[rtems-test] mipstx39/jmr3904: : Passed:1 Failed:0 Timeout:0 Test-Too-long:0 Invalid:596 Wrong:0

Mon Jun 27 16:28:31 UTC 2022

Testing time     : 0:00:43.609716
Average test time: 0:00:00.073048

Host
====
Linux-3.10.0-1160.42.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.42.2.el7.x86_64 #1 SMP Tue Sep 7 14:49:57 UTC 2021 x86_64 x86_64)

Configuration
=============
Version: Not present in test
Build  : Not present in test
Tools  : Not present in test

Summary
=======

Passed:          1
Failed:          0
User Input:      0
Expected Fail:   0
Indeterminate:   0
Benchmark:       0
Timeout:         0
Test too long:   0
Invalid:       596
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         597

Invalid:
 sptasknopreempt01.exe
 block05.exe
 block15.exe
 sp08.exe
 paranoia.exe
 psxkey09.exe
 whetstone.exe
 psxtmrwlock01.exe
 termios.exe
 fsdosfsname02.exe
 psx13.exe
 spversion01.exe
 spclock_err02.exe
 mrfs_fsrename.exe
 block16.exe
 mimfs_fspermission.exe
 mdosfs_fserror.exe
 sptimer_err02.exe
 termios06.exe
 sp32.exe
 psxglobalcon02.exe
 tar01.exe
 spfatal10.exe
 heapwalk.exe
 psxclock01.exe
 sp71.exe
 psxtmmutex07.exe
 ts-userext.exe
 psxkey10.exe
 ts-validation-timecounter-1.exe
 psxtmcond02.exe
 tm31.exe
 tftpfs.exe
 psxcond01.exe
 block13.exe
 tm27.exe
 psxclockrealtime01.exe
 psxautoinit01.exe
 sp47.exe
 mdosfs_fsstatvfs.exe
 jffs2_fstime.exe
 psxtmcond06.exe
 ts-validation-acfg-0.exe
 imfs_fslink.exe
 sp74.exe
 mrfs_fstime.exe
 spcbssched02.exe
 sptimespec01.exe
 sparsedisk01.exe
 tm19.exe
 psxualarm.exe
 psxtmthread01.exe
 tm06.exe
 rbheap01.exe
 spconfig02.exe
 spcontext01.exe
 sp19.exe
 dl07.exe
 psxstrsignal01.exe
 spsem_err02.exe
 spmsgq_err01.exe
 block04.exe
 cdtest.exe
 spglobalcon02.exe
 psxid01.exe
 dumpbuf01.exe
 psxtmclocknanosleep01.exe
 psxfilelock01.exe
 psxtmmqrcvblock01.exe
 termios01.exe
 sp59.exe
 getentropy01.exe
 psxtmbarrier03.exe
 psxtmsem02.exe
 psx15.exe
 complex.exe
 psxstat.exe
 psxitimer.exe
 sptimecounter03.exe
 mimfs_fsscandir01.exe
 imfs_fssymlink.exe
 ttest01.exe
 sp03.exe
 dl01.exe
 spmsgq_err02.exe
 stringto01.exe
 sprmsched02.exe
 devnullfatal01.exe
 mdosfs_fsrdwr.exe
 sp24.exe
 mimfs_fssymlink.exe
 psxsignal08.exe
 pwdgrp01.exe
 psxstack01.exe
 psximfs01.exe
 psxtmmq01.exe
 exit02.exe
 spcache01.exe
 jffs2_fsrdwr.exe
 psxtmsem04.exe
 psxpasswd02.exe
 sprmsched01.exe
 sperror02.exe
 psxrwlock01.exe
 mimfs_fstime.exe
 sptls04.exe
 psxtmthread06.exe
 psxtmkey02.exe
 spconsole01.exe
 sp40.exe
 psxtmcleanup01.exe
 sptask_err02.exe
 psxalarm01.exe
 top.exe
 spcbssched01.exe
 psxconfstr.exe
 mimfs_fslink.exe
 psxtmthread05.exe
 sp20.exe
 psxtmbarrier01.exe
 spcpucounter01.exe
 mouse01.exe
 spsimplesched03.exe
 sp49.exe
 psxthreadname01.exe
 sp75.exe
 psxcancel.exe
 psx10.exe
 spfatal33.exe
 sperror01.exe
 psxtmmutexattr01.exe
 sp77.exe
 psxconcurrency01.exe
 psxtmthread04.exe
 pwdgrp02.exe
 tm25.exe
 psx11.exe
 spedfsched04.exe
 psxtmrwlock07.exe
 fsclose01.exe
 spfatal14.exe
 tm08.exe
 psxtmsem03.exe
 speventsystem01.exe
 psxstack02.exe
 ts-validation-timecounter-0.exe
 fileio.exe
 tmtimer01.exe
 sp27.exe
 psxtmmutex04.exe
 jffs2_fssymlink.exe
 psxtmcond05.exe
 psxcancel01.exe
 psxautoinit02.exe
 block03.exe
 rhtaskswitch.exe
 psxtmmutex05.exe
 termios04.exe
 ts-validation-tls-1.exe
 psx02.exe
 psxtmsleep01.exe
 psxclassic01.exe
 spatomic01.exe
 sp07.exe
 tm35.exe
 spfifo01.exe
 termios07.exe
 psxfile02.exe
 mimfs_fsrename.exe
 psxsignal03.exe
 rcxx01.exe
 spprintk.exe
 linpack.exe
 spchain.exe
 sp68.exe
 psxsem01.exe
 psxmutexattr01.exe
 dl04.exe
 sp60.exe
 sp45.exe
 mrfs_fsrdwr.exe
 sp72.exe
 spprivenv01.exe
 sp34.exe
 irqs01.exe
 block17.exe
 spedfsched02.exe
 spstdthreads01.exe
 sha.exe
 ts-validation-one-cpu-0.exe
 md501.exe
 psxkey02.exe
 fsnofs01.exe
 tm11.exe
 sp55.exe
 termios09.exe
 mrfs_fssymlink.exe
 tm15.exe
 sp15.exe
 ts-validation-one-cpu-1.exe
 spfatal15.exe
 tar02.exe
 sp29.exe
 psxsignal05.exe
 tztest.exe
 psxgetattrnp01.exe
 sptask_err03.exe
 psxtimer01.exe
 psxtmthread03.exe
 psxaio02.exe
 psxspin01.exe
 fsimfsconfig03.exe
 bspcmdline01.exe
 imfs_fspatheval.exe
 tm24.exe
 mathf.exe
 spfreechain01.exe
 jffs2_fspatheval.exe
 spstkalloc03.exe
 psxtime.exe
 fsdosfswrite01.exe
 fsdosfssync01.exe
 tmcontext01.exe
 psxcleanup.exe
 psxtmcond04.exe
 psxkey05.exe
 sp37.exe
 ts-terminate.exe
 capture01.exe
 tm17.exe
 spfifo05.exe
 psxinttypes01.exe
 malloc02.exe
 psxtmsem05.exe
 spclock_err01.exe
 psxtmmutex02.exe
 fsdosfsformat01.exe
 sp23.exe
 psx05.exe
 psxmsgq01.exe
 mrfs_fserror.exe
 ts-performance-no-clock-0.exe
 ts-validation-acfg-1.exe
 spport_err01.exe
 psxtmsem01.exe
 block02.exe
 tm01.exe
 psxchroot01.exe
 sp63.exe
 spprofiling01.exe
 psxtmrwlock05.exe
 uid01.exe
 psx03.exe
 tmfine01.exe
 mdosfs_fstime.exe
 malloctest.exe
 psxmmap01.exe
 cpuuse.exe
 sp62.exe
 psxdevctl01.exe
 spfatal28.exe
 ticker.exe
 block07.exe
 sp31.exe
 psxmsgq03.exe
 psxmsgq02.exe
 mimfs_fsrdwr.exe
 sp41.exe
 tm36.exe
 spfatal12.exe
 imfs_fstime.exe
 jffs2_fslink.exe
 termios03.exe
 malloc03.exe
 psxsignal02.exe
 sp65.exe
 psxobj01.exe
 psxfile01.exe
 psxeintr_join.exe
 spinternalerror01.exe
 termios08.exe
 mdosfs_fspatheval.exe
 fsimfsconfig01.exe
 spsem03.exe
 spfatal05.exe
 psxtmrwlock03.exe
 tm13.exe
 psxkey06.exe
 sppartition_err01.exe
 jffs2_fspermission.exe
 sp11.exe
 sp17.exe
 dl09.exe
 spedfsched01.exe
 spfatal01.exe
 sp70.exe
 psxfchx01.exe
 sptimecounter01.exe
 fsrofs01.exe
 record01.exe
 psxglobalcon01.exe
 psxtmkey01.exe
 psxtmonce01.exe
 ts-validation-non-smp.exe
 sprbtree01.exe
 spthreadq01.exe
 sppagesize.exe
 spfatal30.exe
 psx04.exe
 fsrfsbitmap01.exe
 psxtmmutex03.exe
 mrfs_fspermission.exe
 tm33.exe
 tmonetoone.exe
 psxtmmqrcvblock02.exe
 sp56.exe
 tm28.exe
 jffs2_fserror.exe
 psx07.exe
 tm07.exe
 fsjffs2gc01.exe
 sp33.exe
 sptask_err01.exe
 sp76.exe
 i2c01.exe
 nsecs.exe
 tm20.exe
 sptls03.exe
 psxtmmutex06.exe
 spconfig01.exe
 psxtmrwlock06.exe
 psx01.exe
 spstkalloc.exe
 sp12.exe
 spheapprot.exe
 spsyslock01.exe
 psxtmnanosleep02.exe
 psxtmclocknanosleep02.exe
 spsimplesched01.exe
 psxrdwrv.exe
 psxtmthread02.exe
 spsignal_err01.exe
 fsimfsgeneric01.exe
 spmkdir.exe
 spwkspace.exe
 mrfs_fslink.exe
 psxgetrusage01.exe
 sp2038.exe
 spsimplesched02.exe
 sp25.exe
 sp35.exe
 sptask_err04.exe
 rhilatency.exe
 psxkey07.exe
 sp43.exe
 dl06.exe
 sp18.exe
 spfatal09.exe
 jffs2_fsscandir01.exe
 tm22.exe
 imfs_fsrdwr.exe
 sp01.exe
 spi01.exe
 psxfatal02.exe
 ts-unit-no-clock-0.exe
 libfdt01.exe
 dl02.exe
 sp26.exe
 psxfenv01.exe
 stackchk.exe
 tm09.exe
 sptimecounter02.exe
 spfatal11.exe
 psx14.exe
 spfifo04.exe
 sp57.exe
 block12.exe
 tm30.exe
 stackchk02.exe
 psxndbm01.exe
 spcpuset01.exe
 tm14.exe
 mrfs_fsfpathconf.exe
 psxtmcond01.exe
 sp13.exe
 iostream.exe
 rtmonuse.exe
 spstkalloc02.exe
 psxfatal01.exe
 psxtmthreadattr01.exe
 sptls01.exe
 psxkey01.exe
 spratemon_err01.exe
 spntp01.exe
 putenvtest.exe
 psxshm02.exe
 psxtmclocknanosleep03.exe
 psxaio01.exe
 ts-fatal-too-large-tls-size.exe
 block09.exe
 psxbarrier01.exe
 spregion_err01.exe
 unlimited.exe
 psxtmcond09.exe
 mdosfs_fsscandir01.exe
 sp21.exe
 psxkey03.exe
 mimfs_fserror.exe
 psxpipe01.exe
 ts-validation-io-kernel.exe
 psxconfig01.exe
 spcbssched03.exe
 sp50.exe
 psxtmcond10.exe
 psxtmbarrierattr01.exe
 deviceio01.exe
 block11.exe
 psxmsgq04.exe
 sp69.exe
 spclock_todhook01.exe
 spfifo02.exe
 spthread01.exe
 sp42.exe
 sp02.exe
 dl10.exe
 spfatal29.exe
 spfatal31.exe
 psxshm01.exe
 sp30.exe
 monitor.exe
 sp14.exe
 tm10.exe
 spmountmgr01.exe
 rhsemshuffle.exe
 ts-validation-1.exe
 psxsignal06.exe
 fsfseeko01.exe
 block10.exe
 termios05.exe
 spsize.exe
 tm03.exe
 rhtaskpreempt.exe
 exit03.exe
 psxtmbarrier04.exe
 sp52.exe
 sp06.exe
 sptimecounter04.exe
 spthreadlife01.exe
 devfs01.exe
 spsem_err01.exe
 ts-validation-intr.exe
 psxcleanup01.exe
 defaultconfig01.exe
 psxsignal07.exe
 spobjgetnext.exe
 psxftw01.exe
 ts-validation-tls-0.exe
 termios10.exe
 imfs_fspermission.exe
 fsimfsconfig02.exe
 psx06.exe
 tm05.exe
 devfs04.exe
 rhmlatency.exe
 psxtmmutex01.exe
 sptimerserver01.exe
 spedfsched03.exe
 psxcleanup02.exe
 psx08.exe
 psx09.exe
 sp46.exe
 sp54.exe
 tar03.exe
 base_sp.exe
 dl03.exe
 rhdeadlockbrk.exe
 spintr_err01.exe
 spmisc01.exe
 spfatal03.exe
 psxenosys.exe
 sp48.exe
 fsdosfsname01.exe
 spmutex01.exe
 psxsignal04.exe
 spevent_err03.exe
 spsysinit01.exe
 block08.exe
 spfatal32.exe
 mimfs_fspatheval.exe
 block14.exe
 stackchk01.exe
 spfifo03.exe
 dhrystone.exe
 mathl.exe
 spassoc01.exe
 math.exe
 psxtimer02.exe
 tm02.exe
 sptls02.exe
 psx16.exe
 spscheduler01.exe
 sppps01.exe
 spwatchdog.exe
 ttest02.exe
 tmck.exe
 spcxx01.exe
 tm21.exe
 shell01.exe
 sp66.exe
 psxkey08.exe
 tm16.exe
 splinkersets01.exe
 sppercpudata01.exe
 psxcond02.exe
 tm34.exe
 sp73.exe
 psxtmcond03.exe
 sp27a.exe
 tm12.exe
 sp04.exe
 spfatal34.exe
 tm18.exe
 sp53.exe
 flashdisk01.exe
 psx12.exe
 psxtmbarrier02.exe
 spsem02.exe
 psxkey04.exe
 sp67.exe
 sp51.exe
 sperror03.exe
 imfs_fsscandir01.exe
 spmrsp01.exe
 psxreaddir.exe
 mrfs_fspatheval.exe
 malloc04.exe
 tm23.exe
 block06.exe
 ts-validation-no-clock-0.exe
 sp22.exe
 exit01.exe
 record02.exe
 utf8proc01.exe
 sp44.exe
 dl08.exe
 sp16.exe
 crypt01.exe
 spqreslib.exe
 psxtmsleep02.exe
 tm32.exe
 spnsext01.exe
 capture.exe
 spsem01.exe
 imfs_fserror.exe
 tm26.exe
 psxonce01.exe
 psxsysconf.exe
 sp58.exe
 sp05.exe
 newlib01.exe
 spglobalcon01.exe
 spinternalerror02.exe
 psxclock.exe
 spextensions01.exe
 sp64.exe
 psxaio03.exe
 psxpasswd01.exe
 psxsignal01.exe
 ofw01.exe
 psxmount.exe
 psxtmcond08.exe
 psxtimes01.exe
 psximfs02.exe
 hello.exe
 termios11.exe
 ts-validation-cache.exe
 mrfs_fsscandir01.exe
 psxtmrwlock02.exe
 spfatal04.exe
 ts-validation-0.exe
 tm29.exe
 psxtmcond07.exe
 psxtmrwlock04.exe
 psxtmnanosleep01.exe
 speventtransient01.exe
 dl05.exe
 block01.exe
 spstkalloc04.exe
 sp38.exe
 termios02.exe
 ts-fatal-init-task-construct-failed.exe
 monitor02.exe
 psxusleep.exe
 sptimer_err01.exe
 fsbdpart01.exe
 tm04.exe
Log
===

RTEMS Testing - Tester, 6.0.not_released
 Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=jmr3904 --log=run-jmr3904.log --use-gitconfig --mail .
 Host: Linux VM-CentOS7 3.10.0-1160.42.2.el7.x86_64 #1 SMP Tue Sep 7 14:49:57 UTC 2021 x86_64
 Python: 2.7.5 (default, Nov 16 2020, 22:23:17) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.42.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.42.2.el7.x86_64 #1 SMP Tue Sep 7 14:49:57 UTC 2021 x86_64 x86_64)
[  1/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: dhrystone.exe
Result: invalid   
Time: 0:00:00.267256 dhrystone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019450
=>  Loading section .init, size 0x48 lma ffffffff880194c0
=>  Loading section .fini, size 0x30 lma ffffffff88019508
=>  Loading section .ctors, size 0x8 lma ffffffff88019538
=>  Loading section .dtors, size 0x8 lma ffffffff88019540
=>  Loading section .rdata, size 0x2704 lma ffffffff88019550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bc58
=>  Loading section .data, size 0x5b8 lma ffffffff8801bc70
=>  Start address ffffffff88000004
=>  Transfer rate: 921824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  2/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: linpack.exe
Result: invalid   
Time: 0:00:00.280030 linpack.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1aa10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801aa10
=>  Loading section .init, size 0x48 lma ffffffff8801aa80
=>  Loading section .fini, size 0x30 lma ffffffff8801aac8
=>  Loading section .ctors, size 0x8 lma ffffffff8801aaf8
=>  Loading section .dtors, size 0x8 lma ffffffff8801ab00
=>  Loading section .rdata, size 0x247c lma ffffffff8801ab10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cf90
=>  Loading section .data, size 0x5b8 lma ffffffff8801cfa8
=>  Start address ffffffff88000004
=>  Transfer rate: 961184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  3/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: whetstone.exe
Result: invalid   
Time: 0:00:00.272858 whetstone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19cb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019cb0
=>  Loading section .init, size 0x48 lma ffffffff88019d20
=>  Loading section .fini, size 0x30 lma ffffffff88019d68
=>  Loading section .ctors, size 0x8 lma ffffffff88019d98
=>  Loading section .dtors, size 0x8 lma ffffffff88019da0
=>  Loading section .rdata, size 0x232c lma ffffffff88019db0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c0e0
=>  Loading section .data, size 0x5c8 lma ffffffff8801c0f8
=>  Start address ffffffff88000004
=>  Transfer rate: 931232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  4/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid   
Time: 0:00:00.275758 fsbdpart01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22a50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022a50
=>  Loading section .init, size 0x48 lma ffffffff88022ac0
=>  Loading section .fini, size 0x30 lma ffffffff88022b08
=>  Loading section .ctors, size 0x8 lma ffffffff88022b38
=>  Loading section .dtors, size 0x8 lma ffffffff88022b40
=>  Loading section .rdata, size 0x28c8 lma ffffffff88022b50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025418
=>  Loading section .data, size 0x610 lma ffffffff88025430
=>  Start address ffffffff88000004
=>  Transfer rate: 1233344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  5/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsclose01.exe
Result: invalid   
Time: 0:00:00.253144 fsclose01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1aa30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801aa30
=>  Loading section .init, size 0x48 lma ffffffff8801aaa0
=>  Loading section .fini, size 0x30 lma ffffffff8801aae8
=>  Loading section .ctors, size 0x8 lma ffffffff8801ab18
=>  Loading section .dtors, size 0x8 lma ffffffff8801ab20
=>  Loading section .rdata, size 0x23b0 lma ffffffff8801ab30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cee0
=>  Loading section .data, size 0x5c0 lma ffffffff8801cef8
=>  Start address ffffffff88000004
=>  Transfer rate: 959872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  6/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid   
Time: 0:00:00.268959 fsdosfsformat01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2ace0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802ace0
=>  Loading section .init, size 0x48 lma ffffffff8802ad50
=>  Loading section .fini, size 0x30 lma ffffffff8802ad98
=>  Loading section .ctors, size 0x8 lma ffffffff8802adc8
=>  Loading section .dtors, size 0x8 lma ffffffff8802add0
=>  Loading section .rdata, size 0x2b40 lma ffffffff8802ade0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802d920
=>  Loading section .data, size 0x5e8 lma ffffffff8802d938
=>  Start address ffffffff88000004
=>  Transfer rate: 1505472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  7/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid   
Time: 0:00:00.261226 fsdosfsname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x321f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880321f0
=>  Loading section .init, size 0x48 lma ffffffff88032260
=>  Loading section .fini, size 0x30 lma ffffffff880322a8
=>  Loading section .ctors, size 0x8 lma ffffffff880322d8
=>  Loading section .dtors, size 0x8 lma ffffffff880322e0
=>  Loading section .rdata, size 0x121740 lma ffffffff880322f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88153a30
=>  Loading section .data, size 0x2c4e8 lma ffffffff88153a48
=>  Start address ffffffff88000004
=>  Transfer rate: 12581184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  8/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid   
Time: 0:00:00.258352 fsdosfsname02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x259c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880259c0
=>  Loading section .init, size 0x48 lma ffffffff88025a30
=>  Loading section .fini, size 0x30 lma ffffffff88025a78
=>  Loading section .ctors, size 0x8 lma ffffffff88025aa8
=>  Loading section .dtors, size 0x8 lma ffffffff88025ab0
=>  Loading section .rdata, size 0x2918 lma ffffffff88025ac0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880283d8
=>  Loading section .data, size 0x600 lma ffffffff880283f0
=>  Start address ffffffff88000004
=>  Transfer rate: 1331008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  9/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid   
Time: 0:00:00.253922 fsdosfssync01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026950
=>  Loading section .init, size 0x48 lma ffffffff880269c0
=>  Loading section .fini, size 0x30 lma ffffffff88026a08
=>  Loading section .ctors, size 0x8 lma ffffffff88026a38
=>  Loading section .dtors, size 0x8 lma ffffffff88026a40
=>  Loading section .rdata, size 0x27d0 lma ffffffff88026a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88029220
=>  Loading section .data, size 0x610 lma ffffffff88029238
=>  Start address ffffffff88000004
=>  Transfer rate: 1360384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 10/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid   
Time: 0:00:00.262323 fsdosfswrite01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027c80
=>  Loading section .init, size 0x48 lma ffffffff88027cf0
=>  Loading section .fini, size 0x30 lma ffffffff88027d38
=>  Loading section .ctors, size 0x8 lma ffffffff88027d68
=>  Loading section .dtors, size 0x8 lma ffffffff88027d70
=>  Loading section .rdata, size 0x28c8 lma ffffffff88027d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a648
=>  Loading section .data, size 0x5e8 lma ffffffff8802a660
=>  Start address ffffffff88000004
=>  Transfer rate: 1401344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 11/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid   
Time: 0:00:00.255704 fsfseeko01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012680
=>  Loading section .init, size 0x48 lma ffffffff880126f0
=>  Loading section .fini, size 0x30 lma ffffffff88012738
=>  Loading section .ctors, size 0x8 lma ffffffff88012768
=>  Loading section .dtors, size 0x8 lma ffffffff88012770
=>  Loading section .rdata, size 0x1a69 lma ffffffff88012780
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141f0
=>  Loading section .data, size 0x424 lma ffffffff88014208
=>  Start address ffffffff88000004
=>  Transfer rate: 667880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 12/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid   
Time: 0:00:00.261619 fsimfsconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88010950
=>  Loading section .init, size 0x48 lma ffffffff880109b0
=>  Loading section .fini, size 0x30 lma ffffffff880109f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010a28
=>  Loading section .dtors, size 0x8 lma ffffffff88010a30
=>  Loading section .rdata, size 0x1b14 lma ffffffff88010a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012558
=>  Loading section .data, size 0x3c8 lma ffffffff88012570
=>  Start address ffffffff88000004
=>  Transfer rate: 608608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 13/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid   
Time: 0:00:00.257118 fsimfsconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc30
=>  Loading section .init, size 0x48 lma ffffffff8800fca0
=>  Loading section .fini, size 0x30 lma ffffffff8800fce8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd18
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd20
=>  Loading section .rdata, size 0x1a65 lma ffffffff8800fd30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011798
=>  Loading section .data, size 0x408 lma ffffffff880117b0
=>  Start address ffffffff88000004
=>  Transfer rate: 580968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 14/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid   
Time: 0:00:00.256928 fsimfsconfig03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88010a60
=>  Loading section .init, size 0x48 lma ffffffff88010ac0
=>  Loading section .fini, size 0x30 lma ffffffff88010b08
=>  Loading section .ctors, size 0x8 lma ffffffff88010b38
=>  Loading section .dtors, size 0x8 lma ffffffff88010b40
=>  Loading section .rdata, size 0x1a85 lma ffffffff88010b50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125d8
=>  Loading section .data, size 0x3c8 lma ffffffff880125f0
=>  Start address ffffffff88000004
=>  Transfer rate: 609640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 15/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid   
Time: 0:00:00.262368 fsimfsgeneric01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e20
=>  Loading section .init, size 0x48 lma ffffffff88012e90
=>  Loading section .fini, size 0x30 lma ffffffff88012ed8
=>  Loading section .ctors, size 0x8 lma ffffffff88012f08
=>  Loading section .dtors, size 0x8 lma ffffffff88012f10
=>  Loading section .rdata, size 0x1d90 lma ffffffff88012f20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014cb0
=>  Loading section .data, size 0x448 lma ffffffff88014cc8
=>  Start address ffffffff88000004
=>  Transfer rate: 690240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 16/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid   
Time: 0:00:00.257638 fsjffs2gc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ecd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ecd0
=>  Loading section .init, size 0x48 lma ffffffff8801ed40
=>  Loading section .fini, size 0x30 lma ffffffff8801ed88
=>  Loading section .ctors, size 0x8 lma ffffffff8801edb8
=>  Loading section .dtors, size 0x8 lma ffffffff8801edc0
=>  Loading section .rdata, size 0x5245 lma ffffffff8801edd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024018
=>  Loading section .data, size 0x214b8 lma ffffffff88024030
=>  Start address ffffffff88000004
=>  Transfer rate: 2270952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 17/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: fsnofs01.exe
Result: invalid   
Time: 0:00:00.256875 fsnofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe5b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800e5b0
=>  Loading section .init, size 0x48 lma ffffffff8800e620
=>  Loading section .fini, size 0x30 lma ffffffff8800e668
=>  Loading section .ctors, size 0x8 lma ffffffff8800e698
=>  Loading section .dtors, size 0x8 lma ffffffff8800e6a0
=>  Loading section .rdata, size 0x1f19 lma ffffffff8800e6b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880105d0
=>  Loading section .data, size 0x3f8 lma ffffffff880105e8
=>  Start address ffffffff88000004
=>  Transfer rate: 544392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 18/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid   
Time: 0:00:00.265682 fsrfsbitmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022390
=>  Loading section .init, size 0x48 lma ffffffff88022400
=>  Loading section .fini, size 0x30 lma ffffffff88022448
=>  Loading section .ctors, size 0x8 lma ffffffff88022478
=>  Loading section .dtors, size 0x8 lma ffffffff88022480
=>  Loading section .rdata, size 0x5730 lma ffffffff88022490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027bc0
=>  Loading section .data, size 0x490 lma ffffffff88027bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 1311488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 19/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: fsrofs01.exe
Result: invalid   
Time: 0:00:00.264962 fsrofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x211a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880211a0
=>  Loading section .init, size 0x48 lma ffffffff88021210
=>  Loading section .fini, size 0x30 lma ffffffff88021258
=>  Loading section .ctors, size 0x8 lma ffffffff88021288
=>  Loading section .dtors, size 0x8 lma ffffffff88021290
=>  Loading section .rdata, size 0x4c34 lma ffffffff880212a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025ed8
=>  Loading section .data, size 0x468 lma ffffffff88025ef0
=>  Start address ffffffff88000004
=>  Transfer rate: 1251936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 20/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid   
Time: 0:00:00.257861 imfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18820 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018820
=>  Loading section .init, size 0x48 lma ffffffff88018890
=>  Loading section .fini, size 0x30 lma ffffffff880188d8
=>  Loading section .ctors, size 0x8 lma ffffffff88018908
=>  Loading section .dtors, size 0x8 lma ffffffff88018910
=>  Loading section .rdata, size 0x2560 lma ffffffff88018920
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ae80
=>  Loading section .data, size 0x5bc lma ffffffff8801ae98
=>  Start address ffffffff88000004
=>  Transfer rate: 893536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 21/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid   
Time: 0:00:00.257456 imfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010fc0
=>  Loading section .init, size 0x48 lma ffffffff88011030
=>  Loading section .fini, size 0x30 lma ffffffff88011078
=>  Loading section .ctors, size 0x8 lma ffffffff880110a8
=>  Loading section .dtors, size 0x8 lma ffffffff880110b0
=>  Loading section .rdata, size 0x1b9d lma ffffffff880110c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c60
=>  Loading section .data, size 0x450 lma ffffffff88012c78
=>  Start address ffffffff88000004
=>  Transfer rate: 624104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 22/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.256265 imfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ce0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ce0
=>  Loading section .init, size 0x48 lma ffffffff88011d50
=>  Loading section .fini, size 0x30 lma ffffffff88011d98
=>  Loading section .ctors, size 0x8 lma ffffffff88011dc8
=>  Loading section .dtors, size 0x8 lma ffffffff88011dd0
=>  Loading section .rdata, size 0x1d21 lma ffffffff88011de0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b08
=>  Loading section .data, size 0x450 lma ffffffff88013b20
=>  Start address ffffffff88000004
=>  Transfer rate: 654088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 23/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid   
Time: 0:00:00.254946 imfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18a90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018a90
=>  Loading section .init, size 0x48 lma ffffffff88018b00
=>  Loading section .fini, size 0x30 lma ffffffff88018b48
=>  Loading section .ctors, size 0x8 lma ffffffff88018b78
=>  Loading section .dtors, size 0x8 lma ffffffff88018b80
=>  Loading section .rdata, size 0x23f8 lma ffffffff88018b90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801af88
=>  Loading section .data, size 0x5bc lma ffffffff8801afa0
=>  Start address ffffffff88000004
=>  Transfer rate: 895648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 24/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.252518 imfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x139a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880139a0
=>  Loading section .init, size 0x48 lma ffffffff88013a10
=>  Loading section .fini, size 0x30 lma ffffffff88013a58
=>  Loading section .ctors, size 0x8 lma ffffffff88013a88
=>  Loading section .dtors, size 0x8 lma ffffffff88013a90
=>  Loading section .rdata, size 0x2021 lma ffffffff88013aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015ac8
=>  Loading section .data, size 0x450 lma ffffffff88015ae0
=>  Start address ffffffff88000004
=>  Transfer rate: 719112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 25/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.273528 imfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b30
=>  Loading section .init, size 0x48 lma ffffffff88011ba0
=>  Loading section .fini, size 0x30 lma ffffffff88011be8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c18
=>  Loading section .dtors, size 0x8 lma ffffffff88011c20
=>  Loading section .rdata, size 0x1bb1 lma ffffffff88011c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137e8
=>  Loading section .data, size 0x450 lma ffffffff88013800
=>  Start address ffffffff88000004
=>  Transfer rate: 647688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 26/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.257298 imfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011550
=>  Loading section .init, size 0x48 lma ffffffff880115c0
=>  Loading section .fini, size 0x30 lma ffffffff88011608
=>  Loading section .ctors, size 0x8 lma ffffffff88011638
=>  Loading section .dtors, size 0x8 lma ffffffff88011640
=>  Loading section .rdata, size 0x1cf9 lma ffffffff88011650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013350
=>  Loading section .data, size 0x450 lma ffffffff88013368
=>  Start address ffffffff88000004
=>  Transfer rate: 638280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 27/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid   
Time: 0:00:00.259644 imfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x125f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880125f0
=>  Loading section .init, size 0x48 lma ffffffff88012660
=>  Loading section .fini, size 0x30 lma ffffffff880126a8
=>  Loading section .ctors, size 0x8 lma ffffffff880126d8
=>  Loading section .dtors, size 0x8 lma ffffffff880126e0
=>  Loading section .rdata, size 0x1cd4 lma ffffffff880126f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880143c8
=>  Loading section .data, size 0x45c lma ffffffff880143e0
=>  Start address ffffffff88000004
=>  Transfer rate: 672128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 28/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid   
Time: 0:00:00.260003 jffs2_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26460 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026460
=>  Loading section .init, size 0x48 lma ffffffff880264d0
=>  Loading section .fini, size 0x30 lma ffffffff88026518
=>  Loading section .ctors, size 0x8 lma ffffffff88026548
=>  Loading section .dtors, size 0x8 lma ffffffff88026550
=>  Loading section .rdata, size 0x5928 lma ffffffff88026560
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802be88
=>  Loading section .data, size 0x2161c lma ffffffff8802bea0
=>  Start address ffffffff88000004
=>  Transfer rate: 2532768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 29/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid   
Time: 0:00:00.260937 jffs2_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ec90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ec90
=>  Loading section .init, size 0x48 lma ffffffff8801ed00
=>  Loading section .fini, size 0x30 lma ffffffff8801ed48
=>  Loading section .ctors, size 0x8 lma ffffffff8801ed78
=>  Loading section .dtors, size 0x8 lma ffffffff8801ed80
=>  Loading section .rdata, size 0x4fa5 lma ffffffff8801ed90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023d38
=>  Loading section .data, size 0x214b0 lma ffffffff88023d50
=>  Start address ffffffff88000004
=>  Transfer rate: 2265000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 30/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid   
Time: 0:00:00.256226 jffs2_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f9a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f9a0
=>  Loading section .init, size 0x48 lma ffffffff8801fa10
=>  Loading section .fini, size 0x30 lma ffffffff8801fa58
=>  Loading section .ctors, size 0x8 lma ffffffff8801fa88
=>  Loading section .dtors, size 0x8 lma ffffffff8801fa90
=>  Loading section .rdata, size 0x5129 lma ffffffff8801faa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024bd0
=>  Loading section .data, size 0x214b0 lma ffffffff88024be8
=>  Start address ffffffff88000004
=>  Transfer rate: 2294856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 31/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid   
Time: 0:00:00.262864 jffs2_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x266e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880266e0
=>  Loading section .init, size 0x48 lma ffffffff88026750
=>  Loading section .fini, size 0x30 lma ffffffff88026798
=>  Loading section .ctors, size 0x8 lma ffffffff880267c8
=>  Loading section .dtors, size 0x8 lma ffffffff880267d0
=>  Loading section .rdata, size 0x57c0 lma ffffffff880267e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802bfa0
=>  Loading section .data, size 0x2161c lma ffffffff8802bfb8
=>  Start address ffffffff88000004
=>  Transfer rate: 2535008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 32/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid   
Time: 0:00:00.262024 jffs2_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021580
=>  Loading section .init, size 0x48 lma ffffffff880215f0
=>  Loading section .fini, size 0x30 lma ffffffff88021638
=>  Loading section .ctors, size 0x8 lma ffffffff88021668
=>  Loading section .dtors, size 0x8 lma ffffffff88021670
=>  Loading section .rdata, size 0x5431 lma ffffffff88021680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026ab8
=>  Loading section .data, size 0x214b8 lma ffffffff88026ad0
=>  Start address ffffffff88000004
=>  Transfer rate: 2358216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 33/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid   
Time: 0:00:00.256164 jffs2_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f7d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f7d0
=>  Loading section .init, size 0x48 lma ffffffff8801f840
=>  Loading section .fini, size 0x30 lma ffffffff8801f888
=>  Loading section .ctors, size 0x8 lma ffffffff8801f8b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801f8c0
=>  Loading section .rdata, size 0x4fb9 lma ffffffff8801f8d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024890
=>  Loading section .data, size 0x214b0 lma ffffffff880248a8
=>  Start address ffffffff88000004
=>  Transfer rate: 2288200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 34/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid   
Time: 0:00:00.260162 jffs2_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f120 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f120
=>  Loading section .init, size 0x48 lma ffffffff8801f190
=>  Loading section .fini, size 0x30 lma ffffffff8801f1d8
=>  Loading section .ctors, size 0x8 lma ffffffff8801f208
=>  Loading section .dtors, size 0x8 lma ffffffff8801f210
=>  Loading section .rdata, size 0x5101 lma ffffffff8801f220
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024328
=>  Loading section .data, size 0x214b0 lma ffffffff88024340
=>  Start address ffffffff88000004
=>  Transfer rate: 2277128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 35/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid   
Time: 0:00:00.253459 jffs2_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x202a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880202a0
=>  Loading section .init, size 0x48 lma ffffffff88020310
=>  Loading section .fini, size 0x30 lma ffffffff88020358
=>  Loading section .ctors, size 0x8 lma ffffffff88020388
=>  Loading section .dtors, size 0x8 lma ffffffff88020390
=>  Loading section .rdata, size 0x50dc lma ffffffff880203a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025480
=>  Loading section .data, size 0x214bc lma ffffffff88025498
=>  Start address ffffffff88000004
=>  Transfer rate: 2312768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 36/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid   
Time: 0:00:00.262120 mdosfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2bb10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802bb10
=>  Loading section .init, size 0x48 lma ffffffff8802bb80
=>  Loading section .fini, size 0x30 lma ffffffff8802bbc8
=>  Loading section .ctors, size 0x8 lma ffffffff8802bbf8
=>  Loading section .dtors, size 0x8 lma ffffffff8802bc00
=>  Loading section .rdata, size 0x2fd0 lma ffffffff8802bc10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802ebe0
=>  Loading section .data, size 0x650 lma ffffffff8802ebf8
=>  Start address ffffffff88000004
=>  Transfer rate: 1544704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 37/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.260039 mdosfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27e40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027e40
=>  Loading section .init, size 0x48 lma ffffffff88027eb0
=>  Loading section .fini, size 0x30 lma ffffffff88027ef8
=>  Loading section .ctors, size 0x8 lma ffffffff88027f28
=>  Loading section .dtors, size 0x8 lma ffffffff88027f30
=>  Loading section .rdata, size 0x2ba0 lma ffffffff88027f40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802aae0
=>  Loading section .data, size 0x650 lma ffffffff8802aaf8
=>  Start address ffffffff88000004
=>  Transfer rate: 1411584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 38/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.263113 mdosfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x29c00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88029c00
=>  Loading section .init, size 0x48 lma ffffffff88029c70
=>  Loading section .fini, size 0x30 lma ffffffff88029cb8
=>  Loading section .ctors, size 0x8 lma ffffffff88029ce8
=>  Loading section .dtors, size 0x8 lma ffffffff88029cf0
=>  Loading section .rdata, size 0x2e98 lma ffffffff88029d00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802cb98
=>  Loading section .data, size 0x650 lma ffffffff8802cbb0
=>  Start address ffffffff88000004
=>  Transfer rate: 1478592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 39/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.258343 mdosfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028140
=>  Loading section .init, size 0x48 lma ffffffff880281b0
=>  Loading section .fini, size 0x30 lma ffffffff880281f8
=>  Loading section .ctors, size 0x8 lma ffffffff88028228
=>  Loading section .dtors, size 0x8 lma ffffffff88028230
=>  Loading section .rdata, size 0x2a28 lma ffffffff88028240
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802ac68
=>  Loading section .data, size 0x650 lma ffffffff8802ac80
=>  Start address ffffffff88000004
=>  Transfer rate: 1414720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 40/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid   
Time: 0:00:00.251334 mdosfs_fsstatvfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27240 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027240
=>  Loading section .init, size 0x48 lma ffffffff880272b0
=>  Loading section .fini, size 0x30 lma ffffffff880272f8
=>  Loading section .ctors, size 0x8 lma ffffffff88027328
=>  Loading section .dtors, size 0x8 lma ffffffff88027330
=>  Loading section .rdata, size 0x2b80 lma ffffffff88027340
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88029ec0
=>  Loading section .data, size 0x650 lma ffffffff88029ed8
=>  Start address ffffffff88000004
=>  Transfer rate: 1386752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 41/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid   
Time: 0:00:00.258504 mdosfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028930
=>  Loading section .init, size 0x48 lma ffffffff880289a0
=>  Loading section .fini, size 0x30 lma ffffffff880289e8
=>  Loading section .ctors, size 0x8 lma ffffffff88028a18
=>  Loading section .dtors, size 0x8 lma ffffffff88028a20
=>  Loading section .rdata, size 0x2b34 lma ffffffff88028a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b568
=>  Loading section .data, size 0x65c lma ffffffff8802b580
=>  Start address ffffffff88000004
=>  Transfer rate: 1433216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 42/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid   
Time: 0:00:00.252508 mimfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019470
=>  Loading section .init, size 0x48 lma ffffffff880194e0
=>  Loading section .fini, size 0x30 lma ffffffff88019528
=>  Loading section .ctors, size 0x8 lma ffffffff88019558
=>  Loading section .dtors, size 0x8 lma ffffffff88019560
=>  Loading section .rdata, size 0x2680 lma ffffffff88019570
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bbf0
=>  Loading section .data, size 0x5ec lma ffffffff8801bc08
=>  Start address ffffffff88000004
=>  Transfer rate: 921440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 43/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid   
Time: 0:00:00.276851 mimfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c10
=>  Loading section .init, size 0x48 lma ffffffff88011c80
=>  Loading section .fini, size 0x30 lma ffffffff88011cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88011cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88011d00
=>  Loading section .rdata, size 0x1cc1 lma ffffffff88011d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139d8
=>  Loading section .data, size 0x480 lma ffffffff880139f0
=>  Start address ffffffff88000004
=>  Transfer rate: 652040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 44/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.276568 mimfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012930
=>  Loading section .init, size 0x48 lma ffffffff880129a0
=>  Loading section .fini, size 0x30 lma ffffffff880129e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012a18
=>  Loading section .dtors, size 0x8 lma ffffffff88012a20
=>  Loading section .rdata, size 0x1e45 lma ffffffff88012a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014878
=>  Loading section .data, size 0x480 lma ffffffff88014890
=>  Start address ffffffff88000004
=>  Transfer rate: 682024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 45/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid   
Time: 0:00:00.260216 mimfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x196f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880196f0
=>  Loading section .init, size 0x48 lma ffffffff88019760
=>  Loading section .fini, size 0x30 lma ffffffff880197a8
=>  Loading section .ctors, size 0x8 lma ffffffff880197d8
=>  Loading section .dtors, size 0x8 lma ffffffff880197e0
=>  Loading section .rdata, size 0x2520 lma ffffffff880197f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bd10
=>  Loading section .data, size 0x5ec lma ffffffff8801bd28
=>  Start address ffffffff88000004
=>  Transfer rate: 923744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 46/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.274180 mimfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x145f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880145f0
=>  Loading section .init, size 0x48 lma ffffffff88014660
=>  Loading section .fini, size 0x30 lma ffffffff880146a8
=>  Loading section .ctors, size 0x8 lma ffffffff880146d8
=>  Loading section .dtors, size 0x8 lma ffffffff880146e0
=>  Loading section .rdata, size 0x2145 lma ffffffff880146f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016838
=>  Loading section .data, size 0x480 lma ffffffff88016850
=>  Start address ffffffff88000004
=>  Transfer rate: 747048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 47/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid   
Time: 0:00:00.259698 mimfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801c430
=>  Loading section .init, size 0x48 lma ffffffff8801c4a0
=>  Loading section .fini, size 0x30 lma ffffffff8801c4e8
=>  Loading section .ctors, size 0x8 lma ffffffff8801c518
=>  Loading section .dtors, size 0x8 lma ffffffff8801c520
=>  Loading section .rdata, size 0x2ba8 lma ffffffff8801c530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f0d8
=>  Loading section .data, size 0x5ec lma ffffffff8801f0f0
=>  Start address ffffffff88000004
=>  Transfer rate: 1029792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 48/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:40  W:0   | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.252245 mimfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12780 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012780
=>  Loading section .init, size 0x48 lma ffffffff880127f0
=>  Loading section .fini, size 0x30 lma ffffffff88012838
=>  Loading section .ctors, size 0x8 lma ffffffff88012868
=>  Loading section .dtors, size 0x8 lma ffffffff88012870
=>  Loading section .rdata, size 0x1cd5 lma ffffffff88012880
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014558
=>  Loading section .data, size 0x480 lma ffffffff88014570
=>  Start address ffffffff88000004
=>  Transfer rate: 675624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 49/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.257298 mimfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880121b0
=>  Loading section .init, size 0x48 lma ffffffff88012220
=>  Loading section .fini, size 0x30 lma ffffffff88012268
=>  Loading section .ctors, size 0x8 lma ffffffff88012298
=>  Loading section .dtors, size 0x8 lma ffffffff880122a0
=>  Loading section .rdata, size 0x1e1d lma ffffffff880122b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140d0
=>  Loading section .data, size 0x480 lma ffffffff880140e8
=>  Start address ffffffff88000004
=>  Transfer rate: 666344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 50/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid   
Time: 0:00:00.261906 mimfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013250
=>  Loading section .init, size 0x48 lma ffffffff880132c0
=>  Loading section .fini, size 0x30 lma ffffffff88013308
=>  Loading section .ctors, size 0x8 lma ffffffff88013338
=>  Loading section .dtors, size 0x8 lma ffffffff88013340
=>  Loading section .rdata, size 0x1df8 lma ffffffff88013350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015148
=>  Loading section .data, size 0x48c lma ffffffff88015160
=>  Start address ffffffff88000004
=>  Transfer rate: 700192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 51/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid   
Time: 0:00:00.260461 mrfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028730
=>  Loading section .init, size 0x48 lma ffffffff880287a0
=>  Loading section .fini, size 0x30 lma ffffffff880287e8
=>  Loading section .ctors, size 0x8 lma ffffffff88028818
=>  Loading section .dtors, size 0x8 lma ffffffff88028820
=>  Loading section .rdata, size 0x5728 lma ffffffff88028830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802df58
=>  Loading section .data, size 0x5fc lma ffffffff8802df70
=>  Start address ffffffff88000004
=>  Transfer rate: 1518368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 52/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid   
Time: 0:00:00.270704 mrfs_fsfpathconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20b10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020b10
=>  Loading section .init, size 0x48 lma ffffffff88020b80
=>  Loading section .fini, size 0x30 lma ffffffff88020bc8
=>  Loading section .ctors, size 0x8 lma ffffffff88020bf8
=>  Loading section .dtors, size 0x8 lma ffffffff88020c00
=>  Loading section .rdata, size 0x4f58 lma ffffffff88020c10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025b68
=>  Loading section .data, size 0x490 lma ffffffff88025b80
=>  Start address ffffffff88000004
=>  Transfer rate: 1245248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 53/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid   
Time: 0:00:00.258864 mrfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21020 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021020
=>  Loading section .init, size 0x48 lma ffffffff88021090
=>  Loading section .fini, size 0x30 lma ffffffff880210d8
=>  Loading section .ctors, size 0x8 lma ffffffff88021108
=>  Loading section .dtors, size 0x8 lma ffffffff88021110
=>  Loading section .rdata, size 0x4d78 lma ffffffff88021120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025e98
=>  Loading section .data, size 0x490 lma ffffffff88025eb0
=>  Start address ffffffff88000004
=>  Transfer rate: 1251776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 54/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.264808 mrfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021a70
=>  Loading section .init, size 0x48 lma ffffffff88021ae0
=>  Loading section .fini, size 0x30 lma ffffffff88021b28
=>  Loading section .ctors, size 0x8 lma ffffffff88021b58
=>  Loading section .dtors, size 0x8 lma ffffffff88021b60
=>  Loading section .rdata, size 0x4f00 lma ffffffff88021b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026a70
=>  Loading section .data, size 0x490 lma ffffffff88026a88
=>  Start address ffffffff88000004
=>  Transfer rate: 1276032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 55/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid   
Time: 0:00:00.254316 mrfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x289a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880289a0
=>  Loading section .init, size 0x48 lma ffffffff88028a10
=>  Loading section .fini, size 0x30 lma ffffffff88028a58
=>  Loading section .ctors, size 0x8 lma ffffffff88028a88
=>  Loading section .dtors, size 0x8 lma ffffffff88028a90
=>  Loading section .rdata, size 0x55d0 lma ffffffff88028aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e070
=>  Loading section .data, size 0x5fc lma ffffffff8802e088
=>  Start address ffffffff88000004
=>  Transfer rate: 1520608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 56/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:48  W:0   | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.255178 mrfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023970
=>  Loading section .init, size 0x48 lma ffffffff880239e0
=>  Loading section .fini, size 0x30 lma ffffffff88023a28
=>  Loading section .ctors, size 0x8 lma ffffffff88023a58
=>  Loading section .dtors, size 0x8 lma ffffffff88023a60
=>  Loading section .rdata, size 0x51fc lma ffffffff88023a70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028c70
=>  Loading section .data, size 0x490 lma ffffffff88028c88
=>  Start address ffffffff88000004
=>  Transfer rate: 1345632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 57/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid   
Time: 0:00:00.265364 mrfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802b700
=>  Loading section .init, size 0x48 lma ffffffff8802b770
=>  Loading section .fini, size 0x30 lma ffffffff8802b7b8
=>  Loading section .ctors, size 0x8 lma ffffffff8802b7e8
=>  Loading section .dtors, size 0x8 lma ffffffff8802b7f0
=>  Loading section .rdata, size 0x5c60 lma ffffffff8802b800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88031460
=>  Loading section .data, size 0x5fc lma ffffffff88031478
=>  Start address ffffffff88000004
=>  Transfer rate: 1626976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 58/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.254979 mrfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21d70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021d70
=>  Loading section .init, size 0x48 lma ffffffff88021de0
=>  Loading section .fini, size 0x30 lma ffffffff88021e28
=>  Loading section .ctors, size 0x8 lma ffffffff88021e58
=>  Loading section .dtors, size 0x8 lma ffffffff88021e60
=>  Loading section .rdata, size 0x4d94 lma ffffffff88021e70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026c08
=>  Loading section .data, size 0x490 lma ffffffff88026c20
=>  Start address ffffffff88000004
=>  Transfer rate: 1279264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 59/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.260845 mrfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x214c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880214c0
=>  Loading section .init, size 0x48 lma ffffffff88021530
=>  Loading section .fini, size 0x30 lma ffffffff88021578
=>  Loading section .ctors, size 0x8 lma ffffffff880215a8
=>  Loading section .dtors, size 0x8 lma ffffffff880215b0
=>  Loading section .rdata, size 0x4ed8 lma ffffffff880215c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026498
=>  Loading section .data, size 0x490 lma ffffffff880264b0
=>  Start address ffffffff88000004
=>  Transfer rate: 1264064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 60/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid   
Time: 0:00:00.266643 mrfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022550
=>  Loading section .init, size 0x48 lma ffffffff880225c0
=>  Loading section .fini, size 0x30 lma ffffffff88022608
=>  Loading section .ctors, size 0x8 lma ffffffff88022638
=>  Loading section .dtors, size 0x8 lma ffffffff88022640
=>  Loading section .rdata, size 0x4e98 lma ffffffff88022650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880274e8
=>  Loading section .data, size 0x49c lma ffffffff88027500
=>  Start address ffffffff88000004
=>  Transfer rate: 1297568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 61/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: tftpfs.exe
Result: invalid   
Time: 0:00:00.264260 tftpfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x35210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x1f0 lma ffffffff88035210
=>  Loading section .init, size 0x48 lma ffffffff88035400
=>  Loading section .fini, size 0x30 lma ffffffff88035448
=>  Loading section .ctors, size 0x8 lma ffffffff88035478
=>  Loading section .dtors, size 0x8 lma ffffffff88035480
=>  Loading section .rdata, size 0x5fb8 lma ffffffff88035490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8803b448
=>  Loading section .data, size 0xbb8 lma ffffffff8803b460
=>  Start address ffffffff88000004
=>  Transfer rate: 1966208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 62/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: block01.exe
Result: invalid   
Time: 0:00:00.251708 block01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015c80
=>  Loading section .init, size 0x48 lma ffffffff88015cf0
=>  Loading section .fini, size 0x30 lma ffffffff88015d38
=>  Loading section .ctors, size 0x8 lma ffffffff88015d68
=>  Loading section .dtors, size 0x8 lma ffffffff88015d70
=>  Loading section .rdata, size 0x1cd1 lma ffffffff88015d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017a58
=>  Loading section .data, size 0x440 lma ffffffff88017a70
=>  Start address ffffffff88000004
=>  Transfer rate: 783624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 63/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: block02.exe
Result: invalid   
Time: 0:00:00.264787 block02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014770
=>  Loading section .init, size 0x48 lma ffffffff880147e0
=>  Loading section .fini, size 0x30 lma ffffffff88014828
=>  Loading section .ctors, size 0x8 lma ffffffff88014858
=>  Loading section .dtors, size 0x8 lma ffffffff88014860
=>  Loading section .rdata, size 0x1c89 lma ffffffff88014870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016500
=>  Loading section .data, size 0x430 lma ffffffff88016518
=>  Start address ffffffff88000004
=>  Transfer rate: 739784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 64/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:56  W:0   | mipstx39/jmr3904: block03.exe
Result: invalid   
Time: 0:00:00.255363 block03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014700
=>  Loading section .init, size 0x48 lma ffffffff88014770
=>  Loading section .fini, size 0x30 lma ffffffff880147b8
=>  Loading section .ctors, size 0x8 lma ffffffff880147e8
=>  Loading section .dtors, size 0x8 lma ffffffff880147f0
=>  Loading section .rdata, size 0x1c71 lma ffffffff88014800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016478
=>  Loading section .data, size 0x430 lma ffffffff88016490
=>  Start address ffffffff88000004
=>  Transfer rate: 738696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 65/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block04.exe
