[rtems-test] mipstx39/jmr3904: : Passed:1 Failed:0 Timeout:0 Test-Too-long:0 Invalid:595 Wrong:0
OAR Tester
rtems-tester at oarcorp.com
Sat Jun 11 23:16:22 UTC 2022
Testing time : 0:00:42.151956
Average test time: 0:00:00.070725
Host
====
FreeBSD-12.2-RELEASE-amd64-64bit-ELF (FreeBSD VM-FreeBSD12 12.2-RELEASE FreeBSD 12.2-RELEASE r366954 GENERIC amd64 amd64)
Configuration
=============
Version: Not present in test
Build : Not present in test
Tools : Not present in test
Summary
=======
Passed: 1
Failed: 0
User Input: 0
Expected Fail: 0
Indeterminate: 0
Benchmark: 0
Timeout: 0
Test too long: 0
Invalid: 595
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 596
Invalid:
linpack.exe
whetstone.exe
fsdosfsformat01.exe
fsdosfsname02.exe
fsbdpart01.exe
dhrystone.exe
fsdosfsname01.exe
fsclose01.exe
fsdosfswrite01.exe
fsfseeko01.exe
fsdosfssync01.exe
fsimfsconfig03.exe
fsimfsconfig02.exe
fsimfsconfig01.exe
fsimfsgeneric01.exe
fsjffs2gc01.exe
fsrfsbitmap01.exe
fsnofs01.exe
fsrofs01.exe
imfs_fslink.exe
imfs_fsrdwr.exe
imfs_fspatheval.exe
imfs_fserror.exe
imfs_fspermission.exe
jffs2_fserror.exe
imfs_fsscandir01.exe
jffs2_fspermission.exe
jffs2_fslink.exe
imfs_fssymlink.exe
jffs2_fspatheval.exe
imfs_fstime.exe
jffs2_fsrdwr.exe
jffs2_fssymlink.exe
mdosfs_fsrdwr.exe
mdosfs_fspatheval.exe
jffs2_fstime.exe
jffs2_fsscandir01.exe
mdosfs_fsstatvfs.exe
mdosfs_fserror.exe
mdosfs_fsscandir01.exe
mdosfs_fstime.exe
mimfs_fserror.exe
mimfs_fsscandir01.exe
mimfs_fsrdwr.exe
mimfs_fspermission.exe
mimfs_fsrename.exe
mimfs_fslink.exe
mimfs_fspatheval.exe
mimfs_fssymlink.exe
mrfs_fserror.exe
mimfs_fstime.exe
mrfs_fsfpathconf.exe
mrfs_fslink.exe
mrfs_fspermission.exe
mrfs_fsrdwr.exe
mrfs_fspatheval.exe
block04.exe
block03.exe
block01.exe
mrfs_fsrename.exe
mrfs_fstime.exe
mrfs_fssymlink.exe
mrfs_fsscandir01.exe
block02.exe
block05.exe
block10.exe
block09.exe
block08.exe
block06.exe
block07.exe
block11.exe
block12.exe
block16.exe
block13.exe
block14.exe
bspcmdline01.exe
block17.exe
block15.exe
complex.exe
capture01.exe
dl01.exe
defaultconfig01.exe
crypt01.exe
cpuuse.exe
devfs01.exe
devnullfatal01.exe
deviceio01.exe
devfs04.exe
dl05.exe
dl04.exe
dl09.exe
dl08.exe
dl02.exe
dl07.exe
dl03.exe
dl06.exe
dl10.exe
dumpbuf01.exe
heapwalk.exe
exit01.exe
exit03.exe
exit02.exe
flashdisk01.exe
getentropy01.exe
i2c01.exe
malloc04.exe
malloc02.exe
math.exe
malloctest.exe
irqs01.exe
malloc03.exe
libfdt01.exe
mathl.exe
md501.exe
newlib01.exe
mathf.exe
monitor02.exe
monitor.exe
mouse01.exe
ofw01.exe
rtmonuse.exe
rbheap01.exe
record01.exe
rcxx01.exe
putenvtest.exe
pwdgrp01.exe
pwdgrp02.exe
record02.exe
sparsedisk01.exe
spi01.exe
stackchk.exe
sha.exe
shell01.exe
stackchk02.exe
stringto01.exe
stackchk01.exe
tar01.exe
termios.exe
tar03.exe
termios01.exe
termios03.exe
tar02.exe
termios04.exe
termios02.exe
termios07.exe
termios08.exe
termios06.exe
termios11.exe
termios10.exe
termios09.exe
termios05.exe
top.exe
psx01.exe
psx02.exe
tztest.exe
ttest02.exe
uid01.exe
ttest01.exe
utf8proc01.exe
psx03.exe
psx09.exe
psx04.exe
psx05.exe
psx11.exe
psx08.exe
psx07.exe
psx06.exe
psx10.exe
psx14.exe
psx16.exe
psxaio03.exe
psx13.exe
psx12.exe
psxaio02.exe
psxaio01.exe
psx15.exe
psxautoinit01.exe
psxalarm01.exe
psxbarrier01.exe
psxchroot01.exe
psxautoinit02.exe
psxclassic01.exe
psxcancel.exe
psxcancel01.exe
psxcleanup01.exe
psxconcurrency01.exe
psxcleanup.exe
psxcond01.exe
psxclock01.exe
psxclockrealtime01.exe
psxcleanup02.exe
psxclock.exe
psxcond02.exe
psxconfig01.exe
psxenosys.exe
psxfatal02.exe
psxfatal01.exe
psxeintr_join.exe
psxconfstr.exe
psxdevctl01.exe
psxfchx01.exe
psxfile01.exe
psxfenv01.exe
psxfile02.exe
psxgetattrnp01.exe
psxgetrusage01.exe
psxfilelock01.exe
psxftw01.exe
psxinttypes01.exe
psxitimer.exe
psxkey01.exe
psxglobalcon01.exe
psximfs02.exe
psxglobalcon02.exe
psximfs01.exe
psxid01.exe
psxkey02.exe
psxkey08.exe
psxkey04.exe
psxkey03.exe
psxkey07.exe
psxkey05.exe
psxkey09.exe
psxkey06.exe
psxkey10.exe
psxmutexattr01.exe
psxmsgq03.exe
psxmsgq04.exe
psxmsgq02.exe
psxmmap01.exe
psxmsgq01.exe
psxmount.exe
psxonce01.exe
psxpasswd02.exe
psxndbm01.exe
psxreaddir.exe
psxpipe01.exe
psxobj01.exe
psxrdwrv.exe
psxpasswd01.exe
psxshm02.exe
psxsignal04.exe
psxrwlock01.exe
psxsignal01.exe
psxsignal02.exe
psxsignal03.exe
psxshm01.exe
psxsem01.exe
psxsignal08.exe
psxsignal06.exe
psxstat.exe
psxsignal05.exe
psxsignal07.exe
psxstack02.exe
psxspin01.exe
psxstack01.exe
psxtimes01.exe
psxtimer01.exe
psxsysconf.exe
psxualarm.exe
psxstrsignal01.exe
psxtime.exe
psxtimer02.exe
psxthreadname01.exe
psxtmbarrier03.exe
psxtmcleanup01.exe
psxusleep.exe
psxtmclocknanosleep01.exe
psxtmbarrier01.exe
psxtmbarrier02.exe
psxtmbarrierattr01.exe
psxtmbarrier04.exe
psxtmclocknanosleep03.exe
psxtmcond04.exe
psxtmclocknanosleep02.exe
psxtmcond01.exe
psxtmcond06.exe
psxtmcond05.exe
psxtmcond02.exe
psxtmcond03.exe
psxtmcond08.exe
psxtmkey01.exe
psxtmcond09.exe
psxtmkey02.exe
psxtmcond10.exe
psxtmcond07.exe
psxtmmqrcvblock01.exe
psxtmmq01.exe
psxtmmutex04.exe
psxtmmutex06.exe
psxtmmutex02.exe
psxtmmutex05.exe
psxtmmutex01.exe
psxtmmutex03.exe
psxtmmutex07.exe
psxtmmqrcvblock02.exe
psxtmnanosleep02.exe
psxtmonce01.exe
psxtmrwlock01.exe
psxtmnanosleep01.exe
psxtmrwlock03.exe
psxtmrwlock02.exe
psxtmmutexattr01.exe
psxtmrwlock04.exe
psxtmrwlock07.exe
psxtmrwlock06.exe
psxtmsem04.exe
psxtmsem03.exe
psxtmsem01.exe
psxtmsem05.exe
psxtmsem02.exe
psxtmrwlock05.exe
psxtmthread01.exe
psxtmsleep01.exe
psxtmthread05.exe
psxtmthread02.exe
psxtmthread03.exe
psxtmthread04.exe
psxtmsleep02.exe
psxtmthread06.exe
rhmlatency.exe
rhilatency.exe
psxtmthreadattr01.exe
rhtaskswitch.exe
rhdeadlockbrk.exe
rhsemshuffle.exe
base_sp.exe
rhtaskpreempt.exe
capture.exe
paranoia.exe
cdtest.exe
fileio.exe
hello.exe
nsecs.exe
iostream.exe
sp01.exe
sp03.exe
ticker.exe
sp04.exe
sp05.exe
unlimited.exe
sp02.exe
sp06.exe
sp07.exe
sp14.exe
sp13.exe
sp16.exe
sp08.exe
sp12.exe
sp11.exe
sp15.exe
sp18.exe
sp2038.exe
sp21.exe
sp22.exe
sp17.exe
sp23.exe
sp20.exe
sp19.exe
sp26.exe
sp29.exe
sp31.exe
sp25.exe
sp24.exe
sp27.exe
sp30.exe
sp27a.exe
sp34.exe
sp35.exe
sp37.exe
sp38.exe
sp41.exe
sp33.exe
sp40.exe
sp32.exe
sp47.exe
sp43.exe
sp42.exe
sp44.exe
sp49.exe
sp48.exe
sp45.exe
sp46.exe
sp51.exe
sp52.exe
sp50.exe
sp54.exe
sp55.exe
sp57.exe
sp56.exe
sp53.exe
sp58.exe
sp59.exe
sp60.exe
sp62.exe
sp66.exe
sp65.exe
sp64.exe
sp63.exe
sp68.exe
sp74.exe
sp67.exe
sp69.exe
sp71.exe
sp72.exe
sp70.exe
sp73.exe
sp75.exe
spatomic01.exe
spassoc01.exe
sp77.exe
sp76.exe
spcbssched01.exe
spcache01.exe
spcbssched02.exe
spclock_err02.exe
spconfig02.exe
spconfig01.exe
spconsole01.exe
spclock_err01.exe
spchain.exe
spcbssched03.exe
spclock_todhook01.exe
spedfsched02.exe
spedfsched01.exe
spcxx01.exe
spedfsched04.exe
spcontext01.exe
spcpucounter01.exe
spcpuset01.exe
spedfsched03.exe
sperror02.exe
spfatal01.exe
spevent_err03.exe
sperror01.exe
speventsystem01.exe
sperror03.exe
spextensions01.exe
speventtransient01.exe
spfatal05.exe
spfatal09.exe
spfatal11.exe
spfatal10.exe
spfatal14.exe
spfatal04.exe
spfatal03.exe
spfatal12.exe
spfatal33.exe
spfatal29.exe
spfatal32.exe
spfatal34.exe
spfatal30.exe
spfatal28.exe
spfatal15.exe
spfatal31.exe
spfifo03.exe
spfifo01.exe
spglobalcon01.exe
spfifo05.exe
spglobalcon02.exe
spfifo04.exe
spfifo02.exe
spfreechain01.exe
spintr_err01.exe
spmisc01.exe
spinternalerror02.exe
spinternalerror01.exe
spmkdir.exe
splinkersets01.exe
spmountmgr01.exe
spheapprot.exe
sppagesize.exe
spmsgq_err01.exe
spntp01.exe
spobjgetnext.exe
spmrsp01.exe
spmutex01.exe
spnsext01.exe
spmsgq_err02.exe
spport_err01.exe
spprofiling01.exe
sppercpudata01.exe
spqreslib.exe
spprivenv01.exe
sppartition_err01.exe
spprintk.exe
sppps01.exe
spsem02.exe
spregion_err01.exe
sprbtree01.exe
spratemon_err01.exe
sprmsched01.exe
spsem01.exe
spscheduler01.exe
sprmsched02.exe
spsem03.exe
spsize.exe
spsem_err01.exe
spsignal_err01.exe
spsimplesched01.exe
spsem_err02.exe
spsimplesched03.exe
spsimplesched02.exe
spsysinit01.exe
spstkalloc.exe
spstkalloc03.exe
spstdthreads01.exe
spsyslock01.exe
sptask_err01.exe
spstkalloc04.exe
spstkalloc02.exe
sptask_err04.exe
sptask_err03.exe
sptask_err02.exe
spthreadlife01.exe
spthreadq01.exe
spthread01.exe
sptasknopreempt01.exe
sptimecounter01.exe
sptimer_err02.exe
sptimer_err01.exe
sptimecounter02.exe
sptimerserver01.exe
sptimecounter03.exe
sptls01.exe
sptimespec01.exe
sptimecounter04.exe
sptls03.exe
tm01.exe
spversion01.exe
sptls04.exe
sptls02.exe
spwatchdog.exe
spwkspace.exe
tm02.exe
tm08.exe
tm09.exe
tm05.exe
tm06.exe
tm07.exe
tm04.exe
tm10.exe
tm03.exe
tm13.exe
tm14.exe
tm18.exe
tm12.exe
tm11.exe
tm16.exe
tm17.exe
tm15.exe
tm19.exe
tm25.exe
tm22.exe
tm24.exe
tm23.exe
tm21.exe
tm26.exe
tm20.exe
tm34.exe
tm31.exe
tm28.exe
tm30.exe
tm29.exe
tm32.exe
tm27.exe
tm33.exe
tmck.exe
tmtimer01.exe
tmonetoone.exe
tm35.exe
tm36.exe
tmfine01.exe
ts-unit-no-clock-0.exe
tmcontext01.exe
ts-fatal-too-large-tls-size.exe
ts-performance-no-clock-0.exe
ts-validation-1.exe
ts-validation-acfg-0.exe
ts-userext.exe
ts-fatal-init-task-construct-failed.exe
ts-terminate.exe
ts-validation-0.exe
ts-validation-acfg-1.exe
ts-validation-io-kernel.exe
ts-validation-one-cpu-0.exe
ts-validation-intr.exe
ts-validation-one-cpu-1.exe
ts-validation-cache.exe
ts-validation-no-clock-0.exe
ts-validation-non-smp.exe
ts-validation-timecounter-1.exe
ts-validation-timecounter-0.exe
ts-validation-tls-0.exe
ts-validation-tls-1.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=jmr3904 --log=run-jmr3904.log --use-gitconfig --mail .
Host: FreeBSD VM-FreeBSD12 12.2-RELEASE FreeBSD 12.2-RELEASE r366954 GENERIC amd64
Python: 3.8.12 (default, Sep 21 2021, 01:09:51) [Clang 10.0.1 (git at github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611a
Host: FreeBSD-12.2-RELEASE-amd64-64bit-ELF (FreeBSD VM-FreeBSD12 12.2-RELEASE FreeBSD 12.2-RELEASE r366954 GENERIC amd64 amd64)
[ 1/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: dhrystone.exe
Result: invalid
Time: 0:00:00.517789 dhrystone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x199c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880199c0
=> Loading section .init, size 0x48 lma ffffffff88019a30
=> Loading section .fini, size 0x30 lma ffffffff88019a78
=> Loading section .ctors, size 0x8 lma ffffffff88019aa8
=> Loading section .dtors, size 0x8 lma ffffffff88019ab0
=> Loading section .rdata, size 0x2718 lma ffffffff88019ac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c1d8
=> Loading section .data, size 0x5f0 lma ffffffff8801c1f0
=> Start address ffffffff88000004
=> Transfer rate: 933568 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 2/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: linpack.exe
Result: invalid
Time: 0:00:00.535417 linpack.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1af60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801af60
=> Loading section .init, size 0x48 lma ffffffff8801afd0
=> Loading section .fini, size 0x30 lma ffffffff8801b018
=> Loading section .ctors, size 0x8 lma ffffffff8801b048
=> Loading section .dtors, size 0x8 lma ffffffff8801b050
=> Loading section .rdata, size 0x2490 lma ffffffff8801b060
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d4f0
=> Loading section .data, size 0x5f0 lma ffffffff8801d508
=> Start address ffffffff88000004
=> Transfer rate: 972672 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 3/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: whetstone.exe
Result: invalid
Time: 0:00:00.526976 whetstone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a200 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801a200
=> Loading section .init, size 0x48 lma ffffffff8801a270
=> Loading section .fini, size 0x30 lma ffffffff8801a2b8
=> Loading section .ctors, size 0x8 lma ffffffff8801a2e8
=> Loading section .dtors, size 0x8 lma ffffffff8801a2f0
=> Loading section .rdata, size 0x2348 lma ffffffff8801a300
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c648
=> Loading section .data, size 0x600 lma ffffffff8801c660
=> Start address ffffffff88000004
=> Transfer rate: 942784 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 4/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid
Time: 0:00:00.525787 fsbdpart01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88022fa0
=> Loading section .init, size 0x48 lma ffffffff88023020
=> Loading section .fini, size 0x30 lma ffffffff88023068
=> Loading section .ctors, size 0x8 lma ffffffff88023098
=> Loading section .dtors, size 0x8 lma ffffffff880230a0
=> Loading section .rdata, size 0x28e0 lma ffffffff880230b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025990
=> Loading section .data, size 0x644 lma ffffffff880259a8
=> Start address ffffffff88000004
=> Transfer rate: 1244960 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 5/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsclose01.exe
Result: invalid
Time: 0:00:00.523486 fsclose01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1af70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801af70
=> Loading section .init, size 0x48 lma ffffffff8801afe0
=> Loading section .fini, size 0x30 lma ffffffff8801b028
=> Loading section .ctors, size 0x8 lma ffffffff8801b058
=> Loading section .dtors, size 0x8 lma ffffffff8801b060
=> Loading section .rdata, size 0x23c8 lma ffffffff8801b070
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d438
=> Loading section .data, size 0x5fc lma ffffffff8801d450
=> Start address ffffffff88000004
=> Transfer rate: 971296 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 6/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid
Time: 0:00:00.523564 fsdosfsformat01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2b230 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8802b230
=> Loading section .init, size 0x48 lma ffffffff8802b2a0
=> Loading section .fini, size 0x30 lma ffffffff8802b2e8
=> Loading section .ctors, size 0x8 lma ffffffff8802b318
=> Loading section .dtors, size 0x8 lma ffffffff8802b320
=> Loading section .rdata, size 0x2b50 lma ffffffff8802b330
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802de80
=> Loading section .data, size 0x620 lma ffffffff8802de98
=> Start address ffffffff88000004
=> Transfer rate: 1516928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 7/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid
Time: 0:00:00.521350 fsdosfsname01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x327e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880327e0
=> Loading section .init, size 0x48 lma ffffffff88032860
=> Loading section .fini, size 0x30 lma ffffffff880328a8
=> Loading section .ctors, size 0x8 lma ffffffff880328d8
=> Loading section .dtors, size 0x8 lma ffffffff880328e0
=> Loading section .rdata, size 0x121758 lma ffffffff880328f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88154048
=> Loading section .data, size 0x2c520 lma ffffffff88154060
=> Start address ffffffff88000004
=> Transfer rate: 12594112 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 8/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid
Time: 0:00:00.521175 fsdosfsname02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x25f10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88025f10
=> Loading section .init, size 0x48 lma ffffffff88025f80
=> Loading section .fini, size 0x30 lma ffffffff88025fc8
=> Loading section .ctors, size 0x8 lma ffffffff88025ff8
=> Loading section .dtors, size 0x8 lma ffffffff88026000
=> Loading section .rdata, size 0x2930 lma ffffffff88026010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028940
=> Loading section .data, size 0x638 lma ffffffff88028958
=> Start address ffffffff88000004
=> Transfer rate: 1342528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 9/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid
Time: 0:00:00.275414 fsdosfssync01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26eb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88026eb0
=> Loading section .init, size 0x48 lma ffffffff88026f30
=> Loading section .fini, size 0x30 lma ffffffff88026f78
=> Loading section .ctors, size 0x8 lma ffffffff88026fa8
=> Loading section .dtors, size 0x8 lma ffffffff88026fb0
=> Loading section .rdata, size 0x27e0 lma ffffffff88026fc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880297a0
=> Loading section .data, size 0x648 lma ffffffff880297b8
=> Start address ffffffff88000004
=> Transfer rate: 1372096 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 10/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid
Time: 0:00:00.260104 fsdosfswrite01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x281e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880281e0
=> Loading section .init, size 0x48 lma ffffffff88028250
=> Loading section .fini, size 0x30 lma ffffffff88028298
=> Loading section .ctors, size 0x8 lma ffffffff880282c8
=> Loading section .dtors, size 0x8 lma ffffffff880282d0
=> Loading section .rdata, size 0x28d8 lma ffffffff880282e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802abb8
=> Loading section .data, size 0x620 lma ffffffff8802abd0
=> Start address ffffffff88000004
=> Transfer rate: 1412928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 11/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid
Time: 0:00:00.256174 fsfseeko01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12cc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012cc0
=> Loading section .init, size 0x48 lma ffffffff88012d30
=> Loading section .fini, size 0x30 lma ffffffff88012d78
=> Loading section .ctors, size 0x8 lma ffffffff88012da8
=> Loading section .dtors, size 0x8 lma ffffffff88012db0
=> Loading section .rdata, size 0x1a84 lma ffffffff88012dc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014848
=> Loading section .data, size 0x458 lma ffffffff88014860
=> Start address ffffffff88000004
=> Transfer rate: 681312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 12/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid
Time: 0:00:00.262512 fsimfsconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ea0
=> Loading section .init, size 0x48 lma ffffffff88010f10
=> Loading section .fini, size 0x30 lma ffffffff88010f58
=> Loading section .ctors, size 0x8 lma ffffffff88010f88
=> Loading section .dtors, size 0x8 lma ffffffff88010f90
=> Loading section .rdata, size 0x1b28 lma ffffffff88010fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ac8
=> Loading section .data, size 0x408 lma ffffffff88012ae0
=> Start address ffffffff88000004
=> Transfer rate: 620288 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 13/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid
Time: 0:00:00.265898 fsimfsconfig02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010170
=> Loading section .init, size 0x48 lma ffffffff880101e0
=> Loading section .fini, size 0x30 lma ffffffff88010228
=> Loading section .ctors, size 0x8 lma ffffffff88010258
=> Loading section .dtors, size 0x8 lma ffffffff88010260
=> Loading section .rdata, size 0x1a79 lma ffffffff88010270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cf0
=> Loading section .data, size 0x448 lma ffffffff88011d08
=> Start address ffffffff88000004
=> Transfer rate: 592392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 14/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid
Time: 0:00:00.268698 fsimfsconfig03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f90
=> Loading section .init, size 0x48 lma ffffffff88011000
=> Loading section .fini, size 0x30 lma ffffffff88011048
=> Loading section .ctors, size 0x8 lma ffffffff88011078
=> Loading section .dtors, size 0x8 lma ffffffff88011080
=> Loading section .rdata, size 0x1a99 lma ffffffff88011090
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b30
=> Loading section .data, size 0x408 lma ffffffff88012b48
=> Start address ffffffff88000004
=> Transfer rate: 621064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 15/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid
Time: 0:00:00.257629 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013360
=> Loading section .init, size 0x48 lma ffffffff880133d0
=> Loading section .fini, size 0x30 lma ffffffff88013418
=> Loading section .ctors, size 0x8 lma ffffffff88013448
=> Loading section .dtors, size 0x8 lma ffffffff88013450
=> Loading section .rdata, size 0x1da4 lma ffffffff88013460
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015208
=> Loading section .data, size 0x490 lma ffffffff88015220
=> Start address ffffffff88000004
=> Transfer rate: 701728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 16/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:8 W:0 | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid
Time: 0:00:00.273329 fsjffs2gc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1f250 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801f250
=> Loading section .init, size 0x48 lma ffffffff8801f2d0
=> Loading section .fini, size 0x30 lma ffffffff8801f318
=> Loading section .ctors, size 0x8 lma ffffffff8801f348
=> Loading section .dtors, size 0x8 lma ffffffff8801f350
=> Loading section .rdata, size 0x528d lma ffffffff8801f360
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880245f0
=> Loading section .data, size 0x21500 lma ffffffff88024608
=> Start address ffffffff88000004
=> Transfer rate: 2283496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 17/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: fsnofs01.exe
Result: invalid
Time: 0:00:00.270103 fsnofs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf0a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f0a0
=> Loading section .init, size 0x48 lma ffffffff8800f110
=> Loading section .fini, size 0x30 lma ffffffff8800f158
=> Loading section .ctors, size 0x8 lma ffffffff8800f188
=> Loading section .dtors, size 0x8 lma ffffffff8800f190
=> Loading section .rdata, size 0x1f34 lma ffffffff8800f1a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880110d8
=> Loading section .data, size 0x438 lma ffffffff880110f0
=> Start address ffffffff88000004
=> Transfer rate: 567520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 18/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid
Time: 0:00:00.272233 fsrfsbitmap01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x228d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880228d0
=> Loading section .init, size 0x48 lma ffffffff88022950
=> Loading section .fini, size 0x30 lma ffffffff88022998
=> Loading section .ctors, size 0x8 lma ffffffff880229c8
=> Loading section .dtors, size 0x8 lma ffffffff880229d0
=> Loading section .rdata, size 0x5744 lma ffffffff880229e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028128
=> Loading section .data, size 0x4d0 lma ffffffff88028140
=> Start address ffffffff88000004
=> Transfer rate: 1323040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 19/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: fsrofs01.exe
Result: invalid
Time: 0:00:00.267074 fsrofs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x216f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880216f0
=> Loading section .init, size 0x48 lma ffffffff88021770
=> Loading section .fini, size 0x30 lma ffffffff880217b8
=> Loading section .ctors, size 0x8 lma ffffffff880217e8
=> Loading section .dtors, size 0x8 lma ffffffff880217f0
=> Loading section .rdata, size 0x4c48 lma ffffffff88021800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026448
=> Loading section .data, size 0x4a8 lma ffffffff88026460
=> Start address ffffffff88000004
=> Transfer rate: 1263616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 20/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid
Time: 0:00:00.275418 imfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18d60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018d60
=> Loading section .init, size 0x48 lma ffffffff88018de0
=> Loading section .fini, size 0x30 lma ffffffff88018e28
=> Loading section .ctors, size 0x8 lma ffffffff88018e58
=> Loading section .dtors, size 0x8 lma ffffffff88018e60
=> Loading section .rdata, size 0x2570 lma ffffffff88018e70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b3e0
=> Loading section .data, size 0x5fc lma ffffffff8801b3f8
=> Start address ffffffff88000004
=> Transfer rate: 905056 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 21/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid
Time: 0:00:00.270762 imfs_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011510
=> Loading section .init, size 0x48 lma ffffffff88011590
=> Loading section .fini, size 0x30 lma ffffffff880115d8
=> Loading section .ctors, size 0x8 lma ffffffff88011608
=> Loading section .dtors, size 0x8 lma ffffffff88011610
=> Loading section .rdata, size 0x1bb1 lma ffffffff88011620
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131d8
=> Loading section .data, size 0x490 lma ffffffff880131f0
=> Start address ffffffff88000004
=> Transfer rate: 635784 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 22/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid
Time: 0:00:00.262105 imfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12220 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012220
=> Loading section .init, size 0x48 lma ffffffff880122a0
=> Loading section .fini, size 0x30 lma ffffffff880122e8
=> Loading section .ctors, size 0x8 lma ffffffff88012318
=> Loading section .dtors, size 0x8 lma ffffffff88012320
=> Loading section .rdata, size 0x1d35 lma ffffffff88012330
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014068
=> Loading section .data, size 0x490 lma ffffffff88014080
=> Start address ffffffff88000004
=> Transfer rate: 665640 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 23/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid
Time: 0:00:00.270719 imfs_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18fe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018fe0
=> Loading section .init, size 0x48 lma ffffffff88019060
=> Loading section .fini, size 0x30 lma ffffffff880190a8
=> Loading section .ctors, size 0x8 lma ffffffff880190d8
=> Loading section .dtors, size 0x8 lma ffffffff880190e0
=> Loading section .rdata, size 0x2410 lma ffffffff880190f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b500
=> Loading section .data, size 0x5fc lma ffffffff8801b518
=> Start address ffffffff88000004
=> Transfer rate: 907360 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 24/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:16 W:0 | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.268130 imfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013ee0
=> Loading section .init, size 0x48 lma ffffffff88013f60
=> Loading section .fini, size 0x30 lma ffffffff88013fa8
=> Loading section .ctors, size 0x8 lma ffffffff88013fd8
=> Loading section .dtors, size 0x8 lma ffffffff88013fe0
=> Loading section .rdata, size 0x2035 lma ffffffff88013ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016028
=> Loading section .data, size 0x490 lma ffffffff88016040
=> Start address ffffffff88000004
=> Transfer rate: 730664 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 25/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.272277 imfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012060
=> Loading section .init, size 0x48 lma ffffffff880120e0
=> Loading section .fini, size 0x30 lma ffffffff88012128
=> Loading section .ctors, size 0x8 lma ffffffff88012158
=> Loading section .dtors, size 0x8 lma ffffffff88012160
=> Loading section .rdata, size 0x1bc5 lma ffffffff88012170
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d38
=> Loading section .data, size 0x490 lma ffffffff88013d50
=> Start address ffffffff88000004
=> Transfer rate: 659112 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 26/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid
Time: 0:00:00.272925 imfs_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11a90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011a90
=> Loading section .init, size 0x48 lma ffffffff88011b10
=> Loading section .fini, size 0x30 lma ffffffff88011b58
=> Loading section .ctors, size 0x8 lma ffffffff88011b88
=> Loading section .dtors, size 0x8 lma ffffffff88011b90
=> Loading section .rdata, size 0x1d0d lma ffffffff88011ba0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138b0
=> Loading section .data, size 0x490 lma ffffffff880138c8
=> Start address ffffffff88000004
=> Transfer rate: 649832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 27/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid
Time: 0:00:00.268015 imfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012b30
=> Loading section .init, size 0x48 lma ffffffff88012bb0
=> Loading section .fini, size 0x30 lma ffffffff88012bf8
=> Loading section .ctors, size 0x8 lma ffffffff88012c28
=> Loading section .dtors, size 0x8 lma ffffffff88012c30
=> Loading section .rdata, size 0x1ce8 lma ffffffff88012c40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014928
=> Loading section .data, size 0x49c lma ffffffff88014940
=> Start address ffffffff88000004
=> Transfer rate: 683680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 28/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid
Time: 0:00:00.275171 jffs2_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26a00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88026a00
=> Loading section .init, size 0x48 lma ffffffff88026a80
=> Loading section .fini, size 0x30 lma ffffffff88026ac8
=> Loading section .ctors, size 0x8 lma ffffffff88026af8
=> Loading section .dtors, size 0x8 lma ffffffff88026b00
=> Loading section .rdata, size 0x5970 lma ffffffff88026b10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c480
=> Loading section .data, size 0x21664 lma ffffffff8802c498
=> Start address ffffffff88000004
=> Transfer rate: 2545568 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 29/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid
Time: 0:00:00.276487 jffs2_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1f210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801f210
=> Loading section .init, size 0x48 lma ffffffff8801f290
=> Loading section .fini, size 0x30 lma ffffffff8801f2d8
=> Loading section .ctors, size 0x8 lma ffffffff8801f308
=> Loading section .dtors, size 0x8 lma ffffffff8801f310
=> Loading section .rdata, size 0x4fed lma ffffffff8801f320
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024310
=> Loading section .data, size 0x214f8 lma ffffffff88024328
=> Start address ffffffff88000004
=> Transfer rate: 2277544 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 30/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid
Time: 0:00:00.267336 jffs2_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ff30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801ff30
=> Loading section .init, size 0x48 lma ffffffff8801ffb0
=> Loading section .fini, size 0x30 lma ffffffff8801fff8
=> Loading section .ctors, size 0x8 lma ffffffff88020028
=> Loading section .dtors, size 0x8 lma ffffffff88020030
=> Loading section .rdata, size 0x5171 lma ffffffff88020040
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880251b8
=> Loading section .data, size 0x214f8 lma ffffffff880251d0
=> Start address ffffffff88000004
=> Transfer rate: 2307528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 31/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid
Time: 0:00:00.267991 jffs2_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26c80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88026c80
=> Loading section .init, size 0x48 lma ffffffff88026d00
=> Loading section .fini, size 0x30 lma ffffffff88026d48
=> Loading section .ctors, size 0x8 lma ffffffff88026d78
=> Loading section .dtors, size 0x8 lma ffffffff88026d80
=> Loading section .rdata, size 0x5808 lma ffffffff88026d90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c598
=> Loading section .data, size 0x21664 lma ffffffff8802c5b0
=> Start address ffffffff88000004
=> Transfer rate: 2547808 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 32/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:24 W:0 | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid
Time: 0:00:00.263410 jffs2_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21b10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88021b10
=> Loading section .init, size 0x48 lma ffffffff88021b90
=> Loading section .fini, size 0x30 lma ffffffff88021bd8
=> Loading section .ctors, size 0x8 lma ffffffff88021c08
=> Loading section .dtors, size 0x8 lma ffffffff88021c10
=> Loading section .rdata, size 0x5479 lma ffffffff88021c20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880270a0
=> Loading section .data, size 0x21500 lma ffffffff880270b8
=> Start address ffffffff88000004
=> Transfer rate: 2370888 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 33/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid
Time: 0:00:00.276542 jffs2_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1fd70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801fd70
=> Loading section .init, size 0x48 lma ffffffff8801fdf0
=> Loading section .fini, size 0x30 lma ffffffff8801fe38
=> Loading section .ctors, size 0x8 lma ffffffff8801fe68
=> Loading section .dtors, size 0x8 lma ffffffff8801fe70
=> Loading section .rdata, size 0x5001 lma ffffffff8801fe80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024e88
=> Loading section .data, size 0x214f8 lma ffffffff88024ea0
=> Start address ffffffff88000004
=> Transfer rate: 2301000 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 34/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid
Time: 0:00:00.272837 jffs2_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1f6c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801f6c0
=> Loading section .init, size 0x48 lma ffffffff8801f740
=> Loading section .fini, size 0x30 lma ffffffff8801f788
=> Loading section .ctors, size 0x8 lma ffffffff8801f7b8
=> Loading section .dtors, size 0x8 lma ffffffff8801f7c0
=> Loading section .rdata, size 0x5149 lma ffffffff8801f7d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024920
=> Loading section .data, size 0x214f8 lma ffffffff88024938
=> Start address ffffffff88000004
=> Transfer rate: 2289928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 35/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid
Time: 0:00:00.266239 jffs2_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88020830
=> Loading section .init, size 0x48 lma ffffffff880208b0
=> Loading section .fini, size 0x30 lma ffffffff880208f8
=> Loading section .ctors, size 0x8 lma ffffffff88020928
=> Loading section .dtors, size 0x8 lma ffffffff88020930
=> Loading section .rdata, size 0x5124 lma ffffffff88020940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025a68
=> Loading section .data, size 0x21504 lma ffffffff88025a80
=> Start address ffffffff88000004
=> Transfer rate: 2325440 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 36/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid
Time: 0:00:00.274686 mdosfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2c060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8802c060
=> Loading section .init, size 0x48 lma ffffffff8802c0e0
=> Loading section .fini, size 0x30 lma ffffffff8802c128
=> Loading section .ctors, size 0x8 lma ffffffff8802c158
=> Loading section .dtors, size 0x8 lma ffffffff8802c160
=> Loading section .rdata, size 0x2fe0 lma ffffffff8802c170
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802f150
=> Loading section .data, size 0x688 lma ffffffff8802f168
=> Start address ffffffff88000004
=> Transfer rate: 1556288 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 37/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid
Time: 0:00:00.277735 mdosfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x283a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880283a0
=> Loading section .init, size 0x48 lma ffffffff88028420
=> Loading section .fini, size 0x30 lma ffffffff88028468
=> Loading section .ctors, size 0x8 lma ffffffff88028498
=> Loading section .dtors, size 0x8 lma ffffffff880284a0
=> Loading section .rdata, size 0x2bb0 lma ffffffff880284b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b060
=> Loading section .data, size 0x688 lma ffffffff8802b078
=> Start address ffffffff88000004
=> Transfer rate: 1423296 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 38/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.270367 mdosfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2a150 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8802a150
=> Loading section .init, size 0x48 lma ffffffff8802a1d0
=> Loading section .fini, size 0x30 lma ffffffff8802a218
=> Loading section .ctors, size 0x8 lma ffffffff8802a248
=> Loading section .dtors, size 0x8 lma ffffffff8802a250
=> Loading section .rdata, size 0x2eb0 lma ffffffff8802a260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802d110
=> Loading section .data, size 0x688 lma ffffffff8802d128
=> Start address ffffffff88000004
=> Transfer rate: 1490240 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 39/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.275661 mdosfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x286a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880286a0
=> Loading section .init, size 0x48 lma ffffffff88028720
=> Loading section .fini, size 0x30 lma ffffffff88028768
=> Loading section .ctors, size 0x8 lma ffffffff88028798
=> Loading section .dtors, size 0x8 lma ffffffff880287a0
=> Loading section .rdata, size 0x2a40 lma ffffffff880287b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b1f0
=> Loading section .data, size 0x688 lma ffffffff8802b208
=> Start address ffffffff88000004
=> Transfer rate: 1426496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 40/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:32 W:0 | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid
Time: 0:00:00.272109 mdosfs_fsstatvfs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x277b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880277b0
=> Loading section .init, size 0x48 lma ffffffff88027830
=> Loading section .fini, size 0x30 lma ffffffff88027878
=> Loading section .ctors, size 0x8 lma ffffffff880278a8
=> Loading section .dtors, size 0x8 lma ffffffff880278b0
=> Loading section .rdata, size 0x2b90 lma ffffffff880278c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a450
=> Loading section .data, size 0x688 lma ffffffff8802a468
=> Start address ffffffff88000004
=> Transfer rate: 1398592 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 41/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid
Time: 0:00:00.270320 mdosfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28e70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88028e70
=> Loading section .init, size 0x48 lma ffffffff88028ef0
=> Loading section .fini, size 0x30 lma ffffffff88028f38
=> Loading section .ctors, size 0x8 lma ffffffff88028f68
=> Loading section .dtors, size 0x8 lma ffffffff88028f70
=> Loading section .rdata, size 0x2b4c lma ffffffff88028f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802bad0
=> Loading section .data, size 0x694 lma ffffffff8802bae8
=> Start address ffffffff88000004
=> Transfer rate: 1444736 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 42/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid
Time: 0:00:00.273534 mimfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x199b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880199b0
=> Loading section .init, size 0x48 lma ffffffff88019a30
=> Loading section .fini, size 0x30 lma ffffffff88019a78
=> Loading section .ctors, size 0x8 lma ffffffff88019aa8
=> Loading section .dtors, size 0x8 lma ffffffff88019ab0
=> Loading section .rdata, size 0x2698 lma ffffffff88019ac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c158
=> Loading section .data, size 0x62c lma ffffffff8801c170
=> Start address ffffffff88000004
=> Transfer rate: 933024 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 43/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid
Time: 0:00:00.275326 mimfs_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012160
=> Loading section .init, size 0x48 lma ffffffff880121e0
=> Loading section .fini, size 0x30 lma ffffffff88012228
=> Loading section .ctors, size 0x8 lma ffffffff88012258
=> Loading section .dtors, size 0x8 lma ffffffff88012260
=> Loading section .rdata, size 0x1cd5 lma ffffffff88012270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f48
=> Loading section .data, size 0x4c0 lma ffffffff88013f60
=> Start address ffffffff88000004
=> Transfer rate: 663720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 44/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid
Time: 0:00:00.260164 mimfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012e70
=> Loading section .init, size 0x48 lma ffffffff88012ef0
=> Loading section .fini, size 0x30 lma ffffffff88012f38
=> Loading section .ctors, size 0x8 lma ffffffff88012f68
=> Loading section .dtors, size 0x8 lma ffffffff88012f70
=> Loading section .rdata, size 0x1e59 lma ffffffff88012f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014de0
=> Loading section .data, size 0x4c0 lma ffffffff88014df8
=> Start address ffffffff88000004
=> Transfer rate: 693576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 45/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid
Time: 0:00:00.265747 mimfs_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88019c30
=> Loading section .init, size 0x48 lma ffffffff88019cb0
=> Loading section .fini, size 0x30 lma ffffffff88019cf8
=> Loading section .ctors, size 0x8 lma ffffffff88019d28
=> Loading section .dtors, size 0x8 lma ffffffff88019d30
=> Loading section .rdata, size 0x2530 lma ffffffff88019d40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c270
=> Loading section .data, size 0x62c lma ffffffff8801c288
=> Start address ffffffff88000004
=> Transfer rate: 935264 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 46/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.268080 mimfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014b30
=> Loading section .init, size 0x48 lma ffffffff88014bb0
=> Loading section .fini, size 0x30 lma ffffffff88014bf8
=> Loading section .ctors, size 0x8 lma ffffffff88014c28
=> Loading section .dtors, size 0x8 lma ffffffff88014c30
=> Loading section .rdata, size 0x2159 lma ffffffff88014c40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016da0
=> Loading section .data, size 0x4c0 lma ffffffff88016db8
=> Start address ffffffff88000004
=> Transfer rate: 758600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 47/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid
Time: 0:00:00.264070 mimfs_fsrename.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c980 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801c980
=> Loading section .init, size 0x48 lma ffffffff8801ca00
=> Loading section .fini, size 0x30 lma ffffffff8801ca48
=> Loading section .ctors, size 0x8 lma ffffffff8801ca78
=> Loading section .dtors, size 0x8 lma ffffffff8801ca80
=> Loading section .rdata, size 0x2bc0 lma ffffffff8801ca90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f650
=> Loading section .data, size 0x62c lma ffffffff8801f668
=> Start address ffffffff88000004
=> Transfer rate: 1041504 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 48/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:40 W:0 | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.273181 mimfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12cb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012cb0
=> Loading section .init, size 0x48 lma ffffffff88012d30
=> Loading section .fini, size 0x30 lma ffffffff88012d78
=> Loading section .ctors, size 0x8 lma ffffffff88012da8
=> Loading section .dtors, size 0x8 lma ffffffff88012db0
=> Loading section .rdata, size 0x1ce9 lma ffffffff88012dc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ab0
=> Loading section .data, size 0x4c0 lma ffffffff88014ac8
=> Start address ffffffff88000004
=> Transfer rate: 687048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 49/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid
Time: 0:00:00.268308 mimfs_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x126e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880126e0
=> Loading section .init, size 0x48 lma ffffffff88012760
=> Loading section .fini, size 0x30 lma ffffffff880127a8
=> Loading section .ctors, size 0x8 lma ffffffff880127d8
=> Loading section .dtors, size 0x8 lma ffffffff880127e0
=> Loading section .rdata, size 0x1e31 lma ffffffff880127f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014628
=> Loading section .data, size 0x4c0 lma ffffffff88014640
=> Start address ffffffff88000004
=> Transfer rate: 677768 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 50/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid
Time: 0:00:00.272861 mimfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13780 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013780
=> Loading section .init, size 0x48 lma ffffffff88013800
=> Loading section .fini, size 0x30 lma ffffffff88013848
=> Loading section .ctors, size 0x8 lma ffffffff88013878
=> Loading section .dtors, size 0x8 lma ffffffff88013880
=> Loading section .rdata, size 0x1e0c lma ffffffff88013890
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880156a0
=> Loading section .data, size 0x4cc lma ffffffff880156b8
=> Start address ffffffff88000004
=> Transfer rate: 711616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 51/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid
Time: 0:00:00.276127 mrfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28c80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88028c80
=> Loading section .init, size 0x48 lma ffffffff88028d00
=> Loading section .fini, size 0x30 lma ffffffff88028d48
=> Loading section .ctors, size 0x8 lma ffffffff88028d78
=> Loading section .dtors, size 0x8 lma ffffffff88028d80
=> Loading section .rdata, size 0x5738 lma ffffffff88028d90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e4c8
=> Loading section .data, size 0x63c lma ffffffff8802e4e0
=> Start address ffffffff88000004
=> Transfer rate: 1530016 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 52/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid
Time: 0:00:00.270796 mrfs_fsfpathconf.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88021060
=> Loading section .init, size 0x48 lma ffffffff880210e0
=> Loading section .fini, size 0x30 lma ffffffff88021128
=> Loading section .ctors, size 0x8 lma ffffffff88021158
=> Loading section .dtors, size 0x8 lma ffffffff88021160
=> Loading section .rdata, size 0x4f6c lma ffffffff88021170
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880260e0
=> Loading section .data, size 0x4d0 lma ffffffff880260f8
=> Start address ffffffff88000004
=> Transfer rate: 1256928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 53/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid
Time: 0:00:00.282997 mrfs_fslink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21560 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88021560
=> Loading section .init, size 0x48 lma ffffffff880215e0
=> Loading section .fini, size 0x30 lma ffffffff88021628
=> Loading section .ctors, size 0x8 lma ffffffff88021658
=> Loading section .dtors, size 0x8 lma ffffffff88021660
=> Loading section .rdata, size 0x4d8c lma ffffffff88021670
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026400
=> Loading section .data, size 0x4d0 lma ffffffff88026418
=> Start address ffffffff88000004
=> Transfer rate: 1263328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 54/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid
Time: 0:00:00.266756 mrfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88021fa0
=> Loading section .init, size 0x48 lma ffffffff88022020
=> Loading section .fini, size 0x30 lma ffffffff88022068
=> Loading section .ctors, size 0x8 lma ffffffff88022098
=> Loading section .dtors, size 0x8 lma ffffffff880220a0
=> Loading section .rdata, size 0x4f14 lma ffffffff880220b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026fc8
=> Loading section .data, size 0x4d0 lma ffffffff88026fe0
=> Start address ffffffff88000004
=> Transfer rate: 1287456 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 55/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid
Time: 0:00:00.271509 mrfs_fspermission.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28f00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88028f00
=> Loading section .init, size 0x48 lma ffffffff88028f80
=> Loading section .fini, size 0x30 lma ffffffff88028fc8
=> Loading section .ctors, size 0x8 lma ffffffff88028ff8
=> Loading section .dtors, size 0x8 lma ffffffff88029000
=> Loading section .rdata, size 0x55e8 lma ffffffff88029010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e5f8
=> Loading section .data, size 0x63c lma ffffffff8802e610
=> Start address ffffffff88000004
=> Transfer rate: 1532448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 56/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:48 W:0 | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid
Time: 0:00:00.254791 mrfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x23ec0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88023ec0
=> Loading section .init, size 0x48 lma ffffffff88023f40
=> Loading section .fini, size 0x30 lma ffffffff88023f88
=> Loading section .ctors, size 0x8 lma ffffffff88023fb8
=> Loading section .dtors, size 0x8 lma ffffffff88023fc0
=> Loading section .rdata, size 0x5210 lma ffffffff88023fd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880291e0
=> Loading section .data, size 0x4d0 lma ffffffff880291f8
=> Start address ffffffff88000004
=> Transfer rate: 1357312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 57/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid
Time: 0:00:00.274043 mrfs_fsrename.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2bc40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8802bc40
=> Loading section .init, size 0x48 lma ffffffff8802bcc0
=> Loading section .fini, size 0x30 lma ffffffff8802bd08
=> Loading section .ctors, size 0x8 lma ffffffff8802bd38
=> Loading section .dtors, size 0x8 lma ffffffff8802bd40
=> Loading section .rdata, size 0x5c70 lma ffffffff8802bd50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880319c0
=> Loading section .data, size 0x63c lma ffffffff880319d8
=> Start address ffffffff88000004
=> Transfer rate: 1638496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 58/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid
Time: 0:00:00.269850 mrfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x222b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880222b0
=> Loading section .init, size 0x48 lma ffffffff88022330
=> Loading section .fini, size 0x30 lma ffffffff88022378
=> Loading section .ctors, size 0x8 lma ffffffff880223a8
=> Loading section .dtors, size 0x8 lma ffffffff880223b0
=> Loading section .rdata, size 0x4da8 lma ffffffff880223c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027168
=> Loading section .data, size 0x4d0 lma ffffffff88027180
=> Start address ffffffff88000004
=> Transfer rate: 1290816 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 59/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid
Time: 0:00:00.274387 mrfs_fssymlink.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x21a10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88021a10
=> Loading section .init, size 0x48 lma ffffffff88021a90
=> Loading section .fini, size 0x30 lma ffffffff88021ad8
=> Loading section .ctors, size 0x8 lma ffffffff88021b08
=> Loading section .dtors, size 0x8 lma ffffffff88021b10
=> Loading section .rdata, size 0x4eec lma ffffffff88021b20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026a10
=> Loading section .data, size 0x4d0 lma ffffffff88026a28
=> Start address ffffffff88000004
=> Transfer rate: 1275744 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 60/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid
Time: 0:00:00.270837 mrfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22aa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88022aa0
=> Loading section .init, size 0x48 lma ffffffff88022b20
=> Loading section .fini, size 0x30 lma ffffffff88022b68
=> Loading section .ctors, size 0x8 lma ffffffff88022b98
=> Loading section .dtors, size 0x8 lma ffffffff88022ba0
=> Loading section .rdata, size 0x4eac lma ffffffff88022bb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027a60
=> Loading section .data, size 0x4dc lma ffffffff88027a78
=> Start address ffffffff88000004
=> Transfer rate: 1309248 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 61/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: block01.exe
Result: invalid
Time: 0:00:00.276253 block01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x161d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880161d0
=> Loading section .init, size 0x48 lma ffffffff88016240
=> Loading section .fini, size 0x30 lma ffffffff88016288
=> Loading section .ctors, size 0x8 lma ffffffff880162b8
=> Loading section .dtors, size 0x8 lma ffffffff880162c0
=> Loading section .rdata, size 0x1cec lma ffffffff880162d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017fc0
=> Loading section .data, size 0x480 lma ffffffff88017fd8
=> Start address ffffffff88000004
=> Transfer rate: 795232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 62/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: block02.exe
Result: invalid
Time: 0:00:00.262189 block02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14ca0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014ca0
=> Loading section .init, size 0x48 lma ffffffff88014d10
=> Loading section .fini, size 0x30 lma ffffffff88014d58
=> Loading section .ctors, size 0x8 lma ffffffff88014d88
=> Loading section .dtors, size 0x8 lma ffffffff88014d90
=> Loading section .rdata, size 0x1ca4 lma ffffffff88014da0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016a48
=> Loading section .data, size 0x470 lma ffffffff88016a60
=> Start address ffffffff88000004
=> Transfer rate: 751136 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 63/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: block03.exe
Result: invalid
Time: 0:00:00.273105 block03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14c40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014c40
=> Loading section .init, size 0x48 lma ffffffff88014cb0
=> Loading section .fini, size 0x30 lma ffffffff88014cf8
=> Loading section .ctors, size 0x8 lma ffffffff88014d28
=> Loading section .dtors, size 0x8 lma ffffffff88014d30
=> Loading section .rdata, size 0x1c8c lma ffffffff88014d40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169d0
=> Loading section .data, size 0x470 lma ffffffff880169e8
=> Start address ffffffff88000004
=> Transfer rate: 750176 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 64/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:56 W:0 | mipstx39/jmr3904: block04.exe
Result: invalid
Time: 0:00:00.271612 block04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14bd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014bd0
=> Loading section .init, size 0x48 lma ffffffff88014c40
=> Loading section .fini, size 0x30 lma ffffffff88014c88
=> Loading section .ctors, size 0x8 lma ffffffff88014cb8
=> Loading section .dtors, size 0x8 lma ffffffff88014cc0
=> Loading section .rdata, size 0x1c24 lma ffffffff88014cd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880168f8
=> Loading section .data, size 0x470 lma ffffffff88016910
=> Start address ffffffff88000004
=> Transfer rate: 748448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 65/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block05.exe
Result: invalid
Time: 0:00:00.260837 block05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15e90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015e90
=> Loading section .init, size 0x48 lma ffffffff88015f00
=> Loading section .fini, size 0x30 lma ffffffff88015f48
=> Loading section .ctors, size 0x8 lma ffffffff88015f78
=> Loading section .dtors, size 0x8 lma ffffffff88015f80
=> Loading section .rdata, size 0x1c6c lma ffffffff88015f90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017c00
=> Loading section .data, size 0x480 lma ffffffff88017c18
=> Start address ffffffff88000004
=> Transfer rate: 787552 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 66/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block06.exe
Result: invalid
Time: 0:00:00.274665 block06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ebe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801ebe0
=> Loading section .init, size 0x48 lma ffffffff8801ec60
