Build Linux: FAILED devel/qemu on x86_64-linux-gnu (qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1)
OAR Tester
rtems-tester at oarcorp.com
Sat Mar 5 11:09:23 UTC 2022
RTEMS Source Builder - Set Builder, 5 (52ca7d38aae2)
Host: Linux-5.11.0-49-generic-x86_64-with-Ubuntu-21.04-hirsute
Linux VM-Ubuntu21.rtems.com 5.11.0-49-generic #55-Ubuntu SMP Wed Jan 12
17:36:34 UTC 2022 x86_64 x86_64
Build Time: 0:04:26.001075
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
268 | virtio_tswap32s(VIRTIO_DEVICE(s), &req->req.tmf.subtype);
| ^~~~~~~~~~~~~~~~~~~~~
CC aarch64-softmmu/hw/display/vga.o
CC i386-softmmu/hw/i386/multiboot.o
LINK cris-softmmu/qemu-system-cris
CC i386-softmmu/hw/i386/smbios.o
CC m68k-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC m68k-softmmu/hw/scsi/vhost-scsi.o
CC aarch64-softmmu/hw/dma/omap_dma.o
CC aarch64-softmmu/hw/dma/soc_dma.o
CC m68k-softmmu/hw/vfio/common.o
CC arm-softmmu/hw/dma/soc_dma.o
CC arm-softmmu/hw/dma/pxa2xx_dma.o
CC alpha-softmmu/target-alpha/helper.o
CC aarch64-softmmu/hw/dma/pxa2xx_dma.o
CC m68k-softmmu/hw/vfio/pci.o
CC i386-softmmu/hw/i386/pc.o
CC i386-softmmu/hw/i386/pc_piix.o
CC m68k-softmmu/hw/virtio/virtio.o
CC alpha-softmmu/target-alpha/cpu.o
CC aarch64-softmmu/hw/gpio/omap_gpio.o
CC arm-softmmu/hw/gpio/omap_gpio.o
CC aarch64-softmmu/hw/i2c/omap_i2c.o
CC alpha-softmmu/target-alpha/int_helper.o
CC i386-softmmu/hw/i386/pc_q35.o
CC aarch64-softmmu/hw/input/pxa2xx_keypad.o
CC arm-softmmu/hw/i2c/omap_i2c.o
CC aarch64-softmmu/hw/input/tsc210x.o
CC m68k-softmmu/hw/virtio/virtio-balloon.o
CC alpha-softmmu/target-alpha/fpu_helper.o
CC i386-softmmu/hw/i386/pc_sysfw.o
CC i386-softmmu/hw/i386/intel_iommu.o
CC arm-softmmu/hw/input/pxa2xx_keypad.o
CC aarch64-softmmu/hw/intc/armv7m_nvic.o
CC i386-softmmu/hw/i386/kvmvapic.o
CC m68k-softmmu/hw/virtio/vhost.o
CC alpha-softmmu/target-alpha/vax_helper.o
CC arm-softmmu/hw/input/tsc210x.o
CP i386-softmmu/hw/i386/acpi-dsdt.hex
CP i386-softmmu/hw/i386/q35-acpi-dsdt.hex
CP i386-softmmu/hw/i386/ssdt-tpm.hex
CC aarch64-softmmu/hw/intc/exynos4210_gic.o
CP i386-softmmu/hw/i386/ssdt-tpm2.hex
CC i386-softmmu/hw/i386/kvm/clock.o
CC i386-softmmu/hw/i386/kvm/apic.o
CC i386-softmmu/hw/i386/kvm/i8259.o
CC m68k-softmmu/hw/virtio/vhost-backend.o
CC alpha-softmmu/target-alpha/sys_helper.o
CC aarch64-softmmu/hw/intc/exynos4210_combiner.o
CC i386-softmmu/hw/i386/kvm/ioapic.o
CC i386-softmmu/hw/i386/kvm/i8254.o
CC i386-softmmu/hw/i386/kvm/pci-assign.o
CC alpha-softmmu/target-alpha/mem_helper.o
CC m68k-softmmu/hw/virtio/vhost-user.o
CC arm-softmmu/hw/intc/armv7m_nvic.o
CC aarch64-softmmu/hw/intc/omap_intc.o
CC i386-softmmu/target-i386/translate.o
CC i386-softmmu/target-i386/helper.o
CC i386-softmmu/target-i386/cpu.o
CC alpha-softmmu/target-alpha/gdbstub.o
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c: In function 'assign_failed_examine':
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:747:37: warning: 'driver' directive output may be truncated writing 6 bytes into a region of size between 1 and 4096 [-Wformat-truncation=]
747 | snprintf(name, sizeof(name), "%sdriver", dir);
| ^~~~~~
In file included from /usr/include/stdio.h:866,
from /home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:23:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:71:10: note: '__builtin___snprintf_chk' output between 7 and 4102 bytes into a destination of size 4096
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
CC m68k-softmmu/hw/virtio/dataplane/vring.o