Result: invalid   
Time: 0:00:00.257381 block04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014690
=>  Loading section .init, size 0x48 lma ffffffff88014700
=>  Loading section .fini, size 0x30 lma ffffffff88014748
=>  Loading section .ctors, size 0x8 lma ffffffff88014778
=>  Loading section .dtors, size 0x8 lma ffffffff88014780
=>  Loading section .rdata, size 0x1c09 lma ffffffff88014790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880163a0
=>  Loading section .data, size 0x430 lma ffffffff880163b8
=>  Start address ffffffff88000004
=>  Transfer rate: 736968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 66/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block05.exe
Result: invalid   
Time: 0:00:00.258500 block05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015950
=>  Loading section .init, size 0x48 lma ffffffff880159c0
=>  Loading section .fini, size 0x30 lma ffffffff88015a08
=>  Loading section .ctors, size 0x8 lma ffffffff88015a38
=>  Loading section .dtors, size 0x8 lma ffffffff88015a40
=>  Loading section .rdata, size 0x1c51 lma ffffffff88015a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880176a8
=>  Loading section .data, size 0x440 lma ffffffff880176c0
=>  Start address ffffffff88000004
=>  Transfer rate: 776072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 67/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block06.exe
Result: invalid   
Time: 0:00:00.256247 block06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e690
=>  Loading section .init, size 0x48 lma ffffffff8801e700
=>  Loading section .fini, size 0x30 lma ffffffff8801e748
=>  Loading section .ctors, size 0x8 lma ffffffff8801e778
=>  Loading section .dtors, size 0x8 lma ffffffff8801e780
=>  Loading section .rdata, size 0x2dc8 lma ffffffff8801e790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021558
=>  Loading section .data, size 0x5dc lma ffffffff88021570
=>  Start address ffffffff88000004
=>  Transfer rate: 1104416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 68/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block07.exe
Result: invalid   
Time: 0:00:00.262914 block07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014a70
=>  Loading section .init, size 0x48 lma ffffffff88014ae0
=>  Loading section .fini, size 0x30 lma ffffffff88014b28
=>  Loading section .ctors, size 0x8 lma ffffffff88014b58
=>  Loading section .dtors, size 0x8 lma ffffffff88014b60
=>  Loading section .rdata, size 0x1ce5 lma ffffffff88014b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016858
=>  Loading section .data, size 0x430 lma ffffffff88016870
=>  Start address ffffffff88000004
=>  Transfer rate: 746664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 69/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block08.exe
Result: invalid   
Time: 0:00:00.254708 block08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c050 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c050
=>  Loading section .init, size 0x48 lma ffffffff8801c0d0
=>  Loading section .fini, size 0x30 lma ffffffff8801c118
=>  Loading section .ctors, size 0x8 lma ffffffff8801c148
=>  Loading section .dtors, size 0x8 lma ffffffff8801c150
=>  Loading section .rdata, size 0x2539 lma ffffffff8801c160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e6a0
=>  Loading section .data, size 0x4d8 lma ffffffff8801e6b8
=>  Start address ffffffff88000004
=>  Transfer rate: 1006600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 70/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block09.exe
Result: invalid   
Time: 0:00:00.254322 block09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x150d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880150d0
=>  Loading section .init, size 0x48 lma ffffffff88015140
=>  Loading section .fini, size 0x30 lma ffffffff88015188
=>  Loading section .ctors, size 0x8 lma ffffffff880151b8
=>  Loading section .dtors, size 0x8 lma ffffffff880151c0
=>  Loading section .rdata, size 0x1c11 lma ffffffff880151d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016de8
=>  Loading section .data, size 0x440 lma ffffffff88016e00
=>  Start address ffffffff88000004
=>  Transfer rate: 758152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 71/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block10.exe
Result: invalid   
Time: 0:00:00.260416 block10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015a30
=>  Loading section .init, size 0x48 lma ffffffff88015aa0
=>  Loading section .fini, size 0x30 lma ffffffff88015ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88015b18
=>  Loading section .dtors, size 0x8 lma ffffffff88015b20
=>  Loading section .rdata, size 0x1e39 lma ffffffff88015b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017970
=>  Loading section .data, size 0x440 lma ffffffff88017988
=>  Start address ffffffff88000004
=>  Transfer rate: 781768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 72/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:64  W:0   | mipstx39/jmr3904: block11.exe
Result: invalid   
Time: 0:00:00.259230 block11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016530
=>  Loading section .init, size 0x48 lma ffffffff880165a0
=>  Loading section .fini, size 0x30 lma ffffffff880165e8
=>  Loading section .ctors, size 0x8 lma ffffffff88016618
=>  Loading section .dtors, size 0x8 lma ffffffff88016620
=>  Loading section .rdata, size 0x1e19 lma ffffffff88016630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018450
=>  Loading section .data, size 0x458 lma ffffffff88018468
=>  Start address ffffffff88000004
=>  Transfer rate: 804232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 73/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: block12.exe
Result: invalid   
Time: 0:00:00.259524 block12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014b30
=>  Loading section .init, size 0x48 lma ffffffff88014ba0
=>  Loading section .fini, size 0x30 lma ffffffff88014be8
=>  Loading section .ctors, size 0x8 lma ffffffff88014c18
=>  Loading section .dtors, size 0x8 lma ffffffff88014c20
=>  Loading section .rdata, size 0x1c41 lma ffffffff88014c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016878
=>  Loading section .data, size 0x478 lma ffffffff88016890
=>  Start address ffffffff88000004
=>  Transfer rate: 747464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 74/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: block13.exe
Result: invalid   
Time: 0:00:00.258194 block13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c50
=>  Loading section .init, size 0x48 lma ffffffff88014cc0
=>  Loading section .fini, size 0x30 lma ffffffff88014d08
=>  Loading section .ctors, size 0x8 lma ffffffff88014d38
=>  Loading section .dtors, size 0x8 lma ffffffff88014d40
=>  Loading section .rdata, size 0x2185 lma ffffffff88014d50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ed8
=>  Loading section .data, size 0x440 lma ffffffff88016ef0
=>  Start address ffffffff88000004
=>  Transfer rate: 760104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 75/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: block14.exe
Result: invalid   
Time: 0:00:00.261058 block14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014f00
=>  Loading section .init, size 0x48 lma ffffffff88014f70
=>  Loading section .fini, size 0x30 lma ffffffff88014fb8
=>  Loading section .ctors, size 0x8 lma ffffffff88014fe8
=>  Loading section .dtors, size 0x8 lma ffffffff88014ff0
=>  Loading section .rdata, size 0x25d5 lma ffffffff88015000
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880175d8
=>  Loading section .data, size 0x440 lma ffffffff880175f0
=>  Start address ffffffff88000004
=>  Transfer rate: 774440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 76/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: block15.exe
Result: invalid   
Time: 0:00:00.269270 block15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ca0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014ca0
=>  Loading section .init, size 0x48 lma ffffffff88014d10
=>  Loading section .fini, size 0x30 lma ffffffff88014d58
=>  Loading section .ctors, size 0x8 lma ffffffff88014d88
=>  Loading section .dtors, size 0x8 lma ffffffff88014d90
=>  Loading section .rdata, size 0x1d0d lma ffffffff88014da0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ab0
=>  Loading section .data, size 0x440 lma ffffffff88016ac8
=>  Start address ffffffff88000004
=>  Transfer rate: 751592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 77/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: block16.exe
Result: invalid   
Time: 0:00:00.255843 block16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014f30
=>  Loading section .init, size 0x48 lma ffffffff88014fa0
=>  Loading section .fini, size 0x30 lma ffffffff88014fe8
=>  Loading section .ctors, size 0x8 lma ffffffff88015018
=>  Loading section .dtors, size 0x8 lma ffffffff88015020
=>  Loading section .rdata, size 0x1cbd lma ffffffff88015030
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016cf0
=>  Loading section .data, size 0x440 lma ffffffff88016d08
=>  Start address ffffffff88000004
=>  Transfer rate: 756200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 78/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: block17.exe
Result: invalid   
Time: 0:00:00.257729 block17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014390
=>  Loading section .init, size 0x48 lma ffffffff88014400
=>  Loading section .fini, size 0x30 lma ffffffff88014448
=>  Loading section .ctors, size 0x8 lma ffffffff88014478
=>  Loading section .dtors, size 0x8 lma ffffffff88014480
=>  Loading section .rdata, size 0x1b65 lma ffffffff88014490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015ff8
=>  Loading section .data, size 0x440 lma ffffffff88016010
=>  Start address ffffffff88000004
=>  Transfer rate: 729640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 79/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid   
Time: 0:00:00.254381 bspcmdline01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010450
=>  Loading section .init, size 0x48 lma ffffffff880104c0
=>  Loading section .fini, size 0x30 lma ffffffff88010508
=>  Loading section .ctors, size 0x8 lma ffffffff88010538
=>  Loading section .dtors, size 0x8 lma ffffffff88010540
=>  Loading section .rdata, size 0x1f55 lma ffffffff88010550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124a8
=>  Loading section .data, size 0x408 lma ffffffff880124c0
=>  Start address ffffffff88000004
=>  Transfer rate: 607720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 80/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:72  W:0   | mipstx39/jmr3904: capture01.exe
Result: invalid   
Time: 0:00:00.273687 capture01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e0f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801e0f0
=>  Loading section .init, size 0x48 lma ffffffff8801e170
=>  Loading section .fini, size 0x30 lma ffffffff8801e1b8
=>  Loading section .ctors, size 0x8 lma ffffffff8801e1e8
=>  Loading section .dtors, size 0x8 lma ffffffff8801e1f0
=>  Loading section .rdata, size 0x2810 lma ffffffff8801e200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020a10
=>  Loading section .data, size 0x618 lma ffffffff88020a28
=>  Start address ffffffff88000004
=>  Transfer rate: 1081792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 81/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: complex.exe
Result: invalid   
Time: 0:00:00.263479 complex.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88025150
=>  Loading section .init, size 0x48 lma ffffffff880251c0
=>  Loading section .fini, size 0x30 lma ffffffff88025208
=>  Loading section .ctors, size 0x8 lma ffffffff88025238
=>  Loading section .dtors, size 0x8 lma ffffffff88025240
=>  Loading section .rdata, size 0x2f68 lma ffffffff88025250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880281b8
=>  Loading section .data, size 0x5c0 lma ffffffff880281d0
=>  Start address ffffffff88000004
=>  Transfer rate: 1326144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 82/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: cpuuse.exe
Result: invalid   
Time: 0:00:00.255559 cpuuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012a90
=>  Loading section .init, size 0x48 lma ffffffff88012b00
=>  Loading section .fini, size 0x30 lma ffffffff88012b48
=>  Loading section .ctors, size 0x8 lma ffffffff88012b78
=>  Loading section .dtors, size 0x8 lma ffffffff88012b80
=>  Loading section .rdata, size 0x2510 lma ffffffff88012b90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150a0
=>  Loading section .data, size 0x610 lma ffffffff880150b8
=>  Start address ffffffff88000004
=>  Transfer rate: 701952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 83/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: crypt01.exe
Result: invalid   
Time: 0:00:00.255270 crypt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88024c80
=>  Loading section .init, size 0x48 lma ffffffff88024cf0
=>  Loading section .fini, size 0x30 lma ffffffff88024d38
=>  Loading section .ctors, size 0x8 lma ffffffff88024d68
=>  Loading section .dtors, size 0x8 lma ffffffff88024d70
=>  Loading section .rdata, size 0x2c38 lma ffffffff88024d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880279b8
=>  Loading section .data, size 0x5e4 lma ffffffff880279d0
=>  Start address ffffffff88000004
=>  Transfer rate: 1310048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 84/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid   
Time: 0:00:00.261494 defaultconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14570 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014570
=>  Loading section .init, size 0x48 lma ffffffff880145f0
=>  Loading section .fini, size 0x30 lma ffffffff88014638
=>  Loading section .ctors, size 0x8 lma ffffffff88014668
=>  Loading section .dtors, size 0x8 lma ffffffff88014670
=>  Loading section .rdata, size 0x1ca8 lma ffffffff88014680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016328
=>  Loading section .data, size 0x5b0 lma ffffffff88016340
=>  Start address ffffffff88000004
=>  Transfer rate: 739136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 85/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: devfs01.exe
Result: invalid   
Time: 0:00:00.254067 devfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc7d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800c7d0
=>  Loading section .init, size 0x48 lma ffffffff8800c840
=>  Loading section .fini, size 0x30 lma ffffffff8800c888
=>  Loading section .ctors, size 0x8 lma ffffffff8800c8b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800c8c0
=>  Loading section .rdata, size 0x1885 lma ffffffff8800c8d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e158
=>  Loading section .data, size 0x408 lma ffffffff8800e170
=>  Start address ffffffff88000004
=>  Transfer rate: 469864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 86/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: devfs04.exe
Result: invalid   
Time: 0:00:00.259597 devfs04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800d530
=>  Loading section .init, size 0x48 lma ffffffff8800d5a0
=>  Loading section .fini, size 0x30 lma ffffffff8800d5e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800d618
=>  Loading section .dtors, size 0x8 lma ffffffff8800d620
=>  Loading section .rdata, size 0x1a59 lma ffffffff8800d630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800f090
=>  Loading section .data, size 0x3ec lma ffffffff8800f0a8
=>  Start address ffffffff88000004
=>  Transfer rate: 500776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 87/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: deviceio01.exe
Result: invalid   
Time: 0:00:00.254532 deviceio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106e0
=>  Loading section .init, size 0x48 lma ffffffff88010750
=>  Loading section .fini, size 0x30 lma ffffffff88010798
=>  Loading section .ctors, size 0x8 lma ffffffff880107c8
=>  Loading section .dtors, size 0x8 lma ffffffff880107d0
=>  Loading section .rdata, size 0x1b21 lma ffffffff880107e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012308
=>  Loading section .data, size 0x430 lma ffffffff88012320
=>  Start address ffffffff88000004
=>  Transfer rate: 604680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 88/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:80  W:0   | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid   
Time: 0:00:00.255962 devnullfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102d0
=>  Loading section .init, size 0x48 lma ffffffff88010340
=>  Loading section .fini, size 0x30 lma ffffffff88010388
=>  Loading section .ctors, size 0x8 lma ffffffff880103b8
=>  Loading section .dtors, size 0x8 lma ffffffff880103c0
=>  Loading section .rdata, size 0x1efd lma ffffffff880103d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122d0
=>  Loading section .data, size 0x418 lma ffffffff880122e8
=>  Start address ffffffff88000004
=>  Transfer rate: 604072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 89/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl01.exe
Result: invalid   
Time: 0:00:00.263356 dl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27a00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027a00
=>  Loading section .init, size 0x48 lma ffffffff88027a70
=>  Loading section .fini, size 0x30 lma ffffffff88027ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88027ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88027af0
=>  Loading section .rdata, size 0xc058 lma ffffffff88027b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033b58
=>  Loading section .data, size 0x5c0 lma ffffffff88033b70
=>  Start address ffffffff88000004
=>  Transfer rate: 1706304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 90/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl02.exe
Result: invalid   
Time: 0:00:00.256273 dl02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027a70
=>  Loading section .init, size 0x48 lma ffffffff88027ae0
=>  Loading section .fini, size 0x30 lma ffffffff88027b28
=>  Loading section .ctors, size 0x8 lma ffffffff88027b58
=>  Loading section .dtors, size 0x8 lma ffffffff88027b60
=>  Loading section .rdata, size 0xe830 lma ffffffff88027b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880363a0
=>  Loading section .data, size 0x5b8 lma ffffffff880363b8
=>  Start address ffffffff88000004
=>  Transfer rate: 1788736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 91/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl03.exe
Result: invalid   
Time: 0:00:00.257257 dl03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b5a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801b5a0
=>  Loading section .init, size 0x48 lma ffffffff8801b610
=>  Loading section .fini, size 0x30 lma ffffffff8801b658
=>  Loading section .ctors, size 0x8 lma ffffffff8801b688
=>  Loading section .dtors, size 0x8 lma ffffffff8801b690
=>  Loading section .rdata, size 0x2d48 lma ffffffff8801b6a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e3e8
=>  Loading section .data, size 0x62c lma ffffffff8801e400
=>  Start address ffffffff88000004
=>  Transfer rate: 1003808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 92/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl04.exe
Result: invalid   
Time: 0:00:00.262542 dl04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027520
=>  Loading section .init, size 0x48 lma ffffffff88027590
=>  Loading section .fini, size 0x30 lma ffffffff880275d8
=>  Loading section .ctors, size 0x8 lma ffffffff88027608
=>  Loading section .dtors, size 0x8 lma ffffffff88027610
=>  Loading section .rdata, size 0xbf38 lma ffffffff88027620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033558
=>  Loading section .data, size 0x5a8 lma ffffffff88033570
=>  Start address ffffffff88000004
=>  Transfer rate: 1693824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 93/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl05.exe
Result: invalid   
Time: 0:00:00.254584 dl05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3bea8 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x78 lma ffffffff8803bea8
=>  Loading section .init, size 0x48 lma ffffffff8803bf20
=>  Loading section .fini, size 0x30 lma ffffffff8803bf68
=>  Loading section .ctors, size 0x18 lma ffffffff8803bf98
=>  Loading section .dtors, size 0x8 lma ffffffff8803bfb0
=>  Loading section .rdata, size 0x14968 lma ffffffff8803bfc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88050928
=>  Loading section .rel.dyn, size 0x18 lma ffffffff88050940
=>  Loading section .data, size 0x66c lma ffffffff88050958
=>  Loading section .sdata, size 0x4 lma ffffffff88050fc8
=>  Start address ffffffff88000004
=>  Transfer rate: 2653696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 94/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl06.exe
Result: invalid   
Time: 0:00:00.260147 dl06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x279d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880279d0
=>  Loading section .init, size 0x48 lma ffffffff88027a40
=>  Loading section .fini, size 0x30 lma ffffffff88027a88
=>  Loading section .ctors, size 0x8 lma ffffffff88027ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88027ac0
=>  Loading section .rdata, size 0xe820 lma ffffffff88027ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880362f0
=>  Loading section .data, size 0x5b8 lma ffffffff88036308
=>  Start address ffffffff88000004
=>  Transfer rate: 1787328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 95/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl07.exe
Result: invalid   
Time: 0:00:00.292307 dl07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027de0
=>  Loading section .init, size 0x48 lma ffffffff88027e50
=>  Loading section .fini, size 0x30 lma ffffffff88027e98
=>  Loading section .ctors, size 0x8 lma ffffffff88027ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88027ed0
=>  Loading section .rdata, size 0x189f8 lma ffffffff88027ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880408d8
=>  Loading section .data, size 0x5a8 lma ffffffff880408f0
=>  Start address ffffffff88000004
=>  Transfer rate: 2126976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 96/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:88  W:0   | mipstx39/jmr3904: dl08.exe
Result: invalid   
Time: 0:00:00.287990 dl08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27a90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027a90
=>  Loading section .init, size 0x48 lma ffffffff88027b00
=>  Loading section .fini, size 0x30 lma ffffffff88027b48
=>  Loading section .ctors, size 0x8 lma ffffffff88027b78
=>  Loading section .dtors, size 0x8 lma ffffffff88027b80
=>  Loading section .rdata, size 0x188f0 lma ffffffff88027b90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88040480
=>  Loading section .data, size 0x5a8 lma ffffffff88040498
=>  Start address ffffffff88000004
=>  Transfer rate: 2118080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 97/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: dl09.exe
Result: invalid   
Time: 0:00:00.269795 dl09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027d00
=>  Loading section .init, size 0x48 lma ffffffff88027d70
=>  Loading section .fini, size 0x30 lma ffffffff88027db8
=>  Loading section .ctors, size 0x8 lma ffffffff88027de8
=>  Loading section .dtors, size 0x8 lma ffffffff88027df0
=>  Loading section .rdata, size 0x161c8 lma ffffffff88027e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8803dfc8
=>  Loading section .data, size 0x5a8 lma ffffffff8803dfe0
=>  Start address ffffffff88000004
=>  Transfer rate: 2042880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 98/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: dl10.exe
Result: invalid   
Time: 0:00:00.270107 dl10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x79fe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88079fe0
=>  Loading section .init, size 0x48 lma ffffffff8807a060
=>  Loading section .fini, size 0x30 lma ffffffff8807a0a8
=>  Loading section .ctors, size 0x8 lma ffffffff8807a0d8
=>  Loading section .dtors, size 0x8 lma ffffffff8807a0e0
=>  Loading section .rdata, size 0x26308 lma ffffffff8807a0f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a03f8
=>  Loading section .data, size 0x172c lma ffffffff880a0410
=>  Start address ffffffff88000004
=>  Transfer rate: 5298592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 99/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid   
Time: 0:00:00.269254 dumpbuf01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880101b0
=>  Loading section .init, size 0x48 lma ffffffff88010220
=>  Loading section .fini, size 0x30 lma ffffffff88010268
=>  Loading section .ctors, size 0x8 lma ffffffff88010298
=>  Loading section .dtors, size 0x8 lma ffffffff880102a0
=>  Loading section .rdata, size 0x1b1c lma ffffffff880102b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011dd0
=>  Loading section .data, size 0x440 lma ffffffff88011de8
=>  Start address ffffffff88000004
=>  Transfer rate: 594144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[100/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: exit01.exe
Result: invalid   
Time: 0:00:00.255178 exit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010370
=>  Loading section .init, size 0x48 lma ffffffff880103e0
=>  Loading section .fini, size 0x30 lma ffffffff88010428
=>  Loading section .ctors, size 0x8 lma ffffffff88010458
=>  Loading section .dtors, size 0x8 lma ffffffff88010460
=>  Loading section .rdata, size 0x1aa1 lma ffffffff88010470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f18
=>  Loading section .data, size 0x418 lma ffffffff88011f30
=>  Start address ffffffff88000004
=>  Transfer rate: 596424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[101/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: exit02.exe
Result: invalid   
Time: 0:00:00.285468 exit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010060
=>  Loading section .init, size 0x48 lma ffffffff880100d0
=>  Loading section .fini, size 0x30 lma ffffffff88010118
=>  Loading section .ctors, size 0x8 lma ffffffff88010148
=>  Loading section .dtors, size 0x8 lma ffffffff88010150
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bc8
=>  Loading section .data, size 0x418 lma ffffffff88011be0
=>  Start address ffffffff88000004
=>  Transfer rate: 589640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[102/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: exit03.exe
Result: invalid   
Time: 0:00:00.506237 exit03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x969c8 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x78 lma ffffffff880969c8
=>  Loading section .init, size 0x48 lma ffffffff88096a40
=>  Loading section .fini, size 0x30 lma ffffffff88096a88
=>  Loading section .ctors, size 0x34 lma ffffffff88096ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88096aec
=>  Loading section .rdata, size 0xa444 lma ffffffff88096b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a0f48
=>  Loading section .rel.dyn, size 0x20 lma ffffffff880a0f60
=>  Loading section .data, size 0x738 lma ffffffff880a0f80
=>  Loading section .sdata, size 0x4 lma ffffffff880a16b8
=>  Start address ffffffff88000004
=>  Transfer rate: 5289312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[103/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: flashdisk01.exe
Result: invalid   
Time: 0:00:00.267380 flashdisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x303b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880303b0
=>  Loading section .init, size 0x48 lma ffffffff88030420
=>  Loading section .fini, size 0x30 lma ffffffff88030468
=>  Loading section .ctors, size 0x8 lma ffffffff88030498
=>  Loading section .dtors, size 0x8 lma ffffffff880304a0
=>  Loading section .rdata, size 0x62f8 lma ffffffff880304b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880367a8
=>  Loading section .data, size 0x5d0 lma ffffffff880367c0
=>  Start address ffffffff88000004
=>  Transfer rate: 1797184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[104/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:96  W:0   | mipstx39/jmr3904: getentropy01.exe
Result: invalid   
Time: 0:00:00.255770 getentropy01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f7b0
=>  Loading section .init, size 0x48 lma ffffffff8800f820
=>  Loading section .fini, size 0x30 lma ffffffff8800f868
=>  Loading section .ctors, size 0x8 lma ffffffff8800f898
=>  Loading section .dtors, size 0x8 lma ffffffff8800f8a0
=>  Loading section .rdata, size 0x1a19 lma ffffffff8800f8b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880112d0
=>  Loading section .data, size 0x408 lma ffffffff880112e8
=>  Start address ffffffff88000004
=>  Transfer rate: 571144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[105/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:103 W:0   | mipstx39/jmr3904: heapwalk.exe
Result: invalid   
Time: 0:00:00.255537 heapwalk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d10
=>  Loading section .init, size 0x48 lma ffffffff88010d80
=>  Loading section .fini, size 0x30 lma ffffffff88010dc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010df8
=>  Loading section .dtors, size 0x8 lma ffffffff88010e00
=>  Loading section .rdata, size 0x2421 lma ffffffff88010e10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013238
=>  Loading section .data, size 0x418 lma ffffffff88013250
=>  Start address ffffffff88000004
=>  Transfer rate: 635592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[106/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: i2c01.exe
Result: invalid   
Time: 0:00:00.256009 i2c01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x152c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880152c0
=>  Loading section .init, size 0x48 lma ffffffff88015330
=>  Loading section .fini, size 0x30 lma ffffffff88015378
=>  Loading section .ctors, size 0x8 lma ffffffff880153a8
=>  Loading section .dtors, size 0x8 lma ffffffff880153b0
=>  Loading section .rdata, size 0x1fd5 lma ffffffff880153c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017398
=>  Loading section .data, size 0x448 lma ffffffff880173b0
=>  Start address ffffffff88000004
=>  Transfer rate: 769896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[107/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: irqs01.exe
Result: invalid   
Time: 0:00:00.257922 irqs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16fc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88016fc0
=>  Loading section .init, size 0x48 lma ffffffff88017050
=>  Loading section .fini, size 0x30 lma ffffffff88017098
=>  Loading section .ctors, size 0x8 lma ffffffff880170c8
=>  Loading section .dtors, size 0x8 lma ffffffff880170d0
=>  Loading section .rdata, size 0x24d4 lma ffffffff880170e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880195b8
=>  Loading section .data, size 0x490 lma ffffffff880195d0
=>  Start address ffffffff88000004
=>  Transfer rate: 840352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[108/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: libfdt01.exe
Result: invalid   
Time: 0:00:00.252556 libfdt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011870
=>  Loading section .init, size 0x48 lma ffffffff880118e0
=>  Loading section .fini, size 0x30 lma ffffffff88011928
=>  Loading section .ctors, size 0x8 lma ffffffff88011958
=>  Loading section .dtors, size 0x8 lma ffffffff88011960
=>  Loading section .rdata, size 0x1dd9 lma ffffffff88011970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013750
=>  Loading section .data, size 0x418 lma ffffffff88013768
=>  Start address ffffffff88000004
=>  Transfer rate: 646024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[109/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: malloc02.exe
Result: invalid   
Time: 0:00:00.256629 malloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104f0
=>  Loading section .init, size 0x48 lma ffffffff88010560
=>  Loading section .fini, size 0x30 lma ffffffff880105a8
=>  Loading section .ctors, size 0x8 lma ffffffff880105d8
=>  Loading section .dtors, size 0x8 lma ffffffff880105e0
=>  Loading section .rdata, size 0x1e95 lma ffffffff880105f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012488
=>  Loading section .data, size 0x448 lma ffffffff880124a0
=>  Start address ffffffff88000004
=>  Transfer rate: 607976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[110/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: malloc03.exe
Result: invalid   
Time: 0:00:00.252478 malloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf300 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f300
=>  Loading section .init, size 0x48 lma ffffffff8800f370
=>  Loading section .fini, size 0x30 lma ffffffff8800f3b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f3e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f3f0
=>  Loading section .rdata, size 0x19c5 lma ffffffff8800f400
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010dc8
=>  Loading section .data, size 0x408 lma ffffffff88010de0
=>  Start address ffffffff88000004
=>  Transfer rate: 560872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[111/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: malloc04.exe
Result: invalid   
Time: 0:00:00.253992 malloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a50
=>  Loading section .init, size 0x48 lma ffffffff88010ac0
=>  Loading section .fini, size 0x30 lma ffffffff88010b08
=>  Loading section .ctors, size 0x8 lma ffffffff88010b38
=>  Loading section .dtors, size 0x8 lma ffffffff88010b40
=>  Loading section .rdata, size 0x1a95 lma ffffffff88010b50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125e8
=>  Loading section .data, size 0x418 lma ffffffff88012600
=>  Start address ffffffff88000004
=>  Transfer rate: 610408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[112/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:104 W:0   | mipstx39/jmr3904: malloctest.exe
Result: invalid   
Time: 0:00:00.251734 malloctest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016b40
=>  Loading section .init, size 0x48 lma ffffffff88016bb0
=>  Loading section .fini, size 0x30 lma ffffffff88016bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88016c28
=>  Loading section .dtors, size 0x8 lma ffffffff88016c30
=>  Loading section .rdata, size 0x40b0 lma ffffffff88016c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801acf0
=>  Loading section .data, size 0x5f0 lma ffffffff8801ad08
=>  Start address ffffffff88000004
=>  Transfer rate: 890752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[113/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: math.exe
Result: invalid   
Time: 0:00:00.253760 math.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x276b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880276b0
=>  Loading section .init, size 0x48 lma ffffffff88027720
=>  Loading section .fini, size 0x30 lma ffffffff88027768
=>  Loading section .ctors, size 0x8 lma ffffffff88027798
=>  Loading section .dtors, size 0x8 lma ffffffff880277a0
=>  Loading section .rdata, size 0x3978 lma ffffffff880277b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b128
=>  Loading section .data, size 0x5d0 lma ffffffff8802b140
=>  Start address ffffffff88000004
=>  Transfer rate: 1423424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[114/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: mathf.exe
Result: invalid   
Time: 0:00:00.259738 mathf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23bf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023bf0
=>  Loading section .init, size 0x48 lma ffffffff88023c60
=>  Loading section .fini, size 0x30 lma ffffffff88023ca8
=>  Loading section .ctors, size 0x8 lma ffffffff88023cd8
=>  Loading section .dtors, size 0x8 lma ffffffff88023ce0
=>  Loading section .rdata, size 0x32e0 lma ffffffff88023cf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026fd0
=>  Loading section .data, size 0x5b8 lma ffffffff88026fe8
=>  Start address ffffffff88000004
=>  Transfer rate: 1289408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[115/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: mathl.exe
Result: invalid   
Time: 0:00:00.258572 mathl.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017a30
=>  Loading section .init, size 0x48 lma ffffffff88017aa0
=>  Loading section .fini, size 0x30 lma ffffffff88017ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88017b18
=>  Loading section .dtors, size 0x8 lma ffffffff88017b20
=>  Loading section .rdata, size 0x1fc8 lma ffffffff88017b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019af8
=>  Loading section .data, size 0x5a8 lma ffffffff88019b10
=>  Start address ffffffff88000004
=>  Transfer rate: 853376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[116/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: md501.exe
Result: invalid   
Time: 0:00:00.257934 md501.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110e0
=>  Loading section .init, size 0x48 lma ffffffff88011150
=>  Loading section .fini, size 0x30 lma ffffffff88011198
=>  Loading section .ctors, size 0x8 lma ffffffff880111c8
=>  Loading section .dtors, size 0x8 lma ffffffff880111d0
=>  Loading section .rdata, size 0x1c89 lma ffffffff880111e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e70
=>  Loading section .data, size 0x458 lma ffffffff88012e88
=>  Start address ffffffff88000004
=>  Transfer rate: 628360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[117/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: monitor.exe
Result: invalid   
Time: 0:00:00.260477 monitor.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x276f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880276f0
=>  Loading section .init, size 0x48 lma ffffffff88027760
=>  Loading section .fini, size 0x30 lma ffffffff880277a8
=>  Loading section .ctors, size 0x8 lma ffffffff880277d8
=>  Loading section .dtors, size 0x8 lma ffffffff880277e0
=>  Loading section .rdata, size 0x4924 lma ffffffff880277f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c118
=>  Loading section .data, size 0x7c8 lma ffffffff8802c130
=>  Start address ffffffff88000004
=>  Transfer rate: 1460064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[118/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: monitor02.exe
Result: invalid   
Time: 0:00:00.255377 monitor02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x200c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880200c0
=>  Loading section .init, size 0x48 lma ffffffff88020140
=>  Loading section .fini, size 0x30 lma ffffffff88020188
=>  Loading section .ctors, size 0x8 lma ffffffff880201b8
=>  Loading section .dtors, size 0x8 lma ffffffff880201c0
=>  Loading section .rdata, size 0x3748 lma ffffffff880201d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023918
=>  Loading section .data, size 0x84c lma ffffffff88023930
=>  Start address ffffffff88000004
=>  Transfer rate: 1182624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[119/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: mouse01.exe
Result: invalid   
Time: 0:00:00.261302 mouse01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c5e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c5e0
=>  Loading section .init, size 0x48 lma ffffffff8801c660
=>  Loading section .fini, size 0x30 lma ffffffff8801c6a8
=>  Loading section .ctors, size 0x8 lma ffffffff8801c6d8
=>  Loading section .dtors, size 0x8 lma ffffffff8801c6e0
=>  Loading section .rdata, size 0x28f4 lma ffffffff8801c6f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801efe8
=>  Loading section .data, size 0x648 lma ffffffff8801f000
=>  Start address ffffffff88000004
=>  Transfer rate: 1028576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[120/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:112 W:0   | mipstx39/jmr3904: newlib01.exe
Result: invalid   
Time: 0:00:00.253270 newlib01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x154f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880154f0
=>  Loading section .init, size 0x48 lma ffffffff88015560
=>  Loading section .fini, size 0x30 lma ffffffff880155a8
=>  Loading section .ctors, size 0x8 lma ffffffff880155d8
=>  Loading section .dtors, size 0x8 lma ffffffff880155e0
=>  Loading section .rdata, size 0x1d65 lma ffffffff880155f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017358
=>  Loading section .data, size 0x454 lma ffffffff88017370
=>  Start address ffffffff88000004
=>  Transfer rate: 769480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[121/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: ofw01.exe
Result: invalid   
Time: 0:00:00.253266 ofw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012c30
=>  Loading section .init, size 0x48 lma ffffffff88012ca0
=>  Loading section .fini, size 0x30 lma ffffffff88012ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88012d18
=>  Loading section .dtors, size 0x8 lma ffffffff88012d20
=>  Loading section .rdata, size 0x1fed lma ffffffff88012d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d20
=>  Loading section .data, size 0x418 lma ffffffff88014d38
=>  Start address ffffffff88000004
=>  Transfer rate: 690728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[122/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: putenvtest.exe
Result: invalid   
Time: 0:00:00.254852 putenvtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a00
=>  Loading section .init, size 0x48 lma ffffffff88010a70
=>  Loading section .fini, size 0x30 lma ffffffff88010ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88010af0
=>  Loading section .rdata, size 0x19dd lma ffffffff88010b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e0
=>  Loading section .data, size 0x41c lma ffffffff880124f8
=>  Start address ffffffff88000004
=>  Transfer rate: 608328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[123/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid   
Time: 0:00:00.257438 pwdgrp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14350 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014350
=>  Loading section .init, size 0x48 lma ffffffff880143c0
=>  Loading section .fini, size 0x30 lma ffffffff88014408
=>  Loading section .ctors, size 0x8 lma ffffffff88014438
=>  Loading section .dtors, size 0x8 lma ffffffff88014440
=>  Loading section .rdata, size 0x1dfc lma ffffffff88014450
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016250
=>  Loading section .data, size 0x4a4 lma ffffffff88016268
=>  Start address ffffffff88000004
=>  Transfer rate: 735232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[124/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid   
Time: 0:00:00.254607 pwdgrp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012f00
=>  Loading section .init, size 0x48 lma ffffffff88012f70
=>  Loading section .fini, size 0x30 lma ffffffff88012fb8
=>  Loading section .ctors, size 0x8 lma ffffffff88012fe8
=>  Loading section .dtors, size 0x8 lma ffffffff88012ff0
=>  Loading section .rdata, size 0x1d74 lma ffffffff88013000
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d78
=>  Loading section .data, size 0x43c lma ffffffff88014d90
=>  Start address ffffffff88000004
=>  Transfer rate: 691712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[125/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: rbheap01.exe
Result: invalid   
Time: 0:00:00.258033 rbheap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011210
=>  Loading section .init, size 0x48 lma ffffffff88011280
=>  Loading section .fini, size 0x30 lma ffffffff880112c8
=>  Loading section .ctors, size 0x8 lma ffffffff880112f8
=>  Loading section .dtors, size 0x8 lma ffffffff88011300
=>  Loading section .rdata, size 0x1cd9 lma ffffffff88011310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ff0
=>  Loading section .data, size 0x418 lma ffffffff88013008
=>  Start address ffffffff88000004
=>  Transfer rate: 630920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[126/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: rcxx01.exe
Result: invalid   
Time: 0:00:00.253814 rcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9b2bc lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x84 lma ffffffff8809b2bc
=>  Loading section .init, size 0x48 lma ffffffff8809b340
=>  Loading section .fini, size 0x30 lma ffffffff8809b388
=>  Loading section .ctors, size 0x44 lma ffffffff8809b3b8
=>  Loading section .dtors, size 0x8 lma ffffffff8809b3fc
=>  Loading section .rdata, size 0xab74 lma ffffffff8809b410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a5f88
=>  Loading section .rel.dyn, size 0x18 lma ffffffff880a5fa0
=>  Loading section .data, size 0x7b8 lma ffffffff880a5fb8
=>  Loading section .sdata, size 0x4 lma ffffffff880a6770
=>  Start address ffffffff88000004
=>  Transfer rate: 5454624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[127/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: record01.exe
Result: invalid   
Time: 0:00:00.257515 record01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111a0
=>  Loading section .init, size 0x48 lma ffffffff88011210
=>  Loading section .fini, size 0x30 lma ffffffff88011258
=>  Loading section .ctors, size 0x8 lma ffffffff88011288
=>  Loading section .dtors, size 0x8 lma ffffffff88011290
=>  Loading section .rdata, size 0x1ec1 lma ffffffff880112a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013168
=>  Loading section .data, size 0x418 lma ffffffff88013180
=>  Start address ffffffff88000004
=>  Transfer rate: 633928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[128/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:120 W:0   | mipstx39/jmr3904: record02.exe
Result: invalid   
Time: 0:00:00.268043 record02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88019060
=>  Loading section .init, size 0x48 lma ffffffff880190e0
=>  Loading section .fini, size 0x30 lma ffffffff88019128
=>  Loading section .ctors, size 0x8 lma ffffffff88019158
=>  Loading section .dtors, size 0x8 lma ffffffff88019160
=>  Loading section .rdata, size 0x8bf5 lma ffffffff88019170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021d68
=>  Loading section .data, size 0x450 lma ffffffff88021d80
=>  Start address ffffffff88000004
=>  Transfer rate: 1117736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[129/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:121 W:0   | mipstx39/jmr3904: rtmonuse.exe
Result: invalid   
Time: 0:00:00.251487 rtmonuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x123d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880123d0
=>  Loading section .init, size 0x48 lma ffffffff88012440
=>  Loading section .fini, size 0x30 lma ffffffff88012488
=>  Loading section .ctors, size 0x8 lma ffffffff880124b8
=>  Loading section .dtors, size 0x8 lma ffffffff880124c0
=>  Loading section .rdata, size 0x2324 lma ffffffff880124d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880147f8
=>  Loading section .data, size 0x490 lma ffffffff88014810
=>  Start address ffffffff88000004
=>  Transfer rate: 681120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[130/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:128 W:0   | mipstx39/jmr3904: sha.exe
Result: invalid   
Time: 0:00:00.253577 sha.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b9e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801b9e0
=>  Loading section .init, size 0x48 lma ffffffff8801ba50
=>  Loading section .fini, size 0x30 lma ffffffff8801ba98
=>  Loading section .ctors, size 0x8 lma ffffffff8801bac8
=>  Loading section .dtors, size 0x8 lma ffffffff8801bad0
=>  Loading section .rdata, size 0x1f1d lma ffffffff8801bae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801da00
=>  Loading section .data, size 0x408 lma ffffffff8801da18
=>  Start address ffffffff88000004
=>  Transfer rate: 979112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[131/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: shell01.exe
Result: invalid   
Time: 0:00:00.281903 shell01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x315f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880315f0
=>  Loading section .init, size 0x48 lma ffffffff88031670
=>  Loading section .fini, size 0x30 lma ffffffff880316b8
=>  Loading section .ctors, size 0x8 lma ffffffff880316e8
=>  Loading section .dtors, size 0x8 lma ffffffff880316f0
=>  Loading section .rdata, size 0x5ec8 lma ffffffff88031700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880375c8
=>  Loading section .data, size 0x944 lma ffffffff880375e0
=>  Start address ffffffff88000004
=>  Transfer rate: 1833184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[132/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid   
Time: 0:00:00.256263 sparsedisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x169a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880169a0
=>  Loading section .init, size 0x48 lma ffffffff88016a10
=>  Loading section .fini, size 0x30 lma ffffffff88016a58
=>  Loading section .ctors, size 0x8 lma ffffffff88016a88
=>  Loading section .dtors, size 0x8 lma ffffffff88016a90
=>  Loading section .rdata, size 0x1d45 lma ffffffff88016aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880187e8
=>  Loading section .data, size 0x440 lma ffffffff88018800
=>  Start address ffffffff88000004
=>  Transfer rate: 811432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[133/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: spi01.exe
Result: invalid   
Time: 0:00:00.254669 spi01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119a0
=>  Loading section .init, size 0x48 lma ffffffff88011a10
=>  Loading section .fini, size 0x30 lma ffffffff88011a58
=>  Loading section .ctors, size 0x8 lma ffffffff88011a88
=>  Loading section .dtors, size 0x8 lma ffffffff88011a90
=>  Loading section .rdata, size 0x1c8d lma ffffffff88011aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013730
=>  Loading section .data, size 0x458 lma ffffffff88013748
=>  Start address ffffffff88000004
=>  Transfer rate: 646312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[134/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: stackchk.exe
Result: invalid   
Time: 0:00:00.260652 stackchk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012070
=>  Loading section .init, size 0x48 lma ffffffff880120e0
=>  Loading section .fini, size 0x30 lma ffffffff88012128
=>  Loading section .ctors, size 0x8 lma ffffffff88012158
=>  Loading section .dtors, size 0x8 lma ffffffff88012160
=>  Loading section .rdata, size 0x22f4 lma ffffffff88012170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014468
=>  Loading section .data, size 0x5c0 lma ffffffff88014480
=>  Start address ffffffff88000004
=>  Transfer rate: 676256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[135/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: stackchk01.exe
Result: invalid   
Time: 0:00:00.261383 stackchk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf6a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f6a0
=>  Loading section .init, size 0x48 lma ffffffff8800f710
=>  Loading section .fini, size 0x30 lma ffffffff8800f758
=>  Loading section .ctors, size 0x8 lma ffffffff8800f788
=>  Loading section .dtors, size 0x8 lma ffffffff8800f790
=>  Loading section .rdata, size 0x1aed lma ffffffff8800f7a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011290
=>  Loading section .data, size 0x408 lma ffffffff880112a8
=>  Start address ffffffff88000004
=>  Transfer rate: 570664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[136/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: stackchk02.exe
Result: invalid   
Time: 0:00:00.254588 stackchk02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf590 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f590
=>  Loading section .init, size 0x48 lma ffffffff8800f600
=>  Loading section .fini, size 0x30 lma ffffffff8800f648
=>  Loading section .ctors, size 0x8 lma ffffffff8800f678
=>  Loading section .dtors, size 0x8 lma ffffffff8800f680
=>  Loading section .rdata, size 0x1a39 lma ffffffff8800f690
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880110d0
=>  Loading section .data, size 0x408 lma ffffffff880110e8
=>  Start address ffffffff88000004
=>  Transfer rate: 567048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[137/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:129 W:0   | mipstx39/jmr3904: stringto01.exe
Result: invalid   
Time: 0:00:00.253692 stringto01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016d90
=>  Loading section .init, size 0x48 lma ffffffff88016e00
=>  Loading section .fini, size 0x30 lma ffffffff88016e48
=>  Loading section .ctors, size 0x8 lma ffffffff88016e78
=>  Loading section .dtors, size 0x8 lma ffffffff88016e80
=>  Loading section .rdata, size 0x3a28 lma ffffffff88016e90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a8b8
=>  Loading section .data, size 0x570 lma ffffffff8801a8d0
=>  Start address ffffffff88000004
=>  Transfer rate: 881088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[138/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: tar01.exe
Result: invalid   
Time: 0:00:00.251582 tar01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015790
=>  Loading section .init, size 0x48 lma ffffffff88015800
=>  Loading section .fini, size 0x30 lma ffffffff88015848
=>  Loading section .ctors, size 0x8 lma ffffffff88015878
=>  Loading section .dtors, size 0x8 lma ffffffff88015880
=>  Loading section .rdata, size 0x86a8 lma ffffffff88015890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801df38
=>  Loading section .data, size 0x408 lma ffffffff8801df50
=>  Start address ffffffff88000004
=>  Transfer rate: 989824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[139/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: tar02.exe
Result: invalid   
Time: 0:00:00.256716 tar02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112d0
=>  Loading section .init, size 0x48 lma ffffffff88011340
=>  Loading section .fini, size 0x30 lma ffffffff88011388
=>  Loading section .ctors, size 0x8 lma ffffffff880113b8
=>  Loading section .dtors, size 0x8 lma ffffffff880113c0
=>  Loading section .rdata, size 0x52ac lma ffffffff880113d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016680
=>  Loading section .data, size 0x408 lma ffffffff88016698
=>  Start address ffffffff88000004
=>  Transfer rate: 742560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[140/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: tar03.exe
Result: invalid   
Time: 0:00:00.259738 tar03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113f0
=>  Loading section .init, size 0x48 lma ffffffff88011460
=>  Loading section .fini, size 0x30 lma ffffffff880114a8
=>  Loading section .ctors, size 0x8 lma ffffffff880114d8
=>  Loading section .dtors, size 0x8 lma ffffffff880114e0
=>  Loading section .rdata, size 0x2548 lma ffffffff880114f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a38
=>  Loading section .data, size 0x418 lma ffffffff88013a50
=>  Start address ffffffff88000004
=>  Transfer rate: 652032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[141/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios.exe
Result: invalid   
Time: 0:00:00.264567 termios.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88024960
=>  Loading section .init, size 0x48 lma ffffffff880249d0
=>  Loading section .fini, size 0x30 lma ffffffff88024a18
=>  Loading section .ctors, size 0x8 lma ffffffff88024a48
=>  Loading section .dtors, size 0x8 lma ffffffff88024a50