=> Loading section .fini, size 0x30 lma ffffffff8801eca8
=> Loading section .ctors, size 0x8 lma ffffffff8801ecd8
=> Loading section .dtors, size 0x8 lma ffffffff8801ece0
=> Loading section .rdata, size 0x2de0 lma ffffffff8801ecf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021ad0
=> Loading section .data, size 0x61c lma ffffffff88021ae8
=> Start address ffffffff88000004
=> Transfer rate: 1116128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 67/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block07.exe
Result: invalid
Time: 0:00:00.269344 block07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14fd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014fd0
=> Loading section .init, size 0x48 lma ffffffff88015040
=> Loading section .fini, size 0x30 lma ffffffff88015088
=> Loading section .ctors, size 0x8 lma ffffffff880150b8
=> Loading section .dtors, size 0x8 lma ffffffff880150c0
=> Loading section .rdata, size 0x1d00 lma ffffffff880150d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016dd0
=> Loading section .data, size 0x470 lma ffffffff88016de8
=> Start address ffffffff88000004
=> Transfer rate: 758400 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 68/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block08.exe
Result: invalid
Time: 0:00:00.276375 block08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c5a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801c5a0
=> Loading section .init, size 0x48 lma ffffffff8801c620
=> Loading section .fini, size 0x30 lma ffffffff8801c668
=> Loading section .ctors, size 0x8 lma ffffffff8801c698
=> Loading section .dtors, size 0x8 lma ffffffff8801c6a0
=> Loading section .rdata, size 0x2554 lma ffffffff8801c6b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ec08
=> Loading section .data, size 0x518 lma ffffffff8801ec20
=> Start address ffffffff88000004
=> Transfer rate: 1018208 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 69/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block09.exe
Result: invalid
Time: 0:00:00.267989 block09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15620 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015620
=> Loading section .init, size 0x48 lma ffffffff88015690
=> Loading section .fini, size 0x30 lma ffffffff880156d8
=> Loading section .ctors, size 0x8 lma ffffffff88015708
=> Loading section .dtors, size 0x8 lma ffffffff88015710
=> Loading section .rdata, size 0x1c2c lma ffffffff88015720
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017350
=> Loading section .data, size 0x480 lma ffffffff88017368
=> Start address ffffffff88000004
=> Transfer rate: 769760 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 70/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block10.exe
Result: invalid
Time: 0:00:00.271908 block10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15f80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015f80
=> Loading section .init, size 0x48 lma ffffffff88015ff0
=> Loading section .fini, size 0x30 lma ffffffff88016038
=> Loading section .ctors, size 0x8 lma ffffffff88016068
=> Loading section .dtors, size 0x8 lma ffffffff88016070
=> Loading section .rdata, size 0x1e54 lma ffffffff88016080
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017ed8
=> Loading section .data, size 0x480 lma ffffffff88017ef0
=> Start address ffffffff88000004
=> Transfer rate: 793376 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 71/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block11.exe
Result: invalid
Time: 0:00:00.262495 block11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16a70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016a70
=> Loading section .init, size 0x48 lma ffffffff88016af0
=> Loading section .fini, size 0x30 lma ffffffff88016b38
=> Loading section .ctors, size 0x8 lma ffffffff88016b68
=> Loading section .dtors, size 0x8 lma ffffffff88016b70
=> Loading section .rdata, size 0x1e34 lma ffffffff88016b80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880189b8
=> Loading section .data, size 0x498 lma ffffffff880189d0
=> Start address ffffffff88000004
=> Transfer rate: 815840 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 72/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:64 W:0 | mipstx39/jmr3904: block12.exe
Result: invalid
Time: 0:00:00.271373 block12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15080 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015080
=> Loading section .init, size 0x48 lma ffffffff880150f0
=> Loading section .fini, size 0x30 lma ffffffff88015138
=> Loading section .ctors, size 0x8 lma ffffffff88015168
=> Loading section .dtors, size 0x8 lma ffffffff88015170
=> Loading section .rdata, size 0x1c55 lma ffffffff88015180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016dd8
=> Loading section .data, size 0x4b8 lma ffffffff88016df0
=> Start address ffffffff88000004
=> Transfer rate: 759016 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 73/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: block13.exe
Result: invalid
Time: 0:00:00.274700 block13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015190
=> Loading section .init, size 0x48 lma ffffffff88015200
=> Loading section .fini, size 0x30 lma ffffffff88015248
=> Loading section .ctors, size 0x8 lma ffffffff88015278
=> Loading section .dtors, size 0x8 lma ffffffff88015280
=> Loading section .rdata, size 0x2199 lma ffffffff88015290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017430
=> Loading section .data, size 0x480 lma ffffffff88017448
=> Start address ffffffff88000004
=> Transfer rate: 771528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 74/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: block14.exe
Result: invalid
Time: 0:00:00.261881 block14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15430 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015430
=> Loading section .init, size 0x48 lma ffffffff880154a0
=> Loading section .fini, size 0x30 lma ffffffff880154e8
=> Loading section .ctors, size 0x8 lma ffffffff88015518
=> Loading section .dtors, size 0x8 lma ffffffff88015520
=> Loading section .rdata, size 0x25e9 lma ffffffff88015530
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b20
=> Loading section .data, size 0x480 lma ffffffff88017b38
=> Start address ffffffff88000004
=> Transfer rate: 785736 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 75/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: block15.exe
Result: invalid
Time: 0:00:00.260427 block15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x151f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880151f0
=> Loading section .init, size 0x48 lma ffffffff88015260
=> Loading section .fini, size 0x30 lma ffffffff880152a8
=> Loading section .ctors, size 0x8 lma ffffffff880152d8
=> Loading section .dtors, size 0x8 lma ffffffff880152e0
=> Loading section .rdata, size 0x1d21 lma ffffffff880152f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017018
=> Loading section .data, size 0x480 lma ffffffff88017030
=> Start address ffffffff88000004
=> Transfer rate: 763144 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 76/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: block16.exe
Result: invalid
Time: 0:00:00.269075 block16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15480 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015480
=> Loading section .init, size 0x48 lma ffffffff880154f0
=> Loading section .fini, size 0x30 lma ffffffff88015538
=> Loading section .ctors, size 0x8 lma ffffffff88015568
=> Loading section .dtors, size 0x8 lma ffffffff88015570
=> Loading section .rdata, size 0x1cd1 lma ffffffff88015580
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017258
=> Loading section .data, size 0x480 lma ffffffff88017270
=> Start address ffffffff88000004
=> Transfer rate: 767752 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 77/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: block17.exe
Result: invalid
Time: 0:00:00.276660 block17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x148e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880148e0
=> Loading section .init, size 0x48 lma ffffffff88014950
=> Loading section .fini, size 0x30 lma ffffffff88014998
=> Loading section .ctors, size 0x8 lma ffffffff880149c8
=> Loading section .dtors, size 0x8 lma ffffffff880149d0
=> Loading section .rdata, size 0x1b79 lma ffffffff880149e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016560
=> Loading section .data, size 0x480 lma ffffffff88016578
=> Start address ffffffff88000004
=> Transfer rate: 741192 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 78/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid
Time: 0:00:00.269566 bspcmdline01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10980 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010980
=> Loading section .init, size 0x48 lma ffffffff880109f0
=> Loading section .fini, size 0x30 lma ffffffff88010a38
=> Loading section .ctors, size 0x8 lma ffffffff88010a68
=> Loading section .dtors, size 0x8 lma ffffffff88010a70
=> Loading section .rdata, size 0x1f69 lma ffffffff88010a80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129f0
=> Loading section .data, size 0x448 lma ffffffff88012a08
=> Start address ffffffff88000004
=> Transfer rate: 619016 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 79/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: capture01.exe
Result: invalid
Time: 0:00:00.272304 capture01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e640 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801e640
=> Loading section .init, size 0x48 lma ffffffff8801e6c0
=> Loading section .fini, size 0x30 lma ffffffff8801e708
=> Loading section .ctors, size 0x8 lma ffffffff8801e738
=> Loading section .dtors, size 0x8 lma ffffffff8801e740
=> Loading section .rdata, size 0x2828 lma ffffffff8801e750
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020f78
=> Loading section .data, size 0x650 lma ffffffff88020f90
=> Start address ffffffff88000004
=> Transfer rate: 1093312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 80/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:72 W:0 | mipstx39/jmr3904: complex.exe
Result: invalid
Time: 0:00:00.275897 complex.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x256a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880256a0
=> Loading section .init, size 0x48 lma ffffffff88025710
=> Loading section .fini, size 0x30 lma ffffffff88025758
=> Loading section .ctors, size 0x8 lma ffffffff88025788
=> Loading section .dtors, size 0x8 lma ffffffff88025790
=> Loading section .rdata, size 0x2f88 lma ffffffff880257a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028728
=> Loading section .data, size 0x5f8 lma ffffffff88028740
=> Start address ffffffff88000004
=> Transfer rate: 1337728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 81/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: cpuuse.exe
Result: invalid
Time: 0:00:00.262546 cpuuse.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12fc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012fc0
=> Loading section .init, size 0x48 lma ffffffff88013040
=> Loading section .fini, size 0x30 lma ffffffff88013088
=> Loading section .ctors, size 0x8 lma ffffffff880130b8
=> Loading section .dtors, size 0x8 lma ffffffff880130c0
=> Loading section .rdata, size 0x2524 lma ffffffff880130d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880155f8
=> Loading section .data, size 0x650 lma ffffffff88015610
=> Start address ffffffff88000004
=> Transfer rate: 713376 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 82/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: crypt01.exe
Result: invalid
Time: 0:00:00.271648 crypt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x251c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880251c0
=> Loading section .init, size 0x48 lma ffffffff88025230
=> Loading section .fini, size 0x30 lma ffffffff88025278
=> Loading section .ctors, size 0x8 lma ffffffff880252a8
=> Loading section .dtors, size 0x8 lma ffffffff880252b0
=> Loading section .rdata, size 0x2c48 lma ffffffff880252c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027f08
=> Loading section .data, size 0x624 lma ffffffff88027f20
=> Start address ffffffff88000004
=> Transfer rate: 1321440 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 83/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid
Time: 0:00:00.272685 defaultconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14ab0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014ab0
=> Loading section .init, size 0x48 lma ffffffff88014b30
=> Loading section .fini, size 0x30 lma ffffffff88014b78
=> Loading section .ctors, size 0x8 lma ffffffff88014ba8
=> Loading section .dtors, size 0x8 lma ffffffff88014bb0
=> Loading section .rdata, size 0x1cc0 lma ffffffff88014bc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016880
=> Loading section .data, size 0x5f0 lma ffffffff88016898
=> Start address ffffffff88000004
=> Transfer rate: 750592 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 84/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: devfs01.exe
Result: invalid
Time: 0:00:00.269320 devfs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xd2a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800d2a0
=> Loading section .init, size 0x48 lma ffffffff8800d310
=> Loading section .fini, size 0x30 lma ffffffff8800d358
=> Loading section .ctors, size 0x8 lma ffffffff8800d388
=> Loading section .dtors, size 0x8 lma ffffffff8800d390
=> Loading section .rdata, size 0x1899 lma ffffffff8800d3a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800ec40
=> Loading section .data, size 0x448 lma ffffffff8800ec58
=> Start address ffffffff88000004
=> Transfer rate: 492680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 85/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: devfs04.exe
Result: invalid
Time: 0:00:00.257520 devfs04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xe010 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800e010
=> Loading section .init, size 0x48 lma ffffffff8800e080
=> Loading section .fini, size 0x30 lma ffffffff8800e0c8
=> Loading section .ctors, size 0x8 lma ffffffff8800e0f8
=> Loading section .dtors, size 0x8 lma ffffffff8800e100
=> Loading section .rdata, size 0x1a6d lma ffffffff8800e110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800fb80
=> Loading section .data, size 0x434 lma ffffffff8800fb98
=> Start address ffffffff88000004
=> Transfer rate: 523784 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 86/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: deviceio01.exe
Result: invalid
Time: 0:00:00.275296 deviceio01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010c20
=> Loading section .init, size 0x48 lma ffffffff88010ca0
=> Loading section .fini, size 0x30 lma ffffffff88010ce8
=> Loading section .ctors, size 0x8 lma ffffffff88010d18
=> Loading section .dtors, size 0x8 lma ffffffff88010d20
=> Loading section .rdata, size 0x1b35 lma ffffffff88010d30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012868
=> Loading section .data, size 0x470 lma ffffffff88012880
=> Start address ffffffff88000004
=> Transfer rate: 616232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 87/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid
Time: 0:00:00.267573 devnullfatal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10810 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010810
=> Loading section .init, size 0x48 lma ffffffff88010880
=> Loading section .fini, size 0x30 lma ffffffff880108c8
=> Loading section .ctors, size 0x8 lma ffffffff880108f8
=> Loading section .dtors, size 0x8 lma ffffffff88010900
=> Loading section .rdata, size 0x1f11 lma ffffffff88010910
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012828
=> Loading section .data, size 0x460 lma ffffffff88012840
=> Start address ffffffff88000004
=> Transfer rate: 615560 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 88/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:80 W:0 | mipstx39/jmr3904: dl01.exe
Result: invalid
Time: 0:00:00.277143 dl01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027f50
=> Loading section .init, size 0x48 lma ffffffff88027fc0
=> Loading section .fini, size 0x30 lma ffffffff88028008
=> Loading section .ctors, size 0x8 lma ffffffff88028038
=> Loading section .dtors, size 0x8 lma ffffffff88028040
=> Loading section .rdata, size 0xc0d8 lma ffffffff88028050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88034128
=> Loading section .data, size 0x604 lma ffffffff88034140
=> Start address ffffffff88000004
=> Transfer rate: 1718752 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 89/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl02.exe
Result: invalid
Time: 0:00:00.274373 dl02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27fc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027fc0
=> Loading section .init, size 0x48 lma ffffffff88028030
=> Loading section .fini, size 0x30 lma ffffffff88028078
=> Loading section .ctors, size 0x8 lma ffffffff880280a8
=> Loading section .dtors, size 0x8 lma ffffffff880280b0
=> Loading section .rdata, size 0xe8b0 lma ffffffff880280c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88036970
=> Loading section .data, size 0x5fc lma ffffffff88036988
=> Start address ffffffff88000004
=> Transfer rate: 1801184 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 90/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl03.exe
Result: invalid
Time: 0:00:00.257289 dl03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1bae0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801bae0
=> Loading section .init, size 0x48 lma ffffffff8801bb50
=> Loading section .fini, size 0x30 lma ffffffff8801bb98
=> Loading section .ctors, size 0x8 lma ffffffff8801bbc8
=> Loading section .dtors, size 0x8 lma ffffffff8801bbd0
=> Loading section .rdata, size 0x2d58 lma ffffffff8801bbe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e938
=> Loading section .data, size 0x66c lma ffffffff8801e950
=> Start address ffffffff88000004
=> Transfer rate: 1015200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 91/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl04.exe
Result: invalid
Time: 0:00:00.274014 dl04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27a70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027a70
=> Loading section .init, size 0x48 lma ffffffff88027ae0
=> Loading section .fini, size 0x30 lma ffffffff88027b28
=> Loading section .ctors, size 0x8 lma ffffffff88027b58
=> Loading section .dtors, size 0x8 lma ffffffff88027b60
=> Loading section .rdata, size 0xbfc0 lma ffffffff88027b70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033b30
=> Loading section .data, size 0x5ec lma ffffffff88033b48
=> Start address ffffffff88000004
=> Transfer rate: 1706336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 92/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl05.exe
Result: invalid
Time: 0:00:00.276861 dl05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x3c3f8 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x88 lma ffffffff8803c3f8
=> Loading section .init, size 0x48 lma ffffffff8803c480
=> Loading section .fini, size 0x30 lma ffffffff8803c4c8
=> Loading section .ctors, size 0x18 lma ffffffff8803c4f8
=> Loading section .dtors, size 0x8 lma ffffffff8803c510
=> Loading section .rdata, size 0x149ec lma ffffffff8803c520
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88050f10
=> Loading section .rel.dyn, size 0x18 lma ffffffff88050f28
=> Loading section .data, size 0x69c lma ffffffff88050f40
=> Loading section .sdata, size 0x4 lma ffffffff880515e0
=> Start address ffffffff88000004
=> Transfer rate: 2666144 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 93/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl06.exe
Result: invalid
Time: 0:00:00.269343 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27f20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027f20
=> Loading section .init, size 0x48 lma ffffffff88027f90
=> Loading section .fini, size 0x30 lma ffffffff88027fd8
=> Loading section .ctors, size 0x8 lma ffffffff88028008
=> Loading section .dtors, size 0x8 lma ffffffff88028010
=> Loading section .rdata, size 0xe8a0 lma ffffffff88028020
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880368c0
=> Loading section .data, size 0x5fc lma ffffffff880368d8
=> Start address ffffffff88000004
=> Transfer rate: 1799776 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 94/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl07.exe
Result: invalid
Time: 0:00:00.276968 dl07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28330 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028330
=> Loading section .init, size 0x48 lma ffffffff880283a0
=> Loading section .fini, size 0x30 lma ffffffff880283e8
=> Loading section .ctors, size 0x8 lma ffffffff88028418
=> Loading section .dtors, size 0x8 lma ffffffff88028420
=> Loading section .rdata, size 0x18a78 lma ffffffff88028430
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88040ea8
=> Loading section .data, size 0x5ec lma ffffffff88040ec0
=> Start address ffffffff88000004
=> Transfer rate: 2139424 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 95/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl08.exe
Result: invalid
Time: 0:00:00.261022 dl08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27fe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027fe0
=> Loading section .init, size 0x48 lma ffffffff88028050
=> Loading section .fini, size 0x30 lma ffffffff88028098
=> Loading section .ctors, size 0x8 lma ffffffff880280c8
=> Loading section .dtors, size 0x8 lma ffffffff880280d0
=> Loading section .rdata, size 0x18970 lma ffffffff880280e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88040a50
=> Loading section .data, size 0x5ec lma ffffffff88040a68
=> Start address ffffffff88000004
=> Transfer rate: 2130528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 96/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:88 W:0 | mipstx39/jmr3904: dl09.exe
Result: invalid
Time: 0:00:00.268824 dl09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x28250 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88028250
=> Loading section .init, size 0x48 lma ffffffff880282c0
=> Loading section .fini, size 0x30 lma ffffffff88028308
=> Loading section .ctors, size 0x8 lma ffffffff88028338
=> Loading section .dtors, size 0x8 lma ffffffff88028340
=> Loading section .rdata, size 0x16250 lma ffffffff88028350
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8803e5a0
=> Loading section .data, size 0x5ec lma ffffffff8803e5b8
=> Start address ffffffff88000004
=> Transfer rate: 2055392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 97/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: dl10.exe
Result: invalid
Time: 0:00:00.276901 dl10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x7a370 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8807a370
=> Loading section .init, size 0x48 lma ffffffff8807a3f0
=> Loading section .fini, size 0x30 lma ffffffff8807a438
=> Loading section .ctors, size 0x8 lma ffffffff8807a468
=> Loading section .dtors, size 0x8 lma ffffffff8807a470
=> Loading section .rdata, size 0x26390 lma ffffffff8807a480
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a0810
=> Loading section .data, size 0x1760 lma ffffffff880a0828
=> Start address ffffffff88000004
=> Transfer rate: 5307392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 98/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid
Time: 0:00:00.270135 dumpbuf01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106d0
=> Loading section .init, size 0x48 lma ffffffff88010740
=> Loading section .fini, size 0x30 lma ffffffff88010788
=> Loading section .ctors, size 0x8 lma ffffffff880107b8
=> Loading section .dtors, size 0x8 lma ffffffff880107c0
=> Loading section .rdata, size 0x1b30 lma ffffffff880107d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012300
=> Loading section .data, size 0x480 lma ffffffff88012318
=> Start address ffffffff88000004
=> Transfer rate: 605312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[ 99/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: exit01.exe
Result: invalid
Time: 0:00:00.268518 exit01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108b0
=> Loading section .init, size 0x48 lma ffffffff88010920
=> Loading section .fini, size 0x30 lma ffffffff88010968
=> Loading section .ctors, size 0x8 lma ffffffff88010998
=> Loading section .dtors, size 0x8 lma ffffffff880109a0
=> Loading section .rdata, size 0x1abc lma ffffffff880109b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012470
=> Loading section .data, size 0x458 lma ffffffff88012488
=> Start address ffffffff88000004
=> Transfer rate: 607904 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[100/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: exit02.exe
Result: invalid
Time: 0:00:00.269313 exit02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105a0
=> Loading section .init, size 0x48 lma ffffffff88010610
=> Loading section .fini, size 0x30 lma ffffffff88010658
=> Loading section .ctors, size 0x8 lma ffffffff88010688
=> Loading section .dtors, size 0x8 lma ffffffff88010690
=> Loading section .rdata, size 0x1a75 lma ffffffff880106a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012118
=> Loading section .data, size 0x458 lma ffffffff88012130
=> Start address ffffffff88000004
=> Transfer rate: 601064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[101/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: exit03.exe
Result: invalid
Time: 0:00:00.276204 exit03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x96d88 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x88 lma ffffffff88096d88
=> Loading section .init, size 0x48 lma ffffffff88096e10
=> Loading section .fini, size 0x30 lma ffffffff88096e58
=> Loading section .ctors, size 0x34 lma ffffffff88096e88
=> Loading section .dtors, size 0x8 lma ffffffff88096ebc
=> Loading section .rdata, size 0xa444 lma ffffffff88096ed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a1318
=> Loading section .rel.dyn, size 0x20 lma ffffffff880a1330
=> Loading section .data, size 0x768 lma ffffffff880a1350
=> Loading section .sdata, size 0x4 lma ffffffff880a1ab8
=> Start address ffffffff88000004
=> Transfer rate: 5297504 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[102/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: flashdisk01.exe
Result: invalid
Time: 0:00:00.275903 flashdisk01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x308f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880308f0
=> Loading section .init, size 0x48 lma ffffffff88030970
=> Loading section .fini, size 0x30 lma ffffffff880309b8
=> Loading section .ctors, size 0x8 lma ffffffff880309e8
=> Loading section .dtors, size 0x8 lma ffffffff880309f0
=> Loading section .rdata, size 0x6318 lma ffffffff88030a00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88036d18
=> Loading section .data, size 0x608 lma ffffffff88036d30
=> Start address ffffffff88000004
=> Transfer rate: 1808768 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[103/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: getentropy01.exe
Result: invalid
Time: 0:00:00.265775 getentropy01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfcf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fcf0
=> Loading section .init, size 0x48 lma ffffffff8800fd60
=> Loading section .fini, size 0x30 lma ffffffff8800fda8
=> Loading section .ctors, size 0x8 lma ffffffff8800fdd8
=> Loading section .dtors, size 0x8 lma ffffffff8800fde0
=> Loading section .rdata, size 0x1a2d lma ffffffff8800fdf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011820
=> Loading section .data, size 0x448 lma ffffffff88011838
=> Start address ffffffff88000004
=> Transfer rate: 582568 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[104/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:96 W:0 | mipstx39/jmr3904: heapwalk.exe
Result: invalid
Time: 0:00:00.272556 heapwalk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11230 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011230
=> Loading section .init, size 0x48 lma ffffffff880112a0
=> Loading section .fini, size 0x30 lma ffffffff880112e8
=> Loading section .ctors, size 0x8 lma ffffffff88011318
=> Loading section .dtors, size 0x8 lma ffffffff88011320
=> Loading section .rdata, size 0x2435 lma ffffffff88011330
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013768
=> Loading section .data, size 0x458 lma ffffffff88013780
=> Start address ffffffff88000004
=> Transfer rate: 646760 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[105/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: i2c01.exe
Result: invalid
Time: 0:00:00.270319 i2c01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15810 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015810
=> Loading section .init, size 0x48 lma ffffffff88015880
=> Loading section .fini, size 0x30 lma ffffffff880158c8
=> Loading section .ctors, size 0x8 lma ffffffff880158f8
=> Loading section .dtors, size 0x8 lma ffffffff88015900
=> Loading section .rdata, size 0x1fe9 lma ffffffff88015910
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017900
=> Loading section .data, size 0x488 lma ffffffff88017918
=> Start address ffffffff88000004
=> Transfer rate: 781448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[106/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: irqs01.exe
Result: invalid
Time: 0:00:00.274888 irqs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff88017520
=> Loading section .init, size 0x48 lma ffffffff880175b0
=> Loading section .fini, size 0x30 lma ffffffff880175f8
=> Loading section .ctors, size 0x8 lma ffffffff88017628
=> Loading section .dtors, size 0x8 lma ffffffff88017630
=> Loading section .rdata, size 0x24e8 lma ffffffff88017640
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019b28
=> Loading section .data, size 0x4d8 lma ffffffff88019b40
=> Start address ffffffff88000004
=> Transfer rate: 852096 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[107/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: libfdt01.exe
Result: invalid
Time: 0:00:00.272502 libfdt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11dc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011dc0
=> Loading section .init, size 0x48 lma ffffffff88011e30
=> Loading section .fini, size 0x30 lma ffffffff88011e78
=> Loading section .ctors, size 0x8 lma ffffffff88011ea8
=> Loading section .dtors, size 0x8 lma ffffffff88011eb0
=> Loading section .rdata, size 0x1ded lma ffffffff88011ec0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013cb0
=> Loading section .data, size 0x458 lma ffffffff88013cc8
=> Start address ffffffff88000004
=> Transfer rate: 657576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[108/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: malloc02.exe
Result: invalid
Time: 0:00:00.261974 malloc02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010a50
=> Loading section .init, size 0x48 lma ffffffff88010ad0
=> Loading section .fini, size 0x30 lma ffffffff88010b18
=> Loading section .ctors, size 0x8 lma ffffffff88010b48
=> Loading section .dtors, size 0x8 lma ffffffff88010b50
=> Loading section .rdata, size 0x1ea9 lma ffffffff88010b60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a10
=> Loading section .data, size 0x488 lma ffffffff88012a28
=> Start address ffffffff88000004
=> Transfer rate: 619784 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[109/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: malloc03.exe
Result: invalid
Time: 0:00:00.258923 malloc03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f840
=> Loading section .init, size 0x48 lma ffffffff8800f8b0
=> Loading section .fini, size 0x30 lma ffffffff8800f8f8
=> Loading section .ctors, size 0x8 lma ffffffff8800f928
=> Loading section .dtors, size 0x8 lma ffffffff8800f930
=> Loading section .rdata, size 0x19d9 lma ffffffff8800f940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011320
=> Loading section .data, size 0x448 lma ffffffff88011338
=> Start address ffffffff88000004
=> Transfer rate: 572296 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[110/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: malloc04.exe
Result: invalid
Time: 0:00:00.264215 malloc04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010fa0
=> Loading section .init, size 0x48 lma ffffffff88011010
=> Loading section .fini, size 0x30 lma ffffffff88011058
=> Loading section .ctors, size 0x8 lma ffffffff88011088
=> Loading section .dtors, size 0x8 lma ffffffff88011090
=> Loading section .rdata, size 0x1aa9 lma ffffffff880110a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b50
=> Loading section .data, size 0x460 lma ffffffff88012b68
=> Start address ffffffff88000004
=> Transfer rate: 622024 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[111/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: malloctest.exe
Result: invalid
Time: 0:00:00.270399 malloctest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17080 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88017080
=> Loading section .init, size 0x48 lma ffffffff88017100
=> Loading section .fini, size 0x30 lma ffffffff88017148
=> Loading section .ctors, size 0x8 lma ffffffff88017178
=> Loading section .dtors, size 0x8 lma ffffffff88017180
=> Loading section .rdata, size 0x40c4 lma ffffffff88017190
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b258
=> Loading section .data, size 0x638 lma ffffffff8801b270
=> Start address ffffffff88000004
=> Transfer rate: 902368 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[112/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:104 W:0 | mipstx39/jmr3904: math.exe
Result: invalid
Time: 0:00:00.276202 math.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27c00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88027c00
=> Loading section .init, size 0x48 lma ffffffff88027c70
=> Loading section .fini, size 0x30 lma ffffffff88027cb8
=> Loading section .ctors, size 0x8 lma ffffffff88027ce8
=> Loading section .dtors, size 0x8 lma ffffffff88027cf0
=> Loading section .rdata, size 0x3990 lma ffffffff88027d00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b690
=> Loading section .data, size 0x608 lma ffffffff8802b6a8
=> Start address ffffffff88000004
=> Transfer rate: 1434944 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[113/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: mathf.exe
Result: invalid
Time: 0:00:00.270972 mathf.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x24130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88024130
=> Loading section .init, size 0x48 lma ffffffff880241a0
=> Loading section .fini, size 0x30 lma ffffffff880241e8
=> Loading section .ctors, size 0x8 lma ffffffff88024218
=> Loading section .dtors, size 0x8 lma ffffffff88024220
=> Loading section .rdata, size 0x3300 lma ffffffff88024230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027530
=> Loading section .data, size 0x5f0 lma ffffffff88027548
=> Start address ffffffff88000004
=> Transfer rate: 1300864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[114/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: mathl.exe
Result: invalid
Time: 0:00:00.275244 mathl.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17f80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017f80
=> Loading section .init, size 0x48 lma ffffffff88017ff0
=> Loading section .fini, size 0x30 lma ffffffff88018038
=> Loading section .ctors, size 0x8 lma ffffffff88018068
=> Loading section .dtors, size 0x8 lma ffffffff88018070
=> Loading section .rdata, size 0x1fe0 lma ffffffff88018080
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a060
=> Loading section .data, size 0x5e0 lma ffffffff8801a078
=> Start address ffffffff88000004
=> Transfer rate: 864896 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[115/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: md501.exe
Result: invalid
Time: 0:00:00.272714 md501.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11630 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011630
=> Loading section .init, size 0x48 lma ffffffff880116a0
=> Loading section .fini, size 0x30 lma ffffffff880116e8
=> Loading section .ctors, size 0x8 lma ffffffff88011718
=> Loading section .dtors, size 0x8 lma ffffffff88011720
=> Loading section .rdata, size 0x1c9d lma ffffffff88011730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133d0
=> Loading section .data, size 0x498 lma ffffffff880133e8
=> Start address ffffffff88000004
=> Transfer rate: 639912 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[116/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: monitor.exe
Result: invalid
Time: 0:00:00.271063 monitor.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x27cd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88027cd0
=> Loading section .init, size 0x48 lma ffffffff88027d50
=> Loading section .fini, size 0x30 lma ffffffff88027d98
=> Loading section .ctors, size 0x8 lma ffffffff88027dc8
=> Loading section .dtors, size 0x8 lma ffffffff88027dd0
=> Loading section .rdata, size 0x493c lma ffffffff88027de0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c720
=> Loading section .data, size 0x800 lma ffffffff8802c738
=> Start address ffffffff88000004
=> Transfer rate: 1472864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[117/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: monitor02.exe
Result: invalid
Time: 0:00:00.261768 monitor02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20600 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88020600
=> Loading section .init, size 0x48 lma ffffffff88020680
=> Loading section .fini, size 0x30 lma ffffffff880206c8
=> Loading section .ctors, size 0x8 lma ffffffff880206f8
=> Loading section .dtors, size 0x8 lma ffffffff88020700
=> Loading section .rdata, size 0x3760 lma ffffffff88020710
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023e70
=> Loading section .data, size 0x888 lma ffffffff88023e88
=> Start address ffffffff88000004
=> Transfer rate: 1194048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[118/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: mouse01.exe
Result: invalid
Time: 0:00:00.268437 mouse01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1cb30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801cb30
=> Loading section .init, size 0x48 lma ffffffff8801cbb0
=> Loading section .fini, size 0x30 lma ffffffff8801cbf8
=> Loading section .ctors, size 0x8 lma ffffffff8801cc28
=> Loading section .dtors, size 0x8 lma ffffffff8801cc30
=> Loading section .rdata, size 0x2904 lma ffffffff8801cc40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f548
=> Loading section .data, size 0x690 lma ffffffff8801f560
=> Start address ffffffff88000004
=> Transfer rate: 1040160 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[119/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: newlib01.exe
Result: invalid
Time: 0:00:00.276786 newlib01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15ad0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015ad0
=> Loading section .init, size 0x48 lma ffffffff88015b50
=> Loading section .fini, size 0x30 lma ffffffff88015b98
=> Loading section .ctors, size 0x8 lma ffffffff88015bc8
=> Loading section .dtors, size 0x8 lma ffffffff88015bd0
=> Loading section .rdata, size 0x1d80 lma ffffffff88015be0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017960
=> Loading section .data, size 0x490 lma ffffffff88017978
=> Start address ffffffff88000004
=> Transfer rate: 782336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[120/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:112 W:0 | mipstx39/jmr3904: ofw01.exe
Result: invalid
Time: 0:00:00.274045 ofw01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013190
=> Loading section .init, size 0x48 lma ffffffff88013210
=> Loading section .fini, size 0x30 lma ffffffff88013258
=> Loading section .ctors, size 0x8 lma ffffffff88013288
=> Loading section .dtors, size 0x8 lma ffffffff88013290
=> Loading section .rdata, size 0x2001 lma ffffffff880132a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880152a8
=> Loading section .data, size 0x458 lma ffffffff880152c0
=> Start address ffffffff88000004
=> Transfer rate: 702536 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[121/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: putenvtest.exe
Result: invalid
Time: 0:00:00.268945 putenvtest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f50
=> Loading section .init, size 0x48 lma ffffffff88010fc0
=> Loading section .fini, size 0x30 lma ffffffff88011008
=> Loading section .ctors, size 0x8 lma ffffffff88011038
=> Loading section .dtors, size 0x8 lma ffffffff88011040
=> Loading section .rdata, size 0x19f1 lma ffffffff88011050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a48
=> Loading section .data, size 0x45c lma ffffffff88012a60
=> Start address ffffffff88000004
=> Transfer rate: 619880 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[122/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid
Time: 0:00:00.261479 pwdgrp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014970
=> Loading section .init, size 0x48 lma ffffffff880149e0
=> Loading section .fini, size 0x30 lma ffffffff88014a28
=> Loading section .ctors, size 0x8 lma ffffffff88014a58
=> Loading section .dtors, size 0x8 lma ffffffff88014a60
=> Loading section .rdata, size 0x1e14 lma ffffffff88014a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016888
=> Loading section .data, size 0x4d8 lma ffffffff880168a0
=> Start address ffffffff88000004
=> Transfer rate: 748384 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[123/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid
Time: 0:00:00.270979 pwdgrp02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013520
=> Loading section .init, size 0x48 lma ffffffff88013590
=> Loading section .fini, size 0x30 lma ffffffff880135d8
=> Loading section .ctors, size 0x8 lma ffffffff88013608
=> Loading section .dtors, size 0x8 lma ffffffff88013610
=> Loading section .rdata, size 0x1d8c lma ffffffff88013620
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880153b0
=> Loading section .data, size 0x470 lma ffffffff880153c8
=> Start address ffffffff88000004
=> Transfer rate: 704864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[124/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: rbheap01.exe
Result: invalid
Time: 0:00:00.254460 rbheap01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11760 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011760
=> Loading section .init, size 0x48 lma ffffffff880117d0
=> Loading section .fini, size 0x30 lma ffffffff88011818
=> Loading section .ctors, size 0x8 lma ffffffff88011848
=> Loading section .dtors, size 0x8 lma ffffffff88011850
=> Loading section .rdata, size 0x1ced lma ffffffff88011860
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013550
=> Loading section .data, size 0x460 lma ffffffff88013568
=> Start address ffffffff88000004
=> Transfer rate: 642536 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[125/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: rcxx01.exe
Result: invalid
Time: 0:00:00.262007 rcxx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x9b67c lma ffffffff88000000
=> Loading section .rtemsroset, size 0x84 lma ffffffff8809b67c
=> Loading section .init, size 0x48 lma ffffffff8809b700
=> Loading section .fini, size 0x30 lma ffffffff8809b748
=> Loading section .ctors, size 0x44 lma ffffffff8809b778
=> Loading section .dtors, size 0x8 lma ffffffff8809b7bc
=> Loading section .rdata, size 0xab74 lma ffffffff8809b7d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a6348
=> Loading section .rel.dyn, size 0x18 lma ffffffff880a6360
=> Loading section .data, size 0x7e8 lma ffffffff880a6378
=> Loading section .sdata, size 0x4 lma ffffffff880a6b60
=> Start address ffffffff88000004
=> Transfer rate: 5462688 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[126/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: record01.exe
Result: invalid
Time: 0:00:00.272604 record01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011700
=> Loading section .init, size 0x48 lma ffffffff88011770
=> Loading section .fini, size 0x30 lma ffffffff880117b8
=> Loading section .ctors, size 0x8 lma ffffffff880117e8
=> Loading section .dtors, size 0x8 lma ffffffff880117f0
=> Loading section .rdata, size 0x1ed5 lma ffffffff88011800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136d8
=> Loading section .data, size 0x458 lma ffffffff880136f0
=> Start address ffffffff88000004
=> Transfer rate: 645608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[127/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: record02.exe
Result: invalid
Time: 0:00:00.273300 record02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x195a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880195a0
=> Loading section .init, size 0x48 lma ffffffff88019620
=> Loading section .fini, size 0x30 lma ffffffff88019668
=> Loading section .ctors, size 0x8 lma ffffffff88019698
=> Loading section .dtors, size 0x8 lma ffffffff880196a0
=> Loading section .rdata, size 0x8c09 lma ffffffff880196b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880222c0
=> Loading section .data, size 0x498 lma ffffffff880222d8
=> Start address ffffffff88000004
=> Transfer rate: 1129224 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[128/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:120 W:0 | mipstx39/jmr3904: rtmonuse.exe
Result: invalid
Time: 0:00:00.265237 rtmonuse.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012900
=> Loading section .init, size 0x48 lma ffffffff88012980
=> Loading section .fini, size 0x30 lma ffffffff880129c8
=> Loading section .ctors, size 0x8 lma ffffffff880129f8
=> Loading section .dtors, size 0x8 lma ffffffff88012a00
=> Loading section .rdata, size 0x2338 lma ffffffff88012a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d48
=> Loading section .data, size 0x4d8 lma ffffffff88014d60
=> Start address ffffffff88000004
=> Transfer rate: 692608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[129/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: sha.exe
Result: invalid
Time: 0:00:00.292716 sha.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1bf20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801bf20
=> Loading section .init, size 0x48 lma ffffffff8801bf90
=> Loading section .fini, size 0x30 lma ffffffff8801bfd8
=> Loading section .ctors, size 0x8 lma ffffffff8801c008
=> Loading section .dtors, size 0x8 lma ffffffff8801c010
=> Loading section .rdata, size 0x1f31 lma ffffffff8801c020
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801df58
=> Loading section .data, size 0x450 lma ffffffff8801df70
=> Start address ffffffff88000004
=> Transfer rate: 990600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[130/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: shell01.exe
Result: invalid
Time: 0:00:00.275851 shell01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x31a50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88031a50
=> Loading section .init, size 0x48 lma ffffffff88031ad0
=> Loading section .fini, size 0x30 lma ffffffff88031b18
=> Loading section .ctors, size 0x8 lma ffffffff88031b48
=> Loading section .dtors, size 0x8 lma ffffffff88031b50
=> Loading section .rdata, size 0x5ed0 lma ffffffff88031b60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88037a30
=> Loading section .data, size 0x980 lma ffffffff88037a48
=> Start address ffffffff88000004
=> Transfer rate: 1842688 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[131/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid
Time: 0:00:00.268560 sparsedisk01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016ee0
=> Loading section .init, size 0x48 lma ffffffff88016f50
=> Loading section .fini, size 0x30 lma ffffffff88016f98
=> Loading section .ctors, size 0x8 lma ffffffff88016fc8
=> Loading section .dtors, size 0x8 lma ffffffff88016fd0
=> Loading section .rdata, size 0x1d59 lma ffffffff88016fe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018d40
=> Loading section .data, size 0x480 lma ffffffff88018d58
=> Start address ffffffff88000004
=> Transfer rate: 822856 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[132/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: spi01.exe
Result: invalid
Time: 0:00:00.270866 spi01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011ef0
=> Loading section .init, size 0x48 lma ffffffff88011f60
=> Loading section .fini, size 0x30 lma ffffffff88011fa8
=> Loading section .ctors, size 0x8 lma ffffffff88011fd8
=> Loading section .dtors, size 0x8 lma ffffffff88011fe0
=> Loading section .rdata, size 0x1ca1 lma ffffffff88011ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c98
=> Loading section .data, size 0x498 lma ffffffff88013cb0
=> Start address ffffffff88000004
=> Transfer rate: 657864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[133/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: stackchk.exe
Result: invalid
Time: 0:00:00.297554 stackchk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x125a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880125a0
=> Loading section .init, size 0x48 lma ffffffff88012620
=> Loading section .fini, size 0x30 lma ffffffff88012668
=> Loading section .ctors, size 0x8 lma ffffffff88012698
=> Loading section .dtors, size 0x8 lma ffffffff880126a0
=> Loading section .rdata, size 0x2308 lma ffffffff880126b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880149b8
=> Loading section .data, size 0x600 lma ffffffff880149d0
=> Start address ffffffff88000004
=> Transfer rate: 687680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[134/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: stackchk01.exe
Result: invalid
Time: 0:00:00.273431 stackchk01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfbe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fbe0
=> Loading section .init, size 0x48 lma ffffffff8800fc50
=> Loading section .fini, size 0x30 lma ffffffff8800fc98
=> Loading section .ctors, size 0x8 lma ffffffff8800fcc8
=> Loading section .dtors, size 0x8 lma ffffffff8800fcd0
=> Loading section .rdata, size 0x1b01 lma ffffffff8800fce0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117e8
=> Loading section .data, size 0x450 lma ffffffff88011800
=> Start address ffffffff88000004
=> Transfer rate: 582152 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[135/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: stackchk02.exe
Result: invalid
Time: 0:00:00.270143 stackchk02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfad0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fad0
=> Loading section .init, size 0x48 lma ffffffff8800fb40
=> Loading section .fini, size 0x30 lma ffffffff8800fb88
=> Loading section .ctors, size 0x8 lma ffffffff8800fbb8
=> Loading section .dtors, size 0x8 lma ffffffff8800fbc0
=> Loading section .rdata, size 0x1a4d lma ffffffff8800fbd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011620
=> Loading section .data, size 0x450 lma ffffffff88011638
=> Start address ffffffff88000004
=> Transfer rate: 578536 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[136/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:128 W:0 | mipstx39/jmr3904: stringto01.exe
Result: invalid
Time: 0:00:00.267651 stringto01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x172d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880172d0
=> Loading section .init, size 0x48 lma ffffffff88017340
=> Loading section .fini, size 0x30 lma ffffffff88017388
=> Loading section .ctors, size 0x8 lma ffffffff880173b8
=> Loading section .dtors, size 0x8 lma ffffffff880173c0
=> Loading section .rdata, size 0x3a38 lma ffffffff880173d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ae08
=> Loading section .data, size 0x5b8 lma ffffffff8801ae20
=> Start address ffffffff88000004
=> Transfer rate: 892544 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[137/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: tar01.exe
Result: invalid
Time: 0:00:00.275879 tar01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15ce0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88015ce0
=> Loading section .init, size 0x48 lma ffffffff88015d50
=> Loading section .fini, size 0x30 lma ffffffff88015d98
=> Loading section .ctors, size 0x8 lma ffffffff88015dc8
=> Loading section .dtors, size 0x8 lma ffffffff88015dd0
=> Loading section .rdata, size 0x86c4 lma ffffffff88015de0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e4a8
=> Loading section .data, size 0x448 lma ffffffff8801e4c0
=> Start address ffffffff88000004
=> Transfer rate: 1001440 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[138/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: tar02.exe
Result: invalid
Time: 0:00:00.264884 tar02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011830
=> Loading section .init, size 0x48 lma ffffffff880118a0
=> Loading section .fini, size 0x30 lma ffffffff880118e8
=> Loading section .ctors, size 0x8 lma ffffffff88011918
=> Loading section .dtors, size 0x8 lma ffffffff88011920
=> Loading section .rdata, size 0x52d0 lma ffffffff88011930
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c00
=> Loading section .data, size 0x448 lma ffffffff88016c18
=> Start address ffffffff88000004
=> Transfer rate: 754368 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[139/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: tar03.exe
Result: invalid
Time: 0:00:00.271104 tar03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11920 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011920
=> Loading section .init, size 0x48 lma ffffffff88011990
=> Loading section .fini, size 0x30 lma ffffffff880119d8
=> Loading section .ctors, size 0x8 lma ffffffff88011a08
=> Loading section .dtors, size 0x8 lma ffffffff88011a10
=> Loading section .rdata, size 0x255c lma ffffffff88011a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f80
=> Loading section .data, size 0x458 lma ffffffff88013f98
=> Start address ffffffff88000004
=> Transfer rate: 663328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[140/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: termios.exe
Result: invalid
Time: 0:00:00.271183 termios.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x24f70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88024f70
=> Loading section .init, size 0x48 lma ffffffff88024fe0
=> Loading section .fini, size 0x30 lma ffffffff88025028
=> Loading section .ctors, size 0x8 lma ffffffff88025058
=> Loading section .dtors, size 0x8 lma ffffffff88025060
=> Loading section .rdata, size 0x447c lma ffffffff88025070
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880294f0
=> Loading section .data, size 0x5d0 lma ffffffff88029508
=> Start address ffffffff88000004
=> Transfer rate: 1365600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[141/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: termios01.exe
Result: invalid
Time: 0:00:00.269115 termios01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x177e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880177e0
=> Loading section .init, size 0x48 lma ffffffff88017860
=> Loading section .fini, size 0x30 lma ffffffff880178a8
=> Loading section .ctors, size 0x8 lma ffffffff880178d8
=> Loading section .dtors, size 0x8 lma ffffffff880178e0
=> Loading section .rdata, size 0x3ae0 lma ffffffff880178f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b3d0
=> Loading section .data, size 0x518 lma ffffffff8801b3e8
=> Start address ffffffff88000004
=> Transfer rate: 903104 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[142/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: termios02.exe
Result: invalid
Time: 0:00:00.273565 termios02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13a80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013a80
=> Loading section .init, size 0x48 lma ffffffff88013af0
=> Loading section .fini, size 0x30 lma ffffffff88013b38
=> Loading section .ctors, size 0x8 lma ffffffff88013b68
=> Loading section .dtors, size 0x8 lma ffffffff88013b70
=> Loading section .rdata, size 0x1e2c lma ffffffff88013b80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880159b0
=> Loading section .data, size 0x448 lma ffffffff880159c8
=> Start address ffffffff88000004
