026170
=> Loading section .init, size 0x48 lma ffffffff880261e0
=> Loading section .fini, size 0x30 lma ffffffff88026228
=> Loading section .ctors, size 0x8 lma ffffffff88026258
=> Loading section .dtors, size 0x8 lma ffffffff88026260
=> Loading section .rdata, size 0x5910 lma ffffffff88026270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802bb80
=> Loading section .data, size 0x2161c lma ffffffff8802bb98
=> Start address ffffffff88000004
=> Transfer rate: 2526560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 29/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:28 W:0 | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid
Time: 0:00:00.253171 jffs2_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e980 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801e980
=> Loading section .init, size 0x48 lma ffffffff8801e9f0
=> Loading section .fini, size 0x30 lma ffffffff8801ea38
=> Loading section .ctors, size 0x8 lma ffffffff8801ea68
=> Loading section .dtors, size 0x8 lma ffffffff8801ea70
=> Loading section .rdata, size 0x4f91 lma ffffffff8801ea80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023a18
=> Loading section .data, size 0x214b0 lma ffffffff88023a30
=> Start address ffffffff88000004
=> Transfer rate: 2258568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 30/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:26 W:0 | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid
Time: 0:00:00.258030 jffs2_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1f690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801f690
=> Loading section .init, size 0x48 lma ffffffff8801f700
=> Loading section .fini, size 0x30 lma ffffffff8801f748
=> Loading section .ctors, size 0x8 lma ffffffff8801f778
=> Loading section .dtors, size 0x8 lma ffffffff8801f780
=> Loading section .rdata, size 0x5115 lma ffffffff8801f790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880248a8
=> Loading section .data, size 0x214b0 lma ffffffff880248c0
=> Start address ffffffff88000004
=> Transfer rate: 2288424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 31/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:28 W:0 | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid
Time: 0:00:00.251775 jffs2_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x263f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880263f0
=> Loading section .init, size 0x48 lma ffffffff88026460
=> Loading section .fini, size 0x30 lma ffffffff880264a8
=> Loading section .ctors, size 0x8 lma ffffffff880264d8
=> Loading section .dtors, size 0x8 lma ffffffff880264e0
=> Loading section .rdata, size 0x57b0 lma ffffffff880264f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802bca0
=> Loading section .data, size 0x2161c lma ffffffff8802bcb8
=> Start address ffffffff88000004
=> Transfer rate: 2528864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 32/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:26 W:0 | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid
Time: 0:00:00.253556 jffs2_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21270 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88021270
=> Loading section .init, size 0x48 lma ffffffff880212e0
=> Loading section .fini, size 0x30 lma ffffffff88021328
=> Loading section .ctors, size 0x8 lma ffffffff88021358
=> Loading section .dtors, size 0x8 lma ffffffff88021360
=> Loading section .rdata, size 0x541d lma ffffffff88021370
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026790
=> Loading section .data, size 0x214b8 lma ffffffff880267a8
=> Start address ffffffff88000004
=> Transfer rate: 2351784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 33/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:29 W:0 | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid
Time: 0:00:00.256237 jffs2_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1f4e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801f4e0
=> Loading section .init, size 0x48 lma ffffffff8801f550
=> Loading section .fini, size 0x30 lma ffffffff8801f598
=> Loading section .ctors, size 0x8 lma ffffffff8801f5c8
=> Loading section .dtors, size 0x8 lma ffffffff8801f5d0
=> Loading section .rdata, size 0x4fa5 lma ffffffff8801f5e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024588
=> Loading section .data, size 0x214b0 lma ffffffff880245a0
=> Start address ffffffff88000004
=> Transfer rate: 2282024 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 34/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:30 W:0 | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid
Time: 0:00:00.255914 jffs2_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ee30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801ee30
=> Loading section .init, size 0x48 lma ffffffff8801eea0
=> Loading section .fini, size 0x30 lma ffffffff8801eee8
=> Loading section .ctors, size 0x8 lma ffffffff8801ef18
=> Loading section .dtors, size 0x8 lma ffffffff8801ef20
=> Loading section .rdata, size 0x50ed lma ffffffff8801ef30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024020
=> Loading section .data, size 0x214b0 lma ffffffff88024038
=> Start address ffffffff88000004
=> Transfer rate: 2270952 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 35/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:29 W:0 | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid
Time: 0:00:00.253464 jffs2_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ff90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801ff90
=> Loading section .init, size 0x48 lma ffffffff88020000
=> Loading section .fini, size 0x30 lma ffffffff88020048
=> Loading section .ctors, size 0x8 lma ffffffff88020078
=> Loading section .dtors, size 0x8 lma ffffffff88020080
=> Loading section .rdata, size 0x50c8 lma ffffffff88020090
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025158
=> Loading section .data, size 0x214bc lma ffffffff88025170
=> Start address ffffffff88000004
=> Transfer rate: 2306336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 36/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid
Time: 0:00:00.252944 mdosfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2b790 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8802b790
=> Loading section .init, size 0x48 lma ffffffff8802b800
=> Loading section .fini, size 0x30 lma ffffffff8802b848
=> Loading section .ctors, size 0x8 lma ffffffff8802b878
=> Loading section .dtors, size 0x8 lma ffffffff8802b880
=> Loading section .rdata, size 0x2fb4 lma ffffffff8802b890
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e848
=> Loading section .data, size 0x650 lma ffffffff8802e860
=> Start address ffffffff88000004
=> Transfer rate: 1537312 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 37/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:33 W:0 | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid
Time: 0:00:00.257946 mdosfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27ad0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027ad0
=> Loading section .init, size 0x48 lma ffffffff88027b40
=> Loading section .fini, size 0x30 lma ffffffff88027b88
=> Loading section .ctors, size 0x8 lma ffffffff88027bb8
=> Loading section .dtors, size 0x8 lma ffffffff88027bc0
=> Loading section .rdata, size 0x2b88 lma ffffffff88027bd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a758
=> Loading section .data, size 0x650 lma ffffffff8802a770
=> Start address ffffffff88000004
=> Transfer rate: 1404352 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 38/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.254577 mdosfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x29870 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88029870
=> Loading section .init, size 0x48 lma ffffffff880298e0
=> Loading section .fini, size 0x30 lma ffffffff88029928
=> Loading section .ctors, size 0x8 lma ffffffff88029958
=> Loading section .dtors, size 0x8 lma ffffffff88029960
=> Loading section .rdata, size 0x2e80 lma ffffffff88029970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c7f0
=> Loading section .data, size 0x650 lma ffffffff8802c808
=> Start address ffffffff88000004
=> Transfer rate: 1471104 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 39/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:33 W:0 | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.258684 mdosfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27dd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027dd0
=> Loading section .init, size 0x48 lma ffffffff88027e40
=> Loading section .fini, size 0x30 lma ffffffff88027e88
=> Loading section .ctors, size 0x8 lma ffffffff88027eb8
=> Loading section .dtors, size 0x8 lma ffffffff88027ec0
=> Loading section .rdata, size 0x2a10 lma ffffffff88027ed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a8e0
=> Loading section .data, size 0x650 lma ffffffff8802a8f8
=> Start address ffffffff88000004
=> Transfer rate: 1407488 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 40/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:35 W:0 | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid
Time: 0:00:00.259012 mdosfs_fsstatvfs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26ed0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88026ed0
=> Loading section .init, size 0x48 lma ffffffff88026f40
=> Loading section .fini, size 0x30 lma ffffffff88026f88
=> Loading section .ctors, size 0x8 lma ffffffff88026fb8
=> Loading section .dtors, size 0x8 lma ffffffff88026fc0
=> Loading section .rdata, size 0x2b68 lma ffffffff88026fd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88029b38
=> Loading section .data, size 0x650 lma ffffffff88029b50
=> Start address ffffffff88000004
=> Transfer rate: 1379520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 41/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:36 W:0 | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid
Time: 0:00:00.253663 mdosfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28580 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028580
=> Loading section .init, size 0x48 lma ffffffff880285f0
=> Loading section .fini, size 0x30 lma ffffffff88028638
=> Loading section .ctors, size 0x8 lma ffffffff88028668
=> Loading section .dtors, size 0x8 lma ffffffff88028670
=> Loading section .rdata, size 0x2b1c lma ffffffff88028680
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b1a0
=> Loading section .data, size 0x65c lma ffffffff8802b1b8
=> Start address ffffffff88000004
=> Transfer rate: 1425472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 42/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:36 W:0 | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid
Time: 0:00:00.262012 mimfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019170
=> Loading section .init, size 0x48 lma ffffffff880191e0
=> Loading section .fini, size 0x30 lma ffffffff88019228
=> Loading section .ctors, size 0x8 lma ffffffff88019258
=> Loading section .dtors, size 0x8 lma ffffffff88019260
=> Loading section .rdata, size 0x2670 lma ffffffff88019270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b8e0
=> Loading section .data, size 0x5ec lma ffffffff8801b8f8
=> Start address ffffffff88000004
=> Transfer rate: 915168 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 43/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:36 W:0 | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid
Time: 0:00:00.254971 mimfs_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11920 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011920
=> Loading section .init, size 0x48 lma ffffffff88011990
=> Loading section .fini, size 0x30 lma ffffffff880119d8
=> Loading section .ctors, size 0x8 lma ffffffff88011a08
=> Loading section .dtors, size 0x8 lma ffffffff88011a10
=> Loading section .rdata, size 0x1cad lma ffffffff88011a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136d0
=> Loading section .data, size 0x480 lma ffffffff880136e8
=> Start address ffffffff88000004
=> Transfer rate: 645864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 44/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:39 W:0 | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid
Time: 0:00:00.257954 mimfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12640 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012640
=> Loading section .init, size 0x48 lma ffffffff880126b0
=> Loading section .fini, size 0x30 lma ffffffff880126f8
=> Loading section .ctors, size 0x8 lma ffffffff88012728
=> Loading section .dtors, size 0x8 lma ffffffff88012730
=> Loading section .rdata, size 0x1e31 lma ffffffff88012740
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014578
=> Loading section .data, size 0x480 lma ffffffff88014590
=> Start address ffffffff88000004
=> Transfer rate: 675848 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 45/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:41 W:0 | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid
Time: 0:00:00.257208 mimfs_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x193f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880193f0
=> Loading section .init, size 0x48 lma ffffffff88019460
=> Loading section .fini, size 0x30 lma ffffffff880194a8
=> Loading section .ctors, size 0x8 lma ffffffff880194d8
=> Loading section .dtors, size 0x8 lma ffffffff880194e0
=> Loading section .rdata, size 0x2508 lma ffffffff880194f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b9f8
=> Loading section .data, size 0x5ec lma ffffffff8801ba10
=> Start address ffffffff88000004
=> Transfer rate: 917408 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 46/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:41 W:0 | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.255811 mimfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x142f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880142f0
=> Loading section .init, size 0x48 lma ffffffff88014360
=> Loading section .fini, size 0x30 lma ffffffff880143a8
=> Loading section .ctors, size 0x8 lma ffffffff880143d8
=> Loading section .dtors, size 0x8 lma ffffffff880143e0
=> Loading section .rdata, size 0x2131 lma ffffffff880143f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016528
=> Loading section .data, size 0x480 lma ffffffff88016540
=> Start address ffffffff88000004
=> Transfer rate: 740744 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 47/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid
Time: 0:00:00.252819 mimfs_fsrename.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801c140
=> Loading section .init, size 0x48 lma ffffffff8801c1b0
=> Loading section .fini, size 0x30 lma ffffffff8801c1f8
=> Loading section .ctors, size 0x8 lma ffffffff8801c228
=> Loading section .dtors, size 0x8 lma ffffffff8801c230
=> Loading section .rdata, size 0x2b98 lma ffffffff8801c240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801edd8
=> Loading section .data, size 0x5ec lma ffffffff8801edf0
=> Start address ffffffff88000004
=> Transfer rate: 1023648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 48/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:42 W:0 | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.275902 mimfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12480 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012480
=> Loading section .init, size 0x48 lma ffffffff880124f0
=> Loading section .fini, size 0x30 lma ffffffff88012538
=> Loading section .ctors, size 0x8 lma ffffffff88012568
=> Loading section .dtors, size 0x8 lma ffffffff88012570
=> Loading section .rdata, size 0x1cc1 lma ffffffff88012580
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014248
=> Loading section .data, size 0x480 lma ffffffff88014260
=> Start address ffffffff88000004
=> Transfer rate: 669320 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 49/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:46 W:0 | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid
Time: 0:00:00.270799 mimfs_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011ea0
=> Loading section .init, size 0x48 lma ffffffff88011f10
=> Loading section .fini, size 0x30 lma ffffffff88011f58
=> Loading section .ctors, size 0x8 lma ffffffff88011f88
=> Loading section .dtors, size 0x8 lma ffffffff88011f90
=> Loading section .rdata, size 0x1e09 lma ffffffff88011fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013db0
=> Loading section .data, size 0x480 lma ffffffff88013dc8
=> Start address ffffffff88000004
=> Transfer rate: 659912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 50/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:45 W:0 | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid
Time: 0:00:00.254496 mimfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12f20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012f20
=> Loading section .init, size 0x48 lma ffffffff88012f90
=> Loading section .fini, size 0x30 lma ffffffff88012fd8
=> Loading section .ctors, size 0x8 lma ffffffff88013008
=> Loading section .dtors, size 0x8 lma ffffffff88013010
=> Loading section .rdata, size 0x1de4 lma ffffffff88013020
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014e08
=> Loading section .data, size 0x48c lma ffffffff88014e20
=> Start address ffffffff88000004
=> Transfer rate: 693504 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 51/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:45 W:0 | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid
Time: 0:00:00.253971 mrfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28390 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028390
=> Loading section .init, size 0x48 lma ffffffff88028400
=> Loading section .fini, size 0x30 lma ffffffff88028448
=> Loading section .ctors, size 0x8 lma ffffffff88028478
=> Loading section .dtors, size 0x8 lma ffffffff88028480
=> Loading section .rdata, size 0x5710 lma ffffffff88028490
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802dba0
=> Loading section .data, size 0x5fc lma ffffffff8802dbb8
=> Start address ffffffff88000004
=> Transfer rate: 1510752 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 52/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:47 W:0 | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid
Time: 0:00:00.257207 mrfs_fsfpathconf.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20770 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88020770
=> Loading section .init, size 0x48 lma ffffffff880207e0
=> Loading section .fini, size 0x30 lma ffffffff88020828
=> Loading section .ctors, size 0x8 lma ffffffff88020858
=> Loading section .dtors, size 0x8 lma ffffffff88020860
=> Loading section .rdata, size 0x4f44 lma ffffffff88020870
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880257b8
=> Loading section .data, size 0x490 lma ffffffff880257d0
=> Start address ffffffff88000004
=> Transfer rate: 1237664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 53/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:49 W:0 | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid
Time: 0:00:00.254802 mrfs_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20c70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88020c70
=> Loading section .init, size 0x48 lma ffffffff88020ce0
=> Loading section .fini, size 0x30 lma ffffffff88020d28
=> Loading section .ctors, size 0x8 lma ffffffff88020d58
=> Loading section .dtors, size 0x8 lma ffffffff88020d60
=> Loading section .rdata, size 0x4d64 lma ffffffff88020d70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025ad8
=> Loading section .data, size 0x490 lma ffffffff88025af0
=> Start address ffffffff88000004
=> Transfer rate: 1244064 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 54/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:49 W:0 | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid
Time: 0:00:00.253719 mrfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x216d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880216d0
=> Loading section .init, size 0x48 lma ffffffff88021740
=> Loading section .fini, size 0x30 lma ffffffff88021788
=> Loading section .ctors, size 0x8 lma ffffffff880217b8
=> Loading section .dtors, size 0x8 lma ffffffff880217c0
=> Loading section .rdata, size 0x4eec lma ffffffff880217d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880266c0
=> Loading section .data, size 0x490 lma ffffffff880266d8
=> Start address ffffffff88000004
=> Transfer rate: 1268448 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 55/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:50 W:0 | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid
Time: 0:00:00.253670 mrfs_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28610 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028610
=> Loading section .init, size 0x48 lma ffffffff88028680
=> Loading section .fini, size 0x30 lma ffffffff880286c8
=> Loading section .ctors, size 0x8 lma ffffffff880286f8
=> Loading section .dtors, size 0x8 lma ffffffff88028700
=> Loading section .rdata, size 0x55c0 lma ffffffff88028710
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802dcd0
=> Loading section .data, size 0x5fc lma ffffffff8802dce8
=> Start address ffffffff88000004
=> Transfer rate: 1513184 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 56/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:50 W:0 | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.256346 mrfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x235c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880235c0
=> Loading section .init, size 0x48 lma ffffffff88023630
=> Loading section .fini, size 0x30 lma ffffffff88023678
=> Loading section .ctors, size 0x8 lma ffffffff880236a8
=> Loading section .dtors, size 0x8 lma ffffffff880236b0
=> Loading section .rdata, size 0x51e8 lma ffffffff880236c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880288a8
=> Loading section .data, size 0x490 lma ffffffff880288c0
=> Start address ffffffff88000004
=> Transfer rate: 1337920 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 57/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:53 W:0 | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid
Time: 0:00:00.256827 mrfs_fsrename.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2b360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8802b360
=> Loading section .init, size 0x48 lma ffffffff8802b3d0
=> Loading section .fini, size 0x30 lma ffffffff8802b418
=> Loading section .ctors, size 0x8 lma ffffffff8802b448
=> Loading section .dtors, size 0x8 lma ffffffff8802b450
=> Loading section .rdata, size 0x5c48 lma ffffffff8802b460
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880310a8
=> Loading section .data, size 0x5fc lma ffffffff880310c0
=> Start address ffffffff88000004
=> Transfer rate: 1619360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 58/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.259590 mrfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x219c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880219c0
=> Loading section .init, size 0x48 lma ffffffff88021a30
=> Loading section .fini, size 0x30 lma ffffffff88021a78
=> Loading section .ctors, size 0x8 lma ffffffff88021aa8
=> Loading section .dtors, size 0x8 lma ffffffff88021ab0
=> Loading section .rdata, size 0x4d80 lma ffffffff88021ac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026840
=> Loading section .data, size 0x490 lma ffffffff88026858
=> Start address ffffffff88000004
=> Transfer rate: 1271552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 59/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:52 W:0 | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid
Time: 0:00:00.254118 mrfs_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21120 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88021120
=> Loading section .init, size 0x48 lma ffffffff88021190
=> Loading section .fini, size 0x30 lma ffffffff880211d8
=> Loading section .ctors, size 0x8 lma ffffffff88021208
=> Loading section .dtors, size 0x8 lma ffffffff88021210
=> Loading section .rdata, size 0x4ec4 lma ffffffff88021220
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880260e8
=> Loading section .data, size 0x490 lma ffffffff88026100
=> Start address ffffffff88000004
=> Transfer rate: 1256480 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 60/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:55 W:0 | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid
Time: 0:00:00.271403 mrfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88022190
=> Loading section .init, size 0x48 lma ffffffff88022200
=> Loading section .fini, size 0x30 lma ffffffff88022248
=> Loading section .ctors, size 0x8 lma ffffffff88022278
=> Loading section .dtors, size 0x8 lma ffffffff88022280
=> Loading section .rdata, size 0x4e84 lma ffffffff88022290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027118
=> Loading section .data, size 0x49c lma ffffffff88027130
=> Start address ffffffff88000004
=> Transfer rate: 1289728 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 61/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: tftpfs.exe
Result: invalid
Time: 0:00:00.254339 tftpfs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x35210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x1f0 lma ffffffff88035210
=> Loading section .init, size 0x48 lma ffffffff88035400
=> Loading section .fini, size 0x30 lma ffffffff88035448
=> Loading section .ctors, size 0x8 lma ffffffff88035478
=> Loading section .dtors, size 0x8 lma ffffffff88035480
=> Loading section .rdata, size 0x5fc0 lma ffffffff88035490
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8803b450
=> Loading section .data, size 0xbbc lma ffffffff8803b468
=> Start address ffffffff88000004
=> Transfer rate: 1966304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 62/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:58 W:0 | mipstx39/jmr3904: block01.exe
Result: invalid
Time: 0:00:00.253930 block01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x158d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880158d0
=> Loading section .init, size 0x48 lma ffffffff88015940
=> Loading section .fini, size 0x30 lma ffffffff88015988
=> Loading section .ctors, size 0x8 lma ffffffff880159b8
=> Loading section .dtors, size 0x8 lma ffffffff880159c0
=> Loading section .rdata, size 0x1cbd lma ffffffff880159d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017690
=> Loading section .data, size 0x440 lma ffffffff880176a8
=> Start address ffffffff88000004
=> Transfer rate: 775912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 63/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:57 W:0 | mipstx39/jmr3904: block02.exe
Result: invalid
Time: 0:00:00.257808 block02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x143b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880143b0
=> Loading section .init, size 0x48 lma ffffffff88014420
=> Loading section .fini, size 0x30 lma ffffffff88014468
=> Loading section .ctors, size 0x8 lma ffffffff88014498
=> Loading section .dtors, size 0x8 lma ffffffff880144a0
=> Loading section .rdata, size 0x1c75 lma ffffffff880144b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016128
=> Loading section .data, size 0x430 lma ffffffff88016140
=> Start address ffffffff88000004
=> Transfer rate: 731944 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 64/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:58 W:0 | mipstx39/jmr3904: block03.exe
Result: invalid
Time: 0:00:00.256947 block03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14350 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014350
=> Loading section .init, size 0x48 lma ffffffff880143c0
=> Loading section .fini, size 0x30 lma ffffffff88014408
=> Loading section .ctors, size 0x8 lma ffffffff88014438
=> Loading section .dtors, size 0x8 lma ffffffff88014440
=> Loading section .rdata, size 0x1c5d lma ffffffff88014450
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880160b0
=> Loading section .data, size 0x430 lma ffffffff880160c8
=> Start address ffffffff88000004
=> Transfer rate: 730984 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 65/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:60 W:0 | mipstx39/jmr3904: block04.exe
Result: invalid
Time: 0:00:00.254413 block04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x142e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880142e0
=> Loading section .init, size 0x48 lma ffffffff88014350
=> Loading section .fini, size 0x30 lma ffffffff88014398
=> Loading section .ctors, size 0x8 lma ffffffff880143c8
=> Loading section .dtors, size 0x8 lma ffffffff880143d0
=> Loading section .rdata, size 0x1bf5 lma ffffffff880143e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015fd8
=> Loading section .data, size 0x430 lma ffffffff88015ff0
=> Start address ffffffff88000004
=> Transfer rate: 729256 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 66/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:61 W:0 | mipstx39/jmr3904: block05.exe
Result: invalid
Time: 0:00:00.261162 block05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15630 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015630
=> Loading section .init, size 0x48 lma ffffffff880156a0
=> Loading section .fini, size 0x30 lma ffffffff880156e8
=> Loading section .ctors, size 0x8 lma ffffffff88015718
=> Loading section .dtors, size 0x8 lma ffffffff88015720
=> Loading section .rdata, size 0x1c3d lma ffffffff88015730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017370
=> Loading section .data, size 0x440 lma ffffffff88017388
=> Start address ffffffff88000004
=> Transfer rate: 769512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 67/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:61 W:0 | mipstx39/jmr3904: block06.exe
Result: invalid
Time: 0:00:00.259229 block06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e660 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801e660
=> Loading section .init, size 0x48 lma ffffffff8801e6d0
=> Loading section .fini, size 0x30 lma ffffffff8801e718
=> Loading section .ctors, size 0x8 lma ffffffff8801e748
=> Loading section .dtors, size 0x8 lma ffffffff8801e750
=> Loading section .rdata, size 0x2dc8 lma ffffffff8801e760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021528
=> Loading section .data, size 0x5dc lma ffffffff88021540
=> Start address ffffffff88000004
=> Transfer rate: 1104032 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 68/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:61 W:0 | mipstx39/jmr3904: block07.exe
Result: invalid
Time: 0:00:00.255349 block07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14770 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014770
=> Loading section .init, size 0x48 lma ffffffff880147e0
=> Loading section .fini, size 0x30 lma ffffffff88014828
=> Loading section .ctors, size 0x8 lma ffffffff88014858
=> Loading section .dtors, size 0x8 lma ffffffff88014860
=> Loading section .rdata, size 0x1cd1 lma ffffffff88014870
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016548
=> Loading section .data, size 0x430 lma ffffffff88016560
=> Start address ffffffff88000004
=> Transfer rate: 740360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 69/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:65 W:0 | mipstx39/jmr3904: block08.exe
Result: invalid
Time: 0:00:00.254833 block08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c040 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801c040
=> Loading section .init, size 0x48 lma ffffffff8801c0c0
=> Loading section .fini, size 0x30 lma ffffffff8801c108
=> Loading section .ctors, size 0x8 lma ffffffff8801c138
=> Loading section .dtors, size 0x8 lma ffffffff8801c140
=> Loading section .rdata, size 0x2539 lma ffffffff8801c150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e690
=> Loading section .data, size 0x4d8 lma ffffffff8801e6a8
=> Start address ffffffff88000004
=> Transfer rate: 1006472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 70/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:65 W:0 | mipstx39/jmr3904: block09.exe
Result: invalid
Time: 0:00:00.255450 block09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14d30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014d30
=> Loading section .init, size 0x48 lma ffffffff88014da0
=> Loading section .fini, size 0x30 lma ffffffff88014de8
=> Loading section .ctors, size 0x8 lma ffffffff88014e18
=> Loading section .dtors, size 0x8 lma ffffffff88014e20
=> Loading section .rdata, size 0x1bfd lma ffffffff88014e30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016a30
=> Loading section .data, size 0x440 lma ffffffff88016a48
=> Start address ffffffff88000004
=> Transfer rate: 750568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 71/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:68 W:0 | mipstx39/jmr3904: block10.exe
Result: invalid
Time: 0:00:00.253367 block10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15720 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015720
=> Loading section .init, size 0x48 lma ffffffff88015790
=> Loading section .fini, size 0x30 lma ffffffff880157d8
=> Loading section .ctors, size 0x8 lma ffffffff88015808
=> Loading section .dtors, size 0x8 lma ffffffff88015810
=> Loading section .rdata, size 0x1e25 lma ffffffff88015820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017648
=> Loading section .data, size 0x440 lma ffffffff88017660
=> Start address ffffffff88000004
=> Transfer rate: 775336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 72/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:65 W:0 | mipstx39/jmr3904: block11.exe
Result: invalid
Time: 0:00:00.259737 block11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16180 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016180
=> Loading section .init, size 0x48 lma ffffffff880161f0
=> Loading section .fini, size 0x30 lma ffffffff88016238
=> Loading section .ctors, size 0x8 lma ffffffff88016268
=> Loading section .dtors, size 0x8 lma ffffffff88016270
=> Loading section .rdata, size 0x1e05 lma ffffffff88016280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018088
=> Loading section .data, size 0x458 lma ffffffff880180a0
=> Start address ffffffff88000004
=> Transfer rate: 796520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 73/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:68 W:0 | mipstx39/jmr3904: block12.exe
Result: invalid
Time: 0:00:00.252919 block12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x147a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880147a0
=> Loading section .init, size 0x48 lma ffffffff88014810
=> Loading section .fini, size 0x30 lma ffffffff88014858
=> Loading section .ctors, size 0x8 lma ffffffff88014888
=> Loading section .dtors, size 0x8 lma ffffffff88014890
=> Loading section .rdata, size 0x1c2d lma ffffffff880148a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880164d0
=> Loading section .data, size 0x478 lma ffffffff880164e8
=> Start address ffffffff88000004
=> Transfer rate: 740008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 74/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:70 W:0 | mipstx39/jmr3904: block13.exe
Result: invalid
Time: 0:00:00.261533 block13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x148b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880148b0
=> Loading section .init, size 0x48 lma ffffffff88014920
=> Loading section .fini, size 0x30 lma ffffffff88014968
=> Loading section .ctors, size 0x8 lma ffffffff88014998
=> Loading section .dtors, size 0x8 lma ffffffff880149a0
=> Loading section .rdata, size 0x2171 lma ffffffff880149b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016b28
=> Loading section .data, size 0x440 lma ffffffff88016b40
=> Start address ffffffff88000004
=> Transfer rate: 752520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 75/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:70 W:0 | mipstx39/jmr3904: block14.exe
Result: invalid
Time: 0:00:00.257093 block14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14b50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014b50
=> Loading section .init, size 0x48 lma ffffffff88014bc0
=> Loading section .fini, size 0x30 lma ffffffff88014c08
=> Loading section .ctors, size 0x8 lma ffffffff88014c38
=> Loading section .dtors, size 0x8 lma ffffffff88014c40
=> Loading section .rdata, size 0x25c1 lma ffffffff88014c50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017218
=> Loading section .data, size 0x440 lma ffffffff88017230
=> Start address ffffffff88000004
=> Transfer rate: 766728 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 76/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:70 W:0 | mipstx39/jmr3904: block15.exe
Result: invalid
Time: 0:00:00.254604 block15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014910
=> Loading section .init, size 0x48 lma ffffffff88014980
=> Loading section .fini, size 0x30 lma ffffffff880149c8
=> Loading section .ctors, size 0x8 lma ffffffff880149f8
=> Loading section .dtors, size 0x8 lma ffffffff88014a00
=> Loading section .rdata, size 0x1cf9 lma ffffffff88014a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016710
=> Loading section .data, size 0x440 lma ffffffff88016728
=> Start address ffffffff88000004
=> Transfer rate: 744136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 77/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:73 W:0 | mipstx39/jmr3904: block16.exe
Result: invalid
Time: 0:00:00.255491 block16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14b90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014b90
=> Loading section .init, size 0x48 lma ffffffff88014c00
=> Loading section .fini, size 0x30 lma ffffffff88014c48
=> Loading section .ctors, size 0x8 lma ffffffff88014c78
=> Loading section .dtors, size 0x8 lma ffffffff88014c80
=> Loading section .rdata, size 0x1ca9 lma ffffffff88014c90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016940
=> Loading section .data, size 0x440 lma ffffffff88016958
=> Start address ffffffff88000004
=> Transfer rate: 748616 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 78/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:74 W:0 | mipstx39/jmr3904: block17.exe
Result: invalid
Time: 0:00:00.255491 block17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14000 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014000
=> Loading section .init, size 0x48 lma ffffffff88014070
=> Loading section .fini, size 0x30 lma ffffffff880140b8
=> Loading section .ctors, size 0x8 lma ffffffff880140e8
=> Loading section .dtors, size 0x8 lma ffffffff880140f0
=> Loading section .rdata, size 0x1b51 lma ffffffff88014100
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015c58
=> Loading section .data, size 0x440 lma ffffffff88015c70
=> Start address ffffffff88000004
=> Transfer rate: 722184 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 79/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:73 W:0 | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid
Time: 0:00:00.253703 bspcmdline01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010140
=> Loading section .init, size 0x48 lma ffffffff880101b0
=> Loading section .fini, size 0x30 lma ffffffff880101f8
=> Loading section .ctors, size 0x8 lma ffffffff88010228
=> Loading section .dtors, size 0x8 lma ffffffff88010230
=> Loading section .rdata, size 0x1f41 lma ffffffff88010240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012188
=> Loading section .data, size 0x408 lma ffffffff880121a0
=> Start address ffffffff88000004
=> Transfer rate: 601288 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 80/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:76 W:0 | mipstx39/jmr3904: capture01.exe
Result: invalid
Time: 0:00:00.255370 capture01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e0e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801e0e0
=> Loading section .init, size 0x48 lma ffffffff8801e160
=> Loading section .fini, size 0x30 lma ffffffff8801e1a8
=> Loading section .ctors, size 0x8 lma ffffffff8801e1d8
=> Loading section .dtors, size 0x8 lma ffffffff8801e1e0
=> Loading section .rdata, size 0x2810 lma ffffffff8801e1f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020a00
=> Loading section .data, size 0x618 lma ffffffff88020a18
=> Start address ffffffff88000004
=> Transfer rate: 1081664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 81/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:77 W:0 | mipstx39/jmr3904: complex.exe
Result: invalid
Time: 0:00:00.258472 complex.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x24e40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88024e40
=> Loading section .init, size 0x48 lma ffffffff88024eb0
=> Loading section .fini, size 0x30 lma ffffffff88024ef8
=> Loading section .ctors, size 0x8 lma ffffffff88024f28
=> Loading section .dtors, size 0x8 lma ffffffff88024f30
=> Loading section .rdata, size 0x2f50 lma ffffffff88024f40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027e90
=> Loading section .data, size 0x5c0 lma ffffffff88027ea8
=> Start address ffffffff88000004
=> Transfer rate: 1319680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 82/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:77 W:0 | mipstx39/jmr3904: cpuuse.exe
Result: invalid
Time: 0:00:00.253334 cpuuse.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12780 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012780
=> Loading section .init, size 0x48 lma ffffffff880127f0
=> Loading section .fini, size 0x30 lma ffffffff88012838
=> Loading section .ctors, size 0x8 lma ffffffff88012868
=> Loading section .dtors, size 0x8 lma ffffffff88012870
=> Loading section .rdata, size 0x24fc lma ffffffff88012880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d80
=> Loading section .data, size 0x610 lma ffffffff88014d98
=> Start address ffffffff88000004
=> Transfer rate: 695520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 83/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:78 W:0 | mipstx39/jmr3904: crypt01.exe
Result: invalid
Time: 0:00:00.255130 crypt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x24ce0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88024ce0
=> Loading section .init, size 0x48 lma ffffffff88024d50
=> Loading section .fini, size 0x30 lma ffffffff88024d98
=> Loading section .ctors, size 0x8 lma ffffffff88024dc8
=> Loading section .dtors, size 0x8 lma ffffffff88024dd0
=> Loading section .rdata, size 0x2d40 lma ffffffff88024de0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027b20
=> Loading section .data, size 0x5e4 lma ffffffff88027b38
=> Start address ffffffff88000004
=> Transfer rate: 1312928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 84/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:78 W:0 | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid
Time: 0:00:00.256302 defaultconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14560 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014560
=> Loading section .init, size 0x48 lma ffffffff880145e0
=> Loading section .fini, size 0x30 lma ffffffff88014628
=> Loading section .ctors, size 0x8 lma ffffffff88014658
=> Loading section .dtors, size 0x8 lma ffffffff88014660
=> Loading section .rdata, size 0x1ca8 lma ffffffff88014670
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016318
=> Loading section .data, size 0x5b0 lma ffffffff88016330
=> Start address ffffffff88000004
=> Transfer rate: 739008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 85/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: devfs01.exe
Result: invalid
Time: 0:00:00.255626 devfs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xc4d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800c4d0
=> Loading section .init, size 0x48 lma ffffffff8800c540
=> Loading section .fini, size 0x30 lma ffffffff8800c588
=> Loading section .ctors, size 0x8 lma ffffffff8800c5b8
=> Loading section .dtors, size 0x8 lma ffffffff8800c5c0
=> Loading section .rdata, size 0x1871 lma ffffffff8800c5d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800de48
=> Loading section .data, size 0x408 lma ffffffff8800de60
=> Start address ffffffff88000004
=> Transfer rate: 463560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 86/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:81 W:0 | mipstx39/jmr3904: devfs04.exe
Result: invalid
Time: 0:00:00.253662 devfs04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xd210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800d210
=> Loading section .init, size 0x48 lma ffffffff8800d280
=> Loading section .fini, size 0x30 lma ffffffff8800d2c8
=> Loading section .ctors, size 0x8 lma ffffffff8800d2f8
=> Loading section .dtors, size 0x8 lma ffffffff8800d300
=> Loading section .rdata, size 0x1a45 lma ffffffff8800d310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800ed58
=> Loading section .data, size 0x3ec lma ffffffff8800ed70
=> Start address ffffffff88000004
=> Transfer rate: 494216 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 87/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:84 W:0 | mipstx39/jmr3904: deviceio01.exe
Result: invalid
Time: 0:00:00.262218 deviceio01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103d0
=> Loading section .init, size 0x48 lma ffffffff88010440
=> Loading section .fini, size 0x30 lma ffffffff88010488
=> Loading section .ctors, size 0x8 lma ffffffff880104b8
=> Loading section .dtors, size 0x8 lma ffffffff880104c0
=> Loading section .rdata, size 0x1b0d lma ffffffff880104d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fe0
=> Loading section .data, size 0x430 lma ffffffff88011ff8
=> Start address ffffffff88000004
=> Transfer rate: 598248 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 88/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:84 W:0 | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid
Time: 0:00:00.252307 devnullfatal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffc0
=> Loading section .init, size 0x48 lma ffffffff88010030
=> Loading section .fini, size 0x30 lma ffffffff88010078
=> Loading section .ctors, size 0x8 lma ffffffff880100a8
=> Loading section .dtors, size 0x8 lma ffffffff880100b0
=> Loading section .rdata, size 0x1ee9 lma ffffffff880100c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fb0
=> Loading section .data, size 0x418 lma ffffffff88011fc8
=> Start address ffffffff88000004
=> Transfer rate: 597640 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 89/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:86 W:0 | mipstx39/jmr3904: dl01.exe
Result: invalid
Time: 0:00:00.255799 dl01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x278b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880278b0
=> Loading section .init, size 0x48 lma ffffffff88027920
=> Loading section .fini, size 0x30 lma ffffffff88027968
=> Loading section .ctors, size 0x8 lma ffffffff88027998
=> Loading section .dtors, size 0x8 lma ffffffff880279a0
=> Loading section .rdata, size 0xc0d8 lma ffffffff880279b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033a88
=> Loading section .data, size 0x604 lma ffffffff88033aa0
=> Start address ffffffff88000004
=> Transfer rate: 1705184 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 90/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:86 W:0 | mipstx39/jmr3904: dl02.exe
Result: invalid
Time: 0:00:00.273667 dl02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027910
=> Loading section .init, size 0x48 lma ffffffff88027980
=> Loading section .fini, size 0x30 lma ffffffff880279c8
=> Loading section .ctors, size 0x8 lma ffffffff880279f8
=> Loading section .dtors, size 0x8 lma ffffffff88027a00
=> Loading section .rdata, size 0xc0a8 lma ffffffff88027a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033ab8
=> Loading section .data, size 0x5f4 lma ffffffff88033ad0
=> Start address ffffffff88000004
=> Transfer rate: 1705440 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 91/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:87 W:0 | mipstx39/jmr3904: dl03.exe
Result: invalid
Time: 0:00:00.255095 dl03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1b2a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801b2a0
=> Loading section .init, size 0x48 lma ffffffff8801b310
=> Loading section .fini, size 0x30 lma ffffffff8801b358
=> Loading section .ctors, size 0x8 lma ffffffff8801b388
=> Loading section .dtors, size 0x8 lma ffffffff8801b390
=> Loading section .rdata, size 0x2d30 lma ffffffff8801b3a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e0d0
=> Loading section .data, size 0x62c lma ffffffff8801e0e8
=> Start address ffffffff88000004
=> Transfer rate: 997472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 92/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:86 W:0 | mipstx39/jmr3904: dl04.exe
Result: invalid
Time: 0:00:00.253432 dl04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27350 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027350
=> Loading section .init, size 0x48 lma ffffffff880273c0
=> Loading section .fini, size 0x30 lma ffffffff88027408
=> Loading section .ctors, size 0x8 lma ffffffff88027438
=> Loading section .dtors, size 0x8 lma ffffffff88027440
=> Loading section .rdata, size 0xbfa0 lma ffffffff88027450
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880333f0
=> Loading section .data, size 0x5e4 lma ffffffff88033410
=> Start address ffffffff88000004
=> Transfer rate: 1691424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 93/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl05.exe
Result: invalid
Time: 0:00:00.261989 dl05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x3beec lma ffffffff88000000
=> Loading section .rtemsroset, size 0x84 lma ffffffff8803beec
=> Loading section .init, size 0x48 lma ffffffff8803bf70
=> Loading section .fini, size 0x30 lma ffffffff8803bfb8
=> Loading section .ctors, size 0x18 lma ffffffff8803bfe8
=> Loading section .dtors, size 0x8 lma ffffffff8803c000
=> Loading section .rdata, size 0xfa64 lma ffffffff8803c010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8804ba78
=> Loading section .rel.dyn, size 0x18 lma ffffffff8804ba90
=> Loading section .data, size 0x69c lma ffffffff8804bab0
=> Loading section .sdata, size 0x4 lma ffffffff8804c150
=> Start address ffffffff88000004
=> Transfer rate: 2492896 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 94/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl06.exe
Result: invalid
Time: 0:00:00.256865 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27890 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027890
=> Loading section .init, size 0x48 lma ffffffff88027900
=> Loading section .fini, size 0x30 lma ffffffff88027948
=> Loading section .ctors, size 0x8 lma ffffffff88027978
=> Loading section .dtors, size 0x8 lma ffffffff88027980
=> Loading section .rdata, size 0xe8a8 lma ffffffff88027990
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88036238
=> Loading section .data, size 0x5f4 lma ffffffff88036250
=> Start address ffffffff88000004
=> Transfer rate: 1786336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 95/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl07.exe
Result: invalid
Time: 0:00:00.253580 dl07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28780 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028780
=> Loading section .init, size 0x48 lma ffffffff880287f0
=> Loading section .fini, size 0x30 lma ffffffff88028838
=> Loading section .ctors, size 0x8 lma ffffffff88028868
=> Loading section .dtors, size 0x8 lma ffffffff88028870
=> Loading section .rdata, size 0x11298 lma ffffffff88028880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88039b18
=> Loading section .data, size 0x5e4 lma ffffffff88039b30
=> Start address ffffffff88000004
=> Transfer rate: 1902688 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 96/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:90 W:0 | mipstx39/jmr3904: dl08.exe
Result: invalid
Time: 0:00:00.263485 dl08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x283b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880283b0
=> Loading section .init, size 0x48 lma ffffffff88028420
=> Loading section .fini, size 0x30 lma ffffffff88028468
=> Loading section .ctors, size 0x8 lma ffffffff88028498
=> Loading section .dtors, size 0x8 lma ffffffff880284a0
=> Loading section .rdata, size 0x11198 lma ffffffff880284b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88039648
=> Loading section .data, size 0x5e4 lma ffffffff88039660
=> Start address ffffffff88000004
=> Transfer rate: 1892832 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 97/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:92 W:0 | mipstx39/jmr3904: dl09.exe
Result: invalid
Time: 0:00:00.254262 dl09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28760 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028760
=> Loading section .init, size 0x48 lma ffffffff880287d0
=> Loading section .fini, size 0x30 lma ffffffff88028818
=> Loading section .ctors, size 0x8 lma ffffffff88028848
=> Loading section .dtors, size 0x8 lma ffffffff88028850
=> Loading section .rdata, size 0x11268 lma ffffffff88028860
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88039ac8
=> Loading section .data, size 0x5e4 lma ffffffff88039ae0
=> Start address ffffffff88000004
=> Transfer rate: 1902048 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 98/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:93 W:0 | mipstx39/jmr3904: dl10.exe
Result: invalid
Time: 0:00:00.254714 dl10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x7a380 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8807a380
=> Loading section .init, size 0x48 lma ffffffff8807a400
=> Loading section .fini, size 0x30 lma ffffffff8807a448
=> Loading section .ctors, size 0x8 lma ffffffff8807a478
=> Loading section .dtors, size 0x8 lma ffffffff8807a480