=>  Loading section .rdata, size 0x4464 lma ffffffff88024a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028ec8
=>  Loading section .data, size 0x59c lma ffffffff88028ee0
=>  Start address ffffffff88000004
=>  Transfer rate: 1352576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[142/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios01.exe
Result: invalid   
Time: 0:00:00.266656 termios01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17290 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017290
=>  Loading section .init, size 0x48 lma ffffffff88017300
=>  Loading section .fini, size 0x30 lma ffffffff88017348
=>  Loading section .ctors, size 0x8 lma ffffffff88017378
=>  Loading section .dtors, size 0x8 lma ffffffff88017380
=>  Loading section .rdata, size 0x3acc lma ffffffff88017390
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ae60
=>  Loading section .data, size 0x4d0 lma ffffffff8801ae78
=>  Start address ffffffff88000004
=>  Transfer rate: 891360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[143/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios02.exe
Result: invalid   
Time: 0:00:00.267651 termios02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013530
=>  Loading section .init, size 0x48 lma ffffffff880135a0
=>  Loading section .fini, size 0x30 lma ffffffff880135e8
=>  Loading section .ctors, size 0x8 lma ffffffff88013618
=>  Loading section .dtors, size 0x8 lma ffffffff88013620
=>  Loading section .rdata, size 0x1e14 lma ffffffff88013630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015448
=>  Loading section .data, size 0x408 lma ffffffff88015460
=>  Start address ffffffff88000004
=>  Transfer rate: 705248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[144/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios03.exe
Result: invalid   
Time: 0:00:00.260516 termios03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014530
=>  Loading section .init, size 0x48 lma ffffffff880145a0
=>  Loading section .fini, size 0x30 lma ffffffff880145e8
=>  Loading section .ctors, size 0x8 lma ffffffff88014618
=>  Loading section .dtors, size 0x8 lma ffffffff88014620
=>  Loading section .rdata, size 0x2204 lma ffffffff88014630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016838
=>  Loading section .data, size 0x458 lma ffffffff88016850
=>  Start address ffffffff88000004
=>  Transfer rate: 746720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[145/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios04.exe
Result: invalid   
Time: 0:00:00.269476 termios04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14880 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014880
=>  Loading section .init, size 0x48 lma ffffffff88014900
=>  Loading section .fini, size 0x30 lma ffffffff88014948
=>  Loading section .ctors, size 0x8 lma ffffffff88014978
=>  Loading section .dtors, size 0x8 lma ffffffff88014980
=>  Loading section .rdata, size 0x2140 lma ffffffff88014990
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ad0
=>  Loading section .data, size 0x488 lma ffffffff88016ae8
=>  Start address ffffffff88000004
=>  Transfer rate: 752448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[146/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios05.exe
Result: invalid   
Time: 0:00:00.257752 termios05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014c50
=>  Loading section .init, size 0x48 lma ffffffff88014cd0
=>  Loading section .fini, size 0x30 lma ffffffff88014d18
=>  Loading section .ctors, size 0x8 lma ffffffff88014d48
=>  Loading section .dtors, size 0x8 lma ffffffff88014d50
=>  Loading section .rdata, size 0x21a4 lma ffffffff88014d60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016f08
=>  Loading section .data, size 0x488 lma ffffffff88016f20
=>  Start address ffffffff88000004
=>  Transfer rate: 761056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[147/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios06.exe
Result: invalid   
Time: 0:00:00.259263 termios06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014940
=>  Loading section .init, size 0x48 lma ffffffff880149b0
=>  Loading section .fini, size 0x30 lma ffffffff880149f8
=>  Loading section .ctors, size 0x8 lma ffffffff88014a28
=>  Loading section .dtors, size 0x8 lma ffffffff88014a30
=>  Loading section .rdata, size 0x22f4 lma ffffffff88014a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016d38
=>  Loading section .data, size 0x468 lma ffffffff88016d50
=>  Start address ffffffff88000004
=>  Transfer rate: 757088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[148/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios07.exe
Result: invalid   
Time: 0:00:00.259642 termios07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x149b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880149b0
=>  Loading section .init, size 0x48 lma ffffffff88014a30
=>  Loading section .fini, size 0x30 lma ffffffff88014a78
=>  Loading section .ctors, size 0x8 lma ffffffff88014aa8
=>  Loading section .dtors, size 0x8 lma ffffffff88014ab0
=>  Loading section .rdata, size 0x21c8 lma ffffffff88014ac0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c88
=>  Loading section .data, size 0x488 lma ffffffff88016ca0
=>  Start address ffffffff88000004
=>  Transfer rate: 755968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[149/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios08.exe
Result: invalid   
Time: 0:00:00.256180 termios08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14170 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014170
=>  Loading section .init, size 0x48 lma ffffffff880141e0
=>  Loading section .fini, size 0x30 lma ffffffff88014228
=>  Loading section .ctors, size 0x8 lma ffffffff88014258
=>  Loading section .dtors, size 0x8 lma ffffffff88014260
=>  Loading section .rdata, size 0x2130 lma ffffffff88014270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880163a0
=>  Loading section .data, size 0x458 lma ffffffff880163b8
=>  Start address ffffffff88000004
=>  Transfer rate: 737344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[150/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios09.exe
Result: invalid   
Time: 0:00:00.261904 termios09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18bf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018bf0
=>  Loading section .init, size 0x48 lma ffffffff88018c60
=>  Loading section .fini, size 0x30 lma ffffffff88018ca8
=>  Loading section .ctors, size 0x8 lma ffffffff88018cd8
=>  Loading section .dtors, size 0x8 lma ffffffff88018ce0
=>  Loading section .rdata, size 0x2334 lma ffffffff88018cf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b028
=>  Loading section .data, size 0x610 lma ffffffff8801b040
=>  Start address ffffffff88000004
=>  Transfer rate: 897568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[151/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios10.exe
Result: invalid   
Time: 0:00:00.259644 termios10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16320 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016320
=>  Loading section .init, size 0x48 lma ffffffff880163a0
=>  Loading section .fini, size 0x30 lma ffffffff880163e8
=>  Loading section .ctors, size 0x8 lma ffffffff88016418
=>  Loading section .dtors, size 0x8 lma ffffffff88016420
=>  Loading section .rdata, size 0x23b0 lma ffffffff88016430
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880187e0
=>  Loading section .data, size 0x4d8 lma ffffffff880187f8
=>  Start address ffffffff88000004
=>  Transfer rate: 812608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[152/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios11.exe
Result: invalid   
Time: 0:00:00.271141 termios11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16a00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016a00
=>  Loading section .init, size 0x48 lma ffffffff88016a80
=>  Loading section .fini, size 0x30 lma ffffffff88016ac8
=>  Loading section .ctors, size 0x8 lma ffffffff88016af8
=>  Loading section .dtors, size 0x8 lma ffffffff88016b00
=>  Loading section .rdata, size 0x23c8 lma ffffffff88016b10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018ed8
=>  Loading section .data, size 0x508 lma ffffffff88018ef0
=>  Start address ffffffff88000004
=>  Transfer rate: 827264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[153/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: top.exe
Result: invalid   
Time: 0:00:00.256634 top.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ea00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ea00
=>  Loading section .init, size 0x48 lma ffffffff8801ea70
=>  Loading section .fini, size 0x30 lma ffffffff8801eab8
=>  Loading section .ctors, size 0x8 lma ffffffff8801eae8
=>  Loading section .dtors, size 0x8 lma ffffffff8801eaf0
=>  Loading section .rdata, size 0x2c18 lma ffffffff8801eb00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021718
=>  Loading section .data, size 0x5b8 lma ffffffff88021730
=>  Start address ffffffff88000004
=>  Transfer rate: 1107712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[154/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: ttest01.exe
Result: invalid   
Time: 0:00:00.256885 ttest01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb50 lma ffffffff88025130
=>  Loading section .init, size 0x48 lma ffffffff88025c80
=>  Loading section .fini, size 0x30 lma ffffffff88025cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88025cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88025d00
=>  Loading section .rdata, size 0x1c204 lma ffffffff88025d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88041f18
=>  Loading section .data, size 0x1b48 lma ffffffff88041f30
=>  Start address ffffffff88000004
=>  Transfer rate: 2216800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[155/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: ttest02.exe
Result: invalid   
Time: 0:00:00.267354 ttest02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88017b50
=>  Loading section .init, size 0x48 lma ffffffff88017be0
=>  Loading section .fini, size 0x30 lma ffffffff88017c28
=>  Loading section .ctors, size 0x8 lma ffffffff88017c58
=>  Loading section .dtors, size 0x8 lma ffffffff88017c60
=>  Loading section .rdata, size 0x25a8 lma ffffffff88017c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a218
=>  Loading section .data, size 0x588 lma ffffffff8801a230
=>  Start address ffffffff88000004
=>  Transfer rate: 867712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[156/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: tztest.exe
Result: invalid   
Time: 0:00:00.264540 tztest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ed0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015ed0
=>  Loading section .init, size 0x48 lma ffffffff88015f40
=>  Loading section .fini, size 0x30 lma ffffffff88015f88
=>  Loading section .ctors, size 0x8 lma ffffffff88015fb8
=>  Loading section .dtors, size 0x8 lma ffffffff88015fc0
=>  Loading section .rdata, size 0x24a8 lma ffffffff88015fd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018478
=>  Loading section .data, size 0x614 lma ffffffff88018490
=>  Start address ffffffff88000004
=>  Transfer rate: 808160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[157/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: uid01.exe
Result: invalid   
Time: 0:00:00.254175 uid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c3c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c3c0
=>  Loading section .init, size 0x48 lma ffffffff8801c440
=>  Loading section .fini, size 0x30 lma ffffffff8801c488
=>  Loading section .ctors, size 0x8 lma ffffffff8801c4b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801c4c0
=>  Loading section .rdata, size 0x2854 lma ffffffff8801c4d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ed28
=>  Loading section .data, size 0x648 lma ffffffff8801ed40
=>  Start address ffffffff88000004
=>  Transfer rate: 1022944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[158/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: utf8proc01.exe
Result: invalid   
Time: 0:00:00.262924 utf8proc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b70
=>  Loading section .init, size 0x48 lma ffffffff88011be0
=>  Loading section .fini, size 0x30 lma ffffffff88011c28
=>  Loading section .ctors, size 0x8 lma ffffffff88011c58
=>  Loading section .dtors, size 0x8 lma ffffffff88011c60
=>  Loading section .rdata, size 0x6cf19 lma ffffffff88011c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8807eb90
=>  Loading section .data, size 0x418 lma ffffffff8807eba8
=>  Start address ffffffff88000004
=>  Transfer rate: 4160904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[159/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx01.exe
Result: invalid   
Time: 0:00:00.263183 psx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17330 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017330
=>  Loading section .init, size 0x48 lma ffffffff880173a0
=>  Loading section .fini, size 0x30 lma ffffffff880173e8
=>  Loading section .ctors, size 0x8 lma ffffffff88017418
=>  Loading section .dtors, size 0x8 lma ffffffff88017420
=>  Loading section .rdata, size 0x2508 lma ffffffff88017430
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019938
=>  Loading section .data, size 0x584 lma ffffffff88019950
=>  Start address ffffffff88000004
=>  Transfer rate: 849504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[160/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx02.exe
Result: invalid   
Time: 0:00:00.258415 psx02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a4c0
=>  Loading section .init, size 0x48 lma ffffffff8801a530
=>  Loading section .fini, size 0x30 lma ffffffff8801a578
=>  Loading section .ctors, size 0x8 lma ffffffff8801a5a8
=>  Loading section .dtors, size 0x8 lma ffffffff8801a5b0
=>  Loading section .rdata, size 0x25f0 lma ffffffff8801a5c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cbb0
=>  Loading section .data, size 0x618 lma ffffffff8801cbc8
=>  Start address ffffffff88000004
=>  Transfer rate: 954048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[161/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx03.exe
Result: invalid   
Time: 0:00:00.258182 psx03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1aa80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801aa80
=>  Loading section .init, size 0x48 lma ffffffff8801aaf0
=>  Loading section .fini, size 0x30 lma ffffffff8801ab38
=>  Loading section .ctors, size 0x8 lma ffffffff8801ab68
=>  Loading section .dtors, size 0x8 lma ffffffff8801ab70
=>  Loading section .rdata, size 0x26f4 lma ffffffff8801ab80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d278
=>  Loading section .data, size 0x618 lma ffffffff8801d290
=>  Start address ffffffff88000004
=>  Transfer rate: 967904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[162/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx04.exe
Result: invalid   
Time: 0:00:00.255306 psx04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a6a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a6a0
=>  Loading section .init, size 0x48 lma ffffffff8801a710
=>  Loading section .fini, size 0x30 lma ffffffff8801a758
=>  Loading section .ctors, size 0x8 lma ffffffff8801a788
=>  Loading section .dtors, size 0x8 lma ffffffff8801a790
=>  Loading section .rdata, size 0x3818 lma ffffffff8801a7a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801dfb8
=>  Loading section .data, size 0x644 lma ffffffff8801dfd0
=>  Start address ffffffff88000004
=>  Transfer rate: 995424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[163/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx05.exe
Result: invalid   
Time: 0:00:00.263280 psx05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bd70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801bd70
=>  Loading section .init, size 0x48 lma ffffffff8801bde0
=>  Loading section .fini, size 0x30 lma ffffffff8801be28
=>  Loading section .ctors, size 0x8 lma ffffffff8801be58
=>  Loading section .dtors, size 0x8 lma ffffffff8801be60
=>  Loading section .rdata, size 0x34c4 lma ffffffff8801be70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f338
=>  Loading section .data, size 0x61c lma ffffffff8801f350
=>  Start address ffffffff88000004
=>  Transfer rate: 1035008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[164/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx06.exe
Result: invalid   
Time: 0:00:00.252826 psx06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17be0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017be0
=>  Loading section .init, size 0x48 lma ffffffff88017c50
=>  Loading section .fini, size 0x30 lma ffffffff88017c98
=>  Loading section .ctors, size 0x8 lma ffffffff88017cc8
=>  Loading section .dtors, size 0x8 lma ffffffff88017cd0
=>  Loading section .rdata, size 0x23e4 lma ffffffff88017ce0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a0c8
=>  Loading section .data, size 0x684 lma ffffffff8801a0e0
=>  Start address ffffffff88000004
=>  Transfer rate: 867008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[165/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx07.exe
Result: invalid   
Time: 0:00:00.259707 psx07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c0d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801c0d0
=>  Loading section .init, size 0x48 lma ffffffff8801c140
=>  Loading section .fini, size 0x30 lma ffffffff8801c188
=>  Loading section .ctors, size 0x8 lma ffffffff8801c1b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801c1c0
=>  Loading section .rdata, size 0x4acc lma ffffffff8801c1d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020ca0
=>  Loading section .data, size 0x61c lma ffffffff88020cb8
=>  Start address ffffffff88000004
=>  Transfer rate: 1087040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[166/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx08.exe
Result: invalid   
Time: 0:00:00.257589 psx08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x175d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880175d0
=>  Loading section .init, size 0x48 lma ffffffff88017640
=>  Loading section .fini, size 0x30 lma ffffffff88017688
=>  Loading section .ctors, size 0x8 lma ffffffff880176b8
=>  Loading section .dtors, size 0x8 lma ffffffff880176c0
=>  Loading section .rdata, size 0x246c lma ffffffff880176d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019b40
=>  Loading section .data, size 0x61c lma ffffffff88019b58
=>  Start address ffffffff88000004
=>  Transfer rate: 854848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[167/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx09.exe
Result: invalid   
Time: 0:00:00.267474 psx09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x200d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880200d0
=>  Loading section .init, size 0x48 lma ffffffff88020140
=>  Loading section .fini, size 0x30 lma ffffffff88020188
=>  Loading section .ctors, size 0x8 lma ffffffff880201b8
=>  Loading section .dtors, size 0x8 lma ffffffff880201c0
=>  Loading section .rdata, size 0x32ac lma ffffffff880201d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023480
=>  Loading section .data, size 0x610 lma ffffffff88023498
=>  Start address ffffffff88000004
=>  Transfer rate: 1168608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[168/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx10.exe
Result: invalid   
Time: 0:00:00.259116 psx10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13be0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013be0
=>  Loading section .init, size 0x48 lma ffffffff88013c50
=>  Loading section .fini, size 0x30 lma ffffffff88013c98
=>  Loading section .ctors, size 0x8 lma ffffffff88013cc8
=>  Loading section .dtors, size 0x8 lma ffffffff88013cd0
=>  Loading section .rdata, size 0x2444 lma ffffffff88013ce0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016128
=>  Loading section .data, size 0x424 lma ffffffff88016140
=>  Start address ffffffff88000004
=>  Transfer rate: 731840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[169/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx11.exe
Result: invalid   
Time: 0:00:00.263963 psx11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017380
=>  Loading section .init, size 0x48 lma ffffffff880173f0
=>  Loading section .fini, size 0x30 lma ffffffff88017438
=>  Loading section .ctors, size 0x8 lma ffffffff88017468
=>  Loading section .dtors, size 0x8 lma ffffffff88017470
=>  Loading section .rdata, size 0x22b8 lma ffffffff88017480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019738
=>  Loading section .data, size 0x610 lma ffffffff88019750
=>  Start address ffffffff88000004
=>  Transfer rate: 846528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[170/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx12.exe
Result: invalid   
Time: 0:00:00.251424 psx12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017a20
=>  Loading section .init, size 0x48 lma ffffffff88017a90
=>  Loading section .fini, size 0x30 lma ffffffff88017ad8
=>  Loading section .ctors, size 0x8 lma ffffffff88017b08
=>  Loading section .dtors, size 0x8 lma ffffffff88017b10
=>  Loading section .rdata, size 0x22d4 lma ffffffff88017b20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019df8
=>  Loading section .data, size 0x61c lma ffffffff88019e10
=>  Start address ffffffff88000004
=>  Transfer rate: 860416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[171/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psx13.exe
Result: invalid   
Time: 0:00:00.259395 psx13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17990 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017990
=>  Loading section .init, size 0x48 lma ffffffff88017a00
=>  Loading section .fini, size 0x30 lma ffffffff88017a48
=>  Loading section .ctors, size 0x8 lma ffffffff88017a78
=>  Loading section .dtors, size 0x8 lma ffffffff88017a80
=>  Loading section .rdata, size 0x1c65 lma ffffffff88017a90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880196f8
=>  Loading section .data, size 0x424 lma ffffffff88019710
=>  Start address ffffffff88000004
=>  Transfer rate: 842056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[172/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psx14.exe
Result: invalid   
Time: 0:00:00.255838 psx14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112c0
=>  Loading section .init, size 0x48 lma ffffffff88011330
=>  Loading section .fini, size 0x30 lma ffffffff88011378
=>  Loading section .ctors, size 0x8 lma ffffffff880113a8
=>  Loading section .dtors, size 0x8 lma ffffffff880113b0
=>  Loading section .rdata, size 0x2189 lma ffffffff880113c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013550
=>  Loading section .data, size 0x418 lma ffffffff88013568
=>  Start address ffffffff88000004
=>  Transfer rate: 641928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[173/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psx15.exe
Result: invalid   
Time: 0:00:00.258174 psx15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10340 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010340
=>  Loading section .init, size 0x48 lma ffffffff880103b0
=>  Loading section .fini, size 0x30 lma ffffffff880103f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010428
=>  Loading section .dtors, size 0x8 lma ffffffff88010430
=>  Loading section .rdata, size 0x1a11 lma ffffffff88010440
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e58
=>  Loading section .data, size 0x418 lma ffffffff88011e70
=>  Start address ffffffff88000004
=>  Transfer rate: 594888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[174/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psx16.exe
Result: invalid   
Time: 0:00:00.257256 psx16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011920
=>  Loading section .init, size 0x48 lma ffffffff88011990
=>  Loading section .fini, size 0x30 lma ffffffff880119d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a08
=>  Loading section .dtors, size 0x8 lma ffffffff88011a10
=>  Loading section .rdata, size 0x1b24 lma ffffffff88011a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013548
=>  Loading section .data, size 0x424 lma ffffffff88013560
=>  Start address ffffffff88000004
=>  Transfer rate: 641984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[175/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxaio01.exe
Result: invalid   
Time: 0:00:00.259185 psxaio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014b70
=>  Loading section .init, size 0x48 lma ffffffff88014be0
=>  Loading section .fini, size 0x30 lma ffffffff88014c28
=>  Loading section .ctors, size 0x8 lma ffffffff88014c58
=>  Loading section .dtors, size 0x8 lma ffffffff88014c60
=>  Loading section .rdata, size 0x1ca9 lma ffffffff88014c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016920
=>  Loading section .data, size 0x418 lma ffffffff88016938
=>  Start address ffffffff88000004
=>  Transfer rate: 748040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[176/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxaio02.exe
Result: invalid   
Time: 0:00:00.260173 psxaio02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1aae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801aae0
=>  Loading section .init, size 0x48 lma ffffffff8801ab50
=>  Loading section .fini, size 0x30 lma ffffffff8801ab98
=>  Loading section .ctors, size 0x8 lma ffffffff8801abc8
=>  Loading section .dtors, size 0x8 lma ffffffff8801abd0
=>  Loading section .rdata, size 0x2510 lma ffffffff8801abe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d0f0
=>  Loading section .data, size 0x584 lma ffffffff8801d108
=>  Start address ffffffff88000004
=>  Transfer rate: 963616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[177/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxaio03.exe
Result: invalid   
Time: 0:00:00.262928 psxaio03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a7d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a7d0
=>  Loading section .init, size 0x48 lma ffffffff8801a840
=>  Loading section .fini, size 0x30 lma ffffffff8801a888
=>  Loading section .ctors, size 0x8 lma ffffffff8801a8b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801a8c0
=>  Loading section .rdata, size 0x22d4 lma ffffffff8801a8d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cba8
=>  Loading section .data, size 0x590 lma ffffffff8801cbc0
=>  Start address ffffffff88000004
=>  Transfer rate: 952864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[178/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxalarm01.exe
Result: invalid   
Time: 0:00:00.254260 psxalarm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013140
=>  Loading section .init, size 0x48 lma ffffffff880131c0
=>  Loading section .fini, size 0x30 lma ffffffff88013208
=>  Loading section .ctors, size 0x8 lma ffffffff88013238
=>  Loading section .dtors, size 0x8 lma ffffffff88013240
=>  Loading section .rdata, size 0x1d00 lma ffffffff88013250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014f50
=>  Loading section .data, size 0x464 lma ffffffff88014f68
=>  Start address ffffffff88000004
=>  Transfer rate: 695840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[179/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid   
Time: 0:00:00.642770 psxautoinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111a0
=>  Loading section .init, size 0x48 lma ffffffff88011210
=>  Loading section .fini, size 0x30 lma ffffffff88011258
=>  Loading section .ctors, size 0x8 lma ffffffff88011288
=>  Loading section .dtors, size 0x8 lma ffffffff88011290
=>  Loading section .rdata, size 0x2598 lma ffffffff880112a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013838
=>  Loading section .data, size 0x408 lma ffffffff88013850
=>  Start address ffffffff88000004
=>  Transfer rate: 647808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[180/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid   
Time: 0:00:00.614610 psxautoinit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e10
=>  Loading section .init, size 0x48 lma ffffffff88012e80
=>  Loading section .fini, size 0x30 lma ffffffff88012ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88012f00
=>  Loading section .rdata, size 0x26c0 lma ffffffff88012f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880155d0
=>  Loading section .data, size 0x418 lma ffffffff880155e8
=>  Start address ffffffff88000004
=>  Transfer rate: 708544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[181/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid   
Time: 0:00:00.619212 psxbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012830
=>  Loading section .init, size 0x48 lma ffffffff880128a0
=>  Loading section .fini, size 0x30 lma ffffffff880128e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012918
=>  Loading section .dtors, size 0x8 lma ffffffff88012920
=>  Loading section .rdata, size 0x218c lma ffffffff88012930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ac0
=>  Loading section .data, size 0x494 lma ffffffff88014ad8
=>  Start address ffffffff88000004
=>  Transfer rate: 686848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[182/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcancel.exe
Result: invalid   
Time: 0:00:00.632790 psxcancel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x150b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880150b0
=>  Loading section .init, size 0x48 lma ffffffff88015120
=>  Loading section .fini, size 0x30 lma ffffffff88015168
=>  Loading section .ctors, size 0x8 lma ffffffff88015198
=>  Loading section .dtors, size 0x8 lma ffffffff880151a0
=>  Loading section .rdata, size 0x28e0 lma ffffffff880151b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017a90
=>  Loading section .data, size 0x498 lma ffffffff88017aa8
=>  Start address ffffffff88000004
=>  Transfer rate: 784832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[183/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcancel01.exe
Result: invalid   
Time: 0:00:00.622607 psxcancel01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11dd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011dd0
=>  Loading section .init, size 0x48 lma ffffffff88011e40
=>  Loading section .fini, size 0x30 lma ffffffff88011e88
=>  Loading section .ctors, size 0x8 lma ffffffff88011eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ec0
=>  Loading section .rdata, size 0x2478 lma ffffffff88011ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014348
=>  Loading section .data, size 0x448 lma ffffffff88014360
=>  Start address ffffffff88000004
=>  Transfer rate: 670976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[184/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxchroot01.exe
Result: invalid   
Time: 0:00:00.619005 psxchroot01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe00
=>  Loading section .init, size 0x48 lma ffffffff8800fe70
=>  Loading section .fini, size 0x30 lma ffffffff8800feb8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fee8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fef0
=>  Loading section .rdata, size 0x1b71 lma ffffffff8800ff00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a78
=>  Loading section .data, size 0x440 lma ffffffff88011a90
=>  Start address ffffffff88000004
=>  Transfer rate: 587272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[185/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxclassic01.exe
Result: invalid   
Time: 0:00:00.619508 psxclassic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x138b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880138b0
=>  Loading section .init, size 0x48 lma ffffffff88013930
=>  Loading section .fini, size 0x30 lma ffffffff88013978
=>  Loading section .ctors, size 0x8 lma ffffffff880139a8
=>  Loading section .dtors, size 0x8 lma ffffffff880139b0
=>  Loading section .rdata, size 0x1e70 lma ffffffff880139c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015830
=>  Loading section .data, size 0x4a4 lma ffffffff88015848
=>  Start address ffffffff88000004
=>  Transfer rate: 714528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[186/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcleanup.exe
Result: invalid   
Time: 0:00:00.611439 psxcleanup.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014450
=>  Loading section .init, size 0x48 lma ffffffff880144c0
=>  Loading section .fini, size 0x30 lma ffffffff88014508
=>  Loading section .ctors, size 0x8 lma ffffffff88014538
=>  Loading section .dtors, size 0x8 lma ffffffff88014540
=>  Loading section .rdata, size 0x268c lma ffffffff88014550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016be0
=>  Loading section .data, size 0x468 lma ffffffff88016bf8
=>  Start address ffffffff88000004
=>  Transfer rate: 754336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[187/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid   
Time: 0:00:00.257552 psxcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011450
=>  Loading section .init, size 0x48 lma ffffffff880114c0
=>  Loading section .fini, size 0x30 lma ffffffff88011508
=>  Loading section .ctors, size 0x8 lma ffffffff88011538
=>  Loading section .dtors, size 0x8 lma ffffffff88011540
=>  Loading section .rdata, size 0x1b3d lma ffffffff88011550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013090
=>  Loading section .data, size 0x4b0 lma ffffffff880130a8
=>  Start address ffffffff88000004
=>  Transfer rate: 633448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[188/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid   
Time: 0:00:00.259747 psxcleanup02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=>  Loading section .init, size 0x48 lma ffffffff88010ae0
=>  Loading section .fini, size 0x30 lma ffffffff88010b28
=>  Loading section .ctors, size 0x8 lma ffffffff88010b58
=>  Loading section .dtors, size 0x8 lma ffffffff88010b60
=>  Loading section .rdata, size 0x1ad9 lma ffffffff88010b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012650
=>  Loading section .data, size 0x4a8 lma ffffffff88012668
=>  Start address ffffffff88000004
=>  Transfer rate: 612360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[189/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxclock.exe
Result: invalid   
Time: 0:00:00.259581 psxclock.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019920
=>  Loading section .init, size 0x48 lma ffffffff88019990
=>  Loading section .fini, size 0x30 lma ffffffff880199d8
=>  Loading section .ctors, size 0x8 lma ffffffff88019a08
=>  Loading section .dtors, size 0x8 lma ffffffff88019a10
=>  Loading section .rdata, size 0x283c lma ffffffff88019a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c260
=>  Loading section .data, size 0x620 lma ffffffff8801c278
=>  Start address ffffffff88000004
=>  Transfer rate: 935008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[190/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxclock01.exe
Result: invalid   
Time: 0:00:00.257250 psxclock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d10
=>  Loading section .init, size 0x48 lma ffffffff88010d80
=>  Loading section .fini, size 0x30 lma ffffffff88010dc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010df8
=>  Loading section .dtors, size 0x8 lma ffffffff88010e00
=>  Loading section .rdata, size 0x1a15 lma ffffffff88010e10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012828
=>  Loading section .data, size 0x418 lma ffffffff88012840
=>  Start address ffffffff88000004
=>  Transfer rate: 615016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[191/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid   
Time: 0:00:00.278859 psxclockrealtime01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016c40
=>  Loading section .init, size 0x48 lma ffffffff88016cb0
=>  Loading section .fini, size 0x30 lma ffffffff88016cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88016d28
=>  Loading section .dtors, size 0x8 lma ffffffff88016d30
=>  Loading section .rdata, size 0x26a8 lma ffffffff88016d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880193e8
=>  Loading section .data, size 0x480 lma ffffffff88019400
=>  Start address ffffffff88000004
=>  Transfer rate: 836544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[192/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid   
Time: 0:00:00.263283 psxconcurrency01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffb0
=>  Loading section .init, size 0x48 lma ffffffff88010020
=>  Loading section .fini, size 0x30 lma ffffffff88010068
=>  Loading section .ctors, size 0x8 lma ffffffff88010098
=>  Loading section .dtors, size 0x8 lma ffffffff880100a0
=>  Loading section .rdata, size 0x1af1 lma ffffffff880100b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ba8
=>  Loading section .data, size 0x408 lma ffffffff88011bc0
=>  Start address ffffffff88000004
=>  Transfer rate: 589256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[193/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxcond01.exe
Result: invalid   
Time: 0:00:00.259440 psxcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880130d0
=>  Loading section .init, size 0x48 lma ffffffff88013140
=>  Loading section .fini, size 0x30 lma ffffffff88013188
=>  Loading section .ctors, size 0x8 lma ffffffff880131b8
=>  Loading section .dtors, size 0x8 lma ffffffff880131c0
=>  Loading section .rdata, size 0x2708 lma ffffffff880131d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880158d8
=>  Loading section .data, size 0x424 lma ffffffff880158f0
=>  Start address ffffffff88000004
=>  Transfer rate: 714848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[194/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxcond02.exe
Result: invalid   
Time: 0:00:00.252605 psxcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109c0
=>  Loading section .init, size 0x48 lma ffffffff88010a30
=>  Loading section .fini, size 0x30 lma ffffffff88010a78
=>  Loading section .ctors, size 0x8 lma ffffffff88010aa8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ab0
=>  Loading section .rdata, size 0x2668 lma ffffffff88010ac0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013128
=>  Loading section .data, size 0x408 lma ffffffff88013140
=>  Start address ffffffff88000004
=>  Transfer rate: 633344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[195/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxconfig01.exe
Result: invalid   
Time: 0:00:00.257054 psxconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb0 lma ffffffff88015390
=>  Loading section .init, size 0x48 lma ffffffff88015440
=>  Loading section .fini, size 0x30 lma ffffffff88015488
=>  Loading section .ctors, size 0x8 lma ffffffff880154b8
=>  Loading section .dtors, size 0x8 lma ffffffff880154c0
=>  Loading section .rdata, size 0x2761 lma ffffffff880154d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017c38
=>  Loading section .data, size 0x700 lma ffffffff88017c50
=>  Start address ffffffff88000004
=>  Transfer rate: 793096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[196/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxconfstr.exe
Result: invalid   
Time: 0:00:00.263759 psxconfstr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x189e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880189e0
=>  Loading section .init, size 0x48 lma ffffffff88018a60
=>  Loading section .fini, size 0x30 lma ffffffff88018aa8
=>  Loading section .ctors, size 0x8 lma ffffffff88018ad8
=>  Loading section .dtors, size 0x8 lma ffffffff88018ae0
=>  Loading section .rdata, size 0x2404 lma ffffffff88018af0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aef8
=>  Loading section .data, size 0x448 lma ffffffff8801af10
=>  Start address ffffffff88000004
=>  Transfer rate: 891488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[197/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid   
Time: 0:00:00.266420 psxdevctl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x137f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880137f0
=>  Loading section .init, size 0x48 lma ffffffff88013860
=>  Loading section .fini, size 0x30 lma ffffffff880138a8
=>  Loading section .ctors, size 0x8 lma ffffffff880138d8
=>  Loading section .dtors, size 0x8 lma ffffffff880138e0
=>  Loading section .rdata, size 0x1dc0 lma ffffffff880138f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880156b0
=>  Loading section .data, size 0x408 lma ffffffff880156c8
=>  Start address ffffffff88000004
=>  Transfer rate: 710208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[198/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid   
Time: 0:00:00.257328 psxeintr_join.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012180
=>  Loading section .init, size 0x48 lma ffffffff880121f0
=>  Loading section .fini, size 0x30 lma ffffffff88012238
=>  Loading section .ctors, size 0x8 lma ffffffff88012268
=>  Loading section .dtors, size 0x8 lma ffffffff88012270
=>  Loading section .rdata, size 0x1c8d lma ffffffff88012280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f10
=>  Loading section .data, size 0x418 lma ffffffff88013f28
=>  Start address ffffffff88000004
=>  Transfer rate: 661928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[199/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxenosys.exe
Result: invalid   
Time: 0:00:00.260688 psxenosys.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11cc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011cc0
=>  Loading section .init, size 0x48 lma ffffffff88011d30
=>  Loading section .fini, size 0x30 lma ffffffff88011d78
=>  Loading section .ctors, size 0x8 lma ffffffff88011da8
=>  Loading section .dtors, size 0x8 lma ffffffff88011db0
=>  Loading section .rdata, size 0x26b0 lma ffffffff88011dc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014470
=>  Loading section .data, size 0x41c lma ffffffff88014488
=>  Start address ffffffff88000004
=>  Transfer rate: 672992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[200/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfatal01.exe
Result: invalid   
Time: 0:00:00.260793 psxfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110d0
=>  Loading section .init, size 0x48 lma ffffffff88011140
=>  Loading section .fini, size 0x30 lma ffffffff88011188
=>  Loading section .ctors, size 0x8 lma ffffffff880111b8
=>  Loading section .dtors, size 0x8 lma ffffffff880111c0
=>  Loading section .rdata, size 0x2778 lma ffffffff880111d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013948
=>  Loading section .data, size 0x418 lma ffffffff88013960
=>  Start address ffffffff88000004
=>  Transfer rate: 650112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[201/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfatal02.exe
Result: invalid   
Time: 0:00:00.261108 psxfatal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11020 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011020
=>  Loading section .init, size 0x48 lma ffffffff88011090
=>  Loading section .fini, size 0x30 lma ffffffff880110d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011108
=>  Loading section .dtors, size 0x8 lma ffffffff88011110
=>  Loading section .rdata, size 0x278c lma ffffffff88011120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138b0
=>  Loading section .data, size 0x418 lma ffffffff880138c8
=>  Start address ffffffff88000004
=>  Transfer rate: 648864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[202/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfchx01.exe
Result: invalid   
Time: 0:00:00.254780 psxfchx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112f0
=>  Loading section .init, size 0x48 lma ffffffff88011360
=>  Loading section .fini, size 0x30 lma ffffffff880113a8
=>  Loading section .ctors, size 0x8 lma ffffffff880113d8
=>  Loading section .dtors, size 0x8 lma ffffffff880113e0
=>  Loading section .rdata, size 0x1f9d lma ffffffff880113f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013390
=>  Loading section .data, size 0x418 lma ffffffff880133a8
=>  Start address ffffffff88000004
=>  Transfer rate: 638376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[203/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxfenv01.exe
Result: invalid   
Time: 0:00:00.261488 psxfenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e10
=>  Loading section .init, size 0x48 lma ffffffff88012e80
=>  Loading section .fini, size 0x30 lma ffffffff88012ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88012f00
=>  Loading section .rdata, size 0x1cb4 lma ffffffff88012f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014bc8
=>  Loading section .data, size 0x408 lma ffffffff88014be0
=>  Start address ffffffff88000004
=>  Transfer rate: 687840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[204/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxfile01.exe
Result: invalid   
Time: 0:00:00.264275 psxfile01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x240a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880240a0
=>  Loading section .init, size 0x48 lma ffffffff88024110
=>  Loading section .fini, size 0x30 lma ffffffff88024158
=>  Loading section .ctors, size 0x8 lma ffffffff88024188
=>  Loading section .dtors, size 0x8 lma ffffffff88024190
=>  Loading section .rdata, size 0x4488 lma ffffffff880241a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028628
=>  Loading section .data, size 0x620 lma ffffffff88028640
=>  Start address ffffffff88000004
=>  Transfer rate: 1336000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[205/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxfile02.exe
Result: invalid   
Time: 0:00:00.261387 psxfile02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c10
=>  Loading section .init, size 0x48 lma ffffffff88011c80
=>  Loading section .fini, size 0x30 lma ffffffff88011cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88011cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88011d00
=>  Loading section .rdata, size 0x24bc lma ffffffff88011d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141d0
=>  Loading section .data, size 0x418 lma ffffffff880141e8
=>  Start address ffffffff88000004
=>  Transfer rate: 667552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[206/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid   
Time: 0:00:00.262513 psxfilelock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012100
=>  Loading section .init, size 0x48 lma ffffffff88012170
=>  Loading section .fini, size 0x30 lma ffffffff880121b8
=>  Loading section .ctors, size 0x8 lma ffffffff880121e8
=>  Loading section .dtors, size 0x8 lma ffffffff880121f0
=>  Loading section .rdata, size 0x1a51 lma ffffffff88012200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c58
=>  Loading section .data, size 0x424 lma ffffffff88013c70
=>  Start address ffffffff88000004
=>  Transfer rate: 656424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[207/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxftw01.exe
Result: invalid   
Time: 0:00:00.258922 psxftw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801b870
=>  Loading section .init, size 0x48 lma ffffffff8801b8f0
=>  Loading section .fini, size 0x30 lma ffffffff8801b938
=>  Loading section .ctors, size 0x8 lma ffffffff8801b968
=>  Loading section .dtors, size 0x8 lma ffffffff8801b970
=>  Loading section .rdata, size 0x42fc lma ffffffff8801b980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801fc80
=>  Loading section .data, size 0x4b8 lma ffffffff8801fc98
=>  Start address ffffffff88000004
=>  Transfer rate: 1051168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[208/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid   
Time: 0:00:00.257862 psxgetattrnp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12120 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012120
=>  Loading section .init, size 0x48 lma ffffffff88012190
=>  Loading section .fini, size 0x30 lma ffffffff880121d8
=>  Loading section .ctors, size 0x8 lma ffffffff88012208
=>  Loading section .dtors, size 0x8 lma ffffffff88012210
=>  Loading section .rdata, size 0x1f6d lma ffffffff88012220
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014190
=>  Loading section .data, size 0x414 lma ffffffff880141a8
=>  Start address ffffffff88000004
=>  Transfer rate: 667016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[209/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid   
Time: 0:00:00.257533 psxgetrusage01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1b91 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120a8
=>  Loading section .data, size 0x418 lma ffffffff880120c0
=>  Start address ffffffff88000004
=>  Transfer rate: 599624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[210/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:202 W:0   | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid   
Time: 0:00:00.281511 psxglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff00
=>  Loading section .init, size 0x48 lma ffffffff8800ff70
=>  Loading section .fini, size 0x30 lma ffffffff8800ffb8
=>  Loading section .ctors, size 0xc lma ffffffff8800ffe8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fff4
=>  Loading section .rdata, size 0x1a45 lma ffffffff88010000
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a48
=>  Loading section .data, size 0x408 lma ffffffff88011a60
=>  Start address ffffffff88000004
=>  Transfer rate: 586504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[211/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid   
Time: 0:00:00.263515 psxglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=>  Loading section .init, size 0x48 lma ffffffff88010470
=>  Loading section .fini, size 0x30 lma ffffffff880104b8
=>  Loading section .ctors, size 0xc lma ffffffff880104e8
=>  Loading section .dtors, size 0x8 lma ffffffff880104f4
=>  Loading section .rdata, size 0x1a6d lma ffffffff88010500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f70
=>  Loading section .data, size 0x478 lma ffffffff88011f88
=>  Start address ffffffff88000004
=>  Transfer rate: 597960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[212/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psxid01.exe
Result: invalid   
Time: 0:00:00.255355 psxid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013840
=>  Loading section .init, size 0x48 lma ffffffff880138b0
=>  Loading section .fini, size 0x30 lma ffffffff880138f8
=>  Loading section .ctors, size 0x8 lma ffffffff88013928
=>  Loading section .dtors, size 0x8 lma ffffffff88013930
=>  Loading section .rdata, size 0x1d50 lma ffffffff88013940
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015690
=>  Loading section .data, size 0x44c lma ffffffff880156a8
=>  Start address ffffffff88000004
=>  Transfer rate: 710496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[213/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psximfs01.exe
Result: invalid   
Time: 0:00:00.260160 psximfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111c0
=>  Loading section .init, size 0x48 lma ffffffff88011230
=>  Loading section .fini, size 0x30 lma ffffffff88011278
=>  Loading section .ctors, size 0x8 lma ffffffff880112a8
=>  Loading section .dtors, size 0x8 lma ffffffff880112b0
=>  Loading section .rdata, size 0x2520 lma ffffffff880112c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137e0
=>  Loading section .data, size 0x418 lma ffffffff880137f8
=>  Start address ffffffff88000004
=>  Transfer rate: 647232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[214/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psximfs02.exe
Result: invalid   
Time: 0:00:00.256335 psximfs02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019430
=>  Loading section .init, size 0x48 lma ffffffff880194a0
=>  Loading section .fini, size 0x30 lma ffffffff880194e8
=>  Loading section .ctors, size 0x8 lma ffffffff88019518
=>  Loading section .dtors, size 0x8 lma ffffffff88019520
=>  Loading section .rdata, size 0x2898 lma ffffffff88019530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bdc8
=>  Loading section .data, size 0x5ac lma ffffffff8801bde0
=>  Start address ffffffff88000004
=>  Transfer rate: 924704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[215/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid   
Time: 0:00:00.260228 psxinttypes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880144e0
=>  Loading section .init, size 0x48 lma ffffffff88014550
=>  Loading section .fini, size 0x30 lma ffffffff88014598
=>  Loading section .ctors, size 0x8 lma ffffffff880145c8
=>  Loading section .dtors, size 0x8 lma ffffffff880145d0
=>  Loading section .rdata, size 0x2134 lma ffffffff880145e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016718
=>  Loading section .data, size 0x570 lma ffffffff88016730
=>  Start address ffffffff88000004
=>  Transfer rate: 746656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[216/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psxitimer.exe
Result: invalid   
Time: 0:00:00.262011 psxitimer.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f60
=>  Loading section .init, size 0x48 lma ffffffff88010fd0
=>  Loading section .fini, size 0x30 lma ffffffff88011018
=>  Loading section .ctors, size 0x8 lma ffffffff88011048
=>  Loading section .dtors, size 0x8 lma ffffffff88011050
=>  Loading section .rdata, size 0x1c15 lma ffffffff88011060
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c78
=>  Loading section .data, size 0x418 lma ffffffff88012c90
=>  Start address ffffffff88000004
=>  Transfer rate: 623848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[217/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psxkey01.exe
Result: invalid   
Time: 0:00:00.257963 psxkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf900 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f900
=>  Loading section .init, size 0x48 lma ffffffff8800f970
=>  Loading section .fini, size 0x30 lma ffffffff8800f9b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f9e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f9f0
=>  Loading section .rdata, size 0x1cfd lma ffffffff8800fa00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011700
=>  Loading section .data, size 0x470 lma ffffffff88011718
=>  Start address ffffffff88000004
=>  Transfer rate: 580584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[218/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:210 W:0   | mipstx39/jmr3904: psxkey02.exe
Result: invalid   
Time: 0:00:00.256787 psxkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10500 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010500
=>  Loading section .init, size 0x48 lma ffffffff88010570
=>  Loading section .fini, size 0x30 lma ffffffff880105b8
=>  Loading section .ctors, size 0x8 lma ffffffff880105e8
=>  Loading section .dtors, size 0x8 lma ffffffff880105f0
=>  Loading section .rdata, size 0x1b15 lma ffffffff88010600
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012118
=>  Loading section .data, size 0x470 lma ffffffff88012130
=>  Start address ffffffff88000004
=>  Transfer rate: 601256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[219/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey03.exe
Result: invalid   
Time: 0:00:01.033271 psxkey03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011530
=>  Loading section .init, size 0x48 lma ffffffff880115a0
=>  Loading section .fini, size 0x30 lma ffffffff880115e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011618
=>  Loading section .dtors, size 0x8 lma ffffffff88011620
=>  Loading section .rdata, size 0x1b9d lma ffffffff88011630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131d0