=> Transfer rate: 716832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[143/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: termios03.exe
Result: invalid
Time: 0:00:00.267155 termios03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14a70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014a70
=> Loading section .init, size 0x48 lma ffffffff88014af0
=> Loading section .fini, size 0x30 lma ffffffff88014b38
=> Loading section .ctors, size 0x8 lma ffffffff88014b68
=> Loading section .dtors, size 0x8 lma ffffffff88014b70
=> Loading section .rdata, size 0x2218 lma ffffffff88014b80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016d98
=> Loading section .data, size 0x4a0 lma ffffffff88016db0
=> Start address ffffffff88000004
=> Transfer rate: 758336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[144/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:136 W:0 | mipstx39/jmr3904: termios04.exe
Result: invalid
Time: 0:00:00.266720 termios04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14dc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014dc0
=> Loading section .init, size 0x48 lma ffffffff88014e40
=> Loading section .fini, size 0x30 lma ffffffff88014e88
=> Loading section .ctors, size 0x8 lma ffffffff88014eb8
=> Loading section .dtors, size 0x8 lma ffffffff88014ec0
=> Loading section .rdata, size 0x2154 lma ffffffff88014ed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017028
=> Loading section .data, size 0x4d0 lma ffffffff88017040
=> Start address ffffffff88000004
=> Transfer rate: 763936 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[145/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios05.exe
Result: invalid
Time: 0:00:00.260386 termios05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15180 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015180
=> Loading section .init, size 0x48 lma ffffffff88015200
=> Loading section .fini, size 0x30 lma ffffffff88015248
=> Loading section .ctors, size 0x8 lma ffffffff88015278
=> Loading section .dtors, size 0x8 lma ffffffff88015280
=> Loading section .rdata, size 0x21b8 lma ffffffff88015290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017448
=> Loading section .data, size 0x4d0 lma ffffffff88017460
=> Start address ffffffff88000004
=> Transfer rate: 772416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[146/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios06.exe
Result: invalid
Time: 0:00:00.277618 termios06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14e70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014e70
=> Loading section .init, size 0x48 lma ffffffff88014ef0
=> Loading section .fini, size 0x30 lma ffffffff88014f38
=> Loading section .ctors, size 0x8 lma ffffffff88014f68
=> Loading section .dtors, size 0x8 lma ffffffff88014f70
=> Loading section .rdata, size 0x2308 lma ffffffff88014f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017288
=> Loading section .data, size 0x4b0 lma ffffffff880172a0
=> Start address ffffffff88000004
=> Transfer rate: 768576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[147/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios07.exe
Result: invalid
Time: 0:00:00.272799 termios07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014ee0
=> Loading section .init, size 0x48 lma ffffffff88014f60
=> Loading section .fini, size 0x30 lma ffffffff88014fa8
=> Loading section .ctors, size 0x8 lma ffffffff88014fd8
=> Loading section .dtors, size 0x8 lma ffffffff88014fe0
=> Loading section .rdata, size 0x21dc lma ffffffff88014ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880171d0
=> Loading section .data, size 0x4d0 lma ffffffff880171e8
=> Start address ffffffff88000004
=> Transfer rate: 767328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[148/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios08.exe
Result: invalid
Time: 0:00:00.270270 termios08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x146a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880146a0
=> Loading section .init, size 0x48 lma ffffffff88014720
=> Loading section .fini, size 0x30 lma ffffffff88014768
=> Loading section .ctors, size 0x8 lma ffffffff88014798
=> Loading section .dtors, size 0x8 lma ffffffff880147a0
=> Loading section .rdata, size 0x2144 lma ffffffff880147b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880168f8
=> Loading section .data, size 0x4a0 lma ffffffff88016910
=> Start address ffffffff88000004
=> Transfer rate: 748832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[149/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios09.exe
Result: invalid
Time: 0:00:00.272513 termios09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19150 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019150
=> Loading section .init, size 0x48 lma ffffffff880191c0
=> Loading section .fini, size 0x30 lma ffffffff88019208
=> Loading section .ctors, size 0x8 lma ffffffff88019238
=> Loading section .dtors, size 0x8 lma ffffffff88019240
=> Loading section .rdata, size 0x2348 lma ffffffff88019250
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b598
=> Loading section .data, size 0x650 lma ffffffff8801b5b0
=> Start address ffffffff88000004
=> Transfer rate: 909248 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[150/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios10.exe
Result: invalid
Time: 0:00:00.276291 termios10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16880 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016880
=> Loading section .init, size 0x48 lma ffffffff88016900
=> Loading section .fini, size 0x30 lma ffffffff88016948
=> Loading section .ctors, size 0x8 lma ffffffff88016978
=> Loading section .dtors, size 0x8 lma ffffffff88016980
=> Loading section .rdata, size 0x23cc lma ffffffff88016990
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018d60
=> Loading section .data, size 0x520 lma ffffffff88018d78
=> Start address ffffffff88000004
=> Transfer rate: 824416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[151/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: termios11.exe
Result: invalid
Time: 0:00:00.270808 termios11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016f50
=> Loading section .init, size 0x48 lma ffffffff88016fd0
=> Loading section .fini, size 0x30 lma ffffffff88017018
=> Loading section .ctors, size 0x8 lma ffffffff88017048
=> Loading section .dtors, size 0x8 lma ffffffff88017050
=> Loading section .rdata, size 0x23e4 lma ffffffff88017060
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019448
=> Loading section .data, size 0x550 lma ffffffff88019460
=> Start address ffffffff88000004
=> Transfer rate: 838944 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[152/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:144 W:0 | mipstx39/jmr3904: top.exe
Result: invalid
Time: 0:00:00.272920 top.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1f010 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801f010
=> Loading section .init, size 0x48 lma ffffffff8801f080
=> Loading section .fini, size 0x30 lma ffffffff8801f0c8
=> Loading section .ctors, size 0x8 lma ffffffff8801f0f8
=> Loading section .dtors, size 0x8 lma ffffffff8801f100
=> Loading section .rdata, size 0x2c30 lma ffffffff8801f110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021d40
=> Loading section .data, size 0x5ec lma ffffffff88021d58
=> Start address ffffffff88000004
=> Transfer rate: 1120736 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[153/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: ttest01.exe
Result: invalid
Time: 0:00:00.265919 ttest01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x25680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb60 lma ffffffff88025680
=> Loading section .init, size 0x48 lma ffffffff880261e0
=> Loading section .fini, size 0x30 lma ffffffff88026228
=> Loading section .ctors, size 0x8 lma ffffffff88026258
=> Loading section .dtors, size 0x8 lma ffffffff88026260
=> Loading section .rdata, size 0x1c218 lma ffffffff88026270
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88042488
=> Loading section .data, size 0x1b88 lma ffffffff880424a0
=> Start address ffffffff88000004
=> Transfer rate: 2228480 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[154/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: ttest02.exe
Result: invalid
Time: 0:00:00.276191 ttest02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x180b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff880180b0
=> Loading section .init, size 0x48 lma ffffffff88018140
=> Loading section .fini, size 0x30 lma ffffffff88018188
=> Loading section .ctors, size 0x8 lma ffffffff880181b8
=> Loading section .dtors, size 0x8 lma ffffffff880181c0
=> Loading section .rdata, size 0x25bc lma ffffffff880181d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a790
=> Loading section .data, size 0x5d0 lma ffffffff8801a7a8
=> Start address ffffffff88000004
=> Transfer rate: 879456 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[155/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: tztest.exe
Result: invalid
Time: 0:00:00.267621 tztest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16200 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016200
=> Loading section .init, size 0x48 lma ffffffff88016270
=> Loading section .fini, size 0x30 lma ffffffff880162b8
=> Loading section .ctors, size 0x8 lma ffffffff880162e8
=> Loading section .dtors, size 0x8 lma ffffffff880162f0
=> Loading section .rdata, size 0x24ac lma ffffffff88016300
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880187b0
=> Loading section .data, size 0x654 lma ffffffff880187c8
=> Start address ffffffff88000004
=> Transfer rate: 815232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[156/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: uid01.exe
Result: invalid
Time: 0:00:00.272057 uid01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801c910
=> Loading section .init, size 0x48 lma ffffffff8801c990
=> Loading section .fini, size 0x30 lma ffffffff8801c9d8
=> Loading section .ctors, size 0x8 lma ffffffff8801ca08
=> Loading section .dtors, size 0x8 lma ffffffff8801ca10
=> Loading section .rdata, size 0x2864 lma ffffffff8801ca20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f288
=> Loading section .data, size 0x690 lma ffffffff8801f2a0
=> Start address ffffffff88000004
=> Transfer rate: 1034528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[157/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: utf8proc01.exe
Result: invalid
Time: 0:00:00.257973 utf8proc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880120c0
=> Loading section .init, size 0x48 lma ffffffff88012130
=> Loading section .fini, size 0x30 lma ffffffff88012178
=> Loading section .ctors, size 0x8 lma ffffffff880121a8
=> Loading section .dtors, size 0x8 lma ffffffff880121b0
=> Loading section .rdata, size 0x6cf2d lma ffffffff880121c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8807f0f0
=> Loading section .data, size 0x458 lma ffffffff8807f108
=> Start address ffffffff88000004
=> Transfer rate: 4172456 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[158/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: psx01.exe
Result: invalid
Time: 0:00:00.272001 psx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17870 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017870
=> Loading section .init, size 0x48 lma ffffffff880178e0
=> Loading section .fini, size 0x30 lma ffffffff88017928
=> Loading section .ctors, size 0x8 lma ffffffff88017958
=> Loading section .dtors, size 0x8 lma ffffffff88017960
=> Loading section .rdata, size 0x2520 lma ffffffff88017970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019e90
=> Loading section .data, size 0x5cc lma ffffffff88019ea8
=> Start address ffffffff88000004
=> Transfer rate: 861024 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[159/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: psx02.exe
Result: invalid
Time: 0:00:00.273849 psx02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a7d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801a7d0
=> Loading section .init, size 0x48 lma ffffffff8801a850
=> Loading section .fini, size 0x30 lma ffffffff8801a898
=> Loading section .ctors, size 0x8 lma ffffffff8801a8c8
=> Loading section .dtors, size 0x8 lma ffffffff8801a8d0
=> Loading section .rdata, size 0x25f4 lma ffffffff8801a8e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ced8
=> Loading section .data, size 0x660 lma ffffffff8801cef0
=> Start address ffffffff88000004
=> Transfer rate: 961056 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[160/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:152 W:0 | mipstx39/jmr3904: psx03.exe
Result: invalid
Time: 0:00:00.272438 psx03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ada0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801ada0
=> Loading section .init, size 0x48 lma ffffffff8801ae20
=> Loading section .fini, size 0x30 lma ffffffff8801ae68
=> Loading section .ctors, size 0x8 lma ffffffff8801ae98
=> Loading section .dtors, size 0x8 lma ffffffff8801aea0
=> Loading section .rdata, size 0x26f8 lma ffffffff8801aeb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d5a8
=> Loading section .data, size 0x660 lma ffffffff8801d5c0
=> Start address ffffffff88000004
=> Transfer rate: 975040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[161/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx04.exe
Result: invalid
Time: 0:00:00.270105 psx04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a9b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801a9b0
=> Loading section .init, size 0x48 lma ffffffff8801aa30
=> Loading section .fini, size 0x30 lma ffffffff8801aa78
=> Loading section .ctors, size 0x8 lma ffffffff8801aaa8
=> Loading section .dtors, size 0x8 lma ffffffff8801aab0
=> Loading section .rdata, size 0x381c lma ffffffff8801aac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e2e0
=> Loading section .data, size 0x68c lma ffffffff8801e2f8
=> Start address ffffffff88000004
=> Transfer rate: 1002432 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[162/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx05.exe
Result: invalid
Time: 0:00:00.264588 psx05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c080 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801c080
=> Loading section .init, size 0x48 lma ffffffff8801c0f0
=> Loading section .fini, size 0x30 lma ffffffff8801c138
=> Loading section .ctors, size 0x8 lma ffffffff8801c168
=> Loading section .dtors, size 0x8 lma ffffffff8801c170
=> Loading section .rdata, size 0x34c4 lma ffffffff8801c180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f648
=> Loading section .data, size 0x65c lma ffffffff8801f660
=> Start address ffffffff88000004
=> Transfer rate: 1041792 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[163/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx06.exe
Result: invalid
Time: 0:00:00.270523 psx06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17f00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88017f00
=> Loading section .init, size 0x48 lma ffffffff88017f80
=> Loading section .fini, size 0x30 lma ffffffff88017fc8
=> Loading section .ctors, size 0x8 lma ffffffff88017ff8
=> Loading section .dtors, size 0x8 lma ffffffff88018000
=> Loading section .rdata, size 0x23e4 lma ffffffff88018010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a3f8
=> Loading section .data, size 0x6c4 lma ffffffff8801a410
=> Start address ffffffff88000004
=> Transfer rate: 874048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[164/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx07.exe
Result: invalid
Time: 0:00:00.263960 psx07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1c3f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801c3f0
=> Loading section .init, size 0x48 lma ffffffff8801c460
=> Loading section .fini, size 0x30 lma ffffffff8801c4a8
=> Loading section .ctors, size 0x8 lma ffffffff8801c4d8
=> Loading section .dtors, size 0x8 lma ffffffff8801c4e0
=> Loading section .rdata, size 0x4acc lma ffffffff8801c4f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020fc0
=> Loading section .data, size 0x65c lma ffffffff88020fd8
=> Start address ffffffff88000004
=> Transfer rate: 1093952 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[165/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx08.exe
Result: invalid
Time: 0:00:00.273880 psx08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x178e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880178e0
=> Loading section .init, size 0x48 lma ffffffff88017950
=> Loading section .fini, size 0x30 lma ffffffff88017998
=> Loading section .ctors, size 0x8 lma ffffffff880179c8
=> Loading section .dtors, size 0x8 lma ffffffff880179d0
=> Loading section .rdata, size 0x246c lma ffffffff880179e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019e50
=> Loading section .data, size 0x65c lma ffffffff88019e68
=> Start address ffffffff88000004
=> Transfer rate: 861632 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[166/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx09.exe
Result: invalid
Time: 0:00:00.272227 psx09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x203d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880203d0
=> Loading section .init, size 0x48 lma ffffffff88020440
=> Loading section .fini, size 0x30 lma ffffffff88020488
=> Loading section .ctors, size 0x8 lma ffffffff880204b8
=> Loading section .dtors, size 0x8 lma ffffffff880204c0
=> Loading section .rdata, size 0x32a8 lma ffffffff880204d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023778
=> Loading section .data, size 0x650 lma ffffffff88023790
=> Start address ffffffff88000004
=> Transfer rate: 1175232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[167/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx10.exe
Result: invalid
Time: 0:00:00.272135 psx10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014130
=> Loading section .init, size 0x48 lma ffffffff880141a0
=> Loading section .fini, size 0x30 lma ffffffff880141e8
=> Loading section .ctors, size 0x8 lma ffffffff88014218
=> Loading section .dtors, size 0x8 lma ffffffff88014220
=> Loading section .rdata, size 0x2458 lma ffffffff88014230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016688
=> Loading section .data, size 0x46c lma ffffffff880166a0
=> Start address ffffffff88000004
=> Transfer rate: 743456 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[168/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:160 W:0 | mipstx39/jmr3904: psx11.exe
Result: invalid
Time: 0:00:00.261549 psx11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x176a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880176a0
=> Loading section .init, size 0x48 lma ffffffff88017710
=> Loading section .fini, size 0x30 lma ffffffff88017758
=> Loading section .ctors, size 0x8 lma ffffffff88017788
=> Loading section .dtors, size 0x8 lma ffffffff88017790
=> Loading section .rdata, size 0x22b8 lma ffffffff880177a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019a58
=> Loading section .data, size 0x650 lma ffffffff88019a70
=> Start address ffffffff88000004
=> Transfer rate: 853440 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[169/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psx12.exe
Result: invalid
Time: 0:00:00.274429 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17d30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017d30
=> Loading section .init, size 0x48 lma ffffffff88017da0
=> Loading section .fini, size 0x30 lma ffffffff88017de8
=> Loading section .ctors, size 0x8 lma ffffffff88017e18
=> Loading section .dtors, size 0x8 lma ffffffff88017e20
=> Loading section .rdata, size 0x22d4 lma ffffffff88017e30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a108
=> Loading section .data, size 0x65c lma ffffffff8801a120
=> Start address ffffffff88000004
=> Transfer rate: 867200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[170/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psx13.exe
Result: invalid
Time: 0:00:00.276487 psx13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17fd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017fd0
=> Loading section .init, size 0x48 lma ffffffff88018040
=> Loading section .fini, size 0x30 lma ffffffff88018088
=> Loading section .ctors, size 0x8 lma ffffffff880180b8
=> Loading section .dtors, size 0x8 lma ffffffff880180c0
=> Loading section .rdata, size 0x1c80 lma ffffffff880180d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019d50
=> Loading section .data, size 0x458 lma ffffffff88019d68
=> Start address ffffffff88000004
=> Transfer rate: 855488 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[171/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psx14.exe
Result: invalid
Time: 0:00:00.260279 psx14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x117f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880117f0
=> Loading section .init, size 0x48 lma ffffffff88011860
=> Loading section .fini, size 0x30 lma ffffffff880118a8
=> Loading section .ctors, size 0x8 lma ffffffff880118d8
=> Loading section .dtors, size 0x8 lma ffffffff880118e0
=> Loading section .rdata, size 0x2199 lma ffffffff880118f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a90
=> Loading section .data, size 0x460 lma ffffffff88013aa8
=> Start address ffffffff88000004
=> Transfer rate: 653256 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[172/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psx15.exe
Result: invalid
Time: 0:00:00.271239 psx15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10890 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010890
=> Loading section .init, size 0x48 lma ffffffff88010900
=> Loading section .fini, size 0x30 lma ffffffff88010948
=> Loading section .ctors, size 0x8 lma ffffffff88010978
=> Loading section .dtors, size 0x8 lma ffffffff88010980
=> Loading section .rdata, size 0x1a25 lma ffffffff88010990
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123b8
=> Loading section .data, size 0x458 lma ffffffff880123d0
=> Start address ffffffff88000004
=> Transfer rate: 606440 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[173/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psx16.exe
Result: invalid
Time: 0:00:00.267358 psx16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11e60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011e60
=> Loading section .init, size 0x48 lma ffffffff88011ed0
=> Loading section .fini, size 0x30 lma ffffffff88011f18
=> Loading section .ctors, size 0x8 lma ffffffff88011f48
=> Loading section .dtors, size 0x8 lma ffffffff88011f50
=> Loading section .rdata, size 0x1b38 lma ffffffff88011f60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a98
=> Loading section .data, size 0x46c lma ffffffff88013ab0
=> Start address ffffffff88000004
=> Transfer rate: 653472 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[174/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psxaio01.exe
Result: invalid
Time: 0:00:00.264522 psxaio01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x150b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880150b0
=> Loading section .init, size 0x48 lma ffffffff88015120
=> Loading section .fini, size 0x30 lma ffffffff88015168
=> Loading section .ctors, size 0x8 lma ffffffff88015198
=> Loading section .dtors, size 0x8 lma ffffffff880151a0
=> Loading section .rdata, size 0x1cc1 lma ffffffff880151b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016e78
=> Loading section .data, size 0x458 lma ffffffff88016e90
=> Start address ffffffff88000004
=> Transfer rate: 759496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[175/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psxaio02.exe
Result: invalid
Time: 0:00:00.272473 psxaio02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1b030 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801b030
=> Loading section .init, size 0x48 lma ffffffff8801b0a0
=> Loading section .fini, size 0x30 lma ffffffff8801b0e8
=> Loading section .ctors, size 0x8 lma ffffffff8801b118
=> Loading section .dtors, size 0x8 lma ffffffff8801b120
=> Loading section .rdata, size 0x2528 lma ffffffff8801b130
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d658
=> Loading section .data, size 0x5c4 lma ffffffff8801d670
=> Start address ffffffff88000004
=> Transfer rate: 975200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[176/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:168 W:0 | mipstx39/jmr3904: psxaio03.exe
Result: invalid
Time: 0:00:00.270128 psxaio03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ad20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801ad20
=> Loading section .init, size 0x48 lma ffffffff8801ad90
=> Loading section .fini, size 0x30 lma ffffffff8801add8
=> Loading section .ctors, size 0x8 lma ffffffff8801ae08
=> Loading section .dtors, size 0x8 lma ffffffff8801ae10
=> Loading section .rdata, size 0x22ec lma ffffffff8801ae20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d110
=> Loading section .data, size 0x5d0 lma ffffffff8801d128
=> Start address ffffffff88000004
=> Transfer rate: 964448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[177/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxalarm01.exe
Result: invalid
Time: 0:00:00.261028 psxalarm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13250 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013250
=> Loading section .init, size 0x48 lma ffffffff880132d0
=> Loading section .fini, size 0x30 lma ffffffff88013318
=> Loading section .ctors, size 0x8 lma ffffffff88013348
=> Loading section .dtors, size 0x8 lma ffffffff88013350
=> Loading section .rdata, size 0x1d04 lma ffffffff88013360
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015068
=> Loading section .data, size 0x49c lma ffffffff88015080
=> Start address ffffffff88000004
=> Transfer rate: 698496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[178/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid
Time: 0:00:00.267294 psxautoinit01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011700
=> Loading section .init, size 0x48 lma ffffffff88011770
=> Loading section .fini, size 0x30 lma ffffffff880117b8
=> Loading section .ctors, size 0x8 lma ffffffff880117e8
=> Loading section .dtors, size 0x8 lma ffffffff880117f0
=> Loading section .rdata, size 0x25a8 lma ffffffff88011800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013da8
=> Loading section .data, size 0x450 lma ffffffff88013dc0
=> Start address ffffffff88000004
=> Transfer rate: 659520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[179/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid
Time: 0:00:00.272102 psxautoinit02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12fd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012fd0
=> Loading section .init, size 0x48 lma ffffffff88013040
=> Loading section .fini, size 0x30 lma ffffffff88013088
=> Loading section .ctors, size 0x8 lma ffffffff880130b8
=> Loading section .dtors, size 0x8 lma ffffffff880130c0
=> Loading section .rdata, size 0x26d0 lma ffffffff880130d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157a0
=> Loading section .data, size 0x460 lma ffffffff880157b8
=> Start address ffffffff88000004
=> Transfer rate: 712832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[180/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid
Time: 0:00:00.267715 psxbarrier01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12d70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012d70
=> Loading section .init, size 0x48 lma ffffffff88012df0
=> Loading section .fini, size 0x30 lma ffffffff88012e38
=> Loading section .ctors, size 0x8 lma ffffffff88012e68
=> Loading section .dtors, size 0x8 lma ffffffff88012e70
=> Loading section .rdata, size 0x21a4 lma ffffffff88012e80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015028
=> Loading section .data, size 0x4dc lma ffffffff88015040
=> Start address ffffffff88000004
=> Transfer rate: 698496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[181/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxcancel.exe
Result: invalid
Time: 0:00:00.271301 psxcancel.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x155f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880155f0
=> Loading section .init, size 0x48 lma ffffffff88015670
=> Loading section .fini, size 0x30 lma ffffffff880156b8
=> Loading section .ctors, size 0x8 lma ffffffff880156e8
=> Loading section .dtors, size 0x8 lma ffffffff880156f0
=> Loading section .rdata, size 0x28f8 lma ffffffff88015700
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017ff8
=> Loading section .data, size 0x4d4 lma ffffffff88018010
=> Start address ffffffff88000004
=> Transfer rate: 796384 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[182/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxcancel01.exe
Result: invalid
Time: 0:00:00.269103 psxcancel01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12320 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012320
=> Loading section .init, size 0x48 lma ffffffff880123a0
=> Loading section .fini, size 0x30 lma ffffffff880123e8
=> Loading section .ctors, size 0x8 lma ffffffff88012418
=> Loading section .dtors, size 0x8 lma ffffffff88012420
=> Loading section .rdata, size 0x248c lma ffffffff88012430
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880148c0
=> Loading section .data, size 0x490 lma ffffffff880148d8
=> Start address ffffffff88000004
=> Transfer rate: 682720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[183/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxchroot01.exe
Result: invalid
Time: 0:00:00.273979 psxchroot01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010360
=> Loading section .init, size 0x48 lma ffffffff880103d0
=> Loading section .fini, size 0x30 lma ffffffff88010418
=> Loading section .ctors, size 0x8 lma ffffffff88010448
=> Loading section .dtors, size 0x8 lma ffffffff88010450
=> Loading section .rdata, size 0x1b85 lma ffffffff88010460
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fe8
=> Loading section .data, size 0x488 lma ffffffff88012000
=> Start address ffffffff88000004
=> Transfer rate: 599016 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[184/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:176 W:0 | mipstx39/jmr3904: psxclassic01.exe
Result: invalid
Time: 0:00:00.268493 psxclassic01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13e00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013e00
=> Loading section .init, size 0x48 lma ffffffff88013e80
=> Loading section .fini, size 0x30 lma ffffffff88013ec8
=> Loading section .ctors, size 0x8 lma ffffffff88013ef8
=> Loading section .dtors, size 0x8 lma ffffffff88013f00
=> Loading section .rdata, size 0x1e88 lma ffffffff88013f10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015d98
=> Loading section .data, size 0x4ec lma ffffffff88015db0
=> Start address ffffffff88000004
=> Transfer rate: 726176 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[185/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxcleanup.exe
Result: invalid
Time: 0:00:00.274922 psxcleanup.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x149a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880149a0
=> Loading section .init, size 0x48 lma ffffffff88014a20
=> Loading section .fini, size 0x30 lma ffffffff88014a68
=> Loading section .ctors, size 0x8 lma ffffffff88014a98
=> Loading section .dtors, size 0x8 lma ffffffff88014aa0
=> Loading section .rdata, size 0x26a4 lma ffffffff88014ab0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017158
=> Loading section .data, size 0x4a4 lma ffffffff88017170
=> Start address ffffffff88000004
=> Transfer rate: 766016 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[186/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid
Time: 0:00:00.267010 psxcleanup01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x119a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880119a0
=> Loading section .init, size 0x48 lma ffffffff88011a20
=> Loading section .fini, size 0x30 lma ffffffff88011a68
=> Loading section .ctors, size 0x8 lma ffffffff88011a98
=> Loading section .dtors, size 0x8 lma ffffffff88011aa0
=> Loading section .rdata, size 0x1b4d lma ffffffff88011ab0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013600
=> Loading section .data, size 0x4f0 lma ffffffff88013618
=> Start address ffffffff88000004
=> Transfer rate: 645096 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[187/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid
Time: 0:00:00.267603 psxcleanup02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010fa0
=> Loading section .init, size 0x48 lma ffffffff88011020
=> Loading section .fini, size 0x30 lma ffffffff88011068
=> Loading section .ctors, size 0x8 lma ffffffff88011098
=> Loading section .dtors, size 0x8 lma ffffffff880110a0
=> Loading section .rdata, size 0x1aed lma ffffffff880110b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ba0
=> Loading section .data, size 0x4f0 lma ffffffff88012bb8
=> Start address ffffffff88000004
=> Transfer rate: 623848 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[188/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxclock.exe
Result: invalid
Time: 0:00:00.260022 psxclock.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19c20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019c20
=> Loading section .init, size 0x48 lma ffffffff88019c90
=> Loading section .fini, size 0x30 lma ffffffff88019cd8
=> Loading section .ctors, size 0x8 lma ffffffff88019d08
=> Loading section .dtors, size 0x8 lma ffffffff88019d10
=> Loading section .rdata, size 0x283c lma ffffffff88019d20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c560
=> Loading section .data, size 0x660 lma ffffffff8801c578
=> Start address ffffffff88000004
=> Transfer rate: 941664 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[189/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxclock01.exe
Result: invalid
Time: 0:00:00.261350 psxclock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11260 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011260
=> Loading section .init, size 0x48 lma ffffffff880112d0
=> Loading section .fini, size 0x30 lma ffffffff88011318
=> Loading section .ctors, size 0x8 lma ffffffff88011348
=> Loading section .dtors, size 0x8 lma ffffffff88011350
=> Loading section .rdata, size 0x1a2d lma ffffffff88011360
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d90
=> Loading section .data, size 0x458 lma ffffffff88012da8
=> Start address ffffffff88000004
=> Transfer rate: 626600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[190/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid
Time: 0:00:00.270168 psxclockrealtime01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17180 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88017180
=> Loading section .init, size 0x48 lma ffffffff88017200
=> Loading section .fini, size 0x30 lma ffffffff88017248
=> Loading section .ctors, size 0x8 lma ffffffff88017278
=> Loading section .dtors, size 0x8 lma ffffffff88017280
=> Loading section .rdata, size 0x26bc lma ffffffff88017290
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019950
=> Loading section .data, size 0x4c0 lma ffffffff88019968
=> Start address ffffffff88000004
=> Transfer rate: 848096 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[191/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid
Time: 0:00:00.263526 psxconcurrency01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10500 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010500
=> Loading section .init, size 0x48 lma ffffffff88010570
=> Loading section .fini, size 0x30 lma ffffffff880105b8
=> Loading section .ctors, size 0x8 lma ffffffff880105e8
=> Loading section .dtors, size 0x8 lma ffffffff880105f0
=> Loading section .rdata, size 0x1b01 lma ffffffff88010600
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012108
=> Loading section .data, size 0x448 lma ffffffff88012120
=> Start address ffffffff88000004
=> Transfer rate: 600776 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[192/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:184 W:0 | mipstx39/jmr3904: psxcond01.exe
Result: invalid
Time: 0:00:00.272617 psxcond01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13620 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013620
=> Loading section .init, size 0x48 lma ffffffff88013690
=> Loading section .fini, size 0x30 lma ffffffff880136d8
=> Loading section .ctors, size 0x8 lma ffffffff88013708
=> Loading section .dtors, size 0x8 lma ffffffff88013710
=> Loading section .rdata, size 0x271c lma ffffffff88013720
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015e40
=> Loading section .data, size 0x46c lma ffffffff88015e58
=> Start address ffffffff88000004
=> Transfer rate: 726464 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[193/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxcond02.exe
Result: invalid
Time: 0:00:00.269045 psxcond02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f10
=> Loading section .init, size 0x48 lma ffffffff88010f80
=> Loading section .fini, size 0x30 lma ffffffff88010fc8
=> Loading section .ctors, size 0x8 lma ffffffff88010ff8
=> Loading section .dtors, size 0x8 lma ffffffff88011000
=> Loading section .rdata, size 0x2678 lma ffffffff88011010
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013688
=> Loading section .data, size 0x450 lma ffffffff880136a0
=> Start address ffffffff88000004
=> Transfer rate: 644928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[194/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxconfig01.exe
Result: invalid
Time: 0:00:00.276418 psxconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x158e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb0 lma ffffffff880158e0
=> Loading section .init, size 0x48 lma ffffffff88015990
=> Loading section .fini, size 0x30 lma ffffffff880159d8
=> Loading section .ctors, size 0x8 lma ffffffff88015a08
=> Loading section .dtors, size 0x8 lma ffffffff88015a10
=> Loading section .rdata, size 0x277c lma ffffffff88015a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880181a0
=> Loading section .data, size 0x748 lma ffffffff880181b8
=> Start address ffffffff88000004
=> Transfer rate: 804768 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[195/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxconfstr.exe
Result: invalid
Time: 0:00:00.253427 psxconfstr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18f40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018f40
=> Loading section .init, size 0x48 lma ffffffff88018fc0
=> Loading section .fini, size 0x30 lma ffffffff88019008
=> Loading section .ctors, size 0x8 lma ffffffff88019038
=> Loading section .dtors, size 0x8 lma ffffffff88019040
=> Loading section .rdata, size 0x2418 lma ffffffff88019050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b468
=> Loading section .data, size 0x488 lma ffffffff8801b480
=> Start address ffffffff88000004
=> Transfer rate: 903168 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[196/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid
Time: 0:00:00.271451 psxdevctl01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13d50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013d50
=> Loading section .init, size 0x48 lma ffffffff88013dc0
=> Loading section .fini, size 0x30 lma ffffffff88013e08
=> Loading section .ctors, size 0x8 lma ffffffff88013e38
=> Loading section .dtors, size 0x8 lma ffffffff88013e40
=> Loading section .rdata, size 0x1dd8 lma ffffffff88013e50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015c28
=> Loading section .data, size 0x448 lma ffffffff88015c40
=> Start address ffffffff88000004
=> Transfer rate: 721920 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[197/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid
Time: 0:00:00.255428 psxeintr_join.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x126d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880126d0
=> Loading section .init, size 0x48 lma ffffffff88012750
=> Loading section .fini, size 0x30 lma ffffffff88012798
=> Loading section .ctors, size 0x8 lma ffffffff880127c8
=> Loading section .dtors, size 0x8 lma ffffffff880127d0
=> Loading section .rdata, size 0x1ca8 lma ffffffff880127e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014488
=> Loading section .data, size 0x460 lma ffffffff880144a0
=> Start address ffffffff88000004
=> Transfer rate: 673728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[198/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxenosys.exe
Result: invalid
Time: 0:00:00.265169 psxenosys.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012210
=> Loading section .init, size 0x48 lma ffffffff88012280
=> Loading section .fini, size 0x30 lma ffffffff880122c8
=> Loading section .ctors, size 0x8 lma ffffffff880122f8
=> Loading section .dtors, size 0x8 lma ffffffff88012300
=> Loading section .rdata, size 0x26c0 lma ffffffff88012310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880149d0
=> Loading section .data, size 0x464 lma ffffffff880149e8
=> Start address ffffffff88000004
=> Transfer rate: 684576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[199/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxfatal01.exe
Result: invalid
Time: 0:00:00.273384 psxfatal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11600 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011600
=> Loading section .init, size 0x48 lma ffffffff88011670
=> Loading section .fini, size 0x30 lma ffffffff880116b8
=> Loading section .ctors, size 0x8 lma ffffffff880116e8
=> Loading section .dtors, size 0x8 lma ffffffff880116f0
=> Loading section .rdata, size 0x2788 lma ffffffff88011700
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e88
=> Loading section .data, size 0x458 lma ffffffff88013ea0
=> Start address ffffffff88000004
=> Transfer rate: 661376 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[200/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:192 W:0 | mipstx39/jmr3904: psxfatal02.exe
Result: invalid
Time: 0:00:00.268955 psxfatal02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11560 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011560
=> Loading section .init, size 0x48 lma ffffffff880115d0
=> Loading section .fini, size 0x30 lma ffffffff88011618
=> Loading section .ctors, size 0x8 lma ffffffff88011648
=> Loading section .dtors, size 0x8 lma ffffffff88011650
=> Loading section .rdata, size 0x279c lma ffffffff88011660
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e00
=> Loading section .data, size 0x458 lma ffffffff88013e18
=> Start address ffffffff88000004
=> Transfer rate: 660256 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[201/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxfchx01.exe
Result: invalid
Time: 0:00:00.271468 psxfchx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011840
=> Loading section .init, size 0x48 lma ffffffff880118b0
=> Loading section .fini, size 0x30 lma ffffffff880118f8
=> Loading section .ctors, size 0x8 lma ffffffff88011928
=> Loading section .dtors, size 0x8 lma ffffffff88011930
=> Loading section .rdata, size 0x1fb1 lma ffffffff88011940
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138f8
=> Loading section .data, size 0x458 lma ffffffff88013910
=> Start address ffffffff88000004
=> Transfer rate: 649928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[202/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxfenv01.exe
Result: invalid
Time: 0:00:00.266775 psxfenv01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13350 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013350
=> Loading section .init, size 0x48 lma ffffffff880133c0
=> Loading section .fini, size 0x30 lma ffffffff88013408
=> Loading section .ctors, size 0x8 lma ffffffff88013438
=> Loading section .dtors, size 0x8 lma ffffffff88013440
=> Loading section .rdata, size 0x1cc8 lma ffffffff88013450
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015118
=> Loading section .data, size 0x450 lma ffffffff88015130
=> Start address ffffffff88000004
=> Transfer rate: 699328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[203/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxfile01.exe
Result: invalid
Time: 0:00:00.270559 psxfile01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x24440 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88024440
=> Loading section .init, size 0x48 lma ffffffff880244b0
=> Loading section .fini, size 0x30 lma ffffffff880244f8
=> Loading section .ctors, size 0x8 lma ffffffff88024528
=> Loading section .dtors, size 0x8 lma ffffffff88024530
=> Loading section .rdata, size 0x4490 lma ffffffff88024540
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880289d0
=> Loading section .data, size 0x650 lma ffffffff880289e8
=> Start address ffffffff88000004
=> Transfer rate: 1343872 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[204/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxfile02.exe
Result: invalid
Time: 0:00:00.273930 psxfile02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012160
=> Loading section .init, size 0x48 lma ffffffff880121d0
=> Loading section .fini, size 0x30 lma ffffffff88012218
=> Loading section .ctors, size 0x8 lma ffffffff88012248
=> Loading section .dtors, size 0x8 lma ffffffff88012250
=> Loading section .rdata, size 0x24d0 lma ffffffff88012260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014730
=> Loading section .data, size 0x458 lma ffffffff88014748
=> Start address ffffffff88000004
=> Transfer rate: 679104 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[205/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid
Time: 0:00:00.256117 psxfilelock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12720 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012720
=> Loading section .init, size 0x48 lma ffffffff88012790
=> Loading section .fini, size 0x30 lma ffffffff880127d8
=> Loading section .ctors, size 0x8 lma ffffffff88012808
=> Loading section .dtors, size 0x8 lma ffffffff88012810
=> Loading section .rdata, size 0x1a6c lma ffffffff88012820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014290
=> Loading section .data, size 0x458 lma ffffffff880142a8
=> Start address ffffffff88000004
=> Transfer rate: 669600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[206/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxftw01.exe
Result: invalid
Time: 0:00:00.270248 psxftw01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1bdc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801bdc0
=> Loading section .init, size 0x48 lma ffffffff8801be40
=> Loading section .fini, size 0x30 lma ffffffff8801be88
=> Loading section .ctors, size 0x8 lma ffffffff8801beb8
=> Loading section .dtors, size 0x8 lma ffffffff8801bec0
=> Loading section .rdata, size 0x4314 lma ffffffff8801bed0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880201e8
=> Loading section .data, size 0x4f8 lma ffffffff88020200
=> Start address ffffffff88000004
=> Transfer rate: 1062752 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[207/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid
Time: 0:00:00.261850 psxgetattrnp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12660 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012660
=> Loading section .init, size 0x48 lma ffffffff880126d0
=> Loading section .fini, size 0x30 lma ffffffff88012718
=> Loading section .ctors, size 0x8 lma ffffffff88012748
=> Loading section .dtors, size 0x8 lma ffffffff88012750
=> Loading section .rdata, size 0x1f88 lma ffffffff88012760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880146e8
=> Loading section .data, size 0x450 lma ffffffff88014700
=> Start address ffffffff88000004
=> Transfer rate: 678464 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[208/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:200 W:0 | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid
Time: 0:00:00.273380 psxgetrusage01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10950 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=> Loading section .init, size 0x48 lma ffffffff880109c0
=> Loading section .fini, size 0x30 lma ffffffff88010a08
=> Loading section .ctors, size 0x8 lma ffffffff88010a38
=> Loading section .dtors, size 0x8 lma ffffffff88010a40
=> Loading section .rdata, size 0x1ba5 lma ffffffff88010a50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125f8
=> Loading section .data, size 0x458 lma ffffffff88012610
=> Start address ffffffff88000004
=> Transfer rate: 611048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[209/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid
Time: 0:00:00.268424 psxglobalcon01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10440 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010440
=> Loading section .init, size 0x48 lma ffffffff880104b0
=> Loading section .fini, size 0x30 lma ffffffff880104f8
=> Loading section .ctors, size 0xc lma ffffffff88010528
=> Loading section .dtors, size 0x8 lma ffffffff88010534
=> Loading section .rdata, size 0x1a5d lma ffffffff88010540
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fa0
=> Loading section .data, size 0x448 lma ffffffff88011fb8
=> Start address ffffffff88000004
=> Transfer rate: 597960 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[210/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid
Time: 0:00:00.270406 psxglobalcon02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010960
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0xc lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a64
=> Loading section .rdata, size 0x1a85 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124f8
=> Loading section .data, size 0x4b8 lma ffffffff88012510
=> Start address ffffffff88000004
=> Transfer rate: 609800 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[211/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psxid01.exe
Result: invalid
Time: 0:00:00.276595 psxid01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13e50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013e50
=> Loading section .init, size 0x48 lma ffffffff88013ec0
=> Loading section .fini, size 0x30 lma ffffffff88013f08
=> Loading section .ctors, size 0x8 lma ffffffff88013f38
=> Loading section .dtors, size 0x8 lma ffffffff88013f40
=> Loading section .rdata, size 0x1d68 lma ffffffff88013f50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015cb8
=> Loading section .data, size 0x480 lma ffffffff88015cd0
=> Start address ffffffff88000004
=> Transfer rate: 723520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[212/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psximfs01.exe
Result: invalid
Time: 0:00:00.270704 psximfs01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11710 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011710
=> Loading section .init, size 0x48 lma ffffffff88011780
=> Loading section .fini, size 0x30 lma ffffffff880117c8
=> Loading section .ctors, size 0x8 lma ffffffff880117f8
=> Loading section .dtors, size 0x8 lma ffffffff88011800
=> Loading section .rdata, size 0x2534 lma ffffffff88011810
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d48
=> Loading section .data, size 0x458 lma ffffffff88013d60
=> Start address ffffffff88000004
=> Transfer rate: 658784 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[213/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psximfs02.exe
Result: invalid
Time: 0:00:00.260746 psximfs02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19980 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88019980
=> Loading section .init, size 0x48 lma ffffffff88019a00
=> Loading section .fini, size 0x30 lma ffffffff88019a48
=> Loading section .ctors, size 0x8 lma ffffffff88019a78
=> Loading section .dtors, size 0x8 lma ffffffff88019a80
=> Loading section .rdata, size 0x28b0 lma ffffffff88019a90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c340
=> Loading section .data, size 0x5ec lma ffffffff8801c358
=> Start address ffffffff88000004
=> Transfer rate: 936416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[214/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid
Time: 0:00:00.284980 psxinttypes01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14a30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014a30
=> Loading section .init, size 0x48 lma ffffffff88014aa0
=> Loading section .fini, size 0x30 lma ffffffff88014ae8
=> Loading section .ctors, size 0x8 lma ffffffff88014b18
=> Loading section .dtors, size 0x8 lma ffffffff88014b20
=> Loading section .rdata, size 0x2148 lma ffffffff88014b30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c78
=> Loading section .data, size 0x5b8 lma ffffffff88016c90
=> Start address ffffffff88000004
=> Transfer rate: 758272 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[215/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psxitimer.exe
Result: invalid
Time: 0:00:00.273959 psxitimer.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880114b0
=> Loading section .init, size 0x48 lma ffffffff88011520
=> Loading section .fini, size 0x30 lma ffffffff88011568
=> Loading section .ctors, size 0x8 lma ffffffff88011598
=> Loading section .dtors, size 0x8 lma ffffffff880115a0
=> Loading section .rdata, size 0x1c2d lma ffffffff880115b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131e0
=> Loading section .data, size 0x458 lma ffffffff880131f8
=> Start address ffffffff88000004
=> Transfer rate: 635432 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[216/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:208 W:0 | mipstx39/jmr3904: psxkey01.exe
Result: invalid
Time: 0:00:00.274206 psxkey01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe50
=> Loading section .init, size 0x48 lma ffffffff8800fec0
=> Loading section .fini, size 0x30 lma ffffffff8800ff08
=> Loading section .ctors, size 0x8 lma ffffffff8800ff38
=> Loading section .dtors, size 0x8 lma ffffffff8800ff40
=> Loading section .rdata, size 0x1d11 lma ffffffff8800ff50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c68
=> Loading section .data, size 0x4b8 lma ffffffff88011c80
=> Start address ffffffff88000004
=> Transfer rate: 592200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[217/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey02.exe
Result: invalid
Time: 0:00:00.272180 psxkey02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a40
=> Loading section .init, size 0x48 lma ffffffff88010ab0
=> Loading section .fini, size 0x30 lma ffffffff88010af8
=> Loading section .ctors, size 0x8 lma ffffffff88010b28
=> Loading section .dtors, size 0x8 lma ffffffff88010b30
=> Loading section .rdata, size 0x1b29 lma ffffffff88010b40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012670
=> Loading section .data, size 0x4b8 lma ffffffff88012688
=> Start address ffffffff88000004
=> Transfer rate: 612744 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[218/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey03.exe
Result: invalid
Time: 0:00:00.267283 psxkey03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11a80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011a80
=> Loading section .init, size 0x48 lma ffffffff88011b00
=> Loading section .fini, size 0x30 lma ffffffff88011b48
=> Loading section .ctors, size 0x8 lma ffffffff88011b78
=> Loading section .dtors, size 0x8 lma ffffffff88011b80
=> Loading section .rdata, size 0x1bb1 lma ffffffff88011b90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013748
=> Loading section .data, size 0x4d0 lma ffffffff88013760
=> Start address ffffffff88000004
=> Transfer rate: 647432 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[219/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey04.exe
Result: invalid
Time: 0:00:00.273258 psxkey04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011b30
=> Loading section .init, size 0x48 lma ffffffff88011bb0
=> Loading section .fini, size 0x30 lma ffffffff88011bf8
=> Loading section .ctors, size 0x8 lma ffffffff88011c28
=> Loading section .dtors, size 0x8 lma ffffffff88011c30
=> Loading section .rdata, size 0x1bb1 lma ffffffff88011c40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137f8
=> Loading section .data, size 0x4d8 lma ffffffff88013810
=> Start address ffffffff88000004
=> Transfer rate: 648904 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[220/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey05.exe
Result: invalid