=> Loading section .rdata, size 0x216e0 lma ffffffff8807a490
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8809bb70
=> Loading section .data, size 0x1808 lma ffffffff8809bb90
=> Start address ffffffff88000004
=> Transfer rate: 5151808 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 99/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:93 W:0 | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid
Time: 0:00:00.256568 dumpbuf01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe80
=> Loading section .init, size 0x48 lma ffffffff8800fef0
=> Loading section .fini, size 0x30 lma ffffffff8800ff38
=> Loading section .ctors, size 0x8 lma ffffffff8800ff68
=> Loading section .dtors, size 0x8 lma ffffffff8800ff70
=> Loading section .rdata, size 0x1b08 lma ffffffff8800ff80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a88
=> Loading section .data, size 0x440 lma ffffffff88011aa0
=> Start address ffffffff88000004
=> Transfer rate: 587456 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[100/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:95 W:0 | mipstx39/jmr3904: exit01.exe
Result: invalid
Time: 0:00:00.256188 exit01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010060
=> Loading section .init, size 0x48 lma ffffffff880100d0
=> Loading section .fini, size 0x30 lma ffffffff88010118
=> Loading section .ctors, size 0x8 lma ffffffff88010148
=> Loading section .dtors, size 0x8 lma ffffffff88010150
=> Loading section .rdata, size 0x1a8d lma ffffffff88010160
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bf0
=> Loading section .data, size 0x418 lma ffffffff88011c08
=> Start address ffffffff88000004
=> Transfer rate: 589992 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[101/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:97 W:0 | mipstx39/jmr3904: exit02.exe
Result: invalid
Time: 0:00:00.257722 exit02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd50
=> Loading section .init, size 0x48 lma ffffffff8800fdc0
=> Loading section .fini, size 0x30 lma ffffffff8800fe08
=> Loading section .ctors, size 0x8 lma ffffffff8800fe38
=> Loading section .dtors, size 0x8 lma ffffffff8800fe40
=> Loading section .rdata, size 0x1a4d lma ffffffff8800fe50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118a0
=> Loading section .data, size 0x418 lma ffffffff880118b8
=> Start address ffffffff88000004
=> Transfer rate: 583208 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[102/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:97 W:0 | mipstx39/jmr3904: exit03.exe
Result: invalid
Time: 0:00:00.504080 exit03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x966e8 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x78 lma ffffffff880966e8
=> Loading section .init, size 0x48 lma ffffffff88096760
=> Loading section .fini, size 0x30 lma ffffffff880967a8
=> Loading section .ctors, size 0x34 lma ffffffff880967d8
=> Loading section .dtors, size 0x8 lma ffffffff8809680c
=> Loading section .rdata, size 0xa42c lma ffffffff88096820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a0c50
=> Loading section .rel.dyn, size 0x20 lma ffffffff880a0c68
=> Loading section .data, size 0x730 lma ffffffff880a0c88
=> Loading section .sdata, size 0x4 lma ffffffff880a13b8
=> Start address ffffffff88000004
=> Transfer rate: 5283168 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[103/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:99 W:0 | mipstx39/jmr3904: flashdisk01.exe
Result: invalid
Time: 0:00:00.261184 flashdisk01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x30010 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88030010
=> Loading section .init, size 0x48 lma ffffffff88030080
=> Loading section .fini, size 0x30 lma ffffffff880300c8
=> Loading section .ctors, size 0x8 lma ffffffff880300f8
=> Loading section .dtors, size 0x8 lma ffffffff88030100
=> Loading section .rdata, size 0x62e4 lma ffffffff88030110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880363f8
=> Loading section .data, size 0x5d0 lma ffffffff88036410
=> Start address ffffffff88000004
=> Transfer rate: 1789600 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[104/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:98 W:0 | mipstx39/jmr3904: getentropy01.exe
Result: invalid
Time: 0:00:00.256554 getentropy01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf490 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f490
=> Loading section .init, size 0x48 lma ffffffff8800f500
=> Loading section .fini, size 0x30 lma ffffffff8800f548
=> Loading section .ctors, size 0x8 lma ffffffff8800f578
=> Loading section .dtors, size 0x8 lma ffffffff8800f580
=> Loading section .rdata, size 0x1a05 lma ffffffff8800f590
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f98
=> Loading section .data, size 0x408 lma ffffffff88010fb0
=> Start address ffffffff88000004
=> Transfer rate: 564584 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[105/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:100 W:0 | mipstx39/jmr3904: heapwalk.exe
Result: invalid
Time: 0:00:00.254619 heapwalk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109e0
=> Loading section .init, size 0x48 lma ffffffff88010a50
=> Loading section .fini, size 0x30 lma ffffffff88010a98
=> Loading section .ctors, size 0x8 lma ffffffff88010ac8
=> Loading section .dtors, size 0x8 lma ffffffff88010ad0
=> Loading section .rdata, size 0x240d lma ffffffff88010ae0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ef0
=> Loading section .data, size 0x418 lma ffffffff88012f08
=> Start address ffffffff88000004
=> Transfer rate: 628904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[106/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:102 W:0 | mipstx39/jmr3904: i2c01.exe
Result: invalid
Time: 0:00:00.257989 i2c01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14f40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014f40
=> Loading section .init, size 0x48 lma ffffffff88014fb0
=> Loading section .fini, size 0x30 lma ffffffff88014ff8
=> Loading section .ctors, size 0x8 lma ffffffff88015028
=> Loading section .dtors, size 0x8 lma ffffffff88015030
=> Loading section .rdata, size 0x1fc1 lma ffffffff88015040
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017008
=> Loading section .data, size 0x448 lma ffffffff88017020
=> Start address ffffffff88000004
=> Transfer rate: 762568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[107/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:102 W:0 | mipstx39/jmr3904: irqs01.exe
Result: invalid
Time: 0:00:00.258327 irqs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16ce0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff88016ce0
=> Loading section .init, size 0x48 lma ffffffff88016d70
=> Loading section .fini, size 0x30 lma ffffffff88016db8
=> Loading section .ctors, size 0x8 lma ffffffff88016de8
=> Loading section .dtors, size 0x8 lma ffffffff88016df0
=> Loading section .rdata, size 0x24c0 lma ffffffff88016e00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880192c0
=> Loading section .data, size 0x490 lma ffffffff880192d8
=> Start address ffffffff88000004
=> Transfer rate: 834304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[108/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:102 W:0 | mipstx39/jmr3904: libfdt01.exe
Result: invalid
Time: 0:00:00.255834 libfdt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11570 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011570
=> Loading section .init, size 0x48 lma ffffffff880115e0
=> Loading section .fini, size 0x30 lma ffffffff88011628
=> Loading section .ctors, size 0x8 lma ffffffff88011658
=> Loading section .dtors, size 0x8 lma ffffffff88011660
=> Loading section .rdata, size 0x1dc5 lma ffffffff88011670
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013438
=> Loading section .data, size 0x418 lma ffffffff88013450
=> Start address ffffffff88000004
=> Transfer rate: 639720 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[109/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:103 W:0 | mipstx39/jmr3904: malloc02.exe
Result: invalid
Time: 0:00:00.252579 malloc02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x101f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880101f0
=> Loading section .init, size 0x48 lma ffffffff88010260
=> Loading section .fini, size 0x30 lma ffffffff880102a8
=> Loading section .ctors, size 0x8 lma ffffffff880102d8
=> Loading section .dtors, size 0x8 lma ffffffff880102e0
=> Loading section .rdata, size 0x1e81 lma ffffffff880102f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012178
=> Loading section .data, size 0x448 lma ffffffff88012190
=> Start address ffffffff88000004
=> Transfer rate: 601672 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[110/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:103 W:0 | mipstx39/jmr3904: malloc03.exe
Result: invalid
Time: 0:00:00.252977 malloc03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xeff0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800eff0
=> Loading section .init, size 0x48 lma ffffffff8800f060
=> Loading section .fini, size 0x30 lma ffffffff8800f0a8
=> Loading section .ctors, size 0x8 lma ffffffff8800f0d8
=> Loading section .dtors, size 0x8 lma ffffffff8800f0e0
=> Loading section .rdata, size 0x19b1 lma ffffffff8800f0f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010aa8
=> Loading section .data, size 0x408 lma ffffffff88010ac0
=> Start address ffffffff88000004
=> Transfer rate: 554440 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[111/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: malloc04.exe
Result: invalid
Time: 0:00:00.252012 malloc04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10750 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010750
=> Loading section .init, size 0x48 lma ffffffff880107c0
=> Loading section .fini, size 0x30 lma ffffffff88010808
=> Loading section .ctors, size 0x8 lma ffffffff88010838
=> Loading section .dtors, size 0x8 lma ffffffff88010840
=> Loading section .rdata, size 0x1a81 lma ffffffff88010850
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122d8
=> Loading section .data, size 0x418 lma ffffffff880122f0
=> Start address ffffffff88000004
=> Transfer rate: 604104 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[112/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: malloctest.exe
Result: invalid
Time: 0:00:00.260438 malloctest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016830
=> Loading section .init, size 0x48 lma ffffffff880168a0
=> Loading section .fini, size 0x30 lma ffffffff880168e8
=> Loading section .ctors, size 0x8 lma ffffffff88016918
=> Loading section .dtors, size 0x8 lma ffffffff88016920
=> Loading section .rdata, size 0x409c lma ffffffff88016930
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a9d0
=> Loading section .data, size 0x5f0 lma ffffffff8801a9e8
=> Start address ffffffff88000004
=> Transfer rate: 884320 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[113/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: math.exe
Result: invalid
Time: 0:00:00.254501 math.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x273a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880273a0
=> Loading section .init, size 0x48 lma ffffffff88027410
=> Loading section .fini, size 0x30 lma ffffffff88027458
=> Loading section .ctors, size 0x8 lma ffffffff88027488
=> Loading section .dtors, size 0x8 lma ffffffff88027490
=> Loading section .rdata, size 0x3960 lma ffffffff880274a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802ae00
=> Loading section .data, size 0x5d0 lma ffffffff8802ae18
=> Start address ffffffff88000004
=> Transfer rate: 1416960 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[114/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: mathf.exe
Result: invalid
Time: 0:00:00.257237 mathf.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x238d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880238d0
=> Loading section .init, size 0x48 lma ffffffff88023940
=> Loading section .fini, size 0x30 lma ffffffff88023988
=> Loading section .ctors, size 0x8 lma ffffffff880239b8
=> Loading section .dtors, size 0x8 lma ffffffff880239c0
=> Loading section .rdata, size 0x32d0 lma ffffffff880239d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026ca0
=> Loading section .data, size 0x5b8 lma ffffffff88026cb8
=> Start address ffffffff88000004
=> Transfer rate: 1282880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[115/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: mathl.exe
Result: invalid
Time: 0:00:00.261421 mathl.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17720 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017720
=> Loading section .init, size 0x48 lma ffffffff88017790
=> Loading section .fini, size 0x30 lma ffffffff880177d8
=> Loading section .ctors, size 0x8 lma ffffffff88017808
=> Loading section .dtors, size 0x8 lma ffffffff88017810
=> Loading section .rdata, size 0x1fb0 lma ffffffff88017820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880197d0
=> Loading section .data, size 0x5a8 lma ffffffff880197e8
=> Start address ffffffff88000004
=> Transfer rate: 846912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[116/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: md501.exe
Result: invalid
Time: 0:00:00.258525 md501.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10de0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010de0
=> Loading section .init, size 0x48 lma ffffffff88010e50
=> Loading section .fini, size 0x30 lma ffffffff88010e98
=> Loading section .ctors, size 0x8 lma ffffffff88010ec8
=> Loading section .dtors, size 0x8 lma ffffffff88010ed0
=> Loading section .rdata, size 0x1c75 lma ffffffff88010ee0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b58
=> Loading section .data, size 0x458 lma ffffffff88012b70
=> Start address ffffffff88000004
=> Transfer rate: 622056 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[117/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: monitor.exe
Result: invalid
Time: 0:00:00.254020 monitor.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27630 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027630
=> Loading section .init, size 0x48 lma ffffffff880276a0
=> Loading section .fini, size 0x30 lma ffffffff880276e8
=> Loading section .ctors, size 0x8 lma ffffffff88027718
=> Loading section .dtors, size 0x8 lma ffffffff88027720
=> Loading section .rdata, size 0x4920 lma ffffffff88027730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c050
=> Loading section .data, size 0x7c8 lma ffffffff8802c068
=> Start address ffffffff88000004
=> Transfer rate: 1458496 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[118/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: monitor02.exe
Result: invalid
Time: 0:00:00.254165 monitor02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20090 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88020090
=> Loading section .init, size 0x48 lma ffffffff88020110
=> Loading section .fini, size 0x30 lma ffffffff88020158
=> Loading section .ctors, size 0x8 lma ffffffff88020188
=> Loading section .dtors, size 0x8 lma ffffffff88020190
=> Loading section .rdata, size 0x373c lma ffffffff880201a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880238e0
=> Loading section .data, size 0x850 lma ffffffff880238f8
=> Start address ffffffff88000004
=> Transfer rate: 1182176 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[119/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:111 W:0 | mipstx39/jmr3904: mouse01.exe
Result: invalid
Time: 0:00:00.252561 mouse01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c5b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801c5b0
=> Loading section .init, size 0x48 lma ffffffff8801c630
=> Loading section .fini, size 0x30 lma ffffffff8801c678
=> Loading section .ctors, size 0x8 lma ffffffff8801c6a8
=> Loading section .dtors, size 0x8 lma ffffffff8801c6b0
=> Loading section .rdata, size 0x28f4 lma ffffffff8801c6c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801efb8
=> Loading section .data, size 0x648 lma ffffffff8801efd0
=> Start address ffffffff88000004
=> Transfer rate: 1028192 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[120/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: newlib01.exe
Result: invalid
Time: 0:00:00.254927 newlib01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015160
=> Loading section .init, size 0x48 lma ffffffff880151d0
=> Loading section .fini, size 0x30 lma ffffffff88015218
=> Loading section .ctors, size 0x8 lma ffffffff88015248
=> Loading section .dtors, size 0x8 lma ffffffff88015250
=> Loading section .rdata, size 0x1d59 lma ffffffff88015260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016fc0
=> Loading section .data, size 0x458 lma ffffffff88016fd8
=> Start address ffffffff88000004
=> Transfer rate: 762120 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[121/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: ofw01.exe
Result: invalid
Time: 0:00:00.260061 ofw01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012940
=> Loading section .init, size 0x48 lma ffffffff880129b0
=> Loading section .fini, size 0x30 lma ffffffff880129f8
=> Loading section .ctors, size 0x8 lma ffffffff88012a28
=> Loading section .dtors, size 0x8 lma ffffffff88012a30
=> Loading section .rdata, size 0x1fd9 lma ffffffff88012a40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a20
=> Loading section .data, size 0x418 lma ffffffff88014a38
=> Start address ffffffff88000004
=> Transfer rate: 684552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[122/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: putenvtest.exe
Result: invalid
Time: 0:00:00.252173 putenvtest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10710 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010710
=> Loading section .init, size 0x48 lma ffffffff88010780
=> Loading section .fini, size 0x30 lma ffffffff880107c8
=> Loading section .ctors, size 0x8 lma ffffffff880107f8
=> Loading section .dtors, size 0x8 lma ffffffff88010800
=> Loading section .rdata, size 0x19c9 lma ffffffff88010810
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121e0
=> Loading section .data, size 0x41c lma ffffffff880121f8
=> Start address ffffffff88000004
=> Transfer rate: 602152 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[123/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid
Time: 0:00:00.258384 pwdgrp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14030 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014030
=> Loading section .init, size 0x48 lma ffffffff880140a0
=> Loading section .fini, size 0x30 lma ffffffff880140e8
=> Loading section .ctors, size 0x8 lma ffffffff88014118
=> Loading section .dtors, size 0x8 lma ffffffff88014120
=> Loading section .rdata, size 0x1de8 lma ffffffff88014130
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015f18
=> Loading section .data, size 0x4a0 lma ffffffff88015f30
=> Start address ffffffff88000004
=> Transfer rate: 728640 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[124/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid
Time: 0:00:00.259649 pwdgrp02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12bf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012bf0
=> Loading section .init, size 0x48 lma ffffffff88012c60
=> Loading section .fini, size 0x30 lma ffffffff88012ca8
=> Loading section .ctors, size 0x8 lma ffffffff88012cd8
=> Loading section .dtors, size 0x8 lma ffffffff88012ce0
=> Loading section .rdata, size 0x1d60 lma ffffffff88012cf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a50
=> Loading section .data, size 0x438 lma ffffffff88014a68
=> Start address ffffffff88000004
=> Transfer rate: 685248 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[125/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: rbheap01.exe
Result: invalid
Time: 0:00:00.255948 rbheap01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f10
=> Loading section .init, size 0x48 lma ffffffff88010f80
=> Loading section .fini, size 0x30 lma ffffffff88010fc8
=> Loading section .ctors, size 0x8 lma ffffffff88010ff8
=> Loading section .dtors, size 0x8 lma ffffffff88011000
=> Loading section .rdata, size 0x1cc5 lma ffffffff88011010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cd8
=> Loading section .data, size 0x418 lma ffffffff88012cf0
=> Start address ffffffff88000004
=> Transfer rate: 624616 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[126/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: rcxx01.exe
Result: invalid
Time: 0:00:00.252837 rcxx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x9af9c lma ffffffff88000000
=> Loading section .rtemsroset, size 0x84 lma ffffffff8809af9c
=> Loading section .init, size 0x48 lma ffffffff8809b020
=> Loading section .fini, size 0x30 lma ffffffff8809b068
=> Loading section .ctors, size 0x44 lma ffffffff8809b098
=> Loading section .dtors, size 0x8 lma ffffffff8809b0dc
=> Loading section .rdata, size 0xab54 lma ffffffff8809b0f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a5c48
=> Loading section .rel.dyn, size 0x18 lma ffffffff880a5c60
=> Loading section .data, size 0x7b0 lma ffffffff880a5c78
=> Loading section .sdata, size 0x4 lma ffffffff880a6428
=> Start address ffffffff88000004
=> Transfer rate: 5447904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[127/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:119 W:0 | mipstx39/jmr3904: record01.exe
Result: invalid
Time: 0:00:00.252478 record01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ea0
=> Loading section .init, size 0x48 lma ffffffff88010f10
=> Loading section .fini, size 0x30 lma ffffffff88010f58
=> Loading section .ctors, size 0x8 lma ffffffff88010f88
=> Loading section .dtors, size 0x8 lma ffffffff88010f90
=> Loading section .rdata, size 0x1ead lma ffffffff88010fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e50
=> Loading section .data, size 0x418 lma ffffffff88012e68
=> Start address ffffffff88000004
=> Transfer rate: 627624 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[128/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: record02.exe
Result: invalid
Time: 0:00:00.259171 record02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18d50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018d50
=> Loading section .init, size 0x48 lma ffffffff88018dd0
=> Loading section .fini, size 0x30 lma ffffffff88018e18
=> Loading section .ctors, size 0x8 lma ffffffff88018e48
=> Loading section .dtors, size 0x8 lma ffffffff88018e50
=> Loading section .rdata, size 0x8be1 lma ffffffff88018e60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021a48
=> Loading section .data, size 0x450 lma ffffffff88021a60
=> Start address ffffffff88000004
=> Transfer rate: 1111304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[129/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: rtmonuse.exe
Result: invalid
Time: 0:00:00.261940 rtmonuse.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880120b0
=> Loading section .init, size 0x48 lma ffffffff88012120
=> Loading section .fini, size 0x30 lma ffffffff88012168
=> Loading section .ctors, size 0x8 lma ffffffff88012198
=> Loading section .dtors, size 0x8 lma ffffffff880121a0
=> Loading section .rdata, size 0x2310 lma ffffffff880121b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144c0
=> Loading section .data, size 0x490 lma ffffffff880144d8
=> Start address ffffffff88000004
=> Transfer rate: 674560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[130/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: sha.exe
Result: invalid
Time: 0:00:00.255137 sha.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1b6e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801b6e0
=> Loading section .init, size 0x48 lma ffffffff8801b750
=> Loading section .fini, size 0x30 lma ffffffff8801b798
=> Loading section .ctors, size 0x8 lma ffffffff8801b7c8
=> Loading section .dtors, size 0x8 lma ffffffff8801b7d0
=> Loading section .rdata, size 0x1f09 lma ffffffff8801b7e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d6f0
=> Loading section .data, size 0x408 lma ffffffff8801d708
=> Start address ffffffff88000004
=> Transfer rate: 972808 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[131/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: shell01.exe
Result: invalid
Time: 0:00:00.256051 shell01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x315a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880315a0
=> Loading section .init, size 0x48 lma ffffffff88031620
=> Loading section .fini, size 0x30 lma ffffffff88031668
=> Loading section .ctors, size 0x8 lma ffffffff88031698
=> Loading section .dtors, size 0x8 lma ffffffff880316a0
=> Loading section .rdata, size 0x5ed0 lma ffffffff880316b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88037580
=> Loading section .data, size 0x948 lma ffffffff88037598
=> Start address ffffffff88000004
=> Transfer rate: 1832640 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[132/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid
Time: 0:00:00.251683 sparsedisk01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x165f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880165f0
=> Loading section .init, size 0x48 lma ffffffff88016660
=> Loading section .fini, size 0x30 lma ffffffff880166a8
=> Loading section .ctors, size 0x8 lma ffffffff880166d8
=> Loading section .dtors, size 0x8 lma ffffffff880166e0
=> Loading section .rdata, size 0x1d31 lma ffffffff880166f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018428
=> Loading section .data, size 0x440 lma ffffffff88018440
=> Start address ffffffff88000004
=> Transfer rate: 803720 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[133/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: spi01.exe
Result: invalid
Time: 0:00:00.252912 spi01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x116b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880116b0
=> Loading section .init, size 0x48 lma ffffffff88011720
=> Loading section .fini, size 0x30 lma ffffffff88011768
=> Loading section .ctors, size 0x8 lma ffffffff88011798
=> Loading section .dtors, size 0x8 lma ffffffff880117a0
=> Loading section .rdata, size 0x1c79 lma ffffffff880117b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013430
=> Loading section .data, size 0x458 lma ffffffff88013448
=> Start address ffffffff88000004
=> Transfer rate: 640136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[134/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: stackchk.exe
Result: invalid
Time: 0:00:00.252776 stackchk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11d60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011d60
=> Loading section .init, size 0x48 lma ffffffff88011dd0
=> Loading section .fini, size 0x30 lma ffffffff88011e18
=> Loading section .ctors, size 0x8 lma ffffffff88011e48
=> Loading section .dtors, size 0x8 lma ffffffff88011e50
=> Loading section .rdata, size 0x22e0 lma ffffffff88011e60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014140
=> Loading section .data, size 0x5c0 lma ffffffff88014158
=> Start address ffffffff88000004
=> Transfer rate: 669824 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[135/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:127 W:0 | mipstx39/jmr3904: stackchk01.exe
Result: invalid
Time: 0:00:00.257124 stackchk01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf390 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f390
=> Loading section .init, size 0x48 lma ffffffff8800f400
=> Loading section .fini, size 0x30 lma ffffffff8800f448
=> Loading section .ctors, size 0x8 lma ffffffff8800f478
=> Loading section .dtors, size 0x8 lma ffffffff8800f480
=> Loading section .rdata, size 0x1ad9 lma ffffffff8800f490
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f70
=> Loading section .data, size 0x408 lma ffffffff88010f88
=> Start address ffffffff88000004
=> Transfer rate: 564232 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[136/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: stackchk02.exe
Result: invalid
Time: 0:00:00.274727 stackchk02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf280 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f280
=> Loading section .init, size 0x48 lma ffffffff8800f2f0
=> Loading section .fini, size 0x30 lma ffffffff8800f338
=> Loading section .ctors, size 0x8 lma ffffffff8800f368
=> Loading section .dtors, size 0x8 lma ffffffff8800f370
=> Loading section .rdata, size 0x1a25 lma ffffffff8800f380
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010da8
=> Loading section .data, size 0x408 lma ffffffff88010dc0
=> Start address ffffffff88000004
=> Transfer rate: 560616 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[137/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: stringto01.exe
Result: invalid
Time: 0:00:00.263556 stringto01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16a80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016a80
=> Loading section .init, size 0x48 lma ffffffff88016af0
=> Loading section .fini, size 0x30 lma ffffffff88016b38
=> Loading section .ctors, size 0x8 lma ffffffff88016b68
=> Loading section .dtors, size 0x8 lma ffffffff88016b70
=> Loading section .rdata, size 0x3a10 lma ffffffff88016b80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a590
=> Loading section .data, size 0x570 lma ffffffff8801a5a8
=> Start address ffffffff88000004
=> Transfer rate: 874624 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[138/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: tar01.exe
Result: invalid
Time: 0:00:00.264175 tar01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015fa0
=> Loading section .init, size 0x48 lma ffffffff88016010
=> Loading section .fini, size 0x30 lma ffffffff88016058
=> Loading section .ctors, size 0x8 lma ffffffff88016088
=> Loading section .dtors, size 0x8 lma ffffffff88016090
=> Loading section .rdata, size 0x86e8 lma ffffffff880160a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e788
=> Loading section .data, size 0x408 lma ffffffff8801e7a0
=> Start address ffffffff88000004
=> Transfer rate: 1006848 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[139/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: tar02.exe
Result: invalid
Time: 0:00:00.262788 tar02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11340 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011340
=> Loading section .init, size 0x48 lma ffffffff880113b0
=> Loading section .fini, size 0x30 lma ffffffff880113f8
=> Loading section .ctors, size 0x8 lma ffffffff88011428
=> Loading section .dtors, size 0x8 lma ffffffff88011430
=> Loading section .rdata, size 0x52dc lma ffffffff88011440
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016720
=> Loading section .data, size 0x408 lma ffffffff88016740
=> Start address ffffffff88000004
=> Transfer rate: 743840 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[140/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: tar03.exe
Result: invalid
Time: 0:00:00.260867 tar03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110e0
=> Loading section .init, size 0x48 lma ffffffff88011150
=> Loading section .fini, size 0x30 lma ffffffff88011198
=> Loading section .ctors, size 0x8 lma ffffffff880111c8
=> Loading section .dtors, size 0x8 lma ffffffff880111d0
=> Loading section .rdata, size 0x2534 lma ffffffff880111e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013718
=> Loading section .data, size 0x418 lma ffffffff88013730
=> Start address ffffffff88000004
=> Transfer rate: 645600 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[141/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: termios.exe
Result: invalid
Time: 0:00:00.252988 termios.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x24900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88024900
=> Loading section .init, size 0x48 lma ffffffff88024970
=> Loading section .fini, size 0x30 lma ffffffff880249b8
=> Loading section .ctors, size 0x8 lma ffffffff880249e8
=> Loading section .dtors, size 0x8 lma ffffffff880249f0
=> Loading section .rdata, size 0x4464 lma ffffffff88024a00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028e68
=> Loading section .data, size 0x598 lma ffffffff88028e80
=> Start address ffffffff88000004
=> Transfer rate: 1351776 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[142/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: termios01.exe
Result: invalid
Time: 0:00:00.253291 termios01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17290 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017290
=> Loading section .init, size 0x48 lma ffffffff88017300
=> Loading section .fini, size 0x30 lma ffffffff88017348
=> Loading section .ctors, size 0x8 lma ffffffff88017378
=> Loading section .dtors, size 0x8 lma ffffffff88017380
=> Loading section .rdata, size 0x3acc lma ffffffff88017390
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ae60
=> Loading section .data, size 0x4d0 lma ffffffff8801ae78
=> Start address ffffffff88000004
=> Transfer rate: 891360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[143/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:135 W:0 | mipstx39/jmr3904: termios02.exe
Result: invalid
Time: 0:00:00.253091 termios02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013510
=> Loading section .init, size 0x48 lma ffffffff88013580
=> Loading section .fini, size 0x30 lma ffffffff880135c8
=> Loading section .ctors, size 0x8 lma ffffffff880135f8
=> Loading section .dtors, size 0x8 lma ffffffff88013600
=> Loading section .rdata, size 0x1e14 lma ffffffff88013610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015428
=> Loading section .data, size 0x408 lma ffffffff88015440
=> Start address ffffffff88000004
=> Transfer rate: 704992 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[144/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios03.exe
Result: invalid
Time: 0:00:00.259659 termios03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014510
=> Loading section .init, size 0x48 lma ffffffff88014580
=> Loading section .fini, size 0x30 lma ffffffff880145c8
=> Loading section .ctors, size 0x8 lma ffffffff880145f8
=> Loading section .dtors, size 0x8 lma ffffffff88014600
=> Loading section .rdata, size 0x2204 lma ffffffff88014610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016818
=> Loading section .data, size 0x458 lma ffffffff88016830
=> Start address ffffffff88000004
=> Transfer rate: 746464 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[145/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios04.exe
Result: invalid
Time: 0:00:00.254870 termios04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014860
=> Loading section .init, size 0x48 lma ffffffff880148e0
=> Loading section .fini, size 0x30 lma ffffffff88014928
=> Loading section .ctors, size 0x8 lma ffffffff88014958
=> Loading section .dtors, size 0x8 lma ffffffff88014960
=> Loading section .rdata, size 0x2140 lma ffffffff88014970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ab0
=> Loading section .data, size 0x488 lma ffffffff88016ac8
=> Start address ffffffff88000004
=> Transfer rate: 752192 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[146/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios05.exe
Result: invalid
Time: 0:00:00.259709 termios05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14c10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014c10
=> Loading section .init, size 0x48 lma ffffffff88014c90
=> Loading section .fini, size 0x30 lma ffffffff88014cd8
=> Loading section .ctors, size 0x8 lma ffffffff88014d08
=> Loading section .dtors, size 0x8 lma ffffffff88014d10
=> Loading section .rdata, size 0x21a4 lma ffffffff88014d20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ec8
=> Loading section .data, size 0x488 lma ffffffff88016ee0
=> Start address ffffffff88000004
=> Transfer rate: 760544 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[147/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios06.exe
Result: invalid
Time: 0:00:00.257456 termios06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014910
=> Loading section .init, size 0x48 lma ffffffff88014980
=> Loading section .fini, size 0x30 lma ffffffff880149c8
=> Loading section .ctors, size 0x8 lma ffffffff880149f8
=> Loading section .dtors, size 0x8 lma ffffffff88014a00
=> Loading section .rdata, size 0x22f4 lma ffffffff88014a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016d08
=> Loading section .data, size 0x468 lma ffffffff88016d20
=> Start address ffffffff88000004
=> Transfer rate: 756704 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[148/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios07.exe
Result: invalid
Time: 0:00:00.261765 termios07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14980 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014980
=> Loading section .init, size 0x48 lma ffffffff88014a00
=> Loading section .fini, size 0x30 lma ffffffff88014a48
=> Loading section .ctors, size 0x8 lma ffffffff88014a78
=> Loading section .dtors, size 0x8 lma ffffffff88014a80
=> Loading section .rdata, size 0x21c8 lma ffffffff88014a90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c58
=> Loading section .data, size 0x488 lma ffffffff88016c70
=> Start address ffffffff88000004
=> Transfer rate: 755584 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[149/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios08.exe
Result: invalid
Time: 0:00:00.253309 termios08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014140
=> Loading section .init, size 0x48 lma ffffffff880141b0
=> Loading section .fini, size 0x30 lma ffffffff880141f8
=> Loading section .ctors, size 0x8 lma ffffffff88014228
=> Loading section .dtors, size 0x8 lma ffffffff88014230
=> Loading section .rdata, size 0x2130 lma ffffffff88014240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016370
=> Loading section .data, size 0x458 lma ffffffff88016388
=> Start address ffffffff88000004
=> Transfer rate: 736960 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[150/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios09.exe
Result: invalid
Time: 0:00:00.253861 termios09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18bf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88018bf0
=> Loading section .init, size 0x48 lma ffffffff88018c60
=> Loading section .fini, size 0x30 lma ffffffff88018ca8
=> Loading section .ctors, size 0x8 lma ffffffff88018cd8
=> Loading section .dtors, size 0x8 lma ffffffff88018ce0
=> Loading section .rdata, size 0x2334 lma ffffffff88018cf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b028
=> Loading section .data, size 0x610 lma ffffffff8801b040
=> Start address ffffffff88000004
=> Transfer rate: 897568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[151/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:143 W:0 | mipstx39/jmr3904: termios10.exe
Result: invalid
Time: 0:00:00.254916 termios10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16300 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016300
=> Loading section .init, size 0x48 lma ffffffff88016380
=> Loading section .fini, size 0x30 lma ffffffff880163c8
=> Loading section .ctors, size 0x8 lma ffffffff880163f8
=> Loading section .dtors, size 0x8 lma ffffffff88016400
=> Loading section .rdata, size 0x23b0 lma ffffffff88016410
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880187c0
=> Loading section .data, size 0x4d8 lma ffffffff880187d8
=> Start address ffffffff88000004
=> Transfer rate: 812352 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[152/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: termios11.exe
Result: invalid
Time: 0:00:00.253673 termios11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x169d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880169d0
=> Loading section .init, size 0x48 lma ffffffff88016a50
=> Loading section .fini, size 0x30 lma ffffffff88016a98
=> Loading section .ctors, size 0x8 lma ffffffff88016ac8
=> Loading section .dtors, size 0x8 lma ffffffff88016ad0
=> Loading section .rdata, size 0x23c8 lma ffffffff88016ae0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018ea8
=> Loading section .data, size 0x508 lma ffffffff88018ec0
=> Start address ffffffff88000004
=> Transfer rate: 826880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[153/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: top.exe
Result: invalid
Time: 0:00:00.255381 top.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e9e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801e9e0
=> Loading section .init, size 0x48 lma ffffffff8801ea50
=> Loading section .fini, size 0x30 lma ffffffff8801ea98
=> Loading section .ctors, size 0x8 lma ffffffff8801eac8
=> Loading section .dtors, size 0x8 lma ffffffff8801ead0
=> Loading section .rdata, size 0x2c18 lma ffffffff8801eae0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880216f8
=> Loading section .data, size 0x5b4 lma ffffffff88021710
=> Start address ffffffff88000004
=> Transfer rate: 1107424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[154/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: ttest01.exe
Result: invalid
Time: 0:00:00.254826 ttest01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x25150 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb50 lma ffffffff88025150
=> Loading section .init, size 0x48 lma ffffffff88025ca0
=> Loading section .fini, size 0x30 lma ffffffff88025ce8
=> Loading section .ctors, size 0x8 lma ffffffff88025d18
=> Loading section .dtors, size 0x8 lma ffffffff88025d20
=> Loading section .rdata, size 0x1c204 lma ffffffff88025d30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88041f38
=> Loading section .data, size 0x1b48 lma ffffffff88041f50
=> Start address ffffffff88000004
=> Transfer rate: 2217056 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[155/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: ttest02.exe
Result: invalid
Time: 0:00:00.256359 ttest02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17870 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff88017870
=> Loading section .init, size 0x48 lma ffffffff88017900
=> Loading section .fini, size 0x30 lma ffffffff88017948
=> Loading section .ctors, size 0x8 lma ffffffff88017978
=> Loading section .dtors, size 0x8 lma ffffffff88017980
=> Loading section .rdata, size 0x2594 lma ffffffff88017990
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019f28
=> Loading section .data, size 0x588 lma ffffffff88019f40
=> Start address ffffffff88000004
=> Transfer rate: 861664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[156/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: tztest.exe
Result: invalid
Time: 0:00:00.251507 tztest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15bd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015bd0
=> Loading section .init, size 0x48 lma ffffffff88015c40
=> Loading section .fini, size 0x30 lma ffffffff88015c88
=> Loading section .ctors, size 0x8 lma ffffffff88015cb8
=> Loading section .dtors, size 0x8 lma ffffffff88015cc0
=> Loading section .rdata, size 0x2494 lma ffffffff88015cd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018168
=> Loading section .data, size 0x614 lma ffffffff88018180
=> Start address ffffffff88000004
=> Transfer rate: 801856 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[157/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: uid01.exe
Result: invalid
Time: 0:00:00.253325 uid01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c390 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801c390
=> Loading section .init, size 0x48 lma ffffffff8801c410
=> Loading section .fini, size 0x30 lma ffffffff8801c458
=> Loading section .ctors, size 0x8 lma ffffffff8801c488
=> Loading section .dtors, size 0x8 lma ffffffff8801c490
=> Loading section .rdata, size 0x2854 lma ffffffff8801c4a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ecf8
=> Loading section .data, size 0x648 lma ffffffff8801ed10
=> Start address ffffffff88000004
=> Transfer rate: 1022560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[158/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: utf8proc01.exe
Result: invalid
Time: 0:00:00.254811 utf8proc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011860
=> Loading section .init, size 0x48 lma ffffffff880118d0
=> Loading section .fini, size 0x30 lma ffffffff88011918
=> Loading section .ctors, size 0x8 lma ffffffff88011948
=> Loading section .dtors, size 0x8 lma ffffffff88011950
=> Loading section .rdata, size 0x6cf05 lma ffffffff88011960
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8807e868
=> Loading section .data, size 0x418 lma ffffffff8807e880
=> Start address ffffffff88000004
=> Transfer rate: 4154472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[159/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:151 W:0 | mipstx39/jmr3904: psx01.exe
Result: invalid
Time: 0:00:00.253918 psx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17010 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017010
=> Loading section .init, size 0x48 lma ffffffff88017080
=> Loading section .fini, size 0x30 lma ffffffff880170c8
=> Loading section .ctors, size 0x8 lma ffffffff880170f8
=> Loading section .dtors, size 0x8 lma ffffffff88017100
=> Loading section .rdata, size 0x24f0 lma ffffffff88017110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019600
=> Loading section .data, size 0x584 lma ffffffff88019618
=> Start address ffffffff88000004
=> Transfer rate: 842912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[160/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx02.exe
Result: invalid
Time: 0:00:00.254968 psx02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a180 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a180
=> Loading section .init, size 0x48 lma ffffffff8801a1f0
=> Loading section .fini, size 0x30 lma ffffffff8801a238
=> Loading section .ctors, size 0x8 lma ffffffff8801a268
=> Loading section .dtors, size 0x8 lma ffffffff8801a270
=> Loading section .rdata, size 0x25d8 lma ffffffff8801a280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c858
=> Loading section .data, size 0x618 lma ffffffff8801c870
=> Start address ffffffff88000004
=> Transfer rate: 947200 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[161/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx03.exe
Result: invalid
Time: 0:00:00.256472 psx03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a780 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a780
=> Loading section .init, size 0x48 lma ffffffff8801a7f0
=> Loading section .fini, size 0x30 lma ffffffff8801a838
=> Loading section .ctors, size 0x8 lma ffffffff8801a868
=> Loading section .dtors, size 0x8 lma ffffffff8801a870
=> Loading section .rdata, size 0x26e4 lma ffffffff8801a880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cf68
=> Loading section .data, size 0x618 lma ffffffff8801cf80
=> Start address ffffffff88000004
=> Transfer rate: 961632 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[162/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx04.exe
Result: invalid
Time: 0:00:00.254478 psx04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a360
=> Loading section .init, size 0x48 lma ffffffff8801a3d0
=> Loading section .fini, size 0x30 lma ffffffff8801a418
=> Loading section .ctors, size 0x8 lma ffffffff8801a448
=> Loading section .dtors, size 0x8 lma ffffffff8801a450
=> Loading section .rdata, size 0x3800 lma ffffffff8801a460
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801dc60
=> Loading section .data, size 0x644 lma ffffffff8801dc78
=> Start address ffffffff88000004
=> Transfer rate: 988576 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[163/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx05.exe
Result: invalid
Time: 0:00:00.255223 psx05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1bd00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801bd00
=> Loading section .init, size 0x48 lma ffffffff8801bd70
=> Loading section .fini, size 0x30 lma ffffffff8801bdb8
=> Loading section .ctors, size 0x8 lma ffffffff8801bde8
=> Loading section .dtors, size 0x8 lma ffffffff8801bdf0
=> Loading section .rdata, size 0x34c4 lma ffffffff8801be00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f2c8
=> Loading section .data, size 0x61c lma ffffffff8801f2e0
=> Start address ffffffff88000004
=> Transfer rate: 1034112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[164/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx06.exe
Result: invalid
Time: 0:00:00.253261 psx06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x178b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880178b0
=> Loading section .init, size 0x48 lma ffffffff88017920
=> Loading section .fini, size 0x30 lma ffffffff88017968
=> Loading section .ctors, size 0x8 lma ffffffff88017998
=> Loading section .dtors, size 0x8 lma ffffffff880179a0
=> Loading section .rdata, size 0x23d4 lma ffffffff880179b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019d88
=> Loading section .data, size 0x684 lma ffffffff88019da0
=> Start address ffffffff88000004
=> Transfer rate: 860352 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[165/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx07.exe
Result: invalid
Time: 0:00:00.252150 psx07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1bd80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801bd80
=> Loading section .init, size 0x48 lma ffffffff8801bdf0
=> Loading section .fini, size 0x30 lma ffffffff8801be38
=> Loading section .ctors, size 0x8 lma ffffffff8801be68
=> Loading section .dtors, size 0x8 lma ffffffff8801be70
=> Loading section .rdata, size 0x4ab4 lma ffffffff8801be80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020938
=> Loading section .data, size 0x61c lma ffffffff88020950
=> Start address ffffffff88000004
=> Transfer rate: 1080064 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[166/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx08.exe
Result: invalid
Time: 0:00:00.254013 psx08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17d30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017d30
=> Loading section .init, size 0x48 lma ffffffff88017da0
=> Loading section .fini, size 0x30 lma ffffffff88017de8
=> Loading section .ctors, size 0x8 lma ffffffff88017e18
=> Loading section .dtors, size 0x8 lma ffffffff88017e20
=> Loading section .rdata, size 0x2534 lma ffffffff88017e30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a368
=> Loading section .data, size 0x61c lma ffffffff8801a380
=> Start address ffffffff88000004
=> Transfer rate: 871552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[167/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:159 W:0 | mipstx39/jmr3904: psx09.exe
Result: invalid
Time: 0:00:00.251830 psx09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20090 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88020090
=> Loading section .init, size 0x48 lma ffffffff88020100
=> Loading section .fini, size 0x30 lma ffffffff88020148
=> Loading section .ctors, size 0x8 lma ffffffff88020178
=> Loading section .dtors, size 0x8 lma ffffffff88020180
=> Loading section .rdata, size 0x32ac lma ffffffff88020190
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023440
=> Loading section .data, size 0x610 lma ffffffff88023458
=> Start address ffffffff88000004
=> Transfer rate: 1168096 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[168/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx10.exe
Result: invalid
Time: 0:00:00.254956 psx10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13ba0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013ba0
=> Loading section .init, size 0x48 lma ffffffff88013c10
=> Loading section .fini, size 0x30 lma ffffffff88013c58
=> Loading section .ctors, size 0x8 lma ffffffff88013c88
=> Loading section .dtors, size 0x8 lma ffffffff88013c90
=> Loading section .rdata, size 0x2444 lma ffffffff88013ca0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880160e8
=> Loading section .data, size 0x424 lma ffffffff88016100
=> Start address ffffffff88000004
=> Transfer rate: 731328 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[169/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx11.exe
Result: invalid
Time: 0:00:00.253107 psx11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017060
=> Loading section .init, size 0x48 lma ffffffff880170d0
=> Loading section .fini, size 0x30 lma ffffffff88017118
=> Loading section .ctors, size 0x8 lma ffffffff88017148
=> Loading section .dtors, size 0x8 lma ffffffff88017150
=> Loading section .rdata, size 0x22a8 lma ffffffff88017160
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019408
=> Loading section .data, size 0x610 lma ffffffff88019420
=> Start address ffffffff88000004
=> Transfer rate: 840000 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[170/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx12.exe
Result: invalid
Time: 0:00:00.251502 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17800 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017800
=> Loading section .init, size 0x48 lma ffffffff88017870
=> Loading section .fini, size 0x30 lma ffffffff880178b8
=> Loading section .ctors, size 0x8 lma ffffffff880178e8
=> Loading section .dtors, size 0x8 lma ffffffff880178f0
=> Loading section .rdata, size 0x22bc lma ffffffff88017900
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019bc0
=> Loading section .data, size 0x61c lma ffffffff88019bd8
=> Start address ffffffff88000004
=> Transfer rate: 855872 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[171/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx13.exe
Result: invalid
Time: 0:00:00.260144 psx13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017680
=> Loading section .init, size 0x48 lma ffffffff880176f0