=>  Loading section .data, size 0x490 lma ffffffff880131e8
=>  Start address ffffffff88000004
=>  Transfer rate: 635752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[220/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey04.exe
Result: invalid   
Time: 0:00:00.992388 psxkey04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115f0
=>  Loading section .init, size 0x48 lma ffffffff88011660
=>  Loading section .fini, size 0x30 lma ffffffff880116a8
=>  Loading section .ctors, size 0x8 lma ffffffff880116d8
=>  Loading section .dtors, size 0x8 lma ffffffff880116e0
=>  Loading section .rdata, size 0x1b9d lma ffffffff880116f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013290
=>  Loading section .data, size 0x498 lma ffffffff880132a8
=>  Start address ffffffff88000004
=>  Transfer rate: 637352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[221/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey05.exe
Result: invalid   
Time: 0:00:00.984704 psxkey05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfdc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fdc0
=>  Loading section .init, size 0x48 lma ffffffff8800fe30
=>  Loading section .fini, size 0x30 lma ffffffff8800fe78
=>  Loading section .ctors, size 0x8 lma ffffffff8800fea8
=>  Loading section .dtors, size 0x8 lma ffffffff8800feb0
=>  Loading section .rdata, size 0x1b21 lma ffffffff8800fec0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119e8
=>  Loading section .data, size 0x470 lma ffffffff88011a00
=>  Start address ffffffff88000004
=>  Transfer rate: 586504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[222/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey06.exe
Result: invalid   
Time: 0:00:00.976234 psxkey06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880121e0
=>  Loading section .init, size 0x48 lma ffffffff88012250
=>  Loading section .fini, size 0x30 lma ffffffff88012298
=>  Loading section .ctors, size 0x8 lma ffffffff880122c8
=>  Loading section .dtors, size 0x8 lma ffffffff880122d0
=>  Loading section .rdata, size 0x1e4d lma ffffffff880122e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014130
=>  Loading section .data, size 0x4a0 lma ffffffff88014148
=>  Start address ffffffff88000004
=>  Transfer rate: 667368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[223/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey07.exe
Result: invalid   
Time: 0:00:00.998315 psxkey07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x132c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880132c0
=>  Loading section .init, size 0x48 lma ffffffff88013330
=>  Loading section .fini, size 0x30 lma ffffffff88013378
=>  Loading section .ctors, size 0x8 lma ffffffff880133a8
=>  Loading section .dtors, size 0x8 lma ffffffff880133b0
=>  Loading section .rdata, size 0x1d24 lma ffffffff880133c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150e8
=>  Loading section .data, size 0x490 lma ffffffff88015100
=>  Start address ffffffff88000004
=>  Transfer rate: 699424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[224/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey08.exe
Result: invalid   
Time: 0:00:00.973442 psxkey08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b50
=>  Loading section .init, size 0x48 lma ffffffff88011bc0
=>  Loading section .fini, size 0x30 lma ffffffff88011c08
=>  Loading section .ctors, size 0x8 lma ffffffff88011c38
=>  Loading section .dtors, size 0x8 lma ffffffff88011c40
=>  Loading section .rdata, size 0x1ccd lma ffffffff88011c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013920
=>  Loading section .data, size 0x4a0 lma ffffffff88013938
=>  Start address ffffffff88000004
=>  Transfer rate: 650856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[225/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey09.exe
Result: invalid   
Time: 0:00:00.978603 psxkey09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011420
=>  Loading section .init, size 0x48 lma ffffffff88011490
=>  Loading section .fini, size 0x30 lma ffffffff880114d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011508
=>  Loading section .dtors, size 0x8 lma ffffffff88011510
=>  Loading section .rdata, size 0x1b45 lma ffffffff88011520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013068
=>  Loading section .data, size 0x490 lma ffffffff88013080
=>  Start address ffffffff88000004
=>  Transfer rate: 632872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[226/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:218 W:0   | mipstx39/jmr3904: psxkey10.exe
Result: invalid   
Time: 0:00:00.984718 psxkey10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011410
=>  Loading section .init, size 0x48 lma ffffffff88011480
=>  Loading section .fini, size 0x30 lma ffffffff880114c8
=>  Loading section .ctors, size 0x8 lma ffffffff880114f8
=>  Loading section .dtors, size 0x8 lma ffffffff88011500
=>  Loading section .rdata, size 0x1b55 lma ffffffff88011510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013068
=>  Loading section .data, size 0x490 lma ffffffff88013080
=>  Start address ffffffff88000004
=>  Transfer rate: 632872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[227/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmmap01.exe
Result: invalid   
Time: 0:00:00.274248 psxmmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ab20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801ab20
=>  Loading section .init, size 0x48 lma ffffffff8801aba0
=>  Loading section .fini, size 0x30 lma ffffffff8801abe8
=>  Loading section .ctors, size 0x8 lma ffffffff8801ac18
=>  Loading section .dtors, size 0x8 lma ffffffff8801ac20
=>  Loading section .rdata, size 0x25f0 lma ffffffff8801ac30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d220
=>  Loading section .data, size 0x5f8 lma ffffffff8801d238
=>  Start address ffffffff88000004
=>  Transfer rate: 966976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[228/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmount.exe
Result: invalid   
Time: 0:00:00.257305 psxmount.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012930
=>  Loading section .init, size 0x48 lma ffffffff880129a0
=>  Loading section .fini, size 0x30 lma ffffffff880129e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012a18
=>  Loading section .dtors, size 0x8 lma ffffffff88012a20
=>  Loading section .rdata, size 0x2cc8 lma ffffffff88012a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880156f8
=>  Loading section .data, size 0x4e4 lma ffffffff88015710
=>  Start address ffffffff88000004
=>  Transfer rate: 712544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[229/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid   
Time: 0:00:00.256871 psxmsgq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88026bc0
=>  Loading section .init, size 0x48 lma ffffffff88026c40
=>  Loading section .fini, size 0x30 lma ffffffff88026c88
=>  Loading section .ctors, size 0x8 lma ffffffff88026cb8
=>  Loading section .dtors, size 0x8 lma ffffffff88026cc0
=>  Loading section .rdata, size 0x4784 lma ffffffff88026cd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b458
=>  Loading section .data, size 0x868 lma ffffffff8802b470
=>  Start address ffffffff88000004
=>  Transfer rate: 1435232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[230/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid   
Time: 0:00:00.265266 psxmsgq02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x172e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880172e0
=>  Loading section .init, size 0x48 lma ffffffff88017350
=>  Loading section .fini, size 0x30 lma ffffffff88017398
=>  Loading section .ctors, size 0x8 lma ffffffff880173c8
=>  Loading section .dtors, size 0x8 lma ffffffff880173d0
=>  Loading section .rdata, size 0x2b70 lma ffffffff880173e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019f50
=>  Loading section .data, size 0x640 lma ffffffff88019f68
=>  Start address ffffffff88000004
=>  Transfer rate: 863488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[231/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid   
Time: 0:00:00.261024 psxmsgq03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013fb0
=>  Loading section .init, size 0x48 lma ffffffff88014030
=>  Loading section .fini, size 0x30 lma ffffffff88014078
=>  Loading section .ctors, size 0x8 lma ffffffff880140a8
=>  Loading section .dtors, size 0x8 lma ffffffff880140b0
=>  Loading section .rdata, size 0x292c lma ffffffff880140c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169f0
=>  Loading section .data, size 0x490 lma ffffffff88016a08
=>  Start address ffffffff88000004
=>  Transfer rate: 750688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[232/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid   
Time: 0:00:00.262668 psxmsgq04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13120 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013120
=>  Loading section .init, size 0x48 lma ffffffff88013190
=>  Loading section .fini, size 0x30 lma ffffffff880131d8
=>  Loading section .ctors, size 0x8 lma ffffffff88013208
=>  Loading section .dtors, size 0x8 lma ffffffff88013210
=>  Loading section .rdata, size 0x2598 lma ffffffff88013220
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157b8
=>  Loading section .data, size 0x454 lma ffffffff880157d0
=>  Start address ffffffff88000004
=>  Transfer rate: 712928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[233/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid   
Time: 0:00:00.259842 psxmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010270
=>  Loading section .init, size 0x48 lma ffffffff880102e0
=>  Loading section .fini, size 0x30 lma ffffffff88010328
=>  Loading section .ctors, size 0x8 lma ffffffff88010358
=>  Loading section .dtors, size 0x8 lma ffffffff88010360
=>  Loading section .rdata, size 0x1d09 lma ffffffff88010370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012080
=>  Loading section .data, size 0x440 lma ffffffff88012098
=>  Start address ffffffff88000004
=>  Transfer rate: 599624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[234/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:226 W:0   | mipstx39/jmr3904: psxndbm01.exe
Result: invalid   
Time: 0:00:00.272139 psxndbm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x191b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880191b0
=>  Loading section .init, size 0x48 lma ffffffff88019220
=>  Loading section .fini, size 0x30 lma ffffffff88019268
=>  Loading section .ctors, size 0x8 lma ffffffff88019298
=>  Loading section .dtors, size 0x8 lma ffffffff880192a0
=>  Loading section .rdata, size 0x2488 lma ffffffff880192b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b738
=>  Loading section .data, size 0x418 lma ffffffff8801b750
=>  Start address ffffffff88000004
=>  Transfer rate: 908032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[235/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxobj01.exe
Result: invalid   
Time: 0:00:00.270143 psxobj01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fab0
=>  Loading section .init, size 0x48 lma ffffffff8800fb20
=>  Loading section .fini, size 0x30 lma ffffffff8800fb68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fba0
=>  Loading section .rdata, size 0x1b69 lma ffffffff8800fbb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011720
=>  Loading section .data, size 0x438 lma ffffffff88011738
=>  Start address ffffffff88000004
=>  Transfer rate: 580360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[236/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxonce01.exe
Result: invalid   
Time: 0:00:00.269852 psxonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100a0
=>  Loading section .init, size 0x48 lma ffffffff88010110
=>  Loading section .fini, size 0x30 lma ffffffff88010158
=>  Loading section .ctors, size 0x8 lma ffffffff88010188
=>  Loading section .dtors, size 0x8 lma ffffffff88010190
=>  Loading section .rdata, size 0x1ba9 lma ffffffff880101a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d50
=>  Loading section .data, size 0x430 lma ffffffff88011d68
=>  Start address ffffffff88000004
=>  Transfer rate: 592968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[237/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid   
Time: 0:00:00.264933 psxpasswd01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013fa0
=>  Loading section .init, size 0x48 lma ffffffff88014010
=>  Loading section .fini, size 0x30 lma ffffffff88014058
=>  Loading section .ctors, size 0x8 lma ffffffff88014088
=>  Loading section .dtors, size 0x8 lma ffffffff88014090
=>  Loading section .rdata, size 0x1fac lma ffffffff880140a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016050
=>  Loading section .data, size 0x4b4 lma ffffffff88016068
=>  Start address ffffffff88000004
=>  Transfer rate: 731264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[238/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid   
Time: 0:00:00.257621 psxpasswd02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e070
=>  Loading section .init, size 0x48 lma ffffffff8801e0e0
=>  Loading section .fini, size 0x30 lma ffffffff8801e128
=>  Loading section .ctors, size 0x8 lma ffffffff8801e158
=>  Loading section .dtors, size 0x8 lma ffffffff8801e160
=>  Loading section .rdata, size 0x2788 lma ffffffff8801e170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880208f8
=>  Loading section .data, size 0x620 lma ffffffff88020910
=>  Start address ffffffff88000004
=>  Transfer rate: 1079616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[239/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxpipe01.exe
Result: invalid   
Time: 0:00:00.263611 psxpipe01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x189d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880189d0
=>  Loading section .init, size 0x48 lma ffffffff88018a40
=>  Loading section .fini, size 0x30 lma ffffffff88018a88
=>  Loading section .ctors, size 0x8 lma ffffffff88018ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88018ac0
=>  Loading section .rdata, size 0x2348 lma ffffffff88018ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ae18
=>  Loading section .data, size 0x5ac lma ffffffff8801ae30
=>  Start address ffffffff88000004
=>  Transfer rate: 892576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[240/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid   
Time: 0:00:00.266496 psxrdwrv.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013850
=>  Loading section .init, size 0x48 lma ffffffff880138c0
=>  Loading section .fini, size 0x30 lma ffffffff88013908
=>  Loading section .ctors, size 0x8 lma ffffffff88013938
=>  Loading section .dtors, size 0x8 lma ffffffff88013940
=>  Loading section .rdata, size 0x2888 lma ffffffff88013950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880161d8
=>  Loading section .data, size 0x424 lma ffffffff880161f0
=>  Start address ffffffff88000004
=>  Transfer rate: 733280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[241/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxreaddir.exe
Result: invalid   
Time: 0:00:00.262514 psxreaddir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12590 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012590
=>  Loading section .init, size 0x48 lma ffffffff88012600
=>  Loading section .fini, size 0x30 lma ffffffff88012648
=>  Loading section .ctors, size 0x8 lma ffffffff88012678
=>  Loading section .dtors, size 0x8 lma ffffffff88012680
=>  Loading section .rdata, size 0x257d lma ffffffff88012690
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c10
=>  Loading section .data, size 0x4e8 lma ffffffff88014c28
=>  Start address ffffffff88000004
=>  Transfer rate: 690216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[242/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:234 W:0   | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid   
Time: 0:00:00.255847 psxrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14d60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014d60
=>  Loading section .init, size 0x48 lma ffffffff88014dd0
=>  Loading section .fini, size 0x30 lma ffffffff88014e18
=>  Loading section .ctors, size 0x8 lma ffffffff88014e48
=>  Loading section .dtors, size 0x8 lma ffffffff88014e50
=>  Loading section .rdata, size 0x3040 lma ffffffff88014e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017ea0
=>  Loading section .data, size 0x494 lma ffffffff88017eb8
=>  Start address ffffffff88000004
=>  Transfer rate: 793120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[243/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxsem01.exe
Result: invalid   
Time: 0:00:00.264701 psxsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1cad0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801cad0
=>  Loading section .init, size 0x48 lma ffffffff8801cb40
=>  Loading section .fini, size 0x30 lma ffffffff8801cb88
=>  Loading section .ctors, size 0x8 lma ffffffff8801cbb8
=>  Loading section .dtors, size 0x8 lma ffffffff8801cbc0
=>  Loading section .rdata, size 0x3570 lma ffffffff8801cbd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020140
=>  Loading section .data, size 0x5b4 lma ffffffff88020158
=>  Start address ffffffff88000004
=>  Transfer rate: 1062944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[244/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxshm01.exe
Result: invalid   
Time: 0:00:00.257181 psxshm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012960
=>  Loading section .init, size 0x48 lma ffffffff880129d0
=>  Loading section .fini, size 0x30 lma ffffffff88012a18
=>  Loading section .ctors, size 0x8 lma ffffffff88012a48
=>  Loading section .dtors, size 0x8 lma ffffffff88012a50
=>  Loading section .rdata, size 0x248c lma ffffffff88012a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ef0
=>  Loading section .data, size 0x450 lma ffffffff88014f08
=>  Start address ffffffff88000004
=>  Transfer rate: 694880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[245/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxshm02.exe
Result: invalid   
Time: 0:00:00.263120 psxshm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012c40
=>  Loading section .init, size 0x48 lma ffffffff88012cb0
=>  Loading section .fini, size 0x30 lma ffffffff88012cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88012d28
=>  Loading section .dtors, size 0x8 lma ffffffff88012d30
=>  Loading section .rdata, size 0x248c lma ffffffff88012d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880151d0
=>  Loading section .data, size 0x450 lma ffffffff880151e8
=>  Start address ffffffff88000004
=>  Transfer rate: 700768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[246/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxsignal01.exe
Result: invalid   
Time: 0:00:00.272133 psxsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x189f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880189f0
=>  Loading section .init, size 0x48 lma ffffffff88018a70
=>  Loading section .fini, size 0x30 lma ffffffff88018ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88018ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88018af0
=>  Loading section .rdata, size 0x2510 lma ffffffff88018b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b010
=>  Loading section .data, size 0x654 lma ffffffff8801b028
=>  Start address ffffffff88000004
=>  Transfer rate: 897952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[247/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxsignal02.exe
Result: invalid   
Time: 0:00:00.263286 psxsignal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x131b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880131b0
=>  Loading section .init, size 0x48 lma ffffffff88013220
=>  Loading section .fini, size 0x30 lma ffffffff88013268
=>  Loading section .ctors, size 0x8 lma ffffffff88013298
=>  Loading section .dtors, size 0x8 lma ffffffff880132a0
=>  Loading section .rdata, size 0x1cfd lma ffffffff880132b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fb0
=>  Loading section .data, size 0x4a8 lma ffffffff88014fc8
=>  Start address ffffffff88000004
=>  Transfer rate: 697128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[248/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxsignal03.exe
Result: invalid   
Time: 0:00:00.257700 psxsignal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013100
=>  Loading section .init, size 0x48 lma ffffffff88013170
=>  Loading section .fini, size 0x30 lma ffffffff880131b8
=>  Loading section .ctors, size 0x8 lma ffffffff880131e8
=>  Loading section .dtors, size 0x8 lma ffffffff880131f0
=>  Loading section .rdata, size 0x1e7d lma ffffffff88013200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015080
=>  Loading section .data, size 0x430 lma ffffffff88015098
=>  Start address ffffffff88000004
=>  Transfer rate: 697832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[249/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxsignal04.exe
Result: invalid   
Time: 0:00:00.310983 psxsignal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013100
=>  Loading section .init, size 0x48 lma ffffffff88013170
=>  Loading section .fini, size 0x30 lma ffffffff880131b8
=>  Loading section .ctors, size 0x8 lma ffffffff880131e8
=>  Loading section .dtors, size 0x8 lma ffffffff880131f0
=>  Loading section .rdata, size 0x1e95 lma ffffffff88013200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015098
=>  Loading section .data, size 0x430 lma ffffffff880150b0
=>  Start address ffffffff88000004
=>  Transfer rate: 698024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[250/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:242 W:0   | mipstx39/jmr3904: psxsignal05.exe
Result: invalid   
Time: 0:00:00.256891 psxsignal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011220
=>  Loading section .init, size 0x48 lma ffffffff88011290
=>  Loading section .fini, size 0x30 lma ffffffff880112d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011308
=>  Loading section .dtors, size 0x8 lma ffffffff88011310
=>  Loading section .rdata, size 0x1c51 lma ffffffff88011320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f78
=>  Loading section .data, size 0x418 lma ffffffff88012f90
=>  Start address ffffffff88000004
=>  Transfer rate: 629960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[251/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxsignal06.exe
Result: invalid   
Time: 0:00:00.256403 psxsignal06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013270
=>  Loading section .init, size 0x48 lma ffffffff880132e0
=>  Loading section .fini, size 0x30 lma ffffffff88013328
=>  Loading section .ctors, size 0x8 lma ffffffff88013358
=>  Loading section .dtors, size 0x8 lma ffffffff88013360
=>  Loading section .rdata, size 0x1d28 lma ffffffff88013370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015098
=>  Loading section .data, size 0x424 lma ffffffff880150b0
=>  Start address ffffffff88000004
=>  Transfer rate: 697952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[252/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxsignal07.exe
Result: invalid   
Time: 0:00:00.266850 psxsignal07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88015e30
=>  Loading section .init, size 0x48 lma ffffffff88015eb0
=>  Loading section .fini, size 0x30 lma ffffffff88015ef8
=>  Loading section .ctors, size 0x8 lma ffffffff88015f28
=>  Loading section .dtors, size 0x8 lma ffffffff88015f30
=>  Loading section .rdata, size 0x1e80 lma ffffffff88015f40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017dc0
=>  Loading section .data, size 0x49c lma ffffffff88017dd8
=>  Start address ffffffff88000004
=>  Transfer rate: 791392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[253/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxsignal08.exe
Result: invalid   
Time: 0:00:00.262180 psxsignal08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015600
=>  Loading section .init, size 0x48 lma ffffffff88015670
=>  Loading section .fini, size 0x30 lma ffffffff880156b8
=>  Loading section .ctors, size 0x8 lma ffffffff880156e8
=>  Loading section .dtors, size 0x8 lma ffffffff880156f0
=>  Loading section .rdata, size 0x21f8 lma ffffffff88015700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880178f8
=>  Loading section .data, size 0x424 lma ffffffff88017910
=>  Start address ffffffff88000004
=>  Transfer rate: 780640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[254/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxspin01.exe
Result: invalid   
Time: 0:00:00.264915 psxspin01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010620
=>  Loading section .init, size 0x48 lma ffffffff88010690
=>  Loading section .fini, size 0x30 lma ffffffff880106d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010708
=>  Loading section .dtors, size 0x8 lma ffffffff88010710
=>  Loading section .rdata, size 0x1c29 lma ffffffff88010720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012350
=>  Loading section .data, size 0x418 lma ffffffff88012368
=>  Start address ffffffff88000004
=>  Transfer rate: 605064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[255/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxstack01.exe
Result: invalid   
Time: 0:00:00.259382 psxstack01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011770
=>  Loading section .init, size 0x48 lma ffffffff880117e0
=>  Loading section .fini, size 0x30 lma ffffffff88011828
=>  Loading section .ctors, size 0x8 lma ffffffff88011858
=>  Loading section .dtors, size 0x8 lma ffffffff88011860
=>  Loading section .rdata, size 0x1b61 lma ffffffff88011870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133d8
=>  Loading section .data, size 0x428 lma ffffffff880133f0
=>  Start address ffffffff88000004
=>  Transfer rate: 639048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[256/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxstack02.exe
Result: invalid   
Time: 0:00:00.261789 psxstack02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011750
=>  Loading section .init, size 0x48 lma ffffffff880117c0
=>  Loading section .fini, size 0x30 lma ffffffff88011808
=>  Loading section .ctors, size 0x8 lma ffffffff88011838
=>  Loading section .dtors, size 0x8 lma ffffffff88011840
=>  Loading section .rdata, size 0x1b61 lma ffffffff88011850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133b8
=>  Loading section .data, size 0x428 lma ffffffff880133d0
=>  Start address ffffffff88000004
=>  Transfer rate: 638792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[257/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxstat.exe
Result: invalid   
Time: 0:00:00.251670 psxstat.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020b40
=>  Loading section .init, size 0x48 lma ffffffff88020bb0
=>  Loading section .fini, size 0x30 lma ffffffff88020bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88020c28
=>  Loading section .dtors, size 0x8 lma ffffffff88020c30
=>  Loading section .rdata, size 0x41dc lma ffffffff88020c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024e20
=>  Loading section .data, size 0x778 lma ffffffff88024e38
=>  Start address ffffffff88000004
=>  Transfer rate: 1223968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[258/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:250 W:0   | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid   
Time: 0:00:00.253009 psxstrsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012b30
=>  Loading section .init, size 0x48 lma ffffffff88012ba0
=>  Loading section .fini, size 0x30 lma ffffffff88012be8
=>  Loading section .ctors, size 0x8 lma ffffffff88012c18
=>  Loading section .dtors, size 0x8 lma ffffffff88012c20
=>  Loading section .rdata, size 0x20b0 lma ffffffff88012c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ce0
=>  Loading section .data, size 0x674 lma ffffffff88014cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 695072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[259/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxsysconf.exe
Result: invalid   
Time: 0:00:00.269224 psxsysconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112a0
=>  Loading section .init, size 0x48 lma ffffffff88011310
=>  Loading section .fini, size 0x30 lma ffffffff88011358
=>  Loading section .ctors, size 0x8 lma ffffffff88011388
=>  Loading section .dtors, size 0x8 lma ffffffff88011390
=>  Loading section .rdata, size 0x25f4 lma ffffffff880113a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013998
=>  Loading section .data, size 0x418 lma ffffffff880139b0
=>  Start address ffffffff88000004
=>  Transfer rate: 650720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[260/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid   
Time: 0:00:00.262357 psxthreadname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=>  Loading section .init, size 0x48 lma ffffffff88010470
=>  Loading section .fini, size 0x30 lma ffffffff880104b8
=>  Loading section .ctors, size 0x8 lma ffffffff880104e8
=>  Loading section .dtors, size 0x8 lma ffffffff880104f0
=>  Loading section .rdata, size 0x1ae5 lma ffffffff88010500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fe8
=>  Loading section .data, size 0x418 lma ffffffff88012000
=>  Start address ffffffff88000004
=>  Transfer rate: 598120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[261/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxtime.exe
Result: invalid   
Time: 0:00:00.256011 psxtime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018060
=>  Loading section .init, size 0x48 lma ffffffff880180d0
=>  Loading section .fini, size 0x30 lma ffffffff88018118
=>  Loading section .ctors, size 0x8 lma ffffffff88018148
=>  Loading section .dtors, size 0x8 lma ffffffff88018150
=>  Loading section .rdata, size 0x2540 lma ffffffff88018160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a6a0
=>  Loading section .data, size 0x6f8 lma ffffffff8801a6b8
=>  Start address ffffffff88000004
=>  Transfer rate: 879936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[262/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxtimer01.exe
Result: invalid   
Time: 0:00:00.266944 psxtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23000 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88023000
=>  Loading section .init, size 0x48 lma ffffffff88023080
=>  Loading section .fini, size 0x30 lma ffffffff880230c8
=>  Loading section .ctors, size 0x8 lma ffffffff880230f8
=>  Loading section .dtors, size 0x8 lma ffffffff88023100
=>  Loading section .rdata, size 0x3598 lma ffffffff88023110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880266a8
=>  Loading section .data, size 0x644 lma ffffffff880266c0
=>  Start address ffffffff88000004
=>  Transfer rate: 1271776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[263/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxtimer02.exe
Result: invalid   
Time: 0:00:00.266829 psxtimer02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x136f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880136f0
=>  Loading section .init, size 0x48 lma ffffffff88013770
=>  Loading section .fini, size 0x30 lma ffffffff880137b8
=>  Loading section .ctors, size 0x8 lma ffffffff880137e8
=>  Loading section .dtors, size 0x8 lma ffffffff880137f0
=>  Loading section .rdata, size 0x2a34 lma ffffffff88013800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016238
=>  Loading section .data, size 0x448 lma ffffffff88016250
=>  Start address ffffffff88000004
=>  Transfer rate: 734304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[264/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxtimes01.exe
Result: invalid   
Time: 0:00:00.262385 psxtimes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103d0
=>  Loading section .init, size 0x48 lma ffffffff88010440
=>  Loading section .fini, size 0x30 lma ffffffff88010488
=>  Loading section .ctors, size 0x8 lma ffffffff880104b8
=>  Loading section .dtors, size 0x8 lma ffffffff880104c0
=>  Loading section .rdata, size 0x1b45 lma ffffffff880104d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012018
=>  Loading section .data, size 0x418 lma ffffffff88012030
=>  Start address ffffffff88000004
=>  Transfer rate: 598504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[265/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxualarm.exe
Result: invalid   
Time: 0:00:00.268782 psxualarm.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018730
=>  Loading section .init, size 0x48 lma ffffffff880187a0
=>  Loading section .fini, size 0x30 lma ffffffff880187e8
=>  Loading section .ctors, size 0x8 lma ffffffff88018818
=>  Loading section .dtors, size 0x8 lma ffffffff88018820
=>  Loading section .rdata, size 0x2378 lma ffffffff88018830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aba8
=>  Loading section .data, size 0x64c lma ffffffff8801abc0
=>  Start address ffffffff88000004
=>  Transfer rate: 888864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[266/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:258 W:0   | mipstx39/jmr3904: psxusleep.exe
Result: invalid   
Time: 0:00:00.262939 psxusleep.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x186e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880186e0
=>  Loading section .init, size 0x48 lma ffffffff88018750
=>  Loading section .fini, size 0x30 lma ffffffff88018798
=>  Loading section .ctors, size 0x8 lma ffffffff880187c8
=>  Loading section .dtors, size 0x8 lma ffffffff880187d0
=>  Loading section .rdata, size 0x22b0 lma ffffffff880187e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aa90
=>  Loading section .data, size 0x61c lma ffffffff8801aaa8
=>  Start address ffffffff88000004
=>  Transfer rate: 886240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[267/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid   
Time: 0:00:00.268669 psxtmbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100f0
=>  Loading section .init, size 0x48 lma ffffffff88010160
=>  Loading section .fini, size 0x30 lma ffffffff880101a8
=>  Loading section .ctors, size 0x8 lma ffffffff880101d8
=>  Loading section .dtors, size 0x8 lma ffffffff880101e0
=>  Loading section .rdata, size 0x1a75 lma ffffffff880101f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c68
=>  Loading section .data, size 0x408 lma ffffffff88011c80
=>  Start address ffffffff88000004
=>  Transfer rate: 590824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[268/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid   
Time: 0:00:00.275583 psxtmbarrier02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010390
=>  Loading section .init, size 0x48 lma ffffffff88010400
=>  Loading section .fini, size 0x30 lma ffffffff88010448
=>  Loading section .ctors, size 0x8 lma ffffffff88010478
=>  Loading section .dtors, size 0x8 lma ffffffff88010480
=>  Loading section .rdata, size 0x1a79 lma ffffffff88010490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f10
=>  Loading section .data, size 0x408 lma ffffffff88011f28
=>  Start address ffffffff88000004
=>  Transfer rate: 596232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[269/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid   
Time: 0:00:00.264394 psxtmbarrier03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102c0
=>  Loading section .init, size 0x48 lma ffffffff88010330
=>  Loading section .fini, size 0x30 lma ffffffff88010378
=>  Loading section .ctors, size 0x8 lma ffffffff880103a8
=>  Loading section .dtors, size 0x8 lma ffffffff880103b0
=>  Loading section .rdata, size 0x1aa1 lma ffffffff880103c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e68
=>  Loading section .data, size 0x408 lma ffffffff88011e80
=>  Start address ffffffff88000004
=>  Transfer rate: 594888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[270/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid   
Time: 0:00:00.275989 psxtmbarrier04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106d0
=>  Loading section .init, size 0x48 lma ffffffff88010740
=>  Loading section .fini, size 0x30 lma ffffffff88010788
=>  Loading section .ctors, size 0x8 lma ffffffff880107b8
=>  Loading section .dtors, size 0x8 lma ffffffff880107c0
=>  Loading section .rdata, size 0x1a71 lma ffffffff880107d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012248
=>  Loading section .data, size 0x408 lma ffffffff88012260
=>  Start address ffffffff88000004
=>  Transfer rate: 602824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[271/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid   
Time: 0:00:00.273551 psxtmbarrierattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10110 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010110
=>  Loading section .init, size 0x48 lma ffffffff88010180
=>  Loading section .fini, size 0x30 lma ffffffff880101c8
=>  Loading section .ctors, size 0x8 lma ffffffff880101f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010200
=>  Loading section .rdata, size 0x1afd lma ffffffff88010210
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d10
=>  Loading section .data, size 0x408 lma ffffffff88011d28
=>  Start address ffffffff88000004
=>  Transfer rate: 592168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[272/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid   
Time: 0:00:00.269883 psxtmcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10110 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010110
=>  Loading section .init, size 0x48 lma ffffffff88010180
=>  Loading section .fini, size 0x30 lma ffffffff880101c8
=>  Loading section .ctors, size 0x8 lma ffffffff880101f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010200
=>  Loading section .rdata, size 0x1a75 lma ffffffff88010210
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c88
=>  Loading section .data, size 0x440 lma ffffffff88011ca0
=>  Start address ffffffff88000004
=>  Transfer rate: 591528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[273/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid   
Time: 0:00:00.288124 psxtmclocknanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10980 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010980
=>  Loading section .init, size 0x48 lma ffffffff880109f0
=>  Loading section .fini, size 0x30 lma ffffffff88010a38
=>  Loading section .ctors, size 0x8 lma ffffffff88010a68
=>  Loading section .dtors, size 0x8 lma ffffffff88010a70
=>  Loading section .rdata, size 0x1a1d lma ffffffff88010a80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124a0
=>  Loading section .data, size 0x418 lma ffffffff880124b8
=>  Start address ffffffff88000004
=>  Transfer rate: 607784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[274/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:266 W:0   | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid   
Time: 0:00:00.265597 psxtmclocknanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010aa0
=>  Loading section .init, size 0x48 lma ffffffff88010b10
=>  Loading section .fini, size 0x30 lma ffffffff88010b58
=>  Loading section .ctors, size 0x8 lma ffffffff88010b88
=>  Loading section .dtors, size 0x8 lma ffffffff88010b90
=>  Loading section .rdata, size 0x1a71 lma ffffffff88010ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012618
=>  Loading section .data, size 0x410 lma ffffffff88012630
=>  Start address ffffffff88000004
=>  Transfer rate: 610696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[275/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid   
Time: 0:00:00.252771 psxtmclocknanosleep03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010aa0
=>  Loading section .init, size 0x48 lma ffffffff88010b10
=>  Loading section .fini, size 0x30 lma ffffffff88010b58
=>  Loading section .ctors, size 0x8 lma ffffffff88010b88
=>  Loading section .dtors, size 0x8 lma ffffffff88010b90
=>  Loading section .rdata, size 0x1a71 lma ffffffff88010ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012618
=>  Loading section .data, size 0x410 lma ffffffff88012630
=>  Start address ffffffff88000004
=>  Transfer rate: 610696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[276/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid   
Time: 0:00:00.261610 psxtmcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880101e0
=>  Loading section .init, size 0x48 lma ffffffff88010250
=>  Loading section .fini, size 0x30 lma ffffffff88010298
=>  Loading section .ctors, size 0x8 lma ffffffff880102c8
=>  Loading section .dtors, size 0x8 lma ffffffff880102d0
=>  Loading section .rdata, size 0x1a85 lma ffffffff880102e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d68
=>  Loading section .data, size 0x408 lma ffffffff88011d80
=>  Start address ffffffff88000004
=>  Transfer rate: 592872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[277/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid   
Time: 0:00:00.259135 psxtmcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010470
=>  Loading section .init, size 0x48 lma ffffffff880104e0
=>  Loading section .fini, size 0x30 lma ffffffff88010528
=>  Loading section .ctors, size 0x8 lma ffffffff88010558
=>  Loading section .dtors, size 0x8 lma ffffffff88010560
=>  Loading section .rdata, size 0x1a7d lma ffffffff88010570
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ff0
=>  Loading section .data, size 0x408 lma ffffffff88012008
=>  Start address ffffffff88000004
=>  Transfer rate: 598056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[278/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid   
Time: 0:00:00.264428 psxtmcond03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b60
=>  Loading section .init, size 0x48 lma ffffffff88011bd0
=>  Loading section .fini, size 0x30 lma ffffffff88011c18
=>  Loading section .ctors, size 0x8 lma ffffffff88011c48
=>  Loading section .dtors, size 0x8 lma ffffffff88011c50
=>  Loading section .rdata, size 0x1aa9 lma ffffffff88011c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013710
=>  Loading section .data, size 0x408 lma ffffffff88013728
=>  Start address ffffffff88000004
=>  Transfer rate: 645384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[279/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid   
Time: 0:00:00.256846 psxtmcond04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b40
=>  Loading section .init, size 0x48 lma ffffffff88011bb0
=>  Loading section .fini, size 0x30 lma ffffffff88011bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c28
=>  Loading section .dtors, size 0x8 lma ffffffff88011c30
=>  Loading section .rdata, size 0x1aa1 lma ffffffff88011c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136e8
=>  Loading section .data, size 0x408 lma ffffffff88013700
=>  Start address ffffffff88000004
=>  Transfer rate: 645064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[280/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid   
Time: 0:00:00.255476 psxtmcond05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010470
=>  Loading section .init, size 0x48 lma ffffffff880104e0
=>  Loading section .fini, size 0x30 lma ffffffff88010528
=>  Loading section .ctors, size 0x8 lma ffffffff88010558
=>  Loading section .dtors, size 0x8 lma ffffffff88010560
=>  Loading section .rdata, size 0x1a85 lma ffffffff88010570
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ff8
=>  Loading section .data, size 0x408 lma ffffffff88012010
=>  Start address ffffffff88000004
=>  Transfer rate: 598120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[281/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid   
Time: 0:00:00.257257 psxtmcond06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11cb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011cb0
=>  Loading section .init, size 0x48 lma ffffffff88011d20
=>  Loading section .fini, size 0x30 lma ffffffff88011d68
=>  Loading section .ctors, size 0x8 lma ffffffff88011d98
=>  Loading section .dtors, size 0x8 lma ffffffff88011da0
=>  Loading section .rdata, size 0x1ab1 lma ffffffff88011db0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013868
=>  Loading section .data, size 0x408 lma ffffffff88013880
=>  Start address ffffffff88000004
=>  Transfer rate: 648136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[282/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:274 W:0   | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid   
Time: 0:00:00.251412 psxtmcond07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011850
=>  Loading section .init, size 0x48 lma ffffffff880118c0
=>  Loading section .fini, size 0x30 lma ffffffff88011908
=>  Loading section .ctors, size 0x8 lma ffffffff88011938
=>  Loading section .dtors, size 0x8 lma ffffffff88011940
=>  Loading section .rdata, size 0x1ab1 lma ffffffff88011950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013408
=>  Loading section .data, size 0x408 lma ffffffff88013420
=>  Start address ffffffff88000004
=>  Transfer rate: 639176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[283/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid   
Time: 0:00:00.251067 psxtmcond08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011540
=>  Loading section .init, size 0x48 lma ffffffff880115b0
=>  Loading section .fini, size 0x30 lma ffffffff880115f8
=>  Loading section .ctors, size 0x8 lma ffffffff88011628
=>  Loading section .dtors, size 0x8 lma ffffffff88011630
=>  Loading section .rdata, size 0x1aa1 lma ffffffff88011640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130e8
=>  Loading section .data, size 0x408 lma ffffffff88013100
=>  Start address ffffffff88000004
=>  Transfer rate: 632776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[284/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid   
Time: 0:00:00.255634 psxtmcond09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11570 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011570
=>  Loading section .init, size 0x48 lma ffffffff880115e0
=>  Loading section .fini, size 0x30 lma ffffffff88011628
=>  Loading section .ctors, size 0x8 lma ffffffff88011658
=>  Loading section .dtors, size 0x8 lma ffffffff88011660
=>  Loading section .rdata, size 0x1ab1 lma ffffffff88011670
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013128
=>  Loading section .data, size 0x408 lma ffffffff88013140
=>  Start address ffffffff88000004
=>  Transfer rate: 633288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[285/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid   
Time: 0:00:00.261953 psxtmcond10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115d0
=>  Loading section .init, size 0x48 lma ffffffff88011640
=>  Loading section .fini, size 0x30 lma ffffffff88011688
=>  Loading section .ctors, size 0x8 lma ffffffff880116b8
=>  Loading section .dtors, size 0x8 lma ffffffff880116c0
=>  Loading section .rdata, size 0x1ac9 lma ffffffff880116d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131a0
=>  Loading section .data, size 0x408 lma ffffffff880131b8
=>  Start address ffffffff88000004
=>  Transfer rate: 634248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[286/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid   
Time: 0:00:00.257215 psxtmkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103e0
=>  Loading section .init, size 0x48 lma ffffffff88010450
=>  Loading section .fini, size 0x30 lma ffffffff88010498
=>  Loading section .ctors, size 0x8 lma ffffffff880104c8
=>  Loading section .dtors, size 0x8 lma ffffffff880104d0
=>  Loading section .rdata, size 0x1a6d lma ffffffff880104e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f50
=>  Loading section .data, size 0x470 lma ffffffff88011f68
=>  Start address ffffffff88000004
=>  Transfer rate: 597608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[287/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid   
Time: 0:00:00.261752 psxtmkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108e0
=>  Loading section .init, size 0x48 lma ffffffff88010950
=>  Loading section .fini, size 0x30 lma ffffffff88010998
=>  Loading section .ctors, size 0x8 lma ffffffff880109c8
=>  Loading section .dtors, size 0x8 lma ffffffff880109d0
=>  Loading section .rdata, size 0x1a8d lma ffffffff880109e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012470
=>  Loading section .data, size 0x470 lma ffffffff88012488
=>  Start address ffffffff88000004
=>  Transfer rate: 608104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[288/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid   
Time: 0:00:00.270631 psxtmmq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12cf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012cf0
=>  Loading section .init, size 0x48 lma ffffffff88012d60
=>  Loading section .fini, size 0x30 lma ffffffff88012da8
=>  Loading section .ctors, size 0x8 lma ffffffff88012dd8
=>  Loading section .dtors, size 0x8 lma ffffffff88012de0
=>  Loading section .rdata, size 0x1d2d lma ffffffff88012df0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014b20
=>  Loading section .data, size 0x448 lma ffffffff88014b38
=>  Start address ffffffff88000004
=>  Transfer rate: 687016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[289/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid   
Time: 0:00:00.253460 psxtmmqrcvblock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10df0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010df0
=>  Loading section .init, size 0x48 lma ffffffff88010e60
=>  Loading section .fini, size 0x30 lma ffffffff88010ea8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ed8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ee0
=>  Loading section .rdata, size 0x1a91 lma ffffffff88010ef0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012988
=>  Loading section .data, size 0x438 lma ffffffff880129a0
=>  Start address ffffffff88000004
=>  Transfer rate: 618056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[290/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid   
Time: 0:00:00.258389 psxtmmqrcvblock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c60
=>  Loading section .init, size 0x48 lma ffffffff88014cd0
=>  Loading section .fini, size 0x30 lma ffffffff88014d18
=>  Loading section .ctors, size 0x8 lma ffffffff88014d48
=>  Loading section .dtors, size 0x8 lma ffffffff88014d50
=>  Loading section .rdata, size 0x1c5c lma ffffffff88014d60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169c0
=>  Loading section .data, size 0x4a8 lma ffffffff880169d8
=>  Start address ffffffff88000004
=>  Transfer rate: 750496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[291/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid   
Time: 0:00:00.253174 psxtmmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10230 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010230
=>  Loading section .init, size 0x48 lma ffffffff880102a0
=>  Loading section .fini, size 0x30 lma ffffffff880102e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010318
=>  Loading section .dtors, size 0x8 lma ffffffff88010320
=>  Loading section .rdata, size 0x1a8d lma ffffffff88010330
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011dc0
=>  Loading section .data, size 0x408 lma ffffffff88011dd8
=>  Start address ffffffff88000004
=>  Transfer rate: 593576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[292/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid   
Time: 0:00:00.256904 psxtmmutex02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10760 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010760
=>  Loading section .init, size 0x48 lma ffffffff880107d0
=>  Loading section .fini, size 0x30 lma ffffffff88010818
=>  Loading section .ctors, size 0x8 lma ffffffff88010848
=>  Loading section .dtors, size 0x8 lma ffffffff88010850
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010860
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e8
=>  Loading section .data, size 0x408 lma ffffffff88012300
=>  Start address ffffffff88000004
=>  Transfer rate: 604104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[293/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid   
Time: 0:00:00.270492 psxtmmutex03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110d0
=>  Loading section .init, size 0x48 lma ffffffff88011140
=>  Loading section .fini, size 0x30 lma ffffffff88011188
=>  Loading section .ctors, size 0x8 lma ffffffff880111b8
=>  Loading section .dtors, size 0x8 lma ffffffff880111c0
=>  Loading section .rdata, size 0x1b15 lma ffffffff880111d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ce8
=>  Loading section .data, size 0x408 lma ffffffff88012d00
=>  Start address ffffffff88000004
=>  Transfer rate: 624616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[294/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid   
Time: 0:00:00.256362 psxtmmutex04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b90
=>  Loading section .init, size 0x48 lma ffffffff88010c00
=>  Loading section .fini, size 0x30 lma ffffffff88010c48
=>  Loading section .ctors, size 0x8 lma ffffffff88010c78
=>  Loading section .dtors, size 0x8 lma ffffffff88010c80
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010c90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012720
=>  Loading section .data, size 0x408 lma ffffffff88012738
=>  Start address ffffffff88000004
=>  Transfer rate: 612744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[295/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid   
Time: 0:00:00.258862 psxtmmutex05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a40
=>  Loading section .init, size 0x48 lma ffffffff88010ab0
=>  Loading section .fini, size 0x30 lma ffffffff88010af8
=>  Loading section .ctors, size 0x8 lma ffffffff88010b28
=>  Loading section .dtors, size 0x8 lma ffffffff88010b30
=>  Loading section .rdata, size 0x1a91 lma ffffffff88010b40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125d8
=>  Loading section .data, size 0x408 lma ffffffff880125f0
=>  Start address ffffffff88000004
=>  Transfer rate: 610120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[296/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid   
Time: 0:00:00.263074 psxtmmutex06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c40
=>  Loading section .init, size 0x48 lma ffffffff88010cb0
=>  Loading section .fini, size 0x30 lma ffffffff88010cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88010d28
=>  Loading section .dtors, size 0x8 lma ffffffff88010d30
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127d0
=>  Loading section .data, size 0x408 lma ffffffff880127e8
=>  Start address ffffffff88000004
=>  Transfer rate: 614152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[297/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid   
Time: 0:00:00.258322 psxtmmutex07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e30
=>  Loading section .init, size 0x48 lma ffffffff88010ea0
=>  Loading section .fini, size 0x30 lma ffffffff88010ee8
=>  Loading section .ctors, size 0x8 lma ffffffff88010f18
=>  Loading section .dtors, size 0x8 lma ffffffff88010f20
=>  Loading section .rdata, size 0x1aa5 lma ffffffff88010f30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129d8
=>  Loading section .data, size 0x408 lma ffffffff880129f0
=>  Start address ffffffff88000004
=>  Transfer rate: 618344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[298/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid   
Time: 0:00:00.254333 psxtmmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10490 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010490
=>  Loading section .init, size 0x48 lma ffffffff88010500
=>  Loading section .fini, size 0x30 lma ffffffff88010548