Time: 0:00:00.262078 psxkey05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10300 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010300
=> Loading section .init, size 0x48 lma ffffffff88010370
=> Loading section .fini, size 0x30 lma ffffffff880103b8
=> Loading section .ctors, size 0x8 lma ffffffff880103e8
=> Loading section .dtors, size 0x8 lma ffffffff880103f0
=> Loading section .rdata, size 0x1b35 lma ffffffff88010400
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f38
=> Loading section .data, size 0x4b8 lma ffffffff88011f50
=> Start address ffffffff88000004
=> Transfer rate: 597992 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[221/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey06.exe
Result: invalid
Time: 0:00:00.270832 psxkey06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12730 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012730
=> Loading section .init, size 0x48 lma ffffffff880127b0
=> Loading section .fini, size 0x30 lma ffffffff880127f8
=> Loading section .ctors, size 0x8 lma ffffffff88012828
=> Loading section .dtors, size 0x8 lma ffffffff88012830
=> Loading section .rdata, size 0x1e61 lma ffffffff88012840
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880146a8
=> Loading section .data, size 0x4e0 lma ffffffff880146c0
=> Start address ffffffff88000004
=> Transfer rate: 679048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[222/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey07.exe
Result: invalid
Time: 0:00:00.273177 psxkey07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x137f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880137f0
=> Loading section .init, size 0x48 lma ffffffff88013870
=> Loading section .fini, size 0x30 lma ffffffff880138b8
=> Loading section .ctors, size 0x8 lma ffffffff880138e8
=> Loading section .dtors, size 0x8 lma ffffffff880138f0
=> Loading section .rdata, size 0x1d28 lma ffffffff88013900
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015628
=> Loading section .data, size 0x4d0 lma ffffffff88015640
=> Start address ffffffff88000004
=> Transfer rate: 710720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[223/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey08.exe
Result: invalid
Time: 0:00:00.276948 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880120a0
=> Loading section .init, size 0x48 lma ffffffff88012120
=> Loading section .fini, size 0x30 lma ffffffff88012168
=> Loading section .ctors, size 0x8 lma ffffffff88012198
=> Loading section .dtors, size 0x8 lma ffffffff880121a0
=> Loading section .rdata, size 0x1ce8 lma ffffffff880121b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e98
=> Loading section .data, size 0x4e8 lma ffffffff88013eb0
=> Start address ffffffff88000004
=> Transfer rate: 662656 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[224/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:216 W:0 | mipstx39/jmr3904: psxkey09.exe
Result: invalid
Time: 0:00:00.254626 psxkey09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011960
=> Loading section .init, size 0x48 lma ffffffff880119e0
=> Loading section .fini, size 0x30 lma ffffffff88011a28
=> Loading section .ctors, size 0x8 lma ffffffff88011a58
=> Loading section .dtors, size 0x8 lma ffffffff88011a60
=> Loading section .rdata, size 0x1b59 lma ffffffff88011a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135d0
=> Loading section .data, size 0x4d0 lma ffffffff880135e8
=> Start address ffffffff88000004
=> Transfer rate: 644424 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[225/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxkey10.exe
Result: invalid
Time: 0:00:00.276720 psxkey10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011960
=> Loading section .init, size 0x48 lma ffffffff880119e0
=> Loading section .fini, size 0x30 lma ffffffff88011a28
=> Loading section .ctors, size 0x8 lma ffffffff88011a58
=> Loading section .dtors, size 0x8 lma ffffffff88011a60
=> Loading section .rdata, size 0x1b69 lma ffffffff88011a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135e0
=> Loading section .data, size 0x4d0 lma ffffffff880135f8
=> Start address ffffffff88000004
=> Transfer rate: 644552 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[226/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmmap01.exe
Result: invalid
Time: 0:00:00.272102 psxmmap01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1b070 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801b070
=> Loading section .init, size 0x48 lma ffffffff8801b0f0
=> Loading section .fini, size 0x30 lma ffffffff8801b138
=> Loading section .ctors, size 0x8 lma ffffffff8801b168
=> Loading section .dtors, size 0x8 lma ffffffff8801b170
=> Loading section .rdata, size 0x2608 lma ffffffff8801b180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d788
=> Loading section .data, size 0x634 lma ffffffff8801d7a0
=> Start address ffffffff88000004
=> Transfer rate: 978528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[227/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmount.exe
Result: invalid
Time: 0:00:00.258677 psxmount.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012e80
=> Loading section .init, size 0x48 lma ffffffff88012ef0
=> Loading section .fini, size 0x30 lma ffffffff88012f38
=> Loading section .ctors, size 0x8 lma ffffffff88012f68
=> Loading section .dtors, size 0x8 lma ffffffff88012f70
=> Loading section .rdata, size 0x2ce0 lma ffffffff88012f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015c60
=> Loading section .data, size 0x518 lma ffffffff88015c78
=> Start address ffffffff88000004
=> Transfer rate: 724032 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[228/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid
Time: 0:00:00.271306 psxmsgq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x26eb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88026eb0
=> Loading section .init, size 0x48 lma ffffffff88026f30
=> Loading section .fini, size 0x30 lma ffffffff88026f78
=> Loading section .ctors, size 0x8 lma ffffffff88026fa8
=> Loading section .dtors, size 0x8 lma ffffffff88026fb0
=> Loading section .rdata, size 0x4780 lma ffffffff88026fc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b740
=> Loading section .data, size 0x898 lma ffffffff8802b758
=> Start address ffffffff88000004
=> Transfer rate: 1441600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[229/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid
Time: 0:00:00.274617 psxmsgq02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x175f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880175f0
=> Loading section .init, size 0x48 lma ffffffff88017670
=> Loading section .fini, size 0x30 lma ffffffff880176b8
=> Loading section .ctors, size 0x8 lma ffffffff880176e8
=> Loading section .dtors, size 0x8 lma ffffffff880176f0
=> Loading section .rdata, size 0x2b74 lma ffffffff88017700
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a278
=> Loading section .data, size 0x680 lma ffffffff8801a290
=> Start address ffffffff88000004
=> Transfer rate: 870432 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[230/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid
Time: 0:00:00.273732 psxmsgq03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x144f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880144f0
=> Loading section .init, size 0x48 lma ffffffff88014570
=> Loading section .fini, size 0x30 lma ffffffff880145b8
=> Loading section .ctors, size 0x8 lma ffffffff880145e8
=> Loading section .dtors, size 0x8 lma ffffffff880145f0
=> Loading section .rdata, size 0x2940 lma ffffffff88014600
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016f40
=> Loading section .data, size 0x4cc lma ffffffff88016f58
=> Start address ffffffff88000004
=> Transfer rate: 762080 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[231/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid
Time: 0:00:00.271611 psxmsgq04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13660 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013660
=> Loading section .init, size 0x48 lma ffffffff880136e0
=> Loading section .fini, size 0x30 lma ffffffff88013728
=> Loading section .ctors, size 0x8 lma ffffffff88013758
=> Loading section .dtors, size 0x8 lma ffffffff88013760
=> Loading section .rdata, size 0x25ac lma ffffffff88013770
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015d20
=> Loading section .data, size 0x490 lma ffffffff88015d38
=> Start address ffffffff88000004
=> Transfer rate: 724448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[232/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:224 W:0 | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid
Time: 0:00:00.273463 psxmutexattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107c0
=> Loading section .init, size 0x48 lma ffffffff88010830
=> Loading section .fini, size 0x30 lma ffffffff88010878
=> Loading section .ctors, size 0x8 lma ffffffff880108a8
=> Loading section .dtors, size 0x8 lma ffffffff880108b0
=> Loading section .rdata, size 0x1d19 lma ffffffff880108c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125e0
=> Loading section .data, size 0x480 lma ffffffff880125f8
=> Start address ffffffff88000004
=> Transfer rate: 611144 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[233/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxndbm01.exe
Result: invalid
Time: 0:00:00.256461 psxndbm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019700
=> Loading section .init, size 0x48 lma ffffffff88019770
=> Loading section .fini, size 0x30 lma ffffffff880197b8
=> Loading section .ctors, size 0x8 lma ffffffff880197e8
=> Loading section .dtors, size 0x8 lma ffffffff880197f0
=> Loading section .rdata, size 0x24a0 lma ffffffff88019800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bca0
=> Loading section .data, size 0x458 lma ffffffff8801bcb8
=> Start address ffffffff88000004
=> Transfer rate: 919616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[234/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxobj01.exe
Result: invalid
Time: 0:00:00.274273 psxobj01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffe0
=> Loading section .init, size 0x48 lma ffffffff88010050
=> Loading section .fini, size 0x30 lma ffffffff88010098
=> Loading section .ctors, size 0x8 lma ffffffff880100c8
=> Loading section .dtors, size 0x8 lma ffffffff880100d0
=> Loading section .rdata, size 0x1b7d lma ffffffff880100e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c60
=> Loading section .data, size 0x480 lma ffffffff88011c78
=> Start address ffffffff88000004
=> Transfer rate: 591720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[235/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxonce01.exe
Result: invalid
Time: 0:00:00.267919 psxonce01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105f0
=> Loading section .init, size 0x48 lma ffffffff88010660
=> Loading section .fini, size 0x30 lma ffffffff880106a8
=> Loading section .ctors, size 0x8 lma ffffffff880106d8
=> Loading section .dtors, size 0x8 lma ffffffff880106e0
=> Loading section .rdata, size 0x1bbd lma ffffffff880106f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122b0
=> Loading section .data, size 0x470 lma ffffffff880122c8
=> Start address ffffffff88000004
=> Transfer rate: 604520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[236/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid
Time: 0:00:00.288479 psxpasswd01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x145c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880145c0
=> Loading section .init, size 0x48 lma ffffffff88014640
=> Loading section .fini, size 0x30 lma ffffffff88014688
=> Loading section .ctors, size 0x8 lma ffffffff880146b8
=> Loading section .dtors, size 0x8 lma ffffffff880146c0
=> Loading section .rdata, size 0x1fc4 lma ffffffff880146d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016698
=> Loading section .data, size 0x4f0 lma ffffffff880166b0
=> Start address ffffffff88000004
=> Transfer rate: 744608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[237/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid
Time: 0:00:00.263573 psxpasswd02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1e680 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801e680
=> Loading section .init, size 0x48 lma ffffffff8801e700
=> Loading section .fini, size 0x30 lma ffffffff8801e748
=> Loading section .ctors, size 0x8 lma ffffffff8801e778
=> Loading section .dtors, size 0x8 lma ffffffff8801e780
=> Loading section .rdata, size 0x2798 lma ffffffff8801e790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020f28
=> Loading section .data, size 0x65c lma ffffffff88020f40
=> Start address ffffffff88000004
=> Transfer rate: 1092768 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[238/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxpipe01.exe
Result: invalid
Time: 0:00:00.275718 psxpipe01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18f20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018f20
=> Loading section .init, size 0x48 lma ffffffff88018fa0
=> Loading section .fini, size 0x30 lma ffffffff88018fe8
=> Loading section .ctors, size 0x8 lma ffffffff88019018
=> Loading section .dtors, size 0x8 lma ffffffff88019020
=> Loading section .rdata, size 0x2360 lma ffffffff88019030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b390
=> Loading section .data, size 0x5ec lma ffffffff8801b3a8
=> Start address ffffffff88000004
=> Transfer rate: 904288 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[239/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid
Time: 0:00:00.276538 psxrdwrv.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13e80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013e80
=> Loading section .init, size 0x48 lma ffffffff88013ef0
=> Loading section .fini, size 0x30 lma ffffffff88013f38
=> Loading section .ctors, size 0x8 lma ffffffff88013f68
=> Loading section .dtors, size 0x8 lma ffffffff88013f70
=> Loading section .rdata, size 0x28a0 lma ffffffff88013f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016820
=> Loading section .data, size 0x458 lma ffffffff88016838
=> Start address ffffffff88000004
=> Transfer rate: 746560 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[240/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:232 W:0 | mipstx39/jmr3904: psxreaddir.exe
Result: invalid
Time: 0:00:00.268259 psxreaddir.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ae0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012ae0
=> Loading section .init, size 0x48 lma ffffffff88012b50
=> Loading section .fini, size 0x30 lma ffffffff88012b98
=> Loading section .ctors, size 0x8 lma ffffffff88012bc8
=> Loading section .dtors, size 0x8 lma ffffffff88012bd0
=> Loading section .rdata, size 0x2591 lma ffffffff88012be0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015178
=> Loading section .data, size 0x52c lma ffffffff88015190
=> Start address ffffffff88000004
=> Transfer rate: 701800 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[241/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid
Time: 0:00:00.274657 psxrwlock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x152b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880152b0
=> Loading section .init, size 0x48 lma ffffffff88015330
=> Loading section .fini, size 0x30 lma ffffffff88015378
=> Loading section .ctors, size 0x8 lma ffffffff880153a8
=> Loading section .dtors, size 0x8 lma ffffffff880153b0
=> Loading section .rdata, size 0x3058 lma ffffffff880153c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018418
=> Loading section .data, size 0x4dc lma ffffffff88018430
=> Start address ffffffff88000004
=> Transfer rate: 804896 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[242/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxsem01.exe
Result: invalid
Time: 0:00:00.266825 psxsem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ce50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801ce50
=> Loading section .init, size 0x48 lma ffffffff8801ced0
=> Loading section .fini, size 0x30 lma ffffffff8801cf18
=> Loading section .ctors, size 0x8 lma ffffffff8801cf48
=> Loading section .dtors, size 0x8 lma ffffffff8801cf50
=> Loading section .rdata, size 0x3580 lma ffffffff8801cf60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880204e0
=> Loading section .data, size 0x5fc lma ffffffff880204f8
=> Start address ffffffff88000004
=> Transfer rate: 1070944 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[243/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxshm01.exe
Result: invalid
Time: 0:00:00.263483 psxshm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012ea0
=> Loading section .init, size 0x48 lma ffffffff88012f20
=> Loading section .fini, size 0x30 lma ffffffff88012f68
=> Loading section .ctors, size 0x8 lma ffffffff88012f98
=> Loading section .dtors, size 0x8 lma ffffffff88012fa0
=> Loading section .rdata, size 0x249c lma ffffffff88012fb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015450
=> Loading section .data, size 0x498 lma ffffffff88015468
=> Start address ffffffff88000004
=> Transfer rate: 706464 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[244/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxshm02.exe
Result: invalid
Time: 0:00:00.275236 psxshm02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013190
=> Loading section .init, size 0x48 lma ffffffff88013210
=> Loading section .fini, size 0x30 lma ffffffff88013258
=> Loading section .ctors, size 0x8 lma ffffffff88013288
=> Loading section .dtors, size 0x8 lma ffffffff88013290
=> Loading section .rdata, size 0x249c lma ffffffff880132a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015740
=> Loading section .data, size 0x498 lma ffffffff88015758
=> Start address ffffffff88000004
=> Transfer rate: 712480 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[245/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxsignal01.exe
Result: invalid
Time: 0:00:00.269273 psxsignal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18d10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018d10
=> Loading section .init, size 0x48 lma ffffffff88018d90
=> Loading section .fini, size 0x30 lma ffffffff88018dd8
=> Loading section .ctors, size 0x8 lma ffffffff88018e08
=> Loading section .dtors, size 0x8 lma ffffffff88018e10
=> Loading section .rdata, size 0x2518 lma ffffffff88018e20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b338
=> Loading section .data, size 0x69c lma ffffffff8801b350
=> Start address ffffffff88000004
=> Transfer rate: 904992 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[246/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxsignal02.exe
Result: invalid
Time: 0:00:00.270107 psxsignal02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013700
=> Loading section .init, size 0x48 lma ffffffff88013780
=> Loading section .fini, size 0x30 lma ffffffff880137c8
=> Loading section .ctors, size 0x8 lma ffffffff880137f8
=> Loading section .dtors, size 0x8 lma ffffffff88013800
=> Loading section .rdata, size 0x1d18 lma ffffffff88013810
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015528
=> Loading section .data, size 0x4f0 lma ffffffff88015540
=> Start address ffffffff88000004
=> Transfer rate: 708928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[247/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxsignal03.exe
Result: invalid
Time: 0:00:00.266193 psxsignal03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013650
=> Loading section .init, size 0x48 lma ffffffff880136d0
=> Loading section .fini, size 0x30 lma ffffffff88013718
=> Loading section .ctors, size 0x8 lma ffffffff88013748
=> Loading section .dtors, size 0x8 lma ffffffff88013750
=> Loading section .rdata, size 0x1e98 lma ffffffff88013760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880155f8
=> Loading section .data, size 0x478 lma ffffffff88015610
=> Start address ffffffff88000004
=> Transfer rate: 709632 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[248/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:240 W:0 | mipstx39/jmr3904: psxsignal04.exe
Result: invalid
Time: 0:00:00.277349 psxsignal04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013650
=> Loading section .init, size 0x48 lma ffffffff880136d0
=> Loading section .fini, size 0x30 lma ffffffff88013718
=> Loading section .ctors, size 0x8 lma ffffffff88013748
=> Loading section .dtors, size 0x8 lma ffffffff88013750
=> Loading section .rdata, size 0x1eb0 lma ffffffff88013760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015610
=> Loading section .data, size 0x478 lma ffffffff88015628
=> Start address ffffffff88000004
=> Transfer rate: 709824 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[249/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxsignal05.exe
Result: invalid
Time: 0:00:00.272625 psxsignal05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11770 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011770
=> Loading section .init, size 0x48 lma ffffffff880117f0
=> Loading section .fini, size 0x30 lma ffffffff88011838
=> Loading section .ctors, size 0x8 lma ffffffff88011868
=> Loading section .dtors, size 0x8 lma ffffffff88011870
=> Loading section .rdata, size 0x1c68 lma ffffffff88011880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134e8
=> Loading section .data, size 0x458 lma ffffffff88013500
=> Start address ffffffff88000004
=> Transfer rate: 641664 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[250/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxsignal06.exe
Result: invalid
Time: 0:00:00.275936 psxsignal06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x137c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880137c0
=> Loading section .init, size 0x48 lma ffffffff88013840
=> Loading section .fini, size 0x30 lma ffffffff88013888
=> Loading section .ctors, size 0x8 lma ffffffff880138b8
=> Loading section .dtors, size 0x8 lma ffffffff880138c0
=> Loading section .rdata, size 0x1d40 lma ffffffff880138d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015610
=> Loading section .data, size 0x46c lma ffffffff88015628
=> Start address ffffffff88000004
=> Transfer rate: 709728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[251/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxsignal07.exe
Result: invalid
Time: 0:00:00.270745 psxsignal07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16380 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016380
=> Loading section .init, size 0x48 lma ffffffff88016400
=> Loading section .fini, size 0x30 lma ffffffff88016448
=> Loading section .ctors, size 0x8 lma ffffffff88016478
=> Loading section .dtors, size 0x8 lma ffffffff88016480
=> Loading section .rdata, size 0x1e98 lma ffffffff88016490
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018328
=> Loading section .data, size 0x4e4 lma ffffffff88018340
=> Start address ffffffff88000004
=> Transfer rate: 803040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[252/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxsignal08.exe
Result: invalid
Time: 0:00:00.265529 psxsignal08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15b50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015b50
=> Loading section .init, size 0x48 lma ffffffff88015bd0
=> Loading section .fini, size 0x30 lma ffffffff88015c18
=> Loading section .ctors, size 0x8 lma ffffffff88015c48
=> Loading section .dtors, size 0x8 lma ffffffff88015c50
=> Loading section .rdata, size 0x2210 lma ffffffff88015c60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017e70
=> Loading section .data, size 0x46c lma ffffffff88017e88
=> Start address ffffffff88000004
=> Transfer rate: 792416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[253/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxspin01.exe
Result: invalid
Time: 0:00:00.262308 psxspin01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b70
=> Loading section .init, size 0x48 lma ffffffff88010be0
=> Loading section .fini, size 0x30 lma ffffffff88010c28
=> Loading section .ctors, size 0x8 lma ffffffff88010c58
=> Loading section .dtors, size 0x8 lma ffffffff88010c60
=> Loading section .rdata, size 0x1c44 lma ffffffff88010c70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b8
=> Loading section .data, size 0x458 lma ffffffff880128d0
=> Start address ffffffff88000004
=> Transfer rate: 616672 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[254/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxstack01.exe
Result: invalid
Time: 0:00:00.268470 psxstack01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11cc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011cc0
=> Loading section .init, size 0x48 lma ffffffff88011d30
=> Loading section .fini, size 0x30 lma ffffffff88011d78
=> Loading section .ctors, size 0x8 lma ffffffff88011da8
=> Loading section .dtors, size 0x8 lma ffffffff88011db0
=> Loading section .rdata, size 0x1b75 lma ffffffff88011dc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013938
=> Loading section .data, size 0x468 lma ffffffff88013950
=> Start address ffffffff88000004
=> Transfer rate: 650600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[255/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxstack02.exe
Result: invalid
Time: 0:00:00.276493 psxstack02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ca0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011ca0
=> Loading section .init, size 0x48 lma ffffffff88011d10
=> Loading section .fini, size 0x30 lma ffffffff88011d58
=> Loading section .ctors, size 0x8 lma ffffffff88011d88
=> Loading section .dtors, size 0x8 lma ffffffff88011d90
=> Loading section .rdata, size 0x1b75 lma ffffffff88011da0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013918
=> Loading section .data, size 0x468 lma ffffffff88013930
=> Start address ffffffff88000004
=> Transfer rate: 650344 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[256/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:248 W:0 | mipstx39/jmr3904: psxstat.exe
Result: invalid
Time: 0:00:00.275044 psxstat.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x20e40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88020e40
=> Loading section .init, size 0x48 lma ffffffff88020eb0
=> Loading section .fini, size 0x30 lma ffffffff88020ef8
=> Loading section .ctors, size 0x8 lma ffffffff88020f28
=> Loading section .dtors, size 0x8 lma ffffffff88020f30
=> Loading section .rdata, size 0x41d8 lma ffffffff88020f40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025118
=> Loading section .data, size 0x7b0 lma ffffffff88025130
=> Start address ffffffff88000004
=> Transfer rate: 1230528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[257/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid
Time: 0:00:00.283024 psxstrsignal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13080 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013080
=> Loading section .init, size 0x48 lma ffffffff880130f0
=> Loading section .fini, size 0x30 lma ffffffff88013138
=> Loading section .ctors, size 0x8 lma ffffffff88013168
=> Loading section .dtors, size 0x8 lma ffffffff88013170
=> Loading section .rdata, size 0x20c8 lma ffffffff88013180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015248
=> Loading section .data, size 0x6b4 lma ffffffff88015260
=> Start address ffffffff88000004
=> Transfer rate: 706656 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[258/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxsysconf.exe
Result: invalid
Time: 0:00:00.271710 psxsysconf.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x117f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880117f0
=> Loading section .init, size 0x48 lma ffffffff88011860
=> Loading section .fini, size 0x30 lma ffffffff880118a8
=> Loading section .ctors, size 0x8 lma ffffffff880118d8
=> Loading section .dtors, size 0x8 lma ffffffff880118e0
=> Loading section .rdata, size 0x2604 lma ffffffff880118f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ef8
=> Loading section .data, size 0x460 lma ffffffff88013f10
=> Start address ffffffff88000004
=> Transfer rate: 662304 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[259/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid
Time: 0:00:00.272921 psxthreadname01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=> Loading section .init, size 0x48 lma ffffffff880109b0
=> Loading section .fini, size 0x30 lma ffffffff880109f8
=> Loading section .ctors, size 0x8 lma ffffffff88010a28
=> Loading section .dtors, size 0x8 lma ffffffff88010a30
=> Loading section .rdata, size 0x1af9 lma ffffffff88010a40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012540
=> Loading section .data, size 0x460 lma ffffffff88012558
=> Start address ffffffff88000004
=> Transfer rate: 609608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[260/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxtime.exe
Result: invalid
Time: 0:00:00.275705 psxtime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17f30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017f30
=> Loading section .init, size 0x48 lma ffffffff88017fa0
=> Loading section .fini, size 0x30 lma ffffffff88017fe8
=> Loading section .ctors, size 0x8 lma ffffffff88018018
=> Loading section .dtors, size 0x8 lma ffffffff88018020
=> Loading section .rdata, size 0x252c lma ffffffff88018030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a560
=> Loading section .data, size 0x730 lma ffffffff8801a578
=> Start address ffffffff88000004
=> Transfer rate: 877792 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[261/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxtimer01.exe
Result: invalid
Time: 0:00:00.276735 psxtimer01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x23310 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88023310
=> Loading section .init, size 0x48 lma ffffffff88023390
=> Loading section .fini, size 0x30 lma ffffffff880233d8
=> Loading section .ctors, size 0x8 lma ffffffff88023408
=> Loading section .dtors, size 0x8 lma ffffffff88023410
=> Loading section .rdata, size 0x3594 lma ffffffff88023420
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880269b8
=> Loading section .data, size 0x674 lma ffffffff880269d0
=> Start address ffffffff88000004
=> Transfer rate: 1278400 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[262/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxtimer02.exe
Result: invalid
Time: 0:00:00.268047 psxtimer02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13c50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013c50
=> Loading section .init, size 0x48 lma ffffffff88013cd0
=> Loading section .fini, size 0x30 lma ffffffff88013d18
=> Loading section .ctors, size 0x8 lma ffffffff88013d48
=> Loading section .dtors, size 0x8 lma ffffffff88013d50
=> Loading section .rdata, size 0x2a48 lma ffffffff88013d60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880167a8
=> Loading section .data, size 0x490 lma ffffffff880167c0
=> Start address ffffffff88000004
=> Transfer rate: 746048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[263/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxtimes01.exe
Result: invalid
Time: 0:00:00.270605 psxtimes01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10920 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010920
=> Loading section .init, size 0x48 lma ffffffff88010990
=> Loading section .fini, size 0x30 lma ffffffff880109d8
=> Loading section .ctors, size 0x8 lma ffffffff88010a08
=> Loading section .dtors, size 0x8 lma ffffffff88010a10
=> Loading section .rdata, size 0x1b59 lma ffffffff88010a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012580
=> Loading section .data, size 0x458 lma ffffffff88012598
=> Start address ffffffff88000004
=> Transfer rate: 610056 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[264/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:256 W:0 | mipstx39/jmr3904: psxualarm.exe
Result: invalid
Time: 0:00:00.269346 psxualarm.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18a30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88018a30
=> Loading section .init, size 0x48 lma ffffffff88018ab0
=> Loading section .fini, size 0x30 lma ffffffff88018af8
=> Loading section .ctors, size 0x8 lma ffffffff88018b28
=> Loading section .dtors, size 0x8 lma ffffffff88018b30
=> Loading section .rdata, size 0x2380 lma ffffffff88018b40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aec0
=> Loading section .data, size 0x694 lma ffffffff8801aed8
=> Start address ffffffff88000004
=> Transfer rate: 895776 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[265/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxusleep.exe
Result: invalid
Time: 0:00:00.275054 psxusleep.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x189f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880189f0
=> Loading section .init, size 0x48 lma ffffffff88018a60
=> Loading section .fini, size 0x30 lma ffffffff88018aa8
=> Loading section .ctors, size 0x8 lma ffffffff88018ad8
=> Loading section .dtors, size 0x8 lma ffffffff88018ae0
=> Loading section .rdata, size 0x22b0 lma ffffffff88018af0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ada0
=> Loading section .data, size 0x664 lma ffffffff8801adb8
=> Start address ffffffff88000004
=> Transfer rate: 893088 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[266/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid
Time: 0:00:00.257924 psxtmbarrier01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10630 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010630
=> Loading section .init, size 0x48 lma ffffffff880106a0
=> Loading section .fini, size 0x30 lma ffffffff880106e8
=> Loading section .ctors, size 0x8 lma ffffffff88010718
=> Loading section .dtors, size 0x8 lma ffffffff88010720
=> Loading section .rdata, size 0x1a85 lma ffffffff88010730
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121b8
=> Loading section .data, size 0x448 lma ffffffff880121d0
=> Start address ffffffff88000004
=> Transfer rate: 602216 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[267/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid
Time: 0:00:00.270736 psxtmbarrier02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108d0
=> Loading section .init, size 0x48 lma ffffffff88010940
=> Loading section .fini, size 0x30 lma ffffffff88010988
=> Loading section .ctors, size 0x8 lma ffffffff880109b8
=> Loading section .dtors, size 0x8 lma ffffffff880109c0
=> Loading section .rdata, size 0x1a8d lma ffffffff880109d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012460
=> Loading section .data, size 0x450 lma ffffffff88012478
=> Start address ffffffff88000004
=> Transfer rate: 607720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[268/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid
Time: 0:00:00.274703 psxtmbarrier03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10810 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010810
=> Loading section .init, size 0x48 lma ffffffff88010880
=> Loading section .fini, size 0x30 lma ffffffff880108c8
=> Loading section .ctors, size 0x8 lma ffffffff880108f8
=> Loading section .dtors, size 0x8 lma ffffffff88010900
=> Loading section .rdata, size 0x1ab5 lma ffffffff88010910
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123c8
=> Loading section .data, size 0x450 lma ffffffff880123e0
=> Start address ffffffff88000004
=> Transfer rate: 606504 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[269/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid
Time: 0:00:00.273244 psxtmbarrier04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c10
=> Loading section .init, size 0x48 lma ffffffff88010c80
=> Loading section .fini, size 0x30 lma ffffffff88010cc8
=> Loading section .ctors, size 0x8 lma ffffffff88010cf8
=> Loading section .dtors, size 0x8 lma ffffffff88010d00
=> Loading section .rdata, size 0x1a85 lma ffffffff88010d10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012798
=> Loading section .data, size 0x450 lma ffffffff880127b0
=> Start address ffffffff88000004
=> Transfer rate: 614312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[270/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid
Time: 0:00:00.270773 psxtmbarrierattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010650
=> Loading section .init, size 0x48 lma ffffffff880106c0
=> Loading section .fini, size 0x30 lma ffffffff88010708
=> Loading section .ctors, size 0x8 lma ffffffff88010738
=> Loading section .dtors, size 0x8 lma ffffffff88010740
=> Loading section .rdata, size 0x1b15 lma ffffffff88010750
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012268
=> Loading section .data, size 0x448 lma ffffffff88012280
=> Start address ffffffff88000004
=> Transfer rate: 603624 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[271/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid
Time: 0:00:00.272909 psxtmcleanup01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10660 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010660
=> Loading section .init, size 0x48 lma ffffffff880106d0
=> Loading section .fini, size 0x30 lma ffffffff88010718
=> Loading section .ctors, size 0x8 lma ffffffff88010748
=> Loading section .dtors, size 0x8 lma ffffffff88010750
=> Loading section .rdata, size 0x1a85 lma ffffffff88010760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121e8
=> Loading section .data, size 0x480 lma ffffffff88012200
=> Start address ffffffff88000004
=> Transfer rate: 603048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[272/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:264 W:0 | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid
Time: 0:00:00.275400 psxtmclocknanosleep01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10fb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010fb0
=> Loading section .init, size 0x48 lma ffffffff88011020
=> Loading section .fini, size 0x30 lma ffffffff88011068
=> Loading section .ctors, size 0x8 lma ffffffff88011098
=> Loading section .dtors, size 0x8 lma ffffffff880110a0
=> Loading section .rdata, size 0x1a2d lma ffffffff880110b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ae0
=> Loading section .data, size 0x458 lma ffffffff88012af8
=> Start address ffffffff88000004
=> Transfer rate: 621096 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[273/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid
Time: 0:00:00.274369 psxtmclocknanosleep02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110c0
=> Loading section .init, size 0x48 lma ffffffff88011130
=> Loading section .fini, size 0x30 lma ffffffff88011178
=> Loading section .ctors, size 0x8 lma ffffffff880111a8
=> Loading section .dtors, size 0x8 lma ffffffff880111b0
=> Loading section .rdata, size 0x1a85 lma ffffffff880111c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c48
=> Loading section .data, size 0x458 lma ffffffff88012c60
=> Start address ffffffff88000004
=> Transfer rate: 623976 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[274/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid
Time: 0:00:00.271711 psxtmclocknanosleep03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110c0
=> Loading section .init, size 0x48 lma ffffffff88011130
=> Loading section .fini, size 0x30 lma ffffffff88011178
=> Loading section .ctors, size 0x8 lma ffffffff880111a8
=> Loading section .dtors, size 0x8 lma ffffffff880111b0
=> Loading section .rdata, size 0x1a85 lma ffffffff880111c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c48
=> Loading section .data, size 0x458 lma ffffffff88012c60
=> Start address ffffffff88000004
=> Transfer rate: 623976 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[275/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid
Time: 0:00:00.271520 psxtmcond01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10720 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010720
=> Loading section .init, size 0x48 lma ffffffff88010790
=> Loading section .fini, size 0x30 lma ffffffff880107d8
=> Loading section .ctors, size 0x8 lma ffffffff88010808
=> Loading section .dtors, size 0x8 lma ffffffff88010810
=> Loading section .rdata, size 0x1a9d lma ffffffff88010820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122c0
=> Loading section .data, size 0x448 lma ffffffff880122d8
=> Start address ffffffff88000004
=> Transfer rate: 604328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[276/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid
Time: 0:00:00.268908 psxtmcond02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109c0
=> Loading section .init, size 0x48 lma ffffffff88010a30
=> Loading section .fini, size 0x30 lma ffffffff88010a78
=> Loading section .ctors, size 0x8 lma ffffffff88010aa8
=> Loading section .dtors, size 0x8 lma ffffffff88010ab0
=> Loading section .rdata, size 0x1a95 lma ffffffff88010ac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012558
=> Loading section .data, size 0x448 lma ffffffff88012570
=> Start address ffffffff88000004
=> Transfer rate: 609640 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[277/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid
Time: 0:00:00.273039 psxtmcond03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11e10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011e10
=> Loading section .init, size 0x48 lma ffffffff88011e80
=> Loading section .fini, size 0x30 lma ffffffff88011ec8
=> Loading section .ctors, size 0x8 lma ffffffff88011ef8
=> Loading section .dtors, size 0x8 lma ffffffff88011f00
=> Loading section .rdata, size 0x1abd lma ffffffff88011f10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139d0
=> Loading section .data, size 0x450 lma ffffffff880139e8
=> Start address ffffffff88000004
=> Transfer rate: 651624 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[278/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid
Time: 0:00:00.267007 psxtmcond04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11de0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011de0
=> Loading section .init, size 0x48 lma ffffffff88011e50
=> Loading section .fini, size 0x30 lma ffffffff88011e98
=> Loading section .ctors, size 0x8 lma ffffffff88011ec8
=> Loading section .dtors, size 0x8 lma ffffffff88011ed0
=> Loading section .rdata, size 0x1ab5 lma ffffffff88011ee0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013998
=> Loading section .data, size 0x450 lma ffffffff880139b0
=> Start address ffffffff88000004
=> Transfer rate: 651176 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[279/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid
Time: 0:00:00.253914 psxtmcond05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109c0
=> Loading section .init, size 0x48 lma ffffffff88010a30
=> Loading section .fini, size 0x30 lma ffffffff88010a78
=> Loading section .ctors, size 0x8 lma ffffffff88010aa8
=> Loading section .dtors, size 0x8 lma ffffffff88010ab0
=> Loading section .rdata, size 0x1a9d lma ffffffff88010ac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012560
=> Loading section .data, size 0x448 lma ffffffff88012578
=> Start address ffffffff88000004
=> Transfer rate: 609704 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[280/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:272 W:0 | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid
Time: 0:00:00.256468 psxtmcond06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11f70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011f70
=> Loading section .init, size 0x48 lma ffffffff88011fe0
=> Loading section .fini, size 0x30 lma ffffffff88012028
=> Loading section .ctors, size 0x8 lma ffffffff88012058
=> Loading section .dtors, size 0x8 lma ffffffff88012060
=> Loading section .rdata, size 0x1ac5 lma ffffffff88012070
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b38
=> Loading section .data, size 0x450 lma ffffffff88013b50
=> Start address ffffffff88000004
=> Transfer rate: 654504 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[281/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid
Time: 0:00:00.257702 psxtmcond07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b00
=> Loading section .init, size 0x48 lma ffffffff88011b70
=> Loading section .fini, size 0x30 lma ffffffff88011bb8
=> Loading section .ctors, size 0x8 lma ffffffff88011be8
=> Loading section .dtors, size 0x8 lma ffffffff88011bf0
=> Loading section .rdata, size 0x1ac5 lma ffffffff88011c00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136c8
=> Loading section .data, size 0x450 lma ffffffff880136e0
=> Start address ffffffff88000004
=> Transfer rate: 645416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[282/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid
Time: 0:00:00.272366 psxtmcond08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x117e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880117e0
=> Loading section .init, size 0x48 lma ffffffff88011850
=> Loading section .fini, size 0x30 lma ffffffff88011898
=> Loading section .ctors, size 0x8 lma ffffffff880118c8
=> Loading section .dtors, size 0x8 lma ffffffff880118d0
=> Loading section .rdata, size 0x1ab5 lma ffffffff880118e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013398
=> Loading section .data, size 0x450 lma ffffffff880133b0
=> Start address ffffffff88000004
=> Transfer rate: 638888 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[283/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid
Time: 0:00:00.270392 psxtmcond09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11820 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011820
=> Loading section .init, size 0x48 lma ffffffff88011890
=> Loading section .fini, size 0x30 lma ffffffff880118d8
=> Loading section .ctors, size 0x8 lma ffffffff88011908
=> Loading section .dtors, size 0x8 lma ffffffff88011910
=> Loading section .rdata, size 0x1ac5 lma ffffffff88011920
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133e8
=> Loading section .data, size 0x450 lma ffffffff88013400
=> Start address ffffffff88000004
=> Transfer rate: 639528 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[284/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid
Time: 0:00:00.274260 psxtmcond10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11870 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011870
=> Loading section .init, size 0x48 lma ffffffff880118e0
=> Loading section .fini, size 0x30 lma ffffffff88011928
=> Loading section .ctors, size 0x8 lma ffffffff88011958
=> Loading section .dtors, size 0x8 lma ffffffff88011960
=> Loading section .rdata, size 0x1add lma ffffffff88011970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013450
=> Loading section .data, size 0x450 lma ffffffff88013468
=> Start address ffffffff88000004
=> Transfer rate: 640360 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[285/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid
Time: 0:00:00.275752 psxtmkey01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10930 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010930
=> Loading section .init, size 0x48 lma ffffffff880109a0
=> Loading section .fini, size 0x30 lma ffffffff880109e8
=> Loading section .ctors, size 0x8 lma ffffffff88010a18
=> Loading section .dtors, size 0x8 lma ffffffff88010a20
=> Loading section .rdata, size 0x1a85 lma ffffffff88010a30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124b8
=> Loading section .data, size 0x4b8 lma ffffffff880124d0
=> Start address ffffffff88000004
=> Transfer rate: 609256 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[286/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid
Time: 0:00:00.267441 psxtmkey02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e40
=> Loading section .init, size 0x48 lma ffffffff88010eb0
=> Loading section .fini, size 0x30 lma ffffffff88010ef8
=> Loading section .ctors, size 0x8 lma ffffffff88010f28
=> Loading section .dtors, size 0x8 lma ffffffff88010f30
=> Loading section .rdata, size 0x1aa5 lma ffffffff88010f40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e8
=> Loading section .data, size 0x4b8 lma ffffffff88012a00
=> Start address ffffffff88000004
=> Transfer rate: 619880 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[287/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid
Time: 0:00:00.275161 psxtmmq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x130d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880130d0
=> Loading section .init, size 0x48 lma ffffffff88013150
=> Loading section .fini, size 0x30 lma ffffffff88013198
=> Loading section .ctors, size 0x8 lma ffffffff880131c8
=> Loading section .dtors, size 0x8 lma ffffffff880131d0
=> Loading section .rdata, size 0x1d4c lma ffffffff880131e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014f30
=> Loading section .data, size 0x488 lma ffffffff88014f48
=> Start address ffffffff88000004
=> Transfer rate: 695840 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[288/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:280 W:0 | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid
Time: 0:00:00.274222 psxtmmqrcvblock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11320 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011320
=> Loading section .init, size 0x48 lma ffffffff88011390
=> Loading section .fini, size 0x30 lma ffffffff880113d8
=> Loading section .ctors, size 0x8 lma ffffffff88011408
=> Loading section .dtors, size 0x8 lma ffffffff88011410
=> Loading section .rdata, size 0x1aa5 lma ffffffff88011420
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ec8
=> Loading section .data, size 0x480 lma ffffffff88012ee0
=> Start address ffffffff88000004
=> Transfer rate: 629416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[289/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid
Time: 0:00:00.266532 psxtmmqrcvblock02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15040 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015040
=> Loading section .init, size 0x48 lma ffffffff880150c0
=> Loading section .fini, size 0x30 lma ffffffff88015108
=> Loading section .ctors, size 0x8 lma ffffffff88015138
=> Loading section .dtors, size 0x8 lma ffffffff88015140
=> Loading section .rdata, size 0x1c70 lma ffffffff88015150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016dc0
=> Loading section .data, size 0x4e8 lma ffffffff88016dd8
=> Start address ffffffff88000004
=> Transfer rate: 759232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[290/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid
Time: 0:00:00.258132 psxtmmutex01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10780 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010780
=> Loading section .init, size 0x48 lma ffffffff880107f0
=> Loading section .fini, size 0x30 lma ffffffff88010838
=> Loading section .ctors, size 0x8 lma ffffffff88010868
=> Loading section .dtors, size 0x8 lma ffffffff88010870
=> Loading section .rdata, size 0x1a9d lma ffffffff88010880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012320
=> Loading section .data, size 0x448 lma ffffffff88012338
=> Start address ffffffff88000004
=> Transfer rate: 605096 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[291/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid
Time: 0:00:00.269366 psxtmmutex02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10cb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010cb0
=> Loading section .init, size 0x48 lma ffffffff88010d20
=> Loading section .fini, size 0x30 lma ffffffff88010d68
=> Loading section .ctors, size 0x8 lma ffffffff88010d98
=> Loading section .dtors, size 0x8 lma ffffffff88010da0
=> Loading section .rdata, size 0x1a95 lma ffffffff88010db0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012848
=> Loading section .data, size 0x450 lma ffffffff88012860
=> Start address ffffffff88000004
=> Transfer rate: 615720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[292/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid
Time: 0:00:00.265946 psxtmmutex03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880114c0
=> Loading section .init, size 0x48 lma ffffffff88011530
=> Loading section .fini, size 0x30 lma ffffffff88011578
=> Loading section .ctors, size 0x8 lma ffffffff880115a8
=> Loading section .dtors, size 0x8 lma ffffffff880115b0
=> Loading section .rdata, size 0x1b2d lma ffffffff880115c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130f0
=> Loading section .data, size 0x448 lma ffffffff88013108
=> Start address ffffffff88000004
=> Transfer rate: 633384 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[293/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid
Time: 0:00:00.276458 psxtmmutex04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f80
=> Loading section .init, size 0x48 lma ffffffff88010ff0
=> Loading section .fini, size 0x30 lma ffffffff88011038
=> Loading section .ctors, size 0x8 lma ffffffff88011068
=> Loading section .dtors, size 0x8 lma ffffffff88011070
=> Loading section .rdata, size 0x1a9d lma ffffffff88011080
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b20
=> Loading section .data, size 0x450 lma ffffffff88012b38
=> Start address ffffffff88000004
=> Transfer rate: 621544 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[294/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid
Time: 0:00:00.263277 psxtmmutex05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f80
=> Loading section .init, size 0x48 lma ffffffff88010ff0
=> Loading section .fini, size 0x30 lma ffffffff88011038
=> Loading section .ctors, size 0x8 lma ffffffff88011068
=> Loading section .dtors, size 0x8 lma ffffffff88011070
=> Loading section .rdata, size 0x1aa5 lma ffffffff88011080
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b28
=> Loading section .data, size 0x450 lma ffffffff88012b40
=> Start address ffffffff88000004
=> Transfer rate: 621608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[295/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid
Time: 0:00:00.274052 psxtmmutex06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x111a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880111a0
=> Loading section .init, size 0x48 lma ffffffff88011210
=> Loading section .fini, size 0x30 lma ffffffff88011258
=> Loading section .ctors, size 0x8 lma ffffffff88011288
=> Loading section .dtors, size 0x8 lma ffffffff88011290
=> Loading section .rdata, size 0x1a9d lma ffffffff880112a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d40
=> Loading section .data, size 0x450 lma ffffffff88012d58
=> Start address ffffffff88000004
=> Transfer rate: 625896 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[296/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:288 W:0 | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid
Time: 0:00:00.263922 psxtmmutex07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11380 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011380
=> Loading section .init, size 0x48 lma ffffffff880113f0
=> Loading section .fini, size 0x30 lma ffffffff88011438
=> Loading section .ctors, size 0x8 lma ffffffff88011468
=> Loading section .dtors, size 0x8 lma ffffffff88011470
=> Loading section .rdata, size 0x1abd lma ffffffff88011480
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f40
=> Loading section .data, size 0x448 lma ffffffff88012f58
=> Start address ffffffff88000004
=> Transfer rate: 629928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[297/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid
Time: 0:00:00.267913 psxtmmutexattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109e0
=> Loading section .init, size 0x48 lma ffffffff88010a50
=> Loading section .fini, size 0x30 lma ffffffff88010a98
=> Loading section .ctors, size 0x8 lma ffffffff88010ac8
=> Loading section .dtors, size 0x8 lma ffffffff88010ad0
=> Loading section .rdata, size 0x1c85 lma ffffffff88010ae0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012768
=> Loading section .data, size 0x448 lma ffffffff88012780
=> Start address ffffffff88000004
=> Transfer rate: 613864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[298/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid
Time: 0:00:00.257670 psxtmnanosleep01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11000 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011000
=> Loading section .init, size 0x48 lma ffffffff88011070
=> Loading section .fini, size 0x30 lma ffffffff880110b8
=> Loading section .ctors, size 0x8 lma ffffffff880110e8
=> Loading section .dtors, size 0x8 lma ffffffff880110f0
=> Loading section .rdata, size 0x1a2d lma ffffffff88011100