=> Loading section .fini, size 0x30 lma ffffffff88017738
=> Loading section .ctors, size 0x8 lma ffffffff88017768
=> Loading section .dtors, size 0x8 lma ffffffff88017770
=> Loading section .rdata, size 0x1c51 lma ffffffff88017780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880193d8
=> Loading section .data, size 0x420 lma ffffffff880193f0
=> Start address ffffffff88000004
=> Transfer rate: 835592 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[172/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx14.exe
Result: invalid
Time: 0:00:00.262986 psx14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010fa0
=> Loading section .init, size 0x48 lma ffffffff88011010
=> Loading section .fini, size 0x30 lma ffffffff88011058
=> Loading section .ctors, size 0x8 lma ffffffff88011088
=> Loading section .dtors, size 0x8 lma ffffffff88011090
=> Loading section .rdata, size 0x2171 lma ffffffff880110a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013218
=> Loading section .data, size 0x418 lma ffffffff88013230
=> Start address ffffffff88000004
=> Transfer rate: 635336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[173/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx15.exe
Result: invalid
Time: 0:00:00.252537 psx15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10050 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010050
=> Loading section .init, size 0x48 lma ffffffff880100c0
=> Loading section .fini, size 0x30 lma ffffffff88010108
=> Loading section .ctors, size 0x8 lma ffffffff88010138
=> Loading section .dtors, size 0x8 lma ffffffff88010140
=> Loading section .rdata, size 0x19fd lma ffffffff88010150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b50
=> Loading section .data, size 0x418 lma ffffffff88011b68
=> Start address ffffffff88000004
=> Transfer rate: 588712 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[174/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psx16.exe
Result: invalid
Time: 0:00:00.253405 psx16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x115d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880115d0
=> Loading section .init, size 0x48 lma ffffffff88011640
=> Loading section .fini, size 0x30 lma ffffffff88011688
=> Loading section .ctors, size 0x8 lma ffffffff880116b8
=> Loading section .dtors, size 0x8 lma ffffffff880116c0
=> Loading section .rdata, size 0x1b0c lma ffffffff880116d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131e0
=> Loading section .data, size 0x424 lma ffffffff880131f8
=> Start address ffffffff88000004
=> Transfer rate: 635008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[175/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:167 W:0 | mipstx39/jmr3904: psxaio01.exe
Result: invalid
Time: 0:00:00.252087 psxaio01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14b50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014b50
=> Loading section .init, size 0x48 lma ffffffff88014bc0
=> Loading section .fini, size 0x30 lma ffffffff88014c08
=> Loading section .ctors, size 0x8 lma ffffffff88014c38
=> Loading section .dtors, size 0x8 lma ffffffff88014c40
=> Loading section .rdata, size 0x1ca9 lma ffffffff88014c50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016900
=> Loading section .data, size 0x418 lma ffffffff88016918
=> Start address ffffffff88000004
=> Transfer rate: 747784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[176/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxaio02.exe
Result: invalid
Time: 0:00:00.256736 psxaio02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1aae0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801aae0
=> Loading section .init, size 0x48 lma ffffffff8801ab50
=> Loading section .fini, size 0x30 lma ffffffff8801ab98
=> Loading section .ctors, size 0x8 lma ffffffff8801abc8
=> Loading section .dtors, size 0x8 lma ffffffff8801abd0
=> Loading section .rdata, size 0x2510 lma ffffffff8801abe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d0f0
=> Loading section .data, size 0x584 lma ffffffff8801d108
=> Start address ffffffff88000004
=> Transfer rate: 963616 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[177/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxaio03.exe
Result: invalid
Time: 0:00:00.253503 psxaio03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a7a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a7a0
=> Loading section .init, size 0x48 lma ffffffff8801a810
=> Loading section .fini, size 0x30 lma ffffffff8801a858
=> Loading section .ctors, size 0x8 lma ffffffff8801a888
=> Loading section .dtors, size 0x8 lma ffffffff8801a890
=> Loading section .rdata, size 0x22d4 lma ffffffff8801a8a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cb78
=> Loading section .data, size 0x590 lma ffffffff8801cb90
=> Start address ffffffff88000004
=> Transfer rate: 952480 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[178/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxalarm01.exe
Result: invalid
Time: 0:00:00.253566 psxalarm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012e20
=> Loading section .init, size 0x48 lma ffffffff88012ea0
=> Loading section .fini, size 0x30 lma ffffffff88012ee8
=> Loading section .ctors, size 0x8 lma ffffffff88012f18
=> Loading section .dtors, size 0x8 lma ffffffff88012f20
=> Loading section .rdata, size 0x1ce8 lma ffffffff88012f30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c18
=> Loading section .data, size 0x464 lma ffffffff88014c30
=> Start address ffffffff88000004
=> Transfer rate: 689248 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[179/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid
Time: 0:00:00.257551 psxautoinit01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011190
=> Loading section .init, size 0x48 lma ffffffff88011200
=> Loading section .fini, size 0x30 lma ffffffff88011248
=> Loading section .ctors, size 0x8 lma ffffffff88011278
=> Loading section .dtors, size 0x8 lma ffffffff88011280
=> Loading section .rdata, size 0x2598 lma ffffffff88011290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013828
=> Loading section .data, size 0x408 lma ffffffff88013840
=> Start address ffffffff88000004
=> Transfer rate: 647680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[180/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid
Time: 0:00:00.252970 psxautoinit02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12df0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012df0
=> Loading section .init, size 0x48 lma ffffffff88012e60
=> Loading section .fini, size 0x30 lma ffffffff88012ea8
=> Loading section .ctors, size 0x8 lma ffffffff88012ed8
=> Loading section .dtors, size 0x8 lma ffffffff88012ee0
=> Loading section .rdata, size 0x26c0 lma ffffffff88012ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880155b0
=> Loading section .data, size 0x418 lma ffffffff880155c8
=> Start address ffffffff88000004
=> Transfer rate: 708288 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[181/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid
Time: 0:00:00.252639 psxbarrier01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012510
=> Loading section .init, size 0x48 lma ffffffff88012580
=> Loading section .fini, size 0x30 lma ffffffff880125c8
=> Loading section .ctors, size 0x8 lma ffffffff880125f8
=> Loading section .dtors, size 0x8 lma ffffffff88012600
=> Loading section .rdata, size 0x2174 lma ffffffff88012610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014788
=> Loading section .data, size 0x494 lma ffffffff880147a0
=> Start address ffffffff88000004
=> Transfer rate: 680256 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[182/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxcancel.exe
Result: invalid
Time: 0:00:00.253429 psxcancel.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14ef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014ef0
=> Loading section .init, size 0x48 lma ffffffff88014f60
=> Loading section .fini, size 0x30 lma ffffffff88014fa8
=> Loading section .ctors, size 0x8 lma ffffffff88014fd8
=> Loading section .dtors, size 0x8 lma ffffffff88014fe0
=> Loading section .rdata, size 0x28e0 lma ffffffff88014ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880178d0
=> Loading section .data, size 0x49c lma ffffffff880178e8
=> Start address ffffffff88000004
=> Transfer rate: 781280 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[183/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:175 W:0 | mipstx39/jmr3904: psxcancel01.exe
Result: invalid
Time: 0:00:00.253652 psxcancel01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11930 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011930
=> Loading section .init, size 0x48 lma ffffffff880119a0
=> Loading section .fini, size 0x30 lma ffffffff880119e8
=> Loading section .ctors, size 0x8 lma ffffffff88011a18
=> Loading section .dtors, size 0x8 lma ffffffff88011a20
=> Loading section .rdata, size 0x2460 lma ffffffff88011a30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e90
=> Loading section .data, size 0x448 lma ffffffff88013ea8
=> Start address ffffffff88000004
=> Transfer rate: 661312 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[184/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxchroot01.exe
Result: invalid
Time: 0:00:00.254559 psxchroot01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfb00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fb00
=> Loading section .init, size 0x48 lma ffffffff8800fb70
=> Loading section .fini, size 0x30 lma ffffffff8800fbb8
=> Loading section .ctors, size 0x8 lma ffffffff8800fbe8
=> Loading section .dtors, size 0x8 lma ffffffff8800fbf0
=> Loading section .rdata, size 0x1b5d lma ffffffff8800fc00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011760
=> Loading section .data, size 0x440 lma ffffffff88011778
=> Start address ffffffff88000004
=> Transfer rate: 580968 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[185/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxclassic01.exe
Result: invalid
Time: 0:00:00.265631 psxclassic01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x134a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880134a0
=> Loading section .init, size 0x48 lma ffffffff88013520
=> Loading section .fini, size 0x30 lma ffffffff88013568
=> Loading section .ctors, size 0x8 lma ffffffff88013598
=> Loading section .dtors, size 0x8 lma ffffffff880135a0
=> Loading section .rdata, size 0x1e5c lma ffffffff880135b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015410
=> Loading section .data, size 0x4a4 lma ffffffff88015428
=> Start address ffffffff88000004
=> Transfer rate: 706048 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[186/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxcleanup.exe
Result: invalid
Time: 0:00:00.255068 psxcleanup.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14420 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014420
=> Loading section .init, size 0x48 lma ffffffff88014490
=> Loading section .fini, size 0x30 lma ffffffff880144d8
=> Loading section .ctors, size 0x8 lma ffffffff88014508
=> Loading section .dtors, size 0x8 lma ffffffff88014510
=> Loading section .rdata, size 0x268c lma ffffffff88014520
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016bb0
=> Loading section .data, size 0x46c lma ffffffff88016bc8
=> Start address ffffffff88000004
=> Transfer rate: 753984 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[187/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid
Time: 0:00:00.262857 psxcleanup01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11150 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011150
=> Loading section .init, size 0x48 lma ffffffff880111c0
=> Loading section .fini, size 0x30 lma ffffffff88011208
=> Loading section .ctors, size 0x8 lma ffffffff88011238
=> Loading section .dtors, size 0x8 lma ffffffff88011240
=> Loading section .rdata, size 0x1b25 lma ffffffff88011250
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d78
=> Loading section .data, size 0x4b0 lma ffffffff88012d90
=> Start address ffffffff88000004
=> Transfer rate: 627112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[188/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid
Time: 0:00:00.268794 psxcleanup02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10730 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010730
=> Loading section .init, size 0x48 lma ffffffff880107a0
=> Loading section .fini, size 0x30 lma ffffffff880107e8
=> Loading section .ctors, size 0x8 lma ffffffff88010818
=> Loading section .dtors, size 0x8 lma ffffffff88010820
=> Loading section .rdata, size 0x1ac1 lma ffffffff88010830
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122f8
=> Loading section .data, size 0x4a8 lma ffffffff88012310
=> Start address ffffffff88000004
=> Transfer rate: 605512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[189/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxclock.exe
Result: invalid
Time: 0:00:00.254230 psxclock.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19af0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019af0
=> Loading section .init, size 0x48 lma ffffffff88019b60
=> Loading section .fini, size 0x30 lma ffffffff88019ba8
=> Loading section .ctors, size 0x8 lma ffffffff88019bd8
=> Loading section .dtors, size 0x8 lma ffffffff88019be0
=> Loading section .rdata, size 0x2968 lma ffffffff88019bf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c558
=> Loading section .data, size 0x618 lma ffffffff8801c570
=> Start address ffffffff88000004
=> Transfer rate: 941056 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[190/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxclock01.exe
Result: invalid
Time: 0:00:00.252656 psxclock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a20
=> Loading section .init, size 0x48 lma ffffffff88010a90
=> Loading section .fini, size 0x30 lma ffffffff88010ad8
=> Loading section .ctors, size 0x8 lma ffffffff88010b08
=> Loading section .dtors, size 0x8 lma ffffffff88010b10
=> Loading section .rdata, size 0x1a05 lma ffffffff88010b20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012528
=> Loading section .data, size 0x418 lma ffffffff88012540
=> Start address ffffffff88000004
=> Transfer rate: 608872 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[191/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:183 W:0 | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid
Time: 0:00:00.252967 psxclockrealtime01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16a50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016a50
=> Loading section .init, size 0x48 lma ffffffff88016ac0
=> Loading section .fini, size 0x30 lma ffffffff88016b08
=> Loading section .ctors, size 0x8 lma ffffffff88016b38
=> Loading section .dtors, size 0x8 lma ffffffff88016b40
=> Loading section .rdata, size 0x26a8 lma ffffffff88016b50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880191f8
=> Loading section .data, size 0x480 lma ffffffff88019210
=> Start address ffffffff88000004
=> Transfer rate: 832576 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[192/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid
Time: 0:00:00.255571 psxconcurrency01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfca0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fca0
=> Loading section .init, size 0x48 lma ffffffff8800fd10
=> Loading section .fini, size 0x30 lma ffffffff8800fd58
=> Loading section .ctors, size 0x8 lma ffffffff8800fd88
=> Loading section .dtors, size 0x8 lma ffffffff8800fd90
=> Loading section .rdata, size 0x1ad9 lma ffffffff8800fda0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011880
=> Loading section .data, size 0x408 lma ffffffff88011898
=> Start address ffffffff88000004
=> Transfer rate: 582792 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[193/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxcond01.exe
Result: invalid
Time: 0:00:00.257342 psxcond01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13090 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013090
=> Loading section .init, size 0x48 lma ffffffff88013100
=> Loading section .fini, size 0x30 lma ffffffff88013148
=> Loading section .ctors, size 0x8 lma ffffffff88013178
=> Loading section .dtors, size 0x8 lma ffffffff88013180
=> Loading section .rdata, size 0x2708 lma ffffffff88013190
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015898
=> Loading section .data, size 0x424 lma ffffffff880158b0
=> Start address ffffffff88000004
=> Transfer rate: 714336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[194/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxcond02.exe
Result: invalid
Time: 0:00:00.259142 psxcond02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106b0
=> Loading section .init, size 0x48 lma ffffffff88010720
=> Loading section .fini, size 0x30 lma ffffffff88010768
=> Loading section .ctors, size 0x8 lma ffffffff88010798
=> Loading section .dtors, size 0x8 lma ffffffff880107a0
=> Loading section .rdata, size 0x2650 lma ffffffff880107b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e00
=> Loading section .data, size 0x408 lma ffffffff88012e18
=> Start address ffffffff88000004
=> Transfer rate: 626880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[195/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxconfig01.exe
Result: invalid
Time: 0:00:00.252928 psxconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x153d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb0 lma ffffffff880153d0
=> Loading section .init, size 0x48 lma ffffffff88015480
=> Loading section .fini, size 0x30 lma ffffffff880154c8
=> Loading section .ctors, size 0x8 lma ffffffff880154f8
=> Loading section .dtors, size 0x8 lma ffffffff88015500
=> Loading section .rdata, size 0x2761 lma ffffffff88015510
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017c78
=> Loading section .data, size 0x700 lma ffffffff88017c90
=> Start address ffffffff88000004
=> Transfer rate: 793608 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[196/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxconfstr.exe
Result: invalid
Time: 0:00:00.257396 psxconfstr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x189f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880189f0
=> Loading section .init, size 0x48 lma ffffffff88018a70
=> Loading section .fini, size 0x30 lma ffffffff88018ab8
=> Loading section .ctors, size 0x8 lma ffffffff88018ae8
=> Loading section .dtors, size 0x8 lma ffffffff88018af0
=> Loading section .rdata, size 0x2404 lma ffffffff88018b00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801af08
=> Loading section .data, size 0x448 lma ffffffff8801af20
=> Start address ffffffff88000004
=> Transfer rate: 891616 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[197/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid
Time: 0:00:00.254412 psxdevctl01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x137e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880137e0
=> Loading section .init, size 0x48 lma ffffffff88013850
=> Loading section .fini, size 0x30 lma ffffffff88013898
=> Loading section .ctors, size 0x8 lma ffffffff880138c8
=> Loading section .dtors, size 0x8 lma ffffffff880138d0
=> Loading section .rdata, size 0x1dc0 lma ffffffff880138e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880156a0
=> Loading section .data, size 0x408 lma ffffffff880156b8
=> Start address ffffffff88000004
=> Transfer rate: 710080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[198/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid
Time: 0:00:00.257646 psxeintr_join.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012160
=> Loading section .init, size 0x48 lma ffffffff880121d0
=> Loading section .fini, size 0x30 lma ffffffff88012218
=> Loading section .ctors, size 0x8 lma ffffffff88012248
=> Loading section .dtors, size 0x8 lma ffffffff88012250
=> Loading section .rdata, size 0x1c8d lma ffffffff88012260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ef0
=> Loading section .data, size 0x418 lma ffffffff88013f08
=> Start address ffffffff88000004
=> Transfer rate: 661672 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[199/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:191 W:0 | mipstx39/jmr3904: psxenosys.exe
Result: invalid
Time: 0:00:00.253844 psxenosys.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x119b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880119b0
=> Loading section .init, size 0x48 lma ffffffff88011a20
=> Loading section .fini, size 0x30 lma ffffffff88011a68
=> Loading section .ctors, size 0x8 lma ffffffff88011a98
=> Loading section .dtors, size 0x8 lma ffffffff88011aa0
=> Loading section .rdata, size 0x2698 lma ffffffff88011ab0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014148
=> Loading section .data, size 0x41c lma ffffffff88014160
=> Start address ffffffff88000004
=> Transfer rate: 666528 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[200/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfatal01.exe
Result: invalid
Time: 0:00:00.253716 psxfatal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10da0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010da0
=> Loading section .init, size 0x48 lma ffffffff88010e10
=> Loading section .fini, size 0x30 lma ffffffff88010e58
=> Loading section .ctors, size 0x8 lma ffffffff88010e88
=> Loading section .dtors, size 0x8 lma ffffffff88010e90
=> Loading section .rdata, size 0x2760 lma ffffffff88010ea0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013600
=> Loading section .data, size 0x418 lma ffffffff88013618
=> Start address ffffffff88000004
=> Transfer rate: 643392 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[201/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfatal02.exe
Result: invalid
Time: 0:00:00.255846 psxfatal02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d00
=> Loading section .init, size 0x48 lma ffffffff88010d70
=> Loading section .fini, size 0x30 lma ffffffff88010db8
=> Loading section .ctors, size 0x8 lma ffffffff88010de8
=> Loading section .dtors, size 0x8 lma ffffffff88010df0
=> Loading section .rdata, size 0x2774 lma ffffffff88010e00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013578
=> Loading section .data, size 0x418 lma ffffffff88013590
=> Start address ffffffff88000004
=> Transfer rate: 642272 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[202/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfchx01.exe
Result: invalid
Time: 0:00:00.257501 psxfchx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ff0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ff0
=> Loading section .init, size 0x48 lma ffffffff88011060
=> Loading section .fini, size 0x30 lma ffffffff880110a8
=> Loading section .ctors, size 0x8 lma ffffffff880110d8
=> Loading section .dtors, size 0x8 lma ffffffff880110e0
=> Loading section .rdata, size 0x1f89 lma ffffffff880110f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013080
=> Loading section .data, size 0x418 lma ffffffff88013098
=> Start address ffffffff88000004
=> Transfer rate: 632072 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[203/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfenv01.exe
Result: invalid
Time: 0:00:00.257443 psxfenv01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012e00
=> Loading section .init, size 0x48 lma ffffffff88012e70
=> Loading section .fini, size 0x30 lma ffffffff88012eb8
=> Loading section .ctors, size 0x8 lma ffffffff88012ee8
=> Loading section .dtors, size 0x8 lma ffffffff88012ef0
=> Loading section .rdata, size 0x1cb4 lma ffffffff88012f00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014bb8
=> Loading section .data, size 0x408 lma ffffffff88014bd0
=> Start address ffffffff88000004
=> Transfer rate: 687712 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[204/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfile01.exe
Result: invalid
Time: 0:00:00.254998 psxfile01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x23d90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88023d90
=> Loading section .init, size 0x48 lma ffffffff88023e00
=> Loading section .fini, size 0x30 lma ffffffff88023e48
=> Loading section .ctors, size 0x8 lma ffffffff88023e78
=> Loading section .dtors, size 0x8 lma ffffffff88023e80
=> Loading section .rdata, size 0x4474 lma ffffffff88023e90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028308
=> Loading section .data, size 0x618 lma ffffffff88028320
=> Start address ffffffff88000004
=> Transfer rate: 1329504 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[205/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfile02.exe
Result: invalid
Time: 0:00:00.253102 psxfile02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011910
=> Loading section .init, size 0x48 lma ffffffff88011980
=> Loading section .fini, size 0x30 lma ffffffff880119c8
=> Loading section .ctors, size 0x8 lma ffffffff880119f8
=> Loading section .dtors, size 0x8 lma ffffffff88011a00
=> Loading section .rdata, size 0x24a8 lma ffffffff88011a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013eb8
=> Loading section .data, size 0x418 lma ffffffff88013ed0
=> Start address ffffffff88000004
=> Transfer rate: 661248 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[206/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid
Time: 0:00:00.254922 psxfilelock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11e00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011e00
=> Loading section .init, size 0x48 lma ffffffff88011e70
=> Loading section .fini, size 0x30 lma ffffffff88011eb8
=> Loading section .ctors, size 0x8 lma ffffffff88011ee8
=> Loading section .dtors, size 0x8 lma ffffffff88011ef0
=> Loading section .rdata, size 0x1a3d lma ffffffff88011f00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013940
=> Loading section .data, size 0x420 lma ffffffff88013958
=> Start address ffffffff88000004
=> Transfer rate: 650088 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[207/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:199 W:0 | mipstx39/jmr3904: psxftw01.exe
Result: invalid
Time: 0:00:00.252831 psxftw01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1b940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801b940
=> Loading section .init, size 0x48 lma ffffffff8801b9c0
=> Loading section .fini, size 0x30 lma ffffffff8801ba08
=> Loading section .ctors, size 0x8 lma ffffffff8801ba38
=> Loading section .dtors, size 0x8 lma ffffffff8801ba40
=> Loading section .rdata, size 0x430c lma ffffffff8801ba50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801fd60
=> Loading section .data, size 0x4b8 lma ffffffff8801fd80
=> Start address ffffffff88000004
=> Transfer rate: 1052960 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[208/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid
Time: 0:00:00.255731 psxgetattrnp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11e20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011e20
=> Loading section .init, size 0x48 lma ffffffff88011e90
=> Loading section .fini, size 0x30 lma ffffffff88011ed8
=> Loading section .ctors, size 0x8 lma ffffffff88011f08
=> Loading section .dtors, size 0x8 lma ffffffff88011f10
=> Loading section .rdata, size 0x1f5d lma ffffffff88011f20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e80
=> Loading section .data, size 0x418 lma ffffffff88013e98
=> Start address ffffffff88000004
=> Transfer rate: 660776 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[209/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid
Time: 0:00:00.262266 psxgetrusage01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10110 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010110
=> Loading section .init, size 0x48 lma ffffffff88010180
=> Loading section .fini, size 0x30 lma ffffffff880101c8
=> Loading section .ctors, size 0x8 lma ffffffff880101f8
=> Loading section .dtors, size 0x8 lma ffffffff88010200
=> Loading section .rdata, size 0x1b7d lma ffffffff88010210
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d90
=> Loading section .data, size 0x418 lma ffffffff88011da8
=> Start address ffffffff88000004
=> Transfer rate: 593320 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[210/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid
Time: 0:00:00.261823 psxglobalcon01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfbf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fbf0
=> Loading section .init, size 0x48 lma ffffffff8800fc60
=> Loading section .fini, size 0x30 lma ffffffff8800fca8
=> Loading section .ctors, size 0xc lma ffffffff8800fcd8
=> Loading section .dtors, size 0x8 lma ffffffff8800fce4
=> Loading section .rdata, size 0x1a35 lma ffffffff8800fcf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011728
=> Loading section .data, size 0x408 lma ffffffff88011740
=> Start address ffffffff88000004
=> Transfer rate: 580104 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[211/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid
Time: 0:00:00.253210 psxglobalcon02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100f0
=> Loading section .init, size 0x48 lma ffffffff88010160
=> Loading section .fini, size 0x30 lma ffffffff880101a8
=> Loading section .ctors, size 0xc lma ffffffff880101d8
=> Loading section .dtors, size 0x8 lma ffffffff880101e4
=> Loading section .rdata, size 0x1a5d lma ffffffff880101f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c50
=> Loading section .data, size 0x478 lma ffffffff88011c68
=> Start address ffffffff88000004
=> Transfer rate: 591560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[212/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psxid01.exe
Result: invalid
Time: 0:00:00.259041 psxid01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013520
=> Loading section .init, size 0x48 lma ffffffff88013590
=> Loading section .fini, size 0x30 lma ffffffff880135d8
=> Loading section .ctors, size 0x8 lma ffffffff88013608
=> Loading section .dtors, size 0x8 lma ffffffff88013610
=> Loading section .rdata, size 0x1d3c lma ffffffff88013620
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015360
=> Loading section .data, size 0x448 lma ffffffff88015378
=> Start address ffffffff88000004
=> Transfer rate: 703904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[213/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psximfs01.exe
Result: invalid
Time: 0:00:00.254869 psximfs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10eb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010eb0
=> Loading section .init, size 0x48 lma ffffffff88010f20
=> Loading section .fini, size 0x30 lma ffffffff88010f68
=> Loading section .ctors, size 0x8 lma ffffffff88010f98
=> Loading section .dtors, size 0x8 lma ffffffff88010fa0
=> Loading section .rdata, size 0x250c lma ffffffff88010fb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134c0
=> Loading section .data, size 0x418 lma ffffffff880134d8
=> Start address ffffffff88000004
=> Transfer rate: 640800 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[214/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psximfs02.exe
Result: invalid
Time: 0:00:00.253256 psximfs02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019130
=> Loading section .init, size 0x48 lma ffffffff880191a0
=> Loading section .fini, size 0x30 lma ffffffff880191e8
=> Loading section .ctors, size 0x8 lma ffffffff88019218
=> Loading section .dtors, size 0x8 lma ffffffff88019220
=> Loading section .rdata, size 0x2888 lma ffffffff88019230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bab8
=> Loading section .data, size 0x5ac lma ffffffff8801bad0
=> Start address ffffffff88000004
=> Transfer rate: 918432 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[215/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:207 W:0 | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid
Time: 0:00:00.252221 psxinttypes01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x144d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880144d0
=> Loading section .init, size 0x48 lma ffffffff88014540
=> Loading section .fini, size 0x30 lma ffffffff88014588
=> Loading section .ctors, size 0x8 lma ffffffff880145b8
=> Loading section .dtors, size 0x8 lma ffffffff880145c0
=> Loading section .rdata, size 0x2134 lma ffffffff880145d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016708
=> Loading section .data, size 0x570 lma ffffffff88016720
=> Start address ffffffff88000004
=> Transfer rate: 746528 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[216/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxitimer.exe
Result: invalid
Time: 0:00:00.258114 psxitimer.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c60
=> Loading section .init, size 0x48 lma ffffffff88010cd0
=> Loading section .fini, size 0x30 lma ffffffff88010d18
=> Loading section .ctors, size 0x8 lma ffffffff88010d48
=> Loading section .dtors, size 0x8 lma ffffffff88010d50
=> Loading section .rdata, size 0x1c05 lma ffffffff88010d60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012968
=> Loading section .data, size 0x418 lma ffffffff88012980
=> Start address ffffffff88000004
=> Transfer rate: 617576 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[217/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey01.exe
Result: invalid
Time: 0:00:00.255331 psxkey01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf5f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f5f0
=> Loading section .init, size 0x48 lma ffffffff8800f660
=> Loading section .fini, size 0x30 lma ffffffff8800f6a8
=> Loading section .ctors, size 0x8 lma ffffffff8800f6d8
=> Loading section .dtors, size 0x8 lma ffffffff8800f6e0
=> Loading section .rdata, size 0x1ce9 lma ffffffff8800f6f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113e0
=> Loading section .data, size 0x470 lma ffffffff880113f8
=> Start address ffffffff88000004
=> Transfer rate: 574152 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[218/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey02.exe
Result: invalid
Time: 0:00:00.257259 psxkey02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10200 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010200
=> Loading section .init, size 0x48 lma ffffffff88010270
=> Loading section .fini, size 0x30 lma ffffffff880102b8
=> Loading section .ctors, size 0x8 lma ffffffff880102e8
=> Loading section .dtors, size 0x8 lma ffffffff880102f0
=> Loading section .rdata, size 0x1b01 lma ffffffff88010300
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e08
=> Loading section .data, size 0x470 lma ffffffff88011e20
=> Start address ffffffff88000004
=> Transfer rate: 594952 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[219/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey03.exe
Result: invalid
Time: 0:00:00.265381 psxkey03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011210
=> Loading section .init, size 0x48 lma ffffffff88011280
=> Loading section .fini, size 0x30 lma ffffffff880112c8
=> Loading section .ctors, size 0x8 lma ffffffff880112f8
=> Loading section .dtors, size 0x8 lma ffffffff88011300
=> Loading section .rdata, size 0x1b89 lma ffffffff88011310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ea0
=> Loading section .data, size 0x490 lma ffffffff88012eb8
=> Start address ffffffff88000004
=> Transfer rate: 629192 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[220/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey04.exe
Result: invalid
Time: 0:00:00.260376 psxkey04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x112c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880112c0
=> Loading section .init, size 0x48 lma ffffffff88011330
=> Loading section .fini, size 0x30 lma ffffffff88011378
=> Loading section .ctors, size 0x8 lma ffffffff880113a8
=> Loading section .dtors, size 0x8 lma ffffffff880113b0
=> Loading section .rdata, size 0x1b89 lma ffffffff880113c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f50
=> Loading section .data, size 0x498 lma ffffffff88012f68
=> Start address ffffffff88000004
=> Transfer rate: 630664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[221/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey05.exe
Result: invalid
Time: 0:00:00.252152 psxkey05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfab0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fab0
=> Loading section .init, size 0x48 lma ffffffff8800fb20
=> Loading section .fini, size 0x30 lma ffffffff8800fb68
=> Loading section .ctors, size 0x8 lma ffffffff8800fb98
=> Loading section .dtors, size 0x8 lma ffffffff8800fba0
=> Loading section .rdata, size 0x1b0d lma ffffffff8800fbb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116c0
=> Loading section .data, size 0x470 lma ffffffff880116d8
=> Start address ffffffff88000004
=> Transfer rate: 580072 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[222/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey06.exe
Result: invalid
Time: 0:00:00.252853 psxkey06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11eb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011eb0
=> Loading section .init, size 0x48 lma ffffffff88011f20
=> Loading section .fini, size 0x30 lma ffffffff88011f68
=> Loading section .ctors, size 0x8 lma ffffffff88011f98
=> Loading section .dtors, size 0x8 lma ffffffff88011fa0
=> Loading section .rdata, size 0x1e39 lma ffffffff88011fb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013df0
=> Loading section .data, size 0x4a0 lma ffffffff88013e08
=> Start address ffffffff88000004
=> Transfer rate: 660680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[223/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:215 W:0 | mipstx39/jmr3904: psxkey07.exe
Result: invalid
Time: 0:00:00.254915 psxkey07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13290 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013290
=> Loading section .init, size 0x48 lma ffffffff88013300
=> Loading section .fini, size 0x30 lma ffffffff88013348
=> Loading section .ctors, size 0x8 lma ffffffff88013378
=> Loading section .dtors, size 0x8 lma ffffffff88013380
=> Loading section .rdata, size 0x1d24 lma ffffffff88013390
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150b8
=> Loading section .data, size 0x490 lma ffffffff880150d0
=> Start address ffffffff88000004
=> Transfer rate: 699040 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[224/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxkey08.exe
Result: invalid
Time: 0:00:00.267296 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b50
=> Loading section .init, size 0x48 lma ffffffff88011bc0
=> Loading section .fini, size 0x30 lma ffffffff88011c08
=> Loading section .ctors, size 0x8 lma ffffffff88011c38
=> Loading section .dtors, size 0x8 lma ffffffff88011c40
=> Loading section .rdata, size 0x1ccd lma ffffffff88011c50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013920
=> Loading section .data, size 0x4a0 lma ffffffff88013938
=> Start address ffffffff88000004
=> Transfer rate: 650856 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[225/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxkey09.exe
Result: invalid
Time: 0:00:00.257489 psxkey09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=> Loading section .init, size 0x48 lma ffffffff88011160
=> Loading section .fini, size 0x30 lma ffffffff880111a8
=> Loading section .ctors, size 0x8 lma ffffffff880111d8
=> Loading section .dtors, size 0x8 lma ffffffff880111e0
=> Loading section .rdata, size 0x1b31 lma ffffffff880111f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d28
=> Loading section .data, size 0x490 lma ffffffff88012d40
=> Start address ffffffff88000004
=> Transfer rate: 626184 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[226/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxkey10.exe
Result: invalid
Time: 0:00:00.254920 psxkey10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=> Loading section .init, size 0x48 lma ffffffff88011160
=> Loading section .fini, size 0x30 lma ffffffff880111a8
=> Loading section .ctors, size 0x8 lma ffffffff880111d8
=> Loading section .dtors, size 0x8 lma ffffffff880111e0
=> Loading section .rdata, size 0x1b41 lma ffffffff880111f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d38
=> Loading section .data, size 0x490 lma ffffffff88012d50
=> Start address ffffffff88000004
=> Transfer rate: 626312 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[227/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxmmap01.exe
Result: invalid
Time: 0:00:00.267539 psxmmap01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a810 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801a810
=> Loading section .init, size 0x48 lma ffffffff8801a890
=> Loading section .fini, size 0x30 lma ffffffff8801a8d8
=> Loading section .ctors, size 0x8 lma ffffffff8801a908
=> Loading section .dtors, size 0x8 lma ffffffff8801a910
=> Loading section .rdata, size 0x25e0 lma ffffffff8801a920
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cf00
=> Loading section .data, size 0x5fc lma ffffffff8801cf18
=> Start address ffffffff88000004
=> Transfer rate: 960608 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[228/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxmount.exe
Result: invalid
Time: 0:00:00.256251 psxmount.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12620 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012620
=> Loading section .init, size 0x48 lma ffffffff88012690
=> Loading section .fini, size 0x30 lma ffffffff880126d8
=> Loading section .ctors, size 0x8 lma ffffffff88012708
=> Loading section .dtors, size 0x8 lma ffffffff88012710
=> Loading section .rdata, size 0x2cb4 lma ffffffff88012720
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880153d8
=> Loading section .data, size 0x4e0 lma ffffffff880153f0
=> Start address ffffffff88000004
=> Transfer rate: 706080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[229/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid
Time: 0:00:00.253657 psxmsgq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26bd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88026bd0
=> Loading section .init, size 0x48 lma ffffffff88026c50
=> Loading section .fini, size 0x30 lma ffffffff88026c98
=> Loading section .ctors, size 0x8 lma ffffffff88026cc8
=> Loading section .dtors, size 0x8 lma ffffffff88026cd0
=> Loading section .rdata, size 0x477c lma ffffffff88026ce0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b460
=> Loading section .data, size 0x860 lma ffffffff8802b478
=> Start address ffffffff88000004
=> Transfer rate: 1435232 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[230/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid
Time: 0:00:00.253667 psxmsgq02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x172c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880172c0
=> Loading section .init, size 0x48 lma ffffffff88017330
=> Loading section .fini, size 0x30 lma ffffffff88017378
=> Loading section .ctors, size 0x8 lma ffffffff880173a8
=> Loading section .dtors, size 0x8 lma ffffffff880173b0
=> Loading section .rdata, size 0x2b70 lma ffffffff880173c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019f30
=> Loading section .data, size 0x640 lma ffffffff88019f48
=> Start address ffffffff88000004
=> Transfer rate: 863232 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[231/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:223 W:0 | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid
Time: 0:00:00.256071 psxmsgq03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13f70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013f70
=> Loading section .init, size 0x48 lma ffffffff88013ff0
=> Loading section .fini, size 0x30 lma ffffffff88014038
=> Loading section .ctors, size 0x8 lma ffffffff88014068
=> Loading section .dtors, size 0x8 lma ffffffff88014070
=> Loading section .rdata, size 0x292c lma ffffffff88014080
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169b0
=> Loading section .data, size 0x494 lma ffffffff880169c8
=> Start address ffffffff88000004
=> Transfer rate: 750208 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[232/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid
Time: 0:00:00.264893 psxmsgq04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13100 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013100
=> Loading section .init, size 0x48 lma ffffffff88013170
=> Loading section .fini, size 0x30 lma ffffffff880131b8
=> Loading section .ctors, size 0x8 lma ffffffff880131e8
=> Loading section .dtors, size 0x8 lma ffffffff880131f0
=> Loading section .rdata, size 0x2598 lma ffffffff88013200
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015798
=> Loading section .data, size 0x458 lma ffffffff880157b0
=> Start address ffffffff88000004
=> Transfer rate: 712704 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[233/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid
Time: 0:00:00.252462 psxmutexattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff60
=> Loading section .init, size 0x48 lma ffffffff8800ffd0
=> Loading section .fini, size 0x30 lma ffffffff88010018
=> Loading section .ctors, size 0x8 lma ffffffff88010048
=> Loading section .dtors, size 0x8 lma ffffffff88010050
=> Loading section .rdata, size 0x1cf1 lma ffffffff88010060
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d58
=> Loading section .data, size 0x440 lma ffffffff88011d70
=> Start address ffffffff88000004
=> Transfer rate: 593160 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[234/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxndbm01.exe
Result: invalid
Time: 0:00:00.255874 psxndbm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019190
=> Loading section .init, size 0x48 lma ffffffff88019200
=> Loading section .fini, size 0x30 lma ffffffff88019248
=> Loading section .ctors, size 0x8 lma ffffffff88019278
=> Loading section .dtors, size 0x8 lma ffffffff88019280
=> Loading section .rdata, size 0x2488 lma ffffffff88019290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b718
=> Loading section .data, size 0x418 lma ffffffff8801b730
=> Start address ffffffff88000004
=> Transfer rate: 907776 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[235/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxobj01.exe
Result: invalid
Time: 0:00:00.254400 psxobj01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf7a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f7a0
=> Loading section .init, size 0x48 lma ffffffff8800f810
=> Loading section .fini, size 0x30 lma ffffffff8800f858
=> Loading section .ctors, size 0x8 lma ffffffff8800f888
=> Loading section .dtors, size 0x8 lma ffffffff8800f890
=> Loading section .rdata, size 0x1b55 lma ffffffff8800f8a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113f8
=> Loading section .data, size 0x438 lma ffffffff88011410
=> Start address ffffffff88000004
=> Transfer rate: 573928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[236/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxonce01.exe
Result: invalid
Time: 0:00:00.251681 psxonce01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd80
=> Loading section .init, size 0x48 lma ffffffff8800fdf0
=> Loading section .fini, size 0x30 lma ffffffff8800fe38
=> Loading section .ctors, size 0x8 lma ffffffff8800fe68
=> Loading section .dtors, size 0x8 lma ffffffff8800fe70
=> Loading section .rdata, size 0x1b95 lma ffffffff8800fe80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a18
=> Loading section .data, size 0x430 lma ffffffff88011a30
=> Start address ffffffff88000004
=> Transfer rate: 586408 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[237/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid
Time: 0:00:00.252350 psxpasswd01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13c90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013c90
=> Loading section .init, size 0x48 lma ffffffff88013d00
=> Loading section .fini, size 0x30 lma ffffffff88013d48
=> Loading section .ctors, size 0x8 lma ffffffff88013d78
=> Loading section .dtors, size 0x8 lma ffffffff88013d80
=> Loading section .rdata, size 0x1f98 lma ffffffff88013d90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015d28
=> Loading section .data, size 0x4b8 lma ffffffff88015d40
=> Start address ffffffff88000004
=> Transfer rate: 724864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[238/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid
Time: 0:00:00.253468 psxpasswd02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1dd70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801dd70
=> Loading section .init, size 0x48 lma ffffffff8801dde0
=> Loading section .fini, size 0x30 lma ffffffff8801de28
=> Loading section .ctors, size 0x8 lma ffffffff8801de58
=> Loading section .dtors, size 0x8 lma ffffffff8801de60
=> Loading section .rdata, size 0x2770 lma ffffffff8801de70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880205e0
=> Loading section .data, size 0x624 lma ffffffff880205f8
=> Start address ffffffff88000004
=> Transfer rate: 1073312 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[239/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:231 W:0 | mipstx39/jmr3904: psxpipe01.exe
Result: invalid
Time: 0:00:00.252417 psxpipe01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x186c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880186c0
=> Loading section .init, size 0x48 lma ffffffff88018730
=> Loading section .fini, size 0x30 lma ffffffff88018778
=> Loading section .ctors, size 0x8 lma ffffffff880187a8
=> Loading section .dtors, size 0x8 lma ffffffff880187b0
=> Loading section .rdata, size 0x2338 lma ffffffff880187c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aaf8
=> Loading section .data, size 0x5ac lma ffffffff8801ab10
=> Start address ffffffff88000004
=> Transfer rate: 886176 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[240/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid
Time: 0:00:00.263338 psxrdwrv.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13540 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013540
=> Loading section .init, size 0x48 lma ffffffff880135b0
=> Loading section .fini, size 0x30 lma ffffffff880135f8
=> Loading section .ctors, size 0x8 lma ffffffff88013628
=> Loading section .dtors, size 0x8 lma ffffffff88013630
=> Loading section .rdata, size 0x2874 lma ffffffff88013640
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015eb8
=> Loading section .data, size 0x420 lma ffffffff88015ed0
=> Start address ffffffff88000004
=> Transfer rate: 726816 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[241/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxreaddir.exe
Result: invalid
Time: 0:00:00.255255 psxreaddir.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12280 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012280
=> Loading section .init, size 0x48 lma ffffffff880122f0
=> Loading section .fini, size 0x30 lma ffffffff88012338
=> Loading section .ctors, size 0x8 lma ffffffff88012368
=> Loading section .dtors, size 0x8 lma ffffffff88012370
=> Loading section .rdata, size 0x2569 lma ffffffff88012380
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880148f0
=> Loading section .data, size 0x4ec lma ffffffff88014908
=> Start address ffffffff88000004
=> Transfer rate: 683816 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[242/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid
Time: 0:00:00.256981 psxrwlock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14a50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014a50
=> Loading section .init, size 0x48 lma ffffffff88014ac0
=> Loading section .fini, size 0x30 lma ffffffff88014b08
=> Loading section .ctors, size 0x8 lma ffffffff88014b38
=> Loading section .dtors, size 0x8 lma ffffffff88014b40
=> Loading section .rdata, size 0x3028 lma ffffffff88014b50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b78
=> Loading section .data, size 0x494 lma ffffffff88017b90
=> Start address ffffffff88000004
=> Transfer rate: 786656 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[243/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxsem01.exe
Result: invalid
Time: 0:00:00.253880 psxsem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ca90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801ca90
=> Loading section .init, size 0x48 lma ffffffff8801cb00
=> Loading section .fini, size 0x30 lma ffffffff8801cb48
=> Loading section .ctors, size 0x8 lma ffffffff8801cb78
=> Loading section .dtors, size 0x8 lma ffffffff8801cb80
=> Loading section .rdata, size 0x3568 lma ffffffff8801cb90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880200f8
=> Loading section .data, size 0x5b4 lma ffffffff88020110
=> Start address ffffffff88000004
=> Transfer rate: 1062368 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[244/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxshm01.exe
Result: invalid
Time: 0:00:00.257210 psxshm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012650
=> Loading section .init, size 0x48 lma ffffffff880126c0
=> Loading section .fini, size 0x30 lma ffffffff88012708
=> Loading section .ctors, size 0x8 lma ffffffff88012738
=> Loading section .dtors, size 0x8 lma ffffffff88012740
=> Loading section .rdata, size 0x2474 lma ffffffff88012750
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014bc8
=> Loading section .data, size 0x450 lma ffffffff88014be0
=> Start address ffffffff88000004
=> Transfer rate: 688416 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[245/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxshm02.exe
Result: invalid
Time: 0:00:00.251920 psxshm02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12930 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012930
=> Loading section .init, size 0x48 lma ffffffff880129a0
=> Loading section .fini, size 0x30 lma ffffffff880129e8