CC arm-softmmu/hw/intc/exynos4210_gic.o
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c: In function 'get_real_device.constprop':
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:552:37: warning: 'config' directive output may be truncated writing 6 bytes into a region of size between 1 and 128 [-Wformat-truncation=]
552 | snprintf(name, sizeof(name), "%sconfig", dir);
| ^~~~~~
In file included from /usr/include/stdio.h:866,
from /home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:23:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:71:10: note: '__builtin___snprintf_chk' output between 7 and 134 bytes into a destination of size 128
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:595:37: warning: 'resource' directive output may be truncated writing 8 bytes into a region of size between 1 and 128 [-Wformat-truncation=]
595 | snprintf(name, sizeof(name), "%sresource", dir);
| ^~~~~~~~
In file included from /usr/include/stdio.h:866,
from /home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:23:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:71:10: note: '__builtin___snprintf_chk' output between 9 and 136 bytes into a destination of size 128
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:623:41: warning: 'resource' directive output may be truncated writing 8 bytes into a region of size between 1 and 128 [-Wformat-truncation=]
623 | snprintf(name, sizeof(name), "%sresource%d", dir, r);
| ^~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:623:38: note: directive argument in the range [0, 5]
623 | snprintf(name, sizeof(name), "%sresource%d", dir, r);
| ^~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:866,
from /home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/i386/kvm/pci-assign.c:23:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:71:10: note: '__builtin___snprintf_chk' output between 10 and 137 bytes into a destination of size 128
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
GEN trace/generated-helpers.c
CC aarch64-softmmu/hw/intc/allwinner-a10-pic.o
CC i386-softmmu/target-i386/excp_helper.o
CC alpha-softmmu/trace/generated-helpers.o
CC arm-softmmu/hw/intc/exynos4210_combiner.o
CC aarch64-softmmu/hw/misc/arm_sysctl.o
CC m68k-softmmu/hw/m68k/an5206.o
CC i386-softmmu/target-i386/fpu_helper.o
CC i386-softmmu/target-i386/cc_helper.o
LINK alpha-softmmu/qemu-system-alpha
CC m68k-softmmu/hw/m68k/mcf5208.o
CC arm-softmmu/hw/intc/omap_intc.o
CC aarch64-softmmu/hw/misc/cbus.o
CC i386-softmmu/target-i386/int_helper.o
CC i386-softmmu/target-i386/svm_helper.o
CC m68k-softmmu/hw/m68k/dummy_m68k.o
CC m68k-softmmu/hw/m68k/mcf5206.o
CC aarch64-softmmu/hw/misc/exynos4210_pmu.o
CC arm-softmmu/hw/intc/allwinner-a10-pic.o
CC i386-softmmu/target-i386/smm_helper.o
CC i386-softmmu/target-i386/misc_helper.o
CC aarch64-softmmu/hw/misc/imx_ccm.o
CC arm-softmmu/hw/misc/arm_sysctl.o
CC m68k-softmmu/hw/m68k/mcf_intc.o
CC i386-softmmu/target-i386/mem_helper.o
CC i386-softmmu/target-i386/seg_helper.o
CC aarch64-softmmu/hw/misc/mst_fpga.o
CC m68k-softmmu/target-m68k/m68k-semi.o
CC aarch64-softmmu/hw/misc/omap_clk.o
CC arm-softmmu/hw/misc/cbus.o
CC aarch64-softmmu/hw/misc/omap_gpmc.o
CC i386-softmmu/target-i386/gdbstub.o
CC arm-softmmu/hw/misc/exynos4210_pmu.o
CC aarch64-softmmu/hw/misc/omap_l4.o
CC m68k-softmmu/target-m68k/translate.o
CC i386-softmmu/target-i386/machine.o
CC arm-softmmu/hw/misc/imx_ccm.o
CC aarch64-softmmu/hw/misc/omap_sdrc.o
CC aarch64-softmmu/hw/misc/omap_tap.o