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b30
=> Loading section .data, size 0x458 lma ffffffff88012b48
=> Start address ffffffff88000004
=> Transfer rate: 621736 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[299/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid
Time: 0:00:00.274973 psxtmnanosleep02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11100 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011100
=> Loading section .init, size 0x48 lma ffffffff88011170
=> Loading section .fini, size 0x30 lma ffffffff880111b8
=> Loading section .ctors, size 0x8 lma ffffffff880111e8
=> Loading section .dtors, size 0x8 lma ffffffff880111f0
=> Loading section .rdata, size 0x1a7d lma ffffffff88011200
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c80
=> Loading section .data, size 0x458 lma ffffffff88012c98
=> Start address ffffffff88000004
=> Transfer rate: 624424 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[300/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid
Time: 0:00:00.274919 psxtmonce01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x109b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880109b0
=> Loading section .init, size 0x48 lma ffffffff88010a20
=> Loading section .fini, size 0x30 lma ffffffff88010a68
=> Loading section .ctors, size 0x8 lma ffffffff88010a98
=> Loading section .dtors, size 0x8 lma ffffffff88010aa0
=> Loading section .rdata, size 0x1a75 lma ffffffff88010ab0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012528
=> Loading section .data, size 0x470 lma ffffffff88012540
=> Start address ffffffff88000004
=> Transfer rate: 609576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[301/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid
Time: 0:00:00.269897 psxtmrwlock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11580 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011580
=> Loading section .init, size 0x48 lma ffffffff880115f0
=> Loading section .fini, size 0x30 lma ffffffff88011638
=> Loading section .ctors, size 0x8 lma ffffffff88011668
=> Loading section .dtors, size 0x8 lma ffffffff88011670
=> Loading section .rdata, size 0x1c15 lma ffffffff88011680
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013298
=> Loading section .data, size 0x448 lma ffffffff880132b0
=> Start address ffffffff88000004
=> Transfer rate: 636776 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[302/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid
Time: 0:00:00.260389 psxtmrwlock02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10bd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010bd0
=> Loading section .init, size 0x48 lma ffffffff88010c40
=> Loading section .fini, size 0x30 lma ffffffff88010c88
=> Loading section .ctors, size 0x8 lma ffffffff88010cb8
=> Loading section .dtors, size 0x8 lma ffffffff88010cc0
=> Loading section .rdata, size 0x1a8d lma ffffffff88010cd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012760
=> Loading section .data, size 0x450 lma ffffffff88012778
=> Start address ffffffff88000004
=> Transfer rate: 613864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[303/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid
Time: 0:00:00.271461 psxtmrwlock03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11320 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011320
=> Loading section .init, size 0x48 lma ffffffff88011390
=> Loading section .fini, size 0x30 lma ffffffff880113d8
=> Loading section .ctors, size 0x8 lma ffffffff88011408
=> Loading section .dtors, size 0x8 lma ffffffff88011410
=> Loading section .rdata, size 0x1a95 lma ffffffff88011420
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012eb8
=> Loading section .data, size 0x450 lma ffffffff88012ed0
=> Start address ffffffff88000004
=> Transfer rate: 628904 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[304/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:296 W:0 | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid
Time: 0:00:00.264793 psxtmrwlock04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a20
=> Loading section .init, size 0x48 lma ffffffff88010a90
=> Loading section .fini, size 0x30 lma ffffffff88010ad8
=> Loading section .ctors, size 0x8 lma ffffffff88010b08
=> Loading section .dtors, size 0x8 lma ffffffff88010b10
=> Loading section .rdata, size 0x1a8d lma ffffffff88010b20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125b0
=> Loading section .data, size 0x450 lma ffffffff880125c8
=> Start address ffffffff88000004
=> Transfer rate: 610408 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[305/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid
Time: 0:00:00.276697 psxtmrwlock05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11160 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011160
=> Loading section .init, size 0x48 lma ffffffff880111d0
=> Loading section .fini, size 0x30 lma ffffffff88011218
=> Loading section .ctors, size 0x8 lma ffffffff88011248
=> Loading section .dtors, size 0x8 lma ffffffff88011250
=> Loading section .rdata, size 0x1a95 lma ffffffff88011260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cf8
=> Loading section .data, size 0x450 lma ffffffff88012d10
=> Start address ffffffff88000004
=> Transfer rate: 625320 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[306/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid
Time: 0:00:00.272493 psxtmrwlock06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b70
=> Loading section .init, size 0x48 lma ffffffff88010be0
=> Loading section .fini, size 0x30 lma ffffffff88010c28
=> Loading section .ctors, size 0x8 lma ffffffff88010c58
=> Loading section .dtors, size 0x8 lma ffffffff88010c60
=> Loading section .rdata, size 0x1a95 lma ffffffff88010c70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012708
=> Loading section .data, size 0x450 lma ffffffff88012720
=> Start address ffffffff88000004
=> Transfer rate: 613160 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[307/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid
Time: 0:00:00.268293 psxtmrwlock07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d70
=> Loading section .init, size 0x48 lma ffffffff88010de0
=> Loading section .fini, size 0x30 lma ffffffff88010e28
=> Loading section .ctors, size 0x8 lma ffffffff88010e58
=> Loading section .dtors, size 0x8 lma ffffffff88010e60
=> Loading section .rdata, size 0x1a8d lma ffffffff88010e70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012900
=> Loading section .data, size 0x450 lma ffffffff88012918
=> Start address ffffffff88000004
=> Transfer rate: 617192 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[308/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid
Time: 0:00:00.279495 psxtmsem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ee0
=> Loading section .init, size 0x48 lma ffffffff88010f50
=> Loading section .fini, size 0x30 lma ffffffff88010f98
=> Loading section .ctors, size 0x8 lma ffffffff88010fc8
=> Loading section .dtors, size 0x8 lma ffffffff88010fd0
=> Loading section .rdata, size 0x1b3d lma ffffffff88010fe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b20
=> Loading section .data, size 0x480 lma ffffffff88012b38
=> Start address ffffffff88000004
=> Transfer rate: 621928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[309/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid
Time: 0:00:00.268846 psxtmsem02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b90
=> Loading section .init, size 0x48 lma ffffffff88010c00
=> Loading section .fini, size 0x30 lma ffffffff88010c48
=> Loading section .ctors, size 0x8 lma ffffffff88010c78
=> Loading section .dtors, size 0x8 lma ffffffff88010c80
=> Loading section .rdata, size 0x1acd lma ffffffff88010c90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012760
=> Loading section .data, size 0x448 lma ffffffff88012778
=> Start address ffffffff88000004
=> Transfer rate: 613800 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[310/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid
Time: 0:00:00.270982 psxtmsem03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10750 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010750
=> Loading section .init, size 0x48 lma ffffffff880107c0
=> Loading section .fini, size 0x30 lma ffffffff88010808
=> Loading section .ctors, size 0x8 lma ffffffff88010838
=> Loading section .dtors, size 0x8 lma ffffffff88010840
=> Loading section .rdata, size 0x1a65 lma ffffffff88010850
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122b8
=> Loading section .data, size 0x450 lma ffffffff880122d0
=> Start address ffffffff88000004
=> Transfer rate: 604328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[311/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid
Time: 0:00:00.275525 psxtmsem04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010960
=> Loading section .init, size 0x48 lma ffffffff880109d0
=> Loading section .fini, size 0x30 lma ffffffff88010a18
=> Loading section .ctors, size 0x8 lma ffffffff88010a48
=> Loading section .dtors, size 0x8 lma ffffffff88010a50
=> Loading section .rdata, size 0x1a6d lma ffffffff88010a60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124d0
=> Loading section .data, size 0x450 lma ffffffff880124e8
=> Start address ffffffff88000004
=> Transfer rate: 608616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[312/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:304 W:0 | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid
Time: 0:00:00.271044 psxtmsem05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b60
=> Loading section .init, size 0x48 lma ffffffff88010bd0
=> Loading section .fini, size 0x30 lma ffffffff88010c18
=> Loading section .ctors, size 0x8 lma ffffffff88010c48
=> Loading section .dtors, size 0x8 lma ffffffff88010c50
=> Loading section .rdata, size 0x1a6d lma ffffffff88010c60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126d0
=> Loading section .data, size 0x450 lma ffffffff880126e8
=> Start address ffffffff88000004
=> Transfer rate: 612712 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[313/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid
Time: 0:00:00.275430 psxtmsleep01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11050 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011050
=> Loading section .init, size 0x48 lma ffffffff880110c0
=> Loading section .fini, size 0x30 lma ffffffff88011108
=> Loading section .ctors, size 0x8 lma ffffffff88011138
=> Loading section .dtors, size 0x8 lma ffffffff88011140
=> Loading section .rdata, size 0x1a2c lma ffffffff88011150
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b80
=> Loading section .data, size 0x454 lma ffffffff88012b98
=> Start address ffffffff88000004
=> Transfer rate: 622336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[314/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid
Time: 0:00:00.257543 psxtmsleep02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011130
=> Loading section .init, size 0x48 lma ffffffff880111a0
=> Loading section .fini, size 0x30 lma ffffffff880111e8
=> Loading section .ctors, size 0x8 lma ffffffff88011218
=> Loading section .dtors, size 0x8 lma ffffffff88011220
=> Loading section .rdata, size 0x1a74 lma ffffffff88011230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ca8
=> Loading section .data, size 0x45c lma ffffffff88012cc0
=> Start address ffffffff88000004
=> Transfer rate: 624768 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[315/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid
Time: 0:00:00.267902 psxtmthread01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105c0
=> Loading section .init, size 0x48 lma ffffffff88010630
=> Loading section .fini, size 0x30 lma ffffffff88010678
=> Loading section .ctors, size 0x8 lma ffffffff880106a8
=> Loading section .dtors, size 0x8 lma ffffffff880106b0
=> Loading section .rdata, size 0x1a5d lma ffffffff880106c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012120
=> Loading section .data, size 0x450 lma ffffffff88012138
=> Start address ffffffff88000004
=> Transfer rate: 601064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[316/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid
Time: 0:00:00.274340 psxtmthread02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10660 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010660
=> Loading section .init, size 0x48 lma ffffffff880106d0
=> Loading section .fini, size 0x30 lma ffffffff88010718
=> Loading section .ctors, size 0x8 lma ffffffff88010748
=> Loading section .dtors, size 0x8 lma ffffffff88010750
=> Loading section .rdata, size 0x1a55 lma ffffffff88010760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121b8
=> Loading section .data, size 0x450 lma ffffffff880121d0
=> Start address ffffffff88000004
=> Transfer rate: 602280 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[317/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid
Time: 0:00:00.268906 psxtmthread03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10580 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010580
=> Loading section .init, size 0x48 lma ffffffff880105f0
=> Loading section .fini, size 0x30 lma ffffffff88010638
=> Loading section .ctors, size 0x8 lma ffffffff88010668
=> Loading section .dtors, size 0x8 lma ffffffff88010670
=> Loading section .rdata, size 0x1a55 lma ffffffff88010680
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120d8
=> Loading section .data, size 0x450 lma ffffffff880120f0
=> Start address ffffffff88000004
=> Transfer rate: 600488 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[318/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid
Time: 0:00:00.255128 psxtmthread04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10950 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=> Loading section .init, size 0x48 lma ffffffff880109c0
=> Loading section .fini, size 0x30 lma ffffffff88010a08
=> Loading section .ctors, size 0x8 lma ffffffff88010a38
=> Loading section .dtors, size 0x8 lma ffffffff88010a40
=> Loading section .rdata, size 0x1a8d lma ffffffff88010a50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e0
=> Loading section .data, size 0x448 lma ffffffff880124f8
=> Start address ffffffff88000004
=> Transfer rate: 608680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[319/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid
Time: 0:00:00.268838 psxtmthread05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1a75 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e8
=> Loading section .data, size 0x450 lma ffffffff88012500
=> Start address ffffffff88000004
=> Transfer rate: 608808 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[320/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:312 W:0 | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid
Time: 0:00:00.261602 psxtmthread06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1a75 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e8
=> Loading section .data, size 0x450 lma ffffffff88012500
=> Start address ffffffff88000004
=> Transfer rate: 608808 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[321/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid
Time: 0:00:00.273841 psxtmthreadattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e10
=> Loading section .init, size 0x48 lma ffffffff88010e80
=> Loading section .fini, size 0x30 lma ffffffff88010ec8
=> Loading section .ctors, size 0x8 lma ffffffff88010ef8
=> Loading section .dtors, size 0x8 lma ffffffff88010f00
=> Loading section .rdata, size 0x1d9d lma ffffffff88010f10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cb0
=> Loading section .data, size 0x448 lma ffffffff88012cc8
=> Start address ffffffff88000004
=> Transfer rate: 624680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[322/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid
Time: 0:00:00.272328 rhdeadlockbrk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11bf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011bf0
=> Loading section .init, size 0x48 lma ffffffff88011c60
=> Loading section .fini, size 0x30 lma ffffffff88011ca8
=> Loading section .ctors, size 0x8 lma ffffffff88011cd8
=> Loading section .dtors, size 0x8 lma ffffffff88011ce0
=> Loading section .rdata, size 0x1ea1 lma ffffffff88011cf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b98
=> Loading section .data, size 0x480 lma ffffffff88013bb0
=> Start address ffffffff88000004
=> Transfer rate: 655624 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[323/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: rhilatency.exe
Result: invalid
Time: 0:00:00.270356 rhilatency.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100b0
=> Loading section .init, size 0x48 lma ffffffff88010120
=> Loading section .fini, size 0x30 lma ffffffff88010168
=> Loading section .ctors, size 0x8 lma ffffffff88010198
=> Loading section .dtors, size 0x8 lma ffffffff880101a0
=> Loading section .rdata, size 0x1de9 lma ffffffff880101b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fa0
=> Loading section .data, size 0x450 lma ffffffff88011fb8
=> Start address ffffffff88000004
=> Transfer rate: 597960 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[324/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: rhmlatency.exe
Result: invalid
Time: 0:00:00.263098 rhmlatency.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b00
=> Loading section .init, size 0x48 lma ffffffff88010b70
=> Loading section .fini, size 0x30 lma ffffffff88010bb8
=> Loading section .ctors, size 0x8 lma ffffffff88010be8
=> Loading section .dtors, size 0x8 lma ffffffff88010bf0
=> Loading section .rdata, size 0x1e45 lma ffffffff88010c00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a48
=> Loading section .data, size 0x480 lma ffffffff88012a60
=> Start address ffffffff88000004
=> Transfer rate: 620200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[325/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid
Time: 0:00:00.267584 rhsemshuffle.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x124a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880124a0
=> Loading section .init, size 0x48 lma ffffffff88012520
=> Loading section .fini, size 0x30 lma ffffffff88012568
=> Loading section .ctors, size 0x8 lma ffffffff88012598
=> Loading section .dtors, size 0x8 lma ffffffff880125a0
=> Loading section .rdata, size 0x1eb5 lma ffffffff880125b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014468
=> Loading section .data, size 0x490 lma ffffffff88014480
=> Start address ffffffff88000004
=> Transfer rate: 673832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[326/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid
Time: 0:00:00.266748 rhtaskpreempt.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fef0
=> Loading section .init, size 0x48 lma ffffffff8800ff60
=> Loading section .fini, size 0x30 lma ffffffff8800ffa8
=> Loading section .ctors, size 0x8 lma ffffffff8800ffd8
=> Loading section .dtors, size 0x8 lma ffffffff8800ffe0
=> Loading section .rdata, size 0x1e31 lma ffffffff8800fff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e28
=> Loading section .data, size 0x450 lma ffffffff88011e40
=> Start address ffffffff88000004
=> Transfer rate: 594952 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[327/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid
Time: 0:00:00.269856 rhtaskswitch.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd80
=> Loading section .init, size 0x48 lma ffffffff8800fdf0
=> Loading section .fini, size 0x30 lma ffffffff8800fe38
=> Loading section .ctors, size 0x8 lma ffffffff8800fe68
=> Loading section .dtors, size 0x8 lma ffffffff8800fe70
=> Loading section .rdata, size 0x1e31 lma ffffffff8800fe80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cb8
=> Loading section .data, size 0x450 lma ffffffff88011cd0
=> Start address ffffffff88000004
=> Transfer rate: 592008 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[328/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:320 W:0 | mipstx39/jmr3904: base_sp.exe
Result: invalid
Time: 0:00:00.269939 base_sp.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=> Loading section .init, size 0x48 lma ffffffff88010ae0
=> Loading section .fini, size 0x30 lma ffffffff88010b28
=> Loading section .ctors, size 0x8 lma ffffffff88010b58
=> Loading section .dtors, size 0x8 lma ffffffff88010b60
=> Loading section .rdata, size 0x1e7c lma ffffffff88010b70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129f0
=> Loading section .data, size 0x460 lma ffffffff88012a08
=> Start address ffffffff88000004
=> Transfer rate: 619232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[329/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: capture.exe
Result: invalid
Time: 0:00:00.273941 capture.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x30290 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88030290
=> Loading section .init, size 0x48 lma ffffffff88030310
=> Loading section .fini, size 0x30 lma ffffffff88030358
=> Loading section .ctors, size 0x8 lma ffffffff88030388
=> Loading section .dtors, size 0x8 lma ffffffff88030390
=> Loading section .rdata, size 0x5730 lma ffffffff880303a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88035ad0
=> Loading section .data, size 0x9bc lma ffffffff88035ae8
=> Start address ffffffff88000004
=> Transfer rate: 1778912 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[330/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: cdtest.exe
Result: invalid
Time: 0:00:00.267417 cdtest.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2e120 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8802e120
=> Loading section .init, size 0x48 lma ffffffff8802e1a0
=> Loading section .fini, size 0x30 lma ffffffff8802e1e8
=> Loading section .ctors, size 0x1c lma ffffffff8802e218
=> Loading section .dtors, size 0x8 lma ffffffff8802e234
=> Loading section .rdata, size 0x4654 lma ffffffff8802e240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88032898
=> Loading section .rel.dyn, size 0x20 lma ffffffff880328b0
=> Loading section .data, size 0x678 lma ffffffff880328d0
=> Loading section .sdata, size 0x4 lma ffffffff88032f48
=> Start address ffffffff88000004
=> Transfer rate: 1669664 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[331/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: fileio.exe
Result: invalid
Time: 0:00:00.271101 fileio.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x85db0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88085db0
=> Loading section .init, size 0x48 lma ffffffff88085e30
=> Loading section .fini, size 0x30 lma ffffffff88085e78
=> Loading section .ctors, size 0x8 lma ffffffff88085ea8
=> Loading section .dtors, size 0x8 lma ffffffff88085eb0
=> Loading section .rdata, size 0x12a38 lma ffffffff88085ec0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880988f8
=> Loading section .data, size 0x14e0 lma ffffffff88098910
=> Start address ffffffff88000004
=> Transfer rate: 5041984 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[332/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: hello.exe
Result: invalid
Time: 0:00:00.268387 hello.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17df0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017df0
=> Loading section .init, size 0x48 lma ffffffff88017e60
=> Loading section .fini, size 0x30 lma ffffffff88017ea8
=> Loading section .ctors, size 0x8 lma ffffffff88017ed8
=> Loading section .dtors, size 0x8 lma ffffffff88017ee0
=> Loading section .rdata, size 0x1ff8 lma ffffffff88017ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019ee8
=> Loading section .data, size 0x5e0 lma ffffffff88019f00
=> Start address ffffffff88000004
=> Transfer rate: 861888 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[333/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: iostream.exe
Result: invalid
Time: 0:00:00.272502 iostream.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x95d10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88095d10
=> Loading section .init, size 0x48 lma ffffffff88095d90
=> Loading section .fini, size 0x30 lma ffffffff88095dd8
=> Loading section .ctors, size 0x34 lma ffffffff88095e08
=> Loading section .dtors, size 0x8 lma ffffffff88095e3c
=> Loading section .rdata, size 0xa234 lma ffffffff88095e50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a0088
=> Loading section .rel.dyn, size 0x18 lma ffffffff880a00a0
=> Loading section .data, size 0x750 lma ffffffff880a00b8
=> Loading section .sdata, size 0x4 lma ffffffff880a0808
=> Start address ffffffff88000004
=> Transfer rate: 5259232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[334/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: minimum.exe
[335/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: nsecs.exe
Result: invalid
Time: 0:00:00.286090 nsecs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x18530 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88018530
=> Loading section .init, size 0x48 lma ffffffff880185a0
=> Loading section .fini, size 0x30 lma ffffffff880185e8
=> Loading section .ctors, size 0x8 lma ffffffff88018618
=> Loading section .dtors, size 0x8 lma ffffffff88018620
=> Loading section .rdata, size 0x2774 lma ffffffff88018630
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ada8
=> Loading section .data, size 0x65c lma ffffffff8801adc0
=> Start address ffffffff88000004
=> Transfer rate: 893056 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[336/596] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:328 W:0 | mipstx39/jmr3904: paranoia.exe
Result: invalid
Time: 0:00:00.270336 paranoia.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x22a80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88022a80
=> Loading section .init, size 0x48 lma ffffffff88022af0
=> Loading section .fini, size 0x30 lma ffffffff88022b38
=> Loading section .ctors, size 0x8 lma ffffffff88022b68
=> Loading section .dtors, size 0x8 lma ffffffff88022b70
=> Loading section .rdata, size 0x5190 lma ffffffff88022b80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027d10
=> Loading section .data, size 0x770 lma ffffffff88027d28
=> Start address ffffffff88000004
=> Transfer rate: 1320064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[337/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: ticker.exe
Result: invalid
Time: 0:00:00.270281 ticker.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11df0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011df0
=> Loading section .init, size 0x48 lma ffffffff88011e60
=> Loading section .fini, size 0x30 lma ffffffff88011ea8
=> Loading section .ctors, size 0x8 lma ffffffff88011ed8
=> Loading section .dtors, size 0x8 lma ffffffff88011ee0
=> Loading section .rdata, size 0x2028 lma ffffffff88011ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f18
=> Loading section .data, size 0x600 lma ffffffff88013f30
=> Start address ffffffff88000004
=> Transfer rate: 665920 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[338/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: unlimited.exe
Result: invalid
Time: 0:00:00.261044 unlimited.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x125f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880125f0
=> Loading section .init, size 0x48 lma ffffffff88012660
=> Loading section .fini, size 0x30 lma ffffffff880126a8
=> Loading section .ctors, size 0x8 lma ffffffff880126d8
=> Loading section .dtors, size 0x8 lma ffffffff880126e0
=> Loading section .rdata, size 0x1f60 lma ffffffff880126f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014650
=> Loading section .data, size 0x448 lma ffffffff88014668
=> Start address ffffffff88000004
=> Transfer rate: 677184 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[339/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: sp01.exe
Result: invalid
Time: 0:00:00.267998 sp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xc1e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800c1e0
=> Loading section .init, size 0x48 lma ffffffff8800c250
=> Loading section .fini, size 0x30 lma ffffffff8800c298
=> Loading section .ctors, size 0x8 lma ffffffff8800c2c8
=> Loading section .dtors, size 0x8 lma ffffffff8800c2d0
=> Loading section .rdata, size 0x1c20 lma ffffffff8800c2e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800df00
=> Loading section .data, size 0x360 lma ffffffff8800df18
=> Start address ffffffff88000004
=> Transfer rate: 463744 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[340/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: sp02.exe
Result: invalid
Time: 0:00:00.256005 sp02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x120a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880120a0
=> Loading section .init, size 0x48 lma ffffffff88012110
=> Loading section .fini, size 0x30 lma ffffffff88012158
=> Loading section .ctors, size 0x8 lma ffffffff88012188
=> Loading section .dtors, size 0x8 lma ffffffff88012190
=> Loading section .rdata, size 0x2301 lma ffffffff880121a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144a8
=> Loading section .data, size 0x460 lma ffffffff880144c0
=> Start address ffffffff88000004
=> Transfer rate: 673928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[341/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: sp03.exe
Result: invalid
Time: 0:00:00.271951 sp03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x122a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880122a0
=> Loading section .init, size 0x48 lma ffffffff88012310
=> Loading section .fini, size 0x30 lma ffffffff88012358
=> Loading section .ctors, size 0x8 lma ffffffff88012388
=> Loading section .dtors, size 0x8 lma ffffffff88012390
=> Loading section .rdata, size 0x20ec lma ffffffff880123a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014490
=> Loading section .data, size 0x480 lma ffffffff880144a8
=> Start address ffffffff88000004
=> Transfer rate: 674016 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[342/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: sp04.exe
Result: invalid
Time: 0:00:00.268636 sp04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13c30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013c30
=> Loading section .init, size 0x48 lma ffffffff88013cb0
=> Loading section .fini, size 0x30 lma ffffffff88013cf8
=> Loading section .ctors, size 0x8 lma ffffffff88013d28
=> Loading section .dtors, size 0x8 lma ffffffff88013d30
=> Loading section .rdata, size 0x2354 lma ffffffff88013d40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016098
=> Loading section .data, size 0x650 lma ffffffff880160b0
=> Start address ffffffff88000004
=> Transfer rate: 735136 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[343/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: sp05.exe
Result: invalid
Time: 0:00:00.266273 sp05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11300 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011300
=> Loading section .init, size 0x48 lma ffffffff88011370
=> Loading section .fini, size 0x30 lma ffffffff880113b8
=> Loading section .ctors, size 0x8 lma ffffffff880113e8
=> Loading section .dtors, size 0x8 lma ffffffff880113f0
=> Loading section .rdata, size 0x2155 lma ffffffff88011400
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013558
=> Loading section .data, size 0x460 lma ffffffff88013570
=> Start address ffffffff88000004
=> Transfer rate: 642600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[344/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:335 W:0 | mipstx39/jmr3904: sp06.exe
Result: invalid
Time: 0:00:00.275864 sp06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11470 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011470
=> Loading section .init, size 0x48 lma ffffffff880114e0
=> Loading section .fini, size 0x30 lma ffffffff88011528
=> Loading section .ctors, size 0x8 lma ffffffff88011558
=> Loading section .dtors, size 0x8 lma ffffffff88011560
=> Loading section .rdata, size 0x1fe1 lma ffffffff88011570
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013558
=> Loading section .data, size 0x460 lma ffffffff88013570
=> Start address ffffffff88000004
=> Transfer rate: 642568 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[345/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp07.exe
Result: invalid
Time: 0:00:00.271620 sp07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12d90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012d90
=> Loading section .init, size 0x48 lma ffffffff88012e10
=> Loading section .fini, size 0x30 lma ffffffff88012e58
=> Loading section .ctors, size 0x8 lma ffffffff88012e88
=> Loading section .dtors, size 0x8 lma ffffffff88012e90
=> Loading section .rdata, size 0x26a0 lma ffffffff88012ea0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015540
=> Loading section .data, size 0x630 lma ffffffff88015558
=> Start address ffffffff88000004
=> Transfer rate: 711680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[346/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp08.exe
Result: invalid
Time: 0:00:00.265421 sp08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103e0
=> Loading section .init, size 0x48 lma ffffffff88010450
=> Loading section .fini, size 0x30 lma ffffffff88010498
=> Loading section .ctors, size 0x8 lma ffffffff880104c8
=> Loading section .dtors, size 0x8 lma ffffffff880104d0
=> Loading section .rdata, size 0x2139 lma ffffffff880104e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012620
=> Loading section .data, size 0x450 lma ffffffff88012638
=> Start address ffffffff88000004
=> Transfer rate: 611272 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[347/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp11.exe
Result: invalid
Time: 0:00:00.276125 sp11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15da0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015da0
=> Loading section .init, size 0x48 lma ffffffff88015e20
=> Loading section .fini, size 0x30 lma ffffffff88015e68
=> Loading section .ctors, size 0x8 lma ffffffff88015e98
=> Loading section .dtors, size 0x8 lma ffffffff88015ea0
=> Loading section .rdata, size 0x3089 lma ffffffff88015eb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018f40
=> Loading section .data, size 0x4b0 lma ffffffff88018f58
=> Start address ffffffff88000004
=> Transfer rate: 827336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[348/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp12.exe
Result: invalid
Time: 0:00:00.254955 sp12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14bd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014bd0
=> Loading section .init, size 0x48 lma ffffffff88014c50
=> Loading section .fini, size 0x30 lma ffffffff88014c98
=> Loading section .ctors, size 0x8 lma ffffffff88014cc8
=> Loading section .dtors, size 0x8 lma ffffffff88014cd0
=> Loading section .rdata, size 0x2eb8 lma ffffffff88014ce0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b98
=> Loading section .data, size 0x490 lma ffffffff88017bb0
=> Start address ffffffff88000004
=> Transfer rate: 786880 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[349/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp13.exe
Result: invalid
Time: 0:00:00.264431 sp13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14e10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014e10
=> Loading section .init, size 0x48 lma ffffffff88014e90
=> Loading section .fini, size 0x30 lma ffffffff88014ed8
=> Loading section .ctors, size 0x8 lma ffffffff88014f08
=> Loading section .dtors, size 0x8 lma ffffffff88014f10
=> Loading section .rdata, size 0x2c3d lma ffffffff88014f20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b60
=> Loading section .data, size 0x490 lma ffffffff88017b78
=> Start address ffffffff88000004
=> Transfer rate: 786408 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[350/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp14.exe
Result: invalid
Time: 0:00:00.267133 sp14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11cf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011cf0
=> Loading section .init, size 0x48 lma ffffffff88011d70
=> Loading section .fini, size 0x30 lma ffffffff88011db8
=> Loading section .ctors, size 0x8 lma ffffffff88011de8
=> Loading section .dtors, size 0x8 lma ffffffff88011df0
=> Loading section .rdata, size 0x22a5 lma ffffffff88011e00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140a8
=> Loading section .data, size 0x490 lma ffffffff880140c0
=> Start address ffffffff88000004
=> Transfer rate: 666152 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[351/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp15.exe
Result: invalid
Time: 0:00:00.273236 sp15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880114a0
=> Loading section .init, size 0x48 lma ffffffff88011520
=> Loading section .fini, size 0x30 lma ffffffff88011568
=> Loading section .ctors, size 0x8 lma ffffffff88011598
=> Loading section .dtors, size 0x8 lma ffffffff880115a0
=> Loading section .rdata, size 0x2225 lma ffffffff880115b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137d8
=> Loading section .data, size 0x490 lma ffffffff880137f0
=> Start address ffffffff88000004
=> Transfer rate: 648104 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[352/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:343 W:0 | mipstx39/jmr3904: sp16.exe
Result: invalid
Time: 0:00:00.258901 sp16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14070 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014070
=> Loading section .init, size 0x48 lma ffffffff880140f0
=> Loading section .fini, size 0x30 lma ffffffff88014138
=> Loading section .ctors, size 0x8 lma ffffffff88014168
=> Loading section .dtors, size 0x8 lma ffffffff88014170
=> Loading section .rdata, size 0x2aad lma ffffffff88014180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c30
=> Loading section .data, size 0x490 lma ffffffff88016c48
=> Start address ffffffff88000004
=> Transfer rate: 755304 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[353/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp17.exe
Result: invalid
Time: 0:00:00.275951 sp17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011130
=> Loading section .init, size 0x48 lma ffffffff880111a0
=> Loading section .fini, size 0x30 lma ffffffff880111e8
=> Loading section .ctors, size 0x8 lma ffffffff88011218
=> Loading section .dtors, size 0x8 lma ffffffff88011220
=> Loading section .rdata, size 0x1fc1 lma ffffffff88011230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131f8
=> Loading section .data, size 0x460 lma ffffffff88013210
=> Start address ffffffff88000004
=> Transfer rate: 635656 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[354/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp18.exe
Result: invalid
Time: 0:00:00.268761 sp18.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108c0
=> Loading section .init, size 0x48 lma ffffffff88010930
=> Loading section .fini, size 0x30 lma ffffffff88010978
=> Loading section .ctors, size 0x8 lma ffffffff880109a8
=> Loading section .dtors, size 0x8 lma ffffffff880109b0
=> Loading section .rdata, size 0x1ecd lma ffffffff880109c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012890
=> Loading section .data, size 0x480 lma ffffffff880128a8
=> Start address ffffffff88000004
=> Transfer rate: 616680 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[355/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp19.exe
Result: invalid
Time: 0:00:00.274569 sp19.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1dff0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8801dff0
=> Loading section .init, size 0x48 lma ffffffff8801e060
=> Loading section .fini, size 0x30 lma ffffffff8801e0a8
=> Loading section .ctors, size 0x8 lma ffffffff8801e0d8
=> Loading section .dtors, size 0x8 lma ffffffff8801e0e0
=> Loading section .rdata, size 0x3278 lma ffffffff8801e0f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021368
=> Loading section .data, size 0x798 lma ffffffff88021380
=> Start address ffffffff88000004
=> Transfer rate: 1104000 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[356/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp20.exe
Result: invalid
Time: 0:00:00.276902 sp20.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1a660 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801a660
=> Loading section .init, size 0x48 lma ffffffff8801a6e0
=> Loading section .fini, size 0x30 lma ffffffff8801a728
=> Loading section .ctors, size 0x8 lma ffffffff8801a758
=> Loading section .dtors, size 0x8 lma ffffffff8801a760
=> Loading section .rdata, size 0x26a8 lma ffffffff8801a770
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ce18
=> Loading section .data, size 0x608 lma ffffffff8801ce30
=> Start address ffffffff88000004
=> Transfer rate: 958848 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[357/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp2038.exe
Result: invalid
Time: 0:00:00.276623 sp2038.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b60
=> Loading section .init, size 0x48 lma ffffffff88010bd0
=> Loading section .fini, size 0x30 lma ffffffff88010c18
=> Loading section .ctors, size 0x8 lma ffffffff88010c48
=> Loading section .dtors, size 0x8 lma ffffffff88010c50
=> Loading section .rdata, size 0x1d8d lma ffffffff88010c60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129f0
=> Loading section .data, size 0x488 lma ffffffff88012a08
=> Start address ffffffff88000004
=> Transfer rate: 619560 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[358/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp21.exe
Result: invalid
Time: 0:00:00.274121 sp21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14e20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88014e20
=> Loading section .init, size 0x48 lma ffffffff88014e90
=> Loading section .fini, size 0x30 lma ffffffff88014ed8
=> Loading section .ctors, size 0x8 lma ffffffff88014f08
=> Loading section .dtors, size 0x8 lma ffffffff88014f10
=> Loading section .rdata, size 0x267c lma ffffffff88014f20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880175a0
=> Loading section .data, size 0x4b8 lma ffffffff880175b8
=> Start address ffffffff88000004
=> Transfer rate: 774944 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[359/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp22.exe
Result: invalid
Time: 0:00:00.258209 sp22.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12c90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012c90
=> Loading section .init, size 0x48 lma ffffffff88012d10
=> Loading section .fini, size 0x30 lma ffffffff88012d58
=> Loading section .ctors, size 0x8 lma ffffffff88012d88
=> Loading section .dtors, size 0x8 lma ffffffff88012d90
=> Loading section .rdata, size 0x234c lma ffffffff88012da0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150f0
=> Loading section .data, size 0x4b0 lma ffffffff88015108
=> Start address ffffffff88000004
=> Transfer rate: 699744 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[360/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:351 W:0 | mipstx39/jmr3904: sp23.exe
Result: invalid
Time: 0:00:00.269418 sp23.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010ee0
=> Loading section .init, size 0x48 lma ffffffff88010f60
=> Loading section .fini, size 0x30 lma ffffffff88010fa8
=> Loading section .ctors, size 0x8 lma ffffffff88010fd8
=> Loading section .dtors, size 0x8 lma ffffffff88010fe0
=> Loading section .rdata, size 0x1f65 lma ffffffff88010ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f58
=> Loading section .data, size 0x490 lma ffffffff88012f70
=> Start address ffffffff88000004
=> Transfer rate: 630696 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[361/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp24.exe
Result: invalid
Time: 0:00:00.268125 sp24.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x123b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880123b0
=> Loading section .init, size 0x48 lma ffffffff88012430
=> Loading section .fini, size 0x30 lma ffffffff88012478
=> Loading section .ctors, size 0x8 lma ffffffff880124a8
=> Loading section .dtors, size 0x8 lma ffffffff880124b0
=> Loading section .rdata, size 0x20bc lma ffffffff880124c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014580
=> Loading section .data, size 0x600 lma ffffffff88014598
=> Start address ffffffff88000004
=> Transfer rate: 679008 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[362/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp25.exe
Result: invalid
Time: 0:00:00.272270 sp25.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x122b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880122b0
=> Loading section .init, size 0x48 lma ffffffff88012330
=> Loading section .fini, size 0x30 lma ffffffff88012378
=> Loading section .ctors, size 0x8 lma ffffffff880123a8
=> Loading section .dtors, size 0x8 lma ffffffff880123b0
=> Loading section .rdata, size 0x2341 lma ffffffff880123c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014708
=> Loading section .data, size 0x490 lma ffffffff88014720
=> Start address ffffffff88000004
=> Transfer rate: 679176 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[363/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp26.exe
Result: invalid
Time: 0:00:00.274350 sp26.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d90
=> Loading section .init, size 0x48 lma ffffffff88010e00
=> Loading section .fini, size 0x30 lma ffffffff88010e48
=> Loading section .ctors, size 0x8 lma ffffffff88010e78
=> Loading section .dtors, size 0x8 lma ffffffff88010e80
=> Loading section .rdata, size 0x1e09 lma ffffffff88010e90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ca0
=> Loading section .data, size 0x458 lma ffffffff88012cb8
=> Start address ffffffff88000004
=> Transfer rate: 624648 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[364/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp27.exe
Result: invalid
Time: 0:00:00.282263 sp27.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011650
=> Loading section .init, size 0x48 lma ffffffff880116d0
=> Loading section .fini, size 0x30 lma ffffffff88011718
=> Loading section .ctors, size 0x8 lma ffffffff88011748
=> Loading section .dtors, size 0x8 lma ffffffff88011750
=> Loading section .rdata, size 0x1ea5 lma ffffffff88011760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013608
=> Loading section .data, size 0x490 lma ffffffff88013620
=> Start address ffffffff88000004
=> Transfer rate: 644392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[365/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp27a.exe
Result: invalid
Time: 0:00:00.269656 sp27a.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11650 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011650
=> Loading section .init, size 0x48 lma ffffffff880116d0
=> Loading section .fini, size 0x30 lma ffffffff88011718
=> Loading section .ctors, size 0x8 lma ffffffff88011748
=> Loading section .dtors, size 0x8 lma ffffffff88011750
=> Loading section .rdata, size 0x1eb5 lma ffffffff88011760
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013618
=> Loading section .data, size 0x490 lma ffffffff88013630
=> Start address ffffffff88000004
=> Transfer rate: 644520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[366/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp29.exe
Result: invalid
Time: 0:00:00.268526 sp29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11d90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011d90
=> Loading section .init, size 0x48 lma ffffffff88011e10
=> Loading section .fini, size 0x30 lma ffffffff88011e58
=> Loading section .ctors, size 0x8 lma ffffffff88011e88
=> Loading section .dtors, size 0x8 lma ffffffff88011e90
=> Loading section .rdata, size 0x20dd lma ffffffff88011ea0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f80
=> Loading section .data, size 0x490 lma ffffffff88013f98
=> Start address ffffffff88000004
=> Transfer rate: 663784 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[367/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp30.exe
Result: invalid
Time: 0:00:00.278295 sp30.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ba0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012ba0
=> Loading section .init, size 0x48 lma ffffffff88012c20
=> Loading section .fini, size 0x30 lma ffffffff88012c68
=> Loading section .ctors, size 0x8 lma ffffffff88012c98
=> Loading section .dtors, size 0x8 lma ffffffff88012ca0
=> Loading section .rdata, size 0x21b8 lma ffffffff88012cb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014e68
=> Loading section .data, size 0x600 lma ffffffff88014e80
=> Start address ffffffff88000004
=> Transfer rate: 697280 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[368/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:359 W:0 | mipstx39/jmr3904: sp31.exe
Result: invalid
Time: 0:00:00.276056 sp31.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15090 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015090
=> Loading section .init, size 0x48 lma ffffffff88015110
=> Loading section .fini, size 0x30 lma ffffffff88015158
=> Loading section .ctors, size 0x8 lma ffffffff88015188
=> Loading section .dtors, size 0x8 lma ffffffff88015190
=> Loading section .rdata, size 0x26bc lma ffffffff880151a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017860
=> Loading section .data, size 0x4b0 lma ffffffff88017878
=> Start address ffffffff88000004
=> Transfer rate: 780512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[369/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp32.exe
Result: invalid
Time: 0:00:00.284104 sp32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x113d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880113d0
=> Loading section .init, size 0x48 lma ffffffff88011450
=> Loading section .fini, size 0x30 lma ffffffff88011498
=> Loading section .ctors, size 0x8 lma ffffffff880114c8
=> Loading section .dtors, size 0x8 lma ffffffff880114d0
=> Loading section .rdata, size 0x1e61 lma ffffffff880114e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013348
=> Loading section .data, size 0x490 lma ffffffff88013360
=> Start address ffffffff88000004
=> Transfer rate: 638728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[370/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp33.exe
Result: invalid
Time: 0:00:00.275873 sp33.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11da0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011da0
=> Loading section .init, size 0x48 lma ffffffff88011e20
=> Loading section .fini, size 0x30 lma ffffffff88011e68
=> Loading section .ctors, size 0x8 lma ffffffff88011e98
=> Loading section .dtors, size 0x8 lma ffffffff88011ea0
=> Loading section .rdata, size 0x23f4 lma ffffffff88011eb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142a8
=> Loading section .data, size 0x490 lma ffffffff880142c0
=> Start address ffffffff88000004
=> Transfer rate: 670240 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[371/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp34.exe
Result: invalid
Time: 0:00:00.256331 sp34.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11de0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011de0
=> Loading section .init, size 0x48 lma ffffffff88011e60
=> Loading section .fini, size 0x30 lma ffffffff88011ea8
=> Loading section .ctors, size 0x8 lma ffffffff88011ed8
=> Loading section .dtors, size 0x8 lma ffffffff88011ee0
=> Loading section .rdata, size 0x1f4d lma ffffffff88011ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e40
=> Loading section .data, size 0x490 lma ffffffff88013e58
=> Start address ffffffff88000004
=> Transfer rate: 661224 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[372/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp35.exe
Result: invalid
Time: 0:00:00.272530 sp35.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x183e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880183e0
=> Loading section .init, size 0x48 lma ffffffff88018460
=> Loading section .fini, size 0x30 lma ffffffff880184a8
=> Loading section .ctors, size 0x8 lma ffffffff880184d8
=> Loading section .dtors, size 0x8 lma ffffffff880184e0
=> Loading section .rdata, size 0x27c0 lma ffffffff880184f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801acb0
=> Loading section .data, size 0x5fc lma ffffffff8801acc8
=> Start address ffffffff88000004
=> Transfer rate: 890336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[373/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp37.exe
Result: invalid
Time: 0:00:00.273955 sp37.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x137f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880137f0
=> Loading section .init, size 0x48 lma ffffffff88013870
=> Loading section .fini, size 0x30 lma ffffffff880138b8
=> Loading section .ctors, size 0x8 lma ffffffff880138e8
=> Loading section .dtors, size 0x8 lma ffffffff880138f0
=> Loading section .rdata, size 0x27b1 lma ffffffff88013900
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880160b8
=> Loading section .data, size 0x4b0 lma ffffffff880160d0
=> Start address ffffffff88000004
=> Transfer rate: 732040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[374/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp38.exe
Result: invalid
Time: 0:00:00.271733 sp38.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010f40
=> Loading section .init, size 0x48 lma ffffffff88010fc0
=> Loading section .fini, size 0x30 lma ffffffff88011008
=> Loading section .ctors, size 0x8 lma ffffffff88011038
=> Loading section .dtors, size 0x8 lma ffffffff88011040
=> Loading section .rdata, size 0x1e6d lma ffffffff88011050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ec0
=> Loading section .data, size 0x490 lma ffffffff88012ed8
=> Start address ffffffff88000004
=> Transfer rate: 629480 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[375/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp40.exe
Result: invalid
Time: 0:00:00.275249 sp40.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880110b0
=> Loading section .init, size 0x48 lma ffffffff88011130
=> Loading section .fini, size 0x30 lma ffffffff88011178
=> Loading section .ctors, size 0x8 lma ffffffff880111a8
=> Loading section .dtors, size 0x8 lma ffffffff880111b0
=> Loading section .rdata, size 0x20cd lma ffffffff880111c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013290
=> Loading section .data, size 0x4a8 lma ffffffff880132a8
=> Start address ffffffff88000004
=> Transfer rate: 637480 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[376/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:367 W:0 | mipstx39/jmr3904: sp41.exe
Result: invalid
Time: 0:00:00.268289 sp41.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=> Loading section .init, size 0x48 lma ffffffff88010710
=> Loading section .fini, size 0x30 lma ffffffff88010758
=> Loading section .ctors, size 0x8 lma ffffffff88010788
=> Loading section .dtors, size 0x8 lma ffffffff88010790
=> Loading section .rdata, size 0x1ad5 lma ffffffff880107a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012278
=> Loading section .data, size 0x460 lma ffffffff88012290
=> Start address ffffffff88000004
=> Transfer rate: 603944 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[377/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp42.exe
Result: invalid
Time: 0:00:00.268300 sp42.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ec0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012ec0
=> Loading section .init, size 0x48 lma ffffffff88012f40
=> Loading section .fini, size 0x30 lma ffffffff88012f88
=> Loading section .ctors, size 0x8 lma ffffffff88012fb8
=> Loading section .dtors, size 0x8 lma ffffffff88012fc0
=> Loading section .rdata, size 0x22b8 lma ffffffff88012fd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015288
=> Loading section .data, size 0x5e0 lma ffffffff880152a0
=> Start address ffffffff88000004
=> Transfer rate: 705472 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[378/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp43.exe
Result: invalid
Time: 0:00:00.270649 sp43.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12e40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012e40
=> Loading section .init, size 0x48 lma ffffffff88012ec0
=> Loading section .fini, size 0x30 lma ffffffff88012f08
=> Loading section .ctors, size 0x8 lma ffffffff88012f38
=> Loading section .dtors, size 0x8 lma ffffffff88012f40