=> Loading section .ctors, size 0x8 lma ffffffff88012a18
=> Loading section .dtors, size 0x8 lma ffffffff88012a20
=> Loading section .rdata, size 0x2474 lma ffffffff88012a30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ea8
=> Loading section .data, size 0x450 lma ffffffff88014ec0
=> Start address ffffffff88000004
=> Transfer rate: 694304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[246/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxsignal01.exe
Result: invalid
Time: 0:00:00.253181 psxsignal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x186b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880186b0
=> Loading section .init, size 0x48 lma ffffffff88018730
=> Loading section .fini, size 0x30 lma ffffffff88018778
=> Loading section .ctors, size 0x8 lma ffffffff880187a8
=> Loading section .dtors, size 0x8 lma ffffffff880187b0
=> Loading section .rdata, size 0x2500 lma ffffffff880187c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801acc0
=> Loading section .data, size 0x654 lma ffffffff8801acd8
=> Start address ffffffff88000004
=> Transfer rate: 891168 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[247/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:239 W:0 | mipstx39/jmr3904: psxsignal02.exe
Result: invalid
Time: 0:00:00.252151 psxsignal02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012e90
=> Loading section .init, size 0x48 lma ffffffff88012f00
=> Loading section .fini, size 0x30 lma ffffffff88012f48
=> Loading section .ctors, size 0x8 lma ffffffff88012f78
=> Loading section .dtors, size 0x8 lma ffffffff88012f80
=> Loading section .rdata, size 0x1ce5 lma ffffffff88012f90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c78
=> Loading section .data, size 0x4a8 lma ffffffff88014c90
=> Start address ffffffff88000004
=> Transfer rate: 690536 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[248/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxsignal03.exe
Result: invalid
Time: 0:00:00.253909 psxsignal03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12dd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012dd0
=> Loading section .init, size 0x48 lma ffffffff88012e40
=> Loading section .fini, size 0x30 lma ffffffff88012e88
=> Loading section .ctors, size 0x8 lma ffffffff88012eb8
=> Loading section .dtors, size 0x8 lma ffffffff88012ec0
=> Loading section .rdata, size 0x1e65 lma ffffffff88012ed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d38
=> Loading section .data, size 0x430 lma ffffffff88014d50
=> Start address ffffffff88000004
=> Transfer rate: 691112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[249/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxsignal04.exe
Result: invalid
Time: 0:00:00.256368 psxsignal04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12dd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012dd0
=> Loading section .init, size 0x48 lma ffffffff88012e40
=> Loading section .fini, size 0x30 lma ffffffff88012e88
=> Loading section .ctors, size 0x8 lma ffffffff88012eb8
=> Loading section .dtors, size 0x8 lma ffffffff88012ec0
=> Loading section .rdata, size 0x1e7d lma ffffffff88012ed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d50
=> Loading section .data, size 0x430 lma ffffffff88014d68
=> Start address ffffffff88000004
=> Transfer rate: 691304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[250/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxsignal05.exe
Result: invalid
Time: 0:00:00.253408 psxsignal05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f10
=> Loading section .init, size 0x48 lma ffffffff88010f80
=> Loading section .fini, size 0x30 lma ffffffff88010fc8
=> Loading section .ctors, size 0x8 lma ffffffff88010ff8
=> Loading section .dtors, size 0x8 lma ffffffff88011000
=> Loading section .rdata, size 0x1c39 lma ffffffff88011010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c50
=> Loading section .data, size 0x418 lma ffffffff88012c68
=> Start address ffffffff88000004
=> Transfer rate: 623496 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[251/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxsignal06.exe
Result: invalid
Time: 0:00:00.253680 psxsignal06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13240 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013240
=> Loading section .init, size 0x48 lma ffffffff880132b0
=> Loading section .fini, size 0x30 lma ffffffff880132f8
=> Loading section .ctors, size 0x8 lma ffffffff88013328
=> Loading section .dtors, size 0x8 lma ffffffff88013330
=> Loading section .rdata, size 0x1d28 lma ffffffff88013340
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015068
=> Loading section .data, size 0x424 lma ffffffff88015080
=> Start address ffffffff88000004
=> Transfer rate: 697568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[252/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxsignal07.exe
Result: invalid
Time: 0:00:00.254380 psxsignal07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15df0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015df0
=> Loading section .init, size 0x48 lma ffffffff88015e70
=> Loading section .fini, size 0x30 lma ffffffff88015eb8
=> Loading section .ctors, size 0x8 lma ffffffff88015ee8
=> Loading section .dtors, size 0x8 lma ffffffff88015ef0
=> Loading section .rdata, size 0x1e80 lma ffffffff88015f00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017d80
=> Loading section .data, size 0x49c lma ffffffff88017d98
=> Start address ffffffff88000004
=> Transfer rate: 790880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[253/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxsignal08.exe
Result: invalid
Time: 0:00:00.253226 psxsignal08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15530 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015530
=> Loading section .init, size 0x48 lma ffffffff880155a0
=> Loading section .fini, size 0x30 lma ffffffff880155e8
=> Loading section .ctors, size 0x8 lma ffffffff88015618
=> Loading section .dtors, size 0x8 lma ffffffff88015620
=> Loading section .rdata, size 0x21f8 lma ffffffff88015630
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017828
=> Loading section .data, size 0x424 lma ffffffff88017840
=> Start address ffffffff88000004
=> Transfer rate: 778976 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[254/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxspin01.exe
Result: invalid
Time: 0:00:00.254173 psxspin01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10320 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010320
=> Loading section .init, size 0x48 lma ffffffff88010390
=> Loading section .fini, size 0x30 lma ffffffff880103d8
=> Loading section .ctors, size 0x8 lma ffffffff88010408
=> Loading section .dtors, size 0x8 lma ffffffff88010410
=> Loading section .rdata, size 0x1c15 lma ffffffff88010420
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012038
=> Loading section .data, size 0x418 lma ffffffff88012050
=> Start address ffffffff88000004
=> Transfer rate: 598760 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[255/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:247 W:0 | mipstx39/jmr3904: psxstack01.exe
Result: invalid
Time: 0:00:00.254357 psxstack01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11450 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011450
=> Loading section .init, size 0x48 lma ffffffff880114c0
=> Loading section .fini, size 0x30 lma ffffffff88011508
=> Loading section .ctors, size 0x8 lma ffffffff88011538
=> Loading section .dtors, size 0x8 lma ffffffff88011540
=> Loading section .rdata, size 0x1b51 lma ffffffff88011550
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130a8
=> Loading section .data, size 0x428 lma ffffffff880130c0
=> Start address ffffffff88000004
=> Transfer rate: 632520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[256/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxstack02.exe
Result: invalid
Time: 0:00:00.257657 psxstack02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11420 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011420
=> Loading section .init, size 0x48 lma ffffffff88011490
=> Loading section .fini, size 0x30 lma ffffffff880114d8
=> Loading section .ctors, size 0x8 lma ffffffff88011508
=> Loading section .dtors, size 0x8 lma ffffffff88011510
=> Loading section .rdata, size 0x1b51 lma ffffffff88011520
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013078
=> Loading section .data, size 0x428 lma ffffffff88013090
=> Start address ffffffff88000004
=> Transfer rate: 632136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[257/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxstat.exe
Result: invalid
Time: 0:00:00.256464 psxstat.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20820 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88020820
=> Loading section .init, size 0x48 lma ffffffff88020890
=> Loading section .fini, size 0x30 lma ffffffff880208d8
=> Loading section .ctors, size 0x8 lma ffffffff88020908
=> Loading section .dtors, size 0x8 lma ffffffff88020910
=> Loading section .rdata, size 0x41c4 lma ffffffff88020920
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024ae8
=> Loading section .data, size 0x778 lma ffffffff88024b00
=> Start address ffffffff88000004
=> Transfer rate: 1217376 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[258/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid
Time: 0:00:00.260853 psxstrsignal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012840
=> Loading section .init, size 0x48 lma ffffffff880128b0
=> Loading section .fini, size 0x30 lma ffffffff880128f8
=> Loading section .ctors, size 0x8 lma ffffffff88012928
=> Loading section .dtors, size 0x8 lma ffffffff88012930
=> Loading section .rdata, size 0x20a0 lma ffffffff88012940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880149e0
=> Loading section .data, size 0x674 lma ffffffff880149f8
=> Start address ffffffff88000004
=> Transfer rate: 688928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[259/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxsysconf.exe
Result: invalid
Time: 0:00:00.259191 psxsysconf.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010fa0
=> Loading section .init, size 0x48 lma ffffffff88011010
=> Loading section .fini, size 0x30 lma ffffffff88011058
=> Loading section .ctors, size 0x8 lma ffffffff88011088
=> Loading section .dtors, size 0x8 lma ffffffff88011090
=> Loading section .rdata, size 0x25dc lma ffffffff880110a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013680
=> Loading section .data, size 0x418 lma ffffffff88013698
=> Start address ffffffff88000004
=> Transfer rate: 644384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[260/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid
Time: 0:00:00.256447 psxthreadname01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100e0
=> Loading section .init, size 0x48 lma ffffffff88010150
=> Loading section .fini, size 0x30 lma ffffffff88010198
=> Loading section .ctors, size 0x8 lma ffffffff880101c8
=> Loading section .dtors, size 0x8 lma ffffffff880101d0
=> Loading section .rdata, size 0x1ad1 lma ffffffff880101e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cb8
=> Loading section .data, size 0x418 lma ffffffff88011cd0
=> Start address ffffffff88000004
=> Transfer rate: 591560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[261/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxtime.exe
Result: invalid
Time: 0:00:00.253208 psxtime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17d50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017d50
=> Loading section .init, size 0x48 lma ffffffff88017dc0
=> Loading section .fini, size 0x30 lma ffffffff88017e08
=> Loading section .ctors, size 0x8 lma ffffffff88017e38
=> Loading section .dtors, size 0x8 lma ffffffff88017e40
=> Loading section .rdata, size 0x252c lma ffffffff88017e50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a380
=> Loading section .data, size 0x6f8 lma ffffffff8801a398
=> Start address ffffffff88000004
=> Transfer rate: 873504 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[262/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxtimer01.exe
Result: invalid
Time: 0:00:00.252292 psxtimer01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22fe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88022fe0
=> Loading section .init, size 0x48 lma ffffffff88023060
=> Loading section .fini, size 0x30 lma ffffffff880230a8
=> Loading section .ctors, size 0x8 lma ffffffff880230d8
=> Loading section .dtors, size 0x8 lma ffffffff880230e0
=> Loading section .rdata, size 0x3590 lma ffffffff880230f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026680
=> Loading section .data, size 0x63c lma ffffffff88026698
=> Start address ffffffff88000004
=> Transfer rate: 1271392 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[263/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:255 W:0 | mipstx39/jmr3904: psxtimer02.exe
Result: invalid
Time: 0:00:00.252124 psxtimer02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13410 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013410
=> Loading section .init, size 0x48 lma ffffffff88013490
=> Loading section .fini, size 0x30 lma ffffffff880134d8
=> Loading section .ctors, size 0x8 lma ffffffff88013508
=> Loading section .dtors, size 0x8 lma ffffffff88013510
=> Loading section .rdata, size 0x2a1c lma ffffffff88013520
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015f40
=> Loading section .data, size 0x448 lma ffffffff88015f58
=> Start address ffffffff88000004
=> Transfer rate: 728224 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[264/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxtimer_face01.exe
Result: invalid
Time: 0:00:00.253945 psxtimer_face01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer_face01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer_face01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880120b0
=> Loading section .init, size 0x48 lma ffffffff88012130
=> Loading section .fini, size 0x30 lma ffffffff88012178
=> Loading section .ctors, size 0x8 lma ffffffff880121a8
=> Loading section .dtors, size 0x8 lma ffffffff880121b0
=> Loading section .rdata, size 0x271c lma ffffffff880121c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880148e0
=> Loading section .data, size 0x448 lma ffffffff880148f8
=> Start address ffffffff88000004
=> Transfer rate: 682400 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer_face01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[265/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxtimes01.exe
Result: invalid
Time: 0:00:00.258852 psxtimes01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100c0
=> Loading section .init, size 0x48 lma ffffffff88010130
=> Loading section .fini, size 0x30 lma ffffffff88010178
=> Loading section .ctors, size 0x8 lma ffffffff880101a8
=> Loading section .dtors, size 0x8 lma ffffffff880101b0
=> Loading section .rdata, size 0x1b31 lma ffffffff880101c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cf8
=> Loading section .data, size 0x418 lma ffffffff88011d10
=> Start address ffffffff88000004
=> Transfer rate: 592072 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[266/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxualarm.exe
Result: invalid
Time: 0:00:00.253843 psxualarm.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x183f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880183f0
=> Loading section .init, size 0x48 lma ffffffff88018460
=> Loading section .fini, size 0x30 lma ffffffff880184a8
=> Loading section .ctors, size 0x8 lma ffffffff880184d8
=> Loading section .dtors, size 0x8 lma ffffffff880184e0
=> Loading section .rdata, size 0x2368 lma ffffffff880184f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a858
=> Loading section .data, size 0x64c lma ffffffff8801a870
=> Start address ffffffff88000004
=> Transfer rate: 882080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[267/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxusleep.exe
Result: invalid
Time: 0:00:00.251563 psxusleep.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x183c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880183c0
=> Loading section .init, size 0x48 lma ffffffff88018430
=> Loading section .fini, size 0x30 lma ffffffff88018478
=> Loading section .ctors, size 0x8 lma ffffffff880184a8
=> Loading section .dtors, size 0x8 lma ffffffff880184b0
=> Loading section .rdata, size 0x229c lma ffffffff880184c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a760
=> Loading section .data, size 0x61c lma ffffffff8801a778
=> Start address ffffffff88000004
=> Transfer rate: 879680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[268/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid
Time: 0:00:00.252024 psxtmbarrier01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfdd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fdd0
=> Loading section .init, size 0x48 lma ffffffff8800fe40
=> Loading section .fini, size 0x30 lma ffffffff8800fe88
=> Loading section .ctors, size 0x8 lma ffffffff8800feb8
=> Loading section .dtors, size 0x8 lma ffffffff8800fec0
=> Loading section .rdata, size 0x1a5d lma ffffffff8800fed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011930
=> Loading section .data, size 0x408 lma ffffffff88011948
=> Start address ffffffff88000004
=> Transfer rate: 584232 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[269/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid
Time: 0:00:00.252820 psxtmbarrier02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10080 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010080
=> Loading section .init, size 0x48 lma ffffffff880100f0
=> Loading section .fini, size 0x30 lma ffffffff88010138
=> Loading section .ctors, size 0x8 lma ffffffff88010168
=> Loading section .dtors, size 0x8 lma ffffffff88010170
=> Loading section .rdata, size 0x1a61 lma ffffffff88010180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011be8
=> Loading section .data, size 0x408 lma ffffffff88011c00
=> Start address ffffffff88000004
=> Transfer rate: 589768 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[270/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid
Time: 0:00:00.252404 psxtmbarrier03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffc0
=> Loading section .init, size 0x48 lma ffffffff88010030
=> Loading section .fini, size 0x30 lma ffffffff88010078
=> Loading section .ctors, size 0x8 lma ffffffff880100a8
=> Loading section .dtors, size 0x8 lma ffffffff880100b0
=> Loading section .rdata, size 0x1a89 lma ffffffff880100c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b50
=> Loading section .data, size 0x408 lma ffffffff88011b68
=> Start address ffffffff88000004
=> Transfer rate: 588552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[271/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:263 W:0 | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid
Time: 0:00:00.252441 psxtmbarrier04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103c0
=> Loading section .init, size 0x48 lma ffffffff88010430
=> Loading section .fini, size 0x30 lma ffffffff88010478
=> Loading section .ctors, size 0x8 lma ffffffff880104a8
=> Loading section .dtors, size 0x8 lma ffffffff880104b0
=> Loading section .rdata, size 0x1a59 lma ffffffff880104c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f20
=> Loading section .data, size 0x408 lma ffffffff88011f38
=> Start address ffffffff88000004
=> Transfer rate: 596360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[272/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid
Time: 0:00:00.256872 psxtmbarrierattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfdf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fdf0
=> Loading section .init, size 0x48 lma ffffffff8800fe60
=> Loading section .fini, size 0x30 lma ffffffff8800fea8
=> Loading section .ctors, size 0x8 lma ffffffff8800fed8
=> Loading section .dtors, size 0x8 lma ffffffff8800fee0
=> Loading section .rdata, size 0x1aed lma ffffffff8800fef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119e0
=> Loading section .data, size 0x408 lma ffffffff880119f8
=> Start address ffffffff88000004
=> Transfer rate: 585640 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[273/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid
Time: 0:00:00.262634 psxtmcleanup01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe10
=> Loading section .init, size 0x48 lma ffffffff8800fe80
=> Loading section .fini, size 0x30 lma ffffffff8800fec8
=> Loading section .ctors, size 0x8 lma ffffffff8800fef8
=> Loading section .dtors, size 0x8 lma ffffffff8800ff00
=> Loading section .rdata, size 0x1a5d lma ffffffff8800ff10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011970
=> Loading section .data, size 0x440 lma ffffffff88011988
=> Start address ffffffff88000004
=> Transfer rate: 585192 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[274/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid
Time: 0:00:00.270569 psxtmclocknanosleep01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010650
=> Loading section .init, size 0x48 lma ffffffff880106c0
=> Loading section .fini, size 0x30 lma ffffffff88010708
=> Loading section .ctors, size 0x8 lma ffffffff88010738
=> Loading section .dtors, size 0x8 lma ffffffff88010740
=> Loading section .rdata, size 0x1a05 lma ffffffff88010750
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012158
=> Loading section .data, size 0x418 lma ffffffff88012170
=> Start address ffffffff88000004
=> Transfer rate: 601064 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[275/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid
Time: 0:00:00.264950 psxtmclocknanosleep02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10760 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010760
=> Loading section .init, size 0x48 lma ffffffff880107d0
=> Loading section .fini, size 0x30 lma ffffffff88010818
=> Loading section .ctors, size 0x8 lma ffffffff88010848
=> Loading section .dtors, size 0x8 lma ffffffff88010850
=> Loading section .rdata, size 0x1a61 lma ffffffff88010860
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122c8
=> Loading section .data, size 0x410 lma ffffffff880122e0
=> Start address ffffffff88000004
=> Transfer rate: 603912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[276/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid
Time: 0:00:00.265230 psxtmclocknanosleep03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10760 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010760
=> Loading section .init, size 0x48 lma ffffffff880107d0
=> Loading section .fini, size 0x30 lma ffffffff88010818
=> Loading section .ctors, size 0x8 lma ffffffff88010848
=> Loading section .dtors, size 0x8 lma ffffffff88010850
=> Loading section .rdata, size 0x1a61 lma ffffffff88010860
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122c8
=> Loading section .data, size 0x410 lma ffffffff880122e0
=> Start address ffffffff88000004
=> Transfer rate: 603912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[277/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid
Time: 0:00:00.288279 psxtmcond01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfed0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fed0
=> Loading section .init, size 0x48 lma ffffffff8800ff40
=> Loading section .fini, size 0x30 lma ffffffff8800ff88
=> Loading section .ctors, size 0x8 lma ffffffff8800ffb8
=> Loading section .dtors, size 0x8 lma ffffffff8800ffc0
=> Loading section .rdata, size 0x1a6d lma ffffffff8800ffd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a40
=> Loading section .data, size 0x408 lma ffffffff88011a58
=> Start address ffffffff88000004
=> Transfer rate: 586408 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[278/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid
Time: 0:00:00.262000 psxtmcond02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010170
=> Loading section .init, size 0x48 lma ffffffff880101e0
=> Loading section .fini, size 0x30 lma ffffffff88010228
=> Loading section .ctors, size 0x8 lma ffffffff88010258
=> Loading section .dtors, size 0x8 lma ffffffff88010260
=> Loading section .rdata, size 0x1a6d lma ffffffff88010270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ce0
=> Loading section .data, size 0x408 lma ffffffff88011cf8
=> Start address ffffffff88000004
=> Transfer rate: 591784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[279/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:271 W:0 | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid
Time: 0:00:00.273022 psxtmcond03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b40
=> Loading section .init, size 0x48 lma ffffffff88011bb0
=> Loading section .fini, size 0x30 lma ffffffff88011bf8
=> Loading section .ctors, size 0x8 lma ffffffff88011c28
=> Loading section .dtors, size 0x8 lma ffffffff88011c30
=> Loading section .rdata, size 0x1aa9 lma ffffffff88011c40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136f0
=> Loading section .data, size 0x408 lma ffffffff88013708
=> Start address ffffffff88000004
=> Transfer rate: 645128 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[280/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:276 W:0 | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid
Time: 0:00:00.252686 psxtmcond04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b20
=> Loading section .init, size 0x48 lma ffffffff88011b90
=> Loading section .fini, size 0x30 lma ffffffff88011bd8
=> Loading section .ctors, size 0x8 lma ffffffff88011c08
=> Loading section .dtors, size 0x8 lma ffffffff88011c10
=> Loading section .rdata, size 0x1aa1 lma ffffffff88011c20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136c8
=> Loading section .data, size 0x408 lma ffffffff880136e0
=> Start address ffffffff88000004
=> Transfer rate: 644808 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[281/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:278 W:0 | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid
Time: 0:00:00.254925 psxtmcond05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010170
=> Loading section .init, size 0x48 lma ffffffff880101e0
=> Loading section .fini, size 0x30 lma ffffffff88010228
=> Loading section .ctors, size 0x8 lma ffffffff88010258
=> Loading section .dtors, size 0x8 lma ffffffff88010260
=> Loading section .rdata, size 0x1a75 lma ffffffff88010270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ce8
=> Loading section .data, size 0x408 lma ffffffff88011d00
=> Start address ffffffff88000004
=> Transfer rate: 591848 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[282/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:279 W:0 | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid
Time: 0:00:00.283515 psxtmcond06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ca0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011ca0
=> Loading section .init, size 0x48 lma ffffffff88011d10
=> Loading section .fini, size 0x30 lma ffffffff88011d58
=> Loading section .ctors, size 0x8 lma ffffffff88011d88
=> Loading section .dtors, size 0x8 lma ffffffff88011d90
=> Loading section .rdata, size 0x1ab1 lma ffffffff88011da0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013858
=> Loading section .data, size 0x408 lma ffffffff88013870
=> Start address ffffffff88000004
=> Transfer rate: 648008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[283/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:278 W:0 | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid
Time: 0:00:00.265622 psxtmcond07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011830
=> Loading section .init, size 0x48 lma ffffffff880118a0
=> Loading section .fini, size 0x30 lma ffffffff880118e8
=> Loading section .ctors, size 0x8 lma ffffffff88011918
=> Loading section .dtors, size 0x8 lma ffffffff88011920
=> Loading section .rdata, size 0x1ab1 lma ffffffff88011930
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133e8
=> Loading section .data, size 0x408 lma ffffffff88013400
=> Start address ffffffff88000004
=> Transfer rate: 638920 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[284/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:279 W:0 | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid
Time: 0:00:00.254563 psxtmcond08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011520
=> Loading section .init, size 0x48 lma ffffffff88011590
=> Loading section .fini, size 0x30 lma ffffffff880115d8
=> Loading section .ctors, size 0x8 lma ffffffff88011608
=> Loading section .dtors, size 0x8 lma ffffffff88011610
=> Loading section .rdata, size 0x1aa1 lma ffffffff88011620
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130c8
=> Loading section .data, size 0x408 lma ffffffff880130e0
=> Start address ffffffff88000004
=> Transfer rate: 632520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[285/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:278 W:0 | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid
Time: 0:00:00.259060 psxtmcond09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11550 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011550
=> Loading section .init, size 0x48 lma ffffffff880115c0
=> Loading section .fini, size 0x30 lma ffffffff88011608
=> Loading section .ctors, size 0x8 lma ffffffff88011638
=> Loading section .dtors, size 0x8 lma ffffffff88011640
=> Loading section .rdata, size 0x1ab1 lma ffffffff88011650
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013108
=> Loading section .data, size 0x408 lma ffffffff88013120
=> Start address ffffffff88000004
=> Transfer rate: 633032 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[286/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:279 W:0 | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid
Time: 0:00:00.293694 psxtmcond10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x115b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880115b0
=> Loading section .init, size 0x48 lma ffffffff88011620
=> Loading section .fini, size 0x30 lma ffffffff88011668
=> Loading section .ctors, size 0x8 lma ffffffff88011698
=> Loading section .dtors, size 0x8 lma ffffffff880116a0
=> Loading section .rdata, size 0x1ac9 lma ffffffff880116b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013180
=> Loading section .data, size 0x408 lma ffffffff88013198
=> Start address ffffffff88000004
=> Transfer rate: 633992 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[287/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:281 W:0 | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid
Time: 0:00:00.254032 psxtmkey01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100d0
=> Loading section .init, size 0x48 lma ffffffff88010140
=> Loading section .fini, size 0x30 lma ffffffff88010188
=> Loading section .ctors, size 0x8 lma ffffffff880101b8
=> Loading section .dtors, size 0x8 lma ffffffff880101c0
=> Loading section .rdata, size 0x1a5d lma ffffffff880101d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c30
=> Loading section .data, size 0x470 lma ffffffff88011c48
=> Start address ffffffff88000004
=> Transfer rate: 591208 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[288/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:283 W:0 | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid
Time: 0:00:00.251525 psxtmkey02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105e0
=> Loading section .init, size 0x48 lma ffffffff88010650
=> Loading section .fini, size 0x30 lma ffffffff88010698
=> Loading section .ctors, size 0x8 lma ffffffff880106c8
=> Loading section .dtors, size 0x8 lma ffffffff880106d0
=> Loading section .rdata, size 0x1a7d lma ffffffff880106e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012160
=> Loading section .data, size 0x470 lma ffffffff88012178
=> Start address ffffffff88000004
=> Transfer rate: 601832 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[289/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:283 W:0 | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid
Time: 0:00:00.263938 psxtmmq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12cc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012cc0
=> Loading section .init, size 0x48 lma ffffffff88012d30
=> Loading section .fini, size 0x30 lma ffffffff88012d78
=> Loading section .ctors, size 0x8 lma ffffffff88012da8
=> Loading section .dtors, size 0x8 lma ffffffff88012db0
=> Loading section .rdata, size 0x1d2d lma ffffffff88012dc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014af0
=> Loading section .data, size 0x448 lma ffffffff88014b08
=> Start address ffffffff88000004
=> Transfer rate: 686632 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[290/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid
Time: 0:00:00.260687 psxtmmqrcvblock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10dc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010dc0
=> Loading section .init, size 0x48 lma ffffffff88010e30
=> Loading section .fini, size 0x30 lma ffffffff88010e78
=> Loading section .ctors, size 0x8 lma ffffffff88010ea8
=> Loading section .dtors, size 0x8 lma ffffffff88010eb0
=> Loading section .rdata, size 0x1a91 lma ffffffff88010ec0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012958
=> Loading section .data, size 0x438 lma ffffffff88012970
=> Start address ffffffff88000004
=> Transfer rate: 617672 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[291/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid
Time: 0:00:00.259027 psxtmmqrcvblock02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014c30
=> Loading section .init, size 0x48 lma ffffffff88014ca0
=> Loading section .fini, size 0x30 lma ffffffff88014ce8
=> Loading section .ctors, size 0x8 lma ffffffff88014d18
=> Loading section .dtors, size 0x8 lma ffffffff88014d20
=> Loading section .rdata, size 0x1c5c lma ffffffff88014d30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016990
=> Loading section .data, size 0x4a8 lma ffffffff880169a8
=> Start address ffffffff88000004
=> Transfer rate: 750112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[292/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid
Time: 0:00:00.259544 psxtmmutex01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff20
=> Loading section .init, size 0x48 lma ffffffff8800ff90
=> Loading section .fini, size 0x30 lma ffffffff8800ffd8
=> Loading section .ctors, size 0x8 lma ffffffff88010008
=> Loading section .dtors, size 0x8 lma ffffffff88010010
=> Loading section .rdata, size 0x1a75 lma ffffffff88010020
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a98
=> Loading section .data, size 0x408 lma ffffffff88011ab0
=> Start address ffffffff88000004
=> Transfer rate: 587112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[293/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid
Time: 0:00:00.251403 psxtmmutex02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10740 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010740
=> Loading section .init, size 0x48 lma ffffffff880107b0
=> Loading section .fini, size 0x30 lma ffffffff880107f8
=> Loading section .ctors, size 0x8 lma ffffffff88010828
=> Loading section .dtors, size 0x8 lma ffffffff88010830
=> Loading section .rdata, size 0x1a81 lma ffffffff88010840
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122c8
=> Loading section .data, size 0x408 lma ffffffff880122e0
=> Start address ffffffff88000004
=> Transfer rate: 603848 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[294/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid
Time: 0:00:00.254342 psxtmmutex03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110b0
=> Loading section .init, size 0x48 lma ffffffff88011120
=> Loading section .fini, size 0x30 lma ffffffff88011168
=> Loading section .ctors, size 0x8 lma ffffffff88011198
=> Loading section .dtors, size 0x8 lma ffffffff880111a0
=> Loading section .rdata, size 0x1b15 lma ffffffff880111b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cc8
=> Loading section .data, size 0x408 lma ffffffff88012ce0
=> Start address ffffffff88000004
=> Transfer rate: 624360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[295/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid
Time: 0:00:00.261431 psxtmmutex04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b70
=> Loading section .init, size 0x48 lma ffffffff88010be0
=> Loading section .fini, size 0x30 lma ffffffff88010c28
=> Loading section .ctors, size 0x8 lma ffffffff88010c58
=> Loading section .dtors, size 0x8 lma ffffffff88010c60
=> Loading section .rdata, size 0x1a89 lma ffffffff88010c70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012700
=> Loading section .data, size 0x408 lma ffffffff88012718
=> Start address ffffffff88000004
=> Transfer rate: 612488 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[296/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid
Time: 0:00:00.258166 psxtmmutex05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a10
=> Loading section .init, size 0x48 lma ffffffff88010a80
=> Loading section .fini, size 0x30 lma ffffffff88010ac8
=> Loading section .ctors, size 0x8 lma ffffffff88010af8
=> Loading section .dtors, size 0x8 lma ffffffff88010b00
=> Loading section .rdata, size 0x1a91 lma ffffffff88010b10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125a8
=> Loading section .data, size 0x408 lma ffffffff880125c0
=> Start address ffffffff88000004
=> Transfer rate: 609736 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[297/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:289 W:0 | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid
Time: 0:00:00.259631 psxtmmutex06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c30
=> Loading section .init, size 0x48 lma ffffffff88010ca0
=> Loading section .fini, size 0x30 lma ffffffff88010ce8
=> Loading section .ctors, size 0x8 lma ffffffff88010d18
=> Loading section .dtors, size 0x8 lma ffffffff88010d20
=> Loading section .rdata, size 0x1a89 lma ffffffff88010d30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127c0
=> Loading section .data, size 0x408 lma ffffffff880127d8
=> Start address ffffffff88000004
=> Transfer rate: 614024 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[298/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:291 W:0 | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid
Time: 0:00:00.251729 psxtmmutex07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e20
=> Loading section .init, size 0x48 lma ffffffff88010e90
=> Loading section .fini, size 0x30 lma ffffffff88010ed8
=> Loading section .ctors, size 0x8 lma ffffffff88010f08
=> Loading section .dtors, size 0x8 lma ffffffff88010f10
=> Loading section .rdata, size 0x1aa5 lma ffffffff88010f20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129c8
=> Loading section .data, size 0x408 lma ffffffff880129e0
=> Start address ffffffff88000004
=> Transfer rate: 618216 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[299/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:293 W:0 | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid
Time: 0:00:00.299350 psxtmmutexattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10180 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010180
=> Loading section .init, size 0x48 lma ffffffff880101f0
=> Loading section .fini, size 0x30 lma ffffffff88010238
=> Loading section .ctors, size 0x8 lma ffffffff88010268
=> Loading section .dtors, size 0x8 lma ffffffff88010270
=> Loading section .rdata, size 0x1c5d lma ffffffff88010280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ee0
=> Loading section .data, size 0x408 lma ffffffff88011ef8
=> Start address ffffffff88000004
=> Transfer rate: 595880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[300/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:292 W:0 | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid
Time: 0:00:00.272858 psxtmnanosleep01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010700
=> Loading section .fini, size 0x30 lma ffffffff88010748
=> Loading section .ctors, size 0x8 lma ffffffff88010778
=> Loading section .dtors, size 0x8 lma ffffffff88010780
=> Loading section .rdata, size 0x1a05 lma ffffffff88010790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012198
=> Loading section .data, size 0x410 lma ffffffff880121b0
=> Start address ffffffff88000004
=> Transfer rate: 601512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[301/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:298 W:0 | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid
Time: 0:00:00.254483 psxtmnanosleep02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107a0
=> Loading section .init, size 0x48 lma ffffffff88010810
=> Loading section .fini, size 0x30 lma ffffffff88010858
=> Loading section .ctors, size 0x8 lma ffffffff88010888
=> Loading section .dtors, size 0x8 lma ffffffff88010890
=> Loading section .rdata, size 0x1a51 lma ffffffff880108a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122f8
=> Loading section .data, size 0x418 lma ffffffff88012310
=> Start address ffffffff88000004
=> Transfer rate: 604360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[302/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:298 W:0 | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid
Time: 0:00:00.258990 psxtmonce01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010140
=> Loading section .init, size 0x48 lma ffffffff880101b0
=> Loading section .fini, size 0x30 lma ffffffff880101f8
=> Loading section .ctors, size 0x8 lma ffffffff88010228
=> Loading section .dtors, size 0x8 lma ffffffff88010230
=> Loading section .rdata, size 0x1a4d lma ffffffff88010240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c90
=> Loading section .data, size 0x430 lma ffffffff88011ca8
=> Start address ffffffff88000004
=> Transfer rate: 591464 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[303/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:299 W:0 | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid
Time: 0:00:00.286796 psxtmrwlock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e80
=> Loading section .init, size 0x48 lma ffffffff88010ef0
=> Loading section .fini, size 0x30 lma ffffffff88010f38
=> Loading section .ctors, size 0x8 lma ffffffff88010f68
=> Loading section .dtors, size 0x8 lma ffffffff88010f70
=> Loading section .rdata, size 0x1bed lma ffffffff88010f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b70
=> Loading section .data, size 0x408 lma ffffffff88012b88
=> Start address ffffffff88000004
=> Transfer rate: 621608 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[304/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:299 W:0 | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid
Time: 0:00:00.269699 psxtmrwlock02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10380 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010380
=> Loading section .init, size 0x48 lma ffffffff880103f0
=> Loading section .fini, size 0x30 lma ffffffff88010438
=> Loading section .ctors, size 0x8 lma ffffffff88010468
=> Loading section .dtors, size 0x8 lma ffffffff88010470
=> Loading section .rdata, size 0x1a61 lma ffffffff88010480
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ee8
=> Loading section .data, size 0x408 lma ffffffff88011f00
=> Start address ffffffff88000004
=> Transfer rate: 595912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[305/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:299 W:0 | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid
Time: 0:00:00.256698 psxtmrwlock03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=> Loading section .init, size 0x48 lma ffffffff88010ae0
=> Loading section .fini, size 0x30 lma ffffffff88010b28
=> Loading section .ctors, size 0x8 lma ffffffff88010b58
=> Loading section .dtors, size 0x8 lma ffffffff88010b60
=> Loading section .rdata, size 0x1a69 lma ffffffff88010b70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125e0
=> Loading section .data, size 0x408 lma ffffffff880125f8
=> Start address ffffffff88000004
=> Transfer rate: 610184 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[306/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:299 W:0 | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid
Time: 0:00:00.273984 psxtmrwlock04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x101c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880101c0
=> Loading section .init, size 0x48 lma ffffffff88010230
=> Loading section .fini, size 0x30 lma ffffffff88010278
=> Loading section .ctors, size 0x8 lma ffffffff880102a8
=> Loading section .dtors, size 0x8 lma ffffffff880102b0
=> Loading section .rdata, size 0x1a61 lma ffffffff880102c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d28
=> Loading section .data, size 0x408 lma ffffffff88011d40
=> Start address ffffffff88000004
=> Transfer rate: 592328 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[307/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:300 W:0 | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid
Time: 0:00:00.253372 psxtmrwlock05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108a0
=> Loading section .init, size 0x48 lma ffffffff88010910
=> Loading section .fini, size 0x30 lma ffffffff88010958
=> Loading section .ctors, size 0x8 lma ffffffff88010988
=> Loading section .dtors, size 0x8 lma ffffffff88010990
=> Loading section .rdata, size 0x1a69 lma ffffffff880109a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012410
=> Loading section .data, size 0x408 lma ffffffff88012428
=> Start address ffffffff88000004
=> Transfer rate: 606472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[308/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:302 W:0 | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid
Time: 0:00:00.253664 psxtmrwlock06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10320 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010320
=> Loading section .init, size 0x48 lma ffffffff88010390
=> Loading section .fini, size 0x30 lma ffffffff880103d8
=> Loading section .ctors, size 0x8 lma ffffffff88010408
=> Loading section .dtors, size 0x8 lma ffffffff88010410
=> Loading section .rdata, size 0x1a69 lma ffffffff88010420
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e90
=> Loading section .data, size 0x408 lma ffffffff88011ea8
=> Start address ffffffff88000004
=> Transfer rate: 595208 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[309/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:307 W:0 | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid
Time: 0:00:00.253185 psxtmrwlock07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010510
=> Loading section .init, size 0x48 lma ffffffff88010580
=> Loading section .fini, size 0x30 lma ffffffff880105c8
=> Loading section .ctors, size 0x8 lma ffffffff880105f8
=> Loading section .dtors, size 0x8 lma ffffffff88010600
=> Loading section .rdata, size 0x1a61 lma ffffffff88010610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012078
=> Loading section .data, size 0x408 lma ffffffff88012090
=> Start address ffffffff88000004
=> Transfer rate: 599112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[310/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid
Time: 0:00:00.254294 psxtmsem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010700
=> Loading section .fini, size 0x30 lma ffffffff88010748
=> Loading section .ctors, size 0x8 lma ffffffff88010778
=> Loading section .dtors, size 0x8 lma ffffffff88010780
=> Loading section .rdata, size 0x1b15 lma ffffffff88010790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122a8
=> Loading section .data, size 0x438 lma ffffffff880122c0
=> Start address ffffffff88000004
=> Transfer rate: 604008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[311/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid
Time: 0:00:00.345683 psxtmsem02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10630 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010630
=> Loading section .init, size 0x48 lma ffffffff880106a0
=> Loading section .fini, size 0x30 lma ffffffff880106e8
=> Loading section .ctors, size 0x8 lma ffffffff88010718
=> Loading section .dtors, size 0x8 lma ffffffff88010720
=> Loading section .rdata, size 0x1ab5 lma ffffffff88010730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121e8
=> Loading section .data, size 0x408 lma ffffffff88012200
=> Start address ffffffff88000004
=> Transfer rate: 602088 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[312/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid
Time: 0:00:00.261186 psxtmsem03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x101f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880101f0
=> Loading section .init, size 0x48 lma ffffffff88010260
=> Loading section .fini, size 0x30 lma ffffffff880102a8
=> Loading section .ctors, size 0x8 lma ffffffff880102d8
=> Loading section .dtors, size 0x8 lma ffffffff880102e0
=> Loading section .rdata, size 0x1a51 lma ffffffff880102f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d48
=> Loading section .data, size 0x408 lma ffffffff88011d60
=> Start address ffffffff88000004
=> Transfer rate: 592584 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[313/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid
Time: 0:00:00.252135 psxtmsem04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1a59 lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f60
=> Loading section .data, size 0x408 lma ffffffff88011f78
=> Start address ffffffff88000004
=> Transfer rate: 596872 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[314/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid
Time: 0:00:00.265643 psxtmsem05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105f0
=> Loading section .init, size 0x48 lma ffffffff88010660
=> Loading section .fini, size 0x30 lma ffffffff880106a8
=> Loading section .ctors, size 0x8 lma ffffffff880106d8
=> Loading section .dtors, size 0x8 lma ffffffff880106e0
=> Loading section .rdata, size 0x1a59 lma ffffffff880106f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012150
=> Loading section .data, size 0x408 lma ffffffff88012168
=> Start address ffffffff88000004
=> Transfer rate: 600840 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[315/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid
Time: 0:00:00.305430 psxtmsleep01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106f0
=> Loading section .init, size 0x48 lma ffffffff88010760
=> Loading section .fini, size 0x30 lma ffffffff880107a8
=> Loading section .ctors, size 0x8 lma ffffffff880107d8
=> Loading section .dtors, size 0x8 lma ffffffff880107e0
=> Loading section .rdata, size 0x1a04 lma ffffffff880107f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121f8
=> Loading section .data, size 0x414 lma ffffffff88012210
=> Start address ffffffff88000004
=> Transfer rate: 602304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[316/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:308 W:0 | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid
Time: 0:00:00.253879 psxtmsleep02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107e0
=> Loading section .init, size 0x48 lma ffffffff88010850
=> Loading section .fini, size 0x30 lma ffffffff88010898
=> Loading section .ctors, size 0x8 lma ffffffff880108c8
=> Loading section .dtors, size 0x8 lma ffffffff880108d0
=> Loading section .rdata, size 0x1a48 lma ffffffff880108e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012328
=> Loading section .data, size 0x414 lma ffffffff88012340
=> Start address ffffffff88000004
=> Transfer rate: 604768 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[317/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:310 W:0 | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid
Time: 0:00:00.270983 psxtmthread01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd60
=> Loading section .init, size 0x48 lma ffffffff8800fdd0
=> Loading section .fini, size 0x30 lma ffffffff8800fe18
=> Loading section .ctors, size 0x8 lma ffffffff8800fe48
=> Loading section .dtors, size 0x8 lma ffffffff8800fe50
=> Loading section .rdata, size 0x1a31 lma ffffffff8800fe60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011898
=> Loading section .data, size 0x408 lma ffffffff880118b0
=> Start address ffffffff88000004
=> Transfer rate: 582984 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[318/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:311 W:0 | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid
Time: 0:00:00.260471 psxtmthread02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe00
=> Loading section .init, size 0x48 lma ffffffff8800fe70
=> Loading section .fini, size 0x30 lma ffffffff8800feb8
=> Loading section .ctors, size 0x8 lma ffffffff8800fee8
=> Loading section .dtors, size 0x8 lma ffffffff8800fef0
=> Loading section .rdata, size 0x1a31 lma ffffffff8800ff00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011938
=> Loading section .data, size 0x408 lma ffffffff88011950
=> Start address ffffffff88000004
=> Transfer rate: 584264 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[319/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:311 W:0 | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid
Time: 0:00:00.272828 psxtmthread03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd30
=> Loading section .init, size 0x48 lma ffffffff8800fda0
=> Loading section .fini, size 0x30 lma ffffffff8800fde8
=> Loading section .ctors, size 0x8 lma ffffffff8800fe18
=> Loading section .dtors, size 0x8 lma ffffffff8800fe20
=> Loading section .rdata, size 0x1a31 lma ffffffff8800fe30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011868
=> Loading section .data, size 0x408 lma ffffffff88011880
=> Start address ffffffff88000004