CC i386-softmmu/target-i386/arch_memory_mapping.o
CC arm-softmmu/hw/misc/mst_fpga.o
CC aarch64-softmmu/hw/misc/zynq_slcr.o
CC arm-softmmu/hw/misc/omap_clk.o
CC i386-softmmu/target-i386/arch_dump.o
CC arm-softmmu/hw/misc/omap_gpmc.o
CC aarch64-softmmu/hw/misc/stm32f2xx_syscfg.o
CC arm-softmmu/hw/misc/omap_l4.o
CC i386-softmmu/target-i386/kvm.o
CC aarch64-softmmu/hw/misc/edu.o
GEN trace/generated-helpers.c
CC i386-softmmu/hw/i386/acpi-build.o
CC arm-softmmu/hw/misc/omap_sdrc.o
CC arm-softmmu/hw/misc/omap_tap.o
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c: In function 'kvm_arch_init_vcpu':
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:481:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
481 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:489:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
489 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:497:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
497 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:502:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
502 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:519:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
519 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:529:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
529 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:540:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
540 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:547:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
547 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:565:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
565 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:584:21: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
584 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:617:21: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
617 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:653:13: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
653 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:669:17: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
669 | c = &cpuid_data.entries[cpuid_i++];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:709:26: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
709 | c = cpuid_find_entry(&cpuid_data.cpuid, 1, 0);
| ^~~~~~~~~~~~~~~~~
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/target-i386/kvm.c:715:26: warning: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Waddress-of-packed-member]
715 | c = cpuid_find_entry(&cpuid_data.cpuid, 0x80000007, 0);
| ^~~~~~~~~~~~~~~~~
CC aarch64-softmmu/hw/net/virtio-net.o
CC i386-softmmu/trace/generated-helpers.o
CC arm-softmmu/hw/misc/zynq_slcr.o
CC m68k-softmmu/target-m68k/op_helper.o
CC arm-softmmu/hw/misc/stm32f2xx_syscfg.o
CC m68k-softmmu/target-m68k/helper.o
CC m68k-softmmu/target-m68k/cpu.o
CC m68k-softmmu/target-m68k/gdbstub.o
CC arm-softmmu/hw/misc/edu.o
CC aarch64-softmmu/hw/net/vhost_net.o
GEN trace/generated-helpers.c
CC m68k-softmmu/gdbstub-xml.o
CC arm-softmmu/hw/net/virtio-net.o
CC m68k-softmmu/trace/generated-helpers.o
CC arm-softmmu/hw/net/vhost_net.o
CC arm-softmmu/hw/pcmcia/pxa2xx.o
CC arm-softmmu/hw/scsi/virtio-scsi.o
CC arm-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC aarch64-softmmu/hw/pcmcia/pxa2xx.o
CC arm-softmmu/hw/scsi/vhost-scsi.o
LINK m68k-softmmu/qemu-system-m68k
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/scsi/virtio-scsi.c: In function 'virtio_scsi_do_tmf':