=>  Loading section .ctors, size 0x8 lma ffffffff88010578
=>  Loading section .dtors, size 0x8 lma ffffffff88010580
=>  Loading section .rdata, size 0x1c6d lma ffffffff88010590
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012200
=>  Loading section .data, size 0x408 lma ffffffff88012218
=>  Start address ffffffff88000004
=>  Transfer rate: 602280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[299/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid   
Time: 0:00:00.256814 psxtmnanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109d0
=>  Loading section .init, size 0x48 lma ffffffff88010a40
=>  Loading section .fini, size 0x30 lma ffffffff88010a88
=>  Loading section .ctors, size 0x8 lma ffffffff88010ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ac0
=>  Loading section .rdata, size 0x1a15 lma ffffffff88010ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e8
=>  Loading section .data, size 0x410 lma ffffffff88012500
=>  Start address ffffffff88000004
=>  Transfer rate: 608296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[300/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid   
Time: 0:00:00.256629 psxtmnanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ae0
=>  Loading section .init, size 0x48 lma ffffffff88010b50
=>  Loading section .fini, size 0x30 lma ffffffff88010b98
=>  Loading section .ctors, size 0x8 lma ffffffff88010bc8
=>  Loading section .dtors, size 0x8 lma ffffffff88010bd0
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010be0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012650
=>  Loading section .data, size 0x418 lma ffffffff88012668
=>  Start address ffffffff88000004
=>  Transfer rate: 611208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[301/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid   
Time: 0:00:00.260500 psxtmonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010450
=>  Loading section .init, size 0x48 lma ffffffff880104c0
=>  Loading section .fini, size 0x30 lma ffffffff88010508
=>  Loading section .ctors, size 0x8 lma ffffffff88010538
=>  Loading section .dtors, size 0x8 lma ffffffff88010540
=>  Loading section .rdata, size 0x1a65 lma ffffffff88010550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fb8
=>  Loading section .data, size 0x430 lma ffffffff88011fd0
=>  Start address ffffffff88000004
=>  Transfer rate: 597928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[302/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid   
Time: 0:00:00.259307 psxtmrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011190
=>  Loading section .init, size 0x48 lma ffffffff88011200
=>  Loading section .fini, size 0x30 lma ffffffff88011248
=>  Loading section .ctors, size 0x8 lma ffffffff88011278
=>  Loading section .dtors, size 0x8 lma ffffffff88011280
=>  Loading section .rdata, size 0x1bfd lma ffffffff88011290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e90
=>  Loading section .data, size 0x408 lma ffffffff88012ea8
=>  Start address ffffffff88000004
=>  Transfer rate: 628008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[303/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid   
Time: 0:00:00.258097 psxtmrwlock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010680
=>  Loading section .init, size 0x48 lma ffffffff880106f0
=>  Loading section .fini, size 0x30 lma ffffffff88010738
=>  Loading section .ctors, size 0x8 lma ffffffff88010768
=>  Loading section .dtors, size 0x8 lma ffffffff88010770
=>  Loading section .rdata, size 0x1a79 lma ffffffff88010780
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012200
=>  Loading section .data, size 0x408 lma ffffffff88012218
=>  Start address ffffffff88000004
=>  Transfer rate: 602248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[304/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid   
Time: 0:00:00.262307 psxtmrwlock03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d80
=>  Loading section .init, size 0x48 lma ffffffff88010df0
=>  Loading section .fini, size 0x30 lma ffffffff88010e38
=>  Loading section .ctors, size 0x8 lma ffffffff88010e68
=>  Loading section .dtors, size 0x8 lma ffffffff88010e70
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012908
=>  Loading section .data, size 0x408 lma ffffffff88012920
=>  Start address ffffffff88000004
=>  Transfer rate: 616648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[305/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid   
Time: 0:00:00.257300 psxtmrwlock04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104e0
=>  Loading section .init, size 0x48 lma ffffffff88010550
=>  Loading section .fini, size 0x30 lma ffffffff88010598
=>  Loading section .ctors, size 0x8 lma ffffffff880105c8
=>  Loading section .dtors, size 0x8 lma ffffffff880105d0
=>  Loading section .rdata, size 0x1a79 lma ffffffff880105e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012060
=>  Loading section .data, size 0x408 lma ffffffff88012078
=>  Start address ffffffff88000004
=>  Transfer rate: 598920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[306/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid   
Time: 0:00:00.892852 psxtmrwlock05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10bb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010bb0
=>  Loading section .init, size 0x48 lma ffffffff88010c20
=>  Loading section .fini, size 0x30 lma ffffffff88010c68
=>  Loading section .ctors, size 0x8 lma ffffffff88010c98
=>  Loading section .dtors, size 0x8 lma ffffffff88010ca0
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010cb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012738
=>  Loading section .data, size 0x408 lma ffffffff88012750
=>  Start address ffffffff88000004
=>  Transfer rate: 612936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[307/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid   
Time: 0:00:00.888383 psxtmrwlock06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010630
=>  Loading section .init, size 0x48 lma ffffffff880106a0
=>  Loading section .fini, size 0x30 lma ffffffff880106e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010718
=>  Loading section .dtors, size 0x8 lma ffffffff88010720
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121b8
=>  Loading section .data, size 0x408 lma ffffffff880121d0
=>  Start address ffffffff88000004
=>  Transfer rate: 601672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[308/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid   
Time: 0:00:00.277069 psxtmrwlock07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010830
=>  Loading section .init, size 0x48 lma ffffffff880108a0
=>  Loading section .fini, size 0x30 lma ffffffff880108e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010918
=>  Loading section .dtors, size 0x8 lma ffffffff88010920
=>  Loading section .rdata, size 0x1a79 lma ffffffff88010930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123b0
=>  Loading section .data, size 0x408 lma ffffffff880123c8
=>  Start address ffffffff88000004
=>  Transfer rate: 605704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[309/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid   
Time: 0:00:00.258336 psxtmsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109b0
=>  Loading section .init, size 0x48 lma ffffffff88010a20
=>  Loading section .fini, size 0x30 lma ffffffff88010a68
=>  Loading section .ctors, size 0x8 lma ffffffff88010a98
=>  Loading section .dtors, size 0x8 lma ffffffff88010aa0
=>  Loading section .rdata, size 0x1b2d lma ffffffff88010ab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125e0
=>  Loading section .data, size 0x438 lma ffffffff880125f8
=>  Start address ffffffff88000004
=>  Transfer rate: 610600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[310/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid   
Time: 0:00:00.263119 psxtmsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10640 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010640
=>  Loading section .init, size 0x48 lma ffffffff880106b0
=>  Loading section .fini, size 0x30 lma ffffffff880106f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010728
=>  Loading section .dtors, size 0x8 lma ffffffff88010730
=>  Loading section .rdata, size 0x1ab5 lma ffffffff88010740
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121f8
=>  Loading section .data, size 0x408 lma ffffffff88012210
=>  Start address ffffffff88000004
=>  Transfer rate: 602216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[311/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid   
Time: 0:00:00.258637 psxtmsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010200
=>  Loading section .init, size 0x48 lma ffffffff88010270
=>  Loading section .fini, size 0x30 lma ffffffff880102b8
=>  Loading section .ctors, size 0x8 lma ffffffff880102e8
=>  Loading section .dtors, size 0x8 lma ffffffff880102f0
=>  Loading section .rdata, size 0x1a51 lma ffffffff88010300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d58
=>  Loading section .data, size 0x408 lma ffffffff88011d70
=>  Start address ffffffff88000004
=>  Transfer rate: 592712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[312/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid   
Time: 0:00:00.295911 psxtmsem04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f70
=>  Loading section .data, size 0x408 lma ffffffff88011f88
=>  Start address ffffffff88000004
=>  Transfer rate: 597000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[313/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid   
Time: 0:00:00.258360 psxtmsem05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10610 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010610
=>  Loading section .init, size 0x48 lma ffffffff88010680
=>  Loading section .fini, size 0x30 lma ffffffff880106c8
=>  Loading section .ctors, size 0x8 lma ffffffff880106f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010700
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012170
=>  Loading section .data, size 0x408 lma ffffffff88012188
=>  Start address ffffffff88000004
=>  Transfer rate: 601096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[314/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid   
Time: 0:00:00.259449 psxtmsleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a40
=>  Loading section .init, size 0x48 lma ffffffff88010ab0
=>  Loading section .fini, size 0x30 lma ffffffff88010af8
=>  Loading section .ctors, size 0x8 lma ffffffff88010b28
=>  Loading section .dtors, size 0x8 lma ffffffff88010b30
=>  Loading section .rdata, size 0x1a14 lma ffffffff88010b40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012558
=>  Loading section .data, size 0x414 lma ffffffff88012570
=>  Start address ffffffff88000004
=>  Transfer rate: 609216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[315/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid   
Time: 0:00:00.258144 psxtmsleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b10
=>  Loading section .init, size 0x48 lma ffffffff88010b80
=>  Loading section .fini, size 0x30 lma ffffffff88010bc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010bf8
=>  Loading section .dtors, size 0x8 lma ffffffff88010c00
=>  Loading section .rdata, size 0x1a60 lma ffffffff88010c10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012670
=>  Loading section .data, size 0x414 lma ffffffff88012688
=>  Start address ffffffff88000004
=>  Transfer rate: 611488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[316/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid   
Time: 0:00:00.252789 psxtmthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010070
=>  Loading section .init, size 0x48 lma ffffffff880100e0
=>  Loading section .fini, size 0x30 lma ffffffff88010128
=>  Loading section .ctors, size 0x8 lma ffffffff88010158
=>  Loading section .dtors, size 0x8 lma ffffffff88010160
=>  Loading section .rdata, size 0x1a49 lma ffffffff88010170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bc0
=>  Loading section .data, size 0x408 lma ffffffff88011bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 589448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[317/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid   
Time: 0:00:00.257724 psxtmthread02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10110 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010110
=>  Loading section .init, size 0x48 lma ffffffff88010180
=>  Loading section .fini, size 0x30 lma ffffffff880101c8
=>  Loading section .ctors, size 0x8 lma ffffffff880101f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010200
=>  Loading section .rdata, size 0x1a41 lma ffffffff88010210
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c58
=>  Loading section .data, size 0x408 lma ffffffff88011c70
=>  Start address ffffffff88000004
=>  Transfer rate: 590664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[318/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid   
Time: 0:00:00.258419 psxtmthread03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10030 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010030
=>  Loading section .init, size 0x48 lma ffffffff880100a0
=>  Loading section .fini, size 0x30 lma ffffffff880100e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010118
=>  Loading section .dtors, size 0x8 lma ffffffff88010120
=>  Loading section .rdata, size 0x1a41 lma ffffffff88010130
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b78
=>  Loading section .data, size 0x408 lma ffffffff88011b90
=>  Start address ffffffff88000004
=>  Transfer rate: 588872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[319/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid   
Time: 0:00:00.256915 psxtmthread04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103f0
=>  Loading section .init, size 0x48 lma ffffffff88010460
=>  Loading section .fini, size 0x30 lma ffffffff880104a8
=>  Loading section .ctors, size 0x8 lma ffffffff880104d8
=>  Loading section .dtors, size 0x8 lma ffffffff880104e0
=>  Loading section .rdata, size 0x1a7d lma ffffffff880104f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f70
=>  Loading section .data, size 0x408 lma ffffffff88011f88
=>  Start address ffffffff88000004
=>  Transfer rate: 597032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[320/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid   
Time: 0:00:00.256794 psxtmthread05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010430
=>  Loading section .init, size 0x48 lma ffffffff880104a0
=>  Loading section .fini, size 0x30 lma ffffffff880104e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010518
=>  Loading section .dtors, size 0x8 lma ffffffff88010520
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f98
=>  Loading section .data, size 0x408 lma ffffffff88011fb0
=>  Start address ffffffff88000004
=>  Transfer rate: 597320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[321/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid   
Time: 0:00:00.254748 psxtmthread06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010420
=>  Loading section .init, size 0x48 lma ffffffff88010490
=>  Loading section .fini, size 0x30 lma ffffffff880104d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010508
=>  Loading section .dtors, size 0x8 lma ffffffff88010510
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f88
=>  Loading section .data, size 0x408 lma ffffffff88011fa0
=>  Start address ffffffff88000004
=>  Transfer rate: 597192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[322/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid   
Time: 0:00:00.273293 psxtmthreadattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108c0
=>  Loading section .init, size 0x48 lma ffffffff88010930
=>  Loading section .fini, size 0x30 lma ffffffff88010978
=>  Loading section .ctors, size 0x8 lma ffffffff880109a8
=>  Loading section .dtors, size 0x8 lma ffffffff880109b0
=>  Loading section .rdata, size 0x1d89 lma ffffffff880109c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012750
=>  Loading section .data, size 0x408 lma ffffffff88012768
=>  Start address ffffffff88000004
=>  Transfer rate: 613128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[323/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid   
Time: 0:00:00.279234 rhdeadlockbrk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x116a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880116a0
=>  Loading section .init, size 0x48 lma ffffffff88011710
=>  Loading section .fini, size 0x30 lma ffffffff88011758
=>  Loading section .ctors, size 0x8 lma ffffffff88011788
=>  Loading section .dtors, size 0x8 lma ffffffff88011790
=>  Loading section .rdata, size 0x1e8d lma ffffffff880117a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013630
=>  Loading section .data, size 0x438 lma ffffffff88013648
=>  Start address ffffffff88000004
=>  Transfer rate: 644008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[324/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:316 W:0   | mipstx39/jmr3904: rhilatency.exe
Result: invalid   
Time: 0:00:00.257587 rhilatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb50
=>  Loading section .init, size 0x48 lma ffffffff8800fbc0
=>  Loading section .fini, size 0x30 lma ffffffff8800fc08
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc38
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc40
=>  Loading section .rdata, size 0x1dd5 lma ffffffff8800fc50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a28
=>  Loading section .data, size 0x408 lma ffffffff88011a40
=>  Start address ffffffff88000004
=>  Transfer rate: 586216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[325/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: rhmlatency.exe
Result: invalid   
Time: 0:00:00.287313 rhmlatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105a0
=>  Loading section .init, size 0x48 lma ffffffff88010610
=>  Loading section .fini, size 0x30 lma ffffffff88010658
=>  Loading section .ctors, size 0x8 lma ffffffff88010688
=>  Loading section .dtors, size 0x8 lma ffffffff88010690
=>  Loading section .rdata, size 0x1e31 lma ffffffff880106a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124d8
=>  Loading section .data, size 0x438 lma ffffffff880124f0
=>  Start address ffffffff88000004
=>  Transfer rate: 608456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[326/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid   
Time: 0:00:00.261730 rhsemshuffle.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f50
=>  Loading section .init, size 0x48 lma ffffffff88011fc0
=>  Loading section .fini, size 0x30 lma ffffffff88012008
=>  Loading section .ctors, size 0x8 lma ffffffff88012038
=>  Loading section .dtors, size 0x8 lma ffffffff88012040
=>  Loading section .rdata, size 0x1ea1 lma ffffffff88012050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ef8
=>  Loading section .data, size 0x448 lma ffffffff88013f10
=>  Start address ffffffff88000004
=>  Transfer rate: 662088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[327/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid   
Time: 0:00:00.263501 rhtaskpreempt.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f9a0
=>  Loading section .init, size 0x48 lma ffffffff8800fa10
=>  Loading section .fini, size 0x30 lma ffffffff8800fa58
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa88
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa90
=>  Loading section .rdata, size 0x1e1d lma ffffffff8800faa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118c0
=>  Loading section .data, size 0x408 lma ffffffff880118d8
=>  Start address ffffffff88000004
=>  Transfer rate: 583336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[328/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid   
Time: 0:00:00.263725 rhtaskswitch.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf820 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f820
=>  Loading section .init, size 0x48 lma ffffffff8800f890
=>  Loading section .fini, size 0x30 lma ffffffff8800f8d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f908
=>  Loading section .dtors, size 0x8 lma ffffffff8800f910
=>  Loading section .rdata, size 0x1e1d lma ffffffff8800f920
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011740
=>  Loading section .data, size 0x408 lma ffffffff88011758
=>  Start address ffffffff88000004
=>  Transfer rate: 580264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[329/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: base_sp.exe
Result: invalid   
Time: 0:00:00.262809 base_sp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010520
=>  Loading section .init, size 0x48 lma ffffffff88010590
=>  Loading section .fini, size 0x30 lma ffffffff880105d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010608
=>  Loading section .dtors, size 0x8 lma ffffffff88010610
=>  Loading section .rdata, size 0x1e61 lma ffffffff88010620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012488
=>  Loading section .data, size 0x418 lma ffffffff880124a0
=>  Start address ffffffff88000004
=>  Transfer rate: 607560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[330/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: capture.exe
Result: invalid   
Time: 0:00:00.259904 capture.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2fcb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8802fcb0
=>  Loading section .init, size 0x48 lma ffffffff8802fd30
=>  Loading section .fini, size 0x30 lma ffffffff8802fd78
=>  Loading section .ctors, size 0x8 lma ffffffff8802fda8
=>  Loading section .dtors, size 0x8 lma ffffffff8802fdb0
=>  Loading section .rdata, size 0x5710 lma ffffffff8802fdc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880354d0
=>  Loading section .data, size 0x984 lma ffffffff880354e8
=>  Start address ffffffff88000004
=>  Transfer rate: 1766176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[331/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: cdtest.exe
Result: invalid   
Time: 0:00:00.261745 cdtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2dbd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8802dbd0
=>  Loading section .init, size 0x48 lma ffffffff8802dc50
=>  Loading section .fini, size 0x30 lma ffffffff8802dc98
=>  Loading section .ctors, size 0x1c lma ffffffff8802dcc8
=>  Loading section .dtors, size 0x8 lma ffffffff8802dce4
=>  Loading section .rdata, size 0x463c lma ffffffff8802dcf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88032330
=>  Loading section .rel.dyn, size 0x20 lma ffffffff88032348
=>  Loading section .data, size 0x644 lma ffffffff88032368
=>  Loading section .sdata, size 0x4 lma ffffffff880329b0
=>  Start address ffffffff88000004
=>  Transfer rate: 1658176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[332/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:324 W:0   | mipstx39/jmr3904: fileio.exe
Result: invalid   
Time: 0:00:00.252421 fileio.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x85a10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88085a10
=>  Loading section .init, size 0x48 lma ffffffff88085a90
=>  Loading section .fini, size 0x30 lma ffffffff88085ad8
=>  Loading section .ctors, size 0x8 lma ffffffff88085b08
=>  Loading section .dtors, size 0x8 lma ffffffff88085b10
=>  Loading section .rdata, size 0x12a30 lma ffffffff88085b20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88098550
=>  Loading section .data, size 0x14a0 lma ffffffff88098568
=>  Start address ffffffff88000004
=>  Transfer rate: 5033984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[333/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: hello.exe
Result: invalid   
Time: 0:00:00.305921 hello.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17890 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017890
=>  Loading section .init, size 0x48 lma ffffffff88017900
=>  Loading section .fini, size 0x30 lma ffffffff88017948
=>  Loading section .ctors, size 0x8 lma ffffffff88017978
=>  Loading section .dtors, size 0x8 lma ffffffff88017980
=>  Loading section .rdata, size 0x1fe0 lma ffffffff88017990
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019970
=>  Loading section .data, size 0x5a8 lma ffffffff88019988
=>  Start address ffffffff88000004
=>  Transfer rate: 850240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[334/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: iostream.exe
Result: invalid   
Time: 0:00:00.838490 iostream.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x95940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88095940
=>  Loading section .init, size 0x48 lma ffffffff880959c0
=>  Loading section .fini, size 0x30 lma ffffffff88095a08
=>  Loading section .ctors, size 0x34 lma ffffffff88095a38
=>  Loading section .dtors, size 0x8 lma ffffffff88095a6c
=>  Loading section .rdata, size 0xa234 lma ffffffff88095a80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8809fcb8
=>  Loading section .rel.dyn, size 0x18 lma ffffffff8809fcd0
=>  Loading section .data, size 0x718 lma ffffffff8809fce8
=>  Loading section .sdata, size 0x4 lma ffffffff880a0400
=>  Start address ffffffff88000004
=>  Transfer rate: 5250976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[335/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: minimum.exe
[336/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: nsecs.exe
Result: invalid   
Time: 0:00:00.292163 nsecs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018210
=>  Loading section .init, size 0x48 lma ffffffff88018280
=>  Loading section .fini, size 0x30 lma ffffffff880182c8
=>  Loading section .ctors, size 0x8 lma ffffffff880182f8
=>  Loading section .dtors, size 0x8 lma ffffffff88018300
=>  Loading section .rdata, size 0x2770 lma ffffffff88018310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aa80
=>  Loading section .data, size 0x61c lma ffffffff8801aa98
=>  Start address ffffffff88000004
=>  Transfer rate: 886112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[337/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: paranoia.exe
Result: invalid   
Time: 0:00:00.263433 paranoia.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022520
=>  Loading section .init, size 0x48 lma ffffffff88022590
=>  Loading section .fini, size 0x30 lma ffffffff880225d8
=>  Loading section .ctors, size 0x8 lma ffffffff88022608
=>  Loading section .dtors, size 0x8 lma ffffffff88022610
=>  Loading section .rdata, size 0x5178 lma ffffffff88022620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027798
=>  Loading section .data, size 0x738 lma ffffffff880277b0
=>  Start address ffffffff88000004
=>  Transfer rate: 1308416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[338/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: ticker.exe
Result: invalid   
Time: 0:00:00.837757 ticker.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x118a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880118a0
=>  Loading section .init, size 0x48 lma ffffffff88011910
=>  Loading section .fini, size 0x30 lma ffffffff88011958
=>  Loading section .ctors, size 0x8 lma ffffffff88011988
=>  Loading section .dtors, size 0x8 lma ffffffff88011990
=>  Loading section .rdata, size 0x2014 lma ffffffff880119a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139b8
=>  Loading section .data, size 0x5c0 lma ffffffff880139d0
=>  Start address ffffffff88000004
=>  Transfer rate: 654368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[339/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: unlimited.exe
Result: invalid   
Time: 0:00:00.271474 unlimited.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x120a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880120a0
=>  Loading section .init, size 0x48 lma ffffffff88012110
=>  Loading section .fini, size 0x30 lma ffffffff88012158
=>  Loading section .ctors, size 0x8 lma ffffffff88012188
=>  Loading section .dtors, size 0x8 lma ffffffff88012190
=>  Loading section .rdata, size 0x1f48 lma ffffffff880121a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140e8
=>  Loading section .data, size 0x414 lma ffffffff88014100
=>  Start address ffffffff88000004
=>  Transfer rate: 665696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[340/597] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:332 W:0   | mipstx39/jmr3904: sp01.exe
Result: invalid   
Time: 0:00:00.549021 sp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xbca0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800bca0
=>  Loading section .init, size 0x48 lma ffffffff8800bd00
=>  Loading section .fini, size 0x30 lma ffffffff8800bd48
=>  Loading section .ctors, size 0x8 lma ffffffff8800bd78
=>  Loading section .dtors, size 0x8 lma ffffffff8800bd80
=>  Loading section .rdata, size 0x1c0c lma ffffffff8800bd90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d9a0
=>  Loading section .data, size 0x318 lma ffffffff8800d9b8
=>  Start address ffffffff88000004
=>  Transfer rate: 452128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[341/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:337 W:0   | mipstx39/jmr3904: sp02.exe
Result: invalid   
Time: 0:00:00.254580 sp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b50
=>  Loading section .init, size 0x48 lma ffffffff88011bc0
=>  Loading section .fini, size 0x30 lma ffffffff88011c08
=>  Loading section .ctors, size 0x8 lma ffffffff88011c38
=>  Loading section .dtors, size 0x8 lma ffffffff88011c40
=>  Loading section .rdata, size 0x22ed lma ffffffff88011c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f40
=>  Loading section .data, size 0x418 lma ffffffff88013f58
=>  Start address ffffffff88000004
=>  Transfer rate: 662312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[342/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:337 W:0   | mipstx39/jmr3904: sp03.exe
Result: invalid   
Time: 0:00:00.253219 sp03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d50
=>  Loading section .init, size 0x48 lma ffffffff88011dc0
=>  Loading section .fini, size 0x30 lma ffffffff88011e08
=>  Loading section .ctors, size 0x8 lma ffffffff88011e38
=>  Loading section .dtors, size 0x8 lma ffffffff88011e40
=>  Loading section .rdata, size 0x20d8 lma ffffffff88011e50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f28
=>  Loading section .data, size 0x440 lma ffffffff88013f40
=>  Start address ffffffff88000004
=>  Transfer rate: 662464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[343/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:337 W:0   | mipstx39/jmr3904: sp04.exe
Result: invalid   
Time: 0:00:00.253370 sp04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x136f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880136f0
=>  Loading section .init, size 0x48 lma ffffffff88013770
=>  Loading section .fini, size 0x30 lma ffffffff880137b8
=>  Loading section .ctors, size 0x8 lma ffffffff880137e8
=>  Loading section .dtors, size 0x8 lma ffffffff880137f0
=>  Loading section .rdata, size 0x2340 lma ffffffff88013800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015b40
=>  Loading section .data, size 0x610 lma ffffffff88015b58
=>  Start address ffffffff88000004
=>  Transfer rate: 723712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[344/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:337 W:0   | mipstx39/jmr3904: sp05.exe
Result: invalid   
Time: 0:00:00.253572 sp05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10da0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010da0
=>  Loading section .init, size 0x48 lma ffffffff88010e10
=>  Loading section .fini, size 0x30 lma ffffffff88010e58
=>  Loading section .ctors, size 0x8 lma ffffffff88010e88
=>  Loading section .dtors, size 0x8 lma ffffffff88010e90
=>  Loading section .rdata, size 0x2141 lma ffffffff88010ea0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012fe8
=>  Loading section .data, size 0x418 lma ffffffff88013000
=>  Start address ffffffff88000004
=>  Transfer rate: 630856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[345/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:337 W:0   | mipstx39/jmr3904: sp06.exe
Result: invalid   
Time: 0:00:00.257551 sp06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f20
=>  Loading section .init, size 0x48 lma ffffffff88010f90
=>  Loading section .fini, size 0x30 lma ffffffff88010fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011008
=>  Loading section .dtors, size 0x8 lma ffffffff88011010
=>  Loading section .rdata, size 0x1fcd lma ffffffff88011020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ff0
=>  Loading section .data, size 0x418 lma ffffffff88013008
=>  Start address ffffffff88000004
=>  Transfer rate: 630952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[346/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:337 W:0   | mipstx39/jmr3904: sp07.exe
Result: invalid   
Time: 0:00:00.254221 sp07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012840
=>  Loading section .init, size 0x48 lma ffffffff880128b0
=>  Loading section .fini, size 0x30 lma ffffffff880128f8
=>  Loading section .ctors, size 0x8 lma ffffffff88012928
=>  Loading section .dtors, size 0x8 lma ffffffff88012930
=>  Loading section .rdata, size 0x268c lma ffffffff88012940
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fd0
=>  Loading section .data, size 0x5e8 lma ffffffff88014fe8
=>  Start address ffffffff88000004
=>  Transfer rate: 699936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[347/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:340 W:0   | mipstx39/jmr3904: sp08.exe
Result: invalid   
Time: 0:00:00.257396 sp08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe90
=>  Loading section .init, size 0x48 lma ffffffff8800ff00
=>  Loading section .fini, size 0x30 lma ffffffff8800ff48
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff78
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff80
=>  Loading section .rdata, size 0x2125 lma ffffffff8800ff90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120b8
=>  Loading section .data, size 0x408 lma ffffffff880120d0
=>  Start address ffffffff88000004
=>  Transfer rate: 599656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[348/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:340 W:0   | mipstx39/jmr3904: sp11.exe
Result: invalid   
Time: 0:00:00.252217 sp11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015850
=>  Loading section .init, size 0x48 lma ffffffff880158c0
=>  Loading section .fini, size 0x30 lma ffffffff88015908
=>  Loading section .ctors, size 0x8 lma ffffffff88015938
=>  Loading section .dtors, size 0x8 lma ffffffff88015940
=>  Loading section .rdata, size 0x3075 lma ffffffff88015950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880189c8
=>  Loading section .data, size 0x470 lma ffffffff880189e0
=>  Start address ffffffff88000004
=>  Transfer rate: 815656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[349/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:345 W:0   | mipstx39/jmr3904: sp12.exe
Result: invalid   
Time: 0:00:00.369218 sp12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014690
=>  Loading section .init, size 0x48 lma ffffffff88014700
=>  Loading section .fini, size 0x30 lma ffffffff88014748
=>  Loading section .ctors, size 0x8 lma ffffffff88014778
=>  Loading section .dtors, size 0x8 lma ffffffff88014780
=>  Loading section .rdata, size 0x2ea4 lma ffffffff88014790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017638
=>  Loading section .data, size 0x448 lma ffffffff88017650
=>  Start address ffffffff88000004
=>  Transfer rate: 775264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[350/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp13.exe
Result: invalid   
Time: 0:00:00.323205 sp13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880148c0
=>  Loading section .init, size 0x48 lma ffffffff88014930
=>  Loading section .fini, size 0x30 lma ffffffff88014978
=>  Loading section .ctors, size 0x8 lma ffffffff880149a8
=>  Loading section .dtors, size 0x8 lma ffffffff880149b0
=>  Loading section .rdata, size 0x2c29 lma ffffffff880149c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880175f0
=>  Loading section .data, size 0x448 lma ffffffff88017608
=>  Start address ffffffff88000004
=>  Transfer rate: 774664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[351/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp14.exe
Result: invalid   
Time: 0:00:00.317837 sp14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x117a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880117a0
=>  Loading section .init, size 0x48 lma ffffffff88011810
=>  Loading section .fini, size 0x30 lma ffffffff88011858
=>  Loading section .ctors, size 0x8 lma ffffffff88011888
=>  Loading section .dtors, size 0x8 lma ffffffff88011890
=>  Loading section .rdata, size 0x2291 lma ffffffff880118a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b38
=>  Loading section .data, size 0x448 lma ffffffff88013b50
=>  Start address ffffffff88000004
=>  Transfer rate: 654408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[352/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp15.exe
Result: invalid   
Time: 0:00:00.289346 sp15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f50
=>  Loading section .init, size 0x48 lma ffffffff88010fc0
=>  Loading section .fini, size 0x30 lma ffffffff88011008
=>  Loading section .ctors, size 0x8 lma ffffffff88011038
=>  Loading section .dtors, size 0x8 lma ffffffff88011040
=>  Loading section .rdata, size 0x2211 lma ffffffff88011050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013268
=>  Loading section .data, size 0x448 lma ffffffff88013280
=>  Start address ffffffff88000004
=>  Transfer rate: 636360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[353/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp16.exe
Result: invalid   
Time: 0:00:00.323668 sp16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013b20
=>  Loading section .init, size 0x48 lma ffffffff88013b90
=>  Loading section .fini, size 0x30 lma ffffffff88013bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88013c08
=>  Loading section .dtors, size 0x8 lma ffffffff88013c10
=>  Loading section .rdata, size 0x2a99 lma ffffffff88013c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880166c0
=>  Loading section .data, size 0x448 lma ffffffff880166d8
=>  Start address ffffffff88000004
=>  Transfer rate: 743560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[354/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp17.exe
Result: invalid   
Time: 0:00:00.327118 sp17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10bf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010bf0
=>  Loading section .init, size 0x48 lma ffffffff88010c60
=>  Loading section .fini, size 0x30 lma ffffffff88010ca8
=>  Loading section .ctors, size 0x8 lma ffffffff88010cd8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ce0
=>  Loading section .rdata, size 0x1fad lma ffffffff88010cf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ca0
=>  Loading section .data, size 0x418 lma ffffffff88012cb8
=>  Start address ffffffff88000004
=>  Transfer rate: 624168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[355/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp18.exe
Result: invalid   
Time: 0:00:00.303513 sp18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010370
=>  Loading section .init, size 0x48 lma ffffffff880103e0
=>  Loading section .fini, size 0x30 lma ffffffff88010428
=>  Loading section .ctors, size 0x8 lma ffffffff88010458
=>  Loading section .dtors, size 0x8 lma ffffffff88010460
=>  Loading section .rdata, size 0x1eb9 lma ffffffff88010470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012330
=>  Loading section .data, size 0x438 lma ffffffff88012348
=>  Start address ffffffff88000004
=>  Transfer rate: 605064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[356/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:347 W:0   | mipstx39/jmr3904: sp19.exe
Result: invalid   
Time: 0:00:00.556710 sp19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1daa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801daa0
=>  Loading section .init, size 0x48 lma ffffffff8801db10
=>  Loading section .fini, size 0x30 lma ffffffff8801db58
=>  Loading section .ctors, size 0x8 lma ffffffff8801db88
=>  Loading section .dtors, size 0x8 lma ffffffff8801db90
=>  Loading section .rdata, size 0x3260 lma ffffffff8801dba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020e00
=>  Loading section .data, size 0x760 lma ffffffff88020e18
=>  Start address ffffffff88000004
=>  Transfer rate: 1092480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[357/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp20.exe
Result: invalid   
Time: 0:00:00.261000 sp20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a100
=>  Loading section .init, size 0x48 lma ffffffff8801a170
=>  Loading section .fini, size 0x30 lma ffffffff8801a1b8
=>  Loading section .ctors, size 0x8 lma ffffffff8801a1e8
=>  Loading section .dtors, size 0x8 lma ffffffff8801a1f0
=>  Loading section .rdata, size 0x2690 lma ffffffff8801a200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c890
=>  Loading section .data, size 0x5d0 lma ffffffff8801c8a8
=>  Start address ffffffff88000004
=>  Transfer rate: 947072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[358/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp2038.exe
Result: invalid   
Time: 0:00:00.255337 sp2038.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010600
=>  Loading section .init, size 0x48 lma ffffffff88010670
=>  Loading section .fini, size 0x30 lma ffffffff880106b8
=>  Loading section .ctors, size 0x8 lma ffffffff880106e8
=>  Loading section .dtors, size 0x8 lma ffffffff880106f0
=>  Loading section .rdata, size 0x1d79 lma ffffffff88010700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012480
=>  Loading section .data, size 0x440 lma ffffffff88012498
=>  Start address ffffffff88000004
=>  Transfer rate: 607816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[359/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp21.exe
Result: invalid   
Time: 0:00:00.264170 sp21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880148e0
=>  Loading section .init, size 0x48 lma ffffffff88014950
=>  Loading section .fini, size 0x30 lma ffffffff88014998
=>  Loading section .ctors, size 0x8 lma ffffffff880149c8
=>  Loading section .dtors, size 0x8 lma ffffffff880149d0
=>  Loading section .rdata, size 0x2668 lma ffffffff880149e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017048
=>  Loading section .data, size 0x470 lma ffffffff88017060
=>  Start address ffffffff88000004
=>  Transfer rate: 763456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[360/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp22.exe
Result: invalid   
Time: 0:00:00.255148 sp22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012750
=>  Loading section .init, size 0x48 lma ffffffff880127c0
=>  Loading section .fini, size 0x30 lma ffffffff88012808
=>  Loading section .ctors, size 0x8 lma ffffffff88012838
=>  Loading section .dtors, size 0x8 lma ffffffff88012840
=>  Loading section .rdata, size 0x2338 lma ffffffff88012850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014b88
=>  Loading section .data, size 0x470 lma ffffffff88014ba0
=>  Start address ffffffff88000004
=>  Transfer rate: 688192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[361/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp23.exe
Result: invalid   
Time: 0:00:00.261000 sp23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10990 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010990
=>  Loading section .init, size 0x48 lma ffffffff88010a00
=>  Loading section .fini, size 0x30 lma ffffffff88010a48
=>  Loading section .ctors, size 0x8 lma ffffffff88010a78
=>  Loading section .dtors, size 0x8 lma ffffffff88010a80
=>  Loading section .rdata, size 0x1f51 lma ffffffff88010a90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e8
=>  Loading section .data, size 0x448 lma ffffffff88012a00
=>  Start address ffffffff88000004
=>  Transfer rate: 618952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[362/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp24.exe
Result: invalid   
Time: 0:00:00.256925 sp24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011e60
=>  Loading section .init, size 0x48 lma ffffffff88011ed0
=>  Loading section .fini, size 0x30 lma ffffffff88011f18
=>  Loading section .ctors, size 0x8 lma ffffffff88011f48
=>  Loading section .dtors, size 0x8 lma ffffffff88011f50
=>  Loading section .rdata, size 0x20a8 lma ffffffff88011f60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014008
=>  Loading section .data, size 0x5c0 lma ffffffff88014020
=>  Start address ffffffff88000004
=>  Transfer rate: 667328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[363/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp25.exe
Result: invalid   
Time: 0:00:00.258071 sp25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d70
=>  Loading section .init, size 0x48 lma ffffffff88011de0
=>  Loading section .fini, size 0x30 lma ffffffff88011e28
=>  Loading section .ctors, size 0x8 lma ffffffff88011e58
=>  Loading section .dtors, size 0x8 lma ffffffff88011e60
=>  Loading section .rdata, size 0x232d lma ffffffff88011e70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141a0
=>  Loading section .data, size 0x448 lma ffffffff880141b8
=>  Start address ffffffff88000004
=>  Transfer rate: 667560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[364/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:355 W:0   | mipstx39/jmr3904: sp26.exe
Result: invalid   
Time: 0:00:00.258816 sp26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010840
=>  Loading section .init, size 0x48 lma ffffffff880108b0
=>  Loading section .fini, size 0x30 lma ffffffff880108f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010928
=>  Loading section .dtors, size 0x8 lma ffffffff88010930
=>  Loading section .rdata, size 0x1df5 lma ffffffff88010940
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012738
=>  Loading section .data, size 0x418 lma ffffffff88012750
=>  Start address ffffffff88000004
=>  Transfer rate: 613096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[365/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp27.exe
Result: invalid   
Time: 0:00:00.257556 sp27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=>  Loading section .init, size 0x48 lma ffffffff88011160
=>  Loading section .fini, size 0x30 lma ffffffff880111a8
=>  Loading section .ctors, size 0x8 lma ffffffff880111d8
=>  Loading section .dtors, size 0x8 lma ffffffff880111e0
=>  Loading section .rdata, size 0x1e91 lma ffffffff880111f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013088
=>  Loading section .data, size 0x448 lma ffffffff880130a0
=>  Start address ffffffff88000004
=>  Transfer rate: 632520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[366/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp27a.exe
Result: invalid   
Time: 0:00:00.254541 sp27a.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=>  Loading section .init, size 0x48 lma ffffffff88011160
=>  Loading section .fini, size 0x30 lma ffffffff880111a8
=>  Loading section .ctors, size 0x8 lma ffffffff880111d8
=>  Loading section .dtors, size 0x8 lma ffffffff880111e0
=>  Loading section .rdata, size 0x1ea1 lma ffffffff880111f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013098
=>  Loading section .data, size 0x448 lma ffffffff880130b0
=>  Start address ffffffff88000004
=>  Transfer rate: 632648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[367/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp29.exe
Result: invalid   
Time: 0:00:00.255819 sp29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011830
=>  Loading section .init, size 0x48 lma ffffffff880118a0
=>  Loading section .fini, size 0x30 lma ffffffff880118e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011918
=>  Loading section .dtors, size 0x8 lma ffffffff88011920
=>  Loading section .rdata, size 0x20c9 lma ffffffff88011930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a00
=>  Loading section .data, size 0x448 lma ffffffff88013a18
=>  Start address ffffffff88000004
=>  Transfer rate: 651912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[368/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp30.exe
Result: invalid   
Time: 0:00:00.254833 sp30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12660 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012660
=>  Loading section .init, size 0x48 lma ffffffff880126d0
=>  Loading section .fini, size 0x30 lma ffffffff88012718
=>  Loading section .ctors, size 0x8 lma ffffffff88012748
=>  Loading section .dtors, size 0x8 lma ffffffff88012750
=>  Loading section .rdata, size 0x21a4 lma ffffffff88012760
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014908
=>  Loading section .data, size 0x5c0 lma ffffffff88014920
=>  Start address ffffffff88000004
=>  Transfer rate: 685728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[369/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp31.exe
Result: invalid   
Time: 0:00:00.263257 sp31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014b30
=>  Loading section .init, size 0x48 lma ffffffff88014ba0
=>  Loading section .fini, size 0x30 lma ffffffff88014be8
=>  Loading section .ctors, size 0x8 lma ffffffff88014c18
=>  Loading section .dtors, size 0x8 lma ffffffff88014c20
=>  Loading section .rdata, size 0x26a8 lma ffffffff88014c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880172d8
=>  Loading section .data, size 0x470 lma ffffffff880172f0
=>  Start address ffffffff88000004
=>  Transfer rate: 768704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[370/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp32.exe
Result: invalid   
Time: 0:00:00.256970 sp32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e80
=>  Loading section .init, size 0x48 lma ffffffff88010ef0
=>  Loading section .fini, size 0x30 lma ffffffff88010f38
=>  Loading section .ctors, size 0x8 lma ffffffff88010f68
=>  Loading section .dtors, size 0x8 lma ffffffff88010f70
=>  Loading section .rdata, size 0x1e4d lma ffffffff88010f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012dd0
=>  Loading section .data, size 0x448 lma ffffffff88012de8
=>  Start address ffffffff88000004
=>  Transfer rate: 626984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[371/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp33.exe
Result: invalid   
Time: 0:00:00.256046 sp33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011850
=>  Loading section .init, size 0x48 lma ffffffff880118c0
=>  Loading section .fini, size 0x30 lma ffffffff88011908
=>  Loading section .ctors, size 0x8 lma ffffffff88011938
=>  Loading section .dtors, size 0x8 lma ffffffff88011940
=>  Loading section .rdata, size 0x23d9 lma ffffffff88011950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d30
=>  Loading section .data, size 0x448 lma ffffffff88013d48
=>  Start address ffffffff88000004
=>  Transfer rate: 658440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[372/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:363 W:0   | mipstx39/jmr3904: sp34.exe
Result: invalid   
Time: 0:00:00.252577 sp34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11880 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011880
=>  Loading section .init, size 0x48 lma ffffffff880118f0
=>  Loading section .fini, size 0x30 lma ffffffff88011938
=>  Loading section .ctors, size 0x8 lma ffffffff88011968
=>  Loading section .dtors, size 0x8 lma ffffffff88011970
=>  Loading section .rdata, size 0x1f39 lma ffffffff88011980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138c0
=>  Loading section .data, size 0x448 lma ffffffff880138d8
=>  Start address ffffffff88000004
=>  Transfer rate: 649352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[373/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp35.exe
Result: invalid   
Time: 0:00:00.266258 sp35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17e80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017e80
=>  Loading section .init, size 0x48 lma ffffffff88017ef0
=>  Loading section .fini, size 0x30 lma ffffffff88017f38
=>  Loading section .ctors, size 0x8 lma ffffffff88017f68
=>  Loading section .dtors, size 0x8 lma ffffffff88017f70
=>  Loading section .rdata, size 0x27a8 lma ffffffff88017f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a728
=>  Loading section .data, size 0x5b4 lma ffffffff8801a740
=>  Start address ffffffff88000004
=>  Transfer rate: 878432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[374/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp37.exe
Result: invalid   
Time: 0:00:00.258436 sp37.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x132a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880132a0
=>  Loading section .init, size 0x48 lma ffffffff88013310
=>  Loading section .fini, size 0x30 lma ffffffff88013358
=>  Loading section .ctors, size 0x8 lma ffffffff88013388
=>  Loading section .dtors, size 0x8 lma ffffffff88013390
=>  Loading section .rdata, size 0x279d lma ffffffff880133a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015b40
=>  Loading section .data, size 0x470 lma ffffffff88015b58
=>  Start address ffffffff88000004
=>  Transfer rate: 720360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[375/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp38.exe
Result: invalid   
Time: 0:00:00.271889 sp38.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109f0
=>  Loading section .init, size 0x48 lma ffffffff88010a60
=>  Loading section .fini, size 0x30 lma ffffffff88010aa8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ad8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ae0
=>  Loading section .rdata, size 0x1e59 lma ffffffff88010af0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012950
=>  Loading section .data, size 0x448 lma ffffffff88012968
=>  Start address ffffffff88000004
=>  Transfer rate: 617736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[376/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp40.exe
Result: invalid   
Time: 0:00:00.257572 sp40.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b50
=>  Loading section .init, size 0x48 lma ffffffff88010bc0
=>  Loading section .fini, size 0x30 lma ffffffff88010c08
=>  Loading section .ctors, size 0x8 lma ffffffff88010c38
=>  Loading section .dtors, size 0x8 lma ffffffff88010c40
=>  Loading section .rdata, size 0x20b9 lma ffffffff88010c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d10
=>  Loading section .data, size 0x460 lma ffffffff88012d28
=>  Start address ffffffff88000004
=>  Transfer rate: 625608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[377/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp41.exe
Result: invalid   
Time: 0:00:00.260336 sp41.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010150
=>  Loading section .init, size 0x48 lma ffffffff880101c0
=>  Loading section .fini, size 0x30 lma ffffffff88010208
=>  Loading section .ctors, size 0x8 lma ffffffff88010238
=>  Loading section .dtors, size 0x8 lma ffffffff88010240
=>  Loading section .rdata, size 0x1ac1 lma ffffffff88010250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d18
=>  Loading section .data, size 0x418 lma ffffffff88011d30
=>  Start address ffffffff88000004
=>  Transfer rate: 592328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[378/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp42.exe
Result: invalid   
Time: 0:00:00.274944 sp42.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012970
=>  Loading section .init, size 0x48 lma ffffffff880129e0