=> Transfer rate: 582600 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[320/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:318 W:0 | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid
Time: 0:00:00.271829 psxtmthread04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100e0
=> Loading section .init, size 0x48 lma ffffffff88010150
=> Loading section .fini, size 0x30 lma ffffffff88010198
=> Loading section .ctors, size 0x8 lma ffffffff880101c8
=> Loading section .dtors, size 0x8 lma ffffffff880101d0
=> Loading section .rdata, size 0x1a65 lma ffffffff880101e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c48
=> Loading section .data, size 0x408 lma ffffffff88011c60
=> Start address ffffffff88000004
=> Transfer rate: 590568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[321/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:318 W:0 | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid
Time: 0:00:00.274636 psxtmthread05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10120 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010120
=> Loading section .init, size 0x48 lma ffffffff88010190
=> Loading section .fini, size 0x30 lma ffffffff880101d8
=> Loading section .ctors, size 0x8 lma ffffffff88010208
=> Loading section .dtors, size 0x8 lma ffffffff88010210
=> Loading section .rdata, size 0x1a51 lma ffffffff88010220
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c78
=> Loading section .data, size 0x408 lma ffffffff88011c90
=> Start address ffffffff88000004
=> Transfer rate: 590920 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[322/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:318 W:0 | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid
Time: 0:00:00.270090 psxtmthread06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10120 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010120
=> Loading section .init, size 0x48 lma ffffffff88010190
=> Loading section .fini, size 0x30 lma ffffffff880101d8
=> Loading section .ctors, size 0x8 lma ffffffff88010208
=> Loading section .dtors, size 0x8 lma ffffffff88010210
=> Loading section .rdata, size 0x1a51 lma ffffffff88010220
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c78
=> Loading section .data, size 0x408 lma ffffffff88011c90
=> Start address ffffffff88000004
=> Transfer rate: 590920 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[323/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:319 W:0 | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid
Time: 0:00:00.272599 psxtmthreadattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105c0
=> Loading section .init, size 0x48 lma ffffffff88010630
=> Loading section .fini, size 0x30 lma ffffffff88010678
=> Loading section .ctors, size 0x8 lma ffffffff880106a8
=> Loading section .dtors, size 0x8 lma ffffffff880106b0
=> Loading section .rdata, size 0x1d75 lma ffffffff880106c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012438
=> Loading section .data, size 0x408 lma ffffffff88012450
=> Start address ffffffff88000004
=> Transfer rate: 606824 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[324/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:319 W:0 | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid
Time: 0:00:00.266538 rhdeadlockbrk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011680
=> Loading section .init, size 0x48 lma ffffffff880116f0
=> Loading section .fini, size 0x30 lma ffffffff88011738
=> Loading section .ctors, size 0x8 lma ffffffff88011768
=> Loading section .dtors, size 0x8 lma ffffffff88011770
=> Loading section .rdata, size 0x1e8d lma ffffffff88011780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013610
=> Loading section .data, size 0x438 lma ffffffff88013628
=> Start address ffffffff88000004
=> Transfer rate: 643752 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[325/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:319 W:0 | mipstx39/jmr3904: rhilatency.exe
Result: invalid
Time: 0:00:00.264280 rhilatency.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f840
=> Loading section .init, size 0x48 lma ffffffff8800f8b0
=> Loading section .fini, size 0x30 lma ffffffff8800f8f8
=> Loading section .ctors, size 0x8 lma ffffffff8800f928
=> Loading section .dtors, size 0x8 lma ffffffff8800f930
=> Loading section .rdata, size 0x1dc1 lma ffffffff8800f940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011708
=> Loading section .data, size 0x408 lma ffffffff88011720
=> Start address ffffffff88000004
=> Transfer rate: 579784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[326/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:319 W:0 | mipstx39/jmr3904: rhmlatency.exe
Result: invalid
Time: 0:00:00.272048 rhmlatency.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10590 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010590
=> Loading section .init, size 0x48 lma ffffffff88010600
=> Loading section .fini, size 0x30 lma ffffffff88010648
=> Loading section .ctors, size 0x8 lma ffffffff88010678
=> Loading section .dtors, size 0x8 lma ffffffff88010680
=> Loading section .rdata, size 0x1e31 lma ffffffff88010690
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124c8
=> Loading section .data, size 0x438 lma ffffffff880124e0
=> Start address ffffffff88000004
=> Transfer rate: 608328 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[327/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:319 W:0 | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid
Time: 0:00:00.257130 rhsemshuffle.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011f50
=> Loading section .init, size 0x48 lma ffffffff88011fc0
=> Loading section .fini, size 0x30 lma ffffffff88012008
=> Loading section .ctors, size 0x8 lma ffffffff88012038
=> Loading section .dtors, size 0x8 lma ffffffff88012040
=> Loading section .rdata, size 0x1ea1 lma ffffffff88012050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ef8
=> Loading section .data, size 0x448 lma ffffffff88013f10
=> Start address ffffffff88000004
=> Transfer rate: 662088 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[328/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:325 W:0 | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid
Time: 0:00:00.260719 rhtaskpreempt.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f690
=> Loading section .init, size 0x48 lma ffffffff8800f700
=> Loading section .fini, size 0x30 lma ffffffff8800f748
=> Loading section .ctors, size 0x8 lma ffffffff8800f778
=> Loading section .dtors, size 0x8 lma ffffffff8800f780
=> Loading section .rdata, size 0x1e09 lma ffffffff8800f790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115a0
=> Loading section .data, size 0x408 lma ffffffff880115b8
=> Start address ffffffff88000004
=> Transfer rate: 576904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[329/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:325 W:0 | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid
Time: 0:00:00.254800 rhtaskswitch.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f520
=> Loading section .init, size 0x48 lma ffffffff8800f590
=> Loading section .fini, size 0x30 lma ffffffff8800f5d8
=> Loading section .ctors, size 0x8 lma ffffffff8800f608
=> Loading section .dtors, size 0x8 lma ffffffff8800f610
=> Loading section .rdata, size 0x1e09 lma ffffffff8800f620
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011430
=> Loading section .data, size 0x408 lma ffffffff88011448
=> Start address ffffffff88000004
=> Transfer rate: 573960 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[330/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:327 W:0 | mipstx39/jmr3904: base_sp.exe
Result: invalid
Time: 0:00:00.279610 base_sp.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010210
=> Loading section .init, size 0x48 lma ffffffff88010280
=> Loading section .fini, size 0x30 lma ffffffff880102c8
=> Loading section .ctors, size 0x8 lma ffffffff880102f8
=> Loading section .dtors, size 0x8 lma ffffffff88010300
=> Loading section .rdata, size 0x1e4d lma ffffffff88010310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012160
=> Loading section .data, size 0x418 lma ffffffff88012178
=> Start address ffffffff88000004
=> Transfer rate: 601128 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[331/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:327 W:0 | mipstx39/jmr3904: capture.exe
Result: invalid
Time: 0:00:00.260559 capture.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2fc70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8802fc70
=> Loading section .init, size 0x48 lma ffffffff8802fcf0
=> Loading section .fini, size 0x30 lma ffffffff8802fd38
=> Loading section .ctors, size 0x8 lma ffffffff8802fd68
=> Loading section .dtors, size 0x8 lma ffffffff8802fd70
=> Loading section .rdata, size 0x5714 lma ffffffff8802fd80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88035498
=> Loading section .data, size 0x984 lma ffffffff880354b0
=> Start address ffffffff88000004
=> Transfer rate: 1765696 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[332/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:327 W:0 | mipstx39/jmr3904: cdtest.exe
Result: invalid
Time: 0:00:00.258323 cdtest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2d7f8 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x88 lma ffffffff8802d7f8
=> Loading section .init, size 0x48 lma ffffffff8802d880
=> Loading section .fini, size 0x30 lma ffffffff8802d8c8
=> Loading section .ctors, size 0x1c lma ffffffff8802d8f8
=> Loading section .dtors, size 0x8 lma ffffffff8802d914
=> Loading section .rdata, size 0x462c lma ffffffff8802d920
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88031f50
=> Loading section .rel.dyn, size 0x20 lma ffffffff88031f68
=> Loading section .data, size 0x640 lma ffffffff88031f88
=> Loading section .sdata, size 0x4 lma ffffffff880325c8
=> Start address ffffffff88000004
=> Transfer rate: 1650208 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[333/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:327 W:0 | mipstx39/jmr3904: fileio.exe
Result: invalid
Time: 0:00:00.256919 fileio.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x85c70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88085c70
=> Loading section .init, size 0x48 lma ffffffff88085cf0
=> Loading section .fini, size 0x30 lma ffffffff88085d38
=> Loading section .ctors, size 0x8 lma ffffffff88085d68
=> Loading section .dtors, size 0x8 lma ffffffff88085d70
=> Loading section .rdata, size 0x12c38 lma ffffffff88085d80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880989b8
=> Loading section .data, size 0x14c8 lma ffffffff880989d0
=> Start address ffffffff88000004
=> Transfer rate: 5043328 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[334/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:329 W:0 | mipstx39/jmr3904: hello.exe
Result: invalid
Time: 0:00:00.251389 hello.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17590 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017590
=> Loading section .init, size 0x48 lma ffffffff88017600
=> Loading section .fini, size 0x30 lma ffffffff88017648
=> Loading section .ctors, size 0x8 lma ffffffff88017678
=> Loading section .dtors, size 0x8 lma ffffffff88017680
=> Loading section .rdata, size 0x1fc8 lma ffffffff88017690
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019658
=> Loading section .data, size 0x5a8 lma ffffffff88019670
=> Start address ffffffff88000004
=> Transfer rate: 843904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[335/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:329 W:0 | mipstx39/jmr3904: iostream.exe
Result: invalid
Time: 0:00:00.269844 iostream.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x95670 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88095670
=> Loading section .init, size 0x48 lma ffffffff880956f0
=> Loading section .fini, size 0x30 lma ffffffff88095738
=> Loading section .ctors, size 0x34 lma ffffffff88095768
=> Loading section .dtors, size 0x8 lma ffffffff8809579c
=> Loading section .rdata, size 0xa21c lma ffffffff880957b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8809f9d0
=> Loading section .rel.dyn, size 0x18 lma ffffffff8809f9e8
=> Loading section .data, size 0x718 lma ffffffff8809fa00
=> Loading section .sdata, size 0x4 lma ffffffff880a0118
=> Start address ffffffff88000004
=> Transfer rate: 5245024 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[336/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:330 W:0 | mipstx39/jmr3904: minimum.exe
[337/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:331 W:0 | mipstx39/jmr3904: nsecs.exe
Result: invalid
Time: 0:00:00.257246 nsecs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17ed0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017ed0
=> Loading section .init, size 0x48 lma ffffffff88017f40
=> Loading section .fini, size 0x30 lma ffffffff88017f88
=> Loading section .ctors, size 0x8 lma ffffffff88017fb8
=> Loading section .dtors, size 0x8 lma ffffffff88017fc0
=> Loading section .rdata, size 0x275c lma ffffffff88017fd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a730
=> Loading section .data, size 0x61c lma ffffffff8801a748
=> Start address ffffffff88000004
=> Transfer rate: 879296 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[338/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:332 W:0 | mipstx39/jmr3904: paranoia.exe
Result: invalid
Time: 0:00:00.252331 paranoia.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22220 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88022220
=> Loading section .init, size 0x48 lma ffffffff88022290
=> Loading section .fini, size 0x30 lma ffffffff880222d8
=> Loading section .ctors, size 0x8 lma ffffffff88022308
=> Loading section .dtors, size 0x8 lma ffffffff88022310
=> Loading section .rdata, size 0x5160 lma ffffffff88022320
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027480
=> Loading section .data, size 0x738 lma ffffffff88027498
=> Start address ffffffff88000004
=> Transfer rate: 1302080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[339/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:333 W:0 | mipstx39/jmr3904: ticker.exe
Result: invalid
Time: 0:00:00.272605 ticker.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x115a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880115a0
=> Loading section .init, size 0x48 lma ffffffff88011610
=> Loading section .fini, size 0x30 lma ffffffff88011658
=> Loading section .ctors, size 0x8 lma ffffffff88011688
=> Loading section .dtors, size 0x8 lma ffffffff88011690
=> Loading section .rdata, size 0x2000 lma ffffffff880116a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136a0
=> Loading section .data, size 0x5c0 lma ffffffff880136b8
=> Start address ffffffff88000004
=> Transfer rate: 648064 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[340/600] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: unlimited.exe
Result: invalid
Time: 0:00:00.253331 unlimited.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11d90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011d90
=> Loading section .init, size 0x48 lma ffffffff88011e00
=> Loading section .fini, size 0x30 lma ffffffff88011e48
=> Loading section .ctors, size 0x8 lma ffffffff88011e78
=> Loading section .dtors, size 0x8 lma ffffffff88011e80
=> Loading section .rdata, size 0x1f34 lma ffffffff88011e90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013dc8
=> Loading section .data, size 0x410 lma ffffffff88013de0
=> Start address ffffffff88000004
=> Transfer rate: 659232 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[341/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:338 W:0 | mipstx39/jmr3904: sp01.exe
Result: invalid
Time: 0:00:00.254552 sp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xb7d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff8800b7d0
=> Loading section .init, size 0x48 lma ffffffff8800b830
=> Loading section .fini, size 0x30 lma ffffffff8800b878
=> Loading section .ctors, size 0x8 lma ffffffff8800b8a8
=> Loading section .dtors, size 0x8 lma ffffffff8800b8b0
=> Loading section .rdata, size 0x1bcc lma ffffffff8800b8c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d490
=> Loading section .data, size 0x1f4 lma ffffffff8800d4a8
=> Start address ffffffff88000004
=> Transfer rate: 439424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[342/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:337 W:0 | mipstx39/jmr3904: sp02.exe
Result: invalid
Time: 0:00:00.251744 sp02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011860
=> Loading section .init, size 0x48 lma ffffffff880118d0
=> Loading section .fini, size 0x30 lma ffffffff88011918
=> Loading section .ctors, size 0x8 lma ffffffff88011948
=> Loading section .dtors, size 0x8 lma ffffffff88011950
=> Loading section .rdata, size 0x22d9 lma ffffffff88011960
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c40
=> Loading section .data, size 0x418 lma ffffffff88013c58
=> Start address ffffffff88000004
=> Transfer rate: 656136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[343/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:337 W:0 | mipstx39/jmr3904: sp03.exe
Result: invalid
Time: 0:00:00.266044 sp03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11a50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011a50
=> Loading section .init, size 0x48 lma ffffffff88011ac0
=> Loading section .fini, size 0x30 lma ffffffff88011b08
=> Loading section .ctors, size 0x8 lma ffffffff88011b38
=> Loading section .dtors, size 0x8 lma ffffffff88011b40
=> Loading section .rdata, size 0x20c4 lma ffffffff88011b50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c18
=> Loading section .data, size 0x440 lma ffffffff88013c30
=> Start address ffffffff88000004
=> Transfer rate: 656160 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[344/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:338 W:0 | mipstx39/jmr3904: sp04.exe
Result: invalid
Time: 0:00:00.299883 sp04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13340 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013340
=> Loading section .init, size 0x48 lma ffffffff880133c0
=> Loading section .fini, size 0x30 lma ffffffff88013408
=> Loading section .ctors, size 0x8 lma ffffffff88013438
=> Loading section .dtors, size 0x8 lma ffffffff88013440
=> Loading section .rdata, size 0x232c lma ffffffff88013450
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015780
=> Loading section .data, size 0x610 lma ffffffff88015798
=> Start address ffffffff88000004
=> Transfer rate: 716000 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[345/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:338 W:0 | mipstx39/jmr3904: sp05.exe
Result: invalid
Time: 0:00:00.260447 sp05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10aa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010aa0
=> Loading section .init, size 0x48 lma ffffffff88010b10
=> Loading section .fini, size 0x30 lma ffffffff88010b58
=> Loading section .ctors, size 0x8 lma ffffffff88010b88
=> Loading section .dtors, size 0x8 lma ffffffff88010b90
=> Loading section .rdata, size 0x212d lma ffffffff88010ba0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cd0
=> Loading section .data, size 0x418 lma ffffffff88012ce8
=> Start address ffffffff88000004
=> Transfer rate: 624552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[346/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:338 W:0 | mipstx39/jmr3904: sp06.exe
Result: invalid
Time: 0:00:00.268193 sp06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c20
=> Loading section .init, size 0x48 lma ffffffff88010c90
=> Loading section .fini, size 0x30 lma ffffffff88010cd8
=> Loading section .ctors, size 0x8 lma ffffffff88010d08
=> Loading section .dtors, size 0x8 lma ffffffff88010d10
=> Loading section .rdata, size 0x1fb9 lma ffffffff88010d20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ce0
=> Loading section .data, size 0x418 lma ffffffff88012cf8
=> Start address ffffffff88000004
=> Transfer rate: 624648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[347/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:338 W:0 | mipstx39/jmr3904: sp07.exe
Result: invalid
Time: 0:00:00.281010 sp07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12550 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012550
=> Loading section .init, size 0x48 lma ffffffff880125c0
=> Loading section .fini, size 0x30 lma ffffffff88012608
=> Loading section .ctors, size 0x8 lma ffffffff88012638
=> Loading section .dtors, size 0x8 lma ffffffff88012640
=> Loading section .rdata, size 0x2678 lma ffffffff88012650
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014cc8
=> Loading section .data, size 0x5e8 lma ffffffff88014ce0
=> Start address ffffffff88000004
=> Transfer rate: 693760 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[348/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:342 W:0 | mipstx39/jmr3904: sp08.exe
Result: invalid
Time: 0:00:00.256207 sp08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfb80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fb80
=> Loading section .init, size 0x48 lma ffffffff8800fbf0
=> Loading section .fini, size 0x30 lma ffffffff8800fc38
=> Loading section .ctors, size 0x8 lma ffffffff8800fc68
=> Loading section .dtors, size 0x8 lma ffffffff8800fc70
=> Loading section .rdata, size 0x2111 lma ffffffff8800fc80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d98
=> Loading section .data, size 0x408 lma ffffffff88011db0
=> Start address ffffffff88000004
=> Transfer rate: 593224 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[349/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp11.exe
Result: invalid
Time: 0:00:00.258356 sp11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x154c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880154c0
=> Loading section .init, size 0x48 lma ffffffff88015530
=> Loading section .fini, size 0x30 lma ffffffff88015578
=> Loading section .ctors, size 0x8 lma ffffffff880155a8
=> Loading section .dtors, size 0x8 lma ffffffff880155b0
=> Loading section .rdata, size 0x3061 lma ffffffff880155c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018628
=> Loading section .data, size 0x470 lma ffffffff88018640
=> Start address ffffffff88000004
=> Transfer rate: 808200 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[350/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp12.exe
Result: invalid
Time: 0:00:00.262304 sp12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014680
=> Loading section .init, size 0x48 lma ffffffff880146f0
=> Loading section .fini, size 0x30 lma ffffffff88014738
=> Loading section .ctors, size 0x8 lma ffffffff88014768
=> Loading section .dtors, size 0x8 lma ffffffff88014770
=> Loading section .rdata, size 0x2ea4 lma ffffffff88014780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017628
=> Loading section .data, size 0x448 lma ffffffff88017640
=> Start address ffffffff88000004
=> Transfer rate: 775136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[351/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp13.exe
Result: invalid
Time: 0:00:00.251513 sp13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x148c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880148c0
=> Loading section .init, size 0x48 lma ffffffff88014930
=> Loading section .fini, size 0x30 lma ffffffff88014978
=> Loading section .ctors, size 0x8 lma ffffffff880149a8
=> Loading section .dtors, size 0x8 lma ffffffff880149b0
=> Loading section .rdata, size 0x2c29 lma ffffffff880149c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880175f0
=> Loading section .data, size 0x448 lma ffffffff88017608
=> Start address ffffffff88000004
=> Transfer rate: 774664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[352/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp14.exe
Result: invalid
Time: 0:00:00.275757 sp14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880114a0
=> Loading section .init, size 0x48 lma ffffffff88011510
=> Loading section .fini, size 0x30 lma ffffffff88011558
=> Loading section .ctors, size 0x8 lma ffffffff88011588
=> Loading section .dtors, size 0x8 lma ffffffff88011590
=> Loading section .rdata, size 0x227d lma ffffffff880115a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013820
=> Loading section .data, size 0x448 lma ffffffff88013838
=> Start address ffffffff88000004
=> Transfer rate: 648104 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[353/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:349 W:0 | mipstx39/jmr3904: sp15.exe
Result: invalid
Time: 0:00:00.320825 sp15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c50
=> Loading section .init, size 0x48 lma ffffffff88010cc0
=> Loading section .fini, size 0x30 lma ffffffff88010d08
=> Loading section .ctors, size 0x8 lma ffffffff88010d38
=> Loading section .dtors, size 0x8 lma ffffffff88010d40
=> Loading section .rdata, size 0x21fd lma ffffffff88010d50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f50
=> Loading section .data, size 0x448 lma ffffffff88012f68
=> Start address ffffffff88000004
=> Transfer rate: 630056 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[354/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:349 W:0 | mipstx39/jmr3904: sp16.exe
Result: invalid
Time: 0:00:00.268537 sp16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13b20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013b20
=> Loading section .init, size 0x48 lma ffffffff88013b90
=> Loading section .fini, size 0x30 lma ffffffff88013bd8
=> Loading section .ctors, size 0x8 lma ffffffff88013c08
=> Loading section .dtors, size 0x8 lma ffffffff88013c10
=> Loading section .rdata, size 0x2a99 lma ffffffff88013c20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880166c0
=> Loading section .data, size 0x448 lma ffffffff880166d8
=> Start address ffffffff88000004
=> Transfer rate: 743560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[355/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp17.exe
Result: invalid
Time: 0:00:00.265230 sp17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108f0
=> Loading section .init, size 0x48 lma ffffffff88010960
=> Loading section .fini, size 0x30 lma ffffffff880109a8
=> Loading section .ctors, size 0x8 lma ffffffff880109d8
=> Loading section .dtors, size 0x8 lma ffffffff880109e0
=> Loading section .rdata, size 0x1f99 lma ffffffff880109f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012990
=> Loading section .data, size 0x418 lma ffffffff880129a8
=> Start address ffffffff88000004
=> Transfer rate: 617864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[356/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp18.exe
Result: invalid
Time: 0:00:00.271899 sp18.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffe0
=> Loading section .init, size 0x48 lma ffffffff88010050
=> Loading section .fini, size 0x30 lma ffffffff88010098
=> Loading section .ctors, size 0x8 lma ffffffff880100c8
=> Loading section .dtors, size 0x8 lma ffffffff880100d0
=> Loading section .rdata, size 0x1ea5 lma ffffffff880100e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f88
=> Loading section .data, size 0x438 lma ffffffff88011fa0
=> Start address ffffffff88000004
=> Transfer rate: 597608 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[357/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp19.exe
Result: invalid
Time: 0:00:00.259551 sp19.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1d7b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801d7b0
=> Loading section .init, size 0x48 lma ffffffff8801d820
=> Loading section .fini, size 0x30 lma ffffffff8801d868
=> Loading section .ctors, size 0x8 lma ffffffff8801d898
=> Loading section .dtors, size 0x8 lma ffffffff8801d8a0
=> Loading section .rdata, size 0x3248 lma ffffffff8801d8b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020af8
=> Loading section .data, size 0x760 lma ffffffff88020b10
=> Start address ffffffff88000004
=> Transfer rate: 1086272 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[358/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp20.exe
Result: invalid
Time: 0:00:00.256303 sp20.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19e10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019e10
=> Loading section .init, size 0x48 lma ffffffff88019e80
=> Loading section .fini, size 0x30 lma ffffffff88019ec8
=> Loading section .ctors, size 0x8 lma ffffffff88019ef8
=> Loading section .dtors, size 0x8 lma ffffffff88019f00
=> Loading section .rdata, size 0x2678 lma ffffffff88019f10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c588
=> Loading section .data, size 0x5d0 lma ffffffff8801c5a0
=> Start address ffffffff88000004
=> Transfer rate: 940864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[359/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp2038.exe
Result: invalid
Time: 0:00:00.254335 sp2038.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x102f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880102f0
=> Loading section .init, size 0x48 lma ffffffff88010360
=> Loading section .fini, size 0x30 lma ffffffff880103a8
=> Loading section .ctors, size 0x8 lma ffffffff880103d8
=> Loading section .dtors, size 0x8 lma ffffffff880103e0
=> Loading section .rdata, size 0x1d65 lma ffffffff880103f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012158
=> Loading section .data, size 0x440 lma ffffffff88012170
=> Start address ffffffff88000004
=> Transfer rate: 601384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[360/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp21.exe
Result: invalid
Time: 0:00:00.262937 sp21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x148d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880148d0
=> Loading section .init, size 0x48 lma ffffffff88014940
=> Loading section .fini, size 0x30 lma ffffffff88014988
=> Loading section .ctors, size 0x8 lma ffffffff880149b8
=> Loading section .dtors, size 0x8 lma ffffffff880149c0
=> Loading section .rdata, size 0x2668 lma ffffffff880149d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017038
=> Loading section .data, size 0x470 lma ffffffff88017050
=> Start address ffffffff88000004
=> Transfer rate: 763328 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[361/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp22.exe
Result: invalid
Time: 0:00:00.262385 sp22.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12450 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012450
=> Loading section .init, size 0x48 lma ffffffff880124c0
=> Loading section .fini, size 0x30 lma ffffffff88012508
=> Loading section .ctors, size 0x8 lma ffffffff88012538
=> Loading section .dtors, size 0x8 lma ffffffff88012540
=> Loading section .rdata, size 0x2324 lma ffffffff88012550
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014878
=> Loading section .data, size 0x470 lma ffffffff88014890
=> Start address ffffffff88000004
=> Transfer rate: 681888 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[362/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:357 W:0 | mipstx39/jmr3904: sp23.exe
Result: invalid
Time: 0:00:00.254276 sp23.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010700
=> Loading section .fini, size 0x30 lma ffffffff88010748
=> Loading section .ctors, size 0x8 lma ffffffff88010778
=> Loading section .dtors, size 0x8 lma ffffffff88010780
=> Loading section .rdata, size 0x1f3d lma ffffffff88010790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126d0
=> Loading section .data, size 0x448 lma ffffffff880126e8
=> Start address ffffffff88000004
=> Transfer rate: 612648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[363/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp24.exe
Result: invalid
Time: 0:00:00.513127 sp24.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b60
=> Loading section .init, size 0x48 lma ffffffff88011bd0
=> Loading section .fini, size 0x30 lma ffffffff88011c18
=> Loading section .ctors, size 0x8 lma ffffffff88011c48
=> Loading section .dtors, size 0x8 lma ffffffff88011c50
=> Loading section .rdata, size 0x2094 lma ffffffff88011c60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013cf8
=> Loading section .data, size 0x5c0 lma ffffffff88013d10
=> Start address ffffffff88000004
=> Transfer rate: 661024 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[364/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp25.exe
Result: invalid
Time: 0:00:00.258050 sp25.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11d50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011d50
=> Loading section .init, size 0x48 lma ffffffff88011dc0
=> Loading section .fini, size 0x30 lma ffffffff88011e08
=> Loading section .ctors, size 0x8 lma ffffffff88011e38
=> Loading section .dtors, size 0x8 lma ffffffff88011e40
=> Loading section .rdata, size 0x232d lma ffffffff88011e50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014180
=> Loading section .data, size 0x448 lma ffffffff88014198
=> Start address ffffffff88000004
=> Transfer rate: 667304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[365/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp26.exe
Result: invalid
Time: 0:00:00.256660 sp26.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10540 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010540
=> Loading section .init, size 0x48 lma ffffffff880105b0
=> Loading section .fini, size 0x30 lma ffffffff880105f8
=> Loading section .ctors, size 0x8 lma ffffffff88010628
=> Loading section .dtors, size 0x8 lma ffffffff88010630
=> Loading section .rdata, size 0x1de1 lma ffffffff88010640
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012428
=> Loading section .data, size 0x418 lma ffffffff88012440
=> Start address ffffffff88000004
=> Transfer rate: 606792 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[366/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp27.exe
Result: invalid
Time: 0:00:00.286279 sp27.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110e0
=> Loading section .init, size 0x48 lma ffffffff88011150
=> Loading section .fini, size 0x30 lma ffffffff88011198
=> Loading section .ctors, size 0x8 lma ffffffff880111c8
=> Loading section .dtors, size 0x8 lma ffffffff880111d0
=> Loading section .rdata, size 0x1e91 lma ffffffff880111e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013078
=> Loading section .data, size 0x448 lma ffffffff88013090
=> Start address ffffffff88000004
=> Transfer rate: 632392 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[367/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp27a.exe
Result: invalid
Time: 0:00:00.255506 sp27a.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110e0
=> Loading section .init, size 0x48 lma ffffffff88011150
=> Loading section .fini, size 0x30 lma ffffffff88011198
=> Loading section .ctors, size 0x8 lma ffffffff880111c8
=> Loading section .dtors, size 0x8 lma ffffffff880111d0
=> Loading section .rdata, size 0x1ea1 lma ffffffff880111e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013088
=> Loading section .data, size 0x448 lma ffffffff880130a0
=> Start address ffffffff88000004
=> Transfer rate: 632520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[368/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp29.exe
Result: invalid
Time: 0:00:00.259882 sp29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11820 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011820
=> Loading section .init, size 0x48 lma ffffffff88011890
=> Loading section .fini, size 0x30 lma ffffffff880118d8
=> Loading section .ctors, size 0x8 lma ffffffff88011908
=> Loading section .dtors, size 0x8 lma ffffffff88011910
=> Loading section .rdata, size 0x20c9 lma ffffffff88011920
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139f0
=> Loading section .data, size 0x448 lma ffffffff88013a08
=> Start address ffffffff88000004
=> Transfer rate: 651784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[369/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:360 W:0 | mipstx39/jmr3904: sp30.exe
Result: invalid
Time: 0:00:00.262384 sp30.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12350 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012350
=> Loading section .init, size 0x48 lma ffffffff880123c0
=> Loading section .fini, size 0x30 lma ffffffff88012408
=> Loading section .ctors, size 0x8 lma ffffffff88012438
=> Loading section .dtors, size 0x8 lma ffffffff88012440
=> Loading section .rdata, size 0x2190 lma ffffffff88012450
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880145e0
=> Loading section .data, size 0x5c0 lma ffffffff880145f8
=> Start address ffffffff88000004
=> Transfer rate: 679296 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[370/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:366 W:0 | mipstx39/jmr3904: sp31.exe
Result: invalid
Time: 0:00:00.258040 sp31.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014840
=> Loading section .init, size 0x48 lma ffffffff880148b0
=> Loading section .fini, size 0x30 lma ffffffff880148f8
=> Loading section .ctors, size 0x8 lma ffffffff88014928
=> Loading section .dtors, size 0x8 lma ffffffff88014930
=> Loading section .rdata, size 0x2694 lma ffffffff88014940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016fd8
=> Loading section .data, size 0x470 lma ffffffff88016ff0
=> Start address ffffffff88000004
=> Transfer rate: 762528 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[371/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:368 W:0 | mipstx39/jmr3904: sp32.exe
Result: invalid
Time: 0:00:00.263525 sp32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b80
=> Loading section .init, size 0x48 lma ffffffff88010bf0
=> Loading section .fini, size 0x30 lma ffffffff88010c38
=> Loading section .ctors, size 0x8 lma ffffffff88010c68
=> Loading section .dtors, size 0x8 lma ffffffff88010c70
=> Loading section .rdata, size 0x1e39 lma ffffffff88010c80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ac0
=> Loading section .data, size 0x448 lma ffffffff88012ad8
=> Start address ffffffff88000004
=> Transfer rate: 620680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[372/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:368 W:0 | mipstx39/jmr3904: sp33.exe
Result: invalid
Time: 0:00:00.252004 sp33.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11540 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011540
=> Loading section .init, size 0x48 lma ffffffff880115b0
=> Loading section .fini, size 0x30 lma ffffffff880115f8
=> Loading section .ctors, size 0x8 lma ffffffff88011628
=> Loading section .dtors, size 0x8 lma ffffffff88011630
=> Loading section .rdata, size 0x23c5 lma ffffffff88011640
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a08
=> Loading section .data, size 0x448 lma ffffffff88013a20
=> Start address ffffffff88000004
=> Transfer rate: 652008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[373/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:368 W:0 | mipstx39/jmr3904: sp34.exe
Result: invalid
Time: 0:00:00.291604 sp34.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11880 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011880
=> Loading section .init, size 0x48 lma ffffffff880118f0
=> Loading section .fini, size 0x30 lma ffffffff88011938
=> Loading section .ctors, size 0x8 lma ffffffff88011968
=> Loading section .dtors, size 0x8 lma ffffffff88011970
=> Loading section .rdata, size 0x1f39 lma ffffffff88011980
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138c0
=> Loading section .data, size 0x448 lma ffffffff880138d8
=> Start address ffffffff88000004
=> Transfer rate: 649352 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[374/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:368 W:0 | mipstx39/jmr3904: sp35.exe
Result: invalid
Time: 0:00:00.269075 sp35.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17e60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017e60
=> Loading section .init, size 0x48 lma ffffffff88017ed0
=> Loading section .fini, size 0x30 lma ffffffff88017f18
=> Loading section .ctors, size 0x8 lma ffffffff88017f48
=> Loading section .dtors, size 0x8 lma ffffffff88017f50
=> Loading section .rdata, size 0x27a8 lma ffffffff88017f60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a708
=> Loading section .data, size 0x5b4 lma ffffffff8801a720
=> Start address ffffffff88000004
=> Transfer rate: 878176 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[375/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:368 W:0 | mipstx39/jmr3904: sp37.exe
Result: invalid
Time: 0:00:00.280346 sp37.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012ef0
=> Loading section .init, size 0x48 lma ffffffff88012f60
=> Loading section .fini, size 0x30 lma ffffffff88012fa8
=> Loading section .ctors, size 0x8 lma ffffffff88012fd8
=> Loading section .dtors, size 0x8 lma ffffffff88012fe0
=> Loading section .rdata, size 0x2789 lma ffffffff88012ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015780
=> Loading section .data, size 0x470 lma ffffffff88015798
=> Start address ffffffff88000004
=> Transfer rate: 712648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[376/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:368 W:0 | mipstx39/jmr3904: sp38.exe
Result: invalid
Time: 0:00:00.271752 sp38.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010700
=> Loading section .init, size 0x48 lma ffffffff88010770
=> Loading section .fini, size 0x30 lma ffffffff880107b8
=> Loading section .ctors, size 0x8 lma ffffffff880107e8
=> Loading section .dtors, size 0x8 lma ffffffff880107f0
=> Loading section .rdata, size 0x1e45 lma ffffffff88010800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012648
=> Loading section .data, size 0x448 lma ffffffff88012660
=> Start address ffffffff88000004
=> Transfer rate: 611560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[377/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:369 W:0 | mipstx39/jmr3904: sp40.exe
Result: invalid
Time: 0:00:00.261239 sp40.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10850 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010850
=> Loading section .init, size 0x48 lma ffffffff880108c0
=> Loading section .fini, size 0x30 lma ffffffff88010908
=> Loading section .ctors, size 0x8 lma ffffffff88010938
=> Loading section .dtors, size 0x8 lma ffffffff88010940
=> Loading section .rdata, size 0x20a5 lma ffffffff88010950
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129f8
=> Loading section .data, size 0x460 lma ffffffff88012a10
=> Start address ffffffff88000004
=> Transfer rate: 619304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[378/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:370 W:0 | mipstx39/jmr3904: sp41.exe
Result: invalid
Time: 0:00:00.254040 sp41.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe50
=> Loading section .init, size 0x48 lma ffffffff8800fec0
=> Loading section .fini, size 0x30 lma ffffffff8800ff08
=> Loading section .ctors, size 0x8 lma ffffffff8800ff38
=> Loading section .dtors, size 0x8 lma ffffffff8800ff40
=> Loading section .rdata, size 0x1aad lma ffffffff8800ff50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a00
=> Loading section .data, size 0x418 lma ffffffff88011a18
=> Start address ffffffff88000004
=> Transfer rate: 586024 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[379/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:370 W:0 | mipstx39/jmr3904: sp42.exe
Result: invalid
Time: 0:00:00.252258 sp42.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012960
=> Loading section .init, size 0x48 lma ffffffff880129d0
=> Loading section .fini, size 0x30 lma ffffffff88012a18
=> Loading section .ctors, size 0x8 lma ffffffff88012a48
=> Loading section .dtors, size 0x8 lma ffffffff88012a50
=> Loading section .rdata, size 0x22a4 lma ffffffff88012a60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d08
=> Loading section .data, size 0x598 lma ffffffff88014d20
=> Start address ffffffff88000004
=> Transfer rate: 693600 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[380/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp43.exe
Result: invalid
Time: 0:00:00.253997 sp43.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x128d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880128d0
=> Loading section .init, size 0x48 lma ffffffff88012940
=> Loading section .fini, size 0x30 lma ffffffff88012988
=> Loading section .ctors, size 0x8 lma ffffffff880129b8
=> Loading section .dtors, size 0x8 lma ffffffff880129c0
=> Loading section .rdata, size 0x2f78 lma ffffffff880129d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015948
=> Loading section .data, size 0x478 lma ffffffff88015960
=> Start address ffffffff88000004
=> Transfer rate: 716416 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[381/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp44.exe
Result: invalid
Time: 0:00:00.276736 sp44.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10590 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010590
=> Loading section .init, size 0x48 lma ffffffff88010600
=> Loading section .fini, size 0x30 lma ffffffff88010648
=> Loading section .ctors, size 0x8 lma ffffffff88010678
=> Loading section .dtors, size 0x8 lma ffffffff88010680
=> Loading section .rdata, size 0x1e19 lma ffffffff88010690
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124b0
=> Loading section .data, size 0x418 lma ffffffff880124c8
=> Start address ffffffff88000004
=> Transfer rate: 607880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[382/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp45.exe
Result: invalid
Time: 0:00:00.259791 sp45.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10bb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010bb0
=> Loading section .init, size 0x48 lma ffffffff88010c20
=> Loading section .fini, size 0x30 lma ffffffff88010c68
=> Loading section .ctors, size 0x8 lma ffffffff88010c98
=> Loading section .dtors, size 0x8 lma ffffffff88010ca0
=> Loading section .rdata, size 0x1fad lma ffffffff88010cb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c60
=> Loading section .data, size 0x448 lma ffffffff88012c78
=> Start address ffffffff88000004
=> Transfer rate: 624040 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[383/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp46.exe
Result: invalid
Time: 0:00:00.259542 sp46.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c70
=> Loading section .init, size 0x48 lma ffffffff88010ce0
=> Loading section .fini, size 0x30 lma ffffffff88010d28
=> Loading section .ctors, size 0x8 lma ffffffff88010d58
=> Loading section .dtors, size 0x8 lma ffffffff88010d60
=> Loading section .rdata, size 0x1e5d lma ffffffff88010d70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012bd0
=> Loading section .data, size 0x448 lma ffffffff88012be8
=> Start address ffffffff88000004
=> Transfer rate: 622888 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[384/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp47.exe
Result: invalid
Time: 0:00:00.329177 sp47.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x101e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880101e0
=> Loading section .init, size 0x48 lma ffffffff88010250
=> Loading section .fini, size 0x30 lma ffffffff88010298
=> Loading section .ctors, size 0x8 lma ffffffff880102c8
=> Loading section .dtors, size 0x8 lma ffffffff880102d0
=> Loading section .rdata, size 0x19f9 lma ffffffff880102e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ce0
=> Loading section .data, size 0x418 lma ffffffff88011cf8
=> Start address ffffffff88000004
=> Transfer rate: 591880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[385/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp48.exe
Result: invalid
Time: 0:00:00.258222 sp48.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x102c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880102c0
=> Loading section .init, size 0x48 lma ffffffff88010330
=> Loading section .fini, size 0x30 lma ffffffff88010378
=> Loading section .ctors, size 0x8 lma ffffffff880103a8
=> Loading section .dtors, size 0x8 lma ffffffff880103b0
=> Loading section .rdata, size 0x1ea8 lma ffffffff880103c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012268
=> Loading section .data, size 0x438 lma ffffffff88012280
=> Start address ffffffff88000004
=> Transfer rate: 603520 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[386/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp49.exe
Result: invalid
Time: 0:00:00.254931 sp49.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfa60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fa60
=> Loading section .init, size 0x48 lma ffffffff8800fad0
=> Loading section .fini, size 0x30 lma ffffffff8800fb18
=> Loading section .ctors, size 0x8 lma ffffffff8800fb48
=> Loading section .dtors, size 0x8 lma ffffffff8800fb50
=> Loading section .rdata, size 0x1e25 lma ffffffff8800fb60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011988
=> Loading section .data, size 0x438 lma ffffffff880119a0
=> Start address ffffffff88000004
=> Transfer rate: 585320 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[387/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:378 W:0 | mipstx39/jmr3904: sp50.exe
Result: invalid
Time: 0:00:00.254243 sp50.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b00
=> Loading section .init, size 0x48 lma ffffffff88010b70
=> Loading section .fini, size 0x30 lma ffffffff88010bb8
=> Loading section .ctors, size 0x8 lma ffffffff88010be8
=> Loading section .dtors, size 0x8 lma ffffffff88010bf0
=> Loading section .rdata, size 0x1df9 lma ffffffff88010c00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a00
=> Loading section .data, size 0x448 lma ffffffff88012a18
=> Start address ffffffff88000004
=> Transfer rate: 619144 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[388/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp51.exe
Result: invalid
Time: 0:00:00.254298 sp51.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c10
=> Loading section .init, size 0x48 lma ffffffff88010c80
=> Loading section .fini, size 0x30 lma ffffffff88010cc8
=> Loading section .ctors, size 0x8 lma ffffffff88010cf8
=> Loading section .dtors, size 0x8 lma ffffffff88010d00
=> Loading section .rdata, size 0x1f3d lma ffffffff88010d10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c50
=> Loading section .data, size 0x438 lma ffffffff88012c68
=> Start address ffffffff88000004
=> Transfer rate: 623784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[389/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:384 W:0 | mipstx39/jmr3904: sp52.exe
Result: invalid
Time: 0:00:00.257104 sp52.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11280 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011280
=> Loading section .init, size 0x48 lma ffffffff880112f0
=> Loading section .fini, size 0x30 lma ffffffff88011338
=> Loading section .ctors, size 0x8 lma ffffffff88011368
=> Loading section .dtors, size 0x8 lma ffffffff88011370
=> Loading section .rdata, size 0x1f39 lma ffffffff88011380
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880132c0
=> Loading section .data, size 0x470 lma ffffffff880132d8
=> Start address ffffffff88000004
=> Transfer rate: 637384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[390/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:385 W:0 | mipstx39/jmr3904: sp53.exe
Result: invalid
Time: 0:00:00.254412 sp53.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11930 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011930
=> Loading section .init, size 0x48 lma ffffffff880119a0
=> Loading section .fini, size 0x30 lma ffffffff880119e8
=> Loading section .ctors, size 0x8 lma ffffffff88011a18
=> Loading section .dtors, size 0x8 lma ffffffff88011a20
=> Loading section .rdata, size 0x1f61 lma ffffffff88011a30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013998
=> Loading section .data, size 0x470 lma ffffffff880139b0
=> Start address ffffffff88000004
=> Transfer rate: 651400 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[391/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:386 W:0 | mipstx39/jmr3904: sp54.exe
Result: invalid
Time: 0:00:00.257136 sp54.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf080 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f080
=> Loading section .init, size 0x48 lma ffffffff8800f0f0
=> Loading section .fini, size 0x30 lma ffffffff8800f138
=> Loading section .ctors, size 0x8 lma ffffffff8800f168
=> Loading section .dtors, size 0x8 lma ffffffff8800f170
=> Loading section .rdata, size 0x1e3c lma ffffffff8800f180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010fc0
=> Loading section .data, size 0x548 lma ffffffff88010fd8
=> Start address ffffffff88000004
=> Transfer rate: 567456 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[392/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:386 W:0 | mipstx39/jmr3904: sp55.exe
Result: invalid
Time: 0:00:00.264409 sp55.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10300 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010300
=> Loading section .init, size 0x48 lma ffffffff88010370
=> Loading section .fini, size 0x30 lma ffffffff880103b8
=> Loading section .ctors, size 0x8 lma ffffffff880103e8
=> Loading section .dtors, size 0x8 lma ffffffff880103f0
=> Loading section .rdata, size 0x1f05 lma ffffffff88010400
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012308
=> Loading section .data, size 0x438 lma ffffffff88012320
=> Start address ffffffff88000004
=> Transfer rate: 604776 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[393/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:385 W:0 | mipstx39/jmr3904: sp56.exe
Result: invalid
Time: 0:00:00.303454 sp56.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf570 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f570
=> Loading section .init, size 0x48 lma ffffffff8800f5e0
=> Loading section .fini, size 0x30 lma ffffffff8800f628