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/scsi/virtio-scsi.c:268:39: warning: taking address of packed member of 'struct virtio_scsi_ctrl_tmf_req' may result in an unaligned pointer value [-Waddress-of-packed-member]
268 | virtio_tswap32s(VIRTIO_DEVICE(s), &req->req.tmf.subtype);
| ^~~~~~~~~~~~~~~~~~~~~
CC arm-softmmu/hw/sd/omap_mmc.o
CC arm-softmmu/hw/sd/pxa2xx_mmci.o
CC aarch64-softmmu/hw/scsi/virtio-scsi.o
CC arm-softmmu/hw/ssi/omap_spi.o
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/scsi/virtio-scsi.c: In function 'virtio_scsi_do_tmf':
/home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144/hw/scsi/virtio-scsi.c:268:39: warning: taking address of packed member of 'struct virtio_scsi_ctrl_tmf_req' may result in an unaligned pointer value [-Waddress-of-packed-member]
268 | virtio_tswap32s(VIRTIO_DEVICE(s), &req->req.tmf.subtype);
| ^~~~~~~~~~~~~~~~~~~~~
CC arm-softmmu/hw/timer/exynos4210_mct.o
CC arm-softmmu/hw/timer/exynos4210_pwm.o
CC arm-softmmu/hw/timer/exynos4210_rtc.o
CC arm-softmmu/hw/timer/omap_gptimer.o
CC arm-softmmu/hw/timer/omap_synctimer.o
CC arm-softmmu/hw/timer/pxa2xx_timer.o
CC aarch64-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC arm-softmmu/hw/timer/tusb6010.o
CC arm-softmmu/hw/timer/digic-timer.o
CC arm-softmmu/hw/timer/allwinner-a10-pit.o
CC arm-softmmu/hw/vfio/common.o
CC aarch64-softmmu/hw/scsi/vhost-scsi.o
CC arm-softmmu/hw/vfio/pci.o
CC arm-softmmu/hw/virtio/virtio.o
CC arm-softmmu/hw/virtio/virtio-balloon.o
CC arm-softmmu/hw/virtio/vhost.o
CC arm-softmmu/hw/virtio/vhost-backend.o
CC aarch64-softmmu/hw/sd/omap_mmc.o
CC arm-softmmu/hw/virtio/vhost-user.o
CC arm-softmmu/hw/virtio/dataplane/vring.o
CC arm-softmmu/hw/arm/boot.o
CC arm-softmmu/hw/arm/collie.o
CC aarch64-softmmu/hw/sd/pxa2xx_mmci.o
CC arm-softmmu/hw/arm/exynos4_boards.o
CC arm-softmmu/hw/arm/gumstix.o
CC arm-softmmu/hw/arm/highbank.o
CC arm-softmmu/hw/arm/digic_boards.o
CC arm-softmmu/hw/arm/integratorcp.o
CC arm-softmmu/hw/arm/kzm.o
CC arm-softmmu/hw/arm/mainstone.o
CC aarch64-softmmu/hw/ssi/omap_spi.o
CC arm-softmmu/hw/arm/musicpal.o
CC arm-softmmu/hw/arm/nseries.o
CC arm-softmmu/hw/arm/omap_sx1.o
CC arm-softmmu/hw/arm/palm.o
CC arm-softmmu/hw/arm/realview.o
CC arm-softmmu/hw/arm/spitz.o
CC aarch64-softmmu/hw/timer/exynos4210_mct.o
CC arm-softmmu/hw/arm/stellaris.o
CC arm-softmmu/hw/arm/tosa.o
CC arm-softmmu/hw/arm/versatilepb.o
CC arm-softmmu/hw/arm/vexpress.o
CC arm-softmmu/hw/arm/virt.o
CC arm-softmmu/hw/arm/xilinx_zynq.o
CC aarch64-softmmu/hw/timer/exynos4210_pwm.o
CC arm-softmmu/hw/arm/z2.o
CC arm-softmmu/hw/arm/virt-acpi-build.o
CC arm-softmmu/hw/arm/netduino2.o
CC arm-softmmu/hw/arm/armv7m.o
CC arm-softmmu/hw/arm/exynos4210.o
CC aarch64-softmmu/hw/timer/exynos4210_rtc.o
CC arm-softmmu/hw/arm/pxa2xx.o
CC arm-softmmu/hw/arm/pxa2xx_gpio.o
CC arm-softmmu/hw/arm/pxa2xx_pic.o
CC arm-softmmu/hw/arm/digic.o
CC arm-softmmu/hw/arm/omap1.o
CC arm-softmmu/hw/arm/omap2.o
CC aarch64-softmmu/hw/timer/omap_gptimer.o
CC arm-softmmu/hw/arm/strongarm.o
CC arm-softmmu/hw/arm/allwinner-a10.o
CC arm-softmmu/hw/arm/cubieboard.o
CC arm-softmmu/hw/arm/stm32f205_soc.o
CC arm-softmmu/target-arm/arm-semi.o
CC arm-softmmu/target-arm/machine.o
CC aarch64-softmmu/hw/timer/omap_synctimer.o
LINK i386-softmmu/qemu-system-i386
CC arm-softmmu/target-arm/kvm-stub.o
CC arm-softmmu/target-arm/translate.o
CC aarch64-softmmu/hw/timer/pxa2xx_timer.o
CC arm-softmmu/target-arm/op_helper.o
CC arm-softmmu/target-arm/helper.o
CC arm-softmmu/target-arm/cpu.o