=> Loading section .rdata, size 0x2f8c lma ffffffff88012f50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015ee0
=> Loading section .data, size 0x4c0 lma ffffffff88015ef8
=> Start address ffffffff88000004
=> Transfer rate: 728416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[379/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp44.exe
Result: invalid
Time: 0:00:00.271564 sp44.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10df0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010df0
=> Loading section .init, size 0x48 lma ffffffff88010e60
=> Loading section .fini, size 0x30 lma ffffffff88010ea8
=> Loading section .ctors, size 0x8 lma ffffffff88010ed8
=> Loading section .dtors, size 0x8 lma ffffffff88010ee0
=> Loading section .rdata, size 0x1e48 lma ffffffff88010ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d38
=> Loading section .data, size 0x460 lma ffffffff88012d50
=> Start address ffffffff88000004
=> Transfer rate: 625984 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[380/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp45.exe
Result: invalid
Time: 0:00:00.281992 sp45.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011400
=> Loading section .init, size 0x48 lma ffffffff88011480
=> Loading section .fini, size 0x30 lma ffffffff880114c8
=> Loading section .ctors, size 0x8 lma ffffffff880114f8
=> Loading section .dtors, size 0x8 lma ffffffff88011500
=> Loading section .rdata, size 0x1fd5 lma ffffffff88011510
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134e8
=> Loading section .data, size 0x488 lma ffffffff88013500
=> Start address ffffffff88000004
=> Transfer rate: 642024 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[381/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp46.exe
Result: invalid
Time: 0:00:00.274331 sp46.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880114d0
=> Loading section .init, size 0x48 lma ffffffff88011550
=> Loading section .fini, size 0x30 lma ffffffff88011598
=> Loading section .ctors, size 0x8 lma ffffffff880115c8
=> Loading section .dtors, size 0x8 lma ffffffff880115d0
=> Loading section .rdata, size 0x1e85 lma ffffffff880115e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013468
=> Loading section .data, size 0x490 lma ffffffff88013480
=> Start address ffffffff88000004
=> Transfer rate: 641064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[382/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp47.exe
Result: invalid
Time: 0:00:00.271662 sp47.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a40
=> Loading section .init, size 0x48 lma ffffffff88010ab0
=> Loading section .fini, size 0x30 lma ffffffff88010af8
=> Loading section .ctors, size 0x8 lma ffffffff88010b28
=> Loading section .dtors, size 0x8 lma ffffffff88010b30
=> Loading section .rdata, size 0x1a28 lma ffffffff88010b40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012568
=> Loading section .data, size 0x458 lma ffffffff88012580
=> Start address ffffffff88000004
=> Transfer rate: 609920 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[383/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp48.exe
Result: invalid
Time: 0:00:00.267458 sp48.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10830 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010830
=> Loading section .init, size 0x48 lma ffffffff880108a0
=> Loading section .fini, size 0x30 lma ffffffff880108e8
=> Loading section .ctors, size 0x8 lma ffffffff88010918
=> Loading section .dtors, size 0x8 lma ffffffff88010920
=> Loading section .rdata, size 0x1ebc lma ffffffff88010930
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127f0
=> Loading section .data, size 0x480 lma ffffffff88012808
=> Start address ffffffff88000004
=> Transfer rate: 615392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[384/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:375 W:0 | mipstx39/jmr3904: sp49.exe
Result: invalid
Time: 0:00:00.270103 sp49.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffe0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffe0
=> Loading section .init, size 0x48 lma ffffffff88010050
=> Loading section .fini, size 0x30 lma ffffffff88010098
=> Loading section .ctors, size 0x8 lma ffffffff880100c8
=> Loading section .dtors, size 0x8 lma ffffffff880100d0
=> Loading section .rdata, size 0x1e39 lma ffffffff880100e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f20
=> Loading section .data, size 0x480 lma ffffffff88011f38
=> Start address ffffffff88000004
=> Transfer rate: 597320 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[385/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp50.exe
Result: invalid
Time: 0:00:00.258123 sp50.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011360
=> Loading section .init, size 0x48 lma ffffffff880113e0
=> Loading section .fini, size 0x30 lma ffffffff88011428
=> Loading section .ctors, size 0x8 lma ffffffff88011458
=> Loading section .dtors, size 0x8 lma ffffffff88011460
=> Loading section .rdata, size 0x1e21 lma ffffffff88011470
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013298
=> Loading section .data, size 0x490 lma ffffffff880132b0
=> Start address ffffffff88000004
=> Transfer rate: 637320 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[386/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp51.exe
Result: invalid
Time: 0:00:00.275498 sp51.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11180 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011180
=> Loading section .init, size 0x48 lma ffffffff880111f0
=> Loading section .fini, size 0x30 lma ffffffff88011238
=> Loading section .ctors, size 0x8 lma ffffffff88011268
=> Loading section .dtors, size 0x8 lma ffffffff88011270
=> Loading section .rdata, size 0x1f51 lma ffffffff88011280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131d8
=> Loading section .data, size 0x480 lma ffffffff880131f0
=> Start address ffffffff88000004
=> Transfer rate: 635656 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[387/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp52.exe
Result: invalid
Time: 0:00:00.273014 sp52.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ad0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011ad0
=> Loading section .init, size 0x48 lma ffffffff88011b50
=> Loading section .fini, size 0x30 lma ffffffff88011b98
=> Loading section .ctors, size 0x8 lma ffffffff88011bc8
=> Loading section .dtors, size 0x8 lma ffffffff88011bd0
=> Loading section .rdata, size 0x1f61 lma ffffffff88011be0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b48
=> Loading section .data, size 0x4b0 lma ffffffff88013b60
=> Start address ffffffff88000004
=> Transfer rate: 655368 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[388/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp53.exe
Result: invalid
Time: 0:00:00.276380 sp53.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012170
=> Loading section .init, size 0x48 lma ffffffff880121f0
=> Loading section .fini, size 0x30 lma ffffffff88012238
=> Loading section .ctors, size 0x8 lma ffffffff88012268
=> Loading section .dtors, size 0x8 lma ffffffff88012270
=> Loading section .rdata, size 0x1f89 lma ffffffff88012280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014210
=> Loading section .data, size 0x4b0 lma ffffffff88014228
=> Start address ffffffff88000004
=> Transfer rate: 669256 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[389/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp54.exe
Result: invalid
Time: 0:00:00.275089 sp54.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf700 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f700
=> Loading section .init, size 0x48 lma ffffffff8800f770
=> Loading section .fini, size 0x30 lma ffffffff8800f7b8
=> Loading section .ctors, size 0x8 lma ffffffff8800f7e8
=> Loading section .dtors, size 0x8 lma ffffffff8800f7f0
=> Loading section .rdata, size 0x1e44 lma ffffffff8800f800
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011648
=> Loading section .data, size 0x590 lma ffffffff88011660
=> Start address ffffffff88000004
=> Transfer rate: 581408 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[390/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp55.exe
Result: invalid
Time: 0:00:00.268454 sp55.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10870 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010870
=> Loading section .init, size 0x48 lma ffffffff880108e0
=> Loading section .fini, size 0x30 lma ffffffff88010928
=> Loading section .ctors, size 0x8 lma ffffffff88010958
=> Loading section .dtors, size 0x8 lma ffffffff88010960
=> Loading section .rdata, size 0x1f19 lma ffffffff88010970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012890
=> Loading section .data, size 0x480 lma ffffffff880128a8
=> Start address ffffffff88000004
=> Transfer rate: 616648 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[391/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp56.exe
Result: invalid
Time: 0:00:00.267139 sp56.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfde0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fde0
=> Loading section .init, size 0x48 lma ffffffff8800fe50
=> Loading section .fini, size 0x30 lma ffffffff8800fe98
=> Loading section .ctors, size 0x8 lma ffffffff8800fec8
=> Loading section .dtors, size 0x8 lma ffffffff8800fed0
=> Loading section .rdata, size 0x1e61 lma ffffffff8800fee0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d48
=> Loading section .data, size 0x4a0 lma ffffffff88011d60
=> Start address ffffffff88000004
=> Transfer rate: 593800 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[392/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:383 W:0 | mipstx39/jmr3904: sp57.exe
Result: invalid
Time: 0:00:00.259042 sp57.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c40
=> Loading section .init, size 0x48 lma ffffffff88010cb0
=> Loading section .fini, size 0x30 lma ffffffff88010cf8
=> Loading section .ctors, size 0x8 lma ffffffff88010d28
=> Loading section .dtors, size 0x8 lma ffffffff88010d30
=> Loading section .rdata, size 0x1f05 lma ffffffff88010d40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c48
=> Loading section .data, size 0x460 lma ffffffff88012c60
=> Start address ffffffff88000004
=> Transfer rate: 624040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[393/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp58.exe
Result: invalid
Time: 0:00:00.275229 sp58.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfb60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fb60
=> Loading section .init, size 0x48 lma ffffffff8800fbd0
=> Loading section .fini, size 0x30 lma ffffffff8800fc18
=> Loading section .ctors, size 0x8 lma ffffffff8800fc48
=> Loading section .dtors, size 0x8 lma ffffffff8800fc50
=> Loading section .rdata, size 0x1a59 lma ffffffff8800fc60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116c0
=> Loading section .data, size 0x448 lma ffffffff880116d8
=> Start address ffffffff88000004
=> Transfer rate: 579720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[394/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp59.exe
Result: invalid
Time: 0:00:00.261183 sp59.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x113b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880113b0
=> Loading section .init, size 0x48 lma ffffffff88011430
=> Loading section .fini, size 0x30 lma ffffffff88011478
=> Loading section .ctors, size 0x8 lma ffffffff880114a8
=> Loading section .dtors, size 0x8 lma ffffffff880114b0
=> Loading section .rdata, size 0x204d lma ffffffff880114c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013510
=> Loading section .data, size 0x490 lma ffffffff88013528
=> Start address ffffffff88000004
=> Transfer rate: 642408 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[395/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp60.exe
Result: invalid
Time: 0:00:00.273067 sp60.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11150 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011150
=> Loading section .init, size 0x48 lma ffffffff880111d0
=> Loading section .fini, size 0x30 lma ffffffff88011218
=> Loading section .ctors, size 0x8 lma ffffffff88011248
=> Loading section .dtors, size 0x8 lma ffffffff88011250
=> Loading section .rdata, size 0x1f45 lma ffffffff88011260
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131a8
=> Loading section .data, size 0x490 lma ffffffff880131c0
=> Start address ffffffff88000004
=> Transfer rate: 635432 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[396/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp62.exe
Result: invalid
Time: 0:00:00.276811 sp62.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12000 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012000
=> Loading section .init, size 0x48 lma ffffffff88012080
=> Loading section .fini, size 0x30 lma ffffffff880120c8
=> Loading section .ctors, size 0x8 lma ffffffff880120f8
=> Loading section .dtors, size 0x8 lma ffffffff88012100
=> Loading section .rdata, size 0x2044 lma ffffffff88012110
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014158
=> Loading section .data, size 0x49c lma ffffffff88014170
=> Start address ffffffff88000004
=> Transfer rate: 667648 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[397/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp63.exe
Result: invalid
Time: 0:00:00.263071 sp63.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd80
=> Loading section .init, size 0x48 lma ffffffff8800fdf0
=> Loading section .fini, size 0x30 lma ffffffff8800fe38
=> Loading section .ctors, size 0x8 lma ffffffff8800fe68
=> Loading section .dtors, size 0x8 lma ffffffff8800fe70
=> Loading section .rdata, size 0x1b19 lma ffffffff8800fe80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119a0
=> Loading section .data, size 0x448 lma ffffffff880119b8
=> Start address ffffffff88000004
=> Transfer rate: 585608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[398/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp64.exe
Result: invalid
Time: 0:00:00.269871 sp64.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d10
=> Loading section .init, size 0x48 lma ffffffff88010d80
=> Loading section .fini, size 0x30 lma ffffffff88010dc8
=> Loading section .ctors, size 0x8 lma ffffffff88010df8
=> Loading section .dtors, size 0x8 lma ffffffff88010e00
=> Loading section .rdata, size 0x1b4d lma ffffffff88010e10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012960
=> Loading section .data, size 0x4b0 lma ffffffff88012978
=> Start address ffffffff88000004
=> Transfer rate: 618728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[399/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp65.exe
Result: invalid
Time: 0:00:00.276872 sp65.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12770 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012770
=> Loading section .init, size 0x48 lma ffffffff880127f0
=> Loading section .fini, size 0x30 lma ffffffff88012838
=> Loading section .ctors, size 0x8 lma ffffffff88012868
=> Loading section .dtors, size 0x8 lma ffffffff88012870
=> Loading section .rdata, size 0x1f1c lma ffffffff88012880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880147a0
=> Loading section .data, size 0x49c lma ffffffff880147b8
=> Start address ffffffff88000004
=> Transfer rate: 680512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[400/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:391 W:0 | mipstx39/jmr3904: sp66.exe
Result: invalid
Time: 0:00:00.272375 sp66.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12770 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012770
=> Loading section .init, size 0x48 lma ffffffff880127f0
=> Loading section .fini, size 0x30 lma ffffffff88012838
=> Loading section .ctors, size 0x8 lma ffffffff88012868
=> Loading section .dtors, size 0x8 lma ffffffff88012870
=> Loading section .rdata, size 0x1f24 lma ffffffff88012880
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880147a8
=> Loading section .data, size 0x49c lma ffffffff880147c0
=> Start address ffffffff88000004
=> Transfer rate: 680576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[401/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp67.exe
Result: invalid
Time: 0:00:00.267570 sp67.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x111b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880111b0
=> Loading section .init, size 0x48 lma ffffffff88011230
=> Loading section .fini, size 0x30 lma ffffffff88011278
=> Loading section .ctors, size 0x8 lma ffffffff880112a8
=> Loading section .dtors, size 0x8 lma ffffffff880112b0
=> Loading section .rdata, size 0x1ef5 lma ffffffff880112c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131b8
=> Loading section .data, size 0x490 lma ffffffff880131d0
=> Start address ffffffff88000004
=> Transfer rate: 635560 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[402/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp68.exe
Result: invalid
Time: 0:00:00.271483 sp68.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x144a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff880144a0
=> Loading section .init, size 0x48 lma ffffffff88014530
=> Loading section .fini, size 0x30 lma ffffffff88014578
=> Loading section .ctors, size 0x8 lma ffffffff880145a8
=> Loading section .dtors, size 0x8 lma ffffffff880145b0
=> Loading section .rdata, size 0x22a9 lma ffffffff880145c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016870
=> Loading section .data, size 0x550 lma ffffffff88016888
=> Start address ffffffff88000004
=> Transfer rate: 749128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[403/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp69.exe
Result: invalid
Time: 0:00:00.264240 sp69.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ae0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011ae0
=> Loading section .init, size 0x48 lma ffffffff88011b60
=> Loading section .fini, size 0x30 lma ffffffff88011ba8
=> Loading section .ctors, size 0x8 lma ffffffff88011bd8
=> Loading section .dtors, size 0x8 lma ffffffff88011be0
=> Loading section .rdata, size 0x228d lma ffffffff88011bf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e80
=> Loading section .data, size 0x490 lma ffffffff88013e98
=> Start address ffffffff88000004
=> Transfer rate: 661736 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[404/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp70.exe
Result: invalid
Time: 0:00:00.270606 sp70.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11210 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011210
=> Loading section .init, size 0x48 lma ffffffff88011280
=> Loading section .fini, size 0x30 lma ffffffff880112c8
=> Loading section .ctors, size 0x8 lma ffffffff880112f8
=> Loading section .dtors, size 0x8 lma ffffffff88011300
=> Loading section .rdata, size 0x1df4 lma ffffffff88011310
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013108
=> Loading section .data, size 0x460 lma ffffffff88013120
=> Start address ffffffff88000004
=> Transfer rate: 633760 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[405/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp71.exe
Result: invalid
Time: 0:00:00.272263 sp71.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10070 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010070
=> Loading section .init, size 0x48 lma ffffffff880100e0
=> Loading section .fini, size 0x30 lma ffffffff88010128
=> Loading section .ctors, size 0x8 lma ffffffff88010158
=> Loading section .dtors, size 0x8 lma ffffffff88010160
=> Loading section .rdata, size 0x1e04 lma ffffffff88010170
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f78
=> Loading section .data, size 0x480 lma ffffffff88011f90
=> Start address ffffffff88000004
=> Transfer rate: 598048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[406/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp72.exe
Result: invalid
Time: 0:00:00.266494 sp72.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x117d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880117d0
=> Loading section .init, size 0x48 lma ffffffff88011850
=> Loading section .fini, size 0x30 lma ffffffff88011898
=> Loading section .ctors, size 0x8 lma ffffffff880118c8
=> Loading section .dtors, size 0x8 lma ffffffff880118d0
=> Loading section .rdata, size 0x1ec5 lma ffffffff880118e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137a8
=> Loading section .data, size 0x490 lma ffffffff880137c0
=> Start address ffffffff88000004
=> Transfer rate: 647720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[407/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp73.exe
Result: invalid
Time: 0:00:00.276673 sp73.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011b30
=> Loading section .init, size 0x48 lma ffffffff88011ba0
=> Loading section .fini, size 0x30 lma ffffffff88011be8
=> Loading section .ctors, size 0x8 lma ffffffff88011c18
=> Loading section .dtors, size 0x8 lma ffffffff88011c20
=> Loading section .rdata, size 0x1ff4 lma ffffffff88011c30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c28
=> Loading section .data, size 0x480 lma ffffffff88013c40
=> Start address ffffffff88000004
=> Transfer rate: 656800 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[408/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:399 W:0 | mipstx39/jmr3904: sp74.exe
Result: invalid
Time: 0:00:00.277222 sp74.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfad0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fad0
=> Loading section .init, size 0x48 lma ffffffff8800fb40
=> Loading section .fini, size 0x30 lma ffffffff8800fb88
=> Loading section .ctors, size 0x8 lma ffffffff8800fbb8
=> Loading section .dtors, size 0x8 lma ffffffff8800fbc0
=> Loading section .rdata, size 0x1e31 lma ffffffff8800fbd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a08
=> Loading section .data, size 0x450 lma ffffffff88011a20
=> Start address ffffffff88000004
=> Transfer rate: 586504 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[409/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: sp75.exe
Result: invalid
Time: 0:00:00.272245 sp75.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ff0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010ff0
=> Loading section .init, size 0x48 lma ffffffff88011070
=> Loading section .fini, size 0x30 lma ffffffff880110b8
=> Loading section .ctors, size 0x8 lma ffffffff880110e8
=> Loading section .dtors, size 0x8 lma ffffffff880110f0
=> Loading section .rdata, size 0x1e1d lma ffffffff88011100
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f20
=> Loading section .data, size 0x490 lma ffffffff88012f38
=> Start address ffffffff88000004
=> Transfer rate: 630248 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[410/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: sp76.exe
Result: invalid
Time: 0:00:00.268455 sp76.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10400 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=> Loading section .init, size 0x48 lma ffffffff88010470
=> Loading section .fini, size 0x30 lma ffffffff880104b8
=> Loading section .ctors, size 0x8 lma ffffffff880104e8
=> Loading section .dtors, size 0x8 lma ffffffff880104f0
=> Loading section .rdata, size 0x1fe8 lma ffffffff88010500
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e8
=> Loading section .data, size 0x450 lma ffffffff88012500
=> Start address ffffffff88000004
=> Transfer rate: 608832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[411/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: sp77.exe
Result: invalid
Time: 0:00:00.276054 sp77.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010960
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1d19 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012790
=> Loading section .data, size 0x488 lma ffffffff880127a8
=> Start address ffffffff88000004
=> Transfer rate: 614664 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[412/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: spassoc01.exe
Result: invalid
Time: 0:00:00.267177 spassoc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011510
=> Loading section .init, size 0x48 lma ffffffff88011580
=> Loading section .fini, size 0x30 lma ffffffff880115c8
=> Loading section .ctors, size 0x8 lma ffffffff880115f8
=> Loading section .dtors, size 0x8 lma ffffffff88011600
=> Loading section .rdata, size 0x21c9 lma ffffffff88011610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137e0
=> Loading section .data, size 0x480 lma ffffffff880137f8
=> Start address ffffffff88000004
=> Transfer rate: 648008 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[413/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: spatomic01.exe
Result: invalid
Time: 0:00:00.260405 spatomic01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x104c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880104c0
=> Loading section .init, size 0x48 lma ffffffff88010530
=> Loading section .fini, size 0x30 lma ffffffff88010578
=> Loading section .ctors, size 0x8 lma ffffffff880105a8
=> Loading section .dtors, size 0x8 lma ffffffff880105b0
=> Loading section .rdata, size 0x1d25 lma ffffffff880105c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e8
=> Loading section .data, size 0x450 lma ffffffff88012300
=> Start address ffffffff88000004
=> Transfer rate: 604712 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[414/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: spcache01.exe
Result: invalid
Time: 0:00:00.268565 spcache01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x128f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880128f0
=> Loading section .init, size 0x48 lma ffffffff88012970
=> Loading section .fini, size 0x30 lma ffffffff880129b8
=> Loading section .ctors, size 0x8 lma ffffffff880129e8
=> Loading section .dtors, size 0x8 lma ffffffff880129f0
=> Loading section .rdata, size 0x2165 lma ffffffff88012a00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014b68
=> Loading section .data, size 0x458 lma ffffffff88014b80
=> Start address ffffffff88000004
=> Transfer rate: 687720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[415/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: spcbssched01.exe
Result: invalid
Time: 0:00:00.274534 spcbssched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12070 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012070
=> Loading section .init, size 0x48 lma ffffffff880120e0
=> Loading section .fini, size 0x30 lma ffffffff88012128
=> Loading section .ctors, size 0x8 lma ffffffff88012158
=> Loading section .dtors, size 0x8 lma ffffffff88012160
=> Loading section .rdata, size 0x20c8 lma ffffffff88012170
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014238
=> Loading section .data, size 0x600 lma ffffffff88014250
=> Start address ffffffff88000004
=> Transfer rate: 672320 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[416/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:407 W:0 | mipstx39/jmr3904: spcbssched02.exe
Result: invalid
Time: 0:00:00.276865 spcbssched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13a60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013a60
=> Loading section .init, size 0x48 lma ffffffff88013ae0
=> Loading section .fini, size 0x30 lma ffffffff88013b28
=> Loading section .ctors, size 0x8 lma ffffffff88013b58
=> Loading section .dtors, size 0x8 lma ffffffff88013b60
=> Loading section .rdata, size 0x26ac lma ffffffff88013b70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016220
=> Loading section .data, size 0x490 lma ffffffff88016238
=> Start address ffffffff88000004
=> Transfer rate: 734688 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[417/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spcbssched03.exe
Result: invalid
Time: 0:00:00.271250 spcbssched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13500 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013500
=> Loading section .init, size 0x48 lma ffffffff88013580
=> Loading section .fini, size 0x30 lma ffffffff880135c8
=> Loading section .ctors, size 0x8 lma ffffffff880135f8
=> Loading section .dtors, size 0x8 lma ffffffff88013600
=> Loading section .rdata, size 0x21f8 lma ffffffff88013610
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015808
=> Loading section .data, size 0x4f8 lma ffffffff88015820
=> Start address ffffffff88000004
=> Transfer rate: 714880 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[418/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spchain.exe
Result: invalid
Time: 0:00:00.273624 spchain.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11e00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011e00
=> Loading section .init, size 0x48 lma ffffffff88011e70
=> Loading section .fini, size 0x30 lma ffffffff88011eb8
=> Loading section .ctors, size 0x8 lma ffffffff88011ee8
=> Loading section .dtors, size 0x8 lma ffffffff88011ef0
=> Loading section .rdata, size 0x2165 lma ffffffff88011f00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014068
=> Loading section .data, size 0x478 lma ffffffff88014080
=> Start address ffffffff88000004
=> Transfer rate: 665448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[419/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spclock_err01.exe
Result: invalid
Time: 0:00:00.260583 spclock_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x123d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880123d0
=> Loading section .init, size 0x48 lma ffffffff88012440
=> Loading section .fini, size 0x30 lma ffffffff88012488
=> Loading section .ctors, size 0x8 lma ffffffff880124b8
=> Loading section .dtors, size 0x8 lma ffffffff880124c0
=> Loading section .rdata, size 0x244d lma ffffffff880124d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014920
=> Loading section .data, size 0x480 lma ffffffff88014938
=> Start address ffffffff88000004
=> Transfer rate: 683368 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[420/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spclock_err02.exe
Result: invalid
Time: 0:00:00.269818 spclock_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011ef0
=> Loading section .init, size 0x48 lma ffffffff88011f60
=> Loading section .fini, size 0x30 lma ffffffff88011fa8
=> Loading section .ctors, size 0x8 lma ffffffff88011fd8
=> Loading section .dtors, size 0x8 lma ffffffff88011fe0
=> Loading section .rdata, size 0x20d9 lma ffffffff88011ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140d0
=> Loading section .data, size 0x480 lma ffffffff880140e8
=> Start address ffffffff88000004
=> Transfer rate: 666312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[421/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid
Time: 0:00:00.259077 spclock_todhook01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16380 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88016380
=> Loading section .init, size 0x48 lma ffffffff880163f0
=> Loading section .fini, size 0x30 lma ffffffff88016438
=> Loading section .ctors, size 0x8 lma ffffffff88016468
=> Loading section .dtors, size 0x8 lma ffffffff88016470
=> Loading section .rdata, size 0x2628 lma ffffffff88016480
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018aa8
=> Loading section .data, size 0x7e0 lma ffffffff88018ac0
=> Start address ffffffff88000004
=> Transfer rate: 824512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[422/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spconfig01.exe
Result: invalid
Time: 0:00:00.275121 spconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf6e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f6e0
=> Loading section .init, size 0x48 lma ffffffff8800f750
=> Loading section .fini, size 0x30 lma ffffffff8800f798
=> Loading section .ctors, size 0x8 lma ffffffff8800f7c8
=> Loading section .dtors, size 0x8 lma ffffffff8800f7d0
=> Loading section .rdata, size 0x1a29 lma ffffffff8800f7e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011210
=> Loading section .data, size 0x4dc lma ffffffff88011228
=> Start address ffffffff88000004
=> Transfer rate: 571304 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[423/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spconfig02.exe
Result: invalid
Time: 0:00:00.275926 spconfig02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xca40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff8800ca40
=> Loading section .init, size 0x48 lma ffffffff8800cad0
=> Loading section .fini, size 0x30 lma ffffffff8800cb18
=> Loading section .ctors, size 0x8 lma ffffffff8800cb48
=> Loading section .dtors, size 0x8 lma ffffffff8800cb50
=> Loading section .rdata, size 0x15c4 lma ffffffff8800cb60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e128
=> Loading section .data, size 0x340 lma ffffffff8800e140
=> Start address ffffffff88000004
=> Transfer rate: 467872 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[424/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:415 W:0 | mipstx39/jmr3904: spconsole01.exe
Result: invalid
Time: 0:00:00.276485 spconsole01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1ec90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8801ec90
=> Loading section .init, size 0x48 lma ffffffff8801ed10
=> Loading section .fini, size 0x30 lma ffffffff8801ed58
=> Loading section .ctors, size 0x8 lma ffffffff8801ed88
=> Loading section .dtors, size 0x8 lma ffffffff8801ed90
=> Loading section .rdata, size 0x2424 lma ffffffff8801eda0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880211c8
=> Loading section .data, size 0x624 lma ffffffff880211e0
=> Start address ffffffff88000004
=> Transfer rate: 1097664 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[425/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spcontext01.exe
Result: invalid
Time: 0:00:00.276632 spcontext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011900
=> Loading section .init, size 0x48 lma ffffffff88011980
=> Loading section .fini, size 0x30 lma ffffffff880119c8
=> Loading section .ctors, size 0x8 lma ffffffff880119f8
=> Loading section .dtors, size 0x8 lma ffffffff88011a00
=> Loading section .rdata, size 0x1a5d lma ffffffff88011a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013470
=> Loading section .data, size 0x490 lma ffffffff88013488
=> Start address ffffffff88000004
=> Transfer rate: 641128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[426/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid
Time: 0:00:00.270278 spcpucounter01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88019170
=> Loading section .init, size 0x48 lma ffffffff880191f0
=> Loading section .fini, size 0x30 lma ffffffff88019238
=> Loading section .ctors, size 0x8 lma ffffffff88019268
=> Loading section .dtors, size 0x8 lma ffffffff88019270
=> Loading section .rdata, size 0x22b8 lma ffffffff88019280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b538
=> Loading section .data, size 0x5f0 lma ffffffff8801b550
=> Start address ffffffff88000004
=> Transfer rate: 907712 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[427/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spcpuset01.exe
Result: invalid
Time: 0:00:00.272251 spcpuset01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10040 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010040
=> Loading section .init, size 0x48 lma ffffffff880100b0
=> Loading section .fini, size 0x30 lma ffffffff880100f8
=> Loading section .ctors, size 0x8 lma ffffffff88010128
=> Loading section .dtors, size 0x8 lma ffffffff88010130
=> Loading section .rdata, size 0x1b80 lma ffffffff88010140
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cc0
=> Loading section .data, size 0x448 lma ffffffff88011cd8
=> Start address ffffffff88000004
=> Transfer rate: 592064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[428/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spcxx01.exe
Result: invalid
Time: 0:00:00.258145 spcxx01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x32510 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88032510
=> Loading section .init, size 0x48 lma ffffffff88032590
=> Loading section .fini, size 0x30 lma ffffffff880325d8
=> Loading section .ctors, size 0x24 lma ffffffff88032608
=> Loading section .dtors, size 0x8 lma ffffffff8803262c
=> Loading section .rdata, size 0x544c lma ffffffff88032640
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88037a90
=> Loading section .rel.dyn, size 0x20 lma ffffffff88037aa8
=> Loading section .data, size 0x6f8 lma ffffffff88037ac8
=> Loading section .sdata, size 0x4 lma ffffffff880381c0
=> Start address ffffffff88000004
=> Transfer rate: 1838496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[429/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spedfsched01.exe
Result: invalid
Time: 0:00:00.259783 spedfsched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011ee0
=> Loading section .init, size 0x48 lma ffffffff88011f50
=> Loading section .fini, size 0x30 lma ffffffff88011f98
=> Loading section .ctors, size 0x8 lma ffffffff88011fc8
=> Loading section .dtors, size 0x8 lma ffffffff88011fd0
=> Loading section .rdata, size 0x20c8 lma ffffffff88011fe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140a8
=> Loading section .data, size 0x600 lma ffffffff880140c0
=> Start address ffffffff88000004
=> Transfer rate: 669120 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[430/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spedfsched02.exe
Result: invalid
Time: 0:00:00.266241 spedfsched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13170 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013170
=> Loading section .init, size 0x48 lma ffffffff880131f0
=> Loading section .fini, size 0x30 lma ffffffff88013238
=> Loading section .ctors, size 0x8 lma ffffffff88013268
=> Loading section .dtors, size 0x8 lma ffffffff88013270
=> Loading section .rdata, size 0x21b4 lma ffffffff88013280
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015438
=> Loading section .data, size 0x4e0 lma ffffffff88015450
=> Start address ffffffff88000004
=> Transfer rate: 706848 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[431/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spedfsched03.exe
Result: invalid
Time: 0:00:00.277236 spedfsched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12b90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012b90
=> Loading section .init, size 0x48 lma ffffffff88012c10
=> Loading section .fini, size 0x30 lma ffffffff88012c58
=> Loading section .ctors, size 0x8 lma ffffffff88012c88
=> Loading section .dtors, size 0x8 lma ffffffff88012c90
=> Loading section .rdata, size 0x20e0 lma ffffffff88012ca0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d80
=> Loading section .data, size 0x4f8 lma ffffffff88014d98
=> Start address ffffffff88000004
=> Transfer rate: 693312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[432/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:423 W:0 | mipstx39/jmr3904: spedfsched04.exe
Result: invalid
Time: 0:00:00.274778 spedfsched04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11c70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011c70
=> Loading section .init, size 0x48 lma ffffffff88011cf0
=> Loading section .fini, size 0x30 lma ffffffff88011d38
=> Loading section .ctors, size 0x8 lma ffffffff88011d68
=> Loading section .dtors, size 0x8 lma ffffffff88011d70
=> Loading section .rdata, size 0x1f75 lma ffffffff88011d80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013cf8
=> Loading section .data, size 0x490 lma ffffffff88013d10
=> Start address ffffffff88000004
=> Transfer rate: 658600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[433/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: sperror01.exe
Result: invalid
Time: 0:00:00.270172 sperror01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19c00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88019c00
=> Loading section .init, size 0x48 lma ffffffff88019c80
=> Loading section .fini, size 0x30 lma ffffffff88019cc8
=> Loading section .ctors, size 0x8 lma ffffffff88019cf8
=> Loading section .dtors, size 0x8 lma ffffffff88019d00
=> Loading section .rdata, size 0x2f1c lma ffffffff88019d10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cc30
=> Loading section .data, size 0x5d4 lma ffffffff8801cc48
=> Start address ffffffff88000004
=> Transfer rate: 954496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[434/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: sperror02.exe
Result: invalid
Time: 0:00:00.270627 sperror02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19b80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88019b80
=> Loading section .init, size 0x48 lma ffffffff88019c00
=> Loading section .fini, size 0x30 lma ffffffff88019c48
=> Loading section .ctors, size 0x8 lma ffffffff88019c78
=> Loading section .dtors, size 0x8 lma ffffffff88019c80
=> Loading section .rdata, size 0x2e9c lma ffffffff88019c90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cb30
=> Loading section .data, size 0x5d4 lma ffffffff8801cb48
=> Start address ffffffff88000004
=> Transfer rate: 952448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[435/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: sperror03.exe
Result: invalid
Time: 0:00:00.276453 sperror03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103d0
=> Loading section .init, size 0x48 lma ffffffff88010440
=> Loading section .fini, size 0x30 lma ffffffff88010488
=> Loading section .ctors, size 0x8 lma ffffffff880104b8
=> Loading section .dtors, size 0x8 lma ffffffff880104c0
=> Loading section .rdata, size 0x19d1 lma ffffffff880104d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ea8
=> Loading section .data, size 0x458 lma ffffffff88011ec0
=> Start address ffffffff88000004
=> Transfer rate: 596040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[436/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: spevent_err03.exe
Result: invalid
Time: 0:00:00.274471 spevent_err03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17d70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017d70
=> Loading section .init, size 0x48 lma ffffffff88017de0
=> Loading section .fini, size 0x30 lma ffffffff88017e28
=> Loading section .ctors, size 0x8 lma ffffffff88017e58
=> Loading section .dtors, size 0x8 lma ffffffff88017e60
=> Loading section .rdata, size 0x2934 lma ffffffff88017e70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a7a8
=> Loading section .data, size 0x650 lma ffffffff8801a7c0
=> Start address ffffffff88000004
=> Transfer rate: 880672 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[437/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: speventsystem01.exe
Result: invalid
Time: 0:00:00.268921 speventsystem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c00
=> Loading section .init, size 0x48 lma ffffffff88010c70
=> Loading section .fini, size 0x30 lma ffffffff88010cb8
=> Loading section .ctors, size 0x8 lma ffffffff88010ce8
=> Loading section .dtors, size 0x8 lma ffffffff88010cf0
=> Loading section .rdata, size 0x1a79 lma ffffffff88010d00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012780
=> Loading section .data, size 0x458 lma ffffffff88012798
=> Start address ffffffff88000004
=> Transfer rate: 614152 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[438/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: speventtransient01.exe
Result: invalid
Time: 0:00:00.264944 speventtransient01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b10
=> Loading section .init, size 0x48 lma ffffffff88010b80
=> Loading section .fini, size 0x30 lma ffffffff88010bc8
=> Loading section .ctors, size 0x8 lma ffffffff88010bf8
=> Loading section .dtors, size 0x8 lma ffffffff88010c00
=> Loading section .rdata, size 0x1a3d lma ffffffff88010c10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012650
=> Loading section .data, size 0x458 lma ffffffff88012668
=> Start address ffffffff88000004
=> Transfer rate: 611752 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[439/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: spextensions01.exe
Result: invalid
Time: 0:00:00.274555 spextensions01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12420 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012420
=> Loading section .init, size 0x48 lma ffffffff880124a0
=> Loading section .fini, size 0x30 lma ffffffff880124e8
=> Loading section .ctors, size 0x8 lma ffffffff88012518
=> Loading section .dtors, size 0x8 lma ffffffff88012520
=> Loading section .rdata, size 0x1d70 lma ffffffff88012530
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142a0
=> Loading section .data, size 0x490 lma ffffffff880142b8
=> Start address ffffffff88000004
=> Transfer rate: 670208 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[440/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:431 W:0 | mipstx39/jmr3904: spfatal01.exe
Result: invalid
Time: 0:00:00.267454 spfatal01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010520
=> Loading section .init, size 0x48 lma ffffffff88010590
=> Loading section .fini, size 0x30 lma ffffffff880105d8
=> Loading section .ctors, size 0x8 lma ffffffff88010608
=> Loading section .dtors, size 0x8 lma ffffffff88010610
=> Loading section .rdata, size 0x1dec lma ffffffff88010620
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012410
=> Loading section .data, size 0x458 lma ffffffff88012428
=> Start address ffffffff88000004
=> Transfer rate: 607136 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[441/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal03.exe
Result: invalid
Time: 0:00:00.276261 spfatal03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x111d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880111d0
=> Loading section .init, size 0x48 lma ffffffff88011250
=> Loading section .fini, size 0x30 lma ffffffff88011298
=> Loading section .ctors, size 0x8 lma ffffffff880112c8
=> Loading section .dtors, size 0x8 lma ffffffff880112d0
=> Loading section .rdata, size 0x1f69 lma ffffffff880112e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013250
=> Loading section .data, size 0x490 lma ffffffff88013268
=> Start address ffffffff88000004
=> Transfer rate: 636744 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[442/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal04.exe
Result: invalid
Time: 0:00:00.275677 spfatal04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105c0
=> Loading section .init, size 0x48 lma ffffffff88010630
=> Loading section .fini, size 0x30 lma ffffffff88010678
=> Loading section .ctors, size 0x8 lma ffffffff880106a8
=> Loading section .dtors, size 0x8 lma ffffffff880106b0
=> Loading section .rdata, size 0x1de1 lma ffffffff880106c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124a8
=> Loading section .data, size 0x458 lma ffffffff880124c0
=> Start address ffffffff88000004
=> Transfer rate: 608328 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[443/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal05.exe
Result: invalid
Time: 0:00:00.266749 spfatal05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108b0
=> Loading section .init, size 0x48 lma ffffffff88010920
=> Loading section .fini, size 0x30 lma ffffffff88010968
=> Loading section .ctors, size 0x8 lma ffffffff88010998
=> Loading section .dtors, size 0x8 lma ffffffff880109a0
=> Loading section .rdata, size 0x1f21 lma ffffffff880109b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d8
=> Loading section .data, size 0x460 lma ffffffff880128f0
=> Start address ffffffff88000004
=> Transfer rate: 616968 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[444/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal09.exe
Result: invalid
Time: 0:00:00.264916 spfatal09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010710
=> Loading section .fini, size 0x30 lma ffffffff88010758
=> Loading section .ctors, size 0x8 lma ffffffff88010788
=> Loading section .dtors, size 0x8 lma ffffffff88010790
=> Loading section .rdata, size 0x1df1 lma ffffffff880107a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012598
=> Loading section .data, size 0x458 lma ffffffff880125b0
=> Start address ffffffff88000004
=> Transfer rate: 610248 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[445/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal10.exe
Result: invalid
Time: 0:00:00.270351 spfatal10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10560 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010560
=> Loading section .init, size 0x48 lma ffffffff880105d0
=> Loading section .fini, size 0x30 lma ffffffff88010618
=> Loading section .ctors, size 0x8 lma ffffffff88010648
=> Loading section .dtors, size 0x8 lma ffffffff88010650
=> Loading section .rdata, size 0x1add lma ffffffff88010660
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012140
=> Loading section .data, size 0x458 lma ffffffff88012158
=> Start address ffffffff88000004
=> Transfer rate: 601384 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[446/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal11.exe
Result: invalid
Time: 0:00:00.271324 spfatal11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10550 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010550
=> Loading section .init, size 0x48 lma ffffffff880105c0
=> Loading section .fini, size 0x30 lma ffffffff88010608
=> Loading section .ctors, size 0x8 lma ffffffff88010638
=> Loading section .dtors, size 0x8 lma ffffffff88010640
=> Loading section .rdata, size 0x1acd lma ffffffff88010650
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012120
=> Loading section .data, size 0x458 lma ffffffff88012138
=> Start address ffffffff88000004
=> Transfer rate: 601128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[447/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal12.exe
Result: invalid
Time: 0:00:00.276733 spfatal12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010710
=> Loading section .fini, size 0x30 lma ffffffff88010758
=> Loading section .ctors, size 0x8 lma ffffffff88010788
=> Loading section .dtors, size 0x8 lma ffffffff88010790
=> Loading section .rdata, size 0x1e09 lma ffffffff880107a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125b0
=> Loading section .data, size 0x458 lma ffffffff880125c8
=> Start address ffffffff88000004
=> Transfer rate: 610440 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[448/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:439 W:0 | mipstx39/jmr3904: spfatal14.exe
Result: invalid
Time: 0:00:00.262822 spfatal14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10640 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010640
=> Loading section .init, size 0x48 lma ffffffff880106b0
=> Loading section .fini, size 0x30 lma ffffffff880106f8
=> Loading section .ctors, size 0x8 lma ffffffff88010728
=> Loading section .dtors, size 0x8 lma ffffffff88010730
=> Loading section .rdata, size 0x1de9 lma ffffffff88010740
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012530
=> Loading section .data, size 0x458 lma ffffffff88012548
=> Start address ffffffff88000004
=> Transfer rate: 609416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[449/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal15.exe
Result: invalid
Time: 0:00:00.270672 spfatal15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10640 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010640
=> Loading section .init, size 0x48 lma ffffffff880106b0
=> Loading section .fini, size 0x30 lma ffffffff880106f8
=> Loading section .ctors, size 0x8 lma ffffffff88010728
=> Loading section .dtors, size 0x8 lma ffffffff88010730
=> Loading section .rdata, size 0x1de9 lma ffffffff88010740
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012530
=> Loading section .data, size 0x458 lma ffffffff88012548
=> Start address ffffffff88000004
=> Transfer rate: 609416 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[450/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal28.exe
Result: invalid
Time: 0:00:00.272599 spfatal28.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10600 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010600
=> Loading section .init, size 0x48 lma ffffffff88010670
=> Loading section .fini, size 0x30 lma ffffffff880106b8
=> Loading section .ctors, size 0x8 lma ffffffff880106e8
=> Loading section .dtors, size 0x8 lma ffffffff880106f0
=> Loading section .rdata, size 0x1de1 lma ffffffff88010700
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e8
=> Loading section .data, size 0x458 lma ffffffff88012500
=> Start address ffffffff88000004
=> Transfer rate: 608840 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[451/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal29.exe
Result: invalid
Time: 0:00:00.268335 spfatal29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10aa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010aa0
=> Loading section .init, size 0x48 lma ffffffff88010b20
=> Loading section .fini, size 0x30 lma ffffffff88010b68
=> Loading section .ctors, size 0x8 lma ffffffff88010b98
=> Loading section .dtors, size 0x8 lma ffffffff88010ba0
=> Loading section .rdata, size 0x1e29 lma ffffffff88010bb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e0
=> Loading section .data, size 0x490 lma ffffffff880129f8
=> Start address ffffffff88000004
=> Transfer rate: 619464 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[452/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal30.exe
Result: invalid
Time: 0:00:00.269854 spfatal30.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xe880 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800e880
=> Loading section .init, size 0x48 lma ffffffff8800e8f0
=> Loading section .fini, size 0x30 lma ffffffff8800e938
=> Loading section .ctors, size 0x8 lma ffffffff8800e968
=> Loading section .dtors, size 0x8 lma ffffffff8800e970
=> Loading section .rdata, size 0x18a1 lma ffffffff8800e980
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010228
=> Loading section .data, size 0x414 lma ffffffff88010240
=> Start address ffffffff88000004
=> Transfer rate: 537128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[453/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal31.exe
Result: invalid
Time: 0:00:00.275831 spfatal31.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfa40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fa40
=> Loading section .init, size 0x48 lma ffffffff8800fab0
=> Loading section .fini, size 0x30 lma ffffffff8800faf8
=> Loading section .ctors, size 0x8 lma ffffffff8800fb28
=> Loading section .dtors, size 0x8 lma ffffffff8800fb30
=> Loading section .rdata, size 0x1909 lma ffffffff8800fb40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011450
=> Loading section .data, size 0x454 lma ffffffff88011468
=> Start address ffffffff88000004
=> Transfer rate: 574824 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[454/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal32.exe
Result: invalid
Time: 0:00:00.269802 spfatal32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10670 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010670
=> Loading section .init, size 0x48 lma ffffffff880106e0
=> Loading section .fini, size 0x30 lma ffffffff88010728
=> Loading section .ctors, size 0x8 lma ffffffff88010758
=> Loading section .dtors, size 0x8 lma ffffffff88010760
=> Loading section .rdata, size 0x1df1 lma ffffffff88010770
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012568
=> Loading section .data, size 0x458 lma ffffffff88012580
=> Start address ffffffff88000004
=> Transfer rate: 609864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[455/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal33.exe
Result: invalid
Time: 0:00:00.268396 spfatal33.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106c0
=> Loading section .init, size 0x48 lma ffffffff88010730
=> Loading section .fini, size 0x30 lma ffffffff88010778
=> Loading section .ctors, size 0x8 lma ffffffff880107a8
=> Loading section .dtors, size 0x8 lma ffffffff880107b0
=> Loading section .rdata, size 0x1e11 lma ffffffff880107c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125d8
=> Loading section .data, size 0x458 lma ffffffff880125f0
=> Start address ffffffff88000004
=> Transfer rate: 610760 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[456/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:447 W:0 | mipstx39/jmr3904: spfatal34.exe
Result: invalid
Time: 0:00:00.265859 spfatal34.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10440 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010440
=> Loading section .init, size 0x48 lma ffffffff880104b0