=> Loading section .ctors, size 0x8 lma ffffffff8800f658
=> Loading section .dtors, size 0x8 lma ffffffff8800f660
=> Loading section .rdata, size 0x1e39 lma ffffffff8800f670
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880114b0
=> Loading section .data, size 0x458 lma ffffffff880114c8
=> Start address ffffffff88000004
=> Transfer rate: 575624 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[394/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:388 W:0 | mipstx39/jmr3904: sp57.exe
Result: invalid
Time: 0:00:00.252196 sp57.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103f0
=> Loading section .init, size 0x48 lma ffffffff88010460
=> Loading section .fini, size 0x30 lma ffffffff880104a8
=> Loading section .ctors, size 0x8 lma ffffffff880104d8
=> Loading section .dtors, size 0x8 lma ffffffff880104e0
=> Loading section .rdata, size 0x1edd lma ffffffff880104f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123d0
=> Loading section .data, size 0x418 lma ffffffff880123e8
=> Start address ffffffff88000004
=> Transfer rate: 606120 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[395/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:387 W:0 | mipstx39/jmr3904: sp58.exe
Result: invalid
Time: 0:00:00.252004 sp58.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf310 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f310
=> Loading section .init, size 0x48 lma ffffffff8800f380
=> Loading section .fini, size 0x30 lma ffffffff8800f3c8
=> Loading section .ctors, size 0x8 lma ffffffff8800f3f8
=> Loading section .dtors, size 0x8 lma ffffffff8800f400
=> Loading section .rdata, size 0x1a31 lma ffffffff8800f410
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010e48
=> Loading section .data, size 0x408 lma ffffffff88010e60
=> Start address ffffffff88000004
=> Transfer rate: 561864 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[396/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:388 W:0 | mipstx39/jmr3904: sp59.exe
Result: invalid
Time: 0:00:00.251460 sp59.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e50
=> Loading section .init, size 0x48 lma ffffffff88010ec0
=> Loading section .fini, size 0x30 lma ffffffff88010f08
=> Loading section .ctors, size 0x8 lma ffffffff88010f38
=> Loading section .dtors, size 0x8 lma ffffffff88010f40
=> Loading section .rdata, size 0x2039 lma ffffffff88010f50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f90
=> Loading section .data, size 0x448 lma ffffffff88012fa8
=> Start address ffffffff88000004
=> Transfer rate: 630536 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[397/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:388 W:0 | mipstx39/jmr3904: sp60.exe
Result: invalid
Time: 0:00:00.253160 sp60.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010900
=> Loading section .init, size 0x48 lma ffffffff88010970
=> Loading section .fini, size 0x30 lma ffffffff880109b8
=> Loading section .ctors, size 0x8 lma ffffffff880109e8
=> Loading section .dtors, size 0x8 lma ffffffff880109f0
=> Loading section .rdata, size 0x1f1d lma ffffffff88010a00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012920
=> Loading section .data, size 0x448 lma ffffffff88012938
=> Start address ffffffff88000004
=> Transfer rate: 617384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[398/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp62.exe
Result: invalid
Time: 0:00:00.262020 sp62.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11a60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011a60
=> Loading section .init, size 0x48 lma ffffffff88011ad0
=> Loading section .fini, size 0x30 lma ffffffff88011b18
=> Loading section .ctors, size 0x8 lma ffffffff88011b48
=> Loading section .dtors, size 0x8 lma ffffffff88011b50
=> Loading section .rdata, size 0x2030 lma ffffffff88011b60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b90
=> Loading section .data, size 0x454 lma ffffffff88013ba8
=> Start address ffffffff88000004
=> Transfer rate: 655264 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[399/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:392 W:0 | mipstx39/jmr3904: sp63.exe
Result: invalid
Time: 0:00:00.262761 sp63.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f510
=> Loading section .init, size 0x48 lma ffffffff8800f580
=> Loading section .fini, size 0x30 lma ffffffff8800f5c8
=> Loading section .ctors, size 0x8 lma ffffffff8800f5f8
=> Loading section .dtors, size 0x8 lma ffffffff8800f600
=> Loading section .rdata, size 0x1af1 lma ffffffff8800f610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011108
=> Loading section .data, size 0x408 lma ffffffff88011120
=> Start address ffffffff88000004
=> Transfer rate: 567496 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[400/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:392 W:0 | mipstx39/jmr3904: sp64.exe
Result: invalid
Time: 0:00:00.293550 sp64.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107b0
=> Loading section .init, size 0x48 lma ffffffff88010820
=> Loading section .fini, size 0x30 lma ffffffff88010868
=> Loading section .ctors, size 0x8 lma ffffffff88010898
=> Loading section .dtors, size 0x8 lma ffffffff880108a0
=> Loading section .rdata, size 0x1b39 lma ffffffff880108b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123f0
=> Loading section .data, size 0x468 lma ffffffff88012408
=> Start address ffffffff88000004
=> Transfer rate: 606984 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[401/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:392 W:0 | mipstx39/jmr3904: sp65.exe
Result: invalid
Time: 0:00:00.251939 sp65.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x121d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880121d0
=> Loading section .init, size 0x48 lma ffffffff88012240
=> Loading section .fini, size 0x30 lma ffffffff88012288
=> Loading section .ctors, size 0x8 lma ffffffff880122b8
=> Loading section .dtors, size 0x8 lma ffffffff880122c0
=> Loading section .rdata, size 0x1f08 lma ffffffff880122d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141d8
=> Loading section .data, size 0x454 lma ffffffff880141f0
=> Start address ffffffff88000004
=> Transfer rate: 668128 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[402/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp66.exe
Result: invalid
Time: 0:00:00.254905 sp66.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x121e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880121e0
=> Loading section .init, size 0x48 lma ffffffff88012250
=> Loading section .fini, size 0x30 lma ffffffff88012298
=> Loading section .ctors, size 0x8 lma ffffffff880122c8
=> Loading section .dtors, size 0x8 lma ffffffff880122d0
=> Loading section .rdata, size 0x1f10 lma ffffffff880122e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141f0
=> Loading section .data, size 0x454 lma ffffffff88014208
=> Start address ffffffff88000004
=> Transfer rate: 668320 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[403/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp67.exe
Result: invalid
Time: 0:00:00.284672 sp67.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010960
=> Loading section .init, size 0x48 lma ffffffff880109d0
=> Loading section .fini, size 0x30 lma ffffffff88010a18
=> Loading section .ctors, size 0x8 lma ffffffff88010a48
=> Loading section .dtors, size 0x8 lma ffffffff88010a50
=> Loading section .rdata, size 0x1ecd lma ffffffff88010a60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012930
=> Loading section .data, size 0x448 lma ffffffff88012948
=> Start address ffffffff88000004
=> Transfer rate: 617512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[404/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp68.exe
Result: invalid
Time: 0:00:00.299690 sp68.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013f50
=> Loading section .init, size 0x48 lma ffffffff88013fd0
=> Loading section .fini, size 0x30 lma ffffffff88014018
=> Loading section .ctors, size 0x8 lma ffffffff88014048
=> Loading section .dtors, size 0x8 lma ffffffff88014050
=> Loading section .rdata, size 0x2295 lma ffffffff88014060
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880162f8
=> Loading section .data, size 0x508 lma ffffffff88016310
=> Start address ffffffff88000004
=> Transfer rate: 737384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[405/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp69.exe
Result: invalid
Time: 0:00:00.257840 sp69.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11280 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011280
=> Loading section .init, size 0x48 lma ffffffff880112f0
=> Loading section .fini, size 0x30 lma ffffffff88011338
=> Loading section .ctors, size 0x8 lma ffffffff88011368
=> Loading section .dtors, size 0x8 lma ffffffff88011370
=> Loading section .rdata, size 0x2265 lma ffffffff88011380
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135e8
=> Loading section .data, size 0x448 lma ffffffff88013600
=> Start address ffffffff88000004
=> Transfer rate: 643560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[406/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp70.exe
Result: invalid
Time: 0:00:00.279798 sp70.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10930 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010930
=> Loading section .init, size 0x48 lma ffffffff880109a0
=> Loading section .fini, size 0x30 lma ffffffff880109e8
=> Loading section .ctors, size 0x8 lma ffffffff88010a18
=> Loading section .dtors, size 0x8 lma ffffffff88010a20
=> Loading section .rdata, size 0x1dcc lma ffffffff88010a30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012800
=> Loading section .data, size 0x418 lma ffffffff88012818
=> Start address ffffffff88000004
=> Transfer rate: 614688 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[407/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:400 W:0 | mipstx39/jmr3904: sp71.exe
Result: invalid
Time: 0:00:00.262033 sp71.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf820 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f820
=> Loading section .init, size 0x48 lma ffffffff8800f890
=> Loading section .fini, size 0x30 lma ffffffff8800f8d8
=> Loading section .ctors, size 0x8 lma ffffffff8800f908
=> Loading section .dtors, size 0x8 lma ffffffff8800f910
=> Loading section .rdata, size 0x1ddc lma ffffffff8800f920
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011700
=> Loading section .data, size 0x438 lma ffffffff88011718
=> Start address ffffffff88000004
=> Transfer rate: 580128 bits/sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[408/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp72.exe
Result: invalid
Time: 0:00:00.260714 sp72.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x111c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880111c0
=> Loading section .init, size 0x48 lma ffffffff88011230
=> Loading section .fini, size 0x30 lma ffffffff88011278
=> Loading section .ctors, size 0x8 lma ffffffff880112a8
=> Loading section .dtors, size 0x8 lma ffffffff880112b0
=> Loading section .rdata, size 0x1eb1 lma ffffffff880112c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013178
=> Loading section .data, size 0x448 lma ffffffff88013190
=> Start address ffffffff88000004
=> Transfer rate: 634440 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[409/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:400 W:0 | mipstx39/jmr3904: sp73.exe
Result: invalid
Time: 0:00:00.264427 sp73.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x112b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880112b0
=> Loading section .init, size 0x48 lma ffffffff88011320
=> Loading section .fini, size 0x30 lma ffffffff88011368
=> Loading section .ctors, size 0x8 lma ffffffff88011398
=> Loading section .dtors, size 0x8 lma ffffffff880113a0
=> Loading section .rdata, size 0x1fcc lma ffffffff880113b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013380
=> Loading section .data, size 0x440 lma ffffffff88013398
=> Start address ffffffff88000004
=> Transfer rate: 638560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[410/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: sp74.exe
Result: invalid
Time: 0:00:00.253570 sp74.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf270 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f270
=> Loading section .init, size 0x48 lma ffffffff8800f2e0
=> Loading section .fini, size 0x30 lma ffffffff8800f328
=> Loading section .ctors, size 0x8 lma ffffffff8800f358
=> Loading section .dtors, size 0x8 lma ffffffff8800f360
=> Loading section .rdata, size 0x1e09 lma ffffffff8800f370
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011180
=> Loading section .data, size 0x408 lma ffffffff88011198
=> Start address ffffffff88000004
=> Transfer rate: 568456 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[411/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: sp75.exe
Result: invalid
Time: 0:00:00.261322 sp75.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a90
=> Loading section .init, size 0x48 lma ffffffff88010b00
=> Loading section .fini, size 0x30 lma ffffffff88010b48
=> Loading section .ctors, size 0x8 lma ffffffff88010b78
=> Loading section .dtors, size 0x8 lma ffffffff88010b80
=> Loading section .rdata, size 0x1e09 lma ffffffff88010b90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129a0
=> Loading section .data, size 0x448 lma ffffffff880129b8
=> Start address ffffffff88000004
=> Transfer rate: 618376 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[412/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:408 W:0 | mipstx39/jmr3904: sp76.exe
Result: invalid
Time: 0:00:00.265206 sp76.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfba0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fba0
=> Loading section .init, size 0x48 lma ffffffff8800fc10
=> Loading section .fini, size 0x30 lma ffffffff8800fc58
=> Loading section .ctors, size 0x8 lma ffffffff8800fc88
=> Loading section .dtors, size 0x8 lma ffffffff8800fc90
=> Loading section .rdata, size 0x1fc0 lma ffffffff8800fca0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c60
=> Loading section .data, size 0x408 lma ffffffff88011c78
=> Start address ffffffff88000004
=> Transfer rate: 590784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[413/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:408 W:0 | mipstx39/jmr3904: sp77.exe
Result: invalid
Time: 0:00:00.257391 sp77.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1d05 lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012208
=> Loading section .data, size 0x448 lma ffffffff88012220
=> Start address ffffffff88000004
=> Transfer rate: 602856 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[414/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:408 W:0 | mipstx39/jmr3904: spassoc01.exe
Result: invalid
Time: 0:00:00.251414 spassoc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10cc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010cc0
=> Loading section .init, size 0x48 lma ffffffff88010d30
=> Loading section .fini, size 0x30 lma ffffffff88010d78
=> Loading section .ctors, size 0x8 lma ffffffff88010da8
=> Loading section .dtors, size 0x8 lma ffffffff88010db0
=> Loading section .rdata, size 0x21a1 lma ffffffff88010dc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f68
=> Loading section .data, size 0x440 lma ffffffff88012f80
=> Start address ffffffff88000004
=> Transfer rate: 630152 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[415/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:408 W:0 | mipstx39/jmr3904: spatomic01.exe
Result: invalid
Time: 0:00:00.271669 spatomic01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfc70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fc70
=> Loading section .init, size 0x48 lma ffffffff8800fce0
=> Loading section .fini, size 0x30 lma ffffffff8800fd28
=> Loading section .ctors, size 0x8 lma ffffffff8800fd58
=> Loading section .dtors, size 0x8 lma ffffffff8800fd60
=> Loading section .rdata, size 0x1cfd lma ffffffff8800fd70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a70
=> Loading section .data, size 0x410 lma ffffffff88011a88
=> Start address ffffffff88000004
=> Transfer rate: 586856 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[416/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:408 W:0 | mipstx39/jmr3904: spcache01.exe
Result: invalid
Time: 0:00:00.255633 spcache01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880120a0
=> Loading section .init, size 0x48 lma ffffffff88012110
=> Loading section .fini, size 0x30 lma ffffffff88012158
=> Loading section .ctors, size 0x8 lma ffffffff88012188
=> Loading section .dtors, size 0x8 lma ffffffff88012190
=> Loading section .rdata, size 0x213d lma ffffffff880121a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142e0
=> Loading section .data, size 0x418 lma ffffffff880142f8
=> Start address ffffffff88000004
=> Transfer rate: 669736 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[417/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:408 W:0 | mipstx39/jmr3904: spcbssched01.exe
Result: invalid
Time: 0:00:00.299360 spcbssched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11810 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011810
=> Loading section .init, size 0x48 lma ffffffff88011880
=> Loading section .fini, size 0x30 lma ffffffff880118c8
=> Loading section .ctors, size 0x8 lma ffffffff880118f8
=> Loading section .dtors, size 0x8 lma ffffffff88011900
=> Loading section .rdata, size 0x20a0 lma ffffffff88011910
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139b0
=> Loading section .data, size 0x5c0 lma ffffffff880139c8
=> Start address ffffffff88000004
=> Transfer rate: 654336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[418/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:414 W:0 | mipstx39/jmr3904: spcbssched02.exe
Result: invalid
Time: 0:00:00.254222 spcbssched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013210
=> Loading section .init, size 0x48 lma ffffffff88013280
=> Loading section .fini, size 0x30 lma ffffffff880132c8
=> Loading section .ctors, size 0x8 lma ffffffff880132f8
=> Loading section .dtors, size 0x8 lma ffffffff88013300
=> Loading section .rdata, size 0x267d lma ffffffff88013310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015990
=> Loading section .data, size 0x458 lma ffffffff880159a8
=> Start address ffffffff88000004
=> Transfer rate: 716712 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[419/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spcbssched03.exe
Result: invalid
Time: 0:00:00.260667 spcbssched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12cb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012cb0
=> Loading section .init, size 0x48 lma ffffffff88012d20
=> Loading section .fini, size 0x30 lma ffffffff88012d68
=> Loading section .ctors, size 0x8 lma ffffffff88012d98
=> Loading section .dtors, size 0x8 lma ffffffff88012da0
=> Loading section .rdata, size 0x21cc lma ffffffff88012db0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014f80
=> Loading section .data, size 0x4c0 lma ffffffff88014f98
=> Start address ffffffff88000004
=> Transfer rate: 696928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[420/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:416 W:0 | mipstx39/jmr3904: spchain.exe
Result: invalid
Time: 0:00:00.262316 spchain.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x115c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880115c0
=> Loading section .init, size 0x48 lma ffffffff88011630
=> Loading section .fini, size 0x30 lma ffffffff88011678
=> Loading section .ctors, size 0x8 lma ffffffff880116a8
=> Loading section .dtors, size 0x8 lma ffffffff880116b0
=> Loading section .rdata, size 0x213d lma ffffffff880116c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013800
=> Loading section .data, size 0x438 lma ffffffff88013818
=> Start address ffffffff88000004
=> Transfer rate: 647720 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[421/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:416 W:0 | mipstx39/jmr3904: spclock_err01.exe
Result: invalid
Time: 0:00:00.285140 spclock_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b80
=> Loading section .init, size 0x48 lma ffffffff88011bf0
=> Loading section .fini, size 0x30 lma ffffffff88011c38
=> Loading section .ctors, size 0x8 lma ffffffff88011c68
=> Loading section .dtors, size 0x8 lma ffffffff88011c70
=> Loading section .rdata, size 0x2425 lma ffffffff88011c80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140a8
=> Loading section .data, size 0x440 lma ffffffff880140c0
=> Start address ffffffff88000004
=> Transfer rate: 665512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[422/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spclock_err02.exe
Result: invalid
Time: 0:00:00.270510 spclock_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x116b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880116b0
=> Loading section .init, size 0x48 lma ffffffff88011720
=> Loading section .fini, size 0x30 lma ffffffff88011768
=> Loading section .ctors, size 0x8 lma ffffffff88011798
=> Loading section .dtors, size 0x8 lma ffffffff880117a0
=> Loading section .rdata, size 0x20b1 lma ffffffff880117b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013868
=> Loading section .data, size 0x440 lma ffffffff88013880
=> Start address ffffffff88000004
=> Transfer rate: 648584 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[423/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:416 W:0 | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid
Time: 0:00:00.279073 spclock_todhook01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15d60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015d60
=> Loading section .init, size 0x48 lma ffffffff88015dd0
=> Loading section .fini, size 0x30 lma ffffffff88015e18
=> Loading section .ctors, size 0x8 lma ffffffff88015e48
=> Loading section .dtors, size 0x8 lma ffffffff88015e50
=> Loading section .rdata, size 0x2614 lma ffffffff88015e60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018478
=> Loading section .data, size 0x7a0 lma ffffffff88018490
=> Start address ffffffff88000004
=> Transfer rate: 811296 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[424/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spconfig01.exe
Result: invalid
Time: 0:00:00.256367 spconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xee90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ee90
=> Loading section .init, size 0x48 lma ffffffff8800ef00
=> Loading section .fini, size 0x30 lma ffffffff8800ef48
=> Loading section .ctors, size 0x8 lma ffffffff8800ef78
=> Loading section .dtors, size 0x8 lma ffffffff8800ef80
=> Loading section .rdata, size 0x1a01 lma ffffffff8800ef90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010998
=> Loading section .data, size 0x49c lma ffffffff880109b0
=> Start address ffffffff88000004
=> Transfer rate: 553448 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[425/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:418 W:0 | mipstx39/jmr3904: spconfig02.exe
Result: invalid
Time: 0:00:00.254000 spconfig02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xbfb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800bfb0
=> Loading section .init, size 0x48 lma ffffffff8800c030
=> Loading section .fini, size 0x30 lma ffffffff8800c078
=> Loading section .ctors, size 0x8 lma ffffffff8800c0a8
=> Loading section .dtors, size 0x8 lma ffffffff8800c0b0
=> Loading section .rdata, size 0x15b0 lma ffffffff8800c0c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d670
=> Loading section .data, size 0x334 lma ffffffff8800d688
=> Start address ffffffff88000004
=> Transfer rate: 445856 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[426/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:418 W:0 | mipstx39/jmr3904: spconsole01.exe
Result: invalid
Time: 0:00:00.256195 spconsole01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801e650
=> Loading section .init, size 0x48 lma ffffffff8801e6c0
=> Loading section .fini, size 0x30 lma ffffffff8801e708
=> Loading section .ctors, size 0x8 lma ffffffff8801e738
=> Loading section .dtors, size 0x8 lma ffffffff8801e740
=> Loading section .rdata, size 0x240c lma ffffffff8801e750
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020b60
=> Loading section .data, size 0x5ec lma ffffffff88020b78
=> Start address ffffffff88000004
=> Transfer rate: 1084096 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[427/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spcontext01.exe
Result: invalid
Time: 0:00:00.257804 spcontext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110b0
=> Loading section .init, size 0x48 lma ffffffff88011120
=> Loading section .fini, size 0x30 lma ffffffff88011168
=> Loading section .ctors, size 0x8 lma ffffffff88011198
=> Loading section .dtors, size 0x8 lma ffffffff880111a0
=> Loading section .rdata, size 0x1a35 lma ffffffff880111b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012be8
=> Loading section .data, size 0x448 lma ffffffff88012c00
=> Start address ffffffff88000004
=> Transfer rate: 623080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[428/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid
Time: 0:00:00.251166 spcpucounter01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18920 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88018920
=> Loading section .init, size 0x48 lma ffffffff88018990
=> Loading section .fini, size 0x30 lma ffffffff880189d8
=> Loading section .ctors, size 0x8 lma ffffffff88018a08
=> Loading section .dtors, size 0x8 lma ffffffff88018a10
=> Loading section .rdata, size 0x2288 lma ffffffff88018a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aca8
=> Loading section .data, size 0x5b8 lma ffffffff8801acc0
=> Start address ffffffff88000004
=> Transfer rate: 889728 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[429/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spcpuset01.exe
Result: invalid
Time: 0:00:00.258942 spcpuset01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf790 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f790
=> Loading section .init, size 0x48 lma ffffffff8800f800
=> Loading section .fini, size 0x30 lma ffffffff8800f848
=> Loading section .ctors, size 0x8 lma ffffffff8800f878
=> Loading section .dtors, size 0x8 lma ffffffff8800f880
=> Loading section .rdata, size 0x1b41 lma ffffffff8800f890
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113d8
=> Loading section .data, size 0x408 lma ffffffff880113f0
=> Start address ffffffff88000004
=> Transfer rate: 573256 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[430/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spcxx01.exe
Result: invalid
Time: 0:00:00.256462 spcxx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x31ce0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88031ce0
=> Loading section .init, size 0x48 lma ffffffff88031d60
=> Loading section .fini, size 0x30 lma ffffffff88031da8
=> Loading section .ctors, size 0x24 lma ffffffff88031dd8
=> Loading section .dtors, size 0x8 lma ffffffff88031dfc
=> Loading section .rdata, size 0x5424 lma ffffffff88031e10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88037238
=> Loading section .rel.dyn, size 0x20 lma ffffffff88037250
=> Loading section .data, size 0x6c0 lma ffffffff88037270
=> Loading section .sdata, size 0x4 lma ffffffff88037930
=> Start address ffffffff88000004
=> Transfer rate: 1820960 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[431/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spedfsched01.exe
Result: invalid
Time: 0:00:00.267822 spedfsched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011680
=> Loading section .init, size 0x48 lma ffffffff880116f0
=> Loading section .fini, size 0x30 lma ffffffff88011738
=> Loading section .ctors, size 0x8 lma ffffffff88011768
=> Loading section .dtors, size 0x8 lma ffffffff88011770
=> Loading section .rdata, size 0x20a0 lma ffffffff88011780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013820
=> Loading section .data, size 0x5c0 lma ffffffff88013838
=> Start address ffffffff88000004
=> Transfer rate: 651136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[432/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spedfsched02.exe
Result: invalid
Time: 0:00:00.253451 spedfsched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12920 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012920
=> Loading section .init, size 0x48 lma ffffffff88012990
=> Loading section .fini, size 0x30 lma ffffffff880129d8
=> Loading section .ctors, size 0x8 lma ffffffff88012a08
=> Loading section .dtors, size 0x8 lma ffffffff88012a10
=> Loading section .rdata, size 0x2188 lma ffffffff88012a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ba8
=> Loading section .data, size 0x4a8 lma ffffffff88014bc0
=> Start address ffffffff88000004
=> Transfer rate: 688896 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[433/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spedfsched03.exe
Result: invalid
Time: 0:00:00.254687 spedfsched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12340 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012340
=> Loading section .init, size 0x48 lma ffffffff880123b0
=> Loading section .fini, size 0x30 lma ffffffff880123f8
=> Loading section .ctors, size 0x8 lma ffffffff88012428
=> Loading section .dtors, size 0x8 lma ffffffff88012430
=> Loading section .rdata, size 0x20b4 lma ffffffff88012440
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144f8
=> Loading section .data, size 0x4c0 lma ffffffff88014510
=> Start address ffffffff88000004
=> Transfer rate: 675360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[434/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:425 W:0 | mipstx39/jmr3904: spedfsched04.exe
Result: invalid
Time: 0:00:00.253689 spedfsched04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11420 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011420
=> Loading section .init, size 0x48 lma ffffffff88011490
=> Loading section .fini, size 0x30 lma ffffffff880114d8
=> Loading section .ctors, size 0x8 lma ffffffff88011508
=> Loading section .dtors, size 0x8 lma ffffffff88011510
=> Loading section .rdata, size 0x1f4d lma ffffffff88011520
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013470
=> Loading section .data, size 0x448 lma ffffffff88013488
=> Start address ffffffff88000004
=> Transfer rate: 640552 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[435/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:432 W:0 | mipstx39/jmr3904: sperror01.exe
Result: invalid
Time: 0:00:00.251642 sperror01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x193a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880193a0
=> Loading section .init, size 0x48 lma ffffffff88019410
=> Loading section .fini, size 0x30 lma ffffffff88019458
=> Loading section .ctors, size 0x8 lma ffffffff88019488
=> Loading section .dtors, size 0x8 lma ffffffff88019490
=> Loading section .rdata, size 0x2ef4 lma ffffffff880194a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c398
=> Loading section .data, size 0x59c lma ffffffff8801c3b0
=> Start address ffffffff88000004
=> Transfer rate: 936448 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[436/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: sperror02.exe
Result: invalid
Time: 0:00:00.262789 sperror02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19310 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019310
=> Loading section .init, size 0x48 lma ffffffff88019380
=> Loading section .fini, size 0x30 lma ffffffff880193c8
=> Loading section .ctors, size 0x8 lma ffffffff880193f8
=> Loading section .dtors, size 0x8 lma ffffffff88019400
=> Loading section .rdata, size 0x2e74 lma ffffffff88019410
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c288
=> Loading section .data, size 0x59c lma ffffffff8801c2a0
=> Start address ffffffff88000004
=> Transfer rate: 934272 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[437/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: sperror03.exe
Result: invalid
Time: 0:00:00.253744 sperror03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfb70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fb70
=> Loading section .init, size 0x48 lma ffffffff8800fbe0
=> Loading section .fini, size 0x30 lma ffffffff8800fc28
=> Loading section .ctors, size 0x8 lma ffffffff8800fc58
=> Loading section .dtors, size 0x8 lma ffffffff8800fc60
=> Loading section .rdata, size 0x19a9 lma ffffffff8800fc70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011620
=> Loading section .data, size 0x418 lma ffffffff88011638
=> Start address ffffffff88000004
=> Transfer rate: 578056 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[438/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: spevent_err03.exe
Result: invalid
Time: 0:00:00.276886 spevent_err03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17760 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017760
=> Loading section .init, size 0x48 lma ffffffff880177d0
=> Loading section .fini, size 0x30 lma ffffffff88017818
=> Loading section .ctors, size 0x8 lma ffffffff88017848
=> Loading section .dtors, size 0x8 lma ffffffff88017850
=> Loading section .rdata, size 0x2920 lma ffffffff88017860
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a180
=> Loading section .data, size 0x610 lma ffffffff8801a198
=> Start address ffffffff88000004
=> Transfer rate: 867584 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[439/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: speventsystem01.exe
Result: invalid
Time: 0:00:00.275013 speventsystem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103a0
=> Loading section .init, size 0x48 lma ffffffff88010410
=> Loading section .fini, size 0x30 lma ffffffff88010458
=> Loading section .ctors, size 0x8 lma ffffffff88010488
=> Loading section .dtors, size 0x8 lma ffffffff88010490
=> Loading section .rdata, size 0x1a51 lma ffffffff880104a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ef8
=> Loading section .data, size 0x418 lma ffffffff88011f10
=> Start address ffffffff88000004
=> Transfer rate: 596168 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[440/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: speventtransient01.exe
Result: invalid
Time: 0:00:00.264974 speventtransient01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x102c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880102c0
=> Loading section .init, size 0x48 lma ffffffff88010330
=> Loading section .fini, size 0x30 lma ffffffff88010378
=> Loading section .ctors, size 0x8 lma ffffffff880103a8
=> Loading section .dtors, size 0x8 lma ffffffff880103b0
=> Loading section .rdata, size 0x1a15 lma ffffffff880103c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011dd8
=> Loading section .data, size 0x418 lma ffffffff88011df0
=> Start address ffffffff88000004
=> Transfer rate: 593896 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[441/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: spextensions01.exe
Result: invalid
Time: 0:00:00.252932 spextensions01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11bb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011bb0
=> Loading section .init, size 0x48 lma ffffffff88011c20
=> Loading section .fini, size 0x30 lma ffffffff88011c68
=> Loading section .ctors, size 0x8 lma ffffffff88011c98
=> Loading section .dtors, size 0x8 lma ffffffff88011ca0
=> Loading section .rdata, size 0x1da9 lma ffffffff88011cb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a60
=> Loading section .data, size 0x448 lma ffffffff88013a78
=> Start address ffffffff88000004
=> Transfer rate: 652680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[442/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:433 W:0 | mipstx39/jmr3904: spfatal01.exe
Result: invalid
Time: 0:00:00.268552 spfatal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfcd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fcd0
=> Loading section .init, size 0x48 lma ffffffff8800fd40
=> Loading section .fini, size 0x30 lma ffffffff8800fd88
=> Loading section .ctors, size 0x8 lma ffffffff8800fdb8
=> Loading section .dtors, size 0x8 lma ffffffff8800fdc0
=> Loading section .rdata, size 0x1dc4 lma ffffffff8800fdd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b98
=> Loading section .data, size 0x418 lma ffffffff88011bb0
=> Start address ffffffff88000004
=> Transfer rate: 589280 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[443/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal03.exe
Result: invalid
Time: 0:00:00.257917 spfatal03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c70
=> Loading section .init, size 0x48 lma ffffffff88010ce0
=> Loading section .fini, size 0x30 lma ffffffff88010d28
=> Loading section .ctors, size 0x8 lma ffffffff88010d58
=> Loading section .dtors, size 0x8 lma ffffffff88010d60
=> Loading section .rdata, size 0x1f55 lma ffffffff88010d70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cc8
=> Loading section .data, size 0x448 lma ffffffff88012ce0
=> Start address ffffffff88000004
=> Transfer rate: 624872 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[444/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal04.exe
Result: invalid
Time: 0:00:00.252946 spfatal04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd70
=> Loading section .init, size 0x48 lma ffffffff8800fde0
=> Loading section .fini, size 0x30 lma ffffffff8800fe28
=> Loading section .ctors, size 0x8 lma ffffffff8800fe58
=> Loading section .dtors, size 0x8 lma ffffffff8800fe60
=> Loading section .rdata, size 0x1db9 lma ffffffff8800fe70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c30
=> Loading section .data, size 0x418 lma ffffffff88011c48
=> Start address ffffffff88000004
=> Transfer rate: 590472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[445/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal05.exe
Result: invalid
Time: 0:00:00.262890 spfatal05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10050 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010050
=> Loading section .init, size 0x48 lma ffffffff880100c0
=> Loading section .fini, size 0x30 lma ffffffff88010108
=> Loading section .ctors, size 0x8 lma ffffffff88010138
=> Loading section .dtors, size 0x8 lma ffffffff88010140
=> Loading section .rdata, size 0x1ef9 lma ffffffff88010150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012050
=> Loading section .data, size 0x418 lma ffffffff88012068
=> Start address ffffffff88000004
=> Transfer rate: 598920 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[446/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal09.exe
Result: invalid
Time: 0:00:00.263354 spfatal09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe30
=> Loading section .init, size 0x48 lma ffffffff8800fea0
=> Loading section .fini, size 0x30 lma ffffffff8800fee8
=> Loading section .ctors, size 0x8 lma ffffffff8800ff18
=> Loading section .dtors, size 0x8 lma ffffffff8800ff20
=> Loading section .rdata, size 0x1dc9 lma ffffffff8800ff30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d00
=> Loading section .data, size 0x418 lma ffffffff88011d18
=> Start address ffffffff88000004
=> Transfer rate: 592136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[447/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal10.exe
Result: invalid
Time: 0:00:00.255480 spfatal10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd10
=> Loading section .init, size 0x48 lma ffffffff8800fd80
=> Loading section .fini, size 0x30 lma ffffffff8800fdc8
=> Loading section .ctors, size 0x8 lma ffffffff8800fdf8
=> Loading section .dtors, size 0x8 lma ffffffff8800fe00
=> Loading section .rdata, size 0x1ab5 lma ffffffff8800fe10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118c8
=> Loading section .data, size 0x418 lma ffffffff880118e0
=> Start address ffffffff88000004
=> Transfer rate: 583528 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[448/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal11.exe
Result: invalid
Time: 0:00:00.261547 spfatal11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd00
=> Loading section .init, size 0x48 lma ffffffff8800fd70
=> Loading section .fini, size 0x30 lma ffffffff8800fdb8
=> Loading section .ctors, size 0x8 lma ffffffff8800fde8
=> Loading section .dtors, size 0x8 lma ffffffff8800fdf0
=> Loading section .rdata, size 0x1aa5 lma ffffffff8800fe00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118a8
=> Loading section .data, size 0x418 lma ffffffff880118c0
=> Start address ffffffff88000004
=> Transfer rate: 583272 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[449/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal12.exe
Result: invalid
Time: 0:00:00.251330 spfatal12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe40
=> Loading section .init, size 0x48 lma ffffffff8800feb0
=> Loading section .fini, size 0x30 lma ffffffff8800fef8
=> Loading section .ctors, size 0x8 lma ffffffff8800ff28
=> Loading section .dtors, size 0x8 lma ffffffff8800ff30
=> Loading section .rdata, size 0x1de1 lma ffffffff8800ff40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d28
=> Loading section .data, size 0x418 lma ffffffff88011d40
=> Start address ffffffff88000004
=> Transfer rate: 592456 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[450/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:441 W:0 | mipstx39/jmr3904: spfatal14.exe
Result: invalid
Time: 0:00:00.262036 spfatal14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfde0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fde0
=> Loading section .init, size 0x48 lma ffffffff8800fe50
=> Loading section .fini, size 0x30 lma ffffffff8800fe98
=> Loading section .ctors, size 0x8 lma ffffffff8800fec8
=> Loading section .dtors, size 0x8 lma ffffffff8800fed0
=> Loading section .rdata, size 0x1dc1 lma ffffffff8800fee0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ca8
=> Loading section .data, size 0x418 lma ffffffff88011cc0
=> Start address ffffffff88000004
=> Transfer rate: 591432 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[451/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:448 W:0 | mipstx39/jmr3904: spfatal15.exe
Result: invalid
Time: 0:00:00.253297 spfatal15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfde0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fde0
=> Loading section .init, size 0x48 lma ffffffff8800fe50
=> Loading section .fini, size 0x30 lma ffffffff8800fe98
=> Loading section .ctors, size 0x8 lma ffffffff8800fec8
=> Loading section .dtors, size 0x8 lma ffffffff8800fed0
=> Loading section .rdata, size 0x1dc1 lma ffffffff8800fee0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ca8
=> Loading section .data, size 0x418 lma ffffffff88011cc0
=> Start address ffffffff88000004
=> Transfer rate: 591432 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[452/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal28.exe
Result: invalid
Time: 0:00:00.260617 spfatal28.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfdb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fdb0
=> Loading section .init, size 0x48 lma ffffffff8800fe20
=> Loading section .fini, size 0x30 lma ffffffff8800fe68
=> Loading section .ctors, size 0x8 lma ffffffff8800fe98
=> Loading section .dtors, size 0x8 lma ffffffff8800fea0
=> Loading section .rdata, size 0x1db9 lma ffffffff8800feb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c70
=> Loading section .data, size 0x418 lma ffffffff88011c88
=> Start address ffffffff88000004
=> Transfer rate: 590984 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[453/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal29.exe
Result: invalid
Time: 0:00:00.258265 spfatal29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10250 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010250
=> Loading section .init, size 0x48 lma ffffffff880102c0
=> Loading section .fini, size 0x30 lma ffffffff88010308
=> Loading section .ctors, size 0x8 lma ffffffff88010338
=> Loading section .dtors, size 0x8 lma ffffffff88010340
=> Loading section .rdata, size 0x1e01 lma ffffffff88010350
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012158
=> Loading section .data, size 0x448 lma ffffffff88012170
=> Start address ffffffff88000004
=> Transfer rate: 601416 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[454/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal30.exe
Result: invalid
Time: 0:00:00.261909 spfatal30.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xe020 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff8800e020
=> Loading section .init, size 0x48 lma ffffffff8800e080
=> Loading section .fini, size 0x30 lma ffffffff8800e0c8
=> Loading section .ctors, size 0x8 lma ffffffff8800e0f8
=> Loading section .dtors, size 0x8 lma ffffffff8800e100
=> Loading section .rdata, size 0x1879 lma ffffffff8800e110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800f990
=> Loading section .data, size 0x3cc lma ffffffff8800f9a8
=> Start address ffffffff88000004
=> Transfer rate: 518952 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[455/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal31.exe
Result: invalid
Time: 0:00:00.257889 spfatal31.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf1f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f1f0
=> Loading section .init, size 0x48 lma ffffffff8800f260
=> Loading section .fini, size 0x30 lma ffffffff8800f2a8
=> Loading section .ctors, size 0x8 lma ffffffff8800f2d8
=> Loading section .dtors, size 0x8 lma ffffffff8800f2e0
=> Loading section .rdata, size 0x18e1 lma ffffffff8800f2f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010bd8
=> Loading section .data, size 0x414 lma ffffffff88010bf0
=> Start address ffffffff88000004
=> Transfer rate: 556968 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[456/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal32.exe
Result: invalid
Time: 0:00:00.269124 spfatal32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe10
=> Loading section .init, size 0x48 lma ffffffff8800fe80
=> Loading section .fini, size 0x30 lma ffffffff8800fec8
=> Loading section .ctors, size 0x8 lma ffffffff8800fef8
=> Loading section .dtors, size 0x8 lma ffffffff8800ff00
=> Loading section .rdata, size 0x1dc9 lma ffffffff8800ff10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ce0
=> Loading section .data, size 0x418 lma ffffffff88011cf8
=> Start address ffffffff88000004
=> Transfer rate: 591880 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[457/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal33.exe
Result: invalid
Time: 0:00:00.259850 spfatal33.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe70
=> Loading section .init, size 0x48 lma ffffffff8800fee0
=> Loading section .fini, size 0x30 lma ffffffff8800ff28
=> Loading section .ctors, size 0x8 lma ffffffff8800ff58
=> Loading section .dtors, size 0x8 lma ffffffff8800ff60
=> Loading section .rdata, size 0x1de9 lma ffffffff8800ff70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d60
=> Loading section .data, size 0x418 lma ffffffff88011d78
=> Start address ffffffff88000004
=> Transfer rate: 592904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[458/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:449 W:0 | mipstx39/jmr3904: spfatal34.exe
Result: invalid
Time: 0:00:00.287701 spfatal34.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfbf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fbf0
=> Loading section .init, size 0x48 lma ffffffff8800fc60
=> Loading section .fini, size 0x30 lma ffffffff8800fca8
=> Loading section .ctors, size 0x8 lma ffffffff8800fcd8
=> Loading section .dtors, size 0x8 lma ffffffff8800fce0
=> Loading section .rdata, size 0x1dac lma ffffffff8800fcf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011aa0
=> Loading section .data, size 0x418 lma ffffffff88011ab8
=> Start address ffffffff88000004
=> Transfer rate: 587296 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[459/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:453 W:0 | mipstx39/jmr3904: spfifo01.exe
Result: invalid
Time: 0:00:00.258218 spfifo01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf100 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f100
=> Loading section .init, size 0x48 lma ffffffff8800f170
=> Loading section .fini, size 0x30 lma ffffffff8800f1b8
=> Loading section .ctors, size 0x8 lma ffffffff8800f1e8
=> Loading section .dtors, size 0x8 lma ffffffff8800f1f0
=> Loading section .rdata, size 0x1a55 lma ffffffff8800f200
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010c58
=> Loading section .data, size 0x408 lma ffffffff88010c70
=> Start address ffffffff88000004
=> Transfer rate: 557928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[460/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:453 W:0 | mipstx39/jmr3904: spfifo02.exe
Result: invalid
Time: 0:00:00.256466 spfifo02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12340 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012340
=> Loading section .init, size 0x48 lma ffffffff880123b0
=> Loading section .fini, size 0x30 lma ffffffff880123f8
=> Loading section .ctors, size 0x8 lma ffffffff88012428
=> Loading section .dtors, size 0x8 lma ffffffff88012430
=> Loading section .rdata, size 0x2660 lma ffffffff88012440
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014aa0
=> Loading section .data, size 0x440 lma ffffffff88014ab8
=> Start address ffffffff88000004
=> Transfer rate: 685952 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[461/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:453 W:0 | mipstx39/jmr3904: spfifo03.exe
Result: invalid
Time: 0:00:00.261295 spfifo03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013830
=> Loading section .init, size 0x48 lma ffffffff880138b0
=> Loading section .fini, size 0x30 lma ffffffff880138f8
=> Loading section .ctors, size 0x8 lma ffffffff88013928
=> Loading section .dtors, size 0x8 lma ffffffff88013930
=> Loading section .rdata, size 0x27bc lma ffffffff88013940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016100
=> Loading section .data, size 0x47c lma ffffffff88016118
=> Start address ffffffff88000004
=> Transfer rate: 732224 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[462/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:457 W:0 | mipstx39/jmr3904: spfifo04.exe
Result: invalid
Time: 0:00:00.253729 spfifo04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012210
=> Loading section .init, size 0x48 lma ffffffff88012280
=> Loading section .fini, size 0x30 lma ffffffff880122c8
=> Loading section .ctors, size 0x8 lma ffffffff880122f8
=> Loading section .dtors, size 0x8 lma ffffffff88012300
=> Loading section .rdata, size 0x1db1 lma ffffffff88012310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140c8
=> Loading section .data, size 0x438 lma ffffffff880140e0
=> Start address ffffffff88000004
=> Transfer rate: 665672 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[463/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:457 W:0 | mipstx39/jmr3904: spfifo05.exe
Result: invalid
Time: 0:00:00.251523 spfifo05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x126e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880126e0
=> Loading section .init, size 0x48 lma ffffffff88012750
=> Loading section .fini, size 0x30 lma ffffffff88012798
=> Loading section .ctors, size 0x8 lma ffffffff880127c8
=> Loading section .dtors, size 0x8 lma ffffffff880127d0
=> Loading section .rdata, size 0x28e0 lma ffffffff880127e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150c0
=> Loading section .data, size 0x460 lma ffffffff880150d8
=> Start address ffffffff88000004
=> Transfer rate: 698752 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[464/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:460 W:0 | mipstx39/jmr3904: spfreechain01.exe
Result: invalid
Time: 0:00:00.268415 spfreechain01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf2f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f2f0
=> Loading section .init, size 0x48 lma ffffffff8800f360
=> Loading section .fini, size 0x30 lma ffffffff8800f3a8
=> Loading section .ctors, size 0x8 lma ffffffff8800f3d8
=> Loading section .dtors, size 0x8 lma ffffffff8800f3e0
=> Loading section .rdata, size 0x1b61 lma ffffffff8800f3f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f58
=> Loading section .data, size 0x408 lma ffffffff88010f70
=> Start address ffffffff88000004
=> Transfer rate: 564040 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[465/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:460 W:0 | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid
Time: 0:00:00.295103 spglobalcon01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xe690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff8800e690
=> Loading section .init, size 0x48 lma ffffffff8800e6f0
=> Loading section .fini, size 0x30 lma ffffffff8800e738
=> Loading section .ctors, size 0xc lma ffffffff8800e768
=> Loading section .dtors, size 0x8 lma ffffffff8800e774
=> Loading section .rdata, size 0x1978 lma ffffffff8800e780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880100f8
=> Loading section .data, size 0x390 lma ffffffff88010110
=> Start address ffffffff88000004
=> Transfer rate: 533728 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[466/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:460 W:0 | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid
Time: 0:00:00.281435 spglobalcon02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10090 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010090
=> Loading section .init, size 0x48 lma ffffffff88010100
=> Loading section .fini, size 0x30 lma ffffffff88010148