CC arm-softmmu/target-arm/neon_helper.o
CC aarch64-softmmu/hw/timer/tusb6010.o
CC arm-softmmu/target-arm/iwmmxt_helper.o
CC aarch64-softmmu/hw/timer/digic-timer.o
CC aarch64-softmmu/hw/timer/allwinner-a10-pit.o
CC arm-softmmu/target-arm/gdbstub.o
CC arm-softmmu/target-arm/psci.o
CC aarch64-softmmu/hw/vfio/common.o
CC aarch64-softmmu/hw/vfio/pci.o
CC arm-softmmu/target-arm/crypto_helper.o
GEN trace/generated-helpers.c
CC arm-softmmu/gdbstub-xml.o
CC arm-softmmu/trace/generated-helpers.o
CC aarch64-softmmu/hw/virtio/virtio.o
CC aarch64-softmmu/hw/virtio/virtio-balloon.o
CC aarch64-softmmu/hw/virtio/vhost.o
CC aarch64-softmmu/hw/virtio/vhost-backend.o
CC aarch64-softmmu/hw/virtio/vhost-user.o
CC aarch64-softmmu/hw/virtio/dataplane/vring.o
CC aarch64-softmmu/hw/arm/boot.o
CC aarch64-softmmu/hw/arm/collie.o
CC aarch64-softmmu/hw/arm/exynos4_boards.o
CC aarch64-softmmu/hw/arm/gumstix.o
CC aarch64-softmmu/hw/arm/highbank.o
CC aarch64-softmmu/hw/arm/digic_boards.o
CC aarch64-softmmu/hw/arm/integratorcp.o
CC aarch64-softmmu/hw/arm/kzm.o
CC aarch64-softmmu/hw/arm/mainstone.o
CC aarch64-softmmu/hw/arm/musicpal.o
CC aarch64-softmmu/hw/arm/nseries.o
CC aarch64-softmmu/hw/arm/omap_sx1.o
CC aarch64-softmmu/hw/arm/palm.o
CC aarch64-softmmu/hw/arm/realview.o
CC aarch64-softmmu/hw/arm/spitz.o
CC aarch64-softmmu/hw/arm/stellaris.o
CC aarch64-softmmu/hw/arm/tosa.o
CC aarch64-softmmu/hw/arm/versatilepb.o
CC aarch64-softmmu/hw/arm/vexpress.o
CC aarch64-softmmu/hw/arm/virt.o
CC aarch64-softmmu/hw/arm/xilinx_zynq.o
CC aarch64-softmmu/hw/arm/z2.o
CC aarch64-softmmu/hw/arm/virt-acpi-build.o
CC aarch64-softmmu/hw/arm/netduino2.o
CC aarch64-softmmu/hw/arm/armv7m.o
CC aarch64-softmmu/hw/arm/exynos4210.o
CC aarch64-softmmu/hw/arm/pxa2xx.o
CC aarch64-softmmu/hw/arm/pxa2xx_gpio.o
CC aarch64-softmmu/hw/arm/pxa2xx_pic.o
CC aarch64-softmmu/hw/arm/digic.o
CC aarch64-softmmu/hw/arm/omap1.o
CC aarch64-softmmu/hw/arm/omap2.o
CC aarch64-softmmu/hw/arm/strongarm.o
CC aarch64-softmmu/hw/arm/allwinner-a10.o
CC aarch64-softmmu/hw/arm/cubieboard.o
CC aarch64-softmmu/hw/arm/stm32f205_soc.o
CC aarch64-softmmu/hw/arm/xlnx-zynqmp.o
CC aarch64-softmmu/hw/arm/xlnx-ep108.o
CC aarch64-softmmu/target-arm/arm-semi.o
CC aarch64-softmmu/target-arm/machine.o
CC aarch64-softmmu/target-arm/kvm-stub.o
CC aarch64-softmmu/target-arm/translate.o
CC aarch64-softmmu/target-arm/op_helper.o
CC aarch64-softmmu/target-arm/helper.o
CC aarch64-softmmu/target-arm/cpu.o
CC aarch64-softmmu/target-arm/neon_helper.o
CC aarch64-softmmu/target-arm/iwmmxt_helper.o
CC aarch64-softmmu/target-arm/gdbstub.o
CC aarch64-softmmu/target-arm/psci.o
CC aarch64-softmmu/target-arm/cpu64.o
CC aarch64-softmmu/target-arm/translate-a64.o
CC aarch64-softmmu/target-arm/helper-a64.o
CC aarch64-softmmu/target-arm/gdbstub64.o
CC aarch64-softmmu/target-arm/crypto_helper.o
GEN trace/generated-helpers.c
CC aarch64-softmmu/gdbstub-xml.o
CC aarch64-softmmu/trace/generated-helpers.o
LINK arm-softmmu/qemu-system-arm
LINK aarch64-softmmu/qemu-system-aarch64
shell cmd failed: /bin/sh -ex /home/tester/rtems-cron-5/rtems-source-builder/bare/build/qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1/do-build
error: building qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1
See error report: rsb-report-qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output
======
Build Set: devel/qemu
Build Set: devel/autotools-internal.bset
config: devel/autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