=>  Loading section .fini, size 0x30 lma ffffffff88012a28
=>  Loading section .ctors, size 0x8 lma ffffffff88012a58
=>  Loading section .dtors, size 0x8 lma ffffffff88012a60
=>  Loading section .rdata, size 0x22a4 lma ffffffff88012a70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d18
=>  Loading section .data, size 0x598 lma ffffffff88014d30
=>  Start address ffffffff88000004
=>  Transfer rate: 693728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[379/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp43.exe
Result: invalid   
Time: 0:00:00.256618 sp43.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12900 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012900
=>  Loading section .init, size 0x48 lma ffffffff88012970
=>  Loading section .fini, size 0x30 lma ffffffff880129b8
=>  Loading section .ctors, size 0x8 lma ffffffff880129e8
=>  Loading section .dtors, size 0x8 lma ffffffff880129f0
=>  Loading section .rdata, size 0x2f78 lma ffffffff88012a00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015978
=>  Loading section .data, size 0x478 lma ffffffff88015990
=>  Start address ffffffff88000004
=>  Transfer rate: 716800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[380/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:371 W:0   | mipstx39/jmr3904: sp44.exe
Result: invalid   
Time: 0:00:00.514188 sp44.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108a0
=>  Loading section .init, size 0x48 lma ffffffff88010910
=>  Loading section .fini, size 0x30 lma ffffffff88010958
=>  Loading section .ctors, size 0x8 lma ffffffff88010988
=>  Loading section .dtors, size 0x8 lma ffffffff88010990
=>  Loading section .rdata, size 0x1e2d lma ffffffff880109a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127d0
=>  Loading section .data, size 0x418 lma ffffffff880127e8
=>  Start address ffffffff88000004
=>  Transfer rate: 614312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[381/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp45.exe
Result: invalid   
Time: 0:00:00.257149 sp45.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10eb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010eb0
=>  Loading section .init, size 0x48 lma ffffffff88010f20
=>  Loading section .fini, size 0x30 lma ffffffff88010f68
=>  Loading section .ctors, size 0x8 lma ffffffff88010f98
=>  Loading section .dtors, size 0x8 lma ffffffff88010fa0
=>  Loading section .rdata, size 0x1fc1 lma ffffffff88010fb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f78
=>  Loading section .data, size 0x448 lma ffffffff88012f90
=>  Start address ffffffff88000004
=>  Transfer rate: 630344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[382/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp46.exe
Result: invalid   
Time: 0:00:00.263114 sp46.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f70
=>  Loading section .init, size 0x48 lma ffffffff88010fe0
=>  Loading section .fini, size 0x30 lma ffffffff88011028
=>  Loading section .ctors, size 0x8 lma ffffffff88011058
=>  Loading section .dtors, size 0x8 lma ffffffff88011060
=>  Loading section .rdata, size 0x1e71 lma ffffffff88011070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ee8
=>  Loading section .data, size 0x448 lma ffffffff88012f00
=>  Start address ffffffff88000004
=>  Transfer rate: 629192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[383/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp47.exe
Result: invalid   
Time: 0:00:00.258183 sp47.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104f0
=>  Loading section .init, size 0x48 lma ffffffff88010560
=>  Loading section .fini, size 0x30 lma ffffffff880105a8
=>  Loading section .ctors, size 0x8 lma ffffffff880105d8
=>  Loading section .dtors, size 0x8 lma ffffffff880105e0
=>  Loading section .rdata, size 0x1a0d lma ffffffff880105f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012000
=>  Loading section .data, size 0x418 lma ffffffff88012018
=>  Start address ffffffff88000004
=>  Transfer rate: 598312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[384/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp48.exe
Result: invalid   
Time: 0:00:00.257368 sp48.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102d0
=>  Loading section .init, size 0x48 lma ffffffff88010340
=>  Loading section .fini, size 0x30 lma ffffffff88010388
=>  Loading section .ctors, size 0x8 lma ffffffff880103b8
=>  Loading section .dtors, size 0x8 lma ffffffff880103c0
=>  Loading section .rdata, size 0x1ea8 lma ffffffff880103d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012278
=>  Loading section .data, size 0x438 lma ffffffff88012290
=>  Start address ffffffff88000004
=>  Transfer rate: 603648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[385/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp49.exe
Result: invalid   
Time: 0:00:00.263334 sp49.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fa80
=>  Loading section .init, size 0x48 lma ffffffff8800faf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fb38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fb70
=>  Loading section .rdata, size 0x1e25 lma ffffffff8800fb80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119a8
=>  Loading section .data, size 0x438 lma ffffffff880119c0
=>  Start address ffffffff88000004
=>  Transfer rate: 585576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[386/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp50.exe
Result: invalid   
Time: 0:00:00.266834 sp50.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e10
=>  Loading section .init, size 0x48 lma ffffffff88010e80
=>  Loading section .fini, size 0x30 lma ffffffff88010ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88010f00
=>  Loading section .rdata, size 0x1e0d lma ffffffff88010f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d20
=>  Loading section .data, size 0x448 lma ffffffff88012d38
=>  Start address ffffffff88000004
=>  Transfer rate: 625576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[387/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp51.exe
Result: invalid   
Time: 0:00:00.261060 sp51.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c30
=>  Loading section .init, size 0x48 lma ffffffff88010ca0
=>  Loading section .fini, size 0x30 lma ffffffff88010ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88010d18
=>  Loading section .dtors, size 0x8 lma ffffffff88010d20
=>  Loading section .rdata, size 0x1f3d lma ffffffff88010d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c70
=>  Loading section .data, size 0x438 lma ffffffff88012c88
=>  Start address ffffffff88000004
=>  Transfer rate: 624040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[388/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:379 W:0   | mipstx39/jmr3904: sp52.exe
Result: invalid   
Time: 0:00:00.257670 sp52.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011580
=>  Loading section .init, size 0x48 lma ffffffff880115f0
=>  Loading section .fini, size 0x30 lma ffffffff88011638
=>  Loading section .ctors, size 0x8 lma ffffffff88011668
=>  Loading section .dtors, size 0x8 lma ffffffff88011670
=>  Loading section .rdata, size 0x1f4d lma ffffffff88011680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135d0
=>  Loading section .data, size 0x470 lma ffffffff880135e8
=>  Start address ffffffff88000004
=>  Transfer rate: 643688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[389/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp53.exe
Result: invalid   
Time: 0:00:00.259705 sp53.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c20
=>  Loading section .init, size 0x48 lma ffffffff88011c90
=>  Loading section .fini, size 0x30 lma ffffffff88011cd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d08
=>  Loading section .dtors, size 0x8 lma ffffffff88011d10
=>  Loading section .rdata, size 0x1f75 lma ffffffff88011d20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c98
=>  Loading section .data, size 0x470 lma ffffffff88013cb0
=>  Start address ffffffff88000004
=>  Transfer rate: 657576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[390/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp54.exe
Result: invalid   
Time: 0:00:00.255139 sp54.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf1b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f1b0
=>  Loading section .init, size 0x48 lma ffffffff8800f220
=>  Loading section .fini, size 0x30 lma ffffffff8800f268
=>  Loading section .ctors, size 0x8 lma ffffffff8800f298
=>  Loading section .dtors, size 0x8 lma ffffffff8800f2a0
=>  Loading section .rdata, size 0x1e30 lma ffffffff8800f2b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880110e0
=>  Loading section .data, size 0x548 lma ffffffff880110f8
=>  Start address ffffffff88000004
=>  Transfer rate: 569792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[391/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp55.exe
Result: invalid   
Time: 0:00:00.258656 sp55.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010310
=>  Loading section .init, size 0x48 lma ffffffff88010380
=>  Loading section .fini, size 0x30 lma ffffffff880103c8
=>  Loading section .ctors, size 0x8 lma ffffffff880103f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010400
=>  Loading section .rdata, size 0x1f05 lma ffffffff88010410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012318
=>  Loading section .data, size 0x438 lma ffffffff88012330
=>  Start address ffffffff88000004
=>  Transfer rate: 604904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[392/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp56.exe
Result: invalid   
Time: 0:00:00.259084 sp56.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf890 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f890
=>  Loading section .init, size 0x48 lma ffffffff8800f900
=>  Loading section .fini, size 0x30 lma ffffffff8800f948
=>  Loading section .ctors, size 0x8 lma ffffffff8800f978
=>  Loading section .dtors, size 0x8 lma ffffffff8800f980
=>  Loading section .rdata, size 0x1e4d lma ffffffff8800f990
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117e0
=>  Loading section .data, size 0x458 lma ffffffff880117f8
=>  Start address ffffffff88000004
=>  Transfer rate: 582184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[393/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp57.exe
Result: invalid   
Time: 0:00:00.256499 sp57.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106f0
=>  Loading section .init, size 0x48 lma ffffffff88010760
=>  Loading section .fini, size 0x30 lma ffffffff880107a8
=>  Loading section .ctors, size 0x8 lma ffffffff880107d8
=>  Loading section .dtors, size 0x8 lma ffffffff880107e0
=>  Loading section .rdata, size 0x1ef1 lma ffffffff880107f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126e8
=>  Loading section .data, size 0x418 lma ffffffff88012700
=>  Start address ffffffff88000004
=>  Transfer rate: 612424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[394/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp58.exe
Result: invalid   
Time: 0:00:00.265968 sp58.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f630
=>  Loading section .init, size 0x48 lma ffffffff8800f6a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f6e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f718
=>  Loading section .dtors, size 0x8 lma ffffffff8800f720
=>  Loading section .rdata, size 0x1a45 lma ffffffff8800f730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011178
=>  Loading section .data, size 0x408 lma ffffffff88011190
=>  Start address ffffffff88000004
=>  Transfer rate: 568424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[395/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp59.exe
Result: invalid   
Time: 0:00:00.256724 sp59.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e60
=>  Loading section .init, size 0x48 lma ffffffff88010ed0
=>  Loading section .fini, size 0x30 lma ffffffff88010f18
=>  Loading section .ctors, size 0x8 lma ffffffff88010f48
=>  Loading section .dtors, size 0x8 lma ffffffff88010f50
=>  Loading section .rdata, size 0x2039 lma ffffffff88010f60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012fa0
=>  Loading section .data, size 0x448 lma ffffffff88012fb8
=>  Start address ffffffff88000004
=>  Transfer rate: 630664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[396/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:387 W:0   | mipstx39/jmr3904: sp60.exe
Result: invalid   
Time: 0:00:00.252933 sp60.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c10
=>  Loading section .init, size 0x48 lma ffffffff88010c80
=>  Loading section .fini, size 0x30 lma ffffffff88010cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88010d00
=>  Loading section .rdata, size 0x1f31 lma ffffffff88010d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c48
=>  Loading section .data, size 0x448 lma ffffffff88012c60
=>  Start address ffffffff88000004
=>  Transfer rate: 623816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[397/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp62.exe
Result: invalid   
Time: 0:00:00.252860 sp62.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ab0
=>  Loading section .init, size 0x48 lma ffffffff88011b20
=>  Loading section .fini, size 0x30 lma ffffffff88011b68
=>  Loading section .ctors, size 0x8 lma ffffffff88011b98
=>  Loading section .dtors, size 0x8 lma ffffffff88011ba0
=>  Loading section .rdata, size 0x2030 lma ffffffff88011bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013be0
=>  Loading section .data, size 0x454 lma ffffffff88013bf8
=>  Start address ffffffff88000004
=>  Transfer rate: 655904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[398/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp63.exe
Result: invalid   
Time: 0:00:00.795976 sp63.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf820 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f820
=>  Loading section .init, size 0x48 lma ffffffff8800f890
=>  Loading section .fini, size 0x30 lma ffffffff8800f8d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f908
=>  Loading section .dtors, size 0x8 lma ffffffff8800f910
=>  Loading section .rdata, size 0x1b05 lma ffffffff8800f920
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011428
=>  Loading section .data, size 0x408 lma ffffffff88011440
=>  Start address ffffffff88000004
=>  Transfer rate: 573928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[399/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp64.exe
Result: invalid   
Time: 0:00:00.746784 sp64.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107c0
=>  Loading section .init, size 0x48 lma ffffffff88010830
=>  Loading section .fini, size 0x30 lma ffffffff88010878
=>  Loading section .ctors, size 0x8 lma ffffffff880108a8
=>  Loading section .dtors, size 0x8 lma ffffffff880108b0
=>  Loading section .rdata, size 0x1b39 lma ffffffff880108c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012400
=>  Loading section .data, size 0x468 lma ffffffff88012418
=>  Start address ffffffff88000004
=>  Transfer rate: 607112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[400/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp65.exe
Result: invalid   
Time: 0:00:00.762796 sp65.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12230 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012230
=>  Loading section .init, size 0x48 lma ffffffff880122a0
=>  Loading section .fini, size 0x30 lma ffffffff880122e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012318
=>  Loading section .dtors, size 0x8 lma ffffffff88012320
=>  Loading section .rdata, size 0x1f08 lma ffffffff88012330
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014238
=>  Loading section .data, size 0x454 lma ffffffff88014250
=>  Start address ffffffff88000004
=>  Transfer rate: 668896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[401/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp66.exe
Result: invalid   
Time: 0:00:00.752274 sp66.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12230 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012230
=>  Loading section .init, size 0x48 lma ffffffff880122a0
=>  Loading section .fini, size 0x30 lma ffffffff880122e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012318
=>  Loading section .dtors, size 0x8 lma ffffffff88012320
=>  Loading section .rdata, size 0x1f10 lma ffffffff88012330
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014240
=>  Loading section .data, size 0x454 lma ffffffff88014258
=>  Start address ffffffff88000004
=>  Transfer rate: 668960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[402/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp67.exe
Result: invalid   
Time: 0:00:00.759530 sp67.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c70
=>  Loading section .init, size 0x48 lma ffffffff88010ce0
=>  Loading section .fini, size 0x30 lma ffffffff88010d28
=>  Loading section .ctors, size 0x8 lma ffffffff88010d58
=>  Loading section .dtors, size 0x8 lma ffffffff88010d60
=>  Loading section .rdata, size 0x1ee1 lma ffffffff88010d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c58
=>  Loading section .data, size 0x448 lma ffffffff88012c70
=>  Start address ffffffff88000004
=>  Transfer rate: 623944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[403/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp68.exe
Result: invalid   
Time: 0:00:00.742592 sp68.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013f50
=>  Loading section .init, size 0x48 lma ffffffff88013fd0
=>  Loading section .fini, size 0x30 lma ffffffff88014018
=>  Loading section .ctors, size 0x8 lma ffffffff88014048
=>  Loading section .dtors, size 0x8 lma ffffffff88014050
=>  Loading section .rdata, size 0x2295 lma ffffffff88014060
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880162f8
=>  Loading section .data, size 0x508 lma ffffffff88016310
=>  Start address ffffffff88000004
=>  Transfer rate: 737384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[404/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:395 W:0   | mipstx39/jmr3904: sp69.exe
Result: invalid   
Time: 0:00:00.737037 sp69.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11590 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011590
=>  Loading section .init, size 0x48 lma ffffffff88011600
=>  Loading section .fini, size 0x30 lma ffffffff88011648
=>  Loading section .ctors, size 0x8 lma ffffffff88011678
=>  Loading section .dtors, size 0x8 lma ffffffff88011680
=>  Loading section .rdata, size 0x2279 lma ffffffff88011690
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013910
=>  Loading section .data, size 0x448 lma ffffffff88013928
=>  Start address ffffffff88000004
=>  Transfer rate: 649992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[405/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp70.exe
Result: invalid   
Time: 0:00:00.271488 sp70.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10cc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010cc0
=>  Loading section .init, size 0x48 lma ffffffff88010d30
=>  Loading section .fini, size 0x30 lma ffffffff88010d78
=>  Loading section .ctors, size 0x8 lma ffffffff88010da8
=>  Loading section .dtors, size 0x8 lma ffffffff88010db0
=>  Loading section .rdata, size 0x1de0 lma ffffffff88010dc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ba0
=>  Loading section .data, size 0x418 lma ffffffff88012bb8
=>  Start address ffffffff88000004
=>  Transfer rate: 622144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[406/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp71.exe
Result: invalid   
Time: 0:00:00.260132 sp71.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb30
=>  Loading section .init, size 0x48 lma ffffffff8800fba0
=>  Loading section .fini, size 0x30 lma ffffffff8800fbe8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc18
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc20
=>  Loading section .rdata, size 0x1df0 lma ffffffff8800fc30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a20
=>  Loading section .data, size 0x438 lma ffffffff88011a38
=>  Start address ffffffff88000004
=>  Transfer rate: 586560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[407/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp72.exe
Result: invalid   
Time: 0:00:00.255215 sp72.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011270
=>  Loading section .init, size 0x48 lma ffffffff880112e0
=>  Loading section .fini, size 0x30 lma ffffffff88011328
=>  Loading section .ctors, size 0x8 lma ffffffff88011358
=>  Loading section .dtors, size 0x8 lma ffffffff88011360
=>  Loading section .rdata, size 0x1eb1 lma ffffffff88011370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013228
=>  Loading section .data, size 0x448 lma ffffffff88013240
=>  Start address ffffffff88000004
=>  Transfer rate: 635848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[408/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp73.exe
Result: invalid   
Time: 0:00:00.728367 sp73.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115f0
=>  Loading section .init, size 0x48 lma ffffffff88011660
=>  Loading section .fini, size 0x30 lma ffffffff880116a8
=>  Loading section .ctors, size 0x8 lma ffffffff880116d8
=>  Loading section .dtors, size 0x8 lma ffffffff880116e0
=>  Loading section .rdata, size 0x1fe0 lma ffffffff880116f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136d0
=>  Loading section .data, size 0x440 lma ffffffff880136e8
=>  Start address ffffffff88000004
=>  Transfer rate: 645376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[409/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp74.exe
Result: invalid   
Time: 0:00:00.262550 sp74.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f580
=>  Loading section .init, size 0x48 lma ffffffff8800f5f0
=>  Loading section .fini, size 0x30 lma ffffffff8800f638
=>  Loading section .ctors, size 0x8 lma ffffffff8800f668
=>  Loading section .dtors, size 0x8 lma ffffffff8800f670
=>  Loading section .rdata, size 0x1e1d lma ffffffff8800f680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880114a0
=>  Loading section .data, size 0x408 lma ffffffff880114b8
=>  Start address ffffffff88000004
=>  Transfer rate: 574888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[410/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp75.exe
Result: invalid   
Time: 0:00:00.260412 sp75.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010aa0
=>  Loading section .init, size 0x48 lma ffffffff88010b10
=>  Loading section .fini, size 0x30 lma ffffffff88010b58
=>  Loading section .ctors, size 0x8 lma ffffffff88010b88
=>  Loading section .dtors, size 0x8 lma ffffffff88010b90
=>  Loading section .rdata, size 0x1e09 lma ffffffff88010ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129b0
=>  Loading section .data, size 0x448 lma ffffffff880129c8
=>  Start address ffffffff88000004
=>  Transfer rate: 618504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[411/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp76.exe
Result: invalid   
Time: 0:00:00.742738 sp76.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfeb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800feb0
=>  Loading section .init, size 0x48 lma ffffffff8800ff20
=>  Loading section .fini, size 0x30 lma ffffffff8800ff68
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff98
=>  Loading section .dtors, size 0x8 lma ffffffff8800ffa0
=>  Loading section .rdata, size 0x1fd4 lma ffffffff8800ffb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f88
=>  Loading section .data, size 0x408 lma ffffffff88011fa0
=>  Start address ffffffff88000004
=>  Transfer rate: 597216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[412/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:403 W:0   | mipstx39/jmr3904: sp77.exe
Result: invalid   
Time: 0:00:00.730061 sp77.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=>  Loading section .init, size 0x48 lma ffffffff88010470
=>  Loading section .fini, size 0x30 lma ffffffff880104b8
=>  Loading section .ctors, size 0x8 lma ffffffff880104e8
=>  Loading section .dtors, size 0x8 lma ffffffff880104f0
=>  Loading section .rdata, size 0x1d05 lma ffffffff88010500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012208
=>  Loading section .data, size 0x448 lma ffffffff88012220
=>  Start address ffffffff88000004
=>  Transfer rate: 602856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[413/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spassoc01.exe
Result: invalid   
Time: 0:00:00.287964 spassoc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010fc0
=>  Loading section .init, size 0x48 lma ffffffff88011030
=>  Loading section .fini, size 0x30 lma ffffffff88011078
=>  Loading section .ctors, size 0x8 lma ffffffff880110a8
=>  Loading section .dtors, size 0x8 lma ffffffff880110b0
=>  Loading section .rdata, size 0x21b5 lma ffffffff880110c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013278
=>  Loading section .data, size 0x440 lma ffffffff88013290
=>  Start address ffffffff88000004
=>  Transfer rate: 636456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[414/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spatomic01.exe
Result: invalid   
Time: 0:00:00.255548 spatomic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff70
=>  Loading section .init, size 0x48 lma ffffffff8800ffe0
=>  Loading section .fini, size 0x30 lma ffffffff88010028
=>  Loading section .ctors, size 0x8 lma ffffffff88010058
=>  Loading section .dtors, size 0x8 lma ffffffff88010060
=>  Loading section .rdata, size 0x1d11 lma ffffffff88010070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d88
=>  Loading section .data, size 0x410 lma ffffffff88011da0
=>  Start address ffffffff88000004
=>  Transfer rate: 593160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[415/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spcache01.exe
Result: invalid   
Time: 0:00:00.276680 spcache01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012390
=>  Loading section .init, size 0x48 lma ffffffff88012400
=>  Loading section .fini, size 0x30 lma ffffffff88012448
=>  Loading section .ctors, size 0x8 lma ffffffff88012478
=>  Loading section .dtors, size 0x8 lma ffffffff88012480
=>  Loading section .rdata, size 0x2151 lma ffffffff88012490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880145e8
=>  Loading section .data, size 0x418 lma ffffffff88014600
=>  Start address ffffffff88000004
=>  Transfer rate: 675912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[416/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spcbssched01.exe
Result: invalid   
Time: 0:00:00.511744 spcbssched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b20
=>  Loading section .init, size 0x48 lma ffffffff88011b90
=>  Loading section .fini, size 0x30 lma ffffffff88011bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c08
=>  Loading section .dtors, size 0x8 lma ffffffff88011c10
=>  Loading section .rdata, size 0x20b4 lma ffffffff88011c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013cd8
=>  Loading section .data, size 0x5c0 lma ffffffff88013cf0
=>  Start address ffffffff88000004
=>  Transfer rate: 660768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[417/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spcbssched02.exe
Result: invalid   
Time: 0:00:00.260946 spcbssched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013530
=>  Loading section .init, size 0x48 lma ffffffff880135a0
=>  Loading section .fini, size 0x30 lma ffffffff880135e8
=>  Loading section .ctors, size 0x8 lma ffffffff88013618
=>  Loading section .dtors, size 0x8 lma ffffffff88013620
=>  Loading section .rdata, size 0x2691 lma ffffffff88013630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015cc8
=>  Loading section .data, size 0x454 lma ffffffff88015ce0
=>  Start address ffffffff88000004
=>  Transfer rate: 723240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[418/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spcbssched03.exe
Result: invalid   
Time: 0:00:00.274879 spcbssched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12fd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012fd0
=>  Loading section .init, size 0x48 lma ffffffff88013040
=>  Loading section .fini, size 0x30 lma ffffffff88013088
=>  Loading section .ctors, size 0x8 lma ffffffff880130b8
=>  Loading section .dtors, size 0x8 lma ffffffff880130c0
=>  Loading section .rdata, size 0x21e0 lma ffffffff880130d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880152b0
=>  Loading section .data, size 0x4bc lma ffffffff880152c8
=>  Start address ffffffff88000004
=>  Transfer rate: 703456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[419/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spchain.exe
Result: invalid   
Time: 0:00:00.258684 spchain.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x118b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880118b0
=>  Loading section .init, size 0x48 lma ffffffff88011920
=>  Loading section .fini, size 0x30 lma ffffffff88011968
=>  Loading section .ctors, size 0x8 lma ffffffff88011998
=>  Loading section .dtors, size 0x8 lma ffffffff880119a0
=>  Loading section .rdata, size 0x2151 lma ffffffff880119b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b08
=>  Loading section .data, size 0x438 lma ffffffff88013b20
=>  Start address ffffffff88000004
=>  Transfer rate: 653896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[420/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:411 W:0   | mipstx39/jmr3904: spclock_err01.exe
Result: invalid   
Time: 0:00:00.293825 spclock_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011e80
=>  Loading section .init, size 0x48 lma ffffffff88011ef0
=>  Loading section .fini, size 0x30 lma ffffffff88011f38
=>  Loading section .ctors, size 0x8 lma ffffffff88011f68
=>  Loading section .dtors, size 0x8 lma ffffffff88011f70
=>  Loading section .rdata, size 0x2439 lma ffffffff88011f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880143c0
=>  Loading section .data, size 0x440 lma ffffffff880143d8
=>  Start address ffffffff88000004
=>  Transfer rate: 671816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[421/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spclock_err02.exe
Result: invalid   
Time: 0:00:00.262217 spclock_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119b0
=>  Loading section .init, size 0x48 lma ffffffff88011a20
=>  Loading section .fini, size 0x30 lma ffffffff88011a68
=>  Loading section .ctors, size 0x8 lma ffffffff88011a98
=>  Loading section .dtors, size 0x8 lma ffffffff88011aa0
=>  Loading section .rdata, size 0x20c5 lma ffffffff88011ab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b78
=>  Loading section .data, size 0x440 lma ffffffff88013b90
=>  Start address ffffffff88000004
=>  Transfer rate: 654888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[422/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid   
Time: 0:00:00.257911 spclock_todhook01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016070
=>  Loading section .init, size 0x48 lma ffffffff880160e0
=>  Loading section .fini, size 0x30 lma ffffffff88016128
=>  Loading section .ctors, size 0x8 lma ffffffff88016158
=>  Loading section .dtors, size 0x8 lma ffffffff88016160
=>  Loading section .rdata, size 0x2628 lma ffffffff88016170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018798
=>  Loading section .data, size 0x7a0 lma ffffffff880187b0
=>  Start address ffffffff88000004
=>  Transfer rate: 817728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[423/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spconfig01.exe
Result: invalid   
Time: 0:00:00.255079 spconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f190
=>  Loading section .init, size 0x48 lma ffffffff8800f200
=>  Loading section .fini, size 0x30 lma ffffffff8800f248
=>  Loading section .ctors, size 0x8 lma ffffffff8800f278
=>  Loading section .dtors, size 0x8 lma ffffffff8800f280
=>  Loading section .rdata, size 0x1a15 lma ffffffff8800f290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ca8
=>  Loading section .data, size 0x49c lma ffffffff88010cc0
=>  Start address ffffffff88000004
=>  Transfer rate: 559752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[424/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spconfig02.exe
Result: invalid   
Time: 0:00:00.256999 spconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800c070
=>  Loading section .init, size 0x48 lma ffffffff8800c0f0
=>  Loading section .fini, size 0x30 lma ffffffff8800c138
=>  Loading section .ctors, size 0x8 lma ffffffff8800c168
=>  Loading section .dtors, size 0x8 lma ffffffff8800c170
=>  Loading section .rdata, size 0x15b0 lma ffffffff8800c180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d730
=>  Loading section .data, size 0x334 lma ffffffff8800d748
=>  Start address ffffffff88000004
=>  Transfer rate: 447392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[425/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spconsole01.exe
Result: invalid   
Time: 0:00:00.257066 spconsole01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e750
=>  Loading section .init, size 0x48 lma ffffffff8801e7c0
=>  Loading section .fini, size 0x30 lma ffffffff8801e808
=>  Loading section .ctors, size 0x8 lma ffffffff8801e838
=>  Loading section .dtors, size 0x8 lma ffffffff8801e840
=>  Loading section .rdata, size 0x240c lma ffffffff8801e850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020c60
=>  Loading section .data, size 0x5ec lma ffffffff88020c78
=>  Start address ffffffff88000004
=>  Transfer rate: 1086144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[426/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spcontext01.exe
Result: invalid   
Time: 0:00:00.257517 spcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113b0
=>  Loading section .init, size 0x48 lma ffffffff88011420
=>  Loading section .fini, size 0x30 lma ffffffff88011468
=>  Loading section .ctors, size 0x8 lma ffffffff88011498
=>  Loading section .dtors, size 0x8 lma ffffffff880114a0
=>  Loading section .rdata, size 0x1a49 lma ffffffff880114b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f00
=>  Loading section .data, size 0x448 lma ffffffff88012f18
=>  Start address ffffffff88000004
=>  Transfer rate: 629384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[427/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid   
Time: 0:00:00.253628 spcpucounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18c20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018c20
=>  Loading section .init, size 0x48 lma ffffffff88018c90
=>  Loading section .fini, size 0x30 lma ffffffff88018cd8
=>  Loading section .ctors, size 0x8 lma ffffffff88018d08
=>  Loading section .dtors, size 0x8 lma ffffffff88018d10
=>  Loading section .rdata, size 0x22a0 lma ffffffff88018d20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801afc0
=>  Loading section .data, size 0x5b8 lma ffffffff8801afd8
=>  Start address ffffffff88000004
=>  Transfer rate: 896064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[428/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:419 W:0   | mipstx39/jmr3904: spcpuset01.exe
Result: invalid   
Time: 0:00:00.255002 spcpuset01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfaa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800faa0
=>  Loading section .init, size 0x48 lma ffffffff8800fb10
=>  Loading section .fini, size 0x30 lma ffffffff8800fb58
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb88
=>  Loading section .dtors, size 0x8 lma ffffffff8800fb90
=>  Loading section .rdata, size 0x1b55 lma ffffffff8800fba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116f8
=>  Loading section .data, size 0x408 lma ffffffff88011710
=>  Start address ffffffff88000004
=>  Transfer rate: 579688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[429/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: spcxx01.exe
Result: invalid   
Time: 0:00:00.255680 spcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x31fb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88031fb0
=>  Loading section .init, size 0x48 lma ffffffff88032030
=>  Loading section .fini, size 0x30 lma ffffffff88032078
=>  Loading section .ctors, size 0x24 lma ffffffff880320a8
=>  Loading section .dtors, size 0x8 lma ffffffff880320cc
=>  Loading section .rdata, size 0x543c lma ffffffff880320e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88037520
=>  Loading section .rel.dyn, size 0x20 lma ffffffff88037538
=>  Loading section .data, size 0x6c4 lma ffffffff88037558
=>  Loading section .sdata, size 0x4 lma ffffffff88037c20
=>  Start address ffffffff88000004
=>  Transfer rate: 1826944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[430/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: spedfsched01.exe
Result: invalid   
Time: 0:00:00.259086 spedfsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119a0
=>  Loading section .init, size 0x48 lma ffffffff88011a10
=>  Loading section .fini, size 0x30 lma ffffffff88011a58
=>  Loading section .ctors, size 0x8 lma ffffffff88011a88
=>  Loading section .dtors, size 0x8 lma ffffffff88011a90
=>  Loading section .rdata, size 0x20b4 lma ffffffff88011aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b58
=>  Loading section .data, size 0x5c0 lma ffffffff88013b70
=>  Start address ffffffff88000004
=>  Transfer rate: 657696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[431/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: spedfsched02.exe
Result: invalid   
Time: 0:00:00.269825 spedfsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012c40
=>  Loading section .init, size 0x48 lma ffffffff88012cb0
=>  Loading section .fini, size 0x30 lma ffffffff88012cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88012d28
=>  Loading section .dtors, size 0x8 lma ffffffff88012d30
=>  Loading section .rdata, size 0x219c lma ffffffff88012d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ee0
=>  Loading section .data, size 0x4a4 lma ffffffff88014ef8
=>  Start address ffffffff88000004
=>  Transfer rate: 695424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[432/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: spedfsched03.exe
Result: invalid   
Time: 0:00:00.272674 spedfsched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012650
=>  Loading section .init, size 0x48 lma ffffffff880126c0
=>  Loading section .fini, size 0x30 lma ffffffff88012708
=>  Loading section .ctors, size 0x8 lma ffffffff88012738
=>  Loading section .dtors, size 0x8 lma ffffffff88012740
=>  Loading section .rdata, size 0x20c8 lma ffffffff88012750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014818
=>  Loading section .data, size 0x4bc lma ffffffff88014830
=>  Start address ffffffff88000004
=>  Transfer rate: 681760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[433/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: spedfsched04.exe
Result: invalid   
Time: 0:00:00.260962 spedfsched04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11710 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011710
=>  Loading section .init, size 0x48 lma ffffffff88011780
=>  Loading section .fini, size 0x30 lma ffffffff880117c8
=>  Loading section .ctors, size 0x8 lma ffffffff880117f8
=>  Loading section .dtors, size 0x8 lma ffffffff88011800
=>  Loading section .rdata, size 0x1f61 lma ffffffff88011810
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013778
=>  Loading section .data, size 0x448 lma ffffffff88013790
=>  Start address ffffffff88000004
=>  Transfer rate: 646728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[434/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: sperror01.exe
Result: invalid   
Time: 0:00:00.270552 sperror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x196a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880196a0
=>  Loading section .init, size 0x48 lma ffffffff88019710
=>  Loading section .fini, size 0x30 lma ffffffff88019758
=>  Loading section .ctors, size 0x8 lma ffffffff88019788
=>  Loading section .dtors, size 0x8 lma ffffffff88019790
=>  Loading section .rdata, size 0x2f0c lma ffffffff880197a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c6b0
=>  Loading section .data, size 0x59c lma ffffffff8801c6c8
=>  Start address ffffffff88000004
=>  Transfer rate: 942784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[435/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: sperror02.exe
Result: invalid   
Time: 0:00:00.263041 sperror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019620
=>  Loading section .init, size 0x48 lma ffffffff88019690
=>  Loading section .fini, size 0x30 lma ffffffff880196d8
=>  Loading section .ctors, size 0x8 lma ffffffff88019708
=>  Loading section .dtors, size 0x8 lma ffffffff88019710
=>  Loading section .rdata, size 0x2e84 lma ffffffff88019720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c5a8
=>  Loading section .data, size 0x59c lma ffffffff8801c5c0
=>  Start address ffffffff88000004
=>  Transfer rate: 940672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[436/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:427 W:0   | mipstx39/jmr3904: sperror03.exe
Result: invalid   
Time: 0:00:00.255842 sperror03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe90
=>  Loading section .init, size 0x48 lma ffffffff8800ff00
=>  Loading section .fini, size 0x30 lma ffffffff8800ff48
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff78
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff80
=>  Loading section .rdata, size 0x19bd lma ffffffff8800ff90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011950
=>  Loading section .data, size 0x418 lma ffffffff88011968
=>  Start address ffffffff88000004
=>  Transfer rate: 584616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[437/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: spevent_err03.exe
Result: invalid   
Time: 0:00:00.265511 spevent_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017a50
=>  Loading section .init, size 0x48 lma ffffffff88017ac0
=>  Loading section .fini, size 0x30 lma ffffffff88017b08
=>  Loading section .ctors, size 0x8 lma ffffffff88017b38
=>  Loading section .dtors, size 0x8 lma ffffffff88017b40
=>  Loading section .rdata, size 0x2934 lma ffffffff88017b50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a488
=>  Loading section .data, size 0x610 lma ffffffff8801a4a0
=>  Start address ffffffff88000004
=>  Transfer rate: 873760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[438/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: speventsystem01.exe
Result: invalid   
Time: 0:00:00.253991 speventsystem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=>  Loading section .init, size 0x48 lma ffffffff88010710
=>  Loading section .fini, size 0x30 lma ffffffff88010758
=>  Loading section .ctors, size 0x8 lma ffffffff88010788
=>  Loading section .dtors, size 0x8 lma ffffffff88010790
=>  Loading section .rdata, size 0x1a65 lma ffffffff880107a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012208
=>  Loading section .data, size 0x418 lma ffffffff88012220
=>  Start address ffffffff88000004
=>  Transfer rate: 602472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[439/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: speventtransient01.exe
Result: invalid   
Time: 0:00:00.261656 speventtransient01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105d0
=>  Loading section .init, size 0x48 lma ffffffff88010640
=>  Loading section .fini, size 0x30 lma ffffffff88010688
=>  Loading section .ctors, size 0x8 lma ffffffff880106b8
=>  Loading section .dtors, size 0x8 lma ffffffff880106c0
=>  Loading section .rdata, size 0x1a29 lma ffffffff880106d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012100
=>  Loading section .data, size 0x418 lma ffffffff88012118
=>  Start address ffffffff88000004
=>  Transfer rate: 600328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[440/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: spextensions01.exe
Result: invalid   
Time: 0:00:00.261922 spextensions01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ed0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ed0
=>  Loading section .init, size 0x48 lma ffffffff88011f40
=>  Loading section .fini, size 0x30 lma ffffffff88011f88
=>  Loading section .ctors, size 0x8 lma ffffffff88011fb8
=>  Loading section .dtors, size 0x8 lma ffffffff88011fc0
=>  Loading section .rdata, size 0x1d55 lma ffffffff88011fd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d28
=>  Loading section .data, size 0x448 lma ffffffff88013d40
=>  Start address ffffffff88000004
=>  Transfer rate: 658408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[441/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: spfatal01.exe
Result: invalid   
Time: 0:00:00.257957 spfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffe0
=>  Loading section .init, size 0x48 lma ffffffff88010050
=>  Loading section .fini, size 0x30 lma ffffffff88010098
=>  Loading section .ctors, size 0x8 lma ffffffff880100c8
=>  Loading section .dtors, size 0x8 lma ffffffff880100d0
=>  Loading section .rdata, size 0x1dd8 lma ffffffff880100e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011eb8
=>  Loading section .data, size 0x418 lma ffffffff88011ed0
=>  Start address ffffffff88000004
=>  Transfer rate: 595712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[442/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: spfatal03.exe
Result: invalid   
Time: 0:00:00.255498 spfatal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c80
=>  Loading section .init, size 0x48 lma ffffffff88010cf0
=>  Loading section .fini, size 0x30 lma ffffffff88010d38
=>  Loading section .ctors, size 0x8 lma ffffffff88010d68
=>  Loading section .dtors, size 0x8 lma ffffffff88010d70
=>  Loading section .rdata, size 0x1f55 lma ffffffff88010d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cd8
=>  Loading section .data, size 0x448 lma ffffffff88012cf0
=>  Start address ffffffff88000004
=>  Transfer rate: 625000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[443/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: spfatal04.exe
Result: invalid   
Time: 0:00:00.259379 spfatal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10090 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010090
=>  Loading section .init, size 0x48 lma ffffffff88010100
=>  Loading section .fini, size 0x30 lma ffffffff88010148
=>  Loading section .ctors, size 0x8 lma ffffffff88010178
=>  Loading section .dtors, size 0x8 lma ffffffff88010180
=>  Loading section .rdata, size 0x1dcd lma ffffffff88010190
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f60
=>  Loading section .data, size 0x418 lma ffffffff88011f78
=>  Start address ffffffff88000004
=>  Transfer rate: 597032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[444/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:435 W:0   | mipstx39/jmr3904: spfatal05.exe
Result: invalid   
Time: 0:00:00.258435 spfatal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010370
=>  Loading section .init, size 0x48 lma ffffffff880103e0
=>  Loading section .fini, size 0x30 lma ffffffff88010428
=>  Loading section .ctors, size 0x8 lma ffffffff88010458
=>  Loading section .dtors, size 0x8 lma ffffffff88010460
=>  Loading section .rdata, size 0x1f0d lma ffffffff88010470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012380
=>  Loading section .data, size 0x418 lma ffffffff88012398
=>  Start address ffffffff88000004
=>  Transfer rate: 605480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[445/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal09.exe
Result: invalid   
Time: 0:00:00.258736 spfatal09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010160
=>  Loading section .init, size 0x48 lma ffffffff880101d0
=>  Loading section .fini, size 0x30 lma ffffffff88010218
=>  Loading section .ctors, size 0x8 lma ffffffff88010248
=>  Loading section .dtors, size 0x8 lma ffffffff88010250
=>  Loading section .rdata, size 0x1ddd lma ffffffff88010260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012040
=>  Loading section .data, size 0x418 lma ffffffff88012058
=>  Start address ffffffff88000004
=>  Transfer rate: 598824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[446/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal10.exe
Result: invalid   
Time: 0:00:00.255397 spfatal10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10030 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010030
=>  Loading section .init, size 0x48 lma ffffffff880100a0
=>  Loading section .fini, size 0x30 lma ffffffff880100e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010118
=>  Loading section .dtors, size 0x8 lma ffffffff88010120
=>  Loading section .rdata, size 0x1ac9 lma ffffffff88010130
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c00
=>  Loading section .data, size 0x418 lma ffffffff88011c18
=>  Start address ffffffff88000004
=>  Transfer rate: 590088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[447/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal11.exe
Result: invalid   
Time: 0:00:00.260303 spfatal11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10020 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010020
=>  Loading section .init, size 0x48 lma ffffffff88010090
=>  Loading section .fini, size 0x30 lma ffffffff880100d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010108
=>  Loading section .dtors, size 0x8 lma ffffffff88010110
=>  Loading section .rdata, size 0x1ab9 lma ffffffff88010120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011be0
=>  Loading section .data, size 0x418 lma ffffffff88011bf8
=>  Start address ffffffff88000004
=>  Transfer rate: 589832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[448/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal12.exe
Result: invalid   
Time: 0:00:00.266307 spfatal12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010160
=>  Loading section .init, size 0x48 lma ffffffff880101d0
=>  Loading section .fini, size 0x30 lma ffffffff88010218
=>  Loading section .ctors, size 0x8 lma ffffffff88010248
=>  Loading section .dtors, size 0x8 lma ffffffff88010250
=>  Loading section .rdata, size 0x1df5 lma ffffffff88010260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012058
=>  Loading section .data, size 0x418 lma ffffffff88012070
=>  Start address ffffffff88000004
=>  Transfer rate: 599016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[449/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal14.exe
Result: invalid   
Time: 0:00:00.255486 spfatal14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010100
=>  Loading section .init, size 0x48 lma ffffffff88010170
=>  Loading section .fini, size 0x30 lma ffffffff880101b8
=>  Loading section .ctors, size 0x8 lma ffffffff880101e8
=>  Loading section .dtors, size 0x8 lma ffffffff880101f0
=>  Loading section .rdata, size 0x1dd5 lma ffffffff88010200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fd8
=>  Loading section .data, size 0x418 lma ffffffff88011ff0
=>  Start address ffffffff88000004
=>  Transfer rate: 597992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[450/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal15.exe
Result: invalid   
Time: 0:00:00.257067 spfatal15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010100
=>  Loading section .init, size 0x48 lma ffffffff88010170
=>  Loading section .fini, size 0x30 lma ffffffff880101b8
=>  Loading section .ctors, size 0x8 lma ffffffff880101e8
=>  Loading section .dtors, size 0x8 lma ffffffff880101f0
=>  Loading section .rdata, size 0x1dd5 lma ffffffff88010200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fd8
=>  Loading section .data, size 0x418 lma ffffffff88011ff0
=>  Start address ffffffff88000004
=>  Transfer rate: 597992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[451/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal28.exe
Result: invalid   
Time: 0:00:00.257749 spfatal28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100d0
=>  Loading section .init, size 0x48 lma ffffffff88010140
=>  Loading section .fini, size 0x30 lma ffffffff88010188
=>  Loading section .ctors, size 0x8 lma ffffffff880101b8
=>  Loading section .dtors, size 0x8 lma ffffffff880101c0
=>  Loading section .rdata, size 0x1dcd lma ffffffff880101d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fa0
=>  Loading section .data, size 0x418 lma ffffffff88011fb8
=>  Start address ffffffff88000004
=>  Transfer rate: 597544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[452/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:443 W:0   | mipstx39/jmr3904: spfatal29.exe
Result: invalid   
Time: 0:00:00.279308 spfatal29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10560 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010560
=>  Loading section .init, size 0x48 lma ffffffff880105d0
=>  Loading section .fini, size 0x30 lma ffffffff88010618
=>  Loading section .ctors, size 0x8 lma ffffffff88010648
=>  Loading section .dtors, size 0x8 lma ffffffff88010650
=>  Loading section .rdata, size 0x1e15 lma ffffffff88010660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012478
=>  Loading section .data, size 0x448 lma ffffffff88012490
=>  Start address ffffffff88000004
=>  Transfer rate: 607848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[453/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfatal30.exe
Result: invalid   
Time: 0:00:00.257578 spfatal30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe320 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800e320
=>  Loading section .init, size 0x48 lma ffffffff8800e380
=>  Loading section .fini, size 0x30 lma ffffffff8800e3c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800e3f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800e400
=>  Loading section .rdata, size 0x188d lma ffffffff8800e410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800fca0
=>  Loading section .data, size 0x3cc lma ffffffff8800fcb8
=>  Start address ffffffff88000004
=>  Transfer rate: 525256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[454/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfatal31.exe
Result: invalid   
Time: 0:00:00.259821 spfatal31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf500 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f500
=>  Loading section .init, size 0x48 lma ffffffff8800f570
=>  Loading section .fini, size 0x30 lma ffffffff8800f5b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f5e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f5f0
=>  Loading section .rdata, size 0x18f5 lma ffffffff8800f600
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ef8
=>  Loading section .data, size 0x414 lma ffffffff88010f10
=>  Start address ffffffff88000004
=>  Transfer rate: 563400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[455/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfatal32.exe
Result: invalid   
Time: 0:00:00.257924 spfatal32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010130
=>  Loading section .init, size 0x48 lma ffffffff880101a0
=>  Loading section .fini, size 0x30 lma ffffffff880101e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010218
=>  Loading section .dtors, size 0x8 lma ffffffff88010220
=>  Loading section .rdata, size 0x1ddd lma ffffffff88010230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012010
=>  Loading section .data, size 0x418 lma ffffffff88012028
=>  Start address ffffffff88000004
=>  Transfer rate: 598440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[456/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfatal33.exe
Result: invalid   