=> Loading section .fini, size 0x30 lma ffffffff880104f8
=> Loading section .ctors, size 0x8 lma ffffffff88010528
=> Loading section .dtors, size 0x8 lma ffffffff88010530
=> Loading section .rdata, size 0x1dd4 lma ffffffff88010540
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012318
=> Loading section .data, size 0x458 lma ffffffff88012330
=> Start address ffffffff88000004
=> Transfer rate: 605152 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[457/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spfifo01.exe
Result: invalid
Time: 0:00:00.274175 spfifo01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf960 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f960
=> Loading section .init, size 0x48 lma ffffffff8800f9d0
=> Loading section .fini, size 0x30 lma ffffffff8800fa18
=> Loading section .ctors, size 0x8 lma ffffffff8800fa48
=> Loading section .dtors, size 0x8 lma ffffffff8800fa50
=> Loading section .rdata, size 0x1a7d lma ffffffff8800fa60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880114e0
=> Loading section .data, size 0x448 lma ffffffff880114f8
=> Start address ffffffff88000004
=> Transfer rate: 575912 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[458/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spfifo02.exe
Result: invalid
Time: 0:00:00.269232 spfifo02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12bb0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012bb0
=> Loading section .init, size 0x48 lma ffffffff88012c30
=> Loading section .fini, size 0x30 lma ffffffff88012c78
=> Loading section .ctors, size 0x8 lma ffffffff88012ca8
=> Loading section .dtors, size 0x8 lma ffffffff88012cb0
=> Loading section .rdata, size 0x268c lma ffffffff88012cc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015350
=> Loading section .data, size 0x480 lma ffffffff88015368
=> Start address ffffffff88000004
=> Transfer rate: 704224 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[459/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spfifo03.exe
Result: invalid
Time: 0:00:00.273061 spfifo03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x140b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880140b0
=> Loading section .init, size 0x48 lma ffffffff88014130
=> Loading section .fini, size 0x30 lma ffffffff88014178
=> Loading section .ctors, size 0x8 lma ffffffff880141a8
=> Loading section .dtors, size 0x8 lma ffffffff880141b0
=> Loading section .rdata, size 0x27e8 lma ffffffff880141c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169a8
=> Loading section .data, size 0x4bc lma ffffffff880169c0
=> Start address ffffffff88000004
=> Transfer rate: 750496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[460/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spfifo04.exe
Result: invalid
Time: 0:00:00.271257 spfifo04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12a60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012a60
=> Loading section .init, size 0x48 lma ffffffff88012ae0
=> Loading section .fini, size 0x30 lma ffffffff88012b28
=> Loading section .ctors, size 0x8 lma ffffffff88012b58
=> Loading section .dtors, size 0x8 lma ffffffff88012b60
=> Loading section .rdata, size 0x1de0 lma ffffffff88012b70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014950
=> Loading section .data, size 0x480 lma ffffffff88014968
=> Start address ffffffff88000004
=> Transfer rate: 683776 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[461/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spfifo05.exe
Result: invalid
Time: 0:00:00.265177 spfifo05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12f40 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012f40
=> Loading section .init, size 0x48 lma ffffffff88012fc0
=> Loading section .fini, size 0x30 lma ffffffff88013008
=> Loading section .ctors, size 0x8 lma ffffffff88013038
=> Loading section .dtors, size 0x8 lma ffffffff88013040
=> Loading section .rdata, size 0x290c lma ffffffff88013050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015960
=> Loading section .data, size 0x4a0 lma ffffffff88015978
=> Start address ffffffff88000004
=> Transfer rate: 716896 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[462/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spfreechain01.exe
Result: invalid
Time: 0:00:00.274856 spfreechain01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfb50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fb50
=> Loading section .init, size 0x48 lma ffffffff8800fbc0
=> Loading section .fini, size 0x30 lma ffffffff8800fc08
=> Loading section .ctors, size 0x8 lma ffffffff8800fc38
=> Loading section .dtors, size 0x8 lma ffffffff8800fc40
=> Loading section .rdata, size 0x1b89 lma ffffffff8800fc50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117e0
=> Loading section .data, size 0x450 lma ffffffff880117f8
=> Start address ffffffff88000004
=> Transfer rate: 582088 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[463/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid
Time: 0:00:00.272397 spglobalcon01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xeee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff8800eee0
=> Loading section .init, size 0x48 lma ffffffff8800ef40
=> Loading section .fini, size 0x30 lma ffffffff8800ef88
=> Loading section .ctors, size 0xc lma ffffffff8800efb8
=> Loading section .dtors, size 0x8 lma ffffffff8800efc4
=> Loading section .rdata, size 0x19a0 lma ffffffff8800efd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010970
=> Loading section .data, size 0x3d0 lma ffffffff88010988
=> Start address ffffffff88000004
=> Transfer rate: 551584 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[464/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:455 W:0 | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid
Time: 0:00:00.261755 spglobalcon02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108e0
=> Loading section .init, size 0x48 lma ffffffff88010950
=> Loading section .fini, size 0x30 lma ffffffff88010998
=> Loading section .ctors, size 0x18 lma ffffffff880109c8
=> Loading section .dtors, size 0x18 lma ffffffff880109e0
=> Loading section .rdata, size 0x1a54 lma ffffffff88010a00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012458
=> Loading section .data, size 0x458 lma ffffffff88012470
=> Start address ffffffff88000004
=> Transfer rate: 607712 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[465/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spheapprot.exe
Result: invalid
Time: 0:00:00.274149 spheapprot.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf9c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f9c0
=> Loading section .init, size 0x48 lma ffffffff8800fa30
=> Loading section .fini, size 0x30 lma ffffffff8800fa78
=> Loading section .ctors, size 0x8 lma ffffffff8800faa8
=> Loading section .dtors, size 0x8 lma ffffffff8800fab0
=> Loading section .rdata, size 0x1998 lma ffffffff8800fac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011458
=> Loading section .data, size 0x448 lma ffffffff88011470
=> Start address ffffffff88000004
=> Transfer rate: 574848 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[466/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid
Time: 0:00:00.275803 spinternalerror01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x4890 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x50 lma ffffffff88004890
=> Loading section .init, size 0x48 lma ffffffff880048e0
=> Loading section .fini, size 0x30 lma ffffffff88004928
=> Loading section .ctors, size 0x8 lma ffffffff88004958
=> Loading section .dtors, size 0x8 lma ffffffff88004960
=> Loading section .rdata, size 0x1448 lma ffffffff88004970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88005db8
=> Loading section .data, size 0x88 lma ffffffff88005dd0
=> Start address ffffffff88000004
=> Transfer rate: 193152 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[467/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid
Time: 0:00:00.284061 spinternalerror02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f970
=> Loading section .init, size 0x48 lma ffffffff8800f9e0
=> Loading section .fini, size 0x30 lma ffffffff8800fa28
=> Loading section .ctors, size 0x8 lma ffffffff8800fa58
=> Loading section .dtors, size 0x8 lma ffffffff8800fa60
=> Loading section .rdata, size 0x1d75 lma ffffffff8800fa70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117e8
=> Loading section .data, size 0x448 lma ffffffff88011800
=> Start address ffffffff88000004
=> Transfer rate: 582120 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[468/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spintr_err01.exe
Result: invalid
Time: 0:00:00.267978 spintr_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x103f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880103f0
=> Loading section .init, size 0x48 lma ffffffff88010460
=> Loading section .fini, size 0x30 lma ffffffff880104a8
=> Loading section .ctors, size 0x8 lma ffffffff880104d8
=> Loading section .dtors, size 0x8 lma ffffffff880104e0
=> Loading section .rdata, size 0x1a21 lma ffffffff880104f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f18
=> Loading section .data, size 0x458 lma ffffffff88011f30
=> Start address ffffffff88000004
=> Transfer rate: 596936 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[469/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: splinkersets01.exe
Result: invalid
Time: 0:00:00.274068 splinkersets01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10090 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb0 lma ffffffff88010090
=> Loading section .init, size 0x48 lma ffffffff88010140
=> Loading section .fini, size 0x30 lma ffffffff88010188
=> Loading section .ctors, size 0x8 lma ffffffff880101b8
=> Loading section .dtors, size 0x8 lma ffffffff880101c0
=> Loading section .rdata, size 0x2229 lma ffffffff880101d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012400
=> Loading section .data, size 0x448 lma ffffffff88012418
=> Loading section .rtemsrwset, size 0x34 lma ffffffff88012860
=> Start address ffffffff88000004
=> Transfer rate: 607272 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[470/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spmisc01.exe
Result: invalid
Time: 0:00:00.264058 spmisc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf9e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f9e0
=> Loading section .init, size 0x48 lma ffffffff8800fa50
=> Loading section .fini, size 0x30 lma ffffffff8800fa98
=> Loading section .ctors, size 0x8 lma ffffffff8800fac8
=> Loading section .dtors, size 0x8 lma ffffffff8800fad0
=> Loading section .rdata, size 0x1af1 lma ffffffff8800fae0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115d8
=> Loading section .data, size 0x448 lma ffffffff880115f0
=> Start address ffffffff88000004
=> Transfer rate: 577864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[471/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spmkdir.exe
Result: invalid
Time: 0:00:00.269737 spmkdir.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10130 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010130
=> Loading section .init, size 0x48 lma ffffffff880101a0
=> Loading section .fini, size 0x30 lma ffffffff880101e8
=> Loading section .ctors, size 0x8 lma ffffffff88010218
=> Loading section .dtors, size 0x8 lma ffffffff88010220
=> Loading section .rdata, size 0x1c40 lma ffffffff88010230
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e70
=> Loading section .data, size 0x448 lma ffffffff88011e88
=> Start address ffffffff88000004
=> Transfer rate: 595520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[472/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:463 W:0 | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid
Time: 0:00:00.255853 spmountmgr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x105a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880105a0
=> Loading section .init, size 0x48 lma ffffffff88010610
=> Loading section .fini, size 0x30 lma ffffffff88010658
=> Loading section .ctors, size 0x8 lma ffffffff88010688
=> Loading section .dtors, size 0x8 lma ffffffff88010690
=> Loading section .rdata, size 0x1ce1 lma ffffffff880106a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012388
=> Loading section .data, size 0x448 lma ffffffff880123a0
=> Start address ffffffff88000004
=> Transfer rate: 605896 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[473/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spmrsp01.exe
Result: invalid
Time: 0:00:00.270740 spmrsp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12c90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012c90
=> Loading section .init, size 0x48 lma ffffffff88012d10
=> Loading section .fini, size 0x30 lma ffffffff88012d58
=> Loading section .ctors, size 0x8 lma ffffffff88012d88
=> Loading section .dtors, size 0x8 lma ffffffff88012d90
=> Loading section .rdata, size 0x1c5d lma ffffffff88012da0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a00
=> Loading section .data, size 0x4c0 lma ffffffff88014a18
=> Start address ffffffff88000004
=> Transfer rate: 685672 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[474/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid
Time: 0:00:00.272089 spmsgq_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x129b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880129b0
=> Loading section .init, size 0x48 lma ffffffff88012a30
=> Loading section .fini, size 0x30 lma ffffffff88012a78
=> Loading section .ctors, size 0x8 lma ffffffff88012aa8
=> Loading section .dtors, size 0x8 lma ffffffff88012ab0
=> Loading section .rdata, size 0x2aa5 lma ffffffff88012ac0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015568
=> Loading section .data, size 0x490 lma ffffffff88015580
=> Start address ffffffff88000004
=> Transfer rate: 708648 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[475/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid
Time: 0:00:00.269799 spmsgq_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11ef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011ef0
=> Loading section .init, size 0x48 lma ffffffff88011f70
=> Loading section .fini, size 0x30 lma ffffffff88011fb8
=> Loading section .ctors, size 0x8 lma ffffffff88011fe8
=> Loading section .dtors, size 0x8 lma ffffffff88011ff0
=> Loading section .rdata, size 0x22b9 lma ffffffff88012000
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142c0
=> Loading section .data, size 0x490 lma ffffffff880142d8
=> Start address ffffffff88000004
=> Transfer rate: 670408 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[476/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spmutex01.exe
Result: invalid
Time: 0:00:00.299306 spmutex01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x146c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880146c0
=> Loading section .init, size 0x48 lma ffffffff88014740
=> Loading section .fini, size 0x30 lma ffffffff88014788
=> Loading section .ctors, size 0x8 lma ffffffff880147b8
=> Loading section .dtors, size 0x8 lma ffffffff880147c0
=> Loading section .rdata, size 0x1bfd lma ffffffff880147d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880163d0
=> Loading section .data, size 0x4c0 lma ffffffff880163e8
=> Start address ffffffff88000004
=> Transfer rate: 738536 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[477/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spnsext01.exe
Result: invalid
Time: 0:00:00.273049 spnsext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10850 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010850
=> Loading section .init, size 0x48 lma ffffffff880108c0
=> Loading section .fini, size 0x30 lma ffffffff88010908
=> Loading section .ctors, size 0x8 lma ffffffff88010938
=> Loading section .dtors, size 0x8 lma ffffffff88010940
=> Loading section .rdata, size 0x1a1d lma ffffffff88010950
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012370
=> Loading section .data, size 0x458 lma ffffffff88012388
=> Start address ffffffff88000004
=> Transfer rate: 605864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[478/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spntp01.exe
Result: invalid
Time: 0:00:00.277846 spntp01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x16910 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88016910
=> Loading section .init, size 0x48 lma ffffffff88016990
=> Loading section .fini, size 0x30 lma ffffffff880169d8
=> Loading section .ctors, size 0x8 lma ffffffff88016a08
=> Loading section .dtors, size 0x8 lma ffffffff88016a10
=> Loading section .rdata, size 0x2340 lma ffffffff88016a20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018d60
=> Loading section .data, size 0x498 lma ffffffff88018d78
=> Start address ffffffff88000004
=> Transfer rate: 823360 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[479/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid
Time: 0:00:00.273698 spobjgetnext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107d0
=> Loading section .init, size 0x48 lma ffffffff88010840
=> Loading section .fini, size 0x30 lma ffffffff88010888
=> Loading section .ctors, size 0x8 lma ffffffff880108b8
=> Loading section .dtors, size 0x8 lma ffffffff880108c0
=> Loading section .rdata, size 0x1a9d lma ffffffff880108d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012370
=> Loading section .data, size 0x460 lma ffffffff88012388
=> Start address ffffffff88000004
=> Transfer rate: 605928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[480/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:471 W:0 | mipstx39/jmr3904: sppagesize.exe
Result: invalid
Time: 0:00:00.264781 sppagesize.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf850 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f850
=> Loading section .init, size 0x48 lma ffffffff8800f8c0
=> Loading section .fini, size 0x30 lma ffffffff8800f908
=> Loading section .ctors, size 0x8 lma ffffffff8800f938
=> Loading section .dtors, size 0x8 lma ffffffff8800f940
=> Loading section .rdata, size 0x19e9 lma ffffffff8800f950
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011340
=> Loading section .data, size 0x448 lma ffffffff88011358
=> Start address ffffffff88000004
=> Transfer rate: 572552 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[481/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid
Time: 0:00:00.267823 sppartition_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11710 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011710
=> Loading section .init, size 0x48 lma ffffffff88011790
=> Loading section .fini, size 0x30 lma ffffffff880117d8
=> Loading section .ctors, size 0x8 lma ffffffff88011808
=> Loading section .dtors, size 0x8 lma ffffffff88011810
=> Loading section .rdata, size 0x25b1 lma ffffffff88011820
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013dd8
=> Loading section .data, size 0x490 lma ffffffff88013df0
=> Start address ffffffff88000004
=> Transfer rate: 660360 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[482/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid
Time: 0:00:00.275042 sppercpudata01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x100d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880100d0
=> Loading section .init, size 0x48 lma ffffffff88010140
=> Loading section .fini, size 0x30 lma ffffffff88010188
=> Loading section .ctors, size 0x8 lma ffffffff880101b8
=> Loading section .dtors, size 0x8 lma ffffffff880101c0
=> Loading section .rdata, size 0x1b59 lma ffffffff880101d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d30
=> Loading section .data, size 0x448 lma ffffffff88011d48
=> Loading section .rtemsrwset, size 0x4c lma ffffffff88012190
=> Start address ffffffff88000004
=> Transfer rate: 593512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[483/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: spport_err01.exe
Result: invalid
Time: 0:00:00.269018 spport_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010f20
=> Loading section .init, size 0x48 lma ffffffff88010fa0
=> Loading section .fini, size 0x30 lma ffffffff88010fe8
=> Loading section .ctors, size 0x8 lma ffffffff88011018
=> Loading section .dtors, size 0x8 lma ffffffff88011020
=> Loading section .rdata, size 0x209d lma ffffffff88011030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130d0
=> Loading section .data, size 0x490 lma ffffffff880130e8
=> Start address ffffffff88000004
=> Transfer rate: 633704 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[484/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: sppps01.exe
Result: invalid
Time: 0:00:00.268830 sppps01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17a60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88017a60
=> Loading section .init, size 0x48 lma ffffffff88017ae0
=> Loading section .fini, size 0x30 lma ffffffff88017b28
=> Loading section .ctors, size 0x8 lma ffffffff88017b58
=> Loading section .dtors, size 0x8 lma ffffffff88017b60
=> Loading section .rdata, size 0x226c lma ffffffff88017b70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019de0
=> Loading section .data, size 0x4b0 lma ffffffff88019df8
=> Start address ffffffff88000004
=> Transfer rate: 857312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[485/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: spprintk.exe
Result: invalid
Time: 0:00:00.263805 spprintk.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf8b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f8b0
=> Loading section .init, size 0x48 lma ffffffff8800f920
=> Loading section .fini, size 0x30 lma ffffffff8800f968
=> Loading section .ctors, size 0x8 lma ffffffff8800f998
=> Loading section .dtors, size 0x8 lma ffffffff8800f9a0
=> Loading section .rdata, size 0x2401 lma ffffffff8800f9b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011db8
=> Loading section .data, size 0x408 lma ffffffff88011dd0
=> Start address ffffffff88000004
=> Transfer rate: 593480 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[486/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: spprivenv01.exe
Result: invalid
Time: 0:00:00.277237 spprivenv01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x119c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880119c0
=> Loading section .init, size 0x48 lma ffffffff88011a40
=> Loading section .fini, size 0x30 lma ffffffff88011a88
=> Loading section .ctors, size 0x8 lma ffffffff88011ab8
=> Loading section .dtors, size 0x8 lma ffffffff88011ac0
=> Loading section .rdata, size 0x2114 lma ffffffff88011ad0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013be8
=> Loading section .data, size 0x49c lma ffffffff88013c00
=> Start address ffffffff88000004
=> Transfer rate: 656512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[487/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: spprofiling01.exe
Result: invalid
Time: 0:00:00.276928 spprofiling01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10790 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010790
=> Loading section .init, size 0x48 lma ffffffff88010800
=> Loading section .fini, size 0x30 lma ffffffff88010848
=> Loading section .ctors, size 0x8 lma ffffffff88010878
=> Loading section .dtors, size 0x8 lma ffffffff88010880
=> Loading section .rdata, size 0x1a95 lma ffffffff88010890
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012328
=> Loading section .data, size 0x458 lma ffffffff88012340
=> Start address ffffffff88000004
=> Transfer rate: 605288 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[488/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:479 W:0 | mipstx39/jmr3904: spqreslib.exe
Result: invalid
Time: 0:00:00.269192 spqreslib.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x138a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880138a0
=> Loading section .init, size 0x48 lma ffffffff88013920
=> Loading section .fini, size 0x30 lma ffffffff88013968
=> Loading section .ctors, size 0x8 lma ffffffff88013998
=> Loading section .dtors, size 0x8 lma ffffffff880139a0
=> Loading section .rdata, size 0x2690 lma ffffffff880139b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016040
=> Loading section .data, size 0x490 lma ffffffff88016058
=> Start address ffffffff88000004
=> Transfer rate: 730880 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[489/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid
Time: 0:00:00.265321 spratemon_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12480 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012480
=> Loading section .init, size 0x48 lma ffffffff88012500
=> Loading section .fini, size 0x30 lma ffffffff88012548
=> Loading section .ctors, size 0x8 lma ffffffff88012578
=> Loading section .dtors, size 0x8 lma ffffffff88012580
=> Loading section .rdata, size 0x2761 lma ffffffff88012590
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014cf8
=> Loading section .data, size 0x490 lma ffffffff88014d10
=> Start address ffffffff88000004
=> Transfer rate: 691336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[490/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: sprbtree01.exe
Result: invalid
Time: 0:00:00.267824 sprbtree01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11930 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011930
=> Loading section .init, size 0x48 lma ffffffff880119a0
=> Loading section .fini, size 0x30 lma ffffffff880119e8
=> Loading section .ctors, size 0x8 lma ffffffff88011a18
=> Loading section .dtors, size 0x8 lma ffffffff88011a20
=> Loading section .rdata, size 0x6f85 lma ffffffff88011a30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880189b8
=> Loading section .data, size 0x4d8 lma ffffffff880189d0
=> Start address ffffffff88000004
=> Transfer rate: 816360 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[491/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: spregion_err01.exe
Result: invalid
Time: 0:00:00.276626 spregion_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12ff0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012ff0
=> Loading section .init, size 0x48 lma ffffffff88013070
=> Loading section .fini, size 0x30 lma ffffffff880130b8
=> Loading section .ctors, size 0x8 lma ffffffff880130e8
=> Loading section .dtors, size 0x8 lma ffffffff880130f0
=> Loading section .rdata, size 0x2965 lma ffffffff88013100
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015a68
=> Loading section .data, size 0x490 lma ffffffff88015a80
=> Start address ffffffff88000004
=> Transfer rate: 718888 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[492/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: sprmsched01.exe
Result: invalid
Time: 0:00:00.269419 sprmsched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11cf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011cf0
=> Loading section .init, size 0x48 lma ffffffff88011d70
=> Loading section .fini, size 0x30 lma ffffffff88011db8
=> Loading section .ctors, size 0x8 lma ffffffff88011de8
=> Loading section .dtors, size 0x8 lma ffffffff88011df0
=> Loading section .rdata, size 0x1f65 lma ffffffff88011e00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d68
=> Loading section .data, size 0x490 lma ffffffff88013d80
=> Start address ffffffff88000004
=> Transfer rate: 659496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[493/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: sprmsched02.exe
Result: invalid
Time: 0:00:00.253713 sprmsched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11460 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011460
=> Loading section .init, size 0x48 lma ffffffff880114e0
=> Loading section .fini, size 0x30 lma ffffffff88011528
=> Loading section .ctors, size 0x8 lma ffffffff88011558
=> Loading section .dtors, size 0x8 lma ffffffff88011560
=> Loading section .rdata, size 0x1f2d lma ffffffff88011570
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134a0
=> Loading section .data, size 0x490 lma ffffffff880134b8
=> Start address ffffffff88000004
=> Transfer rate: 641512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[494/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: spscheduler01.exe
Result: invalid
Time: 0:00:00.259310 spscheduler01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x155a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880155a0
=> Loading section .init, size 0x48 lma ffffffff88015620
=> Loading section .fini, size 0x30 lma ffffffff88015668
=> Loading section .ctors, size 0x8 lma ffffffff88015698
=> Loading section .dtors, size 0x8 lma ffffffff880156a0
=> Loading section .rdata, size 0x1e59 lma ffffffff880156b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017510
=> Loading section .data, size 0x4c0 lma ffffffff88017528
=> Start address ffffffff88000004
=> Transfer rate: 773832 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[495/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: spsem01.exe
Result: invalid
Time: 0:00:00.262886 spsem01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012190
=> Loading section .init, size 0x48 lma ffffffff88012210
=> Loading section .fini, size 0x30 lma ffffffff88012258
=> Loading section .ctors, size 0x8 lma ffffffff88012288
=> Loading section .dtors, size 0x8 lma ffffffff88012290
=> Loading section .rdata, size 0x2085 lma ffffffff880122a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014328
=> Loading section .data, size 0x490 lma ffffffff88014340
=> Start address ffffffff88000004
=> Transfer rate: 671272 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[496/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:487 W:0 | mipstx39/jmr3904: spsem02.exe
Result: invalid
Time: 0:00:00.266243 spsem02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12490 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012490
=> Loading section .init, size 0x48 lma ffffffff88012510
=> Loading section .fini, size 0x30 lma ffffffff88012558
=> Loading section .ctors, size 0x8 lma ffffffff88012588
=> Loading section .dtors, size 0x8 lma ffffffff88012590
=> Loading section .rdata, size 0x2145 lma ffffffff880125a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880146e8
=> Loading section .data, size 0x490 lma ffffffff88014700
=> Start address ffffffff88000004
=> Transfer rate: 678952 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[497/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsem03.exe
Result: invalid
Time: 0:00:00.269589 spsem03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x113d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880113d0
=> Loading section .init, size 0x48 lma ffffffff88011450
=> Loading section .fini, size 0x30 lma ffffffff88011498
=> Loading section .ctors, size 0x8 lma ffffffff880114c8
=> Loading section .dtors, size 0x8 lma ffffffff880114d0
=> Loading section .rdata, size 0x1a19 lma ffffffff880114e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f00
=> Loading section .data, size 0x490 lma ffffffff88012f18
=> Start address ffffffff88000004
=> Transfer rate: 629960 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[498/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsem_err01.exe
Result: invalid
Time: 0:00:00.276177 spsem_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11e90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011e90
=> Loading section .init, size 0x48 lma ffffffff88011f10
=> Loading section .fini, size 0x30 lma ffffffff88011f58
=> Loading section .ctors, size 0x8 lma ffffffff88011f88
=> Loading section .dtors, size 0x8 lma ffffffff88011f90
=> Loading section .rdata, size 0x24a9 lma ffffffff88011fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014450
=> Loading section .data, size 0x490 lma ffffffff88014468
=> Start address ffffffff88000004
=> Transfer rate: 673608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[499/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsem_err02.exe
Result: invalid
Time: 0:00:00.275903 spsem_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12070 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012070
=> Loading section .init, size 0x48 lma ffffffff880120f0
=> Loading section .fini, size 0x30 lma ffffffff88012138
=> Loading section .ctors, size 0x8 lma ffffffff88012168
=> Loading section .dtors, size 0x8 lma ffffffff88012170
=> Loading section .rdata, size 0x2341 lma ffffffff88012180
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144c8
=> Loading section .data, size 0x490 lma ffffffff880144e0
=> Start address ffffffff88000004
=> Transfer rate: 674568 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[500/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid
Time: 0:00:00.273532 spsignal_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a60
=> Loading section .init, size 0x48 lma ffffffff88010ad0
=> Loading section .fini, size 0x30 lma ffffffff88010b18
=> Loading section .ctors, size 0x8 lma ffffffff88010b48
=> Loading section .dtors, size 0x8 lma ffffffff88010b50
=> Loading section .rdata, size 0x1e89 lma ffffffff88010b60
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129f0
=> Loading section .data, size 0x460 lma ffffffff88012a08
=> Start address ffffffff88000004
=> Transfer rate: 619208 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[501/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid
Time: 0:00:00.271158 spsimplesched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11fa0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011fa0
=> Loading section .init, size 0x48 lma ffffffff88012010
=> Loading section .fini, size 0x30 lma ffffffff88012058
=> Loading section .ctors, size 0x8 lma ffffffff88012088
=> Loading section .dtors, size 0x8 lma ffffffff88012090
=> Loading section .rdata, size 0x2044 lma ffffffff880120a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140e8
=> Loading section .data, size 0x600 lma ffffffff88014100
=> Start address ffffffff88000004
=> Transfer rate: 669600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[502/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid
Time: 0:00:00.266715 spsimplesched02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11a30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011a30
=> Loading section .init, size 0x48 lma ffffffff88011ab0
=> Loading section .fini, size 0x30 lma ffffffff88011af8
=> Loading section .ctors, size 0x8 lma ffffffff88011b28
=> Loading section .dtors, size 0x8 lma ffffffff88011b30
=> Loading section .rdata, size 0x1f95 lma ffffffff88011b40
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ad8
=> Loading section .data, size 0x490 lma ffffffff88013af0
=> Start address ffffffff88000004
=> Transfer rate: 654248 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[503/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid
Time: 0:00:00.268569 spsimplesched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10840 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010840
=> Loading section .init, size 0x48 lma ffffffff880108c0
=> Loading section .fini, size 0x30 lma ffffffff88010908
=> Loading section .ctors, size 0x8 lma ffffffff88010938
=> Loading section .dtors, size 0x8 lma ffffffff88010940
=> Loading section .rdata, size 0x1ded lma ffffffff88010950
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012740
=> Loading section .data, size 0x490 lma ffffffff88012758
=> Start address ffffffff88000004
=> Transfer rate: 614120 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[504/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:495 W:0 | mipstx39/jmr3904: spsize.exe
Result: invalid
Time: 0:00:00.271268 spsize.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012b30
=> Loading section .init, size 0x48 lma ffffffff88012ba0
=> Loading section .fini, size 0x30 lma ffffffff88012be8
=> Loading section .ctors, size 0x8 lma ffffffff88012c18
=> Loading section .dtors, size 0x8 lma ffffffff88012c20
=> Loading section .rdata, size 0x2524 lma ffffffff88012c30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015158
=> Loading section .data, size 0x458 lma ffffffff88015170
=> Start address ffffffff88000004
=> Transfer rate: 699872 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[505/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid
Time: 0:00:00.276413 spstdthreads01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x14860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88014860
=> Loading section .init, size 0x48 lma ffffffff880148e0
=> Loading section .fini, size 0x30 lma ffffffff88014928
=> Loading section .ctors, size 0x8 lma ffffffff88014958
=> Loading section .dtors, size 0x8 lma ffffffff88014960
=> Loading section .rdata, size 0x1c55 lma ffffffff88014970
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880165c8
=> Loading section .data, size 0x570 lma ffffffff880165e0
=> Start address ffffffff88000004
=> Transfer rate: 743976 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[506/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spstkalloc.exe
Result: invalid
Time: 0:00:00.261023 spstkalloc.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff30
=> Loading section .init, size 0x48 lma ffffffff8800ffa0
=> Loading section .fini, size 0x30 lma ffffffff8800ffe8
=> Loading section .ctors, size 0x8 lma ffffffff88010018
=> Loading section .dtors, size 0x8 lma ffffffff88010020
=> Loading section .rdata, size 0x1e98 lma ffffffff88010030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ec8
=> Loading section .data, size 0x450 lma ffffffff88011ee0
=> Start address ffffffff88000004
=> Transfer rate: 596288 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[507/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid
Time: 0:00:00.270929 spstkalloc02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xa200 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800a200
=> Loading section .init, size 0x48 lma ffffffff8800a270
=> Loading section .fini, size 0x30 lma ffffffff8800a2b8
=> Loading section .ctors, size 0x8 lma ffffffff8800a2e8
=> Loading section .dtors, size 0x8 lma ffffffff8800a2f0
=> Loading section .rdata, size 0x19ac lma ffffffff8800a300
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bcb0
=> Loading section .data, size 0x334 lma ffffffff8800bcc8
=> Start address ffffffff88000004
=> Transfer rate: 393088 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[508/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid
Time: 0:00:00.257601 spstkalloc03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17ee0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017ee0
=> Loading section .init, size 0x48 lma ffffffff88017f50
=> Loading section .fini, size 0x30 lma ffffffff88017f98
=> Loading section .ctors, size 0x8 lma ffffffff88017fc8
=> Loading section .dtors, size 0x8 lma ffffffff88017fd0
=> Loading section .rdata, size 0x20b8 lma ffffffff88017fe0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a098
=> Loading section .data, size 0x5e0 lma ffffffff8801a0b0
=> Start address ffffffff88000004
=> Transfer rate: 865344 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[509/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid
Time: 0:00:00.269175 spstkalloc04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17e80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88017e80
=> Loading section .init, size 0x48 lma ffffffff88017ef0
=> Loading section .fini, size 0x30 lma ffffffff88017f38
=> Loading section .ctors, size 0x8 lma ffffffff88017f68
=> Loading section .dtors, size 0x8 lma ffffffff88017f70
=> Loading section .rdata, size 0x2080 lma ffffffff88017f80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a000
=> Loading section .data, size 0x5e0 lma ffffffff8801a018
=> Start address ffffffff88000004
=> Transfer rate: 864128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[510/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spsysinit01.exe
Result: invalid
Time: 0:00:00.276753 spsysinit01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19000 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x310 lma ffffffff88019000
=> Loading section .init, size 0x48 lma ffffffff88019310
=> Loading section .fini, size 0x30 lma ffffffff88019358
=> Loading section .ctors, size 0x8 lma ffffffff88019388
=> Loading section .dtors, size 0x8 lma ffffffff88019390
=> Loading section .rdata, size 0x3a54 lma ffffffff880193a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cdf8
=> Loading section .data, size 0x808 lma ffffffff8801ce10
=> Start address ffffffff88000004
=> Transfer rate: 962656 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[511/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: spsyslock01.exe
Result: invalid
Time: 0:00:00.268658 spsyslock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13c20 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88013c20
=> Loading section .init, size 0x48 lma ffffffff88013c90
=> Loading section .fini, size 0x30 lma ffffffff88013cd8
=> Loading section .ctors, size 0x8 lma ffffffff88013d08
=> Loading section .dtors, size 0x8 lma ffffffff88013d10
=> Loading section .rdata, size 0x1e75 lma ffffffff88013d20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015b98
=> Loading section .data, size 0x458 lma ffffffff88015bb0
=> Start address ffffffff88000004
=> Transfer rate: 720872 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[512/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:503 W:0 | mipstx39/jmr3904: sptask_err01.exe
Result: invalid
Time: 0:00:00.266196 sptask_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ce0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ce0
=> Loading section .init, size 0x48 lma ffffffff88010d50
=> Loading section .fini, size 0x30 lma ffffffff88010d98
=> Loading section .ctors, size 0x8 lma ffffffff88010dc8
=> Loading section .dtors, size 0x8 lma ffffffff88010dd0
=> Loading section .rdata, size 0x1f39 lma ffffffff88010de0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d20
=> Loading section .data, size 0x460 lma ffffffff88012d38
=> Start address ffffffff88000004
=> Transfer rate: 625736 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[513/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: sptask_err02.exe
Result: invalid
Time: 0:00:00.274029 sptask_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11be0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011be0
=> Loading section .init, size 0x48 lma ffffffff88011c50
=> Loading section .fini, size 0x30 lma ffffffff88011c98
=> Loading section .ctors, size 0x8 lma ffffffff88011cc8
=> Loading section .dtors, size 0x8 lma ffffffff88011cd0
=> Loading section .rdata, size 0x2159 lma ffffffff88011ce0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e40
=> Loading section .data, size 0x480 lma ffffffff88013e58
=> Start address ffffffff88000004
=> Transfer rate: 661064 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[514/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: sptask_err03.exe
Result: invalid
Time: 0:00:00.273040 sptask_err03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880110b0
=> Loading section .init, size 0x48 lma ffffffff88011120
=> Loading section .fini, size 0x30 lma ffffffff88011168
=> Loading section .ctors, size 0x8 lma ffffffff88011198
=> Loading section .dtors, size 0x8 lma ffffffff880111a0
=> Loading section .rdata, size 0x231d lma ffffffff880111b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134d0
=> Loading section .data, size 0x460 lma ffffffff880134e8
=> Start address ffffffff88000004
=> Transfer rate: 641512 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[515/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: sptask_err04.exe
Result: invalid
Time: 0:00:00.275682 sptask_err04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12110 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88012110
=> Loading section .init, size 0x48 lma ffffffff88012180
=> Loading section .fini, size 0x30 lma ffffffff880121c8
=> Loading section .ctors, size 0x8 lma ffffffff880121f8
=> Loading section .dtors, size 0x8 lma ffffffff88012200
=> Loading section .rdata, size 0x24a1 lma ffffffff88012210
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880146b8
=> Loading section .data, size 0x460 lma ffffffff880146d0
=> Start address ffffffff88000004
=> Transfer rate: 678152 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[516/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid
Time: 0:00:00.276080 sptasknopreempt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x110d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880110d0
=> Loading section .init, size 0x48 lma ffffffff88011150
=> Loading section .fini, size 0x30 lma ffffffff88011198
=> Loading section .ctors, size 0x8 lma ffffffff880111c8
=> Loading section .dtors, size 0x8 lma ffffffff880111d0
=> Loading section .rdata, size 0x1a0d lma ffffffff880111e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012bf0
=> Loading section .data, size 0x490 lma ffffffff88012c08
=> Start address ffffffff88000004
=> Transfer rate: 623720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[517/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: spthread01.exe
Result: invalid
Time: 0:00:00.267316 spthread01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11c10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011c10
=> Loading section .init, size 0x48 lma ffffffff88011c80
=> Loading section .fini, size 0x30 lma ffffffff88011cc8
=> Loading section .ctors, size 0x8 lma ffffffff88011cf8
=> Loading section .dtors, size 0x8 lma ffffffff88011d00
=> Loading section .rdata, size 0x1a4d lma ffffffff88011d10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013760
=> Loading section .data, size 0x458 lma ffffffff88013778
=> Start address ffffffff88000004
=> Transfer rate: 646696 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[518/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid
Time: 0:00:00.272401 spthreadlife01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13360 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013360
=> Loading section .init, size 0x48 lma ffffffff880133e0
=> Loading section .fini, size 0x30 lma ffffffff88013428
=> Loading section .ctors, size 0x8 lma ffffffff88013458
=> Loading section .dtors, size 0x8 lma ffffffff88013460
=> Loading section .rdata, size 0x1d19 lma ffffffff88013470
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015190
=> Loading section .data, size 0x4c0 lma ffffffff880151a8
=> Start address ffffffff88000004
=> Transfer rate: 701128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[519/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: spthreadq01.exe
Result: invalid
Time: 0:00:00.269165 spthreadq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x127d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880127d0
=> Loading section .init, size 0x48 lma ffffffff88012850
=> Loading section .fini, size 0x30 lma ffffffff88012898
=> Loading section .ctors, size 0x8 lma ffffffff880128c8
=> Loading section .dtors, size 0x8 lma ffffffff880128d0
=> Loading section .rdata, size 0x1b9d lma ffffffff880128e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014480
=> Loading section .data, size 0x510 lma ffffffff88014498
=> Start address ffffffff88000004
=> Transfer rate: 675048 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[520/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:511 W:0 | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid
Time: 0:00:00.274314 sptimecounter01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x6f50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x50 lma ffffffff88006f50
=> Loading section .init, size 0x48 lma ffffffff88006fa0
=> Loading section .fini, size 0x30 lma ffffffff88006fe8
=> Loading section .ctors, size 0x8 lma ffffffff88007018
=> Loading section .dtors, size 0x8 lma ffffffff88007020
=> Loading section .rdata, size 0x176c lma ffffffff88007030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880087a0
=> Loading section .data, size 0x288 lma ffffffff880087b8
=> Start address ffffffff88000004
=> Transfer rate: 283040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[521/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid
Time: 0:00:00.273885 sptimecounter02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x128a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880128a0
=> Loading section .init, size 0x48 lma ffffffff88012920
=> Loading section .fini, size 0x30 lma ffffffff88012968
=> Loading section .ctors, size 0x8 lma ffffffff88012998
=> Loading section .dtors, size 0x8 lma ffffffff880129a0
=> Loading section .rdata, size 0x1b65 lma ffffffff880129b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014518
=> Loading section .data, size 0x488 lma ffffffff88014530
=> Start address ffffffff88000004
=> Transfer rate: 675176 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[522/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid
Time: 0:00:00.274094 sptimecounter03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x115d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880115d0
=> Loading section .init, size 0x48 lma ffffffff88011650
=> Loading section .fini, size 0x30 lma ffffffff88011698
=> Loading section .ctors, size 0x8 lma ffffffff880116c8
=> Loading section .dtors, size 0x8 lma ffffffff880116d0
=> Loading section .rdata, size 0x1a3d lma ffffffff880116e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013120
=> Loading section .data, size 0x488 lma ffffffff88013138
=> Start address ffffffff88000004
=> Transfer rate: 634280 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[523/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid
Time: 0:00:00.271023 sptimecounter04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10a90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010a90
=> Loading section .init, size 0x48 lma ffffffff88010b00
=> Loading section .fini, size 0x30 lma ffffffff88010b48
=> Loading section .ctors, size 0x8 lma ffffffff88010b78
=> Loading section .dtors, size 0x8 lma ffffffff88010b80
=> Loading section .rdata, size 0x1ab9 lma ffffffff88010b90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012650
=> Loading section .data, size 0x458 lma ffffffff88012668
=> Start address ffffffff88000004
=> Transfer rate: 611720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[524/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid
Time: 0:00:00.268710 sptimer_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12940 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012940
=> Loading section .init, size 0x48 lma ffffffff880129c0
=> Loading section .fini, size 0x30 lma ffffffff88012a08
=> Loading section .ctors, size 0x8 lma ffffffff88012a38
=> Loading section .dtors, size 0x8 lma ffffffff88012a40
=> Loading section .rdata, size 0x2591 lma ffffffff88012a50
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fe8
=> Loading section .data, size 0x4b0 lma ffffffff88015000
=> Start address ffffffff88000004
=> Transfer rate: 697608 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[525/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid
Time: 0:00:00.274831 sptimer_err02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012900
=> Loading section .init, size 0x48 lma ffffffff88012980
=> Loading section .fini, size 0x30 lma ffffffff880129c8
=> Loading section .ctors, size 0x8 lma ffffffff880129f8
=> Loading section .dtors, size 0x8 lma ffffffff88012a00
=> Loading section .rdata, size 0x23a1 lma ffffffff88012a10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014db8
=> Loading section .data, size 0x4b0 lma ffffffff88014dd0
=> Start address ffffffff88000004
=> Transfer rate: 693128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[526/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid
Time: 0:00:00.270668 sptimerserver01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11de0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011de0
=> Loading section .init, size 0x48 lma ffffffff88011e60
=> Loading section .fini, size 0x30 lma ffffffff88011ea8
=> Loading section .ctors, size 0x8 lma ffffffff88011ed8
=> Loading section .dtors, size 0x8 lma ffffffff88011ee0
=> Loading section .rdata, size 0x1ac9 lma ffffffff88011ef0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139c0
=> Loading section .data, size 0x4b0 lma ffffffff880139d8
=> Start address ffffffff88000004
=> Transfer rate: 652232 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[527/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptimespec01.exe
Result: invalid
Time: 0:00:00.260396 sptimespec01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x111f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880111f0
=> Loading section .init, size 0x48 lma ffffffff88011260
=> Loading section .fini, size 0x30 lma ffffffff880112a8
=> Loading section .ctors, size 0x8 lma ffffffff880112d8
=> Loading section .dtors, size 0x8 lma ffffffff880112e0
=> Loading section .rdata, size 0x1d99 lma ffffffff880112f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013090
=> Loading section .data, size 0x468 lma ffffffff880130a8
=> Start address ffffffff88000004
=> Transfer rate: 632840 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[528/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:519 W:0 | mipstx39/jmr3904: sptls01.exe
Result: invalid
Time: 0:00:00.272106 sptls01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11060 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88011060
=> Loading section .init, size 0x48 lma ffffffff880110d0
=> Loading section .fini, size 0x30 lma ffffffff88011118
=> Loading section .ctors, size 0x8 lma ffffffff88011148
=> Loading section .dtors, size 0x8 lma ffffffff88011150
=> Loading section .rdata, size 0x1a59 lma ffffffff88011160
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012bc0
=> Loading section .tdata, size 0x1 lma ffffffff88012bd8
=> Loading section .data, size 0x460 lma ffffffff88012be0
=> Start address ffffffff88000004
=> Transfer rate: 622928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[529/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: sptls02.exe
Result: invalid
Time: 0:00:00.266961 sptls02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x2e62c lma ffffffff88000000
=> Loading section .rtemsroset, size 0x84 lma ffffffff8802e62c
=> Loading section .init, size 0x48 lma ffffffff8802e6b0
=> Loading section .fini, size 0x30 lma ffffffff8802e6f8
=> Loading section .ctors, size 0x18 lma ffffffff8802e728
=> Loading section .dtors, size 0x8 lma ffffffff8802e740
=> Loading section .rdata, size 0x4254 lma ffffffff8802e750
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880329a8
=> Loading section .rel.dyn, size 0x10 lma ffffffff880329c0
=> Loading section .tdata, size 0x114 lma ffffffff88032a00
=> Loading section .data, size 0x678 lma ffffffff88032c00
=> Loading section .sdata, size 0x4 lma ffffffff88033278
=> Start address ffffffff88000004
=> Transfer rate: 1673888 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[530/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: sptls03.exe
Result: invalid
Time: 0:00:00.275429 sptls03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x9ef0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88009ef0
=> Loading section .init, size 0x48 lma ffffffff88009f60
=> Loading section .fini, size 0x30 lma ffffffff88009fa8
=> Loading section .ctors, size 0x8 lma ffffffff88009fd8
=> Loading section .dtors, size 0x8 lma ffffffff88009fe0
=> Loading section .rdata, size 0x157c lma ffffffff88009ff0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800b570
=> Loading section .data, size 0x340 lma ffffffff8800b588
=> Start address ffffffff88000004
=> Transfer rate: 378336 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[531/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: sptls04.exe
Result: invalid
Time: 0:00:00.271164 sptls04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf860 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f860
=> Loading section .init, size 0x48 lma ffffffff8800f8d0
=> Loading section .fini, size 0x30 lma ffffffff8800f918
=> Loading section .ctors, size 0xc lma ffffffff8800f948
=> Loading section .dtors, size 0x8 lma ffffffff8800f954
=> Loading section .rdata, size 0x19a9 lma ffffffff8800f960
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011310
=> Loading section .data, size 0x448 lma ffffffff88011328
=> Start address ffffffff88000004
=> Transfer rate: 572200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[532/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: spversion01.exe
Result: invalid
Time: 0:00:00.274413 spversion01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xf900 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800f900