sizes: autoconf-2.69-x86_64-linux-gnu-1: 7.498MB (installed: 0.000B)
cleaning: autoconf-2.69-x86_64-linux-gnu-1
config: devel/automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
sizes: automake-1.12.6-x86_64-linux-gnu-1: 8.096MB (installed: 0.000B)
cleaning: automake-1.12.6-x86_64-linux-gnu-1
config: devel/libtool-2.4.2-1.cfg
package: libtool-2.4.2-x86_64-linux-gnu-1
building: libtool-2.4.2-x86_64-linux-gnu-1
sizes: libtool-2.4.2-x86_64-linux-gnu-1: 12.776MB (installed: 0.000B)
cleaning: libtool-2.4.2-x86_64-linux-gnu-1
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
cleaning: libtool-2.4.2-x86_64-linux-gnu-1
Build Sizes: usage: 12.776MB total: 334.494MB (sources: 334.454MB, patches: 41.158KB, installed 0.000B)
Build Set: Time 0:00:11.882834
config: devel/libiconv-1.14-1.cfg
config: devel/gettext-0.18.3.1-1.cfg
package: gettext-0.18.3.1-x86_64-linux-gnu-1
building: gettext-0.18.3.1-x86_64-linux-gnu-1
sizes: gettext-0.18.3.1-x86_64-linux-gnu-1: 181.892MB (installed: 23.388MB)
cleaning: gettext-0.18.3.1-x86_64-linux-gnu-1
reporting: devel/gettext-0.18.3.1-1.cfg -> gettext-0.18.3.1-x86_64-linux-gnu-1.txt
reporting: devel/gettext-0.18.3.1-1.cfg -> gettext-0.18.3.1-x86_64-linux-gnu-1.xml
config: devel/libffi-3.0.13-1.cfg
package: libffi-3.0.13-x86_64-linux-gnu-1
building: libffi-3.0.13-x86_64-linux-gnu-1
sizes: libffi-3.0.13-x86_64-linux-gnu-1: 6.606MB (installed: 644.934KB)
cleaning: libffi-3.0.13-x86_64-linux-gnu-1
reporting: devel/libffi-3.0.13-1.cfg -> libffi-3.0.13-x86_64-linux-gnu-1.txt
reporting: devel/libffi-3.0.13-1.cfg -> libffi-3.0.13-x86_64-linux-gnu-1.xml
config: devel/pixman-0.40.0-1.cfg
package: pixman-0.40.0-x86_64-linux-gnu-1
building: pixman-0.40.0-x86_64-linux-gnu-1
sizes: pixman-0.40.0-x86_64-linux-gnu-1: 115.596MB (installed: 23.387MB)
cleaning: pixman-0.40.0-x86_64-linux-gnu-1
reporting: devel/pixman-0.40.0-1.cfg -> pixman-0.40.0-x86_64-linux-gnu-1.txt
reporting: devel/pixman-0.40.0-1.cfg -> pixman-0.40.0-x86_64-linux-gnu-1.xml
config: devel/glib-2.48.2-1.cfg
package: glib-2.48.2-x86_64-linux-gnu-1
building: glib-2.48.2-x86_64-linux-gnu-1
sizes: glib-2.48.2-x86_64-linux-gnu-1: 165.590MB (installed: 25.780MB)
cleaning: glib-2.48.2-x86_64-linux-gnu-1
reporting: devel/glib-2.48.2-1.cfg -> glib-2.48.2-x86_64-linux-gnu-1.txt
reporting: devel/glib-2.48.2-1.cfg -> glib-2.48.2-x86_64-linux-gnu-1.xml
config: devel/qemu-git-1.cfg
package: qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1
git: clean: git://git.qemu-project.org/qemu.git
git: pull: git://git.qemu-project.org/qemu.git
git: checkout: git://git.qemu-project.org/qemu.git => 42d58e7c6760cb9c55627c28ae538e27dcf2f144
git: submodule: git://git.qemu-project.org/qemu.git <= dtc
building: qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1
error: building qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1
Build FAILED
See error report: rsb-report-qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1.txt
error: building qemu-42d58e7c6760cb9c55627c28ae538e27dcf2f144-x86_64-linux-gnu-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:10:25 2022
==============================================================================
Report: devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gettext-0.18.3.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
Package: gettext-0.18.3.1-x86_64-linux-gnu-1
Config: devel/gettext-0.18.3.1-1.cfg
Summary:
GetText offers to programmers, translators, and even users, a well
integrated set of tools and documentation.