Time: 0:00:00.255551 spfatal33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010180
=>  Loading section .init, size 0x48 lma ffffffff880101f0
=>  Loading section .fini, size 0x30 lma ffffffff88010238
=>  Loading section .ctors, size 0x8 lma ffffffff88010268
=>  Loading section .dtors, size 0x8 lma ffffffff88010270
=>  Loading section .rdata, size 0x1dfd lma ffffffff88010280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012080
=>  Loading section .data, size 0x418 lma ffffffff88012098
=>  Start address ffffffff88000004
=>  Transfer rate: 599336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[457/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfatal34.exe
Result: invalid   
Time: 0:00:00.256778 spfatal34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff10
=>  Loading section .init, size 0x48 lma ffffffff8800ff80
=>  Loading section .fini, size 0x30 lma ffffffff8800ffc8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fff8
=>  Loading section .dtors, size 0x8 lma ffffffff88010000
=>  Loading section .rdata, size 0x1dc0 lma ffffffff88010010
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011dd0
=>  Loading section .data, size 0x418 lma ffffffff88011de8
=>  Start address ffffffff88000004
=>  Transfer rate: 593856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[458/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfifo01.exe
Result: invalid   
Time: 0:00:00.257749 spfifo01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f410
=>  Loading section .init, size 0x48 lma ffffffff8800f480
=>  Loading section .fini, size 0x30 lma ffffffff8800f4c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f4f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f500
=>  Loading section .rdata, size 0x1a69 lma ffffffff8800f510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f80
=>  Loading section .data, size 0x408 lma ffffffff88010f98
=>  Start address ffffffff88000004
=>  Transfer rate: 564360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[459/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfifo02.exe
Result: invalid   
Time: 0:00:00.252153 spfifo02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12660 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012660
=>  Loading section .init, size 0x48 lma ffffffff880126d0
=>  Loading section .fini, size 0x30 lma ffffffff88012718
=>  Loading section .ctors, size 0x8 lma ffffffff88012748
=>  Loading section .dtors, size 0x8 lma ffffffff88012750
=>  Loading section .rdata, size 0x2674 lma ffffffff88012760
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014dd8
=>  Loading section .data, size 0x440 lma ffffffff88014df0
=>  Start address ffffffff88000004
=>  Transfer rate: 692512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[460/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:451 W:0   | mipstx39/jmr3904: spfifo03.exe
Result: invalid   
Time: 0:00:00.255346 spfifo03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013b50
=>  Loading section .init, size 0x48 lma ffffffff88013bd0
=>  Loading section .fini, size 0x30 lma ffffffff88013c18
=>  Loading section .ctors, size 0x8 lma ffffffff88013c48
=>  Loading section .dtors, size 0x8 lma ffffffff88013c50
=>  Loading section .rdata, size 0x27d0 lma ffffffff88013c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016430
=>  Loading section .data, size 0x47c lma ffffffff88016448
=>  Start address ffffffff88000004
=>  Transfer rate: 738784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[461/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spfifo04.exe
Result: invalid   
Time: 0:00:00.258761 spfifo04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12510 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012510
=>  Loading section .init, size 0x48 lma ffffffff88012580
=>  Loading section .fini, size 0x30 lma ffffffff880125c8
=>  Loading section .ctors, size 0x8 lma ffffffff880125f8
=>  Loading section .dtors, size 0x8 lma ffffffff88012600
=>  Loading section .rdata, size 0x1dc5 lma ffffffff88012610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880143d8
=>  Loading section .data, size 0x438 lma ffffffff880143f0
=>  Start address ffffffff88000004
=>  Transfer rate: 671976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[462/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spfifo05.exe
Result: invalid   
Time: 0:00:00.255987 spfifo05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x129e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880129e0
=>  Loading section .init, size 0x48 lma ffffffff88012a50
=>  Loading section .fini, size 0x30 lma ffffffff88012a98
=>  Loading section .ctors, size 0x8 lma ffffffff88012ac8
=>  Loading section .dtors, size 0x8 lma ffffffff88012ad0
=>  Loading section .rdata, size 0x28f4 lma ffffffff88012ae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880153d8
=>  Loading section .data, size 0x460 lma ffffffff880153f0
=>  Start address ffffffff88000004
=>  Transfer rate: 705056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[463/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spfreechain01.exe
Result: invalid   
Time: 0:00:00.254556 spfreechain01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f600
=>  Loading section .init, size 0x48 lma ffffffff8800f670
=>  Loading section .fini, size 0x30 lma ffffffff8800f6b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f6e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f6f0
=>  Loading section .rdata, size 0x1b75 lma ffffffff8800f700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011278
=>  Loading section .data, size 0x408 lma ffffffff88011290
=>  Start address ffffffff88000004
=>  Transfer rate: 570472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[464/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid   
Time: 0:00:00.255242 spglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe9a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800e9a0
=>  Loading section .init, size 0x48 lma ffffffff8800ea00
=>  Loading section .fini, size 0x30 lma ffffffff8800ea48
=>  Loading section .ctors, size 0xc lma ffffffff8800ea78
=>  Loading section .dtors, size 0x8 lma ffffffff8800ea84
=>  Loading section .rdata, size 0x198c lma ffffffff8800ea90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010420
=>  Loading section .data, size 0x390 lma ffffffff88010438
=>  Start address ffffffff88000004
=>  Transfer rate: 540160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[465/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid   
Time: 0:00:00.254351 spglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103a0
=>  Loading section .init, size 0x48 lma ffffffff88010410
=>  Loading section .fini, size 0x30 lma ffffffff88010458
=>  Loading section .ctors, size 0x18 lma ffffffff88010488
=>  Loading section .dtors, size 0x18 lma ffffffff880104a0
=>  Loading section .rdata, size 0x1a39 lma ffffffff880104c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f00
=>  Loading section .data, size 0x418 lma ffffffff88011f18
=>  Start address ffffffff88000004
=>  Transfer rate: 596232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[466/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spheapprot.exe
Result: invalid   
Time: 0:00:00.260187 spheapprot.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf480 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f480
=>  Loading section .init, size 0x48 lma ffffffff8800f4f0
=>  Loading section .fini, size 0x30 lma ffffffff8800f538
=>  Loading section .ctors, size 0x8 lma ffffffff8800f568
=>  Loading section .dtors, size 0x8 lma ffffffff8800f570
=>  Loading section .rdata, size 0x197d lma ffffffff8800f580
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f00
=>  Loading section .data, size 0x408 lma ffffffff88010f18
=>  Start address ffffffff88000004
=>  Transfer rate: 563368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[467/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid   
Time: 0:00:00.262548 spinternalerror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3ec0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x50 lma ffffffff88003ec0
=>  Loading section .init, size 0x48 lma ffffffff88003f10
=>  Loading section .fini, size 0x30 lma ffffffff88003f58
=>  Loading section .ctors, size 0x8 lma ffffffff88003f88
=>  Loading section .dtors, size 0x8 lma ffffffff88003f90
=>  Loading section .rdata, size 0x1434 lma ffffffff88003fa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880053d8
=>  Loading section .data, size 0x7c lma ffffffff880053f0
=>  Start address ffffffff88000004
=>  Transfer rate: 172800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[468/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:459 W:0   | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid   
Time: 0:00:00.264428 spinternalerror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f430
=>  Loading section .init, size 0x48 lma ffffffff8800f4a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f4e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f518
=>  Loading section .dtors, size 0x8 lma ffffffff8800f520
=>  Loading section .rdata, size 0x1d61 lma ffffffff8800f530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011298
=>  Loading section .data, size 0x408 lma ffffffff880112b0
=>  Start address ffffffff88000004
=>  Transfer rate: 570696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[469/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spintr_err01.exe
Result: invalid   
Time: 0:00:00.266108 spintr_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfeb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800feb0
=>  Loading section .init, size 0x48 lma ffffffff8800ff20
=>  Loading section .fini, size 0x30 lma ffffffff8800ff68
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff98
=>  Loading section .dtors, size 0x8 lma ffffffff8800ffa0
=>  Loading section .rdata, size 0x1a0d lma ffffffff8800ffb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119c0
=>  Loading section .data, size 0x418 lma ffffffff880119d8
=>  Start address ffffffff88000004
=>  Transfer rate: 585512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[470/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: splinkersets01.exe
Result: invalid   
Time: 0:00:00.253154 splinkersets01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xa0 lma ffffffff8800fb40
=>  Loading section .init, size 0x48 lma ffffffff8800fbe0
=>  Loading section .fini, size 0x30 lma ffffffff8800fc28
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc58
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc60
=>  Loading section .rdata, size 0x2215 lma ffffffff8800fc70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e88
=>  Loading section .data, size 0x408 lma ffffffff88011ea0
=>  Loading section .rtemsrwset, size 0x34 lma ffffffff880122a8
=>  Start address ffffffff88000004
=>  Transfer rate: 595592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[471/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spmisc01.exe
Result: invalid   
Time: 0:00:00.259886 spmisc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf490 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f490
=>  Loading section .init, size 0x48 lma ffffffff8800f500
=>  Loading section .fini, size 0x30 lma ffffffff8800f548
=>  Loading section .ctors, size 0x8 lma ffffffff8800f578
=>  Loading section .dtors, size 0x8 lma ffffffff8800f580
=>  Loading section .rdata, size 0x1add lma ffffffff8800f590
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011070
=>  Loading section .data, size 0x408 lma ffffffff88011088
=>  Start address ffffffff88000004
=>  Transfer rate: 566312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[472/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spmkdir.exe
Result: invalid   
Time: 0:00:00.256841 spmkdir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbe0
=>  Loading section .init, size 0x48 lma ffffffff8800fc50
=>  Loading section .fini, size 0x30 lma ffffffff8800fc98
=>  Loading section .ctors, size 0x8 lma ffffffff8800fcc8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fcd0
=>  Loading section .rdata, size 0x1c25 lma ffffffff8800fce0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011908
=>  Loading section .data, size 0x408 lma ffffffff88011920
=>  Start address ffffffff88000004
=>  Transfer rate: 583912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[473/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid   
Time: 0:00:00.264105 spmountmgr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010060
=>  Loading section .init, size 0x48 lma ffffffff880100d0
=>  Loading section .fini, size 0x30 lma ffffffff88010118
=>  Loading section .ctors, size 0x8 lma ffffffff88010148
=>  Loading section .dtors, size 0x8 lma ffffffff88010150
=>  Loading section .rdata, size 0x1ccd lma ffffffff88010160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e30
=>  Loading section .data, size 0x408 lma ffffffff88011e48
=>  Start address ffffffff88000004
=>  Transfer rate: 594472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[474/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spmrsp01.exe
Result: invalid   
Time: 0:00:00.254477 spmrsp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12740 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012740
=>  Loading section .init, size 0x48 lma ffffffff880127b0
=>  Loading section .fini, size 0x30 lma ffffffff880127f8
=>  Loading section .ctors, size 0x8 lma ffffffff88012828
=>  Loading section .dtors, size 0x8 lma ffffffff88012830
=>  Loading section .rdata, size 0x1c49 lma ffffffff88012840
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014490
=>  Loading section .data, size 0x478 lma ffffffff880144a8
=>  Start address ffffffff88000004
=>  Transfer rate: 673928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[475/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid   
Time: 0:00:00.266450 spmsgq_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012450
=>  Loading section .init, size 0x48 lma ffffffff880124c0
=>  Loading section .fini, size 0x30 lma ffffffff88012508
=>  Loading section .ctors, size 0x8 lma ffffffff88012538
=>  Loading section .dtors, size 0x8 lma ffffffff88012540
=>  Loading section .rdata, size 0x2a91 lma ffffffff88012550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fe8
=>  Loading section .data, size 0x448 lma ffffffff88015000
=>  Start address ffffffff88000004
=>  Transfer rate: 696776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[476/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:467 W:0   | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid   
Time: 0:00:00.256656 spmsgq_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119b0
=>  Loading section .init, size 0x48 lma ffffffff88011a20
=>  Loading section .fini, size 0x30 lma ffffffff88011a68
=>  Loading section .ctors, size 0x8 lma ffffffff88011a98
=>  Loading section .dtors, size 0x8 lma ffffffff88011aa0
=>  Loading section .rdata, size 0x22a5 lma ffffffff88011ab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d58
=>  Loading section .data, size 0x448 lma ffffffff88013d70
=>  Start address ffffffff88000004
=>  Transfer rate: 658792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[477/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: spmutex01.exe
Result: invalid   
Time: 0:00:00.273941 spmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014150
=>  Loading section .init, size 0x48 lma ffffffff880141c0
=>  Loading section .fini, size 0x30 lma ffffffff88014208
=>  Loading section .ctors, size 0x8 lma ffffffff88014238
=>  Loading section .dtors, size 0x8 lma ffffffff88014240
=>  Loading section .rdata, size 0x1be9 lma ffffffff88014250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015e40
=>  Loading section .data, size 0x478 lma ffffffff88015e58
=>  Start address ffffffff88000004
=>  Transfer rate: 726536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[478/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: spnsext01.exe
Result: invalid   
Time: 0:00:00.255587 spnsext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10300 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010300
=>  Loading section .init, size 0x48 lma ffffffff88010370
=>  Loading section .fini, size 0x30 lma ffffffff880103b8
=>  Loading section .ctors, size 0x8 lma ffffffff880103e8
=>  Loading section .dtors, size 0x8 lma ffffffff880103f0
=>  Loading section .rdata, size 0x1a09 lma ffffffff88010400
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e10
=>  Loading section .data, size 0x418 lma ffffffff88011e28
=>  Start address ffffffff88000004
=>  Transfer rate: 594312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[479/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: spntp01.exe
Result: invalid   
Time: 0:00:00.272236 spntp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x167f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880167f0
=>  Loading section .init, size 0x48 lma ffffffff88016870
=>  Loading section .fini, size 0x30 lma ffffffff880168b8
=>  Loading section .ctors, size 0x8 lma ffffffff880168e8
=>  Loading section .dtors, size 0x8 lma ffffffff880168f0
=>  Loading section .rdata, size 0x2340 lma ffffffff88016900
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018c40
=>  Loading section .data, size 0x460 lma ffffffff88018c58
=>  Start address ffffffff88000004
=>  Transfer rate: 820608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[480/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid   
Time: 0:00:00.260656 spobjgetnext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010270
=>  Loading section .init, size 0x48 lma ffffffff880102e0
=>  Loading section .fini, size 0x30 lma ffffffff88010328
=>  Loading section .ctors, size 0x8 lma ffffffff88010358
=>  Loading section .dtors, size 0x8 lma ffffffff88010360
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e00
=>  Loading section .data, size 0x418 lma ffffffff88011e18
=>  Start address ffffffff88000004
=>  Transfer rate: 594184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[481/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: sppagesize.exe
Result: invalid   
Time: 0:00:00.272429 sppagesize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f310
=>  Loading section .init, size 0x48 lma ffffffff8800f380
=>  Loading section .fini, size 0x30 lma ffffffff8800f3c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f3f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f400
=>  Loading section .rdata, size 0x19d5 lma ffffffff8800f410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010de8
=>  Loading section .data, size 0x408 lma ffffffff88010e00
=>  Start address ffffffff88000004
=>  Transfer rate: 561128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[482/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid   
Time: 0:00:00.258054 sppartition_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111b0
=>  Loading section .init, size 0x48 lma ffffffff88011220
=>  Loading section .fini, size 0x30 lma ffffffff88011268
=>  Loading section .ctors, size 0x8 lma ffffffff88011298
=>  Loading section .dtors, size 0x8 lma ffffffff880112a0
=>  Loading section .rdata, size 0x259d lma ffffffff880112b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013850
=>  Loading section .data, size 0x448 lma ffffffff88013868
=>  Start address ffffffff88000004
=>  Transfer rate: 648488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[483/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid   
Time: 0:00:00.266430 sppercpudata01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb70
=>  Loading section .init, size 0x48 lma ffffffff8800fbe0
=>  Loading section .fini, size 0x30 lma ffffffff8800fc28
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc58
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc60
=>  Loading section .rdata, size 0x1b45 lma ffffffff8800fc70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117b8
=>  Loading section .data, size 0x408 lma ffffffff880117d0
=>  Loading section .rtemsrwset, size 0x4c lma ffffffff88011bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 581832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[484/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:475 W:0   | mipstx39/jmr3904: spport_err01.exe
Result: invalid   
Time: 0:00:00.253916 spport_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109d0
=>  Loading section .init, size 0x48 lma ffffffff88010a40
=>  Loading section .fini, size 0x30 lma ffffffff88010a88
=>  Loading section .ctors, size 0x8 lma ffffffff88010ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ac0
=>  Loading section .rdata, size 0x2089 lma ffffffff88010ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b60
=>  Loading section .data, size 0x448 lma ffffffff88012b78
=>  Start address ffffffff88000004
=>  Transfer rate: 621960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[485/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: sppps01.exe
Result: invalid   
Time: 0:00:00.279656 sppps01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16ec0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016ec0
=>  Loading section .init, size 0x48 lma ffffffff88016f40
=>  Loading section .fini, size 0x30 lma ffffffff88016f88
=>  Loading section .ctors, size 0x8 lma ffffffff88016fb8
=>  Loading section .dtors, size 0x8 lma ffffffff88016fc0
=>  Loading section .rdata, size 0x2258 lma ffffffff88016fd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019228
=>  Loading section .data, size 0x468 lma ffffffff88019240
=>  Start address ffffffff88000004
=>  Transfer rate: 832768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[486/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: spprintk.exe
Result: invalid   
Time: 0:00:00.254716 spprintk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800f370
=>  Loading section .init, size 0x48 lma ffffffff8800f3d0
=>  Loading section .fini, size 0x30 lma ffffffff8800f418
=>  Loading section .ctors, size 0x8 lma ffffffff8800f448
=>  Loading section .dtors, size 0x8 lma ffffffff8800f450
=>  Loading section .rdata, size 0x23ed lma ffffffff8800f460
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011850
=>  Loading section .data, size 0x3c8 lma ffffffff88011868
=>  Start address ffffffff88000004
=>  Transfer rate: 581928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[487/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: spprivenv01.exe
Result: invalid   
Time: 0:00:00.257923 spprivenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11480 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011480
=>  Loading section .init, size 0x48 lma ffffffff880114f0
=>  Loading section .fini, size 0x30 lma ffffffff88011538
=>  Loading section .ctors, size 0x8 lma ffffffff88011568
=>  Loading section .dtors, size 0x8 lma ffffffff88011570
=>  Loading section .rdata, size 0x2100 lma ffffffff88011580
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013680
=>  Loading section .data, size 0x45c lma ffffffff88013698
=>  Start address ffffffff88000004
=>  Transfer rate: 644960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[488/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: spprofiling01.exe
Result: invalid   
Time: 0:00:00.264431 spprofiling01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010250
=>  Loading section .init, size 0x48 lma ffffffff880102c0
=>  Loading section .fini, size 0x30 lma ffffffff88010308
=>  Loading section .ctors, size 0x8 lma ffffffff88010338
=>  Loading section .dtors, size 0x8 lma ffffffff88010340
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011dd8
=>  Loading section .data, size 0x418 lma ffffffff88011df0
=>  Start address ffffffff88000004
=>  Transfer rate: 593864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[489/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: spqreslib.exe
Result: invalid   
Time: 0:00:00.255621 spqreslib.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013360
=>  Loading section .init, size 0x48 lma ffffffff880133d0
=>  Loading section .fini, size 0x30 lma ffffffff88013418
=>  Loading section .ctors, size 0x8 lma ffffffff88013448
=>  Loading section .dtors, size 0x8 lma ffffffff88013450
=>  Loading section .rdata, size 0x2675 lma ffffffff88013460
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015ad8
=>  Loading section .data, size 0x454 lma ffffffff88015af0
=>  Start address ffffffff88000004
=>  Transfer rate: 719304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[490/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid   
Time: 0:00:00.260987 spratemon_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f30
=>  Loading section .init, size 0x48 lma ffffffff88011fa0
=>  Loading section .fini, size 0x30 lma ffffffff88011fe8
=>  Loading section .ctors, size 0x8 lma ffffffff88012018
=>  Loading section .dtors, size 0x8 lma ffffffff88012020
=>  Loading section .rdata, size 0x274d lma ffffffff88012030
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014780
=>  Loading section .data, size 0x448 lma ffffffff88014798
=>  Start address ffffffff88000004
=>  Transfer rate: 679592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[491/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: sprbtree01.exe
Result: invalid   
Time: 0:00:00.254676 sprbtree01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113e0
=>  Loading section .init, size 0x48 lma ffffffff88011450
=>  Loading section .fini, size 0x30 lma ffffffff88011498
=>  Loading section .ctors, size 0x8 lma ffffffff880114c8
=>  Loading section .dtors, size 0x8 lma ffffffff880114d0
=>  Loading section .rdata, size 0x6f71 lma ffffffff880114e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018458
=>  Loading section .data, size 0x498 lma ffffffff88018470
=>  Start address ffffffff88000004
=>  Transfer rate: 804808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[492/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:483 W:0   | mipstx39/jmr3904: spregion_err01.exe
Result: invalid   
Time: 0:00:00.254496 spregion_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ab0
=>  Loading section .init, size 0x48 lma ffffffff88012b20
=>  Loading section .fini, size 0x30 lma ffffffff88012b68
=>  Loading section .ctors, size 0x8 lma ffffffff88012b98
=>  Loading section .dtors, size 0x8 lma ffffffff88012ba0
=>  Loading section .rdata, size 0x2951 lma ffffffff88012bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015508
=>  Loading section .data, size 0x448 lma ffffffff88015520
=>  Start address ffffffff88000004
=>  Transfer rate: 707272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[493/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:488 W:0   | mipstx39/jmr3904: sprmsched01.exe
Result: invalid   
Time: 0:00:00.252899 sprmsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011790
=>  Loading section .init, size 0x48 lma ffffffff88011800
=>  Loading section .fini, size 0x30 lma ffffffff88011848
=>  Loading section .ctors, size 0x8 lma ffffffff88011878
=>  Loading section .dtors, size 0x8 lma ffffffff88011880
=>  Loading section .rdata, size 0x1f51 lma ffffffff88011890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137e8
=>  Loading section .data, size 0x448 lma ffffffff88013800
=>  Start address ffffffff88000004
=>  Transfer rate: 647624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[494/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:488 W:0   | mipstx39/jmr3904: sprmsched02.exe
Result: invalid   
Time: 0:00:00.254541 sprmsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f10
=>  Loading section .init, size 0x48 lma ffffffff88010f80
=>  Loading section .fini, size 0x30 lma ffffffff88010fc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ff8
=>  Loading section .dtors, size 0x8 lma ffffffff88011000
=>  Loading section .rdata, size 0x1f19 lma ffffffff88011010
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f30
=>  Loading section .data, size 0x448 lma ffffffff88012f48
=>  Start address ffffffff88000004
=>  Transfer rate: 629768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[495/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:493 W:0   | mipstx39/jmr3904: spscheduler01.exe
Result: invalid   
Time: 0:00:01.940673 spscheduler01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15050 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015050
=>  Loading section .init, size 0x48 lma ffffffff880150c0
=>  Loading section .fini, size 0x30 lma ffffffff88015108
=>  Loading section .ctors, size 0x8 lma ffffffff88015138
=>  Loading section .dtors, size 0x8 lma ffffffff88015140
=>  Loading section .rdata, size 0x1e45 lma ffffffff88015150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016f98
=>  Loading section .data, size 0x478 lma ffffffff88016fb0
=>  Start address ffffffff88000004
=>  Transfer rate: 762088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[496/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:493 W:0   | mipstx39/jmr3904: spsem01.exe
Result: invalid   
Time: 0:00:01.932234 spsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c40
=>  Loading section .init, size 0x48 lma ffffffff88011cb0
=>  Loading section .fini, size 0x30 lma ffffffff88011cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d28
=>  Loading section .dtors, size 0x8 lma ffffffff88011d30
=>  Loading section .rdata, size 0x2071 lma ffffffff88011d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013db8
=>  Loading section .data, size 0x448 lma ffffffff88013dd0
=>  Start address ffffffff88000004
=>  Transfer rate: 659528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[497/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:493 W:0   | mipstx39/jmr3904: spsem02.exe
Result: invalid   
Time: 0:00:01.939158 spsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f30
=>  Loading section .init, size 0x48 lma ffffffff88011fa0
=>  Loading section .fini, size 0x30 lma ffffffff88011fe8
=>  Loading section .ctors, size 0x8 lma ffffffff88012018
=>  Loading section .dtors, size 0x8 lma ffffffff88012020
=>  Loading section .rdata, size 0x2131 lma ffffffff88012030
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014168
=>  Loading section .data, size 0x448 lma ffffffff88014180
=>  Start address ffffffff88000004
=>  Transfer rate: 667080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[498/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:493 W:0   | mipstx39/jmr3904: spsem03.exe
Result: invalid   
Time: 0:00:00.949085 spsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e70
=>  Loading section .init, size 0x48 lma ffffffff88010ee0
=>  Loading section .fini, size 0x30 lma ffffffff88010f28
=>  Loading section .ctors, size 0x8 lma ffffffff88010f58
=>  Loading section .dtors, size 0x8 lma ffffffff88010f60
=>  Loading section .rdata, size 0x1a05 lma ffffffff88010f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012978
=>  Loading section .data, size 0x448 lma ffffffff88012990
=>  Start address ffffffff88000004
=>  Transfer rate: 618088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[499/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:493 W:0   | mipstx39/jmr3904: spsem_err01.exe
Result: invalid   
Time: 0:00:01.924650 spsem_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011930
=>  Loading section .init, size 0x48 lma ffffffff880119a0
=>  Loading section .fini, size 0x30 lma ffffffff880119e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a18
=>  Loading section .dtors, size 0x8 lma ffffffff88011a20
=>  Loading section .rdata, size 0x2495 lma ffffffff88011a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ec8
=>  Loading section .data, size 0x448 lma ffffffff88013ee0
=>  Start address ffffffff88000004
=>  Transfer rate: 661736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[500/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:493 W:0   | mipstx39/jmr3904: spsem_err02.exe
Result: invalid   
Time: 0:00:01.923010 spsem_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b30
=>  Loading section .init, size 0x48 lma ffffffff88011ba0
=>  Loading section .fini, size 0x30 lma ffffffff88011be8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c18
=>  Loading section .dtors, size 0x8 lma ffffffff88011c20
=>  Loading section .rdata, size 0x232d lma ffffffff88011c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f60
=>  Loading section .data, size 0x448 lma ffffffff88013f78
=>  Start address ffffffff88000004
=>  Transfer rate: 662952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[501/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:494 W:0   | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid   
Time: 0:00:01.221664 spsignal_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10510 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010510
=>  Loading section .init, size 0x48 lma ffffffff88010580
=>  Loading section .fini, size 0x30 lma ffffffff880105c8
=>  Loading section .ctors, size 0x8 lma ffffffff880105f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010600
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012488
=>  Loading section .data, size 0x418 lma ffffffff880124a0
=>  Start address ffffffff88000004
=>  Transfer rate: 607592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[502/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:494 W:0   | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid   
Time: 0:00:01.215740 spsimplesched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11a60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011a60
=>  Loading section .init, size 0x48 lma ffffffff88011ad0
=>  Loading section .fini, size 0x30 lma ffffffff88011b18
=>  Loading section .ctors, size 0x8 lma ffffffff88011b48
=>  Loading section .dtors, size 0x8 lma ffffffff88011b50
=>  Loading section .rdata, size 0x2030 lma ffffffff88011b60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b90
=>  Loading section .data, size 0x5c0 lma ffffffff88013ba8
=>  Start address ffffffff88000004
=>  Transfer rate: 658176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[503/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:494 W:0   | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid   
Time: 0:00:01.223278 spsimplesched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114d0
=>  Loading section .init, size 0x48 lma ffffffff88011540
=>  Loading section .fini, size 0x30 lma ffffffff88011588
=>  Loading section .ctors, size 0x8 lma ffffffff880115b8
=>  Loading section .dtors, size 0x8 lma ffffffff880115c0
=>  Loading section .rdata, size 0x1f81 lma ffffffff880115d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013558
=>  Loading section .data, size 0x448 lma ffffffff88013570
=>  Start address ffffffff88000004
=>  Transfer rate: 642376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[504/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid   
Time: 0:00:00.253791 spsimplesched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10300 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010300
=>  Loading section .init, size 0x48 lma ffffffff88010370
=>  Loading section .fini, size 0x30 lma ffffffff880103b8
=>  Loading section .ctors, size 0x8 lma ffffffff880103e8
=>  Loading section .dtors, size 0x8 lma ffffffff880103f0
=>  Loading section .rdata, size 0x1dd9 lma ffffffff88010400
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121e0
=>  Loading section .data, size 0x448 lma ffffffff880121f8
=>  Start address ffffffff88000004
=>  Transfer rate: 602504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[505/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spsize.exe
Result: invalid   
Time: 0:00:00.257756 spsize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012520
=>  Loading section .init, size 0x48 lma ffffffff88012590
=>  Loading section .fini, size 0x30 lma ffffffff880125d8
=>  Loading section .ctors, size 0x8 lma ffffffff88012608
=>  Loading section .dtors, size 0x8 lma ffffffff88012610
=>  Loading section .rdata, size 0x250c lma ffffffff88012620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014b30
=>  Loading section .data, size 0x424 lma ffffffff88014b48
=>  Start address ffffffff88000004
=>  Transfer rate: 686848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[506/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid   
Time: 0:00:00.257951 spstdthreads01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014310
=>  Loading section .init, size 0x48 lma ffffffff88014390
=>  Loading section .fini, size 0x30 lma ffffffff880143d8
=>  Loading section .ctors, size 0x8 lma ffffffff88014408
=>  Loading section .dtors, size 0x8 lma ffffffff88014410
=>  Loading section .rdata, size 0x1c41 lma ffffffff88014420
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016068
=>  Loading section .data, size 0x530 lma ffffffff88016080
=>  Start address ffffffff88000004
=>  Transfer rate: 732424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[507/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spstkalloc.exe
Result: invalid   
Time: 0:00:00.255126 spstkalloc.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f9e0
=>  Loading section .init, size 0x48 lma ffffffff8800fa50
=>  Loading section .fini, size 0x30 lma ffffffff8800fa98
=>  Loading section .ctors, size 0x8 lma ffffffff8800fac8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fad0
=>  Loading section .rdata, size 0x1e84 lma ffffffff8800fae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011968
=>  Loading section .data, size 0x408 lma ffffffff88011980
=>  Start address ffffffff88000004
=>  Transfer rate: 584672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[508/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid   
Time: 0:00:00.287459 spstkalloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9740 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88009740
=>  Loading section .init, size 0x48 lma ffffffff880097a0
=>  Loading section .fini, size 0x30 lma ffffffff880097e8
=>  Loading section .ctors, size 0x8 lma ffffffff88009818
=>  Loading section .dtors, size 0x8 lma ffffffff88009820
=>  Loading section .rdata, size 0x1998 lma ffffffff88009830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800b1c8
=>  Loading section .data, size 0x2f4 lma ffffffff8800b1e0
=>  Start address ffffffff88000004
=>  Transfer rate: 370272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[509/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid   
Time: 0:00:00.256509 spstkalloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17980 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017980
=>  Loading section .init, size 0x48 lma ffffffff880179f0
=>  Loading section .fini, size 0x30 lma ffffffff88017a38
=>  Loading section .ctors, size 0x8 lma ffffffff88017a68
=>  Loading section .dtors, size 0x8 lma ffffffff88017a70
=>  Loading section .rdata, size 0x2098 lma ffffffff88017a80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019b18
=>  Loading section .data, size 0x5a8 lma ffffffff88019b30
=>  Start address ffffffff88000004
=>  Transfer rate: 853632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[510/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid   
Time: 0:00:00.285932 spstkalloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017930
=>  Loading section .init, size 0x48 lma ffffffff880179a0
=>  Loading section .fini, size 0x30 lma ffffffff880179e8
=>  Loading section .ctors, size 0x8 lma ffffffff88017a18
=>  Loading section .dtors, size 0x8 lma ffffffff88017a20
=>  Loading section .rdata, size 0x2060 lma ffffffff88017a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019a90
=>  Loading section .data, size 0x5a8 lma ffffffff88019aa8
=>  Start address ffffffff88000004
=>  Transfer rate: 852544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[511/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:502 W:0   | mipstx39/jmr3904: spsysinit01.exe
Result: invalid   
Time: 0:00:00.277111 spsysinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ac0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x310 lma ffffffff88018ac0
=>  Loading section .init, size 0x48 lma ffffffff88018dd0
=>  Loading section .fini, size 0x30 lma ffffffff88018e18
=>  Loading section .ctors, size 0x8 lma ffffffff88018e48
=>  Loading section .dtors, size 0x8 lma ffffffff88018e50
=>  Loading section .rdata, size 0x3a3d lma ffffffff88018e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c8a0
=>  Loading section .data, size 0x7c0 lma ffffffff8801c8b8
=>  Start address ffffffff88000004
=>  Transfer rate: 951144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[512/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: spsyslock01.exe
Result: invalid   
Time: 0:00:00.296731 spsyslock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x136c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880136c0
=>  Loading section .init, size 0x48 lma ffffffff88013730
=>  Loading section .fini, size 0x30 lma ffffffff88013778
=>  Loading section .ctors, size 0x8 lma ffffffff880137a8
=>  Loading section .dtors, size 0x8 lma ffffffff880137b0
=>  Loading section .rdata, size 0x1e61 lma ffffffff880137c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015628
=>  Loading section .data, size 0x418 lma ffffffff88015640
=>  Start address ffffffff88000004
=>  Transfer rate: 709192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[513/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: sptask_err01.exe
Result: invalid   
Time: 0:00:00.265231 sptask_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010790
=>  Loading section .init, size 0x48 lma ffffffff88010800
=>  Loading section .fini, size 0x30 lma ffffffff88010848
=>  Loading section .ctors, size 0x8 lma ffffffff88010878
=>  Loading section .dtors, size 0x8 lma ffffffff88010880
=>  Loading section .rdata, size 0x1f25 lma ffffffff88010890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127b8
=>  Loading section .data, size 0x418 lma ffffffff880127d0
=>  Start address ffffffff88000004
=>  Transfer rate: 614120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[514/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: sptask_err02.exe
Result: invalid   
Time: 0:00:00.257896 sptask_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011680
=>  Loading section .init, size 0x48 lma ffffffff880116f0
=>  Loading section .fini, size 0x30 lma ffffffff88011738
=>  Loading section .ctors, size 0x8 lma ffffffff88011768
=>  Loading section .dtors, size 0x8 lma ffffffff88011770
=>  Loading section .rdata, size 0x2145 lma ffffffff88011780
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138c8
=>  Loading section .data, size 0x440 lma ffffffff880138e0
=>  Start address ffffffff88000004
=>  Transfer rate: 649384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[515/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: sptask_err03.exe
Result: invalid   
Time: 0:00:00.261850 sptask_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b60
=>  Loading section .init, size 0x48 lma ffffffff88010bd0
=>  Loading section .fini, size 0x30 lma ffffffff88010c18
=>  Loading section .ctors, size 0x8 lma ffffffff88010c48
=>  Loading section .dtors, size 0x8 lma ffffffff88010c50
=>  Loading section .rdata, size 0x2309 lma ffffffff88010c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f70
=>  Loading section .data, size 0x418 lma ffffffff88012f88
=>  Start address ffffffff88000004
=>  Transfer rate: 629896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[516/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: sptask_err04.exe
Result: invalid   
Time: 0:00:00.260307 sptask_err04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011bc0
=>  Loading section .init, size 0x48 lma ffffffff88011c30
=>  Loading section .fini, size 0x30 lma ffffffff88011c78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ca8
=>  Loading section .dtors, size 0x8 lma ffffffff88011cb0
=>  Loading section .rdata, size 0x248d lma ffffffff88011cc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014150
=>  Loading section .data, size 0x418 lma ffffffff88014168
=>  Start address ffffffff88000004
=>  Transfer rate: 666536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[517/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid   
Time: 0:00:00.260153 sptasknopreempt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b80
=>  Loading section .init, size 0x48 lma ffffffff88010bf0
=>  Loading section .fini, size 0x30 lma ffffffff88010c38
=>  Loading section .ctors, size 0x8 lma ffffffff88010c68
=>  Loading section .dtors, size 0x8 lma ffffffff88010c70
=>  Loading section .rdata, size 0x19f9 lma ffffffff88010c80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012680
=>  Loading section .data, size 0x448 lma ffffffff88012698
=>  Start address ffffffff88000004
=>  Transfer rate: 611976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[518/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: spthread01.exe
Result: invalid   
Time: 0:00:00.254242 spthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x116c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880116c0
=>  Loading section .init, size 0x48 lma ffffffff88011730
=>  Loading section .fini, size 0x30 lma ffffffff88011778
=>  Loading section .ctors, size 0x8 lma ffffffff880117a8
=>  Loading section .dtors, size 0x8 lma ffffffff880117b0
=>  Loading section .rdata, size 0x1a39 lma ffffffff880117c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013200
=>  Loading section .data, size 0x418 lma ffffffff88013218
=>  Start address ffffffff88000004
=>  Transfer rate: 635144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[519/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:510 W:0   | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid   
Time: 0:00:00.251883 spthreadlife01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e10
=>  Loading section .init, size 0x48 lma ffffffff88012e80
=>  Loading section .fini, size 0x30 lma ffffffff88012ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88012f00
=>  Loading section .rdata, size 0x1d05 lma ffffffff88012f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c18
=>  Loading section .data, size 0x478 lma ffffffff88014c30
=>  Start address ffffffff88000004
=>  Transfer rate: 689384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[520/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:518 W:0   | mipstx39/jmr3904: spthreadq01.exe
Result: invalid   
Time: 0:00:00.592899 spthreadq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012280
=>  Loading section .init, size 0x48 lma ffffffff88012300
=>  Loading section .fini, size 0x30 lma ffffffff88012348
=>  Loading section .ctors, size 0x8 lma ffffffff88012378
=>  Loading section .dtors, size 0x8 lma ffffffff88012380
=>  Loading section .rdata, size 0x1b89 lma ffffffff88012390
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f20
=>  Loading section .data, size 0x4c8 lma ffffffff88013f38
=>  Start address ffffffff88000004
=>  Transfer rate: 663432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[521/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:517 W:0   | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid   
Time: 0:00:00.606017 sptimecounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x6580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x50 lma ffffffff88006580
=>  Loading section .init, size 0x48 lma ffffffff880065d0
=>  Loading section .fini, size 0x30 lma ffffffff88006618
=>  Loading section .ctors, size 0x8 lma ffffffff88006648
=>  Loading section .dtors, size 0x8 lma ffffffff88006650
=>  Loading section .rdata, size 0x1754 lma ffffffff88006660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88007db8
=>  Loading section .data, size 0x240 lma ffffffff88007dd0
=>  Start address ffffffff88000004
=>  Transfer rate: 262176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[522/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:517 W:0   | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid   
Time: 0:00:00.598524 sptimecounter02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012360
=>  Loading section .init, size 0x48 lma ffffffff880123e0
=>  Loading section .fini, size 0x30 lma ffffffff88012428
=>  Loading section .ctors, size 0x8 lma ffffffff88012458
=>  Loading section .dtors, size 0x8 lma ffffffff88012460
=>  Loading section .rdata, size 0x1b51 lma ffffffff88012470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013fc8
=>  Loading section .data, size 0x448 lma ffffffff88013fe0
=>  Start address ffffffff88000004
=>  Transfer rate: 663752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[523/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:518 W:0   | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid   
Time: 0:00:00.592081 sptimecounter03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11090 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011090
=>  Loading section .init, size 0x48 lma ffffffff88011100
=>  Loading section .fini, size 0x30 lma ffffffff88011148
=>  Loading section .ctors, size 0x8 lma ffffffff88011178
=>  Loading section .dtors, size 0x8 lma ffffffff88011180
=>  Loading section .rdata, size 0x1a29 lma ffffffff88011190
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012bc0
=>  Loading section .data, size 0x448 lma ffffffff88012bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 622728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[524/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid   
Time: 0:00:00.251284 sptimecounter04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010540
=>  Loading section .init, size 0x48 lma ffffffff880105b0
=>  Loading section .fini, size 0x30 lma ffffffff880105f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010628
=>  Loading section .dtors, size 0x8 lma ffffffff88010630
=>  Loading section .rdata, size 0x1aa5 lma ffffffff88010640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120e8
=>  Loading section .data, size 0x418 lma ffffffff88012100
=>  Start address ffffffff88000004
=>  Transfer rate: 600168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[525/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid   
Time: 0:00:00.256909 sptimer_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012400
=>  Loading section .init, size 0x48 lma ffffffff88012470
=>  Loading section .fini, size 0x30 lma ffffffff880124b8
=>  Loading section .ctors, size 0x8 lma ffffffff880124e8
=>  Loading section .dtors, size 0x8 lma ffffffff880124f0
=>  Loading section .rdata, size 0x257d lma ffffffff88012500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a80
=>  Loading section .data, size 0x470 lma ffffffff88014a98
=>  Start address ffffffff88000004
=>  Transfer rate: 686056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[526/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid   
Time: 0:00:00.257477 sptimer_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x123b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880123b0
=>  Loading section .init, size 0x48 lma ffffffff88012420
=>  Loading section .fini, size 0x30 lma ffffffff88012468
=>  Loading section .ctors, size 0x8 lma ffffffff88012498
=>  Loading section .dtors, size 0x8 lma ffffffff880124a0
=>  Loading section .rdata, size 0x238d lma ffffffff880124b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014840
=>  Loading section .data, size 0x470 lma ffffffff88014858
=>  Start address ffffffff88000004
=>  Transfer rate: 681448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[527/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid   
Time: 0:00:00.258075 sptimerserver01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11890 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011890
=>  Loading section .init, size 0x48 lma ffffffff88011900
=>  Loading section .fini, size 0x30 lma ffffffff88011948
=>  Loading section .ctors, size 0x8 lma ffffffff88011978
=>  Loading section .dtors, size 0x8 lma ffffffff88011980
=>  Loading section .rdata, size 0x1ab5 lma ffffffff88011990
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013448
=>  Loading section .data, size 0x470 lma ffffffff88013460
=>  Start address ffffffff88000004
=>  Transfer rate: 640552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[528/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimespec01.exe
Result: invalid   
Time: 0:00:00.256170 sptimespec01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10cb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010cb0
=>  Loading section .init, size 0x48 lma ffffffff88010d20
=>  Loading section .fini, size 0x30 lma ffffffff88010d68
=>  Loading section .ctors, size 0x8 lma ffffffff88010d98
=>  Loading section .dtors, size 0x8 lma ffffffff88010da0
=>  Loading section .rdata, size 0x1d85 lma ffffffff88010db0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b38
=>  Loading section .data, size 0x428 lma ffffffff88012b50
=>  Start address ffffffff88000004
=>  Transfer rate: 621416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[529/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls01.exe
Result: invalid   
Time: 0:00:00.258750 sptls01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b10
=>  Loading section .init, size 0x48 lma ffffffff88010b80
=>  Loading section .fini, size 0x30 lma ffffffff88010bc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010bf8
=>  Loading section .dtors, size 0x8 lma ffffffff88010c00
=>  Loading section .rdata, size 0x1a45 lma ffffffff88010c10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012658
=>  Loading section .tdata, size 0x1 lma ffffffff88012670
=>  Loading section .data, size 0x420 lma ffffffff88012678
=>  Start address ffffffff88000004
=>  Transfer rate: 611376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[530/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls02.exe
Result: invalid   
Time: 0:00:00.254767 sptls02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e0bc lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x74 lma ffffffff8802e0bc
=>  Loading section .init, size 0x48 lma ffffffff8802e130
=>  Loading section .fini, size 0x30 lma ffffffff8802e178
=>  Loading section .ctors, size 0x18 lma ffffffff8802e1a8
=>  Loading section .dtors, size 0x8 lma ffffffff8802e1c0
=>  Loading section .rdata, size 0x423c lma ffffffff8802e1d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88032410
=>  Loading section .rel.dyn, size 0x10 lma ffffffff88032428
=>  Loading section .tdata, size 0x114 lma ffffffff88032600
=>  Loading section .data, size 0x63c lma ffffffff88032800
=>  Loading section .sdata, size 0x4 lma ffffffff88032e40
=>  Start address ffffffff88000004
=>  Transfer rate: 1661952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[531/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls03.exe
Result: invalid   
Time: 0:00:00.256039 sptls03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88009420
=>  Loading section .init, size 0x48 lma ffffffff88009480
=>  Loading section .fini, size 0x30 lma ffffffff880094c8
=>  Loading section .ctors, size 0x8 lma ffffffff880094f8
=>  Loading section .dtors, size 0x8 lma ffffffff88009500
=>  Loading section .rdata, size 0x1568 lma ffffffff88009510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800aa78
=>  Loading section .data, size 0x2f8 lma ffffffff8800aa90
=>  Start address ffffffff88000004
=>  Transfer rate: 355328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[532/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:523 W:0   | mipstx39/jmr3904: sptls04.exe
Result: invalid   
Time: 0:00:00.253895 sptls04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f310
=>  Loading section .init, size 0x48 lma ffffffff8800f380
=>  Loading section .fini, size 0x30 lma ffffffff8800f3c8
=>  Loading section .ctors, size 0xc lma ffffffff8800f3f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f404