=> Loading section .init, size 0x48 lma ffffffff8800f970
=> Loading section .fini, size 0x30 lma ffffffff8800f9b8
=> Loading section .ctors, size 0x8 lma ffffffff8800f9e8
=> Loading section .dtors, size 0x8 lma ffffffff8800f9f0
=> Loading section .rdata, size 0x1a3d lma ffffffff8800fa00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011440
=> Loading section .data, size 0x448 lma ffffffff88011458
=> Start address ffffffff88000004
=> Transfer rate: 574632 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[533/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: spwatchdog.exe
Result: invalid
Time: 0:00:00.276873 spwatchdog.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13320 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013320
=> Loading section .init, size 0x48 lma ffffffff880133a0
=> Loading section .fini, size 0x30 lma ffffffff880133e8
=> Loading section .ctors, size 0x8 lma ffffffff88013418
=> Loading section .dtors, size 0x8 lma ffffffff88013420
=> Loading section .rdata, size 0x257c lma ffffffff88013430
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880159b0
=> Loading section .data, size 0x4d0 lma ffffffff880159c8
=> Start address ffffffff88000004
=> Transfer rate: 717920 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[534/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: spwkspace.exe
Result: invalid
Time: 0:00:00.273519 spwkspace.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff50 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff50
=> Loading section .init, size 0x48 lma ffffffff8800ffc0
=> Loading section .fini, size 0x30 lma ffffffff88010008
=> Loading section .ctors, size 0x8 lma ffffffff88010038
=> Loading section .dtors, size 0x8 lma ffffffff88010040
=> Loading section .rdata, size 0x1c35 lma ffffffff88010050
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c88
=> Loading section .data, size 0x448 lma ffffffff88011ca0
=> Start address ffffffff88000004
=> Transfer rate: 591592 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[535/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: tm01.exe
Result: invalid
Time: 0:00:00.270327 tm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10f30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010f30
=> Loading section .init, size 0x48 lma ffffffff88010fa0
=> Loading section .fini, size 0x30 lma ffffffff88010fe8
=> Loading section .ctors, size 0x8 lma ffffffff88011018
=> Loading section .dtors, size 0x8 lma ffffffff88011020
=> Loading section .rdata, size 0x1e91 lma ffffffff88011030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ec8
=> Loading section .data, size 0x480 lma ffffffff88012ee0
=> Start address ffffffff88000004
=> Transfer rate: 629384 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[536/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:527 W:0 | mipstx39/jmr3904: tm02.exe
Result: invalid
Time: 0:00:00.266274 tm02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1eb1 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012928
=> Loading section .data, size 0x480 lma ffffffff88012940
=> Start address ffffffff88000004
=> Transfer rate: 617864 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[537/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm03.exe
Result: invalid
Time: 0:00:00.266742 tm03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ea0
=> Loading section .init, size 0x48 lma ffffffff88010f10
=> Loading section .fini, size 0x30 lma ffffffff88010f58
=> Loading section .ctors, size 0x8 lma ffffffff88010f88
=> Loading section .dtors, size 0x8 lma ffffffff88010f90
=> Loading section .rdata, size 0x1e79 lma ffffffff88010fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e20
=> Loading section .data, size 0x480 lma ffffffff88012e38
=> Start address ffffffff88000004
=> Transfer rate: 628040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[538/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm04.exe
Result: invalid
Time: 0:00:00.270432 tm04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x125a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880125a0
=> Loading section .init, size 0x48 lma ffffffff88012610
=> Loading section .fini, size 0x30 lma ffffffff88012658
=> Loading section .ctors, size 0x8 lma ffffffff88012688
=> Loading section .dtors, size 0x8 lma ffffffff88012690
=> Loading section .rdata, size 0x20f1 lma ffffffff880126a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014798
=> Loading section .data, size 0x480 lma ffffffff880147b0
=> Start address ffffffff88000004
=> Transfer rate: 680200 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[539/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm05.exe
Result: invalid
Time: 0:00:00.269226 tm05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfe00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fe00
=> Loading section .init, size 0x48 lma ffffffff8800fe70
=> Loading section .fini, size 0x30 lma ffffffff8800feb8
=> Loading section .ctors, size 0x8 lma ffffffff8800fee8
=> Loading section .dtors, size 0x8 lma ffffffff8800fef0
=> Loading section .rdata, size 0x1e01 lma ffffffff8800ff00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d08
=> Loading section .data, size 0x450 lma ffffffff88011d20
=> Start address ffffffff88000004
=> Transfer rate: 592648 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[540/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm06.exe
Result: invalid
Time: 0:00:00.267241 tm06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x106b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880106b0
=> Loading section .init, size 0x48 lma ffffffff88010720
=> Loading section .fini, size 0x30 lma ffffffff88010768
=> Loading section .ctors, size 0x8 lma ffffffff88010798
=> Loading section .dtors, size 0x8 lma ffffffff880107a0
=> Loading section .rdata, size 0x1e79 lma ffffffff880107b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012630
=> Loading section .data, size 0x450 lma ffffffff88012648
=> Start address ffffffff88000004
=> Transfer rate: 611400 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[541/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm07.exe
Result: invalid
Time: 0:00:00.265724 tm07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10140 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010140
=> Loading section .init, size 0x48 lma ffffffff880101b0
=> Loading section .fini, size 0x30 lma ffffffff880101f8
=> Loading section .ctors, size 0x8 lma ffffffff88010228
=> Loading section .dtors, size 0x8 lma ffffffff88010230
=> Loading section .rdata, size 0x1dd9 lma ffffffff88010240
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012020
=> Loading section .data, size 0x450 lma ffffffff88012038
=> Start address ffffffff88000004
=> Transfer rate: 598984 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[542/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm08.exe
Result: invalid
Time: 0:00:00.267132 tm08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x115d0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880115d0
=> Loading section .init, size 0x48 lma ffffffff88011640
=> Loading section .fini, size 0x30 lma ffffffff88011688
=> Loading section .ctors, size 0x8 lma ffffffff880116b8
=> Loading section .dtors, size 0x8 lma ffffffff880116c0
=> Loading section .rdata, size 0x1fc9 lma ffffffff880116d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136a0
=> Loading section .data, size 0x480 lma ffffffff880136b8
=> Start address ffffffff88000004
=> Transfer rate: 645448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[543/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm09.exe
Result: invalid
Time: 0:00:00.281116 tm09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10e10 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010e10
=> Loading section .init, size 0x48 lma ffffffff88010e80
=> Loading section .fini, size 0x30 lma ffffffff88010ec8
=> Loading section .ctors, size 0x8 lma ffffffff88010ef8
=> Loading section .dtors, size 0x8 lma ffffffff88010f00
=> Loading section .rdata, size 0x1f09 lma ffffffff88010f10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e20
=> Loading section .data, size 0x480 lma ffffffff88012e38
=> Start address ffffffff88000004
=> Transfer rate: 628040 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[544/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:535 W:0 | mipstx39/jmr3904: tm10.exe
Result: invalid
Time: 0:00:00.268743 tm10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x107b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880107b0
=> Loading section .init, size 0x48 lma ffffffff88010820
=> Loading section .fini, size 0x30 lma ffffffff88010868
=> Loading section .ctors, size 0x8 lma ffffffff88010898
=> Loading section .dtors, size 0x8 lma ffffffff880108a0
=> Loading section .rdata, size 0x1e59 lma ffffffff880108b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012710
=> Loading section .data, size 0x480 lma ffffffff88012728
=> Start address ffffffff88000004
=> Transfer rate: 613576 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[545/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm11.exe
Result: invalid
Time: 0:00:00.269821 tm11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b30
=> Loading section .init, size 0x48 lma ffffffff88010ba0
=> Loading section .fini, size 0x30 lma ffffffff88010be8
=> Loading section .ctors, size 0x8 lma ffffffff88010c18
=> Loading section .dtors, size 0x8 lma ffffffff88010c20
=> Loading section .rdata, size 0x1e49 lma ffffffff88010c30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a80
=> Loading section .data, size 0x480 lma ffffffff88012a98
=> Start address ffffffff88000004
=> Transfer rate: 620616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[546/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm12.exe
Result: invalid
Time: 0:00:00.274857 tm12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b80
=> Loading section .init, size 0x48 lma ffffffff88010bf0
=> Loading section .fini, size 0x30 lma ffffffff88010c38
=> Loading section .ctors, size 0x8 lma ffffffff88010c68
=> Loading section .dtors, size 0x8 lma ffffffff88010c70
=> Loading section .rdata, size 0x1e49 lma ffffffff88010c80
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ad0
=> Loading section .data, size 0x480 lma ffffffff88012ae8
=> Start address ffffffff88000004
=> Transfer rate: 621256 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[547/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm13.exe
Result: invalid
Time: 0:00:00.268444 tm13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b30
=> Loading section .init, size 0x48 lma ffffffff88010ba0
=> Loading section .fini, size 0x30 lma ffffffff88010be8
=> Loading section .ctors, size 0x8 lma ffffffff88010c18
=> Loading section .dtors, size 0x8 lma ffffffff88010c20
=> Loading section .rdata, size 0x1e49 lma ffffffff88010c30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a80
=> Loading section .data, size 0x480 lma ffffffff88012a98
=> Start address ffffffff88000004
=> Transfer rate: 620616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[548/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm14.exe
Result: invalid
Time: 0:00:00.261084 tm14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10b70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010b70
=> Loading section .init, size 0x48 lma ffffffff88010be0
=> Loading section .fini, size 0x30 lma ffffffff88010c28
=> Loading section .ctors, size 0x8 lma ffffffff88010c58
=> Loading section .dtors, size 0x8 lma ffffffff88010c60
=> Loading section .rdata, size 0x1e49 lma ffffffff88010c70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ac0
=> Loading section .data, size 0x480 lma ffffffff88012ad8
=> Start address ffffffff88000004
=> Transfer rate: 621128 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[549/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm15.exe
Result: invalid
Time: 0:00:00.265657 tm15.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x102f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880102f0
=> Loading section .init, size 0x48 lma ffffffff88010360
=> Loading section .fini, size 0x30 lma ffffffff880103a8
=> Loading section .ctors, size 0x8 lma ffffffff880103d8
=> Loading section .dtors, size 0x8 lma ffffffff880103e0
=> Loading section .rdata, size 0x1ee9 lma ffffffff880103f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e0
=> Loading section .data, size 0x450 lma ffffffff880122f8
=> Start address ffffffff88000004
=> Transfer rate: 604616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[550/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm16.exe
Result: invalid
Time: 0:00:00.275154 tm16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x101b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880101b0
=> Loading section .init, size 0x48 lma ffffffff88010220
=> Loading section .fini, size 0x30 lma ffffffff88010268
=> Loading section .ctors, size 0x8 lma ffffffff88010298
=> Loading section .dtors, size 0x8 lma ffffffff880102a0
=> Loading section .rdata, size 0x1e21 lma ffffffff880102b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120d8
=> Loading section .data, size 0x450 lma ffffffff880120f0
=> Start address ffffffff88000004
=> Transfer rate: 600456 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[551/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm17.exe
Result: invalid
Time: 0:00:00.267473 tm17.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ff30
=> Loading section .init, size 0x48 lma ffffffff8800ffa0
=> Loading section .fini, size 0x30 lma ffffffff8800ffe8
=> Loading section .ctors, size 0x8 lma ffffffff88010018
=> Loading section .dtors, size 0x8 lma ffffffff88010020
=> Loading section .rdata, size 0x1de1 lma ffffffff88010030
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e18
=> Loading section .data, size 0x450 lma ffffffff88011e30
=> Start address ffffffff88000004
=> Transfer rate: 594824 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[552/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:543 W:0 | mipstx39/jmr3904: tm18.exe
Result: invalid
Time: 0:00:00.283961 tm18.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfba0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fba0
=> Loading section .init, size 0x48 lma ffffffff8800fc10
=> Loading section .fini, size 0x30 lma ffffffff8800fc58
=> Loading section .ctors, size 0x8 lma ffffffff8800fc88
=> Loading section .dtors, size 0x8 lma ffffffff8800fc90
=> Loading section .rdata, size 0x1dd1 lma ffffffff8800fca0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a78
=> Loading section .data, size 0x450 lma ffffffff88011a90
=> Start address ffffffff88000004
=> Transfer rate: 587400 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[553/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm19.exe
Result: invalid
Time: 0:00:00.269499 tm19.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10690 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010690
=> Loading section .init, size 0x48 lma ffffffff88010700
=> Loading section .fini, size 0x30 lma ffffffff88010748
=> Loading section .ctors, size 0x8 lma ffffffff88010778
=> Loading section .dtors, size 0x8 lma ffffffff88010780
=> Loading section .rdata, size 0x1f31 lma ffffffff88010790
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126c8
=> Loading section .data, size 0x450 lma ffffffff880126e0
=> Start address ffffffff88000004
=> Transfer rate: 612616 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[554/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm20.exe
Result: invalid
Time: 0:00:00.277026 tm20.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11d00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011d00
=> Loading section .init, size 0x48 lma ffffffff88011d80
=> Loading section .fini, size 0x30 lma ffffffff88011dc8
=> Loading section .ctors, size 0x8 lma ffffffff88011df8
=> Loading section .dtors, size 0x8 lma ffffffff88011e00
=> Loading section .rdata, size 0x21c9 lma ffffffff88011e10
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013fe0
=> Loading section .data, size 0x4c8 lma ffffffff88013ff8
=> Start address ffffffff88000004
=> Transfer rate: 664968 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[555/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm21.exe
Result: invalid
Time: 0:00:00.268382 tm21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x116c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff880116c0
=> Loading section .init, size 0x48 lma ffffffff88011750
=> Loading section .fini, size 0x30 lma ffffffff88011798
=> Loading section .ctors, size 0x8 lma ffffffff880117c8
=> Loading section .dtors, size 0x8 lma ffffffff880117d0
=> Loading section .rdata, size 0x1f99 lma ffffffff880117e0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013780
=> Loading section .data, size 0x5a0 lma ffffffff88013798
=> Start address ffffffff88000004
=> Transfer rate: 649544 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[556/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm22.exe
Result: invalid
Time: 0:00:00.275209 tm22.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10d30 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010d30
=> Loading section .init, size 0x48 lma ffffffff88010da0
=> Loading section .fini, size 0x30 lma ffffffff88010de8
=> Loading section .ctors, size 0x8 lma ffffffff88010e18
=> Loading section .dtors, size 0x8 lma ffffffff88010e20
=> Loading section .rdata, size 0x1f19 lma ffffffff88010e30
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d50
=> Loading section .data, size 0x480 lma ffffffff88012d68
=> Start address ffffffff88000004
=> Transfer rate: 626376 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[557/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm23.exe
Result: invalid
Time: 0:00:00.270117 tm23.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x118f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880118f0
=> Loading section .init, size 0x48 lma ffffffff88011960
=> Loading section .fini, size 0x30 lma ffffffff880119a8
=> Loading section .ctors, size 0x8 lma ffffffff880119d8
=> Loading section .dtors, size 0x8 lma ffffffff880119e0
=> Loading section .rdata, size 0x202d lma ffffffff880119f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a20
=> Loading section .data, size 0x4b0 lma ffffffff88013a38
=> Start address ffffffff88000004
=> Transfer rate: 653032 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[558/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm24.exe
Result: invalid
Time: 0:00:00.273934 tm24.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd00
=> Loading section .init, size 0x48 lma ffffffff8800fd70
=> Loading section .fini, size 0x30 lma ffffffff8800fdb8
=> Loading section .ctors, size 0x8 lma ffffffff8800fde8
=> Loading section .dtors, size 0x8 lma ffffffff8800fdf0
=> Loading section .rdata, size 0x1e29 lma ffffffff8800fe00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c30
=> Loading section .data, size 0x450 lma ffffffff88011c48
=> Start address ffffffff88000004
=> Transfer rate: 590920 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[559/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm25.exe
Result: invalid
Time: 0:00:00.276764 tm25.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10c00 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010c00
=> Loading section .init, size 0x48 lma ffffffff88010c70
=> Loading section .fini, size 0x30 lma ffffffff88010cb8
=> Loading section .ctors, size 0x8 lma ffffffff88010ce8
=> Loading section .dtors, size 0x8 lma ffffffff88010cf0
=> Loading section .rdata, size 0x1e3d lma ffffffff88010d00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b40
=> Loading section .data, size 0x490 lma ffffffff88012b58
=> Start address ffffffff88000004
=> Transfer rate: 622312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[560/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:551 W:0 | mipstx39/jmr3904: tm26.exe
Result: invalid
Time: 0:00:00.267776 tm26.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x19340 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88019340
=> Loading section .init, size 0x48 lma ffffffff880193b0
=> Loading section .fini, size 0x30 lma ffffffff880193f8
=> Loading section .ctors, size 0x8 lma ffffffff88019428
=> Loading section .dtors, size 0x8 lma ffffffff88019430
=> Loading section .rdata, size 0x2890 lma ffffffff88019440
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bcd0
=> Loading section .data, size 0x610 lma ffffffff8801bce8
=> Start address ffffffff88000004
=> Transfer rate: 923520 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[561/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm27.exe
Result: invalid
Time: 0:00:00.273882 tm27.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x114f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880114f0
=> Loading section .init, size 0x48 lma ffffffff88011560
=> Loading section .fini, size 0x30 lma ffffffff880115a8
=> Loading section .ctors, size 0x8 lma ffffffff880115d8
=> Loading section .dtors, size 0x8 lma ffffffff880115e0
=> Loading section .rdata, size 0x1f68 lma ffffffff880115f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013558
=> Loading section .data, size 0x450 lma ffffffff88013570
=> Start address ffffffff88000004
=> Transfer rate: 642496 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[562/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm28.exe
Result: invalid
Time: 0:00:00.274294 tm28.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xffd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800ffd0
=> Loading section .init, size 0x48 lma ffffffff88010040
=> Loading section .fini, size 0x30 lma ffffffff88010088
=> Loading section .ctors, size 0x8 lma ffffffff880100b8
=> Loading section .dtors, size 0x8 lma ffffffff880100c0
=> Loading section .rdata, size 0x1e41 lma ffffffff880100d0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f18
=> Loading section .data, size 0x480 lma ffffffff88011f30
=> Start address ffffffff88000004
=> Transfer rate: 597256 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[563/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm29.exe
Result: invalid
Time: 0:00:00.257956 tm29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10bf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010bf0
=> Loading section .init, size 0x48 lma ffffffff88010c60
=> Loading section .fini, size 0x30 lma ffffffff88010ca8
=> Loading section .ctors, size 0x8 lma ffffffff88010cd8
=> Loading section .dtors, size 0x8 lma ffffffff88010ce0
=> Loading section .rdata, size 0x1f61 lma ffffffff88010cf0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c58
=> Loading section .data, size 0x480 lma ffffffff88012c70
=> Start address ffffffff88000004
=> Transfer rate: 624392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[564/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm30.exe
Result: invalid
Time: 0:00:00.270866 tm30.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10100 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010100
=> Loading section .init, size 0x48 lma ffffffff88010170
=> Loading section .fini, size 0x30 lma ffffffff880101b8
=> Loading section .ctors, size 0x8 lma ffffffff880101e8
=> Loading section .dtors, size 0x8 lma ffffffff880101f0
=> Loading section .rdata, size 0x1e39 lma ffffffff88010200
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012040
=> Loading section .data, size 0x480 lma ffffffff88012058
=> Start address ffffffff88000004
=> Transfer rate: 599624 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[565/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm31.exe
Result: invalid
Time: 0:00:00.271883 tm31.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1ec1 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012938
=> Loading section .data, size 0x480 lma ffffffff88012950
=> Start address ffffffff88000004
=> Transfer rate: 617992 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[566/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm32.exe
Result: invalid
Time: 0:00:00.275273 tm32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ea0
=> Loading section .init, size 0x48 lma ffffffff88010f10
=> Loading section .fini, size 0x30 lma ffffffff88010f58
=> Loading section .ctors, size 0x8 lma ffffffff88010f88
=> Loading section .dtors, size 0x8 lma ffffffff88010f90
=> Loading section .rdata, size 0x1e89 lma ffffffff88010fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e30
=> Loading section .data, size 0x480 lma ffffffff88012e48
=> Start address ffffffff88000004
=> Transfer rate: 628168 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[567/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm33.exe
Result: invalid
Time: 0:00:00.267271 tm33.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1eb9 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012930
=> Loading section .data, size 0x480 lma ffffffff88012948
=> Start address ffffffff88000004
=> Transfer rate: 617928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[568/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:559 W:0 | mipstx39/jmr3904: tm34.exe
Result: invalid
Time: 0:00:00.272164 tm34.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ea0
=> Loading section .init, size 0x48 lma ffffffff88010f10
=> Loading section .fini, size 0x30 lma ffffffff88010f58
=> Loading section .ctors, size 0x8 lma ffffffff88010f88
=> Loading section .dtors, size 0x8 lma ffffffff88010f90
=> Loading section .rdata, size 0x1e89 lma ffffffff88010fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e30
=> Loading section .data, size 0x480 lma ffffffff88012e48
=> Start address ffffffff88000004
=> Transfer rate: 628168 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[569/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tm35.exe
Result: invalid
Time: 0:00:00.262910 tm35.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10970 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=> Loading section .init, size 0x48 lma ffffffff880109e0
=> Loading section .fini, size 0x30 lma ffffffff88010a28
=> Loading section .ctors, size 0x8 lma ffffffff88010a58
=> Loading section .dtors, size 0x8 lma ffffffff88010a60
=> Loading section .rdata, size 0x1ec1 lma ffffffff88010a70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012938
=> Loading section .data, size 0x480 lma ffffffff88012950
=> Start address ffffffff88000004
=> Transfer rate: 617992 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[570/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tm36.exe
Result: invalid
Time: 0:00:00.260092 tm36.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10ea0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff88010ea0
=> Loading section .init, size 0x48 lma ffffffff88010f10
=> Loading section .fini, size 0x30 lma ffffffff88010f58
=> Loading section .ctors, size 0x8 lma ffffffff88010f88
=> Loading section .dtors, size 0x8 lma ffffffff88010f90
=> Loading section .rdata, size 0x1e89 lma ffffffff88010fa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e30
=> Loading section .data, size 0x480 lma ffffffff88012e48
=> Start address ffffffff88000004
=> Transfer rate: 628168 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[571/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tmck.exe
Result: invalid
Time: 0:00:00.272439 tmck.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xfd90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800fd90
=> Loading section .init, size 0x48 lma ffffffff8800fe00
=> Loading section .fini, size 0x30 lma ffffffff8800fe48
=> Loading section .ctors, size 0x8 lma ffffffff8800fe78
=> Loading section .dtors, size 0x8 lma ffffffff8800fe80
=> Loading section .rdata, size 0x1f15 lma ffffffff8800fe90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011da8
=> Loading section .data, size 0x450 lma ffffffff88011dc0
=> Start address ffffffff88000004
=> Transfer rate: 593960 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[572/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tmcontext01.exe
Result: invalid
Time: 0:00:00.262340 tmcontext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x108f0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff880108f0
=> Loading section .init, size 0x48 lma ffffffff88010960
=> Loading section .fini, size 0x30 lma ffffffff880109a8
=> Loading section .ctors, size 0x8 lma ffffffff880109d8
=> Loading section .dtors, size 0x8 lma ffffffff880109e0
=> Loading section .rdata, size 0x1ad9 lma ffffffff880109f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124d0
=> Loading section .data, size 0x450 lma ffffffff880124e8
=> Start address ffffffff88000004
=> Transfer rate: 608584 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[573/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tmfine01.exe
Result: invalid
Time: 0:00:00.257690 tmfine01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15190 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015190
=> Loading section .init, size 0x48 lma ffffffff88015210
=> Loading section .fini, size 0x30 lma ffffffff88015258
=> Loading section .ctors, size 0x8 lma ffffffff88015288
=> Loading section .dtors, size 0x8 lma ffffffff88015290
=> Loading section .rdata, size 0x1ca5 lma ffffffff880152a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016f48
=> Loading section .data, size 0x4f0 lma ffffffff88016f60
=> Start address ffffffff88000004
=> Transfer rate: 762408 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[574/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tmonetoone.exe
Result: invalid
Time: 0:00:00.265671 tmonetoone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12330 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012330
=> Loading section .init, size 0x48 lma ffffffff880123b0
=> Loading section .fini, size 0x30 lma ffffffff880123f8
=> Loading section .ctors, size 0x8 lma ffffffff88012428
=> Loading section .dtors, size 0x8 lma ffffffff88012430
=> Loading section .rdata, size 0x1abd lma ffffffff88012440
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f00
=> Loading section .data, size 0x490 lma ffffffff88013f18
=> Start address ffffffff88000004
=> Transfer rate: 662760 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[575/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: tmtimer01.exe
Result: invalid
Time: 0:00:00.274921 tmtimer01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x112a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880112a0
=> Loading section .init, size 0x48 lma ffffffff88011320
=> Loading section .fini, size 0x30 lma ffffffff88011368
=> Loading section .ctors, size 0x8 lma ffffffff88011398
=> Loading section .dtors, size 0x8 lma ffffffff880113a0
=> Loading section .rdata, size 0x1b1c lma ffffffff880113b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ed0
=> Loading section .data, size 0x490 lma ffffffff88012ee8
=> Start address ffffffff88000004
=> Transfer rate: 629600 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[576/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:567 W:0 | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid
Time: 0:00:00.272507 ts-unit-no-clock-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xff90 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800ff90
=> Loading section .init, size 0x48 lma ffffffff88010010
=> Loading section .fini, size 0x30 lma ffffffff88010058
=> Loading section .ctors, size 0x8 lma ffffffff88010088
=> Loading section .dtors, size 0x8 lma ffffffff88010090
=> Loading section .rdata, size 0x497c lma ffffffff880100a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a20
=> Loading section .data, size 0x254 lma ffffffff88014a38
=> Start address ffffffff88000004
=> Transfer rate: 680960 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[577/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid
Time: 0:00:00.270148 ts-fatal-init-task-construct-failed.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xd8b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800d8b0
=> Loading section .init, size 0x48 lma ffffffff8800d930
=> Loading section .fini, size 0x30 lma ffffffff8800d978
=> Loading section .ctors, size 0x8 lma ffffffff8800d9a8
=> Loading section .dtors, size 0x8 lma ffffffff8800d9b0
=> Loading section .rdata, size 0x18d4 lma ffffffff8800d9c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800f298
=> Loading section .data, size 0x238 lma ffffffff8800f2b0
=> Start address ffffffff88000004
=> Transfer rate: 501472 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[578/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid
Time: 0:00:00.268522 ts-fatal-too-large-tls-size.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xabf0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800abf0
=> Loading section .init, size 0x48 lma ffffffff8800ac70
=> Loading section .fini, size 0x30 lma ffffffff8800acb8
=> Loading section .ctors, size 0x8 lma ffffffff8800ace8
=> Loading section .dtors, size 0x8 lma ffffffff8800acf0
=> Loading section .rdata, size 0x1850 lma ffffffff8800ad00
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800c550
=> Loading section .data, size 0x210 lma ffffffff8800c568
=> Start address ffffffff88000004
=> Transfer rate: 408448 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[579/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid
Time: 0:00:00.269957 ts-performance-no-clock-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x17fc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xa0 lma ffffffff88017fc0
=> Loading section .init, size 0x48 lma ffffffff88018060
=> Loading section .fini, size 0x30 lma ffffffff880180a8
=> Loading section .ctors, size 0x8 lma ffffffff880180d8
=> Loading section .dtors, size 0x8 lma ffffffff880180e0
=> Loading section .rdata, size 0x2744 lma ffffffff880180f0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a838
=> Loading section .data, size 0x3d0 lma ffffffff8801a850
=> Start address ffffffff88000004
=> Transfer rate: 876704 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[580/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-terminate.exe
Result: invalid
Time: 0:00:00.305128 ts-terminate.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x117a0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff880117a0
=> Loading section .init, size 0x48 lma ffffffff88011820
=> Loading section .fini, size 0x30 lma ffffffff88011868
=> Loading section .ctors, size 0x8 lma ffffffff88011898
=> Loading section .dtors, size 0x8 lma ffffffff880118a0
=> Loading section .rdata, size 0x1ee8 lma ffffffff880118b0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013798
=> Loading section .data, size 0x22c lma ffffffff880137b0
=> Start address ffffffff88000004
=> Transfer rate: 642720 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[581/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-userext.exe
Result: invalid
Time: 0:00:00.268410 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13050 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013050
=> Loading section .init, size 0x48 lma ffffffff880130d0
=> Loading section .fini, size 0x30 lma ffffffff88013118
=> Loading section .ctors, size 0x8 lma ffffffff88013148
=> Loading section .dtors, size 0x8 lma ffffffff88013150
=> Loading section .rdata, size 0x2110 lma ffffffff88013160
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015270
=> Loading section .data, size 0x274 lma ffffffff88015288
=> Start address ffffffff88000004
=> Transfer rate: 698272 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[582/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid
Time: 0:00:00.269427 ts-validation-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x15370 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88015370
=> Loading section .init, size 0x48 lma ffffffff880153f0
=> Loading section .fini, size 0x30 lma ffffffff88015438
=> Loading section .ctors, size 0x8 lma ffffffff88015468
=> Loading section .dtors, size 0x8 lma ffffffff88015470
=> Loading section .rdata, size 0x2444 lma ffffffff88015480
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880178c8
=> Loading section .data, size 0x384 lma ffffffff880178e0
=> Start address ffffffff88000004
=> Transfer rate: 778944 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[583/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid
Time: 0:00:00.272501 ts-validation-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12bc0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012bc0
=> Loading section .init, size 0x48 lma ffffffff88012c40
=> Loading section .fini, size 0x30 lma ffffffff88012c88
=> Loading section .ctors, size 0x8 lma ffffffff88012cb8
=> Loading section .dtors, size 0x8 lma ffffffff88012cc0
=> Loading section .rdata, size 0xe3d4 lma ffffffff88012cd0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880210a8
=> Loading section .data, size 0x274 lma ffffffff880210c0
=> Start address ffffffff88000004
=> Transfer rate: 1087808 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[584/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:575 W:0 | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid
Time: 0:00:00.270134 ts-validation-acfg-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xe9c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x90 lma ffffffff8800e9c0
=> Loading section .init, size 0x48 lma ffffffff8800ea50
=> Loading section .fini, size 0x30 lma ffffffff8800ea98
=> Loading section .ctors, size 0x8 lma ffffffff8800eac8
=> Loading section .dtors, size 0x8 lma ffffffff8800ead0
=> Loading section .rdata, size 0x1c70 lma ffffffff8800eae0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010750
=> Loading section .data, size 0x338 lma ffffffff88010768
=> Start address ffffffff88000004
=> Transfer rate: 545984 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[585/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid
Time: 0:00:00.271696 ts-validation-acfg-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xd5c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x70 lma ffffffff8800d5c0
=> Loading section .init, size 0x48 lma ffffffff8800d630
=> Loading section .fini, size 0x30 lma ffffffff8800d678
=> Loading section .ctors, size 0x8 lma ffffffff8800d6a8
=> Loading section .dtors, size 0x8 lma ffffffff8800d6b0
=> Loading section .rdata, size 0x1858 lma ffffffff8800d6c0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800ef18
=> Loading section .data, size 0x1d8 lma ffffffff8800ef30
=> Start address ffffffff88000004
=> Transfer rate: 493568 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[586/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid
Time: 0:00:00.272839 ts-validation-cache.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11520 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011520
=> Loading section .init, size 0x48 lma ffffffff880115a0
=> Loading section .fini, size 0x30 lma ffffffff880115e8
=> Loading section .ctors, size 0x8 lma ffffffff88011618
=> Loading section .dtors, size 0x8 lma ffffffff88011620
=> Loading section .rdata, size 0x1d70 lma ffffffff88011630
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133a0
=> Loading section .data, size 0x260 lma ffffffff880133b8
=> Start address ffffffff88000004
=> Transfer rate: 635008 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[587/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid
Time: 0:00:00.263698 ts-validation-intr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x179e0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xb0 lma ffffffff880179e0
=> Loading section .init, size 0x48 lma ffffffff88017a90
=> Loading section .fini, size 0x30 lma ffffffff88017ad8
=> Loading section .ctors, size 0x8 lma ffffffff88017b08
=> Loading section .dtors, size 0x8 lma ffffffff88017b10
=> Loading section .rdata, size 0x4394 lma ffffffff88017b20
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801beb8
=> Loading section .data, size 0x41c lma ffffffff8801bed0
=> Start address ffffffff88000004
=> Transfer rate: 923392 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[588/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid
Time: 0:00:00.267657 ts-validation-io-kernel.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x99b0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x60 lma ffffffff880099b0
=> Loading section .init, size 0x48 lma ffffffff88009a10
=> Loading section .fini, size 0x30 lma ffffffff88009a58
=> Loading section .ctors, size 0x8 lma ffffffff88009a88
=> Loading section .dtors, size 0x8 lma ffffffff88009a90
=> Loading section .rdata, size 0x173c lma ffffffff88009aa0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800b1e0
=> Loading section .data, size 0x88 lma ffffffff8800b1f8
=> Start address ffffffff88000004
=> Transfer rate: 365472 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[589/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid
Time: 0:00:00.270388 ts-validation-no-clock-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x4a3c0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x250 lma ffffffff8804a3c0
=> Loading section .init, size 0x48 lma ffffffff8804a610
=> Loading section .fini, size 0x30 lma ffffffff8804a658
=> Loading section .ctors, size 0x8 lma ffffffff8804a688
=> Loading section .dtors, size 0x8 lma ffffffff8804a690
=> Loading section .rdata, size 0x19ba4 lma ffffffff8804a6a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88064248
=> Loading section .data, size 0x1364 lma ffffffff88064260
=> Loading section .rtemsrwset, size 0x4 lma ffffffff880655c4
=> Start address ffffffff88000004
=> Transfer rate: 3321312 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[590/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid
Time: 0:00:00.273776 ts-validation-non-smp.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10dd0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010dd0
=> Loading section .init, size 0x48 lma ffffffff88010e50
=> Loading section .fini, size 0x30 lma ffffffff88010e98
=> Loading section .ctors, size 0x8 lma ffffffff88010ec8
=> Loading section .dtors, size 0x8 lma ffffffff88010ed0
=> Loading section .rdata, size 0x1de8 lma ffffffff88010ee0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cc8
=> Loading section .data, size 0x270 lma ffffffff88012ce0
=> Start address ffffffff88000004
=> Transfer rate: 621120 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[591/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid
Time: 0:00:00.272909 ts-validation-one-cpu-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x1be70 lma ffffffff88000000
=> Loading section .rtemsroset, size 0xc0 lma ffffffff8801be70
=> Loading section .init, size 0x48 lma ffffffff8801bf30
=> Loading section .fini, size 0x30 lma ffffffff8801bf78
=> Loading section .ctors, size 0x8 lma ffffffff8801bfa8
=> Loading section .dtors, size 0x8 lma ffffffff8801bfb0
=> Loading section .rdata, size 0x5f60 lma ffffffff8801bfc0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021f20
=> Loading section .data, size 0x490 lma ffffffff88021f38
=> Start address ffffffff88000004
=> Transfer rate: 1121792 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[592/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:583 W:0 | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid
Time: 0:00:00.276696 ts-validation-one-cpu-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x11570 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88011570
=> Loading section .init, size 0x48 lma ffffffff880115f0
=> Loading section .fini, size 0x30 lma ffffffff88011638
=> Loading section .ctors, size 0x8 lma ffffffff88011668
=> Loading section .dtors, size 0x8 lma ffffffff88011670
=> Loading section .rdata, size 0xe3cc lma ffffffff88011680
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801fa50
=> Loading section .data, size 0x258 lma ffffffff8801fa68
=> Start address ffffffff88000004
=> Transfer rate: 1041824 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[593/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:591 W:0 | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid
Time: 0:00:00.274157 ts-validation-timecounter-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x12590 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88012590
=> Loading section .init, size 0x48 lma ffffffff88012610
=> Loading section .fini, size 0x30 lma ffffffff88012658
=> Loading section .ctors, size 0x8 lma ffffffff88012688
=> Loading section .dtors, size 0x8 lma ffffffff88012690
=> Loading section .rdata, size 0x23dc lma ffffffff880126a0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a80
=> Loading section .data, size 0x254 lma ffffffff88014a98
=> Start address ffffffff88000004
=> Transfer rate: 681728 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[594/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:591 W:0 | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid
Time: 0:00:00.275704 ts-validation-timecounter-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x13d60 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88013d60
=> Loading section .init, size 0x48 lma ffffffff88013de0
=> Loading section .fini, size 0x30 lma ffffffff88013e28
=> Loading section .ctors, size 0x8 lma ffffffff88013e58
=> Loading section .dtors, size 0x8 lma ffffffff88013e60
=> Loading section .rdata, size 0x1e78 lma ffffffff88013e70
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015ce8
=> Loading section .data, size 0x30c lma ffffffff88015d00
=> Start address ffffffff88000004
=> Transfer rate: 720928 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[595/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:591 W:0 | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid
Time: 0:00:00.273758 ts-validation-tls-0.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0x10da0 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff88010da0
=> Loading section .init, size 0x48 lma ffffffff88010e20
=> Loading section .fini, size 0x30 lma ffffffff88010e68
=> Loading section .ctors, size 0x8 lma ffffffff88010e98
=> Loading section .dtors, size 0x8 lma ffffffff88010ea0
=> Loading section .rdata, size 0x1d84 lma ffffffff88010eb0
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c38
=> Loading section .tdata, size 0x10 lma ffffffff88012d00
=> Loading section .data, size 0x260 lma ffffffff88012e00
=> Start address ffffffff88000004
=> Transfer rate: 619936 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
[596/596] p:1 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:591 W:0 | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid
Time: 0:00:00.271413 ts-validation-tls-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=> Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe...
=> target sim --board=jmr3904
=> Connected to the simulator.
=> load
=> Loading section .text, size 0xab80 lma ffffffff88000000
=> Loading section .rtemsroset, size 0x80 lma ffffffff8800ab80
=> Loading section .init, size 0x48 lma ffffffff8800ac00
=> Loading section .fini, size 0x30 lma ffffffff8800ac48
=> Loading section .ctors, size 0x8 lma ffffffff8800ac78
=> Loading section .dtors, size 0x8 lma ffffffff8800ac80
=> Loading section .rdata, size 0x1894 lma ffffffff8800ac90
=> Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800c528
=> Loading section .tdata, size 0x10 lma ffffffff8800c600
=> Loading section .data, size 0x218 lma ffffffff8800c700
=> Start address ffffffff88000004
=> Transfer rate: 408288 bits in <1 sec.
=> run
=> Starting program: /usr/home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=> mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=> Program
=> received signal SIGBUS, Bus error.
=> _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=> 57 bal $LF1
Passed: 1
Failed: 0
User Input: 0
Expected Fail: 0
Indeterminate: 0
Benchmark: 0
Timeout: 0
Test too long: 0
Invalid: 595
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 596
Invalid:
linpack.exe
whetstone.exe
fsdosfsformat01.exe
fsdosfsname02.exe
fsbdpart01.exe
dhrystone.exe
fsdosfsname01.exe
fsclose01.exe
fsdosfswrite01.exe
fsfseeko01.exe
fsdosfssync01.exe
fsimfsconfig03.exe
fsimfsconfig02.exe
fsimfsconfig01.exe
fsimfsgeneric01.exe
fsjffs2gc01.exe
fsrfsbitmap01.exe
fsnofs01.exe
fsrofs01.exe
imfs_fslink.exe
imfs_fsrdwr.exe
imfs_fspatheval.exe
imfs_fserror.exe
imfs_fspermission.exe
jffs2_fserror.exe
imfs_fsscandir01.exe
jffs2_fspermission.exe
jffs2_fslink.exe
imfs_fssymlink.exe
jffs2_fspatheval.exe
imfs_fstime.exe
jffs2_fsrdwr.exe
jffs2_fssymlink.exe
mdosfs_fsrdwr.exe
mdosfs_fspatheval.exe
jffs2_fstime.exe
jffs2_fsscandir01.exe
mdosfs_fsstatvfs.exe
mdosfs_fserror.exe
mdosfs_fsscandir01.exe
mdosfs_fstime.exe
mimfs_fserror.exe
mimfs_fsscandir01.exe
mimfs_fsrdwr.exe
mimfs_fspermission.exe
mimfs_fsrename.exe
mimfs_fslink.exe
mimfs_fspatheval.exe
mimfs_fssymlink.exe
mrfs_fserror.exe
mimfs_fstime.exe
mrfs_fsfpathconf.exe
mrfs_fslink.exe
mrfs_fspermission.exe
mrfs_fsrdwr.exe
mrfs_fspatheval.exe
block04.exe
block03.exe
block01.exe
mrfs_fsrename.exe
mrfs_fstime.exe
mrfs_fssymlink.exe
mrfs_fsscandir01.exe
block02.exe
block05.exe
block10.exe
block09.exe
block08.exe
block06.exe
block07.exe
block11.exe
block12.exe
block16.exe
block13.exe
block14.exe
bspcmdline01.exe
block17.exe
block15.exe
complex.exe
capture01.exe
dl01.exe
defaultconfig01.exe
crypt01.exe
cpuuse.exe
devfs01.exe
devnullfatal01.exe
deviceio01.exe
devfs04.exe
dl05.exe
dl04.exe
dl09.exe
dl08.exe
dl02.exe
dl07.exe
dl03.exe
dl06.exe
dl10.exe
dumpbuf01.exe
heapwalk.exe
exit01.exe
exit03.exe
exit02.exe
flashdisk01.exe
getentropy01.exe
i2c01.exe
malloc04.exe
malloc02.exe
math.exe
malloctest.exe
irqs01.exe
malloc03.exe
libfdt01.exe
mathl.exe
md501.exe
newlib01.exe
mathf.exe
monitor02.exe
monitor.exe
mouse01.exe
ofw01.exe
rtmonuse.exe
rbheap01.exe
record01.exe
rcxx01.exe
putenvtest.exe
pwdgrp01.exe
pwdgrp02.exe
record02.exe
sparsedisk01.exe
spi01.exe
stackchk.exe
sha.exe
shell01.exe
stackchk02.exe
stringto01.exe
stackchk01.exe
tar01.exe
termios.exe
tar03.exe
termios01.exe
termios03.exe
tar02.exe
termios04.exe
termios02.exe
termios07.exe
termios08.exe
termios06.exe
termios11.exe
termios10.exe
termios09.exe
termios05.exe
top.exe
psx01.exe
psx02.exe
tztest.exe
ttest02.exe
uid01.exe
ttest01.exe
utf8proc01.exe
psx03.exe
psx09.exe
psx04.exe
psx05.exe
psx11.exe
psx08.exe
psx07.exe
psx06.exe
psx10.exe
psx14.exe
psx16.exe
psxaio03.exe
psx13.exe
psx12.exe
psxaio02.exe
psxaio01.exe
psx15.exe
psxautoinit01.exe
psxalarm01.exe
psxbarrier01.exe
psxchroot01.exe
psxautoinit02.exe
psxclassic01.exe
psxcancel.exe
psxcancel01.exe
psxcleanup01.exe
psxconcurrency01.exe
psxcleanup.exe
psxcond01.exe
psxclock01.exe
psxclockrealtime01.exe
psxcleanup02.exe
psxclock.exe
psxcond02.exe
psxconfig01.exe
psxenosys.exe
psxfatal02.exe
psxfatal01.exe
psxeintr_join.exe
psxconfstr.exe
psxdevctl01.exe
psxfchx01.exe
psxfile01.exe
psxfenv01.exe
psxfile02.exe
psxgetattrnp01.exe
psxgetrusage01.exe
psxfilelock01.exe
psxftw01.exe
psxinttypes01.exe
psxitimer.exe
psxkey01.exe
psxglobalcon01.exe
psximfs02.exe
psxglobalcon02.exe
psximfs01.exe
psxid01.exe
psxkey02.exe
psxkey08.exe
psxkey04.exe
psxkey03.exe
psxkey07.exe
psxkey05.exe
psxkey09.exe
psxkey06.exe
psxkey10.exe
psxmutexattr01.exe
psxmsgq03.exe
psxmsgq04.exe
psxmsgq02.exe
psxmmap01.exe
psxmsgq01.exe
psxmount.exe
psxonce01.exe
psxpasswd02.exe
psxndbm01.exe
psxreaddir.exe
psxpipe01.exe
psxobj01.exe
psxrdwrv.exe
psxpasswd01.exe
psxshm02.exe
psxsignal04.exe
psxrwlock01.exe
psxsignal01.exe
psxsignal02.exe
psxsignal03.exe
psxshm01.exe
psxsem01.exe
psxsignal08.exe
psxsignal06.exe
psxstat.exe
psxsignal05.exe
psxsignal07.exe
psxstack02.exe
psxspin01.exe
psxstack01.exe
psxtimes01.exe
psxtimer01.exe
psxsysconf.exe
psxualarm.exe
psxstrsignal01.exe
psxtime.exe
psxtimer02.exe
psxthreadname01.exe
psxtmbarrier03.exe
psxtmcleanup01.exe
psxusleep.exe
psxtmclocknanosleep01.exe
psxtmbarrier01.exe
psxtmbarrier02.exe
psxtmbarrierattr01.exe
psxtmbarrier04.exe
psxtmclocknanosleep03.exe
psxtmcond04.exe
psxtmclocknanosleep02.exe
psxtmcond01.exe
psxtmcond06.exe
psxtmcond05.exe
psxtmcond02.exe
psxtmcond03.exe
psxtmcond08.exe
psxtmkey01.exe
psxtmcond09.exe
psxtmkey02.exe
psxtmcond10.exe
psxtmcond07.exe
psxtmmqrcvblock01.exe
psxtmmq01.exe
psxtmmutex04.exe
psxtmmutex06.exe
psxtmmutex02.exe
psxtmmutex05.exe
psxtmmutex01.exe
psxtmmutex03.exe
psxtmmutex07.exe
psxtmmqrcvblock02.exe
psxtmnanosleep02.exe
psxtmonce01.exe
psxtmrwlock01.exe
psxtmnanosleep01.exe
psxtmrwlock03.exe
psxtmrwlock02.exe
psxtmmutexattr01.exe
psxtmrwlock04.exe
psxtmrwlock07.exe
psxtmrwlock06.exe
psxtmsem04.exe
psxtmsem03.exe
psxtmsem01.exe
psxtmsem05.exe
psxtmsem02.exe
psxtmrwlock05.exe
psxtmthread01.exe
psxtmsleep01.exe
psxtmthread05.exe
psxtmthread02.exe
psxtmthread03.exe
psxtmthread04.exe
psxtmsleep02.exe
psxtmthread06.exe
rhmlatency.exe
rhilatency.exe
psxtmthreadattr01.exe
rhtaskswitch.exe
rhdeadlockbrk.exe
rhsemshuffle.exe
base_sp.exe
rhtaskpreempt.exe
capture.exe
paranoia.exe
cdtest.exe
fileio.exe
hello.exe
nsecs.exe
iostream.exe
sp01.exe
sp03.exe
ticker.exe
sp04.exe
sp05.exe
unlimited.exe
sp02.exe
sp06.exe
sp07.exe
sp14.exe
sp13.exe
sp16.exe
sp08.exe
sp12.exe
sp11.exe
sp15.exe
sp18.exe
sp2038.exe
sp21.exe
sp22.exe
sp17.exe
sp23.exe
sp20.exe
sp19.exe
sp26.exe
sp29.exe
sp31.exe
sp25.exe
sp24.exe
sp27.exe
sp30.exe
sp27a.exe
sp34.exe
sp35.exe
sp37.exe
sp38.exe
sp41.exe
sp33.exe
sp40.exe
sp32.exe
sp47.exe
sp43.exe
sp42.exe
sp44.exe
sp49.exe
sp48.exe
sp45.exe
sp46.exe
sp51.exe
sp52.exe
sp50.exe
sp54.exe
sp55.exe
sp57.exe
sp56.exe
sp53.exe
sp58.exe
sp59.exe
sp60.exe
sp62.exe
sp66.exe
sp65.exe
sp64.exe
sp63.exe
sp68.exe
sp74.exe
sp67.exe
sp69.exe
sp71.exe
sp72.exe
sp70.exe
sp73.exe
sp75.exe
spatomic01.exe
spassoc01.exe
sp77.exe
sp76.exe
spcbssched01.exe
spcache01.exe
spcbssched02.exe
spclock_err02.exe
spconfig02.exe
spconfig01.exe
spconsole01.exe
spclock_err01.exe
spchain.exe
spcbssched03.exe
spclock_todhook01.exe
spedfsched02.exe
spedfsched01.exe
spcxx01.exe
spedfsched04.exe
spcontext01.exe
spcpucounter01.exe
spcpuset01.exe
spedfsched03.exe
sperror02.exe
spfatal01.exe
spevent_err03.exe
sperror01.exe
speventsystem01.exe
sperror03.exe
spextensions01.exe
speventtransient01.exe
spfatal05.exe
spfatal09.exe
spfatal11.exe
spfatal10.exe
spfatal14.exe
spfatal04.exe
spfatal03.exe
spfatal12.exe
spfatal33.exe
spfatal29.exe
spfatal32.exe
spfatal34.exe
spfatal30.exe
spfatal28.exe
spfatal15.exe
spfatal31.exe
spfifo03.exe
spfifo01.exe
spglobalcon01.exe
spfifo05.exe
spglobalcon02.exe
spfifo04.exe
spfifo02.exe
spfreechain01.exe
spintr_err01.exe
spmisc01.exe
spinternalerror02.exe
spinternalerror01.exe
spmkdir.exe
splinkersets01.exe
spmountmgr01.exe
spheapprot.exe
sppagesize.exe
spmsgq_err01.exe
spntp01.exe
spobjgetnext.exe
spmrsp01.exe
spmutex01.exe
spnsext01.exe
spmsgq_err02.exe
spport_err01.exe
spprofiling01.exe
sppercpudata01.exe
spqreslib.exe
spprivenv01.exe
sppartition_err01.exe
spprintk.exe
sppps01.exe
spsem02.exe
spregion_err01.exe
sprbtree01.exe
spratemon_err01.exe
sprmsched01.exe
spsem01.exe
spscheduler01.exe
sprmsched02.exe
spsem03.exe
spsize.exe
spsem_err01.exe
spsignal_err01.exe
spsimplesched01.exe
spsem_err02.exe
spsimplesched03.exe
spsimplesched02.exe
spsysinit01.exe
spstkalloc.exe
spstkalloc03.exe
spstdthreads01.exe
spsyslock01.exe
sptask_err01.exe
spstkalloc04.exe
spstkalloc02.exe
sptask_err04.exe
sptask_err03.exe
sptask_err02.exe
spthreadlife01.exe
spthreadq01.exe
spthread01.exe
sptasknopreempt01.exe
sptimecounter01.exe
sptimer_err02.exe
sptimer_err01.exe
sptimecounter02.exe
sptimerserver01.exe
sptimecounter03.exe
sptls01.exe
sptimespec01.exe
sptimecounter04.exe
sptls03.exe
tm01.exe
spversion01.exe
sptls04.exe
sptls02.exe
spwatchdog.exe
spwkspace.exe
tm02.exe
tm08.exe
tm09.exe
tm05.exe
tm06.exe
tm07.exe
tm04.exe
tm10.exe
tm03.exe
tm13.exe
tm14.exe
tm18.exe
tm12.exe
tm11.exe
tm16.exe
tm17.exe
tm15.exe
tm19.exe
tm25.exe
tm22.exe
tm24.exe
tm23.exe
tm21.exe
tm26.exe
tm20.exe
tm34.exe
tm31.exe
tm28.exe
tm30.exe
tm29.exe
tm32.exe
tm27.exe
tm33.exe
tmck.exe
tmtimer01.exe
tmonetoone.exe
tm35.exe
tm36.exe
tmfine01.exe
ts-unit-no-clock-0.exe
tmcontext01.exe
ts-fatal-too-large-tls-size.exe
ts-performance-no-clock-0.exe
ts-validation-1.exe
ts-validation-acfg-0.exe
ts-userext.exe
ts-fatal-init-task-construct-failed.exe
ts-terminate.exe
ts-validation-0.exe
ts-validation-acfg-1.exe
ts-validation-io-kernel.exe
ts-validation-one-cpu-0.exe
ts-validation-intr.exe
ts-validation-one-cpu-1.exe
ts-validation-cache.exe
ts-validation-no-clock-0.exe
ts-validation-non-smp.exe
ts-validation-timecounter-1.exe
ts-validation-timecounter-0.exe
ts-validation-tls-0.exe
ts-validation-tls-1.exe
Average test time: 0:00:00.070725
Testing time : 0:00:42.151956
More information about the build
mailing list