URL:
http://www.gnu.org/software/gettext/
Version:
0.18.3.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/pub/gnu/gettext/gettext-0.18.3.1.tar.gz
sha256: 0d8f9a33531b77776b3dc473e7940019ca19bfca5b4c06db6e96065eeb07245d
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_gettext="gettext-0.18.3.1"
%setup source gettext -q -n gettext-0.18.3.1
%setup patch gettext -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gettext}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:10:25 2022
==============================================================================
Report: devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gettext-0.18.3.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gettext-0.18.3.1-1.cfg
------------------------------------------------------------------------------
Package: gettext-0.18.3.1-x86_64-linux-gnu-1
Config: devel/gettext-0.18.3.1-1.cfg
Summary:
GetText offers to programmers, translators, and even users, a well
integrated set of tools and documentation.
URL:
http://www.gnu.org/software/gettext/
Version:
0.18.3.1
Release:
1
Sources: 1
1: http://ftp.gnu.org/pub/gnu/gettext/gettext-0.18.3.1.tar.gz
sha256: 0d8f9a33531b77776b3dc473e7940019ca19bfca5b4c06db6e96065eeb07245d
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_gettext="gettext-0.18.3.1"
%setup source gettext -q -n gettext-0.18.3.1
%setup patch gettext -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gettext}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:10:30 2022
==============================================================================
Report: devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libffi-3.0.13-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
Package: libffi-3.0.13-x86_64-linux-gnu-1
Config: devel/libffi-3.0.13-1.cfg
Summary:
LibFFI provides a portable, high level programming interface to
various calling conventions.
URL:
https://sourceware.org/libffi/
Version:
3.0.13
Release:
1
Sources: 1
1: https://sourceware.org/pub/libffi/libffi-3.0.13.tar.gz
sha256: 1dddde1400c3bcb7749d398071af88c3e4754058d2d4c0b3696c2f82dc5cf11c
Patches: 1
1: http://git.rtems.org/rtems-tools/plain/tools//libffi/libffi-pkg-config-lib64-fix.diff
sha256: f858658b7b57db13002987b7d6bb0293f181519032bf4dd36969ccb79d6b16a3
Preparation:
build_top=$(pwd)
source_dir_libffi="libffi-3.0.13"
%setup source libffi -q -n libffi-3.0.13
%setup patch libffi -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_libffi}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:10:30 2022
==============================================================================
Report: devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libffi-3.0.13-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libffi-3.0.13-1.cfg
------------------------------------------------------------------------------
Package: libffi-3.0.13-x86_64-linux-gnu-1
Config: devel/libffi-3.0.13-1.cfg
Summary:
LibFFI provides a portable, high level programming interface to
various calling conventions.
URL:
https://sourceware.org/libffi/
Version:
3.0.13
Release:
1
Sources: 1
1: https://sourceware.org/pub/libffi/libffi-3.0.13.tar.gz
sha256: 1dddde1400c3bcb7749d398071af88c3e4754058d2d4c0b3696c2f82dc5cf11c
Patches: 1
1: http://git.rtems.org/rtems-tools/plain/tools//libffi/libffi-pkg-config-lib64-fix.diff
sha256: f858658b7b57db13002987b7d6bb0293f181519032bf4dd36969ccb79d6b16a3
Preparation:
build_top=$(pwd)
source_dir_libffi="libffi-3.0.13"
%setup source libffi -q -n libffi-3.0.13
%setup patch libffi -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_libffi}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:10:48 2022
==============================================================================
Report: devel/pixman-0.40.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/pixman-0.40.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/pixman-0.40.0-1.cfg
------------------------------------------------------------------------------
Package: pixman-0.40.0-x86_64-linux-gnu-1
Config: devel/pixman-0.40.0-1.cfg
Summary:
Pixman is a low-level software library for pixel manipulation,
providing features such as image compositing and trapezoid
rasterization.
URL:
http://www.pixman.org/
Version:
0.40.0
Release:
1
Sources: 1
1: http://cairographics.org/releases/pixman-0.40.0.tar.gz
sha512: 063776e132f5d59a6d3f94497da41d6fc1c7dca0d269149c78247f0e0d7f520a25208d908cf5e421d1564889a91da44267b12d61c0bd7934cd54261729a7de5f
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_pixman="pixman-0.40.0"
%setup source pixman -q -n pixman-0.40.0
%setup patch pixman -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_pixman}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --disable-gtk --disable-libpng
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:10:48 2022
==============================================================================
Report: devel/pixman-0.40.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/pixman-0.40.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/pixman-0.40.0-1.cfg
------------------------------------------------------------------------------
Package: pixman-0.40.0-x86_64-linux-gnu-1
Config: devel/pixman-0.40.0-1.cfg
Summary:
Pixman is a low-level software library for pixel manipulation,
providing features such as image compositing and trapezoid
rasterization.