=> Loading section .ctors, size 0x18 lma ffffffff88010178
=> Loading section .dtors, size 0x18 lma ffffffff88010190
=> Loading section .rdata, size 0x1a25 lma ffffffff880101b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bd8
=> Loading section .data, size 0x418 lma ffffffff88011bf0
=> Start address ffffffff88000004
=> Transfer rate: 589800 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[467/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:460 W:0 | mipstx39/jmr3904: spheapprot.exe
Result: invalid
Time: 0:00:00.273121 spheapprot.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f170
=> Loading section .init, size 0x48 lma ffffffff8800f1e0
=> Loading section .fini, size 0x30 lma ffffffff8800f228
=> Loading section .ctors, size 0x8 lma ffffffff8800f258
=> Loading section .dtors, size 0x8 lma ffffffff8800f260
=> Loading section .rdata, size 0x1969 lma ffffffff8800f270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010be0
=> Loading section .data, size 0x408 lma ffffffff88010bf8
=> Start address ffffffff88000004
=> Transfer rate: 556936 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[468/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:460 W:0 | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid
Time: 0:00:00.265817 spinternalerror01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x3ed0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x50 lma ffffffff88003ed0
=> Loading section .init, size 0x48 lma ffffffff88003f20
=> Loading section .fini, size 0x30 lma ffffffff88003f68
=> Loading section .ctors, size 0x8 lma ffffffff88003f98
=> Loading section .dtors, size 0x8 lma ffffffff88003fa0
=> Loading section .rdata, size 0x1434 lma ffffffff88003fb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880053e8
=> Loading section .data, size 0x7c lma ffffffff88005400
=> Start address ffffffff88000004
=> Transfer rate: 172928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[469/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:462 W:0 | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid
Time: 0:00:00.257364 spinternalerror02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f130
=> Loading section .init, size 0x48 lma ffffffff8800f1a0
=> Loading section .fini, size 0x30 lma ffffffff8800f1e8
=> Loading section .ctors, size 0x8 lma ffffffff8800f218
=> Loading section .dtors, size 0x8 lma ffffffff8800f220
=> Loading section .rdata, size 0x1d4d lma ffffffff8800f230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f80
=> Loading section .data, size 0x408 lma ffffffff88010f98
=> Start address ffffffff88000004
=> Transfer rate: 564392 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[470/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:462 W:0 | mipstx39/jmr3904: spintr_err01.exe
Result: invalid
Time: 0:00:00.264055 spintr_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfba0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fba0
=> Loading section .init, size 0x48 lma ffffffff8800fc10
=> Loading section .fini, size 0x30 lma ffffffff8800fc58
=> Loading section .ctors, size 0x8 lma ffffffff8800fc88
=> Loading section .dtors, size 0x8 lma ffffffff8800fc90
=> Loading section .rdata, size 0x19f9 lma ffffffff8800fca0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116a0
=> Loading section .data, size 0x418 lma ffffffff880116b8
=> Start address ffffffff88000004
=> Transfer rate: 579080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[471/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: splinkersets01.exe
Result: invalid
Time: 0:00:00.259208 splinkersets01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xa0 lma ffffffff8800f830
=> Loading section .init, size 0x48 lma ffffffff8800f8d0
=> Loading section .fini, size 0x30 lma ffffffff8800f918
=> Loading section .ctors, size 0x8 lma ffffffff8800f948
=> Loading section .dtors, size 0x8 lma ffffffff8800f950
=> Loading section .rdata, size 0x2201 lma ffffffff8800f960
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b68
=> Loading section .data, size 0x408 lma ffffffff88011b80
=> Loading section .rtemsrwset, size 0x34 lma ffffffff88011f88
=> Start address ffffffff88000004
=> Transfer rate: 589160 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[472/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:468 W:0 | mipstx39/jmr3904: spmisc01.exe
Result: invalid
Time: 0:00:00.261428 spmisc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f190
=> Loading section .init, size 0x48 lma ffffffff8800f200
=> Loading section .fini, size 0x30 lma ffffffff8800f248
=> Loading section .ctors, size 0x8 lma ffffffff8800f278
=> Loading section .dtors, size 0x8 lma ffffffff8800f280
=> Loading section .rdata, size 0x1ac9 lma ffffffff8800f290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010d60
=> Loading section .data, size 0x408 lma ffffffff88010d78
=> Start address ffffffff88000004
=> Transfer rate: 560008 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[473/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spmkdir.exe
Result: invalid
Time: 0:00:00.270636 spmkdir.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf8d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f8d0
=> Loading section .init, size 0x48 lma ffffffff8800f940
=> Loading section .fini, size 0x30 lma ffffffff8800f988
=> Loading section .ctors, size 0x8 lma ffffffff8800f9b8
=> Loading section .dtors, size 0x8 lma ffffffff8800f9c0
=> Loading section .rdata, size 0x1c11 lma ffffffff8800f9d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115e8
=> Loading section .data, size 0x408 lma ffffffff88011600
=> Start address ffffffff88000004
=> Transfer rate: 577480 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[474/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid
Time: 0:00:00.262122 spmountmgr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd50
=> Loading section .init, size 0x48 lma ffffffff8800fdc0
=> Loading section .fini, size 0x30 lma ffffffff8800fe08
=> Loading section .ctors, size 0x8 lma ffffffff8800fe38
=> Loading section .dtors, size 0x8 lma ffffffff8800fe40
=> Loading section .rdata, size 0x1cb9 lma ffffffff8800fe50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b10
=> Loading section .data, size 0x408 lma ffffffff88011b28
=> Start address ffffffff88000004
=> Transfer rate: 588040 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[475/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spmrsp01.exe
Result: invalid
Time: 0:00:00.253534 spmrsp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12740 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012740
=> Loading section .init, size 0x48 lma ffffffff880127b0
=> Loading section .fini, size 0x30 lma ffffffff880127f8
=> Loading section .ctors, size 0x8 lma ffffffff88012828
=> Loading section .dtors, size 0x8 lma ffffffff88012830
=> Loading section .rdata, size 0x1c49 lma ffffffff88012840
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014490
=> Loading section .data, size 0x478 lma ffffffff880144a8
=> Start address ffffffff88000004
=> Transfer rate: 673928 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[476/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid
Time: 0:00:00.318885 spmsgq_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12450 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012450
=> Loading section .init, size 0x48 lma ffffffff880124c0
=> Loading section .fini, size 0x30 lma ffffffff88012508
=> Loading section .ctors, size 0x8 lma ffffffff88012538
=> Loading section .dtors, size 0x8 lma ffffffff88012540
=> Loading section .rdata, size 0x2a91 lma ffffffff88012550
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fe8
=> Loading section .data, size 0x448 lma ffffffff88015000
=> Start address ffffffff88000004
=> Transfer rate: 696776 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[477/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid
Time: 0:00:00.287328 spmsgq_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x119a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880119a0
=> Loading section .init, size 0x48 lma ffffffff88011a10
=> Loading section .fini, size 0x30 lma ffffffff88011a58
=> Loading section .ctors, size 0x8 lma ffffffff88011a88
=> Loading section .dtors, size 0x8 lma ffffffff88011a90
=> Loading section .rdata, size 0x22a5 lma ffffffff88011aa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d48
=> Loading section .data, size 0x448 lma ffffffff88013d60
=> Start address ffffffff88000004
=> Transfer rate: 658664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[478/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spmutex01.exe
Result: invalid
Time: 0:00:00.290821 spmutex01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014160
=> Loading section .init, size 0x48 lma ffffffff880141d0
=> Loading section .fini, size 0x30 lma ffffffff88014218
=> Loading section .ctors, size 0x8 lma ffffffff88014248
=> Loading section .dtors, size 0x8 lma ffffffff88014250
=> Loading section .rdata, size 0x1be9 lma ffffffff88014260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015e50
=> Loading section .data, size 0x478 lma ffffffff88015e68
=> Start address ffffffff88000004
=> Transfer rate: 726664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[479/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:470 W:0 | mipstx39/jmr3904: spnsext01.exe
Result: invalid
Time: 0:00:00.253250 spnsext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10010 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010010
=> Loading section .init, size 0x48 lma ffffffff88010080
=> Loading section .fini, size 0x30 lma ffffffff880100c8
=> Loading section .ctors, size 0x8 lma ffffffff880100f8
=> Loading section .dtors, size 0x8 lma ffffffff88010100
=> Loading section .rdata, size 0x19f5 lma ffffffff88010110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b08
=> Loading section .data, size 0x418 lma ffffffff88011b20
=> Start address ffffffff88000004
=> Transfer rate: 588136 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[480/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:475 W:0 | mipstx39/jmr3904: spntp01.exe
Result: invalid
Time: 0:00:00.263058 spntp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16500 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016500
=> Loading section .init, size 0x48 lma ffffffff88016580
=> Loading section .fini, size 0x30 lma ffffffff880165c8
=> Loading section .ctors, size 0x8 lma ffffffff880165f8
=> Loading section .dtors, size 0x8 lma ffffffff88016600
=> Loading section .rdata, size 0x232c lma ffffffff88016610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018940
=> Loading section .data, size 0x460 lma ffffffff88018958
=> Start address ffffffff88000004
=> Transfer rate: 814432 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[481/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:477 W:0 | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid
Time: 0:00:00.296831 spobjgetnext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff60
=> Loading section .init, size 0x48 lma ffffffff8800ffd0
=> Loading section .fini, size 0x30 lma ffffffff88010018
=> Loading section .ctors, size 0x8 lma ffffffff88010048
=> Loading section .dtors, size 0x8 lma ffffffff88010050
=> Loading section .rdata, size 0x1a75 lma ffffffff88010060
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ad8
=> Loading section .data, size 0x418 lma ffffffff88011af0
=> Start address ffffffff88000004
=> Transfer rate: 587752 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[482/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:476 W:0 | mipstx39/jmr3904: sppagesize.exe
Result: invalid
Time: 0:00:00.262958 sppagesize.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf000 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f000
=> Loading section .init, size 0x48 lma ffffffff8800f070
=> Loading section .fini, size 0x30 lma ffffffff8800f0b8
=> Loading section .ctors, size 0x8 lma ffffffff8800f0e8
=> Loading section .dtors, size 0x8 lma ffffffff8800f0f0
=> Loading section .rdata, size 0x19c1 lma ffffffff8800f100
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ac8
=> Loading section .data, size 0x408 lma ffffffff88010ae0
=> Start address ffffffff88000004
=> Transfer rate: 554696 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[483/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:477 W:0 | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid
Time: 0:00:00.259670 sppartition_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ec0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ec0
=> Loading section .init, size 0x48 lma ffffffff88010f30
=> Loading section .fini, size 0x30 lma ffffffff88010f78
=> Loading section .ctors, size 0x8 lma ffffffff88010fa8
=> Loading section .dtors, size 0x8 lma ffffffff88010fb0
=> Loading section .rdata, size 0x2589 lma ffffffff88010fc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013550
=> Loading section .data, size 0x448 lma ffffffff88013568
=> Start address ffffffff88000004
=> Transfer rate: 642312 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[484/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:477 W:0 | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid
Time: 0:00:00.286218 sppercpudata01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f860
=> Loading section .init, size 0x48 lma ffffffff8800f8d0
=> Loading section .fini, size 0x30 lma ffffffff8800f918
=> Loading section .ctors, size 0x8 lma ffffffff8800f948
=> Loading section .dtors, size 0x8 lma ffffffff8800f950
=> Loading section .rdata, size 0x1b31 lma ffffffff8800f960
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011498
=> Loading section .data, size 0x408 lma ffffffff880114b0
=> Loading section .rtemsrwset, size 0x4c lma ffffffff880118b8
=> Start address ffffffff88000004
=> Transfer rate: 575400 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[485/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: spport_err01.exe
Result: invalid
Time: 0:00:00.287094 spport_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106d0
=> Loading section .init, size 0x48 lma ffffffff88010740
=> Loading section .fini, size 0x30 lma ffffffff88010788
=> Loading section .ctors, size 0x8 lma ffffffff880107b8
=> Loading section .dtors, size 0x8 lma ffffffff880107c0
=> Loading section .rdata, size 0x2075 lma ffffffff880107d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012848
=> Loading section .data, size 0x448 lma ffffffff88012860
=> Start address ffffffff88000004
=> Transfer rate: 615656 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[486/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:478 W:0 | mipstx39/jmr3904: sppps01.exe
Result: invalid
Time: 0:00:00.268422 sppps01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16880 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016880
=> Loading section .init, size 0x48 lma ffffffff88016900
=> Loading section .fini, size 0x30 lma ffffffff88016948
=> Loading section .ctors, size 0x8 lma ffffffff88016978
=> Loading section .dtors, size 0x8 lma ffffffff88016980
=> Loading section .rdata, size 0x228c lma ffffffff88016990
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018c20
=> Loading section .data, size 0x478 lma ffffffff88018c38
=> Start address ffffffff88000004
=> Transfer rate: 820512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[487/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:478 W:0 | mipstx39/jmr3904: spprintk.exe
Result: invalid
Time: 0:00:00.263161 spprintk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff8800f060
=> Loading section .init, size 0x48 lma ffffffff8800f0c0
=> Loading section .fini, size 0x30 lma ffffffff8800f108
=> Loading section .ctors, size 0x8 lma ffffffff8800f138
=> Loading section .dtors, size 0x8 lma ffffffff8800f140
=> Loading section .rdata, size 0x23d9 lma ffffffff8800f150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011530
=> Loading section .data, size 0x3c8 lma ffffffff88011548
=> Start address ffffffff88000004
=> Transfer rate: 575496 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[488/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:483 W:0 | mipstx39/jmr3904: spprivenv01.exe
Result: invalid
Time: 0:00:00.267446 spprivenv01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011140
=> Loading section .init, size 0x48 lma ffffffff880111b0
=> Loading section .fini, size 0x30 lma ffffffff880111f8
=> Loading section .ctors, size 0x8 lma ffffffff88011228
=> Loading section .dtors, size 0x8 lma ffffffff88011230
=> Loading section .rdata, size 0x20ec lma ffffffff88011240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013330
=> Loading section .data, size 0x45c lma ffffffff88013348
=> Start address ffffffff88000004
=> Transfer rate: 638144 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[489/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:486 W:0 | mipstx39/jmr3904: spprofiling01.exe
Result: invalid
Time: 0:00:00.254756 spprofiling01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff50
=> Loading section .init, size 0x48 lma ffffffff8800ffc0
=> Loading section .fini, size 0x30 lma ffffffff88010008
=> Loading section .ctors, size 0x8 lma ffffffff88010038
=> Loading section .dtors, size 0x8 lma ffffffff88010040
=> Loading section .rdata, size 0x1a6d lma ffffffff88010050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ac0
=> Loading section .data, size 0x418 lma ffffffff88011ad8
=> Start address ffffffff88000004
=> Transfer rate: 587560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[490/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:486 W:0 | mipstx39/jmr3904: spqreslib.exe
Result: invalid
Time: 0:00:00.259716 spqreslib.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13050 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013050
=> Loading section .init, size 0x48 lma ffffffff880130c0
=> Loading section .fini, size 0x30 lma ffffffff88013108
=> Loading section .ctors, size 0x8 lma ffffffff88013138
=> Loading section .dtors, size 0x8 lma ffffffff88013140
=> Loading section .rdata, size 0x2661 lma ffffffff88013150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157b8
=> Loading section .data, size 0x458 lma ffffffff880157d0
=> Start address ffffffff88000004
=> Transfer rate: 712904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[491/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:486 W:0 | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid
Time: 0:00:00.263675 spratemon_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011c30
=> Loading section .init, size 0x48 lma ffffffff88011ca0
=> Loading section .fini, size 0x30 lma ffffffff88011ce8
=> Loading section .ctors, size 0x8 lma ffffffff88011d18
=> Loading section .dtors, size 0x8 lma ffffffff88011d20
=> Loading section .rdata, size 0x2739 lma ffffffff88011d30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014470
=> Loading section .data, size 0x448 lma ffffffff88014488
=> Start address ffffffff88000004
=> Transfer rate: 673288 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[492/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:485 W:0 | mipstx39/jmr3904: sprbtree01.exe
Result: invalid
Time: 0:00:00.257979 sprbtree01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110e0
=> Loading section .init, size 0x48 lma ffffffff88011150
=> Loading section .fini, size 0x30 lma ffffffff88011198
=> Loading section .ctors, size 0x8 lma ffffffff880111c8
=> Loading section .dtors, size 0x8 lma ffffffff880111d0
=> Loading section .rdata, size 0x6f5d lma ffffffff880111e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018140
=> Loading section .data, size 0x498 lma ffffffff88018158
=> Start address ffffffff88000004
=> Transfer rate: 798504 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[493/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:486 W:0 | mipstx39/jmr3904: spregion_err01.exe
Result: invalid
Time: 0:00:00.260807 spregion_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12aa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012aa0
=> Loading section .init, size 0x48 lma ffffffff88012b10
=> Loading section .fini, size 0x30 lma ffffffff88012b58
=> Loading section .ctors, size 0x8 lma ffffffff88012b88
=> Loading section .dtors, size 0x8 lma ffffffff88012b90
=> Loading section .rdata, size 0x2951 lma ffffffff88012ba0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880154f8
=> Loading section .data, size 0x448 lma ffffffff88015510
=> Start address ffffffff88000004
=> Transfer rate: 707144 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[494/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:486 W:0 | mipstx39/jmr3904: sprmsched01.exe
Result: invalid
Time: 0:00:00.252620 sprmsched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011400
=> Loading section .init, size 0x48 lma ffffffff88011470
=> Loading section .fini, size 0x30 lma ffffffff880114b8
=> Loading section .ctors, size 0x8 lma ffffffff880114e8
=> Loading section .dtors, size 0x8 lma ffffffff880114f0
=> Loading section .rdata, size 0x1f3d lma ffffffff88011500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013440
=> Loading section .data, size 0x448 lma ffffffff88013458
=> Start address ffffffff88000004
=> Transfer rate: 640168 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[495/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: sprmsched02.exe
Result: invalid
Time: 0:00:00.259384 sprmsched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c00
=> Loading section .init, size 0x48 lma ffffffff88010c70
=> Loading section .fini, size 0x30 lma ffffffff88010cb8
=> Loading section .ctors, size 0x8 lma ffffffff88010ce8
=> Loading section .dtors, size 0x8 lma ffffffff88010cf0
=> Loading section .rdata, size 0x1f05 lma ffffffff88010d00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c08
=> Loading section .data, size 0x448 lma ffffffff88012c20
=> Start address ffffffff88000004
=> Transfer rate: 623336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[496/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:489 W:0 | mipstx39/jmr3904: spscheduler01.exe
Result: invalid
Time: 0:00:00.254748 spscheduler01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15040 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015040
=> Loading section .init, size 0x48 lma ffffffff880150b0
=> Loading section .fini, size 0x30 lma ffffffff880150f8
=> Loading section .ctors, size 0x8 lma ffffffff88015128
=> Loading section .dtors, size 0x8 lma ffffffff88015130
=> Loading section .rdata, size 0x1e45 lma ffffffff88015140
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016f88
=> Loading section .data, size 0x478 lma ffffffff88016fa0
=> Start address ffffffff88000004
=> Transfer rate: 761960 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[497/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:493 W:0 | mipstx39/jmr3904: spsem01.exe
Result: invalid
Time: 0:00:00.260637 spsem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011c30
=> Loading section .init, size 0x48 lma ffffffff88011ca0
=> Loading section .fini, size 0x30 lma ffffffff88011ce8
=> Loading section .ctors, size 0x8 lma ffffffff88011d18
=> Loading section .dtors, size 0x8 lma ffffffff88011d20
=> Loading section .rdata, size 0x2071 lma ffffffff88011d30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013da8
=> Loading section .data, size 0x448 lma ffffffff88013dc0
=> Start address ffffffff88000004
=> Transfer rate: 659400 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[498/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:494 W:0 | mipstx39/jmr3904: spsem02.exe
Result: invalid
Time: 0:00:00.264873 spsem02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11f30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011f30
=> Loading section .init, size 0x48 lma ffffffff88011fa0
=> Loading section .fini, size 0x30 lma ffffffff88011fe8
=> Loading section .ctors, size 0x8 lma ffffffff88012018
=> Loading section .dtors, size 0x8 lma ffffffff88012020
=> Loading section .rdata, size 0x2131 lma ffffffff88012030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014168
=> Loading section .data, size 0x448 lma ffffffff88014180
=> Start address ffffffff88000004
=> Transfer rate: 667080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[499/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsem03.exe
Result: invalid
Time: 0:00:00.285449 spsem03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e70
=> Loading section .init, size 0x48 lma ffffffff88010ee0
=> Loading section .fini, size 0x30 lma ffffffff88010f28
=> Loading section .ctors, size 0x8 lma ffffffff88010f58
=> Loading section .dtors, size 0x8 lma ffffffff88010f60
=> Loading section .rdata, size 0x1a05 lma ffffffff88010f70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012978
=> Loading section .data, size 0x448 lma ffffffff88012990
=> Start address ffffffff88000004
=> Transfer rate: 618088 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[500/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsem_err01.exe
Result: invalid
Time: 0:00:00.305926 spsem_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11920 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011920
=> Loading section .init, size 0x48 lma ffffffff88011990
=> Loading section .fini, size 0x30 lma ffffffff880119d8
=> Loading section .ctors, size 0x8 lma ffffffff88011a08
=> Loading section .dtors, size 0x8 lma ffffffff88011a10
=> Loading section .rdata, size 0x2495 lma ffffffff88011a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013eb8
=> Loading section .data, size 0x448 lma ffffffff88013ed0
=> Start address ffffffff88000004
=> Transfer rate: 661608 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[501/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsem_err02.exe
Result: invalid
Time: 0:00:00.274667 spsem_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b10
=> Loading section .init, size 0x48 lma ffffffff88011b80
=> Loading section .fini, size 0x30 lma ffffffff88011bc8
=> Loading section .ctors, size 0x8 lma ffffffff88011bf8
=> Loading section .dtors, size 0x8 lma ffffffff88011c00
=> Loading section .rdata, size 0x232d lma ffffffff88011c10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f40
=> Loading section .data, size 0x448 lma ffffffff88013f58
=> Start address ffffffff88000004
=> Transfer rate: 662696 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[502/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid
Time: 0:00:00.264872 spsignal_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10220 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010220
=> Loading section .init, size 0x48 lma ffffffff88010290
=> Loading section .fini, size 0x30 lma ffffffff880102d8
=> Loading section .ctors, size 0x8 lma ffffffff88010308
=> Loading section .dtors, size 0x8 lma ffffffff88010310
=> Loading section .rdata, size 0x1e61 lma ffffffff88010320
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012188
=> Loading section .data, size 0x418 lma ffffffff880121a0
=> Start address ffffffff88000004
=> Transfer rate: 601416 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[503/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid
Time: 0:00:00.254818 spsimplesched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11720 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011720
=> Loading section .init, size 0x48 lma ffffffff88011790
=> Loading section .fini, size 0x30 lma ffffffff880117d8
=> Loading section .ctors, size 0x8 lma ffffffff88011808
=> Loading section .dtors, size 0x8 lma ffffffff88011810
=> Loading section .rdata, size 0x201c lma ffffffff88011820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013840
=> Loading section .data, size 0x5c0 lma ffffffff88013858
=> Start address ffffffff88000004
=> Transfer rate: 651360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[504/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:496 W:0 | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid
Time: 0:00:00.251356 spsimplesched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880114a0
=> Loading section .init, size 0x48 lma ffffffff88011510
=> Loading section .fini, size 0x30 lma ffffffff88011558
=> Loading section .ctors, size 0x8 lma ffffffff88011588
=> Loading section .dtors, size 0x8 lma ffffffff88011590
=> Loading section .rdata, size 0x1f81 lma ffffffff880115a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013528
=> Loading section .data, size 0x448 lma ffffffff88013540
=> Start address ffffffff88000004
=> Transfer rate: 641992 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[505/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:497 W:0 | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid
Time: 0:00:00.253109 spsimplesched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffd0
=> Loading section .init, size 0x48 lma ffffffff88010040
=> Loading section .fini, size 0x30 lma ffffffff88010088
=> Loading section .ctors, size 0x8 lma ffffffff880100b8
=> Loading section .dtors, size 0x8 lma ffffffff880100c0
=> Loading section .rdata, size 0x1dc5 lma ffffffff880100d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e98
=> Loading section .data, size 0x448 lma ffffffff88011eb0
=> Start address ffffffff88000004
=> Transfer rate: 595816 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[506/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:497 W:0 | mipstx39/jmr3904: spsize.exe
Result: invalid
Time: 0:00:00.255700 spsize.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012210
=> Loading section .init, size 0x48 lma ffffffff88012280
=> Loading section .fini, size 0x30 lma ffffffff880122c8
=> Loading section .ctors, size 0x8 lma ffffffff880122f8
=> Loading section .dtors, size 0x8 lma ffffffff88012300
=> Loading section .rdata, size 0x24f8 lma ffffffff88012310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014808
=> Loading section .data, size 0x420 lma ffffffff88014820
=> Start address ffffffff88000004
=> Transfer rate: 680384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[507/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spstdc17.exe
Result: invalid
Time: 0:00:00.267099 spstdc17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdc17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdc17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xef40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ef40
=> Loading section .init, size 0x48 lma ffffffff8800efb0
=> Loading section .fini, size 0x30 lma ffffffff8800eff8
=> Loading section .ctors, size 0x8 lma ffffffff8800f028
=> Loading section .dtors, size 0x8 lma ffffffff8800f030
=> Loading section .rdata, size 0x1969 lma ffffffff8800f040
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880109b0
=> Loading section .data, size 0x408 lma ffffffff880109c8
=> Start address ffffffff88000004
=> Transfer rate: 552456 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdc17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[508/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid
Time: 0:00:00.256442 spstdthreads01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13fc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013fc0
=> Loading section .init, size 0x48 lma ffffffff88014040
=> Loading section .fini, size 0x30 lma ffffffff88014088
=> Loading section .ctors, size 0x8 lma ffffffff880140b8
=> Loading section .dtors, size 0x8 lma ffffffff880140c0
=> Loading section .rdata, size 0x1c31 lma ffffffff880140d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015d08
=> Loading section .data, size 0x530 lma ffffffff88015d20
=> Start address ffffffff88000004
=> Transfer rate: 725512 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[509/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spstkalloc.exe
Result: invalid
Time: 0:00:00.282888 spstkalloc.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf640 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f640
=> Loading section .init, size 0x48 lma ffffffff8800f6b0
=> Loading section .fini, size 0x30 lma ffffffff8800f6f8
=> Loading section .ctors, size 0x8 lma ffffffff8800f728
=> Loading section .dtors, size 0x8 lma ffffffff8800f730
=> Loading section .rdata, size 0x1e70 lma ffffffff8800f740
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115b0
=> Loading section .data, size 0x408 lma ffffffff880115c8
=> Start address ffffffff88000004
=> Transfer rate: 577088 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[510/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid
Time: 0:00:00.277256 spstkalloc02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x9280 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff88009280
=> Loading section .init, size 0x48 lma ffffffff880092e0
=> Loading section .fini, size 0x30 lma ffffffff88009328
=> Loading section .ctors, size 0x8 lma ffffffff88009358
=> Loading section .dtors, size 0x8 lma ffffffff88009360
=> Loading section .rdata, size 0x1958 lma ffffffff88009370
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800acc8
=> Loading section .data, size 0x1cc lma ffffffff8800ace0
=> Start address ffffffff88000004
=> Transfer rate: 357664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[511/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid
Time: 0:00:00.254883 spstkalloc03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017680
=> Loading section .init, size 0x48 lma ffffffff880176f0
=> Loading section .fini, size 0x30 lma ffffffff88017738
=> Loading section .ctors, size 0x8 lma ffffffff88017768
=> Loading section .dtors, size 0x8 lma ffffffff88017770
=> Loading section .rdata, size 0x2088 lma ffffffff88017780
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019808
=> Loading section .data, size 0x5a8 lma ffffffff88019820
=> Start address ffffffff88000004
=> Transfer rate: 847360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[512/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid
Time: 0:00:00.297191 spstkalloc04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17630 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017630
=> Loading section .init, size 0x48 lma ffffffff880176a0
=> Loading section .fini, size 0x30 lma ffffffff880176e8
=> Loading section .ctors, size 0x8 lma ffffffff88017718
=> Loading section .dtors, size 0x8 lma ffffffff88017720
=> Loading section .rdata, size 0x2050 lma ffffffff88017730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019780
=> Loading section .data, size 0x5a8 lma ffffffff88019798
=> Start address ffffffff88000004
=> Transfer rate: 846272 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[513/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spsysinit01.exe
Result: invalid
Time: 0:00:00.251348 spsysinit01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18a60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x310 lma ffffffff88018a60
=> Loading section .init, size 0x48 lma ffffffff88018d70
=> Loading section .fini, size 0x30 lma ffffffff88018db8
=> Loading section .ctors, size 0x8 lma ffffffff88018de8
=> Loading section .dtors, size 0x8 lma ffffffff88018df0
=> Loading section .rdata, size 0x3a25 lma ffffffff88018e00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c828
=> Loading section .data, size 0x7c0 lma ffffffff8801c840
=> Start address ffffffff88000004
=> Transfer rate: 950184 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[514/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:505 W:0 | mipstx39/jmr3904: spsyslock01.exe
Result: invalid
Time: 0:00:00.260138 spsyslock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13610 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013610
=> Loading section .init, size 0x48 lma ffffffff88013680
=> Loading section .fini, size 0x30 lma ffffffff880136c8
=> Loading section .ctors, size 0x8 lma ffffffff880136f8
=> Loading section .dtors, size 0x8 lma ffffffff88013700
=> Loading section .rdata, size 0x1e61 lma ffffffff88013710
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015578
=> Loading section .data, size 0x418 lma ffffffff88015590
=> Start address ffffffff88000004
=> Transfer rate: 707784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[515/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: sptask_err01.exe
Result: invalid
Time: 0:00:00.273917 sptask_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1f11 lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012418
=> Loading section .data, size 0x418 lma ffffffff88012430
=> Start address ffffffff88000004
=> Transfer rate: 606664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[516/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: sptask_err02.exe
Result: invalid
Time: 0:00:00.252238 sptask_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11380 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011380
=> Loading section .init, size 0x48 lma ffffffff880113f0
=> Loading section .fini, size 0x30 lma ffffffff88011438
=> Loading section .ctors, size 0x8 lma ffffffff88011468
=> Loading section .dtors, size 0x8 lma ffffffff88011470
=> Loading section .rdata, size 0x2131 lma ffffffff88011480
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135b8
=> Loading section .data, size 0x440 lma ffffffff880135d0
=> Start address ffffffff88000004
=> Transfer rate: 643080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[517/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: sptask_err03.exe
Result: invalid
Time: 0:00:00.268428 sptask_err03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010860
=> Loading section .init, size 0x48 lma ffffffff880108d0
=> Loading section .fini, size 0x30 lma ffffffff88010918
=> Loading section .ctors, size 0x8 lma ffffffff88010948
=> Loading section .dtors, size 0x8 lma ffffffff88010950
=> Loading section .rdata, size 0x22f5 lma ffffffff88010960
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c58
=> Loading section .data, size 0x418 lma ffffffff88012c70
=> Start address ffffffff88000004
=> Transfer rate: 623592 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[518/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: sptask_err04.exe
Result: invalid
Time: 0:00:00.253499 sptask_err04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x118d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880118d0
=> Loading section .init, size 0x48 lma ffffffff88011940
=> Loading section .fini, size 0x30 lma ffffffff88011988
=> Loading section .ctors, size 0x8 lma ffffffff880119b8
=> Loading section .dtors, size 0x8 lma ffffffff880119c0
=> Loading section .rdata, size 0x2479 lma ffffffff880119d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e50
=> Loading section .data, size 0x418 lma ffffffff88013e68
=> Start address ffffffff88000004
=> Transfer rate: 660360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[519/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid
Time: 0:00:00.263478 sptasknopreempt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10730 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010730
=> Loading section .init, size 0x48 lma ffffffff880107a0
=> Loading section .fini, size 0x30 lma ffffffff880107e8
=> Loading section .ctors, size 0x8 lma ffffffff88010818
=> Loading section .dtors, size 0x8 lma ffffffff88010820
=> Loading section .rdata, size 0x19dd lma ffffffff88010830
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012210
=> Loading section .data, size 0x448 lma ffffffff88012228
=> Start address ffffffff88000004
=> Transfer rate: 602920 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[520/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: spthread01.exe
Result: invalid
Time: 0:00:00.282111 spthread01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11610 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011610
=> Loading section .init, size 0x48 lma ffffffff88011680
=> Loading section .fini, size 0x30 lma ffffffff880116c8
=> Loading section .ctors, size 0x8 lma ffffffff880116f8
=> Loading section .dtors, size 0x8 lma ffffffff88011700
=> Loading section .rdata, size 0x1a39 lma ffffffff88011710
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013150
=> Loading section .data, size 0x418 lma ffffffff88013168
=> Start address ffffffff88000004
=> Transfer rate: 633736 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[521/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid
Time: 0:00:00.255782 spthreadlife01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012e10
=> Loading section .init, size 0x48 lma ffffffff88012e80
=> Loading section .fini, size 0x30 lma ffffffff88012ec8
=> Loading section .ctors, size 0x8 lma ffffffff88012ef8
=> Loading section .dtors, size 0x8 lma ffffffff88012f00
=> Loading section .rdata, size 0x1d05 lma ffffffff88012f10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c18
=> Loading section .data, size 0x478 lma ffffffff88014c30
=> Start address ffffffff88000004
=> Transfer rate: 689384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[522/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:513 W:0 | mipstx39/jmr3904: spthreadq01.exe
Result: invalid
Time: 0:00:00.266370 spthreadq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12260 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012260
=> Loading section .init, size 0x48 lma ffffffff880122e0
=> Loading section .fini, size 0x30 lma ffffffff88012328
=> Loading section .ctors, size 0x8 lma ffffffff88012358
=> Loading section .dtors, size 0x8 lma ffffffff88012360
=> Loading section .rdata, size 0x1b89 lma ffffffff88012370
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f00
=> Loading section .data, size 0x4c8 lma ffffffff88013f18
=> Start address ffffffff88000004
=> Transfer rate: 663176 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[523/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:516 W:0 | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid
Time: 0:00:00.258665 sptimecounter01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x6590 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x50 lma ffffffff88006590
=> Loading section .init, size 0x48 lma ffffffff880065e0
=> Loading section .fini, size 0x30 lma ffffffff88006628
=> Loading section .ctors, size 0x8 lma ffffffff88006658
=> Loading section .dtors, size 0x8 lma ffffffff88006660
=> Loading section .rdata, size 0x1754 lma ffffffff88006670
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88007dc8
=> Loading section .data, size 0x240 lma ffffffff88007de0
=> Start address ffffffff88000004
=> Transfer rate: 262304 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[524/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:515 W:0 | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid
Time: 0:00:00.253547 sptimecounter02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012060
=> Loading section .init, size 0x48 lma ffffffff880120e0
=> Loading section .fini, size 0x30 lma ffffffff88012128
=> Loading section .ctors, size 0x8 lma ffffffff88012158
=> Loading section .dtors, size 0x8 lma ffffffff88012160
=> Loading section .rdata, size 0x1b3d lma ffffffff88012170
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013cb0
=> Loading section .data, size 0x448 lma ffffffff88013cc8
=> Start address ffffffff88000004
=> Transfer rate: 657448 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[525/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:521 W:0 | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid
Time: 0:00:00.253437 sptimecounter03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d80
=> Loading section .init, size 0x48 lma ffffffff88010df0
=> Loading section .fini, size 0x30 lma ffffffff88010e38
=> Loading section .ctors, size 0x8 lma ffffffff88010e68
=> Loading section .dtors, size 0x8 lma ffffffff88010e70
=> Loading section .rdata, size 0x1a15 lma ffffffff88010e80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012898
=> Loading section .data, size 0x448 lma ffffffff880128b0
=> Start address ffffffff88000004
=> Transfer rate: 616296 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[526/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid
Time: 0:00:00.284830 sptimecounter04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10250 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010250
=> Loading section .init, size 0x48 lma ffffffff880102c0
=> Loading section .fini, size 0x30 lma ffffffff88010308
=> Loading section .ctors, size 0x8 lma ffffffff88010338
=> Loading section .dtors, size 0x8 lma ffffffff88010340
=> Loading section .rdata, size 0x1a91 lma ffffffff88010350
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011de8
=> Loading section .data, size 0x418 lma ffffffff88011e00
=> Start address ffffffff88000004
=> Transfer rate: 593992 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[527/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid
Time: 0:00:00.252954 sptimer_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12100 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012100
=> Loading section .init, size 0x48 lma ffffffff88012170
=> Loading section .fini, size 0x30 lma ffffffff880121b8
=> Loading section .ctors, size 0x8 lma ffffffff880121e8
=> Loading section .dtors, size 0x8 lma ffffffff880121f0
=> Loading section .rdata, size 0x2569 lma ffffffff88012200
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014770
=> Loading section .data, size 0x470 lma ffffffff88014788
=> Start address ffffffff88000004
=> Transfer rate: 679752 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[528/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid
Time: 0:00:00.251528 sptimer_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880120c0
=> Loading section .init, size 0x48 lma ffffffff88012130
=> Loading section .fini, size 0x30 lma ffffffff88012178
=> Loading section .ctors, size 0x8 lma ffffffff880121a8
=> Loading section .dtors, size 0x8 lma ffffffff880121b0
=> Loading section .rdata, size 0x2379 lma ffffffff880121c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014540
=> Loading section .data, size 0x470 lma ffffffff88014558
=> Start address ffffffff88000004
=> Transfer rate: 675272 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[529/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid
Time: 0:00:00.297174 sptimerserver01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11590 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011590
=> Loading section .init, size 0x48 lma ffffffff88011600
=> Loading section .fini, size 0x30 lma ffffffff88011648
=> Loading section .ctors, size 0x8 lma ffffffff88011678
=> Loading section .dtors, size 0x8 lma ffffffff88011680
=> Loading section .rdata, size 0x1aa1 lma ffffffff88011690
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013138
=> Loading section .data, size 0x470 lma ffffffff88013150
=> Start address ffffffff88000004
=> Transfer rate: 634248 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[530/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptimespec01.exe
Result: invalid
Time: 0:00:00.256378 sptimespec01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109b0
=> Loading section .init, size 0x48 lma ffffffff88010a20
=> Loading section .fini, size 0x30 lma ffffffff88010a68
=> Loading section .ctors, size 0x8 lma ffffffff88010a98
=> Loading section .dtors, size 0x8 lma ffffffff88010aa0
=> Loading section .rdata, size 0x1d71 lma ffffffff88010ab0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012828
=> Loading section .data, size 0x428 lma ffffffff88012840
=> Start address ffffffff88000004
=> Transfer rate: 615112 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[531/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptls01.exe
Result: invalid
Time: 0:00:00.254743 sptls01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107c0
=> Loading section .init, size 0x48 lma ffffffff88010830
=> Loading section .fini, size 0x30 lma ffffffff88010878
=> Loading section .ctors, size 0x8 lma ffffffff880108a8
=> Loading section .dtors, size 0x8 lma ffffffff880108b0
=> Loading section .rdata, size 0x1a31 lma ffffffff880108c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122f8
=> Loading section .tdata, size 0x1 lma ffffffff88012310
=> Loading section .data, size 0x420 lma ffffffff88012318
=> Start address ffffffff88000004
=> Transfer rate: 604432 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[532/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:523 W:0 | mipstx39/jmr3904: sptls02.exe
Result: invalid
Time: 0:00:00.299154 sptls02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2de0c lma ffffffff88000000
=> Loading section .rtemsroset, size 0x74 lma ffffffff8802de0c
=> Loading section .init, size 0x48 lma ffffffff8802de80
=> Loading section .fini, size 0x30 lma ffffffff8802dec8
=> Loading section .ctors, size 0x18 lma ffffffff8802def8
=> Loading section .dtors, size 0x8 lma ffffffff8802df10
=> Loading section .rdata, size 0x4224 lma ffffffff8802df20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88032148
=> Loading section .rel.dyn, size 0x10 lma ffffffff88032160
=> Loading section .tdata, size 0x114 lma ffffffff88032200
=> Loading section .data, size 0x640 lma ffffffff88032400
=> Loading section .sdata, size 0x4 lma ffffffff88032a40
=> Start address ffffffff88000004
=> Transfer rate: 1656288 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[533/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:525 W:0 | mipstx39/jmr3904: sptls03.exe
Result: invalid
Time: 0:00:00.255015 sptls03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x8f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff88008f50
=> Loading section .init, size 0x48 lma ffffffff88008fb0
=> Loading section .fini, size 0x30 lma ffffffff88008ff8
=> Loading section .ctors, size 0x8 lma ffffffff88009028
=> Loading section .dtors, size 0x8 lma ffffffff88009030
=> Loading section .rdata, size 0x1528 lma ffffffff88009040
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a568
=> Loading section .data, size 0x1d4 lma ffffffff8800a580
=> Start address ffffffff88000004
=> Transfer rate: 342624 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[534/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:526 W:0 | mipstx39/jmr3904: sptls04.exe
Result: invalid
Time: 0:00:00.258706 sptls04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf040 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f040
=> Loading section .init, size 0x48 lma ffffffff8800f0b0
=> Loading section .fini, size 0x30 lma ffffffff8800f0f8
=> Loading section .ctors, size 0xc lma ffffffff8800f128
=> Loading section .dtors, size 0x8 lma ffffffff8800f134
=> Loading section .rdata, size 0x1989 lma ffffffff8800f140
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ad0
=> Loading section .tdata, size 0x4 lma ffffffff88010ae8
=> Loading section .data, size 0x408 lma ffffffff88010af0
=> Start address ffffffff88000004
=> Transfer rate: 554824 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[535/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: spunlimited01.exe
Result: invalid
Time: 0:00:00.251551 spunlimited01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spunlimited01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spunlimited01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16b80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016b80
=> Loading section .init, size 0x48 lma ffffffff88016c00
=> Loading section .fini, size 0x30 lma ffffffff88016c48
=> Loading section .ctors, size 0x8 lma ffffffff88016c78
=> Loading section .dtors, size 0x8 lma ffffffff88016c80
=> Loading section .rdata, size 0x21f8 lma ffffffff88016c90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018e88
=> Loading section .data, size 0x478 lma ffffffff88018ea0
=> Start address ffffffff88000004
=> Transfer rate: 825472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spunlimited01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[536/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: spversion01.exe
Result: invalid
Time: 0:00:00.254911 spversion01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf0b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f0b0
=> Loading section .init, size 0x48 lma ffffffff8800f120
=> Loading section .fini, size 0x30 lma ffffffff8800f168
=> Loading section .ctors, size 0x8 lma ffffffff8800f198
=> Loading section .dtors, size 0x8 lma ffffffff8800f1a0
=> Loading section .rdata, size 0x1a15 lma ffffffff8800f1b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010bc8
=> Loading section .data, size 0x408 lma ffffffff88010be0
=> Start address ffffffff88000004
=> Transfer rate: 556776 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[537/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: spwatchdog.exe
Result: invalid
Time: 0:00:00.262165 spwatchdog.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ae0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012ae0
=> Loading section .init, size 0x48 lma ffffffff88012b50
=> Loading section .fini, size 0x30 lma ffffffff88012b98
=> Loading section .ctors, size 0x8 lma ffffffff88012bc8
=> Loading section .dtors, size 0x8 lma ffffffff88012bd0
=> Loading section .rdata, size 0x2554 lma ffffffff88012be0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015138
=> Loading section .data, size 0x490 lma ffffffff88015150
=> Start address ffffffff88000004
=> Transfer rate: 700064 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[538/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: spwkspace.exe
Result: invalid
Time: 0:00:00.293944 spwkspace.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf6f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f6f0
=> Loading section .init, size 0x48 lma ffffffff8800f760
=> Loading section .fini, size 0x30 lma ffffffff8800f7a8
=> Loading section .ctors, size 0x8 lma ffffffff8800f7d8
=> Loading section .dtors, size 0x8 lma ffffffff8800f7e0
=> Loading section .rdata, size 0x1c0d lma ffffffff8800f7f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011400
=> Loading section .data, size 0x408 lma ffffffff88011418
=> Start address ffffffff88000004