=>  Loading section .rdata, size 0x1995 lma ffffffff8800f410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010da8
=>  Loading section .data, size 0x408 lma ffffffff88010dc0
=>  Start address ffffffff88000004
=>  Transfer rate: 560648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[533/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: spversion01.exe
Result: invalid   
Time: 0:00:00.258305 spversion01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f3c0
=>  Loading section .init, size 0x48 lma ffffffff8800f430
=>  Loading section .fini, size 0x30 lma ffffffff8800f478
=>  Loading section .ctors, size 0x8 lma ffffffff8800f4a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f4b0
=>  Loading section .rdata, size 0x1a29 lma ffffffff8800f4c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ef0
=>  Loading section .data, size 0x408 lma ffffffff88010f08
=>  Start address ffffffff88000004
=>  Transfer rate: 563208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[534/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: spwatchdog.exe
Result: invalid   
Time: 0:00:00.255927 spwatchdog.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12dd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012dd0
=>  Loading section .init, size 0x48 lma ffffffff88012e40
=>  Loading section .fini, size 0x30 lma ffffffff88012e88
=>  Loading section .ctors, size 0x8 lma ffffffff88012eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88012ec0
=>  Loading section .rdata, size 0x2568 lma ffffffff88012ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015438
=>  Loading section .data, size 0x490 lma ffffffff88015450
=>  Start address ffffffff88000004
=>  Transfer rate: 706240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[535/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: spwkspace.exe
Result: invalid   
Time: 0:00:00.258348 spwkspace.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fa00
=>  Loading section .init, size 0x48 lma ffffffff8800fa70
=>  Loading section .fini, size 0x30 lma ffffffff8800fab8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fae8
=>  Loading section .dtors, size 0x8 lma ffffffff8800faf0
=>  Loading section .rdata, size 0x1c21 lma ffffffff8800fb00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011728
=>  Loading section .data, size 0x408 lma ffffffff88011740
=>  Start address ffffffff88000004
=>  Transfer rate: 580040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[536/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: tm01.exe
Result: invalid   
Time: 0:00:00.256928 tm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109f0
=>  Loading section .init, size 0x48 lma ffffffff88010a60
=>  Loading section .fini, size 0x30 lma ffffffff88010aa8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ad8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ae0
=>  Loading section .rdata, size 0x1e7d lma ffffffff88010af0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012970
=>  Loading section .data, size 0x438 lma ffffffff88012988
=>  Start address ffffffff88000004
=>  Transfer rate: 617896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[537/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: tm02.exe
Result: invalid   
Time: 0:00:00.255480 tm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010420
=>  Loading section .init, size 0x48 lma ffffffff88010490
=>  Loading section .fini, size 0x30 lma ffffffff880104d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010508
=>  Loading section .dtors, size 0x8 lma ffffffff88010510
=>  Loading section .rdata, size 0x1e9d lma ffffffff88010520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123c0
=>  Loading section .data, size 0x438 lma ffffffff880123d8
=>  Start address ffffffff88000004
=>  Transfer rate: 606248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[538/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: tm03.exe
Result: invalid   
Time: 0:00:00.259955 tm03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010960
=>  Loading section .init, size 0x48 lma ffffffff880109d0
=>  Loading section .fini, size 0x30 lma ffffffff88010a18
=>  Loading section .ctors, size 0x8 lma ffffffff88010a48
=>  Loading section .dtors, size 0x8 lma ffffffff88010a50
=>  Loading section .rdata, size 0x1e65 lma ffffffff88010a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128c8
=>  Loading section .data, size 0x438 lma ffffffff880128e0
=>  Start address ffffffff88000004
=>  Transfer rate: 616552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[539/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: tm04.exe
Result: invalid   
Time: 0:00:00.256053 tm04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12050 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012050
=>  Loading section .init, size 0x48 lma ffffffff880120c0
=>  Loading section .fini, size 0x30 lma ffffffff88012108
=>  Loading section .ctors, size 0x8 lma ffffffff88012138
=>  Loading section .dtors, size 0x8 lma ffffffff88012140
=>  Loading section .rdata, size 0x20dd lma ffffffff88012150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014230
=>  Loading section .data, size 0x438 lma ffffffff88014248
=>  Start address ffffffff88000004
=>  Transfer rate: 668584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[540/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:531 W:0   | mipstx39/jmr3904: tm05.exe
Result: invalid   
Time: 0:00:00.252050 tm05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f8a0
=>  Loading section .init, size 0x48 lma ffffffff8800f910
=>  Loading section .fini, size 0x30 lma ffffffff8800f958
=>  Loading section .ctors, size 0x8 lma ffffffff8800f988
=>  Loading section .dtors, size 0x8 lma ffffffff8800f990
=>  Loading section .rdata, size 0x1ded lma ffffffff8800f9a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011790
=>  Loading section .data, size 0x408 lma ffffffff880117a8
=>  Start address ffffffff88000004
=>  Transfer rate: 580904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[541/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm06.exe
Result: invalid   
Time: 0:00:00.257798 tm06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010160
=>  Loading section .init, size 0x48 lma ffffffff880101d0
=>  Loading section .fini, size 0x30 lma ffffffff88010218
=>  Loading section .ctors, size 0x8 lma ffffffff88010248
=>  Loading section .dtors, size 0x8 lma ffffffff88010250
=>  Loading section .rdata, size 0x1e65 lma ffffffff88010260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120c8
=>  Loading section .data, size 0x408 lma ffffffff880120e0
=>  Start address ffffffff88000004
=>  Transfer rate: 599784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[542/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm07.exe
Result: invalid   
Time: 0:00:00.271133 tm07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbe0
=>  Loading section .init, size 0x48 lma ffffffff8800fc50
=>  Loading section .fini, size 0x30 lma ffffffff8800fc98
=>  Loading section .ctors, size 0x8 lma ffffffff8800fcc8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fcd0
=>  Loading section .rdata, size 0x1dc5 lma ffffffff8800fce0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011aa8
=>  Loading section .data, size 0x408 lma ffffffff88011ac0
=>  Start address ffffffff88000004
=>  Transfer rate: 587240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[543/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm08.exe
Result: invalid   
Time: 0:00:00.256121 tm08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11080 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011080
=>  Loading section .init, size 0x48 lma ffffffff880110f0
=>  Loading section .fini, size 0x30 lma ffffffff88011138
=>  Loading section .ctors, size 0x8 lma ffffffff88011168
=>  Loading section .dtors, size 0x8 lma ffffffff88011170
=>  Loading section .rdata, size 0x1fb5 lma ffffffff88011180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013138
=>  Loading section .data, size 0x440 lma ffffffff88013150
=>  Start address ffffffff88000004
=>  Transfer rate: 633896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[544/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm09.exe
Result: invalid   
Time: 0:00:00.259128 tm09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108c0
=>  Loading section .init, size 0x48 lma ffffffff88010930
=>  Loading section .fini, size 0x30 lma ffffffff88010978
=>  Loading section .ctors, size 0x8 lma ffffffff880109a8
=>  Loading section .dtors, size 0x8 lma ffffffff880109b0
=>  Loading section .rdata, size 0x1ef5 lma ffffffff880109c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b8
=>  Loading section .data, size 0x438 lma ffffffff880128d0
=>  Start address ffffffff88000004
=>  Transfer rate: 616424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[545/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm10.exe
Result: invalid   
Time: 0:00:00.259243 tm10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010250
=>  Loading section .init, size 0x48 lma ffffffff880102c0
=>  Loading section .fini, size 0x30 lma ffffffff88010308
=>  Loading section .ctors, size 0x8 lma ffffffff88010338
=>  Loading section .dtors, size 0x8 lma ffffffff88010340
=>  Loading section .rdata, size 0x1e45 lma ffffffff88010350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012198
=>  Loading section .data, size 0x438 lma ffffffff880121b0
=>  Start address ffffffff88000004
=>  Transfer rate: 601832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[546/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm11.exe
Result: invalid   
Time: 0:00:00.258967 tm11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105e0
=>  Loading section .init, size 0x48 lma ffffffff88010650
=>  Loading section .fini, size 0x30 lma ffffffff88010698
=>  Loading section .ctors, size 0x8 lma ffffffff880106c8
=>  Loading section .dtors, size 0x8 lma ffffffff880106d0
=>  Loading section .rdata, size 0x1e35 lma ffffffff880106e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012518
=>  Loading section .data, size 0x438 lma ffffffff88012530
=>  Start address ffffffff88000004
=>  Transfer rate: 609000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[547/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm12.exe
Result: invalid   
Time: 0:00:00.257513 tm12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010620
=>  Loading section .init, size 0x48 lma ffffffff88010690
=>  Loading section .fini, size 0x30 lma ffffffff880106d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010708
=>  Loading section .dtors, size 0x8 lma ffffffff88010710
=>  Loading section .rdata, size 0x1e35 lma ffffffff88010720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012558
=>  Loading section .data, size 0x438 lma ffffffff88012570
=>  Start address ffffffff88000004
=>  Transfer rate: 609512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[548/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:539 W:0   | mipstx39/jmr3904: tm13.exe
Result: invalid   
Time: 0:00:00.276026 tm13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105d0
=>  Loading section .init, size 0x48 lma ffffffff88010640
=>  Loading section .fini, size 0x30 lma ffffffff88010688
=>  Loading section .ctors, size 0x8 lma ffffffff880106b8
=>  Loading section .dtors, size 0x8 lma ffffffff880106c0
=>  Loading section .rdata, size 0x1e35 lma ffffffff880106d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012508
=>  Loading section .data, size 0x438 lma ffffffff88012520
=>  Start address ffffffff88000004
=>  Transfer rate: 608872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[549/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm14.exe
Result: invalid   
Time: 0:00:00.258450 tm14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010620
=>  Loading section .init, size 0x48 lma ffffffff88010690
=>  Loading section .fini, size 0x30 lma ffffffff880106d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010708
=>  Loading section .dtors, size 0x8 lma ffffffff88010710
=>  Loading section .rdata, size 0x1e35 lma ffffffff88010720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012558
=>  Loading section .data, size 0x438 lma ffffffff88012570
=>  Start address ffffffff88000004
=>  Transfer rate: 609512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[550/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm15.exe
Result: invalid   
Time: 0:00:00.254661 tm15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd90
=>  Loading section .init, size 0x48 lma ffffffff8800fe00
=>  Loading section .fini, size 0x30 lma ffffffff8800fe48
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe78
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe80
=>  Loading section .rdata, size 0x1ed5 lma ffffffff8800fe90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d68
=>  Loading section .data, size 0x408 lma ffffffff88011d80
=>  Start address ffffffff88000004
=>  Transfer rate: 592872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[551/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm16.exe
Result: invalid   
Time: 0:00:00.258158 tm16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc60
=>  Loading section .init, size 0x48 lma ffffffff8800fcd0
=>  Loading section .fini, size 0x30 lma ffffffff8800fd18
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd48
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd50
=>  Loading section .rdata, size 0x1e0d lma ffffffff8800fd60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b70
=>  Loading section .data, size 0x408 lma ffffffff88011b88
=>  Start address ffffffff88000004
=>  Transfer rate: 588840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[552/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm17.exe
Result: invalid   
Time: 0:00:00.257742 tm17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f9e0
=>  Loading section .init, size 0x48 lma ffffffff8800fa50
=>  Loading section .fini, size 0x30 lma ffffffff8800fa98
=>  Loading section .ctors, size 0x8 lma ffffffff8800fac8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fad0
=>  Loading section .rdata, size 0x1dcd lma ffffffff8800fae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118b0
=>  Loading section .data, size 0x408 lma ffffffff880118c8
=>  Start address ffffffff88000004
=>  Transfer rate: 583208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[553/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm18.exe
Result: invalid   
Time: 0:00:00.256867 tm18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f650
=>  Loading section .init, size 0x48 lma ffffffff8800f6c0
=>  Loading section .fini, size 0x30 lma ffffffff8800f708
=>  Loading section .ctors, size 0x8 lma ffffffff8800f738
=>  Loading section .dtors, size 0x8 lma ffffffff8800f740
=>  Loading section .rdata, size 0x1dbd lma ffffffff8800f750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011510
=>  Loading section .data, size 0x408 lma ffffffff88011528
=>  Start address ffffffff88000004
=>  Transfer rate: 575784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[554/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm19.exe
Result: invalid   
Time: 0:00:00.257731 tm19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010130
=>  Loading section .init, size 0x48 lma ffffffff880101a0
=>  Loading section .fini, size 0x30 lma ffffffff880101e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010218
=>  Loading section .dtors, size 0x8 lma ffffffff88010220
=>  Loading section .rdata, size 0x1f1d lma ffffffff88010230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012150
=>  Loading section .data, size 0x408 lma ffffffff88012168
=>  Start address ffffffff88000004
=>  Transfer rate: 600872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[555/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm20.exe
Result: invalid   
Time: 0:00:00.253655 tm20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x117a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880117a0
=>  Loading section .init, size 0x48 lma ffffffff88011820
=>  Loading section .fini, size 0x30 lma ffffffff88011868
=>  Loading section .ctors, size 0x8 lma ffffffff88011898
=>  Loading section .dtors, size 0x8 lma ffffffff880118a0
=>  Loading section .rdata, size 0x21b5 lma ffffffff880118b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a68
=>  Loading section .data, size 0x480 lma ffffffff88013a80
=>  Start address ffffffff88000004
=>  Transfer rate: 653224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[556/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:547 W:0   | mipstx39/jmr3904: tm21.exe
Result: invalid   
Time: 0:00:00.252923 tm21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11170 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88011170
=>  Loading section .init, size 0x48 lma ffffffff88011200
=>  Loading section .fini, size 0x30 lma ffffffff88011248
=>  Loading section .ctors, size 0x8 lma ffffffff88011278
=>  Loading section .dtors, size 0x8 lma ffffffff88011280
=>  Loading section .rdata, size 0x1f85 lma ffffffff88011290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013218
=>  Loading section .data, size 0x558 lma ffffffff88013230
=>  Start address ffffffff88000004
=>  Transfer rate: 637928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[557/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm22.exe
Result: invalid   
Time: 0:00:00.257051 tm22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107d0
=>  Loading section .init, size 0x48 lma ffffffff88010840
=>  Loading section .fini, size 0x30 lma ffffffff88010888
=>  Loading section .ctors, size 0x8 lma ffffffff880108b8
=>  Loading section .dtors, size 0x8 lma ffffffff880108c0
=>  Loading section .rdata, size 0x1f05 lma ffffffff880108d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127d8
=>  Loading section .data, size 0x438 lma ffffffff880127f0
=>  Start address ffffffff88000004
=>  Transfer rate: 614632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[558/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm23.exe
Result: invalid   
Time: 0:00:00.254260 tm23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113b0
=>  Loading section .init, size 0x48 lma ffffffff88011420
=>  Loading section .fini, size 0x30 lma ffffffff88011468
=>  Loading section .ctors, size 0x8 lma ffffffff88011498
=>  Loading section .dtors, size 0x8 lma ffffffff880114a0
=>  Loading section .rdata, size 0x2019 lma ffffffff880114b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134d0
=>  Loading section .data, size 0x470 lma ffffffff880134e8
=>  Start address ffffffff88000004
=>  Transfer rate: 641608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[559/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm24.exe
Result: invalid   
Time: 0:00:00.256547 tm24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f7b0
=>  Loading section .init, size 0x48 lma ffffffff8800f820
=>  Loading section .fini, size 0x30 lma ffffffff8800f868
=>  Loading section .ctors, size 0x8 lma ffffffff8800f898
=>  Loading section .dtors, size 0x8 lma ffffffff8800f8a0
=>  Loading section .rdata, size 0x1e15 lma ffffffff8800f8b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116c8
=>  Loading section .data, size 0x408 lma ffffffff880116e0
=>  Start address ffffffff88000004
=>  Transfer rate: 579304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[560/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm25.exe
Result: invalid   
Time: 0:00:00.262306 tm25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106b0
=>  Loading section .init, size 0x48 lma ffffffff88010720
=>  Loading section .fini, size 0x30 lma ffffffff88010768
=>  Loading section .ctors, size 0x8 lma ffffffff88010798
=>  Loading section .dtors, size 0x8 lma ffffffff880107a0
=>  Loading section .rdata, size 0x1e29 lma ffffffff880107b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125e0
=>  Loading section .data, size 0x448 lma ffffffff880125f8
=>  Start address ffffffff88000004
=>  Transfer rate: 610696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[561/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm26.exe
Result: invalid   
Time: 0:00:00.277513 tm26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018de0
=>  Loading section .init, size 0x48 lma ffffffff88018e50
=>  Loading section .fini, size 0x30 lma ffffffff88018e98
=>  Loading section .ctors, size 0x8 lma ffffffff88018ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88018ed0
=>  Loading section .rdata, size 0x2878 lma ffffffff88018ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b758
=>  Loading section .data, size 0x5d8 lma ffffffff8801b770
=>  Start address ffffffff88000004
=>  Transfer rate: 911872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[562/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm27.exe
Result: invalid   
Time: 0:00:00.262116 tm27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010fb0
=>  Loading section .init, size 0x48 lma ffffffff88011020
=>  Loading section .fini, size 0x30 lma ffffffff88011068
=>  Loading section .ctors, size 0x8 lma ffffffff88011098
=>  Loading section .dtors, size 0x8 lma ffffffff880110a0
=>  Loading section .rdata, size 0x1f4d lma ffffffff880110b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013000
=>  Loading section .data, size 0x414 lma ffffffff88013018
=>  Start address ffffffff88000004
=>  Transfer rate: 631048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[563/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm28.exe
Result: invalid   
Time: 0:00:00.262399 tm28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fa80
=>  Loading section .init, size 0x48 lma ffffffff8800faf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fb38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fb70
=>  Loading section .rdata, size 0x1e2d lma ffffffff8800fb80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119b0
=>  Loading section .data, size 0x438 lma ffffffff880119c8
=>  Start address ffffffff88000004
=>  Transfer rate: 585640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[564/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:555 W:0   | mipstx39/jmr3904: tm29.exe
Result: invalid   
Time: 0:00:00.257102 tm29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=>  Loading section .init, size 0x48 lma ffffffff88010710
=>  Loading section .fini, size 0x30 lma ffffffff88010758
=>  Loading section .ctors, size 0x8 lma ffffffff88010788
=>  Loading section .dtors, size 0x8 lma ffffffff88010790
=>  Loading section .rdata, size 0x1f4d lma ffffffff880107a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126f0
=>  Loading section .data, size 0x438 lma ffffffff88012708
=>  Start address ffffffff88000004
=>  Transfer rate: 612776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[565/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm30.exe
Result: invalid   
Time: 0:00:00.258135 tm30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbb0
=>  Loading section .init, size 0x48 lma ffffffff8800fc20
=>  Loading section .fini, size 0x30 lma ffffffff8800fc68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fca0
=>  Loading section .rdata, size 0x1e25 lma ffffffff8800fcb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ad8
=>  Loading section .data, size 0x438 lma ffffffff88011af0
=>  Start address ffffffff88000004
=>  Transfer rate: 588008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[566/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm31.exe
Result: invalid   
Time: 0:00:00.263167 tm31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010420
=>  Loading section .init, size 0x48 lma ffffffff88010490
=>  Loading section .fini, size 0x30 lma ffffffff880104d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010508
=>  Loading section .dtors, size 0x8 lma ffffffff88010510
=>  Loading section .rdata, size 0x1ead lma ffffffff88010520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123d0
=>  Loading section .data, size 0x438 lma ffffffff880123e8
=>  Start address ffffffff88000004
=>  Transfer rate: 606376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[567/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm32.exe
Result: invalid   
Time: 0:00:00.256083 tm32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010960
=>  Loading section .init, size 0x48 lma ffffffff880109d0
=>  Loading section .fini, size 0x30 lma ffffffff88010a18
=>  Loading section .ctors, size 0x8 lma ffffffff88010a48
=>  Loading section .dtors, size 0x8 lma ffffffff88010a50
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d8
=>  Loading section .data, size 0x438 lma ffffffff880128f0
=>  Start address ffffffff88000004
=>  Transfer rate: 616680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[568/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm33.exe
Result: invalid   
Time: 0:00:00.265443 tm33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010420
=>  Loading section .init, size 0x48 lma ffffffff88010490
=>  Loading section .fini, size 0x30 lma ffffffff880104d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010508
=>  Loading section .dtors, size 0x8 lma ffffffff88010510
=>  Loading section .rdata, size 0x1ea5 lma ffffffff88010520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123c8
=>  Loading section .data, size 0x438 lma ffffffff880123e0
=>  Start address ffffffff88000004
=>  Transfer rate: 606312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[569/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm34.exe
Result: invalid   
Time: 0:00:00.259706 tm34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010960
=>  Loading section .init, size 0x48 lma ffffffff880109d0
=>  Loading section .fini, size 0x30 lma ffffffff88010a18
=>  Loading section .ctors, size 0x8 lma ffffffff88010a48
=>  Loading section .dtors, size 0x8 lma ffffffff88010a50
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d8
=>  Loading section .data, size 0x438 lma ffffffff880128f0
=>  Start address ffffffff88000004
=>  Transfer rate: 616680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[570/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm35.exe
Result: invalid   
Time: 0:00:00.261607 tm35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010420
=>  Loading section .init, size 0x48 lma ffffffff88010490
=>  Loading section .fini, size 0x30 lma ffffffff880104d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010508
=>  Loading section .dtors, size 0x8 lma ffffffff88010510
=>  Loading section .rdata, size 0x1ead lma ffffffff88010520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123d0
=>  Loading section .data, size 0x438 lma ffffffff880123e8
=>  Start address ffffffff88000004
=>  Transfer rate: 606376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[571/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tm36.exe
Result: invalid   
Time: 0:00:00.258980 tm36.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010960
=>  Loading section .init, size 0x48 lma ffffffff880109d0
=>  Loading section .fini, size 0x30 lma ffffffff88010a18
=>  Loading section .ctors, size 0x8 lma ffffffff88010a48
=>  Loading section .dtors, size 0x8 lma ffffffff88010a50
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d8
=>  Loading section .data, size 0x438 lma ffffffff880128f0
=>  Start address ffffffff88000004
=>  Transfer rate: 616680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[572/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:563 W:0   | mipstx39/jmr3904: tmck.exe
Result: invalid   
Time: 0:00:00.270087 tmck.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f840
=>  Loading section .init, size 0x48 lma ffffffff8800f8b0
=>  Loading section .fini, size 0x30 lma ffffffff8800f8f8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f928
=>  Loading section .dtors, size 0x8 lma ffffffff8800f930
=>  Loading section .rdata, size 0x1f01 lma ffffffff8800f940
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011848
=>  Loading section .data, size 0x408 lma ffffffff88011860
=>  Start address ffffffff88000004
=>  Transfer rate: 582344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[573/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: tmcontext01.exe
Result: invalid   
Time: 0:00:00.257527 tmcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103b0
=>  Loading section .init, size 0x48 lma ffffffff88010420
=>  Loading section .fini, size 0x30 lma ffffffff88010468
=>  Loading section .ctors, size 0x8 lma ffffffff88010498
=>  Loading section .dtors, size 0x8 lma ffffffff880104a0
=>  Loading section .rdata, size 0x1ac5 lma ffffffff880104b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f78
=>  Loading section .data, size 0x408 lma ffffffff88011f90
=>  Start address ffffffff88000004
=>  Transfer rate: 597096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[574/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: tmfine01.exe
Result: invalid   
Time: 0:00:00.265194 tmfine01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014c60
=>  Loading section .init, size 0x48 lma ffffffff88014ce0
=>  Loading section .fini, size 0x30 lma ffffffff88014d28
=>  Loading section .ctors, size 0x8 lma ffffffff88014d58
=>  Loading section .dtors, size 0x8 lma ffffffff88014d60
=>  Loading section .rdata, size 0x1c91 lma ffffffff88014d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016a08
=>  Loading section .data, size 0x4a8 lma ffffffff88016a20
=>  Start address ffffffff88000004
=>  Transfer rate: 751048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[575/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: tmonetoone.exe
Result: invalid   
Time: 0:00:00.259849 tmonetoone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011de0
=>  Loading section .init, size 0x48 lma ffffffff88011e50
=>  Loading section .fini, size 0x30 lma ffffffff88011e98
=>  Loading section .ctors, size 0x8 lma ffffffff88011ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ed0
=>  Loading section .rdata, size 0x1aa9 lma ffffffff88011ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013990
=>  Loading section .data, size 0x448 lma ffffffff880139a8
=>  Start address ffffffff88000004
=>  Transfer rate: 651016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[576/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: tmtimer01.exe
Result: invalid   
Time: 0:00:00.268633 tmtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010d50
=>  Loading section .init, size 0x48 lma ffffffff88010dd0
=>  Loading section .fini, size 0x30 lma ffffffff88010e18
=>  Loading section .ctors, size 0x8 lma ffffffff88010e48
=>  Loading section .dtors, size 0x8 lma ffffffff88010e50
=>  Loading section .rdata, size 0x1b08 lma ffffffff88010e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012968
=>  Loading section .data, size 0x448 lma ffffffff88012980
=>  Start address ffffffff88000004
=>  Transfer rate: 617984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[577/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid   
Time: 0:00:00.265006 ts-unit-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800f5c0
=>  Loading section .init, size 0x48 lma ffffffff8800f640
=>  Loading section .fini, size 0x30 lma ffffffff8800f688
=>  Loading section .ctors, size 0x8 lma ffffffff8800f6b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f6c0
=>  Loading section .rdata, size 0x4968 lma ffffffff8800f6d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014038
=>  Loading section .data, size 0x248 lma ffffffff88014050
=>  Start address ffffffff88000004
=>  Transfer rate: 660608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[578/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid   
Time: 0:00:00.257870 ts-fatal-init-task-construct-failed.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800cee0
=>  Loading section .init, size 0x48 lma ffffffff8800cf60
=>  Loading section .fini, size 0x30 lma ffffffff8800cfa8
=>  Loading section .ctors, size 0x8 lma ffffffff8800cfd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800cfe0
=>  Loading section .rdata, size 0x18c0 lma ffffffff8800cff0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e8b0
=>  Loading section .data, size 0x22c lma ffffffff8800e8c8
=>  Start address ffffffff88000004
=>  Transfer rate: 481120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[579/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid   
Time: 0:00:00.267788 ts-fatal-too-large-tls-size.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xa220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800a220
=>  Loading section .init, size 0x48 lma ffffffff8800a290
=>  Loading section .fini, size 0x30 lma ffffffff8800a2d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800a308
=>  Loading section .dtors, size 0x8 lma ffffffff8800a310
=>  Loading section .rdata, size 0x183c lma ffffffff8800a320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bb60
=>  Loading section .data, size 0x204 lma ffffffff8800bb78
=>  Start address ffffffff88000004
=>  Transfer rate: 387968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[580/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:571 W:0   | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid   
Time: 0:00:00.251961 ts-performance-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x175e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xa0 lma ffffffff880175e0
=>  Loading section .init, size 0x48 lma ffffffff88017680
=>  Loading section .fini, size 0x30 lma ffffffff880176c8
=>  Loading section .ctors, size 0x8 lma ffffffff880176f8
=>  Loading section .dtors, size 0x8 lma ffffffff88017700
=>  Loading section .rdata, size 0x2730 lma ffffffff88017710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019e40
=>  Loading section .data, size 0x3c4 lma ffffffff88019e58
=>  Start address ffffffff88000004
=>  Transfer rate: 856224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[581/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-terminate.exe
Result: invalid   
Time: 0:00:00.267867 ts-terminate.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10dd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010dd0
=>  Loading section .init, size 0x48 lma ffffffff88010e40
=>  Loading section .fini, size 0x30 lma ffffffff88010e88
=>  Loading section .ctors, size 0x8 lma ffffffff88010eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ec0
=>  Loading section .rdata, size 0x1ed4 lma ffffffff88010ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012da8
=>  Loading section .data, size 0x220 lma ffffffff88012dc0
=>  Start address ffffffff88000004
=>  Transfer rate: 622240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[582/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-userext.exe
Result: invalid   
Time: 0:00:00.263856 ts-userext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012680
=>  Loading section .init, size 0x48 lma ffffffff88012700
=>  Loading section .fini, size 0x30 lma ffffffff88012748
=>  Loading section .ctors, size 0x8 lma ffffffff88012778
=>  Loading section .dtors, size 0x8 lma ffffffff88012780
=>  Loading section .rdata, size 0x20fc lma ffffffff88012790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014890
=>  Loading section .data, size 0x268 lma ffffffff880148a8
=>  Start address ffffffff88000004
=>  Transfer rate: 677920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[583/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid   
Time: 0:00:00.259790 ts-validation-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014f30
=>  Loading section .init, size 0x48 lma ffffffff88014fb0
=>  Loading section .fini, size 0x30 lma ffffffff88014ff8
=>  Loading section .ctors, size 0x8 lma ffffffff88015028
=>  Loading section .dtors, size 0x8 lma ffffffff88015030
=>  Loading section .rdata, size 0x2430 lma ffffffff88015040
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017470
=>  Loading section .data, size 0x37c lma ffffffff88017488
=>  Start address ffffffff88000004
=>  Transfer rate: 770016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[584/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid   
Time: 0:00:00.261710 ts-validation-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880121f0
=>  Loading section .init, size 0x48 lma ffffffff88012270
=>  Loading section .fini, size 0x30 lma ffffffff880122b8
=>  Loading section .ctors, size 0x8 lma ffffffff880122e8
=>  Loading section .dtors, size 0x8 lma ffffffff880122f0
=>  Loading section .rdata, size 0xe3c0 lma ffffffff88012300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880206c0
=>  Loading section .data, size 0x268 lma ffffffff880206d8
=>  Start address ffffffff88000004
=>  Transfer rate: 1067456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[585/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid   
Time: 0:00:00.472897 ts-validation-acfg-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xdff0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff8800dff0
=>  Loading section .init, size 0x48 lma ffffffff8800e080
=>  Loading section .fini, size 0x30 lma ffffffff8800e0c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800e0f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800e100
=>  Loading section .rdata, size 0x1c5c lma ffffffff8800e110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800fd70
=>  Loading section .data, size 0x32c lma ffffffff8800fd88
=>  Start address ffffffff88000004
=>  Transfer rate: 525632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[586/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid   
Time: 0:00:00.257573 ts-validation-acfg-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcbf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800cbf0
=>  Loading section .init, size 0x48 lma ffffffff8800cc60
=>  Loading section .fini, size 0x30 lma ffffffff8800cca8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ccd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800cce0
=>  Loading section .rdata, size 0x1844 lma ffffffff8800ccf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e538
=>  Loading section .data, size 0x1cc lma ffffffff8800e550
=>  Start address ffffffff88000004
=>  Transfer rate: 473216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[587/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid   
Time: 0:00:00.471559 ts-validation-cache.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010b50
=>  Loading section .init, size 0x48 lma ffffffff88010bd0
=>  Loading section .fini, size 0x30 lma ffffffff88010c18
=>  Loading section .ctors, size 0x8 lma ffffffff88010c48
=>  Loading section .dtors, size 0x8 lma ffffffff88010c50
=>  Loading section .rdata, size 0x1d5c lma ffffffff88010c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129c0
=>  Loading section .data, size 0x254 lma ffffffff880129d8
=>  Start address ffffffff88000004
=>  Transfer rate: 614656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[588/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:579 W:0   | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid   
Time: 0:00:00.455479 ts-validation-intr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17010 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb0 lma ffffffff88017010
=>  Loading section .init, size 0x48 lma ffffffff880170c0
=>  Loading section .fini, size 0x30 lma ffffffff88017108
=>  Loading section .ctors, size 0x8 lma ffffffff88017138
=>  Loading section .dtors, size 0x8 lma ffffffff88017140
=>  Loading section .rdata, size 0x4380 lma ffffffff88017150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b4d0
=>  Loading section .data, size 0x410 lma ffffffff8801b4e8
=>  Start address ffffffff88000004
=>  Transfer rate: 903040 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[589/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid   
Time: 0:00:00.255925 ts-validation-io-kernel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8fe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88008fe0
=>  Loading section .init, size 0x48 lma ffffffff88009040
=>  Loading section .fini, size 0x30 lma ffffffff88009088
=>  Loading section .ctors, size 0x8 lma ffffffff880090b8
=>  Loading section .dtors, size 0x8 lma ffffffff880090c0
=>  Loading section .rdata, size 0x1728 lma ffffffff880090d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a7f8
=>  Loading section .data, size 0x7c lma ffffffff8800a810
=>  Start address ffffffff88000004
=>  Transfer rate: 345120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[590/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid   
Time: 0:00:00.256088 ts-validation-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x4a000 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x240 lma ffffffff8804a000
=>  Loading section .init, size 0x48 lma ffffffff8804a240
=>  Loading section .fini, size 0x30 lma ffffffff8804a288
=>  Loading section .ctors, size 0x8 lma ffffffff8804a2b8
=>  Loading section .dtors, size 0x8 lma ffffffff8804a2c0
=>  Loading section .rdata, size 0x19b8c lma ffffffff8804a2d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88063e60
=>  Loading section .data, size 0x1358 lma ffffffff88063e78
=>  Loading section .rtemsrwset, size 0x4 lma ffffffff880651d0
=>  Start address ffffffff88000004
=>  Transfer rate: 3313216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[591/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid   
Time: 0:00:00.273252 ts-validation-non-smp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010400
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1dd4 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e8
=>  Loading section .data, size 0x264 lma ffffffff88012300
=>  Start address ffffffff88000004
=>  Transfer rate: 600768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[592/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid   
Time: 0:00:00.256466 ts-validation-one-cpu-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b4a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xc0 lma ffffffff8801b4a0
=>  Loading section .init, size 0x48 lma ffffffff8801b560
=>  Loading section .fini, size 0x30 lma ffffffff8801b5a8
=>  Loading section .ctors, size 0x8 lma ffffffff8801b5d8
=>  Loading section .dtors, size 0x8 lma ffffffff8801b5e0
=>  Loading section .rdata, size 0x5f48 lma ffffffff8801b5f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021538
=>  Loading section .data, size 0x484 lma ffffffff88021550
=>  Start address ffffffff88000004
=>  Transfer rate: 1101408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[593/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid   
Time: 0:00:00.257615 ts-validation-one-cpu-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ba0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ba0
=>  Loading section .init, size 0x48 lma ffffffff88010c10
=>  Loading section .fini, size 0x30 lma ffffffff88010c58
=>  Loading section .ctors, size 0x8 lma ffffffff88010c88
=>  Loading section .dtors, size 0x8 lma ffffffff88010c90
=>  Loading section .rdata, size 0xe3b8 lma ffffffff88010ca0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f058
=>  Loading section .data, size 0x24c lma ffffffff8801f070
=>  Start address ffffffff88000004
=>  Transfer rate: 1021344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[594/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid   
Time: 0:00:00.268881 ts-validation-timecounter-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011bc0
=>  Loading section .init, size 0x48 lma ffffffff88011c30
=>  Loading section .fini, size 0x30 lma ffffffff88011c78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ca8
=>  Loading section .dtors, size 0x8 lma ffffffff88011cb0
=>  Loading section .rdata, size 0x23c8 lma ffffffff88011cc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014088
=>  Loading section .data, size 0x248 lma ffffffff880140a0
=>  Start address ffffffff88000004
=>  Transfer rate: 661248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[595/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid   
Time: 0:00:00.258244 ts-validation-timecounter-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013930
=>  Loading section .init, size 0x48 lma ffffffff880139b0
=>  Loading section .fini, size 0x30 lma ffffffff880139f8
=>  Loading section .ctors, size 0x8 lma ffffffff88013a28
=>  Loading section .dtors, size 0x8 lma ffffffff88013a30
=>  Loading section .rdata, size 0x1e64 lma ffffffff88013a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880158a8
=>  Loading section .data, size 0x2fc lma ffffffff880158c0
=>  Start address ffffffff88000004
=>  Transfer rate: 712064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[596/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:587 W:0   | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid   
Time: 0:00:00.253842 ts-validation-tls-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880103d0
=>  Loading section .init, size 0x48 lma ffffffff88010450
=>  Loading section .fini, size 0x30 lma ffffffff88010498
=>  Loading section .ctors, size 0x8 lma ffffffff880104c8
=>  Loading section .dtors, size 0x8 lma ffffffff880104d0
=>  Loading section .rdata, size 0x1d70 lma ffffffff880104e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012250
=>  Loading section .tdata, size 0x10 lma ffffffff88012300
=>  Loading section .data, size 0x254 lma ffffffff88012400
=>  Start address ffffffff88000004
=>  Transfer rate: 599584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[597/597] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:595 W:0   | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid   
Time: 0:00:00.251916 ts-validation-tls-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xa1b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800a1b0
=>  Loading section .init, size 0x48 lma ffffffff8800a230
=>  Loading section .fini, size 0x30 lma ffffffff8800a278
=>  Loading section .ctors, size 0x8 lma ffffffff8800a2a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800a2b0
=>  Loading section .rdata, size 0x1880 lma ffffffff8800a2c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bb40
=>  Loading section .tdata, size 0x10 lma ffffffff8800bc00
=>  Loading section .data, size 0x20c lma ffffffff8800bd00
=>  Start address ffffffff88000004
=>  Transfer rate: 387936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1

Passed:          1
Failed:          0
User Input:      0
Expected Fail:   0
Indeterminate:   0
Benchmark:       0
Timeout:         0
Test too long:   0
Invalid:       596
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         597
Invalid:
 sptasknopreempt01.exe
 block05.exe
 block15.exe
 sp08.exe
 paranoia.exe
 psxkey09.exe
 whetstone.exe
 psxtmrwlock01.exe
 termios.exe
 fsdosfsname02.exe
 psx13.exe
 spversion01.exe
 spclock_err02.exe
 mrfs_fsrename.exe
 block16.exe
 mimfs_fspermission.exe
 mdosfs_fserror.exe
 sptimer_err02.exe
 termios06.exe
 sp32.exe
 psxglobalcon02.exe
 tar01.exe
 spfatal10.exe
 heapwalk.exe
 psxclock01.exe
 sp71.exe
 psxtmmutex07.exe
 ts-userext.exe
 psxkey10.exe
 ts-validation-timecounter-1.exe
 psxtmcond02.exe
 tm31.exe
 tftpfs.exe
 psxcond01.exe
 block13.exe
 tm27.exe
 psxclockrealtime01.exe
 psxautoinit01.exe
 sp47.exe
 mdosfs_fsstatvfs.exe
 jffs2_fstime.exe
 psxtmcond06.exe
 ts-validation-acfg-0.exe
 imfs_fslink.exe
 sp74.exe
 mrfs_fstime.exe
 spcbssched02.exe
 sptimespec01.exe
 sparsedisk01.exe
 tm19.exe
 psxualarm.exe
 psxtmthread01.exe
 tm06.exe
 rbheap01.exe
 spconfig02.exe
 spcontext01.exe
 sp19.exe
 dl07.exe
 psxstrsignal01.exe
 spsem_err02.exe
 spmsgq_err01.exe
 block04.exe
 cdtest.exe
 spglobalcon02.exe
 psxid01.exe
 dumpbuf01.exe
 psxtmclocknanosleep01.exe
 psxfilelock01.exe
 psxtmmqrcvblock01.exe
 termios01.exe
 sp59.exe
 getentropy01.exe
 psxtmbarrier03.exe
 psxtmsem02.exe
 psx15.exe
 complex.exe
 psxstat.exe
 psxitimer.exe
 sptimecounter03.exe
 mimfs_fsscandir01.exe
 imfs_fssymlink.exe
 ttest01.exe
 sp03.exe
 dl01.exe
 spmsgq_err02.exe
 stringto01.exe
 sprmsched02.exe
 devnullfatal01.exe
 mdosfs_fsrdwr.exe
 sp24.exe
 mimfs_fssymlink.exe
 psxsignal08.exe
 pwdgrp01.exe
 psxstack01.exe
 psximfs01.exe
 psxtmmq01.exe
 exit02.exe
 spcache01.exe
 jffs2_fsrdwr.exe
 psxtmsem04.exe
 psxpasswd02.exe
 sprmsched01.exe
 sperror02.exe
 psxrwlock01.exe
 mimfs_fstime.exe
 sptls04.exe
 psxtmthread06.exe
 psxtmkey02.exe
 spconsole01.exe
 sp40.exe
 psxtmcleanup01.exe
 sptask_err02.exe
 psxalarm01.exe
 top.exe
 spcbssched01.exe
 psxconfstr.exe
 mimfs_fslink.exe
 psxtmthread05.exe
 sp20.exe
 psxtmbarrier01.exe
 spcpucounter01.exe
 mouse01.exe
 spsimplesched03.exe
 sp49.exe
 psxthreadname01.exe
 sp75.exe
 psxcancel.exe
 psx10.exe
 spfatal33.exe
 sperror01.exe
 psxtmmutexattr01.exe
 sp77.exe
 psxconcurrency01.exe
 psxtmthread04.exe
 pwdgrp02.exe
 tm25.exe
 psx11.exe
 spedfsched04.exe
 psxtmrwlock07.exe
 fsclose01.exe
 spfatal14.exe
 tm08.exe
 psxtmsem03.exe
 speventsystem01.exe
 psxstack02.exe
 ts-validation-timecounter-0.exe
 fileio.exe
 tmtimer01.exe
 sp27.exe
 psxtmmutex04.exe
 jffs2_fssymlink.exe
 psxtmcond05.exe
 psxcancel01.exe
 psxautoinit02.exe
 block03.exe
 rhtaskswitch.exe
 psxtmmutex05.exe
 termios04.exe
 ts-validation-tls-1.exe
 psx02.exe
 psxtmsleep01.exe
 psxclassic01.exe
 spatomic01.exe
 sp07.exe
 tm35.exe
 spfifo01.exe
 termios07.exe
 psxfile02.exe
 mimfs_fsrename.exe
 psxsignal03.exe
 rcxx01.exe
 spprintk.exe
 linpack.exe
 spchain.exe
 sp68.exe
 psxsem01.exe
 psxmutexattr01.exe
 dl04.exe
 sp60.exe
 sp45.exe
 mrfs_fsrdwr.exe
 sp72.exe
 spprivenv01.exe
 sp34.exe
 irqs01.exe
 block17.exe
 spedfsched02.exe
 spstdthreads01.exe
 sha.exe
 ts-validation-one-cpu-0.exe
 md501.exe
 psxkey02.exe
 fsnofs01.exe
 tm11.exe
 sp55.exe
 termios09.exe
 mrfs_fssymlink.exe
 tm15.exe
 sp15.exe
 ts-validation-one-cpu-1.exe
 spfatal15.exe
 tar02.exe
 sp29.exe
 psxsignal05.exe
 tztest.exe
 psxgetattrnp01.exe
 sptask_err03.exe
 psxtimer01.exe
 psxtmthread03.exe
 psxaio02.exe
 psxspin01.exe
 fsimfsconfig03.exe
 bspcmdline01.exe
 imfs_fspatheval.exe
 tm24.exe
 mathf.exe
 spfreechain01.exe
 jffs2_fspatheval.exe
 spstkalloc03.exe
 psxtime.exe
 fsdosfswrite01.exe
 fsdosfssync01.exe
 tmcontext01.exe
 psxcleanup.exe
 psxtmcond04.exe
 psxkey05.exe
 sp37.exe
 ts-terminate.exe
 capture01.exe
 tm17.exe
 spfifo05.exe
 psxinttypes01.exe
 malloc02.exe
 psxtmsem05.exe
 spclock_err01.exe
 psxtmmutex02.exe
 fsdosfsformat01.exe
 sp23.exe
 psx05.exe
 psxmsgq01.exe
 mrfs_fserror.exe
 ts-performance-no-clock-0.exe
 ts-validation-acfg-1.exe
 spport_err01.exe
 psxtmsem01.exe
 block02.exe
 tm01.exe
 psxchroot01.exe
 sp63.exe
 spprofiling01.exe
 psxtmrwlock05.exe
 uid01.exe
 psx03.exe
 tmfine01.exe
 mdosfs_fstime.exe
 malloctest.exe
 psxmmap01.exe
 cpuuse.exe
 sp62.exe
 psxdevctl01.exe
 spfatal28.exe
 ticker.exe
 block07.exe
 sp31.exe
 psxmsgq03.exe
 psxmsgq02.exe
 mimfs_fsrdwr.exe
 sp41.exe
 tm36.exe
 spfatal12.exe
 imfs_fstime.exe
 jffs2_fslink.exe
 termios03.exe
 malloc03.exe
 psxsignal02.exe
 sp65.exe
 psxobj01.exe
 psxfile01.exe
 psxeintr_join.exe
 spinternalerror01.exe
 termios08.exe
 mdosfs_fspatheval.exe
 fsimfsconfig01.exe
 spsem03.exe
 spfatal05.exe
 psxtmrwlock03.exe
 tm13.exe
 psxkey06.exe
 sppartition_err01.exe
 jffs2_fspermission.exe
 sp11.exe
 sp17.exe
 dl09.exe
 spedfsched01.exe
 spfatal01.exe
 sp70.exe
 psxfchx01.exe
 sptimecounter01.exe
 fsrofs01.exe
 record01.exe
 psxglobalcon01.exe
 psxtmkey01.exe
 psxtmonce01.exe
 ts-validation-non-smp.exe
 sprbtree01.exe
 spthreadq01.exe
 sppagesize.exe
 spfatal30.exe
 psx04.exe
 fsrfsbitmap01.exe
 psxtmmutex03.exe
 mrfs_fspermission.exe
 tm33.exe
 tmonetoone.exe
 psxtmmqrcvblock02.exe
 sp56.exe
 tm28.exe
 jffs2_fserror.exe
 psx07.exe
 tm07.exe
 fsjffs2gc01.exe
 sp33.exe
 sptask_err01.exe
 sp76.exe
 i2c01.exe
 nsecs.exe
 tm20.exe
 sptls03.exe
 psxtmmutex06.exe
 spconfig01.exe
 psxtmrwlock06.exe
 psx01.exe
 spstkalloc.exe
 sp12.exe
 spheapprot.exe
 spsyslock01.exe
 psxtmnanosleep02.exe
 psxtmclocknanosleep02.exe
 spsimplesched01.exe
 psxrdwrv.exe
 psxtmthread02.exe
 spsignal_err01.exe
 fsimfsgeneric01.exe
 spmkdir.exe
 spwkspace.exe
 mrfs_fslink.exe
 psxgetrusage01.exe
 sp2038.exe
 spsimplesched02.exe
 sp25.exe
 sp35.exe
 sptask_err04.exe
 rhilatency.exe
 psxkey07.exe
 sp43.exe
 dl06.exe
 sp18.exe
 spfatal09.exe
 jffs2_fsscandir01.exe
 tm22.exe
 imfs_fsrdwr.exe
 sp01.exe
 spi01.exe
 psxfatal02.exe
 ts-unit-no-clock-0.exe
 libfdt01.exe
 dl02.exe
 sp26.exe
 psxfenv01.exe
 stackchk.exe
 tm09.exe
 sptimecounter02.exe
 spfatal11.exe
 psx14.exe
 spfifo04.exe
 sp57.exe
 block12.exe
 tm30.exe
 stackchk02.exe
 psxndbm01.exe
 spcpuset01.exe
 tm14.exe
 mrfs_fsfpathconf.exe
 psxtmcond01.exe
 sp13.exe
 iostream.exe
 rtmonuse.exe
 spstkalloc02.exe
 psxfatal01.exe
 psxtmthreadattr01.exe
 sptls01.exe
 psxkey01.exe
 spratemon_err01.exe
 spntp01.exe
 putenvtest.exe
 psxshm02.exe
 psxtmclocknanosleep03.exe
 psxaio01.exe
 ts-fatal-too-large-tls-size.exe
 block09.exe
 psxbarrier01.exe
 spregion_err01.exe
 unlimited.exe
 psxtmcond09.exe
 mdosfs_fsscandir01.exe
 sp21.exe
 psxkey03.exe
 mimfs_fserror.exe
 psxpipe01.exe
 ts-validation-io-kernel.exe
 psxconfig01.exe
 spcbssched03.exe
 sp50.exe
 psxtmcond10.exe
 psxtmbarrierattr01.exe
 deviceio01.exe
 block11.exe
 psxmsgq04.exe
 sp69.exe
 spclock_todhook01.exe
 spfifo02.exe
 spthread01.exe
 sp42.exe
 sp02.exe
 dl10.exe
 spfatal29.exe
 spfatal31.exe
 psxshm01.exe
 sp30.exe
 monitor.exe
 sp14.exe
 tm10.exe
 spmountmgr01.exe
 rhsemshuffle.exe
 ts-validation-1.exe
 psxsignal06.exe
 fsfseeko01.exe
 block10.exe
 termios05.exe
 spsize.exe
 tm03.exe
 rhtaskpreempt.exe
 exit03.exe
 psxtmbarrier04.exe
 sp52.exe
 sp06.exe
 sptimecounter04.exe
 spthreadlife01.exe
 devfs01.exe
 spsem_err01.exe
 ts-validation-intr.exe
 psxcleanup01.exe
 defaultconfig01.exe
 psxsignal07.exe
 spobjgetnext.exe
 psxftw01.exe
 ts-validation-tls-0.exe
 termios10.exe
 imfs_fspermission.exe
 fsimfsconfig02.exe
 psx06.exe
 tm05.exe
 devfs04.exe
 rhmlatency.exe
 psxtmmutex01.exe
 sptimerserver01.exe
 spedfsched03.exe
 psxcleanup02.exe
 psx08.exe
 psx09.exe
 sp46.exe
 sp54.exe
 tar03.exe
 base_sp.exe
 dl03.exe
 rhdeadlockbrk.exe
 spintr_err01.exe
 spmisc01.exe
 spfatal03.exe
 psxenosys.exe
 sp48.exe
 fsdosfsname01.exe
 spmutex01.exe
 psxsignal04.exe
 spevent_err03.exe
 spsysinit01.exe
 block08.exe
 spfatal32.exe
 mimfs_fspatheval.exe
 block14.exe
 stackchk01.exe
 spfifo03.exe
 dhrystone.exe
 mathl.exe
 spassoc01.exe
 math.exe
 psxtimer02.exe
 tm02.exe
 sptls02.exe
 psx16.exe
 spscheduler01.exe
 sppps01.exe
 spwatchdog.exe
 ttest02.exe
 tmck.exe
 spcxx01.exe
 tm21.exe
 shell01.exe
 sp66.exe
 psxkey08.exe
 tm16.exe
 splinkersets01.exe
 sppercpudata01.exe
 psxcond02.exe
 tm34.exe
 sp73.exe
 psxtmcond03.exe
 sp27a.exe
 tm12.exe
 sp04.exe
 spfatal34.exe
 tm18.exe
 sp53.exe
 flashdisk01.exe
 psx12.exe
 psxtmbarrier02.exe
 spsem02.exe
 psxkey04.exe
 sp67.exe
 sp51.exe
 sperror03.exe
 imfs_fsscandir01.exe
 spmrsp01.exe
 psxreaddir.exe
 mrfs_fspatheval.exe
 malloc04.exe
 tm23.exe
 block06.exe
 ts-validation-no-clock-0.exe
 sp22.exe
 exit01.exe
 record02.exe
 utf8proc01.exe
 sp44.exe
 dl08.exe
 sp16.exe
 crypt01.exe
 spqreslib.exe
 psxtmsleep02.exe
 tm32.exe
 spnsext01.exe
 capture.exe
 spsem01.exe
 imfs_fserror.exe
 tm26.exe
 psxonce01.exe
 psxsysconf.exe
 sp58.exe
 sp05.exe
 newlib01.exe
 spglobalcon01.exe
 spinternalerror02.exe
 psxclock.exe
 spextensions01.exe
 sp64.exe
 psxaio03.exe
 psxpasswd01.exe
 psxsignal01.exe
 ofw01.exe
 psxmount.exe
 psxtmcond08.exe
 psxtimes01.exe
 psximfs02.exe
 hello.exe
 termios11.exe
 ts-validation-cache.exe
 mrfs_fsscandir01.exe
 psxtmrwlock02.exe
 spfatal04.exe
 ts-validation-0.exe
 tm29.exe
 psxtmcond07.exe
 psxtmrwlock04.exe
 psxtmnanosleep01.exe
 speventtransient01.exe
 dl05.exe
 block01.exe
 spstkalloc04.exe
 sp38.exe
 termios02.exe
 ts-fatal-init-task-construct-failed.exe
 monitor02.exe
 psxusleep.exe
 sptimer_err01.exe
 fsbdpart01.exe
 tm04.exe
Average test time: 0:00:00.073048
Testing time     : 0:00:43.609716