URL:
http://www.pixman.org/
Version:
0.40.0
Release:
1
Sources: 1
1: http://cairographics.org/releases/pixman-0.40.0.tar.gz
sha512: 063776e132f5d59a6d3f94497da41d6fc1c7dca0d269149c78247f0e0d7f520a25208d908cf5e421d1564889a91da44267b12d61c0bd7934cd54261729a7de5f
Patches: 0
Preparation:
build_top=$(pwd)
source_dir_pixman="pixman-0.40.0"
%setup source pixman -q -n pixman-0.40.0
%setup patch pixman -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_pixman}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --disable-gtk --disable-libpng
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:11:39 2022
==============================================================================
Report: devel/glib-2.48.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/glib-2.48.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/glib-2.48.2-1.cfg
------------------------------------------------------------------------------
Package: glib-2.48.2-x86_64-linux-gnu-1
Config: devel/glib-2.48.2-1.cfg
Summary:
GLib provides the core application building blocks for
libraries and applications written in C.
URL:
https://developer.gnome.org/glib/
Version:
2.48.2
Release:
1
Sources: 1
1: http://ftp.gnome.org/pub/gnome/sources/glib/2.48/glib-2.48.2.tar.xz
sha256: f25e751589cb1a58826eac24fbd4186cda4518af772806b666a3f91f66e6d3f4
Patches: 1
1: https://gitlab.gnome.org/GNOME/glib/commit/566e1d61a500267c7849ad0b2552feec9c9a29a6.patch
sha512: Mz3YZfEOLgNA6eSUzg8y1yiGk0S5YFbYmWRcGyrcRHhmu8mUzuneWmsj6OYXG09zAvBLApxrEGqvaI0iJNhAMg==
Preparation:
build_top=$(pwd)
source_dir_glib="glib-2.48.2"
%setup source glib -q -n glib-2.48.2
%setup patch glib -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
SYSROOT=$SB_TMPPREFIX
PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT LD_LIBRARY_PATH=$SYSROOT/lib ../${source_dir_glib}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --with-sysroot=$SYSROOT --disable-dtrace --with-pcre=internal
LD_LIBRARY_PATH=$SYSROOT/lib make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sat Mar 5 05:11:39 2022
==============================================================================
Report: devel/glib-2.48.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 52ca7d38aae2dacc45c56f2819befe21124b1476
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/glib-2.48.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/glib-2.48.2-1.cfg
------------------------------------------------------------------------------
Package: glib-2.48.2-x86_64-linux-gnu-1
Config: devel/glib-2.48.2-1.cfg
Summary:
GLib provides the core application building blocks for
libraries and applications written in C.
URL:
https://developer.gnome.org/glib/
Version:
2.48.2
Release:
1
Sources: 1
1: http://ftp.gnome.org/pub/gnome/sources/glib/2.48/glib-2.48.2.tar.xz
sha256: f25e751589cb1a58826eac24fbd4186cda4518af772806b666a3f91f66e6d3f4
Patches: 1
1: https://gitlab.gnome.org/GNOME/glib/commit/566e1d61a500267c7849ad0b2552feec9c9a29a6.patch
sha512: Mz3YZfEOLgNA6eSUzg8y1yiGk0S5YFbYmWRcGyrcRHhmu8mUzuneWmsj6OYXG09zAvBLApxrEGqvaI0iJNhAMg==
Preparation:
build_top=$(pwd)
source_dir_glib="glib-2.48.2"
%setup source glib -q -n glib-2.48.2
%setup patch glib -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "" -o "x86_64-linux-gnu" == "" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
SYSROOT=$SB_TMPPREFIX
PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT LD_LIBRARY_PATH=$SYSROOT/lib ../${source_dir_glib}/configure --prefix=/home/tester/rtems-cron-5/tools/5 --bindir=/home/tester/rtems-cron-5/tools/5/bin --exec_prefix=/home/tester/rtems-cron-5/tools/5 --includedir=/home/tester/rtems-cron-5/tools/5/include --libdir=/home/tester/rtems-cron-5/tools/5/lib --libexecdir=/home/tester/rtems-cron-5/tools/5/libexec --mandir=/home/tester/rtems-cron-5/tools/5/share/man --infodir=/home/tester/rtems-cron-5/tools/5/share/info --datadir=/home/tester/rtems-cron-5/tools/5/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --with-sysroot=$SYSROOT --disable-dtrace --with-pcre=internal
LD_LIBRARY_PATH=$SYSROOT/lib make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list