=> Transfer rate: 573608 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[539/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: tm01.exe
Result: invalid
Time: 0:00:00.262440 tm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109d0
=> Loading section .init, size 0x48 lma ffffffff88010a40
=> Loading section .fini, size 0x30 lma ffffffff88010a88
=> Loading section .ctors, size 0x8 lma ffffffff88010ab8
=> Loading section .dtors, size 0x8 lma ffffffff88010ac0
=> Loading section .rdata, size 0x1e7d lma ffffffff88010ad0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012950
=> Loading section .data, size 0x438 lma ffffffff88012968
=> Start address ffffffff88000004
=> Transfer rate: 617640 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[540/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: tm02.exe
Result: invalid
Time: 0:00:00.255253 tm02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1e9d lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123a0
=> Loading section .data, size 0x438 lma ffffffff880123b8
=> Start address ffffffff88000004
=> Transfer rate: 605992 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[541/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: tm03.exe
Result: invalid
Time: 0:00:00.265798 tm03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=> Loading section .init, size 0x48 lma ffffffff880109b0
=> Loading section .fini, size 0x30 lma ffffffff880109f8
=> Loading section .ctors, size 0x8 lma ffffffff88010a28
=> Loading section .dtors, size 0x8 lma ffffffff88010a30
=> Loading section .rdata, size 0x1e65 lma ffffffff88010a40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128a8
=> Loading section .data, size 0x438 lma ffffffff880128c0
=> Start address ffffffff88000004
=> Transfer rate: 616296 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[542/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: tm04.exe
Result: invalid
Time: 0:00:00.288659 tm04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12040 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012040
=> Loading section .init, size 0x48 lma ffffffff880120b0
=> Loading section .fini, size 0x30 lma ffffffff880120f8
=> Loading section .ctors, size 0x8 lma ffffffff88012128
=> Loading section .dtors, size 0x8 lma ffffffff88012130
=> Loading section .rdata, size 0x20dd lma ffffffff88012140
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014220
=> Loading section .data, size 0x438 lma ffffffff88014238
=> Start address ffffffff88000004
=> Transfer rate: 668456 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[543/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:534 W:0 | mipstx39/jmr3904: tm05.exe
Result: invalid
Time: 0:00:00.253783 tm05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf5a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f5a0
=> Loading section .init, size 0x48 lma ffffffff8800f610
=> Loading section .fini, size 0x30 lma ffffffff8800f658
=> Loading section .ctors, size 0x8 lma ffffffff8800f688
=> Loading section .dtors, size 0x8 lma ffffffff8800f690
=> Loading section .rdata, size 0x1dd9 lma ffffffff8800f6a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011480
=> Loading section .data, size 0x408 lma ffffffff88011498
=> Start address ffffffff88000004
=> Transfer rate: 574600 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[544/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:537 W:0 | mipstx39/jmr3904: tm06.exe
Result: invalid
Time: 0:00:00.252788 tm06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe50
=> Loading section .init, size 0x48 lma ffffffff8800fec0
=> Loading section .fini, size 0x30 lma ffffffff8800ff08
=> Loading section .ctors, size 0x8 lma ffffffff8800ff38
=> Loading section .dtors, size 0x8 lma ffffffff8800ff40
=> Loading section .rdata, size 0x1e51 lma ffffffff8800ff50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011da8
=> Loading section .data, size 0x408 lma ffffffff88011dc0
=> Start address ffffffff88000004
=> Transfer rate: 593352 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[545/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:539 W:0 | mipstx39/jmr3904: tm07.exe
Result: invalid
Time: 0:00:00.255620 tm07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf8e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f8e0
=> Loading section .init, size 0x48 lma ffffffff8800f950
=> Loading section .fini, size 0x30 lma ffffffff8800f998
=> Loading section .ctors, size 0x8 lma ffffffff8800f9c8
=> Loading section .dtors, size 0x8 lma ffffffff8800f9d0
=> Loading section .rdata, size 0x1db1 lma ffffffff8800f9e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011798
=> Loading section .data, size 0x408 lma ffffffff880117b0
=> Start address ffffffff88000004
=> Transfer rate: 580936 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[546/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:539 W:0 | mipstx39/jmr3904: tm08.exe
Result: invalid
Time: 0:00:00.254065 tm08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d70
=> Loading section .init, size 0x48 lma ffffffff88010de0
=> Loading section .fini, size 0x30 lma ffffffff88010e28
=> Loading section .ctors, size 0x8 lma ffffffff88010e58
=> Loading section .dtors, size 0x8 lma ffffffff88010e60
=> Loading section .rdata, size 0x1fa1 lma ffffffff88010e70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e18
=> Loading section .data, size 0x440 lma ffffffff88012e30
=> Start address ffffffff88000004
=> Transfer rate: 627464 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[547/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:539 W:0 | mipstx39/jmr3904: tm09.exe
Result: invalid
Time: 0:00:00.258035 tm09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108a0
=> Loading section .init, size 0x48 lma ffffffff88010910
=> Loading section .fini, size 0x30 lma ffffffff88010958
=> Loading section .ctors, size 0x8 lma ffffffff88010988
=> Loading section .dtors, size 0x8 lma ffffffff88010990
=> Loading section .rdata, size 0x1ef5 lma ffffffff880109a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012898
=> Loading section .data, size 0x438 lma ffffffff880128b0
=> Start address ffffffff88000004
=> Transfer rate: 616168 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[548/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm10.exe
Result: invalid
Time: 0:00:00.254206 tm10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10240 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010240
=> Loading section .init, size 0x48 lma ffffffff880102b0
=> Loading section .fini, size 0x30 lma ffffffff880102f8
=> Loading section .ctors, size 0x8 lma ffffffff88010328
=> Loading section .dtors, size 0x8 lma ffffffff88010330
=> Loading section .rdata, size 0x1e45 lma ffffffff88010340
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012188
=> Loading section .data, size 0x438 lma ffffffff880121a0
=> Start address ffffffff88000004
=> Transfer rate: 601704 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[549/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:544 W:0 | mipstx39/jmr3904: tm11.exe
Result: invalid
Time: 0:00:00.273265 tm11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105c0
=> Loading section .init, size 0x48 lma ffffffff88010630
=> Loading section .fini, size 0x30 lma ffffffff88010678
=> Loading section .ctors, size 0x8 lma ffffffff880106a8
=> Loading section .dtors, size 0x8 lma ffffffff880106b0
=> Loading section .rdata, size 0x1e35 lma ffffffff880106c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124f8
=> Loading section .data, size 0x438 lma ffffffff88012510
=> Start address ffffffff88000004
=> Transfer rate: 608744 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[550/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:545 W:0 | mipstx39/jmr3904: tm12.exe
Result: invalid
Time: 0:00:00.275229 tm12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10610 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010610
=> Loading section .init, size 0x48 lma ffffffff88010680
=> Loading section .fini, size 0x30 lma ffffffff880106c8
=> Loading section .ctors, size 0x8 lma ffffffff880106f8
=> Loading section .dtors, size 0x8 lma ffffffff88010700
=> Loading section .rdata, size 0x1e35 lma ffffffff88010710
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012548
=> Loading section .data, size 0x438 lma ffffffff88012560
=> Start address ffffffff88000004
=> Transfer rate: 609384 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[551/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:545 W:0 | mipstx39/jmr3904: tm13.exe
Result: invalid
Time: 0:00:00.254706 tm13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105c0
=> Loading section .init, size 0x48 lma ffffffff88010630
=> Loading section .fini, size 0x30 lma ffffffff88010678
=> Loading section .ctors, size 0x8 lma ffffffff880106a8
=> Loading section .dtors, size 0x8 lma ffffffff880106b0
=> Loading section .rdata, size 0x1e35 lma ffffffff880106c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124f8
=> Loading section .data, size 0x438 lma ffffffff88012510
=> Start address ffffffff88000004
=> Transfer rate: 608744 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[552/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:546 W:0 | mipstx39/jmr3904: tm14.exe
Result: invalid
Time: 0:00:00.258674 tm14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10600 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010600
=> Loading section .init, size 0x48 lma ffffffff88010670
=> Loading section .fini, size 0x30 lma ffffffff880106b8
=> Loading section .ctors, size 0x8 lma ffffffff880106e8
=> Loading section .dtors, size 0x8 lma ffffffff880106f0
=> Loading section .rdata, size 0x1e35 lma ffffffff88010700
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012538
=> Loading section .data, size 0x438 lma ffffffff88012550
=> Start address ffffffff88000004
=> Transfer rate: 609256 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[553/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:546 W:0 | mipstx39/jmr3904: tm15.exe
Result: invalid
Time: 0:00:00.267128 tm15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfa80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fa80
=> Loading section .init, size 0x48 lma ffffffff8800faf0
=> Loading section .fini, size 0x30 lma ffffffff8800fb38
=> Loading section .ctors, size 0x8 lma ffffffff8800fb68
=> Loading section .dtors, size 0x8 lma ffffffff8800fb70
=> Loading section .rdata, size 0x1ec1 lma ffffffff8800fb80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a48
=> Loading section .data, size 0x408 lma ffffffff88011a60
=> Start address ffffffff88000004
=> Transfer rate: 586440 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[554/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:546 W:0 | mipstx39/jmr3904: tm16.exe
Result: invalid
Time: 0:00:00.281591 tm16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf950 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f950
=> Loading section .init, size 0x48 lma ffffffff8800f9c0
=> Loading section .fini, size 0x30 lma ffffffff8800fa08
=> Loading section .ctors, size 0x8 lma ffffffff8800fa38
=> Loading section .dtors, size 0x8 lma ffffffff8800fa40
=> Loading section .rdata, size 0x1df9 lma ffffffff8800fa50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011850
=> Loading section .data, size 0x408 lma ffffffff88011868
=> Start address ffffffff88000004
=> Transfer rate: 582408 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[555/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:546 W:0 | mipstx39/jmr3904: tm17.exe
Result: invalid
Time: 0:00:00.277456 tm17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf6e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f6e0
=> Loading section .init, size 0x48 lma ffffffff8800f750
=> Loading section .fini, size 0x30 lma ffffffff8800f798
=> Loading section .ctors, size 0x8 lma ffffffff8800f7c8
=> Loading section .dtors, size 0x8 lma ffffffff8800f7d0
=> Loading section .rdata, size 0x1db9 lma ffffffff8800f7e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115a0
=> Loading section .data, size 0x408 lma ffffffff880115b8
=> Start address ffffffff88000004
=> Transfer rate: 576904 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[556/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm18.exe
Result: invalid
Time: 0:00:00.253078 tm18.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf340 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f340
=> Loading section .init, size 0x48 lma ffffffff8800f3b0
=> Loading section .fini, size 0x30 lma ffffffff8800f3f8
=> Loading section .ctors, size 0x8 lma ffffffff8800f428
=> Loading section .dtors, size 0x8 lma ffffffff8800f430
=> Loading section .rdata, size 0x1da9 lma ffffffff8800f440
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880111f0
=> Loading section .data, size 0x408 lma ffffffff88011208
=> Start address ffffffff88000004
=> Transfer rate: 569352 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[557/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm19.exe
Result: invalid
Time: 0:00:00.260454 tm19.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe30
=> Loading section .init, size 0x48 lma ffffffff8800fea0
=> Loading section .fini, size 0x30 lma ffffffff8800fee8
=> Loading section .ctors, size 0x8 lma ffffffff8800ff18
=> Loading section .dtors, size 0x8 lma ffffffff8800ff20
=> Loading section .rdata, size 0x1f09 lma ffffffff8800ff30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e40
=> Loading section .data, size 0x408 lma ffffffff88011e58
=> Start address ffffffff88000004
=> Transfer rate: 594568 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[558/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm20.exe
Result: invalid
Time: 0:00:00.256328 tm20.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11790 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011790
=> Loading section .init, size 0x48 lma ffffffff88011810
=> Loading section .fini, size 0x30 lma ffffffff88011858
=> Loading section .ctors, size 0x8 lma ffffffff88011888
=> Loading section .dtors, size 0x8 lma ffffffff88011890
=> Loading section .rdata, size 0x21b5 lma ffffffff880118a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a58
=> Loading section .data, size 0x480 lma ffffffff88013a70
=> Start address ffffffff88000004
=> Transfer rate: 653096 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[559/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:554 W:0 | mipstx39/jmr3904: tm21.exe
Result: invalid
Time: 0:00:00.266168 tm21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff88011140
=> Loading section .init, size 0x48 lma ffffffff880111d0
=> Loading section .fini, size 0x30 lma ffffffff88011218
=> Loading section .ctors, size 0x8 lma ffffffff88011248
=> Loading section .dtors, size 0x8 lma ffffffff88011250
=> Loading section .rdata, size 0x1f85 lma ffffffff88011260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131e8
=> Loading section .data, size 0x558 lma ffffffff88013200
=> Start address ffffffff88000004
=> Transfer rate: 637544 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[560/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:552 W:0 | mipstx39/jmr3904: tm22.exe
Result: invalid
Time: 0:00:00.258802 tm22.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107c0
=> Loading section .init, size 0x48 lma ffffffff88010830
=> Loading section .fini, size 0x30 lma ffffffff88010878
=> Loading section .ctors, size 0x8 lma ffffffff880108a8
=> Loading section .dtors, size 0x8 lma ffffffff880108b0
=> Loading section .rdata, size 0x1f05 lma ffffffff880108c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127c8
=> Loading section .data, size 0x438 lma ffffffff880127e0
=> Start address ffffffff88000004
=> Transfer rate: 614504 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[561/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:555 W:0 | mipstx39/jmr3904: tm23.exe
Result: invalid
Time: 0:00:00.265138 tm23.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110a0
=> Loading section .init, size 0x48 lma ffffffff88011110
=> Loading section .fini, size 0x30 lma ffffffff88011158
=> Loading section .ctors, size 0x8 lma ffffffff88011188
=> Loading section .dtors, size 0x8 lma ffffffff88011190
=> Loading section .rdata, size 0x2005 lma ffffffff880111a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131a8
=> Loading section .data, size 0x470 lma ffffffff880131c0
=> Start address ffffffff88000004
=> Transfer rate: 635176 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[562/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:558 W:0 | mipstx39/jmr3904: tm24.exe
Result: invalid
Time: 0:00:00.272387 tm24.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf4a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f4a0
=> Loading section .init, size 0x48 lma ffffffff8800f510
=> Loading section .fini, size 0x30 lma ffffffff8800f558
=> Loading section .ctors, size 0x8 lma ffffffff8800f588
=> Loading section .dtors, size 0x8 lma ffffffff8800f590
=> Loading section .rdata, size 0x1e01 lma ffffffff8800f5a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113a8
=> Loading section .data, size 0x408 lma ffffffff880113c0
=> Start address ffffffff88000004
=> Transfer rate: 572872 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[563/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:558 W:0 | mipstx39/jmr3904: tm25.exe
Result: invalid
Time: 0:00:00.264819 tm25.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010700
=> Loading section .fini, size 0x30 lma ffffffff88010748
=> Loading section .ctors, size 0x8 lma ffffffff88010778
=> Loading section .dtors, size 0x8 lma ffffffff88010780
=> Loading section .rdata, size 0x1e29 lma ffffffff88010790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125c0
=> Loading section .data, size 0x448 lma ffffffff880125d8
=> Start address ffffffff88000004
=> Transfer rate: 610440 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[564/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:558 W:0 | mipstx39/jmr3904: tm26.exe
Result: invalid
Time: 0:00:00.294514 tm26.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18af0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88018af0
=> Loading section .init, size 0x48 lma ffffffff88018b60
=> Loading section .fini, size 0x30 lma ffffffff88018ba8
=> Loading section .ctors, size 0x8 lma ffffffff88018bd8
=> Loading section .dtors, size 0x8 lma ffffffff88018be0
=> Loading section .rdata, size 0x2860 lma ffffffff88018bf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b450
=> Loading section .data, size 0x5d8 lma ffffffff8801b468
=> Start address ffffffff88000004
=> Transfer rate: 905664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[565/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm27.exe
Result: invalid
Time: 0:00:00.254872 tm27.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ca0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ca0
=> Loading section .init, size 0x48 lma ffffffff88010d10
=> Loading section .fini, size 0x30 lma ffffffff88010d58
=> Loading section .ctors, size 0x8 lma ffffffff88010d88
=> Loading section .dtors, size 0x8 lma ffffffff88010d90
=> Loading section .rdata, size 0x1f39 lma ffffffff88010da0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ce0
=> Loading section .data, size 0x418 lma ffffffff88012cf8
=> Start address ffffffff88000004
=> Transfer rate: 624648 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[566/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:560 W:0 | mipstx39/jmr3904: tm28.exe
Result: invalid
Time: 0:00:00.252332 tm28.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf760 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f760
=> Loading section .init, size 0x48 lma ffffffff8800f7d0
=> Loading section .fini, size 0x30 lma ffffffff8800f818
=> Loading section .ctors, size 0x8 lma ffffffff8800f848
=> Loading section .dtors, size 0x8 lma ffffffff8800f850
=> Loading section .rdata, size 0x1e19 lma ffffffff8800f860
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011680
=> Loading section .data, size 0x438 lma ffffffff88011698
=> Start address ffffffff88000004
=> Transfer rate: 579080 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[567/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:560 W:0 | mipstx39/jmr3904: tm29.exe
Result: invalid
Time: 0:00:00.304279 tm29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103a0
=> Loading section .init, size 0x48 lma ffffffff88010410
=> Loading section .fini, size 0x30 lma ffffffff88010458
=> Loading section .ctors, size 0x8 lma ffffffff88010488
=> Loading section .dtors, size 0x8 lma ffffffff88010490
=> Loading section .rdata, size 0x1f39 lma ffffffff880104a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123e0
=> Loading section .data, size 0x438 lma ffffffff880123f8
=> Start address ffffffff88000004
=> Transfer rate: 606472 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[568/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:561 W:0 | mipstx39/jmr3904: tm30.exe
Result: invalid
Time: 0:00:00.260861 tm30.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf8a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f8a0
=> Loading section .init, size 0x48 lma ffffffff8800f910
=> Loading section .fini, size 0x30 lma ffffffff8800f958
=> Loading section .ctors, size 0x8 lma ffffffff8800f988
=> Loading section .dtors, size 0x8 lma ffffffff8800f990
=> Loading section .rdata, size 0x1e11 lma ffffffff8800f9a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117b8
=> Loading section .data, size 0x438 lma ffffffff880117d0
=> Start address ffffffff88000004
=> Transfer rate: 581576 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[569/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:561 W:0 | mipstx39/jmr3904: tm31.exe
Result: invalid
Time: 0:00:00.256601 tm31.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1ead lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123b0
=> Loading section .data, size 0x438 lma ffffffff880123c8
=> Start address ffffffff88000004
=> Transfer rate: 606120 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[570/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:565 W:0 | mipstx39/jmr3904: tm32.exe
Result: invalid
Time: 0:00:00.255776 tm32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=> Loading section .init, size 0x48 lma ffffffff880109b0
=> Loading section .fini, size 0x30 lma ffffffff880109f8
=> Loading section .ctors, size 0x8 lma ffffffff88010a28
=> Loading section .dtors, size 0x8 lma ffffffff88010a30
=> Loading section .rdata, size 0x1e75 lma ffffffff88010a40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b8
=> Loading section .data, size 0x438 lma ffffffff880128d0
=> Start address ffffffff88000004
=> Transfer rate: 616424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[571/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tm33.exe
Result: invalid
Time: 0:00:00.253081 tm33.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1ea5 lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123a8
=> Loading section .data, size 0x438 lma ffffffff880123c0
=> Start address ffffffff88000004
=> Transfer rate: 606056 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[572/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:568 W:0 | mipstx39/jmr3904: tm34.exe
Result: invalid
Time: 0:00:00.260383 tm34.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=> Loading section .init, size 0x48 lma ffffffff880109b0
=> Loading section .fini, size 0x30 lma ffffffff880109f8
=> Loading section .ctors, size 0x8 lma ffffffff88010a28
=> Loading section .dtors, size 0x8 lma ffffffff88010a30
=> Loading section .rdata, size 0x1e75 lma ffffffff88010a40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b8
=> Loading section .data, size 0x438 lma ffffffff880128d0
=> Start address ffffffff88000004
=> Transfer rate: 616424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[573/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tm35.exe
Result: invalid
Time: 0:00:00.270399 tm35.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1ead lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123b0
=> Loading section .data, size 0x438 lma ffffffff880123c8
=> Start address ffffffff88000004
=> Transfer rate: 606120 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[574/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:568 W:0 | mipstx39/jmr3904: tm36.exe
Result: invalid
Time: 0:00:00.255811 tm36.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=> Loading section .init, size 0x48 lma ffffffff880109b0
=> Loading section .fini, size 0x30 lma ffffffff880109f8
=> Loading section .ctors, size 0x8 lma ffffffff88010a28
=> Loading section .dtors, size 0x8 lma ffffffff88010a30
=> Loading section .rdata, size 0x1e75 lma ffffffff88010a40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b8
=> Loading section .data, size 0x438 lma ffffffff880128d0
=> Start address ffffffff88000004
=> Transfer rate: 616424 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[575/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:568 W:0 | mipstx39/jmr3904: tmck.exe
Result: invalid
Time: 0:00:00.266279 tmck.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf530 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f530
=> Loading section .init, size 0x48 lma ffffffff8800f5a0
=> Loading section .fini, size 0x30 lma ffffffff8800f5e8
=> Loading section .ctors, size 0x8 lma ffffffff8800f618
=> Loading section .dtors, size 0x8 lma ffffffff8800f620
=> Loading section .rdata, size 0x1eed lma ffffffff8800f630
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011520
=> Loading section .data, size 0x408 lma ffffffff88011538
=> Start address ffffffff88000004
=> Transfer rate: 575912 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[576/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:568 W:0 | mipstx39/jmr3904: tmcontext01.exe
Result: invalid
Time: 0:00:00.257167 tmcontext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100b0
=> Loading section .init, size 0x48 lma ffffffff88010120
=> Loading section .fini, size 0x30 lma ffffffff88010168
=> Loading section .ctors, size 0x8 lma ffffffff88010198
=> Loading section .dtors, size 0x8 lma ffffffff880101a0
=> Loading section .rdata, size 0x1ab1 lma ffffffff880101b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c68
=> Loading section .data, size 0x408 lma ffffffff88011c80
=> Start address ffffffff88000004
=> Transfer rate: 590792 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[577/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:568 W:0 | mipstx39/jmr3904: tmfine01.exe
Result: invalid
Time: 0:00:00.264667 tmfine01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014c30
=> Loading section .init, size 0x48 lma ffffffff88014cb0
=> Loading section .fini, size 0x30 lma ffffffff88014cf8
=> Loading section .ctors, size 0x8 lma ffffffff88014d28
=> Loading section .dtors, size 0x8 lma ffffffff88014d30
=> Loading section .rdata, size 0x1c91 lma ffffffff88014d40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169d8
=> Loading section .data, size 0x4a8 lma ffffffff880169f0
=> Start address ffffffff88000004
=> Transfer rate: 750664 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[578/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: tmonetoone.exe
Result: invalid
Time: 0:00:00.270814 tmonetoone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11dd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011dd0
=> Loading section .init, size 0x48 lma ffffffff88011e40
=> Loading section .fini, size 0x30 lma ffffffff88011e88
=> Loading section .ctors, size 0x8 lma ffffffff88011eb8
=> Loading section .dtors, size 0x8 lma ffffffff88011ec0
=> Loading section .rdata, size 0x1aa9 lma ffffffff88011ed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013980
=> Loading section .data, size 0x448 lma ffffffff88013998
=> Start address ffffffff88000004
=> Transfer rate: 650888 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[579/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:576 W:0 | mipstx39/jmr3904: tmtimer01.exe
Result: invalid
Time: 0:00:00.256194 tmtimer01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010a50
=> Loading section .init, size 0x48 lma ffffffff88010ad0
=> Loading section .fini, size 0x30 lma ffffffff88010b18
=> Loading section .ctors, size 0x8 lma ffffffff88010b48
=> Loading section .dtors, size 0x8 lma ffffffff88010b50
=> Loading section .rdata, size 0x1af4 lma ffffffff88010b60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012658
=> Loading section .data, size 0x448 lma ffffffff88012670
=> Start address ffffffff88000004
=> Transfer rate: 611680 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[580/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:576 W:0 | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid
Time: 0:00:00.252918 ts-unit-no-clock-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf2a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800f2a0
=> Loading section .init, size 0x48 lma ffffffff8800f320
=> Loading section .fini, size 0x30 lma ffffffff8800f368
=> Loading section .ctors, size 0x8 lma ffffffff8800f398
=> Loading section .dtors, size 0x8 lma ffffffff8800f3a0
=> Loading section .rdata, size 0x4954 lma ffffffff8800f3b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d08
=> Loading section .data, size 0x248 lma ffffffff88013d20
=> Start address ffffffff88000004
=> Transfer rate: 654048 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[581/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid
Time: 0:00:00.279829 ts-fatal-init-task-construct-failed.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xcbd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800cbd0
=> Loading section .init, size 0x48 lma ffffffff8800cc50
=> Loading section .fini, size 0x30 lma ffffffff8800cc98
=> Loading section .ctors, size 0x8 lma ffffffff8800ccc8
=> Loading section .dtors, size 0x8 lma ffffffff8800ccd0
=> Loading section .rdata, size 0x18ac lma ffffffff8800cce0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e590
=> Loading section .data, size 0x22c lma ffffffff8800e5a8
=> Start address ffffffff88000004
=> Transfer rate: 474688 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[582/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:576 W:0 | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid
Time: 0:00:00.263405 ts-fatal-too-large-tls-size.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xa210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800a210
=> Loading section .init, size 0x48 lma ffffffff8800a280
=> Loading section .fini, size 0x30 lma ffffffff8800a2c8
=> Loading section .ctors, size 0x8 lma ffffffff8800a2f8
=> Loading section .dtors, size 0x8 lma ffffffff8800a300
=> Loading section .rdata, size 0x183c lma ffffffff8800a310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bb50
=> Loading section .data, size 0x204 lma ffffffff8800bb68
=> Start address ffffffff88000004
=> Transfer rate: 387840 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[583/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:576 W:0 | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid
Time: 0:00:00.254163 ts-performance-no-clock-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x175c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xa0 lma ffffffff880175c0
=> Loading section .init, size 0x48 lma ffffffff88017660
=> Loading section .fini, size 0x30 lma ffffffff880176a8
=> Loading section .ctors, size 0x8 lma ffffffff880176d8
=> Loading section .dtors, size 0x8 lma ffffffff880176e0
=> Loading section .rdata, size 0x2730 lma ffffffff880176f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019e20
=> Loading section .data, size 0x3c4 lma ffffffff88019e38
=> Start address ffffffff88000004
=> Transfer rate: 855968 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[584/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:576 W:0 | mipstx39/jmr3904: ts-terminate.exe
Result: invalid
Time: 0:00:00.256019 ts-terminate.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ac0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ac0
=> Loading section .init, size 0x48 lma ffffffff88010b30
=> Loading section .fini, size 0x30 lma ffffffff88010b78
=> Loading section .ctors, size 0x8 lma ffffffff88010ba8
=> Loading section .dtors, size 0x8 lma ffffffff88010bb0
=> Loading section .rdata, size 0x1ec0 lma ffffffff88010bc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a80
=> Loading section .data, size 0x220 lma ffffffff88012a98
=> Start address ffffffff88000004
=> Transfer rate: 615808 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[585/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:576 W:0 | mipstx39/jmr3904: ts-userext.exe
Result: invalid
Time: 0:00:00.254219 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012360
=> Loading section .init, size 0x48 lma ffffffff880123e0
=> Loading section .fini, size 0x30 lma ffffffff88012428
=> Loading section .ctors, size 0x8 lma ffffffff88012458
=> Loading section .dtors, size 0x8 lma ffffffff88012460
=> Loading section .rdata, size 0x20e8 lma ffffffff88012470
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014558
=> Loading section .data, size 0x268 lma ffffffff88014570
=> Start address ffffffff88000004
=> Transfer rate: 671360 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[586/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid
Time: 0:00:00.253627 ts-validation-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15100 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015100
=> Loading section .init, size 0x48 lma ffffffff88015180
=> Loading section .fini, size 0x30 lma ffffffff880151c8
=> Loading section .ctors, size 0x8 lma ffffffff880151f8
=> Loading section .dtors, size 0x8 lma ffffffff88015200
=> Loading section .rdata, size 0x24a8 lma ffffffff88015210
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880176b8
=> Loading section .data, size 0x39c lma ffffffff880176d0
=> Start address ffffffff88000004
=> Transfer rate: 774944 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[587/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid
Time: 0:00:00.262869 ts-validation-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ed0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011ed0
=> Loading section .init, size 0x48 lma ffffffff88011f50
=> Loading section .fini, size 0x30 lma ffffffff88011f98
=> Loading section .ctors, size 0x8 lma ffffffff88011fc8
=> Loading section .dtors, size 0x8 lma ffffffff88011fd0
=> Loading section .rdata, size 0xe3ac lma ffffffff88011fe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020390
=> Loading section .data, size 0x268 lma ffffffff880203a8
=> Start address ffffffff88000004
=> Transfer rate: 1060896 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[588/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid
Time: 0:00:00.263285 ts-validation-acfg-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xdfd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff8800dfd0
=> Loading section .init, size 0x48 lma ffffffff8800e060
=> Loading section .fini, size 0x30 lma ffffffff8800e0a8
=> Loading section .ctors, size 0x8 lma ffffffff8800e0d8
=> Loading section .dtors, size 0x8 lma ffffffff8800e0e0
=> Loading section .rdata, size 0x1c5c lma ffffffff8800e0f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800fd50
=> Loading section .data, size 0x32c lma ffffffff8800fd68
=> Start address ffffffff88000004
=> Transfer rate: 525376 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[589/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid
Time: 0:00:00.256103 ts-validation-acfg-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xc8e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800c8e0
=> Loading section .init, size 0x48 lma ffffffff8800c950
=> Loading section .fini, size 0x30 lma ffffffff8800c998
=> Loading section .ctors, size 0x8 lma ffffffff8800c9c8
=> Loading section .dtors, size 0x8 lma ffffffff8800c9d0
=> Loading section .rdata, size 0x1830 lma ffffffff8800c9e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e210
=> Loading section .data, size 0x1cc lma ffffffff8800e228
=> Start address ffffffff88000004
=> Transfer rate: 466784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[590/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid
Time: 0:00:00.274525 ts-validation-cache.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010840
=> Loading section .init, size 0x48 lma ffffffff880108c0
=> Loading section .fini, size 0x30 lma ffffffff88010908
=> Loading section .ctors, size 0x8 lma ffffffff88010938
=> Loading section .dtors, size 0x8 lma ffffffff88010940
=> Loading section .rdata, size 0x1d48 lma ffffffff88010950
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012698
=> Loading section .data, size 0x254 lma ffffffff880126b0
=> Start address ffffffff88000004
=> Transfer rate: 608224 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[591/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid
Time: 0:00:00.309416 ts-validation-intr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x172a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb0 lma ffffffff880172a0
=> Loading section .init, size 0x48 lma ffffffff88017350
=> Loading section .fini, size 0x30 lma ffffffff88017398
=> Loading section .ctors, size 0x8 lma ffffffff880173c8
=> Loading section .dtors, size 0x8 lma ffffffff880173d0
=> Loading section .rdata, size 0x4478 lma ffffffff880173e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b858
=> Loading section .data, size 0x438 lma ffffffff8801b870
=> Start address ffffffff88000004
=> Transfer rate: 910592 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[592/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid
Time: 0:00:00.265283 ts-validation-io-kernel.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x9030 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff88009030
=> Loading section .init, size 0x48 lma ffffffff88009090
=> Loading section .fini, size 0x30 lma ffffffff880090d8
=> Loading section .ctors, size 0x8 lma ffffffff88009108
=> Loading section .dtors, size 0x8 lma ffffffff88009110
=> Loading section .rdata, size 0x1728 lma ffffffff88009120
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a848
=> Loading section .data, size 0x7c lma ffffffff8800a860
=> Start address ffffffff88000004
=> Transfer rate: 345760 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[593/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:584 W:0 | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid
Time: 0:00:00.251640 ts-validation-no-clock-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x4a0a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x240 lma ffffffff8804a0a0
=> Loading section .init, size 0x48 lma ffffffff8804a2e0
=> Loading section .fini, size 0x30 lma ffffffff8804a328
=> Loading section .ctors, size 0x8 lma ffffffff8804a358
=> Loading section .dtors, size 0x8 lma ffffffff8804a360
=> Loading section .rdata, size 0x19b94 lma ffffffff8804a370
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88063f08
=> Loading section .data, size 0x1358 lma ffffffff88063f20
=> Loading section .rtemsrwset, size 0x4 lma ffffffff88065278
=> Start address ffffffff88000004
=> Transfer rate: 3314560 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[594/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:585 W:0 | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid
Time: 0:00:00.255840 ts-validation-non-smp.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880100f0
=> Loading section .init, size 0x48 lma ffffffff88010170
=> Loading section .fini, size 0x30 lma ffffffff880101b8
=> Loading section .ctors, size 0x8 lma ffffffff880101e8
=> Loading section .dtors, size 0x8 lma ffffffff880101f0
=> Loading section .rdata, size 0x1dc0 lma ffffffff88010200
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fc0
=> Loading section .data, size 0x264 lma ffffffff88011fd8
=> Start address ffffffff88000004
=> Transfer rate: 594336 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[595/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:593 W:0 | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid
Time: 0:00:00.254129 ts-validation-one-cpu-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1b460 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xc0 lma ffffffff8801b460
=> Loading section .init, size 0x48 lma ffffffff8801b520
=> Loading section .fini, size 0x30 lma ffffffff8801b568
=> Loading section .ctors, size 0x8 lma ffffffff8801b598
=> Loading section .dtors, size 0x8 lma ffffffff8801b5a0
=> Loading section .rdata, size 0x5f48 lma ffffffff8801b5b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880214f8
=> Loading section .data, size 0x484 lma ffffffff88021510
=> Start address ffffffff88000004
=> Transfer rate: 1100896 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[596/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:593 W:0 | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid
Time: 0:00:00.255956 ts-validation-one-cpu-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10880 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010880
=> Loading section .init, size 0x48 lma ffffffff880108f0
=> Loading section .fini, size 0x30 lma ffffffff88010938
=> Loading section .ctors, size 0x8 lma ffffffff88010968
=> Loading section .dtors, size 0x8 lma ffffffff88010970
=> Loading section .rdata, size 0xe3a4 lma ffffffff88010980
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ed28
=> Loading section .data, size 0x24c lma ffffffff8801ed40
=> Start address ffffffff88000004
=> Transfer rate: 1014784 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[597/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:593 W:0 | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid
Time: 0:00:00.269783 ts-validation-timecounter-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x118a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880118a0
=> Loading section .init, size 0x48 lma ffffffff88011910
=> Loading section .fini, size 0x30 lma ffffffff88011958
=> Loading section .ctors, size 0x8 lma ffffffff88011988
=> Loading section .dtors, size 0x8 lma ffffffff88011990
=> Loading section .rdata, size 0x23b4 lma ffffffff880119a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d58
=> Loading section .data, size 0x248 lma ffffffff88013d70
=> Start address ffffffff88000004
=> Transfer rate: 654688 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[598/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:593 W:0 | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid
Time: 0:00:00.254482 ts-validation-timecounter-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13600 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013600
=> Loading section .init, size 0x48 lma ffffffff88013680
=> Loading section .fini, size 0x30 lma ffffffff880136c8
=> Loading section .ctors, size 0x8 lma ffffffff880136f8
=> Loading section .dtors, size 0x8 lma ffffffff88013700
=> Loading section .rdata, size 0x1e50 lma ffffffff88013710
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015560
=> Loading section .data, size 0x2fc lma ffffffff88015578
=> Start address ffffffff88000004
=> Transfer rate: 705376 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[599/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:593 W:0 | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid
Time: 0:00:00.266951 ts-validation-tls-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880100b0
=> Loading section .init, size 0x48 lma ffffffff88010130
=> Loading section .fini, size 0x30 lma ffffffff88010178
=> Loading section .ctors, size 0x8 lma ffffffff880101a8
=> Loading section .dtors, size 0x8 lma ffffffff880101b0
=> Loading section .rdata, size 0x1d5c lma ffffffff880101c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f20
=> Loading section .tdata, size 0x10 lma ffffffff88012000
=> Loading section .data, size 0x254 lma ffffffff88012100
=> Start address ffffffff88000004
=> Transfer rate: 593024 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[600/600] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:593 W:0 | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid
Time: 0:00:00.252419 ts-validation-tls-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xa1a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800a1a0
=> Loading section .init, size 0x48 lma ffffffff8800a220
=> Loading section .fini, size 0x30 lma ffffffff8800a268
=> Loading section .ctors, size 0x8 lma ffffffff8800a298
=> Loading section .dtors, size 0x8 lma ffffffff8800a2a0
=> Loading section .rdata, size 0x1880 lma ffffffff8800a2b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bb30
=> Loading section .tdata, size 0x10 lma ffffffff8800bc00
=> Loading section .data, size 0x20c lma ffffffff8800bd00
=> Start address ffffffff88000004
=> Transfer rate: 387808 bits in <1 sec.
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
Passed: 1
Failed: 0
User Input: 0
Expected Fail: 0
Indeterminate: 0
Benchmark: 0
Timeout: 0
Test too long: 0
Invalid: 599
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 600
Invalid:
sptasknopreempt01.exe
block05.exe
block15.exe
sp08.exe
paranoia.exe
psxkey09.exe
whetstone.exe
psxtmrwlock01.exe
termios.exe
fsdosfsname02.exe
psx13.exe
spversion01.exe
spclock_err02.exe
mrfs_fsrename.exe
block16.exe
mimfs_fspermission.exe
mdosfs_fserror.exe
sptimer_err02.exe
termios06.exe
sp32.exe
psxglobalcon02.exe
tar01.exe
spfatal10.exe
heapwalk.exe
psxclock01.exe
sp71.exe
psxtmmutex07.exe
ts-userext.exe
psxkey10.exe
ts-validation-timecounter-1.exe
psxtmcond02.exe
tm31.exe
tftpfs.exe
psxcond01.exe
block13.exe
tm27.exe
psxclockrealtime01.exe
psxautoinit01.exe
sp47.exe
mdosfs_fsstatvfs.exe
jffs2_fstime.exe
psxtmcond06.exe
ts-validation-acfg-0.exe
imfs_fslink.exe
sp74.exe
mrfs_fstime.exe
spcbssched02.exe
sptimespec01.exe
sparsedisk01.exe
tm19.exe
psxualarm.exe
psxtmthread01.exe
tm06.exe
rbheap01.exe
spconfig02.exe
spcontext01.exe
sp19.exe
dl07.exe
psxstrsignal01.exe
spsem_err02.exe
spmsgq_err01.exe
block04.exe
cdtest.exe
spglobalcon02.exe
psxid01.exe
dumpbuf01.exe
psxtmclocknanosleep01.exe
psxfilelock01.exe
psxtmmqrcvblock01.exe
termios01.exe
sp59.exe
getentropy01.exe
psxtmbarrier03.exe
psxtmsem02.exe
psx15.exe
complex.exe
psxstat.exe
psxitimer.exe
sptimecounter03.exe
mimfs_fsscandir01.exe
imfs_fssymlink.exe
ttest01.exe
sp03.exe
dl01.exe
spmsgq_err02.exe
stringto01.exe
sprmsched02.exe
devnullfatal01.exe
mdosfs_fsrdwr.exe
sp24.exe
mimfs_fssymlink.exe
psxsignal08.exe
pwdgrp01.exe
psxstack01.exe
psximfs01.exe
psxtmmq01.exe
exit02.exe
spcache01.exe
jffs2_fsrdwr.exe
psxtmsem04.exe
psxpasswd02.exe
sprmsched01.exe
sperror02.exe
psxrwlock01.exe
mimfs_fstime.exe
sptls04.exe
psxtmthread06.exe
psxtmkey02.exe
spconsole01.exe
sp40.exe
psxtmcleanup01.exe
sptask_err02.exe
psxalarm01.exe
top.exe
spcbssched01.exe
psxconfstr.exe
mimfs_fslink.exe
psxtmthread05.exe
sp20.exe
psxtmbarrier01.exe
spcpucounter01.exe
mouse01.exe
spsimplesched03.exe
sp49.exe
psxthreadname01.exe
sp75.exe
psxcancel.exe
psx10.exe
spfatal33.exe
sperror01.exe
psxtmmutexattr01.exe
sp77.exe
psxconcurrency01.exe
psxtmthread04.exe
pwdgrp02.exe
tm25.exe
psx11.exe
spedfsched04.exe
psxtmrwlock07.exe
fsclose01.exe
spfatal14.exe
tm08.exe
psxtmsem03.exe
speventsystem01.exe
psxstack02.exe
ts-validation-timecounter-0.exe
fileio.exe
tmtimer01.exe
sp27.exe
psxtmmutex04.exe
jffs2_fssymlink.exe
psx03.exe
psxcancel01.exe
psxautoinit02.exe
block03.exe
rhtaskswitch.exe
psxtmmutex05.exe
termios04.exe
ts-validation-tls-1.exe
psx02.exe
psxtmsleep01.exe
psxclassic01.exe
spatomic01.exe
sp07.exe
tm35.exe
spfifo01.exe
termios07.exe
psxfile02.exe
mimfs_fsrename.exe
psxsignal03.exe
rcxx01.exe
spprintk.exe
linpack.exe
spchain.exe
sp68.exe
psxsem01.exe
psxmutexattr01.exe
dl04.exe
sp60.exe
sp45.exe
mrfs_fsrdwr.exe
sp72.exe
spprivenv01.exe
sp34.exe
irqs01.exe
block17.exe
spedfsched02.exe
spstdthreads01.exe
sha.exe
ts-validation-one-cpu-0.exe
md501.exe
psxkey02.exe
fsnofs01.exe
tm11.exe
sp55.exe
termios09.exe
mrfs_fssymlink.exe
tm15.exe
sp15.exe
ts-validation-one-cpu-1.exe
spfatal15.exe
tar02.exe
sp29.exe
spunlimited01.exe
psxsignal05.exe
tztest.exe
psxgetattrnp01.exe
sptask_err03.exe
psxtimer01.exe
psxtmthread03.exe
psxaio02.exe
psxspin01.exe
fsimfsconfig03.exe
bspcmdline01.exe
imfs_fspatheval.exe
tm24.exe
mathf.exe
spfreechain01.exe
jffs2_fspatheval.exe
spstkalloc03.exe
psxtime.exe
fsdosfswrite01.exe
fsdosfssync01.exe
tmcontext01.exe
psxcleanup.exe
psxtmcond04.exe
psxkey05.exe
sp37.exe
ts-terminate.exe
capture01.exe
tm17.exe
spfifo05.exe
psxinttypes01.exe
malloc02.exe
psxtmsem05.exe
spclock_err01.exe
psxtmmutex02.exe
fsdosfsformat01.exe
sp23.exe
psx05.exe
psxmsgq01.exe
mrfs_fserror.exe
ts-performance-no-clock-0.exe
ts-validation-acfg-1.exe
spport_err01.exe
psxtmsem01.exe
block02.exe
tm01.exe
psxchroot01.exe
sp63.exe
spprofiling01.exe
psxtmrwlock05.exe
uid01.exe
psxtmcond05.exe
tmfine01.exe
mdosfs_fstime.exe
malloctest.exe
psxmmap01.exe
cpuuse.exe
sp62.exe
psxdevctl01.exe
spfatal28.exe
ticker.exe
block07.exe
sp31.exe
psxmsgq03.exe
psxmsgq02.exe
mimfs_fsrdwr.exe
sp41.exe
tm36.exe
spfatal12.exe
imfs_fstime.exe
jffs2_fslink.exe
termios03.exe
malloc03.exe
psxsignal02.exe
sp65.exe
psxobj01.exe
psxfile01.exe
psxeintr_join.exe
spinternalerror01.exe
termios08.exe
mdosfs_fspatheval.exe
fsimfsconfig01.exe
spsem03.exe
spfatal05.exe
psxtmrwlock03.exe
tm13.exe
psxkey06.exe
sppartition_err01.exe
jffs2_fspermission.exe
sp11.exe
sp17.exe
dl09.exe
spedfsched01.exe
spfatal01.exe
sp70.exe
psxfchx01.exe
sptimecounter01.exe
fsrofs01.exe
record01.exe
psxglobalcon01.exe
psxtmkey01.exe
psxtmonce01.exe
ts-validation-non-smp.exe
sprbtree01.exe
spthreadq01.exe
sppagesize.exe
spfatal30.exe
psx04.exe
fsrfsbitmap01.exe
psxtmmutex03.exe
mrfs_fspermission.exe
tm33.exe
tmonetoone.exe
psxtmmqrcvblock02.exe
sp56.exe
tm28.exe
jffs2_fserror.exe
psx07.exe
tm07.exe
fsjffs2gc01.exe
sp33.exe
sptask_err01.exe
sp76.exe
i2c01.exe
nsecs.exe
tm20.exe
sptls03.exe
psxtmmutex06.exe
spconfig01.exe
psxtmrwlock06.exe
psx01.exe
spstkalloc.exe
sp12.exe
spheapprot.exe
spsyslock01.exe
psxtmnanosleep02.exe
psxtmclocknanosleep02.exe
spsimplesched01.exe
psxrdwrv.exe
psxtmthread02.exe
spsignal_err01.exe
fsimfsgeneric01.exe
spmkdir.exe
spwkspace.exe
mrfs_fslink.exe
psxgetrusage01.exe
sp2038.exe
spsimplesched02.exe
sp25.exe
sp35.exe
sptask_err04.exe
rhilatency.exe
psxkey07.exe
sp43.exe
dl06.exe
sp18.exe
spfatal09.exe
jffs2_fsscandir01.exe
tm22.exe
imfs_fsrdwr.exe
sp01.exe
spi01.exe
psxfatal02.exe
ts-unit-no-clock-0.exe
libfdt01.exe
dl02.exe
sp26.exe
psxfenv01.exe
stackchk.exe
tm09.exe
sptimecounter02.exe
spfatal11.exe
psx14.exe
spfifo04.exe
sp57.exe
block12.exe
tm30.exe
stackchk02.exe
psxndbm01.exe
spcpuset01.exe
tm14.exe
mrfs_fsfpathconf.exe
psxtmcond01.exe
sp13.exe
iostream.exe
rtmonuse.exe
spstkalloc02.exe
psxfatal01.exe
psxtmthreadattr01.exe
sptls01.exe
psxkey01.exe
spratemon_err01.exe
spntp01.exe
putenvtest.exe
psxshm02.exe
psxtmclocknanosleep03.exe
psxaio01.exe
ts-fatal-too-large-tls-size.exe
block09.exe
psxbarrier01.exe
spregion_err01.exe
unlimited.exe
psxtmcond09.exe
mdosfs_fsscandir01.exe
sp21.exe
psxkey03.exe
mimfs_fserror.exe
psxpipe01.exe
psxtimer_face01.exe
ts-validation-io-kernel.exe
psxconfig01.exe
spcbssched03.exe
sp50.exe
psxtmcond10.exe
psxtmbarrierattr01.exe
deviceio01.exe
block11.exe
psxmsgq04.exe
sp69.exe
spclock_todhook01.exe
spfifo02.exe
spthread01.exe
sp42.exe
sp02.exe
dl10.exe
spfatal29.exe
spfatal31.exe
psxshm01.exe
sp30.exe
monitor.exe
sp14.exe
tm10.exe
spmountmgr01.exe
rhsemshuffle.exe
ts-validation-1.exe
psxsignal06.exe
fsfseeko01.exe
block10.exe
termios05.exe
spsize.exe
tm03.exe
rhtaskpreempt.exe
exit03.exe
psxtmbarrier04.exe
sp52.exe
sp06.exe
sptimecounter04.exe
spthreadlife01.exe
devfs01.exe
spsem_err01.exe
ts-validation-intr.exe
psxcleanup01.exe
defaultconfig01.exe
psxsignal07.exe
spobjgetnext.exe
psxftw01.exe
ts-validation-tls-0.exe
termios10.exe
imfs_fspermission.exe
fsimfsconfig02.exe
psx06.exe
tm05.exe
devfs04.exe
rhmlatency.exe
psxtmmutex01.exe
sptimerserver01.exe
spedfsched03.exe
psxcleanup02.exe
psx08.exe
psx09.exe
sp46.exe
sp54.exe
tar03.exe
base_sp.exe
dl03.exe
rhdeadlockbrk.exe
spintr_err01.exe
spmisc01.exe
spfatal03.exe
psxenosys.exe
sp48.exe
fsdosfsname01.exe
spmutex01.exe
psxsignal04.exe
spevent_err03.exe
spsysinit01.exe
block08.exe
spfatal32.exe
mimfs_fspatheval.exe
block14.exe
stackchk01.exe
spfifo03.exe
dhrystone.exe
mathl.exe
spassoc01.exe
math.exe
psxtimer02.exe
tm02.exe
sptls02.exe
psx16.exe
spscheduler01.exe
sppps01.exe
spwatchdog.exe
ttest02.exe
tmck.exe
spcxx01.exe
tm21.exe
shell01.exe
sp66.exe
spstdc17.exe
psxkey08.exe
tm16.exe
splinkersets01.exe
sppercpudata01.exe
psxcond02.exe
tm34.exe
sp73.exe
psxtmcond03.exe
sp27a.exe
tm12.exe
sp04.exe
spfatal34.exe
tm18.exe
sp53.exe
flashdisk01.exe
psx12.exe
psxtmbarrier02.exe
spsem02.exe
psxkey04.exe
sp67.exe
sp51.exe
sperror03.exe
imfs_fsscandir01.exe
spmrsp01.exe
psxreaddir.exe
mrfs_fspatheval.exe
malloc04.exe
tm23.exe
block06.exe
ts-validation-no-clock-0.exe
sp22.exe
exit01.exe
record02.exe
utf8proc01.exe
sp44.exe
dl08.exe
sp16.exe
crypt01.exe
spqreslib.exe
psxtmsleep02.exe
tm32.exe
spnsext01.exe
capture.exe
spsem01.exe
imfs_fserror.exe
tm26.exe
psxonce01.exe
psxsysconf.exe
sp58.exe
sp05.exe
newlib01.exe
spglobalcon01.exe
spinternalerror02.exe
psxclock.exe
spextensions01.exe
sp64.exe
psxaio03.exe
psxpasswd01.exe
psxsignal01.exe
ofw01.exe
psxmount.exe
psxtmcond08.exe
psxtimes01.exe
psximfs02.exe
hello.exe
termios11.exe
ts-validation-cache.exe
mrfs_fsscandir01.exe
psxtmrwlock02.exe
spfatal04.exe
ts-validation-0.exe
tm29.exe
psxtmcond07.exe
psxtmrwlock04.exe
psxtmnanosleep01.exe
speventtransient01.exe
dl05.exe
block01.exe
spstkalloc04.exe
sp38.exe
termios02.exe
ts-fatal-init-task-construct-failed.exe
monitor02.exe
psxusleep.exe
sptimer_err01.exe
fsbdpart01.exe
tm04.exe
Average test time: 0:00:00.058966
Testing time : 0:00:35.379984
More information about the build
mailing list